ZH
RU
ES

Solid sample density

Solid sample density, Total:499 items.

In the international standard classification, Solid sample density involves: Non-ferrous metals, Fuels, Waxes, bituminous materials and other petroleum products, Shipbuilding and marine structures in general, Wastes, Inorganic chemicals, Construction materials, Coals, Fertilizers, Analytical chemistry, Environmental protection, Non-metalliferous minerals, Measurement of volume, mass, density, viscosity, Refractories, Protection against fire, Optics and optical measurements, Products of the textile industry, Road engineering, Quantities and units, Cutting tools, Products of the chemical industry, Organic chemicals, Particle size analysis. Sieving, Earthworks. Excavations. Foundation construction. Underground works, Petroleum products in general, Plastics, Cork and cork products, Soil quality. Pedology, Civil engineering in general, Electrical and electronic testing, Semiconductor devices, Ceramics, Vocabularies, Special purpose vehicles, Laboratory medicine, Mining and quarrying, Powder metallurgy, Solar energy engineering, Paint ingredients, Air quality, Crude petroleum, Lubricants, industrial oils and related products, Pipeline components and pipelines, Nuclear energy engineering, Paper and board, Structures of buildings, Road vehicles in general, Fluid power systems, Milk and milk products, Metalliferous minerals, Wood, sawlogs and sawn timber, Pharmaceutics, Insulating materials, Adhesives, Natural gas, Optoelectronics. Laser equipment, Fasteners, Mechanical testing, Paint coating equipment.

International Truck and Engine Corporation (ITEC), Solid sample density

INTERN CEMS BT-32-2009 Apparent Density Of Solid Matter Test

International Federation of Trucks and Engines, Solid sample density

NAVISTAR CEMS BT-32-2009 Apparent Density Of Solid Matter Test
NAVISTAR MPAPS BT-32-2014 Apparent Density of Solid Matter Test

German Institute for Standardization, Solid sample density

DIN 51705:2001-06 Testing of solid fuels - Determination of the bulk density of solid fuels
DIN 51701-5:2008-03 Testing of solid fuels - Sampling and sample preparation - Part 5: Testing of precision
DIN 51705:2001 Testing of solid fuels - Determination of the bulk density of solid fuels
DIN 51925:1996 Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants
DIN 51901:1980 Testing of carbon materials; determination of density by the xylene method, solid matters
DIN 51701-2:2006 Testing of solid fuels - Sampling and sample preparation - Part 2: Sampling
DIN 51701-3:2006 Testing of solid fuels - Sampling and sample preparation - Part 3: Sample preparation
DIN 51901:2006 Testing of carbonaceous materials - Determination of density by the xylene method - Solid materials
DIN 51901:2006-11 Testing of carbonaceous materials - Determination of density by the xylene method - Solid materials
DIN 66137-1:2003 Determination of solid state density - Part 1: Principles
DIN EN ISO 17828:2016-05 Solid biofuels - Determination of bulk density (ISO 17828:2015); German version EN ISO 17828:2015
DIN CEN/TS 15401:2010-09*DIN SPEC 1122:2010-09 Solid recovered fuels - Determination of bulk density; German version CEN/TS 15401:2010
DIN 66137-2:2004 Determination of solid state density - Part 2: Gaspycnometry
DIN 66137-3:2005 Determination of solid state density - Part 3: Gas buoyancy method
DIN 51718:2002 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN 51701-2:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 2: Sampling
DIN 51701-4:2006 Testing of solid fuels - Sampling and sample preparation - Part 4: Equipment
DIN 51916:2013 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN 51940:2012-03 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN 54408:1998 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN 51701-3:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 3: Sample preparation
DIN 51916:1987 Testing of carbon materials; determination of apparent density after tamping; solid materials
DIN 51916:2012 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN 51916:2013-12 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN 18124:2019-02 Soil, investigation and testing - Determination of density of solid particles - Wide mouth pycnometer
DIN 51701-5:2008 Testing of solid fuels - Sampling and sample preparation - Part 5: Testing of precision
DIN 54408:2007 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN 51701-1:2007-12 Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions
DIN 51701-4:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 4: Equipment
DIN SPEC 1122:2010 Solid recovered fuels - Determination of bulk density; German version CEN/TS 15401:2010
DIN 51750-3:2023-05 Testing of mineral oils - Sampling - Pasty and solid materials
DIN CEN/TS 15405:2010-11*DIN SPEC 1152:2010-11 Solid recovered fuels - Determination of density of pellets and briquettes; German version CEN/TS 15405:2010
DIN 66137-3:2019-03 Determination of solid state density - Part 3: Gas buoyancy method
DIN 51701-1:2007 Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions
DIN EN 15103:2010 Solid biofuels - Determination of bulk density; German version EN 15103:2009
DIN 51940:2012 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN 51940:1992 Testing of carbon materials; sampling and sample preparation; solid materials, solid binders and impregnants
DIN 51913:2013-05 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN 54385:2016 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
DIN 54385:2016-08 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
DIN EN ISO 18847:2016-12 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016); German version EN ISO 18847:2016
DIN 54408:2007-10 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN EN 15150:2012 Solid biofuels - Determination of particle density; German version EN 15150:2011
DIN EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004); German version EN ISO 3838:2004
DIN EN 12697-6:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens; German version EN 12697-6:2003+A1:2007
DIN 52170-1:1980 Determination of composition of hardened concrete; general, terms, sampling, dry-bulk density
DIN EN ISO 17828:2016 Solid biofuels - Determination of bulk density (ISO 17828:2015); German version EN ISO 17828:2015
DIN 5014:2019 Testing of paper and board - Compressive strength of an in s-shape fixed sample
DIN 5014:2019-04 Testing of paper and board - Compressive strength of an in s-shape fixed sample
DIN EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016); German version EN ISO 18847:2016
DIN 18125-1:2010 Soil, investigation and testing - Determination of density of soil - Part 1: Laboratory tests
DIN 51913:2001 Testing of carbon materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN 51930:2006 Testing of carbonaceous materials - Preparation of extruded samples of calcinated cokes - Solid materials
DIN EN ISO 3838:2004-09 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004); German version EN ISO 3838:2004
DIN 51913:2013 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN EN ISO 18847:2023-07 Solid biofuels - Determination of particle density of pellets and briquettes (ISO/DIS 18847:2023); German and English version prEN ISO 18847:2023 / Note: Date of issue 2023-05-26*Intended as replacement for DIN EN ISO 18847 (2016-12).
DIN EN 772-13:2000-09 Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone); German version EN 772-13:2000

