ZH

RU

ES

Mass Spectrometry and Molecular Weight

Mass Spectrometry and Molecular Weight, Total:149 items.

In the international standard classification, Mass Spectrometry and Molecular Weight involves: Raw materials for rubber and plastics, Plastics, Analytical chemistry, Non-ferrous metals, Powder metallurgy, Testing of metals, Water quality, Farming and forestry, Food products in general, Products of non-ferrous metals, Soil quality. Pedology, Surface treatment and coating, Ferrous metals, Laboratory medicine, Metalliferous minerals, Radiation measurements, Nuclear energy engineering, Semiconductor devices, Organic chemicals.


British Standards Institution (BSI), Mass Spectrometry and Molecular Weight

  • BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
  • BS ISO 16014-2:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Universal calibration method
  • BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
  • BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
  • BS ISO 13084:2011 Surface chemical analysis. Secondary-ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
  • BS ISO 13084:2018 Tracked Changes. Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • BS ISO 20411:2018 Surface chemical analysis. Secondary ion mass spectrometry. Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
  • BS EN ISO 10927:2011 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • BS EN ISO 10927:2018 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • BS EN 12938:2000 Methods for the analysis of pewter. Determination of alloying and impurity element contents by atomic spectrometry
  • BS EN 12938:2000(2001) Methods for the analysis of pewter. Determination of alloying and impurity element contents by atomic spectrometry
  • BS EN ISO 12020:2000 Water quality - Determination of aluminium - Atomic absorption spectrometric methods
  • BS ISO 17862:2013 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • BS EN 15916-2:2010 Copper and copper alloys. Determination of tellurium content. Part 2: Medium tellurium content.Flame atomic absorption spectrometric method (FAAS)
  • PD ISO/TS 16965:2013 Soil quality. Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS)
  • BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • BS EN ISO 15192:2021 Soil and waste. Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
  • BS EN ISO 22892:2011 Soil quality. Guidelines for the identification of target compounds by gas chromatography and mass spectrometry
  • BS ISO 23646:2022 Soil quality. Determination of organochlorine pesticides by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)

International Organization for Standardization (ISO), Mass Spectrometry and Molecular Weight

  • ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
  • ISO 16014-4:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
  • ISO 16014-4:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
  • ISO 16014-2:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
  • ISO 16014-2:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
  • ISO 16564:2004/Amd 1:2006 Rubber, raw natural — Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) — Amendment 1
  • ISO/TS 22933:2022 Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS
  • ISO 13084:2011 Surface chemical analysis - Secondary-ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
  • ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
  • ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
  • ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • ISO 16014-1:2003 Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
  • ISO 13084:2018 Surface chemical analysis — Secondary ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • ISO 17925:2004 Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
  • ISO 15192:2010 Soil quality - Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
  • ISO 15192:2021 Soil and waste - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
  • ISO 22892:2006 Soil quality - Guidelines for the identification of target compounds by gas chromatography and mass spectrometry
  • ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers

Korean Agency for Technology and Standards (KATS), Mass Spectrometry and Molecular Weight

