ZH
RU
ES

iso pipe thread

iso pipe thread, Total:189 items.

In the international standard classification, iso pipe thread involves: Screw threads, Fasteners for aerospace construction, Fasteners, Cutting tools, Hand-held tools, Linear and angular measurements, Pipeline components and pipelines, Tobacco, tobacco products and related equipment, Road vehicle systems, Technical drawings, Aerospace fluid systems and components.

BE-NBN, iso pipe thread

• NBN 902-1970
• NBN E 66-101-1973
• NBN 820-1970
• NBN 719 F-1967
• NBN 586-1962
• NBN 553 F-1966
• NBN 554 F-1966
• NBN-EN ISO 1478:1994 Tapping screws thread (ISO 1478:1983)
• NBN 624 F-1966
• NBN 623 F-1966
• NBN 720 F-1967

IN-BIS, iso pipe thread

• IS 12325-1988

German Institute for Standardization, iso pipe thread

• DIN 76-2:1984-12 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
• DIN 76-2:1984 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
• DIN 2999-1:1983 Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions
• DIN 431:2000 Pipe nuts with thread according to DIN ISO 228-1
• DIN 103-2:1977 ISO Metric Trapezoidal Screw Thread; General Plan
• DIN 8140-2:2005-08 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
• DIN 3858:1988 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
• DIN 2981:1982 Theraded steel pipe fittings; Fittings with long screw thread
• DIN 3858:2005 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
• DIN 40431-2:1972-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
• DIN 40431-1:1970-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
• DIN 76-1:2016 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
• DIN 76-1:2004 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
• DIN 8140-2:2005 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
• DIN 40431-2:1972 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
• DIN 86103:2019-09 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
• DIN 852-1:1991 Bore type thread milling cutters for ISO metric threads; dimensions
• DIN ISO 6410-2:1993-12 Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993
• DIN EN 10241:2000 Steel threaded pipe; German version EN 10241:2000
• DIN EN 10241:2000-08 Steel threaded pipe; German version EN 10241:2000
• DIN 3858:2005-08 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
• DIN 2278:1967 Dirt Grooves on Screw Thread Gauges for Screw Threads with ISO Metric Profile
• DIN 14-3:1987 ISO-metric screw thread; screw threads below 1 mm diameter; tolerances
• DIN 40431-1:1970 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges

Association Francaise de Normalisation, iso pipe thread

• NF L40-113:1987 Aerospace fitting joint assembly, radial sealing. Internal thread bosses. ISO metric thread profile and tolerances. Dimensions.
• NF L22-208:1984 Bolt, hexagonal head, threaded to head. ISO thread.
• NF L22-293:1979 Slotted cheese ehad screws, fully threaded. ISO thread.
• NF ISO 2901:2016 Filetages métriques trapézoïdaux ISO - Profils de base et nominal
• NF L22-294:1979 Slotted raised cheese head screws, fully threaded. ISO thread.
• NF L22-291:1979 Slotted 90 degrees countersunk head screws, fully threaded. ISO thread.
• NF L22-292:1979 Slotted 60 degrees countersunk head screws, fully threaded. ISO thread.
• NF L22-298:1979 Hexagon socket head cap screws, fully threaded. ISO thread.
• NF L22-209:1984 Bolt, hexagonal head, with locking hole threaded to head. ISO thread.
• NF L22-201:1984 Bolt, hexagonal head, short thread, close tolerance. ISO thread.
• NF E03-005:1981 Pipe threads where pressure tight joints are not made on the threads (parallel internal and external threads).
• NF L05-200:1952 Metric screw threads. Sim profile (rech.).
• NF L05-200:1966 METRIC SCREW THREADS. SIM PROFILE. (RECH.).
• NF E03-500*NF ISO 1501:2009 ISO miniature screw threads
• NF L22-296:1979 Slotted and drilled cheese head screws, fully threaded. ISO thread.
• NF L22-275:1982 Pan head screws, fully threaded,B.N.A.E. Cross recess. ISO thread.
• NF E66-120:1975 Hand taps for pipe threads for parallel and taper threads.
• NF L22-202:1984 Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.
• NF ISO 1501:2009 Filetages miniatures ISO
• NF E03-004:1981 Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).
• NF E03-620:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for internal threads.
• NF L40-105:1973 Connectors, axial sealing. Internal thread bosses, ISO metric thread profile and tolerances.
• NF L22-259:1982 100 degrees countersunk head screws, fully threaded B.N.A.E. Cross recess. ISO thread.
• NF E03-619:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for external threads.
• NF L46-313:1979 Screwed sealing plugs, radial sealing. ISO metric thread profile and tolerances.
• NF L46-315:1979 Screwed sealing plugs, axial sealing. ISO metric thread profile and tolerances.

CH-SNV, iso pipe thread

• VSM 12041-1967
• VSM 13190.4-1967
• SN 258 405-1979 Die Angaben in dieser Norm entsprechen weitgehend den Fest-legungen der von der Internationalen Organisation für Nor-mung, ISO, herausgegebenen Internationalen Norm ISO 1829 ■ 1975. (Siehe Erl?uterungen.)
• VSM 23707-1971
• SN 213 163-1979
• VSM 10336.16-1946
• SN 029 100-1983 This standard is a translation of the original bilingual (German/French) Swiss Standard
• SNV 81105-1942
• VSM 23731-1972
• VSM 11884-1942
• SEV 3036-1963
• SEV 0182-1956
• SN 214 057-1984 Testing of welds, notch toughness testing

Standard Association of Australia （SAA）, iso pipe thread

• AS 1722.2:1992 Pipe threads of Whitworth form - Fastening pipe threads
• AS 1722.1:1975 Pipe threads of Whitworth form Part 1: Sealing pipe threads (metric units)

CZ-CSN, iso pipe thread

• CSN ON 22 3214-1968
• CSN ON 22 3322-1963
• CSN 25 4621-1960 Screw gauges. Screw pitch gauges for whitworth thread and pipe thread
• CSN 22 3009-1983 Taps for cylindrical pipe thread. Thread tolerances
• CSN 13 8281-1986 Locking nuts with pipe threads
• CSN 01 4033-1985 Cylindrícal pipe threads for gas tubes and screwed fittings

AT-ON, iso pipe thread

• ONORM M 1500-1973 ISO metric screw threads; thread profile Filetages me'triques ISO; profil de filetage
• ONORM M 1515-1968
• ONORM M 2012-1983 Tapped holes and screwed plugs with metric pipe thread, fine, for pipe unions, jitüngs and screw plugs; design dimensions
• ONORM M 1804-1987 Thread ends and lengths of holt ends for metric ISO-threads
• ONORM M 1900-1980 Sealing rings for screwed pipe ions and screw plugs
• ONORM M 5144-1980 Eye bolts; Metrie ISO-thread
• ONORM M 5103-1968

SE-SIS, iso pipe thread

• SIS SMS 300-1931
• SIS SS 1964-1989 Threaded blind holes — ISO metric screw threads — Coarse pitch
• SIS SMS 1964-1976 Threaded blind holes. ISO metric screw threads. Coarse pitch
• SIS SMS 491-1973 Taper pins with threaded end. ISO inch screw threads. Coarse pitch
• SIS SMS 87-1973 Taper pins with threaded end. ISO metric screw threads. Coarse pitch
• SIS SMS-302-1931
• SIS SS 1717-1988 ISO inch screw threads — Selected sizes for screw threads with fine pitch
• SIS SMS 2-1972 ISO metric screw threads. Selected sizes for screw threads with coarse pitch
• SIS SS 1716-1988 ISO inch screw threads — Selected sizes for screw threads with coarse pitch
• SIS SS 1257-1991 Fittings for piping — Intemally threaded long connections with pipe threads ISO 228- 1-G
• SIS SS 1259-1991 Fittings forpiping — Internally threaded short connections with pipe threads ISO 228-1-G
• SIS SS 2639-1987 Screwing dies - Taper pipe threads R
• SIS SS 3218-1984 Threaded stainless steel pipe fittings - Barrel nipples with external taper pipe threads
• SIS SS 1258-1991 Fittings for piping — Externally threaded short connections with pipe threads ISO 228- 1-G- or ISO 7- 1-R
• SIS SS 1747-1979 Screw calliper gauges — Profiles and tolerances for ISO inch screw threads
• SIS SS 3194-1988 ISO inch screw threads- Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes
• SIS SMS 36-1972 Parallel pipe threads
• SIS SMS 295-1972 Taper pipe threads
• SIS SS 1915-1986 Lifting eye bolts - ISO inch threads
• SIS SS 1916-1983 Lifting eye nuts - ISO inch threads
• SIS SS 1915-1985 Lifting eye bolts - ISO inch threads
• SIS SS 1915-1983 Lifting eye bolts - ISO inch threads
• SIS SS 1914-1983 Lifting eye nuts - ISO metric threads
• SIS SMS 1746-1976 Screw ring gauges. Profiles and tolerances. ISO inch screw threads
• SIS SS-ISO 4755:1986 Fasteners - Thread undercuts for external metric ISO threads
• SIS SS 1925-1988 ISO inch screw threads with coarse pitch - Screw thread tolerances for metal end of studs

American Society of Mechanical Engineers (ASME), iso pipe thread

• USAS B2.1-1968 Pipe Threads (Except DryseaI)

FI-SFS, iso pipe thread

• SFS 2197-1967
• SFS 2013-1966

Korean Agency for Technology and Standards (KATS), iso pipe thread

• KS B 3275-2002(2012) CIRCULAR SCREWING DIES FOR TAPER PIPE THREADS
• KS B 3275-1987 CIRCULAR SCREWING DIES FOR TAPER PIPE THREADS
• KS B 3274-2002(2012) CIRCULAR SCREWING DIES FOR PARALLEL PIPE THREADS
• KS B 3274-1987 CIRCULAR SCREWING DIES FOR PARALLEL PIPE THREADS
• KS B 0223-1986(2011) Screw Threads for Rigid Metal Conduits and Fittings
• KS B 5223-2001(2016) Screw thread limit gauges for parallel pipe threads
• KS B 5223-1985 Screw thread limit gauges for parallel pipe threads
• KS B 5223-2001(2021) Screw thread limit gauges for parallel pipe threads
• KS B 0222-2007(2017) Taper pipe threads
• KS B 0222-1987 Taper pipe threads

RO-ASRO, iso pipe thread

• STAS 3508/2-1970 SCREW THREAD RUNOUT AND UNDERCUT Pipe thread
• STAS 1112/15-1990 Screw cutting tools. Taps for pipe threads. Thread tolerances
• STAS 2298-1983 Serew cutting tools STRAIGHT COMBS FOR ISO METRIC THREAD AND GAZ THREAD WITH THREAD PACKING
• STAS 2114/5-1975 iso trapezoidal screw threads Limits of size for internal seiew thread
• STAS 3508/1-1980 THREAD RUN.-OUT AND UNDERCUT ISO general purpose metric screw thread
• STAS 6371-1973 ISO genera! purpose inetric scrcw thrcads BASIC PROFJI,
• STAS 2114/6-1975 ISO TRAREZOIDAL SCREW THREADS Limits of size for external scrcw thiread
• STAS 8957-1971 CIRCULAR SCREWING DIES FOR GAS PIPE THREAD WITH THREAD TIGHTENING Dimensions

BR-ABNT, iso pipe thread

• ABNT P-NB-183-1970
• ABNT NB-97 Pt.2-1973
• ABNT NB-97 Pt.1-1973
• ABNT NB-97 Pt.3-1973

ZA-SANS, iso pipe thread

• SANS 1700-2-13:2003 Fasteners Part 2: Screw threads Section 13: Tapping screws thread

IT-UNI, iso pipe thread

• UNI 4649-1961
• UNI 5710-1965
• UNI 7456-1975

Professional Standard - Machinery, iso pipe thread

• JB/T 10031-1999 Gauges for pipe threads where pressure-tight joints are made on the threads
• JB/T 9995-1999 Taper tap for 55°straight pipe threads. Thread tolerance

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, iso pipe thread

• GB/T 10922-1989 Gauges for pipe threads where pressure-tight joints are not made on the threads
• GB/T 14171-1993 Motor vehicles--Pneumatic braking systems--Tapped holes and male fittings
• GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
• GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads

U.S. Military Regulations and Norms, iso pipe thread

• ARMY A-A-59326/14 B-2011 REDUCER, EXTERNAL PIPE THREAD BY FEMALE, TYPE XIII

Society of Automotive Engineers (SAE), iso pipe thread

• SAE AS4861-2002 BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
• SAE AS4861A-2013 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
• SAE AS4861B-2016 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
• SAE AS896-1976 NIPPLE, FLARELESS TUBE TO MALE PIPE
• SAE AS4854A-2013 FITTING, ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREAD
• SAE AS4855A-2013 FITTING, ELBOW, 45°, PIPE, INTERNAL AND EXTERNAL THREAD

SAE - SAE International, iso pipe thread

• SAE AS4861-1995 Bushing@ Pipe@ Internal and External Thread (FSC 4730; Should Be Used Instead of AN912 REV 9@ Which Was Cancelled on 8 February 1999)
• SAE AS4861A-2003 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
• SAE AS4854A-2003 FITTING, ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREAD

Danish Standards Foundation, iso pipe thread

• DS 44:1967 Internal thread runout and undercut. ISO metric thread
• DS/ISO 1501:2009 ISO miniature screw threads

British Standards Institution (BSI), iso pipe thread

• BS ISO 68-1:1998+A1:2020 ISO general purpose screw threads. Basic profile. Metric screw threads
• BS ISO 68-2:1998+A1:2020 ISO general purpose screw threads. Basic profile. Inch screw threads
• BS ISO 1501:2009 ISO miniature screw threads
• BS ISO 1501:2009+A1:2020 ISO miniature screw threads

YU-JUS, iso pipe thread

• JUS M.B1.035-1979 ISO exterml metric trapezoidal screw threads, knuckle screw threads and other screw threads ofcoarse pitches. Runouts and undercuts
• JUS M.B1.036-1979 SO internat trapezoidal screw threads, knuckle screw treads and other screw threa?s of coarse pitches. Runouts and undercuts
• JUS M.B0.510-1981 Metric screw thread with trianguiar ISO—profile. Gauges for extemal threads. Tolerances for thread gauges
• JUS M.B0.514-1981 ISO Metric trapezoidal screw threads. Gauges for external and internat screw threads. Tolerances far thread gauges
• JUS M.B0.511-1981 Metne screw thread with tnangular li>U-protile. bauges tor internat tnreaas. loierances ror znreaa gauges

International Organization for Standardization (ISO), iso pipe thread

• ISO 1501:2009 ISO miniature screw threads
• ISO 3508:1976 Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
• ISO 4755:1983 Fasteners; Thread undercuts for external metric ISO threads

RU-GOST R, iso pipe thread

• GOST 21973-1976 Threaded piping joints. Joining threads. Series

GOSTR, iso pipe thread

• GOST R 59110-2020 Motor vehicles. Fasteners. Thread run-outs and thread undercuts for ISO metric threads

API - American Petroleum Institute, iso pipe thread

• API SPEC 5B KAZAKH-2008 Specification for Threading@ Gauging and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (FIFTEENTH EDITION)
• API STD 5B-1988 Specification for Threading@ Gaging@ and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (THIRTEENTH EDITION)

Professional Standard - Tobacco, iso pipe thread

• YC/T 230-2007 Pipe threads with 80 degree

Japanese Industrial Standards Committee (JISC), iso pipe thread

• JIS B 0203:1982 Taper pipe threads
• JIS B 0203:1999 Taper pipe threads
• JIS B 1018:2009 Fasteners -- Thread undercuts for external metric ISO threads

Professional Standard - Aerospace, iso pipe thread

• QJ 562-1981 threaded casing

Taiwan Provincial Standard of the People's Republic of China, iso pipe thread

• CNS 4108-1977 Coupling Threads for Hydraulic or Pneumatic Piping (Pipe Threads)

Lithuanian Standards Office , iso pipe thread

• LST EN ISO 6410-2:2001 Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts (ISO 6410-2:1993)
• LST EN ISO 1478:2001 Tapping screws thread (ISO 1478:1999)

AENOR, iso pipe thread

• UNE-EN ISO 1478:2000 TAPPING SCREWS THREAD (ISO 1478:1999)

TH-TISI, iso pipe thread

• TIS 2418-2008 Fasteners.thread undercuts for external metric iso thread

Others:   iso pipe thread, Threaded pipe joint standard, din pipe thread, iso pipe thread, dn pipe thread, din threaded pipe, iso pipe thread, Imperial thread iso, Copper pipe fitting pipe thread, mj thread iso, threaded plug iso, Pipe Thread Design, threaded pipe, Threaded pipe specification, Threaded pipe specification, Threaded fittings, pipe thread, Seal pipe thread, non-sealed pipe thread, Pipe thread seat.