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Solid sample density

GB/T 43139-2023 Density testing of cast aluminum alloy liquid reduced pressure solidification samples
GB/T 8928-2008 Standard test method for density of semi-sold and solid asphalt
GB/T 10671-1989 Test method for specific optical density of smoke generated by solid materials
GB/T 10671-2023 Specific optical density test method for smoke production from solid materials
GB/T 10671-2008 Test method for specific optical density of smoke generated by solid materials
GB/T 32553-2016 Fluorspar.Method of determining the precision of sampling and sample preparation
GB/T 29617-2013 Determination of density,relative density,and API gravity of liquids by digital density meter
GB/T 2007.4-2008 General rules for the sampling and sample preparation of minerals in bulk-Experimental methods for checking the precision and bias
GB/T 43088-2023 Method for determination of dislocation density in metallic thin crystal specimens by microbeam analysis and electron microscopy
GB/T 13377-1992 Crude petroleum and liquid or solid petroleum products--Determination of density or relative density--Capillary stoppered pyknometer and graduated bicapillary pyknometer method
GB/T 13377-2010 Crude petroleum and liquid or solid petroleum products.Determination of density or relative density.Capillary stoppered pyknometer and graduated bicapillary pyknometer methods
GB/T 9966.3-2020 Test methods for natural stone—Part 3:Determination of water absorption,bulk density,true density and true porosity
GB/T 2999-2016 Test method for bulk density of refractory particles
GB/T 2999-2002 Refractory materials--Determination of bulk density of granular materials
GB/T 19494.3-2004 Mechanical sampling of coal-Part 3:Determination of pracision and bias test
GB/T 22376.2-2008 Adhesives-Methods of preparing bulk specimens-Part 2: Elevatde-temperature-curing one-part systems
GB/T 22376.2-2008 Adhesives-Methods of preparing bulk specimens-Part 2: Elevatde-temperature-curing one-part systems
GB/T 17911.3-1999 Refractory ceramic fibre products--Determination of bulk density
GB/T 9966.3-2001 Test methods for natural facing stones Part 3: Test methods for bulk density,true density,true porosity and water absorption

RO-ASRO, Solid sample density

STAS 9622/1-1986 SOLID FUELS Densimetric analysis
STAS SR 13190-1994 Solid fuel Determinalion of density
STAS 6257-1980 SOLID ELECTROINSULATING MATERIALS Methods of test for electric strength