  • KS M ISO 16564:2007 Rubber, raw natural-Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography(SEC)
  • KS M ISO 16564-2007(2022) Rubber, raw natural-Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography(SEC)
  • KS M ISO 16564-2007(2017) Rubber, raw natural-Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography(SEC)
  • KS D ISO 7627-4-2012(2022) Hardmetals-Chemical analysis by flame atomic absorption spectrometry-Part 4:Determination of molybdenum, titanium and vanadium in contents from 0.01 to 0.5 % (mass fraction)
  • KS D ISO 7627-3-2012(2022) Hardmetals-Chemical analysis by flame atomic absorption spectrometry-Part 3:Determination of cobalt, iron, manganese and nickel in contents from 0.01 to 0.5 % (mass fraction)
  • KS D ISO 7627-2-2012(2022) Hardmetals-Chemical analysis by flame atomic absorption spectrometry-Part 2:Determination of calcium, potassium, magnesium and sodium in contents from 0.001 % to 0.02 % (mass fraction)
  • KS D ISO 7627-6-2012(2022) Hardmetals-Chemical analysis by flame atomic absorption spectrometry-Part 6:Determination of chromium in contents from 0.01 to 2 % (mass fraction)
  • KS D ISO 7627-6-2012(2017) Hardmetals-Chemical analysis by flame atomic absorption spectrometry-Part 6:Determination of chromium in contents from 0.01 to 2 % (mass fraction)
  • KS D ISO 17925-2006(2016) Zinc and/or aluminium based coatings on steel-Determination of coating mass per unit area and chemical composition-Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic
  • KS D ISO 17925:2006 Zinc and/or aluminium based coatings on steel-Determination of coating mass per unit area and chemical composition-Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
  • KS D ISO 17925:2021 Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atom
  • KS M ISO 11344-2017(2022) Rubber, raw synthetic-Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
  • KS D ISO 7627-5-2012(2022) Hardmetals-Chemical analysis by flame atomic absorption spectrometry-Part 5:Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0.5 to 2 % (mass fracti
  • KS I ISO 22892:2007 Soil quality-Guidelines for the identification of target compounds by gas chromatography and mass spectrometry
  • KS D ISO 7627-4-2012(2017) Hardmetals-Chemical analysis by flame atomic absorption spectrometry-Part 4:Determination of molybdenum, titanium and vanadium in contents from 0.01 to 0.5 % (mass fraction)

未注明发布机构, Mass Spectrometry and Molecular Weight

  • BS ISO 16564:2004(2006) Rubber, raw natural — Determination of averagemolecularmass and molecular - mass distribution by size exclusion chromatography (SEC)

国家市场监督管理总局、中国国家标准化管理委员会, Mass Spectrometry and Molecular Weight

  • GB/T 40129-2021 Surface chemical analysis—Secondary ion mass spectrometry—Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • GB/T 40374-2021 Hardmetals—Determination of lead and cadmium content—Flame atomic absorption spectrometric method and inductively coupled plasma atomic emission spectrometry
  • GB/T 7739.14-2019 Methods for chemical analysis of gold concentrates—Part 14: Determination of thallium content—Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry

TH-TISI, Mass Spectrometry and Molecular Weight

  • TIS 2250.3-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 3: low.temperature method
  • TIS 2250.4-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 4: high.temperature method
  • TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles
  • TIS 2250.2-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 2: universal calibration method

Japanese Industrial Standards Committee (JISC), Mass Spectrometry and Molecular Weight

  • JIS K 7252-3:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
  • JIS K 7252-4:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
  • JIS K 7252-3:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
  • JIS K 7252-4:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
  • JIS K 0157:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • JIS K 7252-2:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
  • JIS K 7252-2:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
  • JIS K 0158:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
  • JIS K 0400-55-20:1998 Water quality -- Determination of cadmium by atomic absorption spectrometry
  • JIS K 0400-48-20:1998 Water quality -- Determination of sodium and potassium -- Part 1: Determination of sodium by atomic absorption spectrometry
  • JIS K 0167:2011 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • JIS K 0400-49-20:1998 Water quality -- Determination of sodium and potassium -- Part 2: Determination of potassium by atomic absorption spectrometry

RU-GOST R, Mass Spectrometry and Molecular Weight

  • GOST R 57061-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma mass spectrometry method
  • GOST R 57060-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method
  • GOST R ISO 17925-2012 Zinc and/or aluminium based coatings on steel. Determination of chemical composition and coating mass per unit area. Gravimetry, atomic emission spectrometry with inductively coupled plasma and flame atomic absorption spectrometry methods