American Society for Testing and Materials (ASTM), Solid sample density

ASTM D2320-98(2017) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D2320-98(2022)e1 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM E1109-86(2004) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E1109-86(1996) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E1109-86(2009) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM D3289-17(2022) Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
ASTM D3289-17 Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
ASTM E1109-18 Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E1109-19 Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM D4892-89(1999)e1 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM D4892-14(2019)e1 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM C914-09(2022) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09(2022)e1 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM D2591-07(2020) Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
ASTM E662-13 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-12 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-21ae1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-14 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-15a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-13a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-13b Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-12a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM C914-95(1999) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM D2591-07(2013) Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
ASTM UOP762-76 Apparent Bulk Density of Solid Phosphoric Acid Catalyst
ASTM D8188-18 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
ASTM D4052-96 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D4052-96(2002)e1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D4052-09 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM E662-03e2 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-03e1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-03 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D6683-01 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids
ASTM E662-01 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-97 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-21 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-06e1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D854-06e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D70-18a Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D71-94(2019) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
ASTM D70-18 Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D854-14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D2320-98(2008) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D2320-98(2012) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM UOP851-08 Density of Powders and Solids by Helium Displacement
ASTM D4052-11 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D2591-01 Method of Test for Linear Density of Elastomeric Yarn (Short Length Speciments)
ASTM E662-06 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-15 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-13c Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-13d Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D1769-77(1982)e1 Method of Test for Linear Density of Cotton Fibers (Array Sample)
ASTM C914-95(2004) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09(2015) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM D4052-18a Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D4052-18 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D4052-16 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D8188-23 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
ASTM UOP851-84 Density of Powders and Solids by Helium Displacement
ASTM D2591-07 Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
ASTM E662-18 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D71-94(1999) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
ASTM D71-94(2004) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
ASTM D4892-89(2004) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM E662-21a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-05 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-09 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D70-97 Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM E662-17a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-17 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-19 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D71-94(2009) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
ASTM D4892-89(2009) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM D5947-18 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D3505-96 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
ASTM D3505-18 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
ASTM D4052-22 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D6717-07(2012) Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM D70/D70M-21 Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D4892-14 Standard Test Method for Density of Solid Pitch 40;Helium Pycnometer Method41;
ASTM D4052-15 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D7777-12 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
ASTM D6347/D6347M-05 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-96 Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-09 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
ASTM D6717-01 Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM F6-60(1982) Test Method for Bulk Density of Germanium Dioxide
ASTM D1217-93(1998) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D5947-02 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-06 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-03 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-96 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-01e1 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D6717-07 Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM D1188-07 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1188-07(2015) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM C1770-21 Standard Test Method for ?Determination of Loose and Tapped Bulk Densities of Small Quantities of Plutonium Oxide
ASTM C1770-13 Standard Test Method for ???Determination of Loose and Tapped Bulk Density of Plutonium Oxide
ASTM D1217-93(2003)e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D6683-08 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
ASTM D2726-10 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D5947-11 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM UOP1025-18 Density of Viscous Liquids and Semi-Solid Hydrocarbons by Nitrogen Displacement
ASTM D5835-95 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D5835-95(2001) Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D1188-07e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1188/D1188M-22 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples
ASTM C1892/C1892M-22 Standard Test Methods for Strength of Anchors in Masonry
ASTM D70-09e1 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM D1070-03 Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D1070-03(2010) Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D1070-85(1998) Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D291/D291M-20 Standard Test Method for Bulk Density of Crushed Bituminous Coal
ASTM D1070-03(2017) Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D1217-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D1657-22e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D1188-96e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D1188-96(2002) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D1188-96(2002)e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D374/D374M-16 Standard Test Methods for Thickness of Solid Electrical Insulation
ASTM D374/D374M-23 Standard Test Methods for Thickness of Solid Electrical Insulation
ASTM D2780-92(1997) Standard Test Method for Solubility of Fixed Gases in Liquids
ASTM D3429-93(2002)e1 Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D3429-93(2007) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D3429-93(2012) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D6822-02 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D6822-12a Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D6822-12 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D6822-12b(2017) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D1217-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D5835-20 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM C29/C29M-09 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
ASTM D5959-12 Standard Test Method for Bulk Density of Level Paintbrush Filaments
ASTM D1875-03(2018) Standard Test Method for Density of Adhesives in Fluid Form
ASTM D4531-86(2002) Standard Test Methods for Bulk Density of Peat and Peat Products
ASTM D1875-95 Standard Test Method for Density of Adhesives in Fluid Form
ASTM D6683-14 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress

Professional Standard - Pharmaceutical Packaging, Solid sample density

YBB 0012(02)-2002 Oral solid medicinal high-density polyethylene bottle (trial)
YBB 0023(02)-2002 Polyvinyl chloride/low density polyethylene solid pharmaceutical composite tablet (trial)
YBB 0017-2004 LDPE Bottle Caps with Drying agent for Oral Solid Preparation
YBB 0023-2005 PVC/LDPE Composite sheet for Solid Pharmaceutical Packaging
YBB 0009(02)-2002 High-density polyethylene bottle for oral liquid medicine (trial)
YBB 0039(03)-2003 High-density polyethylene bottle for external liquid medicine (trial)

Association Francaise de Normalisation, Solid sample density

NF X34-105:2010 Solid biofuels - Determination of bulk density.
NF M03-022:1959 SOLID FUELS. DETERMINATION OF THE BULK DENSITY OF COKE.
NF X34-105*NF EN ISO 17828:2016 Solid biofuels - Determination of bulk density
NF X34-112:2011 Solid biofuels - Determination of particle density.
NF M03-039:1982 SOLID FUELS. COKE. DETERMINATION OF TRUE RELATIVE DENSITY,APPARENT RELATIVE DENSITY AND POROSITY.
NF EN ISO 17828:2016 Biocombustibles solides - Détermination de la masse volumique apparente
NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
NF P98-818-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6 : determination of bulk density of bituminous specimens.
NF X34-227*NF EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
NF T20-053:1985 Produits chimiques à usage industriel - Détermination de la masse volumique des solides en poudre et des liquides - Méthode pycnométrique
NF T60-101*NF EN ISO 3675:1998 Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method.
NF X34-112*NF EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
NF EN ISO 18847:2016 Biocombustibles solides - Détermination de la masse volumique unitaire des granulés et des briquettes
NF EN ISO 17892-3:2015 Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 3 : détermination de la masse volumique des particules solides
NF EN 14831:2005 Éléments de fixation - Aptitude au serrage - Méthode d'essai simplifiée Couple/Angle
NF T60-180*NF EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
NF P98-818-7*NF EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7 : determination of the bulk density of bituminous specimens by gamma rays
NF ISO 10396:2007 Émissions de sources fixes - Échantillonnage pour la détermination automatisée des concentrations d'émission de gaz pour des systèmes fixes de surveillance
NF EN 3026:1994 Série aérospatiale - Méthode d'essai pour films lubrifiants solides - Essai de corrosion sur éprouvettes en acier
NF T54-048:1977 Plastics. Low density polyethylene pipes. Preparation of specimens for physical testing.
NF T60-180:1996 Crude petroleum and liquid or solid petroleum products. Determination of density or relative density. Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods.
NF T20-520:1973 Sodium and potassium silicates for industrial use. Determination of density of samples in solution. Method using density hydrometer. Method using pyknometer.
NF EN ISO 3838:2004 Pétrole brut et produits pétroliers liquides ou solides - Détermination de la masse volumique ou de la densité - Méthodes du pycnomètre à bouchon capillaire et du pycnomètre bicapillaire gradué

CZ-CSN, Solid sample density

CSN 44 1322 ZZ1-2001
CSN 44 1621 ZZ1-2001
CSN 44 1322-1993 Solid minerál fuels. Determination of true relatíve density
CSN 72 1011-1980 Laboratory determination of apparent density of solid particles of soils
CSN 72 5010-1988 Determination of water absorptivity, apparent and true porosity, bulk density and apparent density solid density of fired ceramic materials and products
CSN 44 1304-1989 Solid fuels. Methods of sampling and preparation of samples for laboratory testing
CSN 44 1325-1953
CSN 44 1308-1996 Solid minerál fuels. Sampling from stockpiles for size analysis
CSN 66 8102 Cast.3-1978 Smokeless powders. Methods of testing. Determination of bulk density

RU-GOST R, Solid sample density

GOST 2160-2015 Solid mineral fuel. Determination of true and apparent density
GOST R 54191-2010 Solid biofuels. Determination of bulk density
GOST 33453-2015 Testing of chemicals of environmental hazard. Determination of the density of liquids and solids
GOST 2160-1992 Solid mineral fuel. Methods for the determination of density
GOST 32987-2014 Solid biofuels. Determination of bulk density
GOST R 54225-2010 Solid recovered fuels. Determination of bulk density
GOST R 54225-2010(2019) Solid recovered fuels. Determination of bulk density
GOST 33507-2015 Solid biofuel. Determination of particle density
GOST R 55124-2012 Solid biofuels. Determination of particle density
GOST 33510-2015 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST 27379-1987 Solid mineral fuel. Methods for determination of sampling and sample preparation errors
GOST 32183-2013 Semi-solid bituminous materials. Determination of density by pycnometer
GOST R 54229-2010 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST R 55959-2014 Activated carbon. Standard test method for bulk density
GOST R 50005-1992 Lasers and solid-state laser heads. Measurement methods of peak local energy (power) density
GOST R 52917-2008 Solid mineral fuels. Methods for determination of moisture in the analysis test sample

Professional Standard - Petrochemical Industry, Solid sample density

NB/SH/T 0817-2010 Standard test method for density of semi-solid and solid asphalt Nickel crucible method

British Standards Institution (BSI), Solid sample density

BS EN ISO 17828:2015 Solid biofuels. Determination of bulk density
BS EN 15103:2010 Solid biofuels. Determination of bulk density
BS EN 15103:2009 Solid biofuels - Determination of bulk density
BS DD CEN/TS 15401:2006 Solid recovered fuels - Methods for the determination of bulk density
BS DD CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
BS EN 15150:2011 Solid biofuels. Determination of particle density
BS EN ISO 18847:2016 Solid biofuels. Determination of particle density of pellets and briquettes
DD CEN/TS 15401:2010 Solid recovered fuels. Determination of bulk density
BS EN 12697-6:2020 Tracked Changes. Bituminous mixtures. Test methods. Determination of bulk density of bituminous specimens
BS DD CEN/TS 15103:2005 Solid biofuels — Methods for the determination of bulk density
BS DD CEN/TS 15103:2006 Solid biofuels - Methods for the determination of bulk density
BS 5711-4:1979 Methods of sampling and test for glycerol - Determination of density and relative density
BS DD CEN/TS 15413:2006 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
BS DD CEN/TS 15150:2005 Solid biofuels — Methods for the determination of particle density
BS DD CEN/TS 15150:2006 Solid biofuels. Methods for the determination of particle density
DD CEN/TS 15401:2006 Solid recovered fuels — Methods for the determination of bulk density
BS EN 12697-6:2012 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens
BS EN 12697-6:2003 Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density of bituminous specimens
BS DD CEN/TS 15405:2010 Solid recovered fuels. Determination of density of pellets and briquettes
DD CEN/TS 15413:2006 Solid recovered fuels — Methods for the preparation of the test sample from the laboratory sample
BS EN 15413:2011 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
BS DD CEN/TS 15405:2006 Solid recovered fuels. Methods for the determination of density of pellets and briquettes
DD CEN/TS 15405:2006 Solid recovered fuels — Methods for the determination of density of pellets and briquettes
BS ISO 24068-2:2021 Building and civil engineering sealants. Determination of the degree of cure. Build-up of tensile and adhesion properties in test joint specimens
BS 6043-3.3:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method
BS 3323:1992 Glossary of terms relating to sampling, testing and analysis of solid mineral fuels
BS 734C:1962 Measurement of the density of milk using a hydrometer - Percentage of total solids and non-fatty solids in milk corresponding to given fat content and observed density fat content range 2-6 per cent (with fat in the liquid state)
BS EN 772-4:1998 Methods of test for masonry units - Determination of real and bulk density and of total and open porosity for natural stone masonry units
BS EN 14789:2005 Stationary source emissions - Determination of volume concentration of oxygen (O) - Reference method - Paramagnetism
BS ISO 1213-2:2016 Solid mineral fuels. Vocabulary. Terms relating to sampling, testing and analysis
BS 1881-130:1996 Testing concrete - Method for temperature-matched curing of concrete specimens
BS 1881-130:2013 Testing concrete.Part 130:Method for temperature-matched curing of concrete specimens
BS EN 12390-2:2019 Tracked Changes. Testing hardened concrete. Making and curing specimens for strength tests
BS 6043-3.4:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method
23/30464630 DC BS EN ISO 18847. Solid biofuels. Determination of particle density of pellets and briquettes
BS ISO 687:2010 Solid mineral fuels. Coke. Determination of moisture in the general analysis test sample

European Committee for Standardization (CEN), Solid sample density

EN 15103:2009 Solid biofuels - Determination of bulk density
PD CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
EN 15150:2011 Solid biofuels - Determination of particle density
CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
EN ISO 17828:2015 Solid biofuels - Determination of bulk density (ISO 17828:2015)
PD CEN/TS 15405:2010 Solid recovered fuels - Determination of density of pellets and briquettes
CEN/TS 15405:2010 Solid recovered fuels - Determination of density of pellets and briquettes
EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
EN 12697-6:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
prEN ISO 18847 rev Solid biofuels — Determination of particle density of pellets and briquettes
EN ISO 8970:2020 Timber structures - Testing of joints made with mechanical fasteners - Requirements for timber density (ISO 8970:2020)
prEN 772-4-1992 Methods of test for masonry units; part 4: determination of real density and bulk density for natural stone masonry units
EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of desity or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)

International Organization for Standardization (ISO), Solid sample density

ISO 17828:2015 Solid biofuels - Determination of bulk density
ISO 7742:1988 Solid fertilizers; reduction of samples
ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
ISO/CD 18708:2023 Solid recovered fuels — Determination of bulk density
ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
ISO 2031:1972 Granulated cork — Bulk density test
ISO 10396:1993 Stationary source emissions; sampling for the automated determination of gas concentrations
ISO 8358:1991 Solid fertilizers; preparation of samples for chemical and physical analysis
ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
ISO 3838:1983 Crude petroleum and liquid or solid petroleum products; Determination of density or relative density; Capillary-stoppered pyknometer and graduated bicapillary pycnometer methods
ISO 24068-1:2021 Building and civil engineering sealants — Determination of the degree of cure — Part 1: Build-up of tensile properties in dumbbell-shaped specimens
ISO 24068-2:2021 Building and civil engineering sealants — Determination of the degree of cure — Part 2: Build-up of tensile and adhesion properties in test joint specimens
ISO/DIS 7763:1964 Testing of paper and board — Compressive strength of an in s-shape fixed sample
ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
ISO 8970:2010 Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density
ISO 3838:2004/DAmd 1 Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods — Amendment 1
ISO 3838:2004/PRF Amd 1:2023 Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods — Amendment 1
ISO 8970:2020 Timber structures — Testing of joints made with mechanical fasteners — Requirements for timber density
ISO 687:2004 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample
ISO 687:2010 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample

Danish Standards Foundation, Solid sample density

DS/CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
DS/EN 15103:2010 Solid biofuels - Determination of bulk density
DS/EN 15150:2012 Solid biofuels - Determination of particle density
DS/CEN/TS 15405:2010 Solid recovered fuels - Determination of density of pellets and briquettes
DS/EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
DS 423.21:1984 Testing of concrete, Making and curing of moulded test specimens for strength tests