Association Francaise de Normalisation, Mass Spectrometry and Molecular Weight

  • NF EN 26777:1993 Qualité de l'eau - Dosage des nitrites - Méthode par spectrométrie d'absorption moléculaire
  • NF T51-241:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • NF X43-275:2002 Qualité de l'air - Air des lieux de travail - Dosage d'éléments présents dans l'air des lieux de travail par spectrométrie atomique
  • NF T30-711:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
  • NF EN 1233:1996 Qualité de l'eau - Dosage du chrome - Méthodes par spectrométrie d'absorption atomique
  • NF EN ISO 17852:2008 Qualité de l'eau - Dosage du mercure - Méthode par spectrométrie de fluorescence atomique
  • NF EN ISO 10927:2018 Plastiques - Détermination de la masse moléculaire et de la distribution des masses moléculaires des polymères par spectrométrie de masse, à temps de vol, après désorption/ionisation laser assistée par matrice (SM-MALDI-TOF)
  • NF EN ISO 12020:2000 Qualité de l'eau - Dosage de l'aluminium - Méthodes par spectrométrie d'absorption atomique
  • NF EN ISO 7980:2000 Qualité de l'eau - Dosage du calcium et du magnésium - Méthode par spectrométrie d'absorption atomique
  • NF T51-241:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
  • NF EN 13615:2002 Méthodes pour l'analyse des lingots d'étain - Détermination des teneurs en impuretés dans l'étain de qualité 99,90 % et 99,85 % par spectrométrie atomique
  • NF EN ISO 22892:2011 Qualité du sol - Lignes directrices pour l'identification de composés cibles par chromatographie en phase gazeuse et spectrométrie de masse
  • NF EN ISO 12846:2012 Qualité de l'eau - Dosage de mercure - Méthode par spectrométrie d'absorption atomique (SAA) avec et sans enrichissement
  • NF T90-113-1:2007 Water quality - Determination of mercury - Method using atomic absorption spectrometry.
  • NF T90-007:2001 Water quality - Determination of soluble silicates - Molecular absorption spectrometric method.
  • NF ISO 23830:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Répétabilité et constance de l'échelle des intensités relatives en spectrométrie statique de masse des ions secondaires
  • NF X31-171:2011 Soil quality - Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection.
  • NF X31-439*NF EN ISO 22892:2011 Soil quality - Guidelines for the identification of target compounds by gas chromatography and mass spectrometry.

European Committee for Standardization (CEN), Mass Spectrometry and Molecular Weight

  • EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
  • EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
  • EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
  • EN 1233:1996 Water Quality - Determination of Chromium - Atomic Absorption Spectrometric Methods
  • EN ISO 15192:2021 Soil and waste - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection (ISO 15192:2021)

German Institute for Standardization, Mass Spectrometry and Molecular Weight

  • DIN EN ISO 10927:2018-10 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018); German version EN ISO 10927:2018
  • DIN EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
  • DIN 55674:2006 Synthetic Polymers - Determination of molecular mass and molecular mass distribution of polymers by matrix assisted laser desorption/ionization-time-of-flight-mass spectrometry
  • DIN EN ISO 12020:2000 Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997); German version EN ISO 12020:2000
  • DIN ISO 20279:2006 Soil quality - Extraction of thallium and determination by electrothermal atomic absorption spectrometry (ISO 20279:2005);English version of DIN ISO 20279:2006-01
  • DIN EN 1233:1996 Water quality - Determination of chromium - Atomic absorption spectrometric methods; German version EN 1233:1996
  • DIN EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011); German version EN ISO 10927:2011

Danish Standards Foundation, Mass Spectrometry and Molecular Weight

  • DS/EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • DS/EN 12938/AC:2001 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
  • DS/EN 12938:2001 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry

ES-UNE, Mass Spectrometry and Molecular Weight

  • UNE-EN ISO 10927:2019 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
  • UNE-EN 12938:1999 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
  • UNE-EN 13615:2001 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry

Lithuanian Standards Office , Mass Spectrometry and Molecular Weight

  • LST EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
  • LST EN 12938-2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
  • LST EN 12938-2000/AC-2003 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry

AENOR, Mass Spectrometry and Molecular Weight

  • UNE-EN ISO 10927:2012 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)