Lithuanian Standards Office , Solid sample density

LST EN 15103-2010 Solid biofuels - Determination of bulk density
LST EN 15150-2012 Solid biofuels - Determination of particle density
LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles
LST CEN/TS 15405-2010 Solid recovered fuels - Determination of density of pellets and briquettes
LST EN 15413-2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
LST 1361.7-1995 Mineral aggregates for road construction. Testing methods. Determination of absolute density, dry bulk density, compactness and porosity

Korean Agency for Technology and Standards (KATS), Solid sample density

KS M ISO 17828:2021 Solid biofuels — Determination of bulk density
KS M ISO 7742:2007 Solid fertilizers-Reduction of samples
KS M ISO 7742:2013 Solid fertilizers－Reduction of samples
KS F 2505-2017(2022) Methods of test for bulk density of aggregates and solid content in aggregates
KS M ISO 18847:2022 Solid biofuels — Determination of particle density of pellets and briquettes
KS M ISO 787-11-2007(2017) General methods of test for pigments and extenders－Part 11：Determination of tamped volume and apparent density after tamping
KS M ISO 8358:2007 Solid fertilizers-Preparation of samples for chemical and physical analysis
KS M ISO 8358:2013 Solid fertilizers－Preparation of samples for chemical and physical analysis
KS M ISO 3838:2011 Crude petroleum and liquid or solid petroleum products－Determination of density or relative density－Capillary-stopped pyknometer and graduated bicapillary pyknometer methods
KS M ISO 3838-2011(2021) Crude petroleum and liquid or solid petroleum products —Determination of density or relative density — Capillary stopped pyknometer and graduated bicapillary pyknometer methods
KS L 1621-2008(2018) Fine ceramics－Test methods for bulk density of fine ceramic powder
KS I ISO 10396:2009 Stationary source emissions-Sampling for the automated determination of gas emission concentrations forpermanently-installed monitoring systems
KS E ISO 8530-2003(2019)
KS M ISO 3838-2011(2016) Crude petroleum and liquid or solid petroleum products —Determination of density or relative density — Capillary stopped pyknometer and graduated bicapillary pyknometer methods

KR-KS, Solid sample density

KS M ISO 17828-2021 Solid biofuels — Determination of bulk density
KS M ISO 18847-2022 Solid biofuels — Determination of particle density of pellets and briquettes

Taiwan Provincial Standard of the People's Republic of China, Solid sample density

CNS 14818-2004 Method of test for density of smoke generated by solid materials -Specificoptical method of vertical type
CNS 11027-1984 Definitions of Terms Relating to Density and Specific Gravity of Solids Liquids and Gases
CNS 5753-1980 Method of Test for Bulk Density of Germaniun Dioxide
CNS 14387-1999 Method of test for bending strength of fine ceramic joint
CNS 614-1978 Method of Test for Size and Bulk Density of Refractory Brick and Insulating Firebrick

NO-SN, Solid sample density

NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles

PL-PKN, Solid sample density

PN C89286-04-1989 Polyethylene Iow densffy Sampling and sample preparation for testing
PN G04601-1992 Dense medium solids Magnet?te Specifications and tests
PN C04504-1992 Chemical analysis. Determination of density of liquid chemical products and solids in powder
PN A79120-03-1990 Wines and meads Preparation of samples and testing methods Determination of density

Standard Association of Australia （SAA）, Solid sample density

AS 4459.3:1999 Methods of sampling and testing ceramic tiles - Determination of water absorption, apparent porosity, apparent relative density and bulk density
AS/NZS 2891.14.2:2013
AS 1038.21.1.1:2002 Coal and coke - Analysis and testing - Higher rank coal and coke - Relative density - Analysis sample/density bottle method
AS/NZS 2891.14.3:2013
AS/NZS 2891.14.5:2014
AS/NZS 2891.14.1.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Backscatter mode
AS/NZS 2891.14.1.1:1996 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Direct transmission mode
AS/NZS 2891.14.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear thin-layer density gauge
AS 1038.21.1.2:2002(R2013)
AS 1038.21.1.1:2008
AS 1141.4:2000 Methods for sampling and testing aggregates - Bulk density of aggregate
AS 1141.4:2000(R2013)
AS/NZS 2891.14.4:2013
AS/NZS 2891.14.1.1:2013
AS/NZS 2891.14.1.2:2013
AS/NZS 2891.14.4:1999 Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear surface moisture-density gauge - Backscatter mode
AS/NZS 2891.14.3:1999 Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear thin-layer density gauge using standard blocks
AS 1038.21.1.1:1994 Coal and coke - Analysis and testing Part 21.1.1:Higher rank coal and coke - Relative density - Analysis sample /density bottle method
AS/NZS 2891.14.5:1999 Methods of sampling and testing asphalt - Field density tests - Density ratio of compacted asphalt
AS/NZS 1141.7:2014
AS 1141.7:1995 Methods for sampling and testing aggregates - Apparent particle density of filler
AS/NZS 2891.7.1:2015

YU-JUS, Solid sample density

JUS H.B8.801-1991 Solid fertilizers.Determination of bulk densitv(loose)
JUS H.B8.802-1991 Solid fertilizers.Determination of bulk densitv(tapped)
JUS H.B8.803-1991 Solid fertilizers.Determination of bulk densitv(loose) of fine-qrained fertilizers

Japanese Industrial Standards Committee (JISC), Solid sample density

JIS Z 8807:2012 Methods of measuring density and specific gravity of solid
JIS A 1104 ERRATUM 1:2000 Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)
JIS A 1225:2000 Test method for bulk density of soils
JIS A 1225:2009 Test method for bulk density of soils
JIS A 1104:1999 Methods of test for bulk density of aggregates and solid content in aggregates
JIS A 1104:2006 Methods of test for bulk density of aggregates and solid content in aggregates
JIS A 1104:2019 Methods of test for bulk density of aggregates and solid content in aggregates
JIS R 1628:1997 Test methods for bulk density of fine ceramic powder
JIS Z 7302-9:2002 Densified refuse derived fuel -- Part 9: Test method for apparent bulk density

FI-SFS, Solid sample density

Professional Standard - Agriculture, Solid sample density

NY/T 1881.7-2010 Densified biofuel-Test methods Part 7:Particle density
127药典四部-2020 0900 Property Inspection Method 0992 Solid Density Determination Method
NY/T 1881.6-2010 Densified biofuel-Test methods Part 6:Bulk density

American National Standards Institute （ANSI), Solid sample density

ANSI/ASTM E662a:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/ASTM E662b:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/ASTM E662c:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/ASTM E662 REV A:2021 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

CL-INN, Solid sample density

INDITECNOR 20-13ch-1960

Canadian General Standards Board （CGSB), Solid sample density

CGSB 40-GP-1M METH 4-1978 Methods of Sampling and Testing Cordage Linear Density

Professional Standard - Aerospace, Solid sample density

QJ 1113-1987 Composite solid propellant performance test sample
QJ 1616-1989 Method for Determination of Crosslinking Density of Composite Solid Propellant
QJ 1658A-1996 Test method for airtightness of solid rocket motors
QJ 2902-1997 Solid rocket motor temperature test method
QJ 917-1985 固体发动机
QJ 917A-1997 Method for determination of density of composite solid propellants and linings and insulation materials

Professional Standard - Machinery, Solid sample density

JB/T 7999-2013 Bonded abrasive products.Testing methods for the volume density, general porosity and water absorption
JB/T 9588.3-1999 Test method for ceramic insulators of spark plug.Test method for volume density

U.S. Military Regulations and Norms, Solid sample density

ARMY MIL-STD-286 C CHG NOTICE 2-2010 PROPELLANTS, SOLID: SAMPLING, EXAMINATION AND TESTING
ARMY MIL-STD-286 C CHG NOTICE 1-1994 PROPELLANTS, SOLID: SAMPLING, EXAMINATION AND TESTING

PT-IPQ, Solid sample density

NP 3757-1989 SOLID FUELS Cokes Determination of true relative density, apparent relative density and porosity

HU-MSZT, Solid sample density

MSZ KGST 752-1977

SE-SIS, Solid sample density

SIS SS 13 11 12-1983 Concrete testing - Test specimens - Making and curing of moulded test specimens for strength tests
SIS SS-ISO 3838:1987 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary- stoppered pyknometer and graduated bicapillary pyknometer methods

AASHTO - American Association of State Highway and Transportation Officials, Solid sample density

T229-1985 Standard Method of Test for Density of Solid Pitch and Asphalt (Displacement Method) (R 1993)

Professional Standard - Automobile, Solid sample density

QC/T 29105.3-1992 Sampling of test method for solid pollution degree of hydraulic oil in special automobile hydraulic system
QC/T 29105.3-2013 Sampling methods of testing particulate contamination of hydraulic oil of special purpose vehicle hydraulic system
QC/T 434-1999 Test methods for spark plug porcelain insulators - Test methods for bulk density

CEN - European Committee for Standardization, Solid sample density

PD CEN/TS 15103:2005 Solid biofuels - Methods for the determination of bulk density
PD CEN/TS 15150:2005 Solid biofuels - Methods for the determination of particle density
PD CEN/TS 15401:2006 Solid recovered fuels - Methods for the determination of bulk density
EN 12697-6:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens (Incorporates Amendment A1: 2007)
PD CEN/TS 15413:2006 Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample
PD CEN/TS 15405:2006 Solid recovered fuels - Methods for the determination of density of pellets and briquettes

Indonesia Standards, Solid sample density

SNI 19-4956-1998 Test method for relative density, specific gravity and density (of homogeneous liquid)
SNI 06-0427-1989 Plastic materials, Determination of bulk density
SNI 19-1129-1989 Test method for gas concentration in welding environment

AENOR, Solid sample density

UNE 56919:1990 GRANULATED CORK. BULK DENSITY TEST.
UNE-EN 15413:2012 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
UNE-EN ISO 18847:2017 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016)

国家机械工业局, Solid sample density

JB/T 8264.1-1999 Test method for bulk density of carrier

American Society of Mechanical Engineers (ASME), Solid sample density

ASME PTC 19.16-1965 Instruments and apparatus - Part 16: Density Determinations solids and liquids

Professional Standard - Geology, Solid sample density

DZ/T 0372-2021 Specification for sample preparation of solid mineral dressing and smelting test

IN-BIS, Solid sample density

IS 3513 Pt.4-1966
IS 101 Pt.8/Sec.6-1993 Methods of sampling and test for paints, varnishes and related products. Part 8: Tests for pigments and other solids. Section 6: Volume solids

Universal Oil Products Company (UOP), Solid sample density

UOP 851-2008 Density of Powders and Solids by Helium Displacement

ES-UNE, Solid sample density

UNE-EN ISO 17828:2016 Solid biofuels - Determination of bulk density (ISO 17828:2015)
ISO/DIS 18847:2023 Solid biofuels — Determination of particle density of pellets and briquettes

AT-ON, Solid sample density

ONORM S 7021-1983 Testing of leather; determination of bulk density Essai de cuir; determination de la masse volumique apparente

Professional Standard - Medicine, Solid sample density

YY/T 1253-2015 Low density lipoprotein (LDL) cholesterol assay kit
YY/T 1254-2015 High density lipoprotein (HDL) cholesterol assay kit

GM North America, Solid sample density

GM GM9010P-1988 Test for Solid Content of Adhesives and Sealers

BE-NBN, Solid sample density

NBN T 02-101-1979 Liquid Chemical products for industrial use -Determination of density at 20 CC
NBN M 02-002-1975 Solid minerai fuels - Determination of the bulk density of coke in a large container
NBN M 02-001-1975 Solid minerai fuels - Determination of the bulk density of coke in a small container
NBN T 63-109-1982 Surface active agents - Washing powders - Determination of apparent density-Method by measuring the mass of a given volume

Hebei Provincial Standard of the People's Republic of China, Solid sample density

DB13/T 5384-2021 Test procedure for soil bulk density by complex impedance method

Group Standards of the People's Republic of China, Solid sample density

T/CRES 0009-2022 Testing method of thermochemical energy storage temperature and energy density for solid compounds
T/CNPPA 2001-2017 HDPE Non-woven Fabrics Desiccant Sachet for Oral Solid Preparation
T/CNPPA 2002-2017 HDPE Non-woven Fabrics Active Carbon Sachet for Oral Solid Preparation

Professional Standard - Light Industry, Solid sample density

QB/T 1642-2012 Test method for apparent porosity and bulk density of ceramic body
QB/T 1642-1992 Test method for apparent porosity and bulk density of ceramic body

Professional Standard - Ferrous Metallurgy, Solid sample density

YB/T 5202-1993 Consistency determination and sample preparation method of dense refractory castable
YB/T 5200-1993 Dense refractory castables ---Determination of bulk density and apparent porosity

IT-UNI, Solid sample density

UNI 7315-1979

NZ-SNZ, Solid sample density

NZS 4402.5.1.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Sensity of Soil Test 5.1.3: Sampling Tube Method for the Determination of the In Situ Density

Professional Standard - Forestry, Solid sample density

LY/T 3144-2019/ISO 8970:2010 Density requirements for test specimens for connection tests of wood-metal fasteners for structural use

国家林业和草原局, Solid sample density

LY/T 3144-2019 Density requirements for wood-to-metal fastener connection test materials for structural use

The American Road & Transportation Builders Association, Solid sample density

AASHTO T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens

Military Standard of the People's Republic of China-General Armament Department, Solid sample density

GJB 5021-2001 Solid rocket motor temperature test method

Professional Standard - Chemical Industry, Solid sample density

HG/T 2900-1997 Testing method for bulk density of polytetrafluoroethylene resin

Aerospace Industries Association/ANSI Aerospace Standards, Solid sample density

AIA/NAS NASM20426-2001 Rivet, Solid, Countersunk 100 Degree, Precision Head, Aluminum and Titanium Columbium Alloy Rev. 1; FSC 5320

VN-TCVN, Solid sample density

TCVN 7117-2007 Leather.Chemical, physical and mechanical and fastness tests.Sampling location
TCVN 4919-2007 Solid mineral fuels.Coke.Determination of moisture in the general analysis test sample
TCVN 6355-5-2009 Bricks.Test methods.Part 5: Determination of bulk density.

National Metrological Verification Regulations of the People's Republic of China, Solid sample density

JJG 370-1984 Verification Regulation of Working Vibration Tube Liquid Density Meter

国家市场监督管理总局、中国国家标准化管理委员会, Solid sample density

GB/T 1927.5-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 5: Determination of density