工业和信息化部, Mass Spectrometry and Molecular Weight

  • YS/T 1497-2021 Analysis method for platinum compounds Determination of impurity anion content Ion chromatography
  • YS/T 1496-2021 Analysis method for palladium compounds Determination of impurity anion content Ion chromatography
  • YS/T 1050.10-2016 Methods for chemical analysis of lead and antimony concentrates Part 10 Determination of thallium content Inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 445.14-2019 Methods for chemical analysis of silver concentrates Part 14: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 870-2020 Chemical Analysis Methods for Pure Aluminum Determination of Trace Impurity Element Contents Inductively Coupled Plasma Mass Spectrometry

ZA-SANS, Mass Spectrometry and Molecular Weight

  • SANS 6777:1984 Water quality - Determination of nitrite - Molecular absorption spectrometric method

Chongqing Provincial Standard of the People's Republic of China, Mass Spectrometry and Molecular Weight

农业农村部, Mass Spectrometry and Molecular Weight

  • NY/T 1860.35-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 35: Determination of Polymer Molecular Weight and Molecular Weight Distribution (Gel Permeation Chromatography)

Professional Standard - Commodity Inspection, Mass Spectrometry and Molecular Weight

  • SN/T 3002-2011 Determication of relative molecular weight and molecular weight distribution of polyethylene.Gel permeation chromatography method
  • SN/T 4183-2015 Determination of relative molecular weight and molecular weight distribution of polyolefins.High temperature gel permeation chromatography method

Professional Standard - Geology, Mass Spectrometry and Molecular Weight

  • DZ/T 0064.28-2021 Methods of analysis of groundwater quality - Part 28: Determination of potassium, sodium, lithium and ammonium by ion chromatography

Anhui Provincial Standard of the People's Republic of China, Mass Spectrometry and Molecular Weight

  • DB34/T 2432-2015 Determination of Photoinitiator Migration in Polymer Base Films, Bags by Liquid Chromatography-Tandem Mass Spectrometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Mass Spectrometry and Molecular Weight

  • GB/T 20899.14-2017 Methods for chemical analysis of gold ores-Part 14: Determination of thallium content - Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry
  • GB/T 8152.13-2017 Methods for chemical analysis of lead concentrates—Part 13:Determination of thallium content—Inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry
  • GB/T 8151.21-2017 Methods for chemical analysis of zinc concentrates—Part 21:Determination of thallium content—Inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry

KR-KS, Mass Spectrometry and Molecular Weight

  • KS D ISO 17925-2021 Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atom

Standard Association of Australia (SAA), Mass Spectrometry and Molecular Weight

  • AS 4699:2000 Zinc and zinc alloys - Determination of impurities and alloying elements - Atomic emission spectrometric method

RO-ASRO, Mass Spectrometry and Molecular Weight

  • STAS SR 13315-1996 Water quality - Iron determination - Spectrometric method of atomic absorption

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Mass Spectrometry and Molecular Weight

  • GB/T 15249.5-1994 Crude Gold-Determination of mercury content-Cold atomic absorption spectrometric method
  • GB/T 24514-2009 Zinc and/or aluminium based coatings on steel.Determination of coating mass per unit area and chemical composition.Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
  • GB/T 7717.16-2022 Acrylonitrile for industrial use—Part 16: Determination of iron and copper content—Graphite furnace atomic absorption spectrometry and inductively coupled plasma mass spectrometry

American Society for Testing and Materials (ASTM), Mass Spectrometry and Molecular Weight

  • ASTM E1504-11 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
  • ASTM E261-98 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques

国家药监局, Mass Spectrometry and Molecular Weight

Group Standards of the People's Republic of China, Mass Spectrometry and Molecular Weight

  • T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry

PL-PKN, Mass Spectrometry and Molecular Weight

  • PN C80000-1992 Reagents and pure substances. Determination of small quantities of elements by atomic absorption spectrometry

YU-JUS, Mass Spectrometry and Molecular Weight

  • JUS C.A1.546-1990 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determi- natlon of chromium In ctmtents from 0,01 to 2 % (m/m)

HU-MSZT, Mass Spectrometry and Molecular Weight

Yunnan Provincial Standard of the People's Republic of China, Mass Spectrometry and Molecular Weight

  • DB53/T 902-2019 Quality classification of Polygonatum yunnanensis seeds and seedlings




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved