ZH
RU
ES

Thermogravimetric and thermogravimetric

Thermogravimetric and thermogravimetric, Total:488 items.

In the international standard classification, Thermogravimetric and thermogravimetric involves: Test conditions and procedures in general, Conducting materials, Raw materials for rubber and plastics, Seals, glands, Lubricants, industrial oils and related products, Education, Thermodynamics and temperature measurements, Analytical chemistry, Construction materials, Organic chemicals, Water quality, Iron and steel products, Spices and condiments. Food additives, Vocabularies, Protection against fire, Solar energy engineering, Burners. Boilers, Pipeline components and pipelines, Chipless working equipment, Products of non-ferrous metals, Rubber, Lamps and related equipment, Plastics, Beverages, Products of the chemical industry, Aids for disabled or handicapped persons, Heat treatment, Insulating fluids, Fluid storage devices, Ergonomics, Equipment for the metallurgical industry, Surface treatment and coating, Materials for aerospace construction, Pulps, Cellular materials, Nuclear energy engineering, Insulating materials, Farming and forestry, Fuels, Refractories, Environmental testing, Non-ferrous metals, Welding, brazing and soldering, Non-metalliferous minerals, Paints and varnishes, Rails and railway components, Reinforced plastics, Equipment for the chemical industry, Products of the textile industry, Mechanical testing, Coals, Adhesives, Industrial furnaces, Shafts and couplings, Metalliferous minerals, Metrology and measurement in general, Electrical engineering in general, Cases. Boxes. Crates, Shop fittings, Crude petroleum, Resistors, Lifting equipment, Materials for the reinforcement of composites, Shipbuilding and marine structures in general, Ceramics, Heat recovery. Thermal insulation, Installations in buildings, Tobacco, tobacco products and related equipment, Rubber and plastics products, Electrical wires and cables, Wastes, Soil quality. Pedology, Ventilators. Fans. Air-conditioners, Heat pumps, Road engineering, Protective equipment, Cutting tools, Physics. Chemistry, Wood-based panels.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Thermogravimetric and thermogravimetric

GB/T 27761-2011 Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers
GB/T 13021-1991 Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysis
GB/T 24767-2009 The gravity heat pipe for solar application
GB/T 14812-1993 The testing method of heat transfer performance for gravity heat pipe
GB/T 9082.2-1988 Wickless aluminium gravity heat pipes
GB/T 9082.1-1988 Aluminium tubes used for wickless gravity heat pipes
GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
GB/T 16744-2002 Thermal spraying--Spraying and fusing of self--fluxing alloys
GB/T 31229-2014 Test method for volatility rate by thermogravimetry
GB/T 702-1986 Hot-rolled round and square steels--Dimension,shape,weight and tolerance
GB/T 702-2004 Hot-rolled round and square steel bars-Dimension,Shape,weight and tolerance
GB 702-1986 Hot-rolled round and square steels—Dimension, shape, weight and tolerance
GB/T 28712.4-2023 Heat Exchanger Types and Basic Parameters Part 4: Thermosyphon Reboiler
GB/T 20405.4-2006 Urine-absorbing aids for incontinence. Test methods for characterizing Polymer-based absorbent materials. Part 4: Determination of moisture content by mass loss upon heating
GB/T 33047.1-2016 Plastics.Thermogravimetry(TG) of polymers.Part 1:General principles
GB/T 704-1988 Dimensions, shape, weight and tolerances for hot-rolled flats
GB/T 14981-1994 Dimenisions shape weight and tolerances for hot-rolled wire rods
GB/T 707-1988 Hot-rolled channel steel--Dimensions,shape,weight and tolerances
GB/T 14981-2004 Dimenisions,shape,mass and tolerances for hot-rolled wire rods
GB/T 702-2008 Dimensions, shapes, weights and allowable deviations of hot-rolled steel bars
GB 707-1988 Dimensions, shapes, weights and allowable deviations of hot-rolled channel steel
GB/T 1875-1995 Phosphate rock and concentrate--Determination of loss on ignition--Gravimetric method
GB/T 709-1988 Dimensions, shape, weight and tolerances for hot-rolled plates and sheets
GB/T 709-2006 Dimension, shape, weight and tolerances for hot-rolled steel plates and sheets
GB/T 9946-1988 Dimensions,shape,weight and tolerances for hot-rolled L-sectional steel
GB/T 706-1988 Hot-rolled beam steel--Dimensions,shape,weight and tolerances
GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers
GB/T 14981-2009 Dimension,shape,mass and tolerance for hot-rolled round wire rod
GB/T 28712.4-2012 Types and basic parameters of heat exchangers.Part 4:Vertical thermo siphon reboilers
GB/T 11842-1989 Determination of oxygen to uranium atomic ratic in uranium dioxide powder and pellets by thermogravimetric method
GB/T 705-1989 Hot-rolled hexagonal and octagonal steel bars--Dimensions, shape, weight and tolerance
GB 11842-1989 Determination of Atomic Ratio of Oxygen to Uranium in Uranium Dioxide Powder and Pellets by Thermogravimetry
GB/T 17357-2008 In-situ measurements of heat loss through thermal insulation of equipments and pipes. Heat flow meter apparatus and surface temperature method
GB/T 32868-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using thermogravimetric analysis
GB/T 9787-1988 Hot-rolled equal-leg angle steel--Dimensions,shape,weight and tolerances
GB/T 29189-2012 Thermo gravimetric analysis(TGA) for determination of oxidation temperature and ash content of carbon nanotubes
GB/T 3997.1-1998 Shaped insulating refractory products--Determination of permanent change in dimension on heating
GB/T 3780.30-2023 Carbon black Part 30: Determination of high temperature volatiles by thermogravimetric method
GB/T 9788-1988 Hot-rolled unequal-leg angle steel--Dimensions,shape,weight and tolerances
GB/T 10066.8-2006 Test methods for electroheat installations.Part 8:Electroslag remelting furnaces
GB/T 911-2004 Dimensions,shapes,weight and tolerances for hot-rolled tool flat steels
GB/T 25052-2010 Continuously hot-dip coated steel sheet and strip.Tolerances on dimensions,shape and weight
GB/T 2951.32-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part32:Methods specific to PVC compounds.Loss of mass test.Thermal stability test
GB/T 10067.8-2016 Basic specifications for electroheat installations.Part 8:Electroslag remelting furnaces
GB/T 14837-1993 Rubber and rubber products.Determination of composition by thermogravimetry

工业和信息化部, Thermogravimetric and thermogravimetric

YB/T 6048-2022 Determination method of thermal weight loss of coal pitch
YB/T 4832-2020 Heavy duty hot rolled H-beam
JB/T 14247-2022 Heavy duty hot die forging press
YB/T 4716-2018 Determination of moisture content and oil content of rolling steel scales by thermogravimetric method
JB/T 13499-2018 Heavy-duty drum gear coupling for hot continuous rolling and finishing mill units
YS/T 1410-2021 Technical specifications for recovery and utilization of waste heat from heavy non-ferrous metallurgical furnaces

RO-ASRO, Thermogravimetric and thermogravimetric

STAS 8099-1974 BITUMENS Determination of loss in weight by heating
STAS SR ISO 6964:1995 Poiyoiefin pipes and fittings - Determination of carbon black by calclnatlon and pyrolysis - Test method and basic spec?fication
STAS 12451-1986 HEAVY PLATES OF CORROSION AND HEAT-RESISTANT STEEL. Dimensions
STAS 11870-1980 TRAVELLING CRANES FOR THERMAL TREATMENT Typification
STAS 12451/1-1986 HEAVY PLATES OF CORROSION AND HEAT-RESISTANT STEEI. Technical requirements for quality
STAS 12739-1989 Solar energy CONSUMPTION WARM WATER PREPARATION PLANTS WITH WORKING BY GRAVITY Thermal performance determination

Professional Standard - Aviation, Thermogravimetric and thermogravimetric

HB 5240-1983 Test method for thermal weight loss of vulcanized rubber
HB 5367.4-1986 Determination method for thermal oxidation weight loss of carbon graphite sealing materials
HB 5257-1983 Weight loss determination of corrosion test results and removal of corrosion products
HB 6759-1993 General specification for aircraft misfire and overheat detection systems

Danish Standards Foundation, Thermogravimetric and thermogravimetric

DS 1097.4:1975 Floorings. Determination of dimensional changes and lose in weight on heating
DS/EN 12145:1997 Fruit and vegetable juices - Determination of total dry matter - Gravimetric method with loss of mass on drying
DS/ISO 17190-4:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 4: Test method for estimation of the moisture content as weight loss upon heating
DS/EN 4383:2007 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
DS/EN 4384:2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock
DS/EN ISO 11358:1997 Plastics - Thermogravimetry (TTG) of polymers - General principles
DS/EN 60779:2006 Industrial electroheat equipment - Test methods for electroslag remelting furnaces
DS/EN 15935:2012 Sludge, treated biowaste, soil and waste - Determination of loss on ignition
DS/ISO/TS 11308:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using thermogravimetric analysis

Korean Agency for Technology and Standards (KATS), Thermogravimetric and thermogravimetric

KS M ISO 21870-2007(2017) Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
KS M ISO 21870-2007(2022) Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
KS M ISO 21870:2007 Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
KS D 3052-2002(2017) Shape, dimensions, weight and tolerances of hot-rolled steel flats
KS D 3052-1986 Shape, dimensions, weight and tolerances of hot-rolled steel flats
KS D 3502-2015 Dimensions, mass and permissible variations of hot rolled steel sections
KS M 3048-1990(2001) TESTING METHODS OF PLASTICS BY THERMOGRAVIMETRY
KS D 3051-2002(2022) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
KS D 3052-2002(2022) Shape, dimensions, weight and tolerances of hot-rolled steel flats
KS P ISO 17190-4-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 4：Determination of moisture content by mass loss upon heating
KS C 2002-1998 Test method of thermal life evaluation of plastics by thermogravimetry
KS D ISO 1129:2005 Steel tubes for boilers, superheaters and heat exchangers-Dimensions, tolerances and conventional masses per unit length
KS B 6878-2011 Cabinet heater cylinders for liquefied butane gas
KS M ISO 11358-2006(2011) Plastics－Thermogravimetry(TG) of polymers－General principles
KS D 3051-2002(2017) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
KS L 3304-2012 Testing method for specific gravity and true porosity of insulating fire bricks
KS D 3502-2013 Dimensions, mass and permissible variations of hot rolled steel sections
KS D 3052-2002 Shape, dimensions, weight and tolerances of hot-rolled steel flats
KS P ISO 17190-4:2011 Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 4：Determination of moisture content by mass loss upon heating
KS D 2711-2008 Evaluation of carbon nanotube soots and non-carbon content-Thermogravimetric analysis
KS D 3051-2002 Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
KS L 3304-2012(2022) Testing method for specific gravity and true porosity of insulating fire bricks
KS L 3303-2007 Testing method for reheat shrinkange of insulating fire bricks
KS B 0867-2021 Method of controlled thermal severity weld cracking test
KS P ISO 17190-4:2021 Urine-absorbing aids for incontinence -- Polyacrylate superabsorbent powders –Part 4: Test method for estimation of the moisture content as weight loss upon heating
KS C IEC 60779-2012(2022) Industrial electroheat equipment－Test methods for electroslag remelting furnaces
KS L 3304-2012(2017) Testing method for specific gravity and true porosity of insulating fire bricks
KS C IEC 60779-2012(2017) Industrial electroheat equipment－Test methods for electroslag remelting furnaces
KS L 3304-1964 Testing method for specific gravity and true porosity of insulating fire bricks
KS L 3304-1987 Testing method for specific gravity and true porosity of insulating fire bricks
KS E ISO 10251-2008(2018) Copper, lead, zinc and nickel concentrates－Determination of mass loss of bulk material on drying
KS D 2711-2008(2018) Evaluation of carbon nanotube soots and non-carbon content－Thermogravimetric analysis
KS C IEC 60779:2012 Industrial electroheat equipment-Test methods for electroslag remelting furnaces
KS M ISO 11358:2006 Plastics－Thermogravimetry(TG) of polymers－General principles
KS D 0100-1999 Method of heat balance for continuous reheating furnace for steel
KS M ISO 11358-1-2017(2022) Plastics - Thermogravimetry(TG) of polymers - Part1: General principles
KS V 0812-2006(2016) Shop test code for marine AC electric overheadtravelling cranes in engine room
KS V 0812-1972 Shop test code for marine AC electric overheadtravelling cranes in engine room
KS D 3500-2003 Dimensions, weight and permissible variations of hot rolled steel plates, sheets and strip
KS D ISO 1460:2002 Hot dip galvanized coating on ferrous materials - Gravimetric determination of the mass per unit area
KS B ISO 15042:2006 Multiple split-system air-conditioners and air-to-air heat pumps－Testing and rating for performance
KS M ISO 11358-1:2017 Plastics - Thermogravimetry(TG) of polymers - Part1: General principles
KS F ISO 16987-2006(2011) Wood-based panels－Determination of moisture resistance under cyclic test conditions

Professional Standard - Machinery, Thermogravimetric and thermogravimetric

JB/T 9141.7-1999 Test method for loss of weight by heated of flexible graphite sheets by sliding
JB/T 6856-1993 Thermogravimetry-differential thermal analyzer
JB/T 6856-2017 Thermogravimetric-Differential Thermal Analyzer
JB/T 9141.7-2013 Flexible graphite sheets.Part 7: Test method for weight loss by heated
JB/T 7688.11-1995 Technical conditions of metallurgical cranes Heating furnace loading and unloading cranes
JB/T 7688.8-2015 Specifications for metallurgical cranes Part 8: Clamp cranes for soaking furnaces
JB/T 1544-2015 Rapid test procedure for thermal endurance of electrical insulating impregnting varnishes and varnished fabrics.Thermogravameric point slope(TPS) method
JB/T 1544-1999 Rapid test procedure for thermal endurance of electrical insulating impregnating varnishes and varnished fabrics-thermogravameric point slope (TPS)method
JB/T 4716-1992 Type and basic parameter of vertical thermo-syphon reboiler
JB/T 8340-2013 Special products of silicon carbide.Recrystallized silicon carbide thermocouple protection tube

SE-SIS, Thermogravimetric and thermogravimetric

SIS 92 35 04-1974 Floorings. Determination of dimensional changes and loss in weight on heating
SIS SS IEC 779:1989 Industrial electroheating installations — Test methods for e/ectro-slag remelting furnaces
SIS 18 60 16 E-1973 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.

British Standards Institution (BSI), Thermogravimetric and thermogravimetric

BS ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry
BS 7944:1999 Type 1 heavy duty fire blankets and type 2 heavy duty heat protective blankets
PD IEC/TR 63130:2018 Dimming and hot restrike of metal halide lamps
BS EN 12482-1:1998 Aluminium and aluminium alloys - Reroll stock for general applications - Specifications for hot rolled reroll stock
BS ISO 17190-4:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for estimation of the moisture content as weight loss upon heating
BS ISO 247-2:2018 Rubber. Determination of ash. Thermogravimetric analysis (TGA)
BS EN 60068-2-51:2000 Environmental testing - Test methods - Tests - Tests Z/BFc - Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
BS ISO 22821:2021 Carbon-fibre-reinforced composites. Determination of fibre weight content by thermogravimetry (TG)
BS ISO 19935-3:2021 Plastics. Temperature modulated DSC. Separation of overlapping thermal transitions
BS EN ISO 11358-1:2022 Plastics. Thermogravimetry (TG) of polymers - General principles
BS EN 4383:2007 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
BS EN 4383:2006 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
19/30394366 DC BS ISO 17190-4. Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Part 4. Test method for estimation of the moisture content as weight loss upon heating
BS EN ISO 11358-1:2014 Plastics. Thermogravimetry (TG) of polymers. General principles
BS EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles
BS EN 60068-2-50:2000 Environmental testing - Test methods - Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens
19/30377051 DC BS ISO 22821. Carbon-fibre-reinforced composites. Determination of fibre weight content. By thermograrvimetry (TG)
BS ISO 11358-2:2005 Plastics - Thermographimetry (TG) of polymers - Determination of activation energy
BS ISO 11358-2:2014 Plastics. Thermogravimetry (TG) of polymers. Determination of activation energy
BS ISO 11358-2:2021 Plastics. Thermogravimetry (TG) of polymers. Determination of activation energy
BS IEC 62651:2013 Nuclear power plants. Instrumentation important to safety.Thermocouples: characteristics and test methods
BS EN ISO 1460:1995 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
BS EN 60779:2006 Industrial electroheat Equipment - Test methods for electroslag remelting furnaces
BS EN 60779:2005 Industrial electroheat equipment - Test methods for electroslag remelting furnaces
PD ISO/TS 11308:2020 Nanotechnologies. Characterization of carbon nanotube samples using thermogravimetric analysis
18/30370356 DC BS EN 60779. Installations for electroheating and electromagnetic processing. Test methods for electroslag remelting furnaces
BS ISO 5660-1:2015+A1:2019 Reaction-to-fire tests. Heat release, smoke production and mass loss rate - Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
BS EN ISO 6179:2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
BS EN IEC 60519-8:2020 Safety in installations for electroheating and electromagnetic processing - Particular requirements for electroslag remelting furnaces

Professional Standard - Petrochemical Industry, Thermogravimetric and thermogravimetric

SH/T 0731-2004 Standard test method for evaporation loss of lubricating oils by thermogravimetric analyzer (TGA) Noack method
SH/T 1499.10-2012 Pure adipic acid.Part 10:Determination of content of moisture.Thermogravimetric method

International Organization for Standardization (ISO), Thermogravimetric and thermogravimetric

ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry
ISO 6964:1986 Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification
ISO 1129:1977 Title missing - Legacy paper document
ISO 1129:1980 Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length
ISO/CD 22207:1980 Kraft lignin - Determination of thermal stability by Thermogravimetry
ISO/DIS 22207:2023 Kraft lignin — Determination of thermal stability by Thermogravimetry
ISO 14920:1999 Thermal spraying - Spraying and fusing of self-fluxing alloys
ISO 14920:2015 Thermal spraying - Spraying and fusing of self-fluxing alloys
ISO 22821:2021 Carbon-fibre-reinforced composites - Determination of fibre weight content by thermogravimetry (TG)
ISO 17190-4:2020 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 4: Test method for estimation of the moisture content as weight loss upon heating
ISO 17190-4:2001 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 4: Determination of moisture content by mass loss upon heating
ISO 11358-1:2022 Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
ISO 247-2:2018 Rubber - Determination of ash - Part 2: Thermogravimetric analysis (TGA)
ISO 15042:2011 Multiple split-system air-conditioners and air-to-air heat pumps - Testing and rating for performance
ISO 15042:2017 Multiple split-system air conditioners and air-to-air heat pumps - Testing and rating for performance
ISO 2477:2005 Shaped insulating refractory products - Determination of permanent change in dimensions on heating
ISO 2477:1987 Shaped insulating refractory products; Determination of permanent change in dimensions on heating
ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
ISO 19935-3:2021 Plastics - Temperature modulated DSC - Part 3: Separation of overlapping thermal transitions
ISO/TS 11308:2020 Nanotechnologies — Characterization of carbon nanotube samples using thermogravimetric analysis

Association Francaise de Normalisation, Thermogravimetric and thermogravimetric

NF T45-135*NF ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry.
NF EN 12145:1996 Jus de fruits et de légumes - Détermination du résidu sec total - Méthode gravimétrique par perte de poids à la dessication.
NF P85-701:2003 Jointing products - Identification tests - Thermal gravimetric analysis.
NF P85-701:2022 Produits pour joints - Essais d'identification - Analyse thermogravimétrique
NF A45-309:1984 Iron and steel products. Hot-rolled. 26 kg/m flat bottom railway rail and fishplates.
NF EN IEC 60779:2020 Installations pour traitement électrothermique et électromagnétique - Méthodes d'essai des fours de refusion sous laitier électroconducteur
NF A45-310:1984 Iron and steel products. Hot-rolled. 30 kg/m flat bottom railway rails and fishplates.
NF A45-313:1984 Iron and steel products. Hod-rolled. 46 kg/m flat bottom ralway rail and fishplate.
NF A45-316:1984 Iron and steel products. Hod-rolled. 55 kg/m flat bottom railway rail and fishplate.
NF D40-001:1989 Equipment for collective restaurants. Fast chilling cells, freezing cells, reheating equipments and isothermic containers. Measuring of thermic performances.
NF A91-123:1995 Metallic coatings. Hot dip galvanized coatings on ferrous materials. Gravimetric determination of the mass per unit area.
NF A45-311:1983 Iron and steel. Hot-rolled products. Vignole type 36 kg/m rail with fish-plate.
NF P75-302:1987 Isolants thermiques de bâtiment manufacturés - Détermination de l'absorption d'eau par gravité des isolants rigides et semi-rigides - Non hydrophilie.
NF T51-226-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1 : general principles
NF C79-679*NF EN 60779:2006 Industrial electroheat equipment - Test methods for electroslag remelting furnaces
NF A45-314:1982 Iron and steel. Hot-rolled products. Vignole type 50 kg/m rail with fish-plate. Characteristics and tolerances.
NF A45-315:1982 Iron and steel. Hot-rolled products. Vignole type 52 kg/m rail with fish-plate. Characteristics and tolerances.
NF A45-317:1982 Iron and steel. Hot-rolled products. Vignole type 60 kg/m rail with fish-plate. Characteristics and tolerances.
NF EN ISO 11358-1:2022 Plastiques - Thermogravimétrie (TG) des polymères - Partie 1 : principes généraux

Professional Standard - Education, Thermogravimetric and thermogravimetric

JY/T 0589.5-2020 General Principles of Thermal Analysis Methods Part 5: Thermogravimetric-Differential Thermal Analysis and Thermogravimetric-Differential Scanning Calorimetry
JY/T 0589.4-2020 General Principles of Thermal Analysis Methods Part 4: Thermogravimetry

Hebei Provincial Standard of the People's Republic of China, Thermogravimetric and thermogravimetric

DB13/T 1236-2010 Determination method of loss on drying (loss on heating) of chemical products

American Society for Testing and Materials (ASTM), Thermogravimetric and thermogravimetric

ASTM E2402-11(2017) Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-19 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM C771-03(2009) Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
ASTM E1868-10 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM D2688-05 Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Methods)
ASTM C771-14(2019) Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
ASTM C771-97 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
ASTM C771-03 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
ASTM C771-14 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
ASTM D6375-09 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D2688-11 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
ASTM C792-04 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-93(1998) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-15(2020) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-23 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-15 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM D2688-94(1999)e1 Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Methods)
ASTM D2688-15e1 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
ASTM D2688-15 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
ASTM D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM E2550-17 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM C792-04(2008) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C1246-00(2006) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C1246-17(2022) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C1246-00(2012) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM E1877-17 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
ASTM E1877-00 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E1877-21 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
ASTM C1246-00 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C1246-17 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D3014-99 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
ASTM D3588-98 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D3588-98(2003) Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1877-00(2005) Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
ASTM UOP1039-20 Automated Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents by Thermogravimetric Analysis (TGA)
ASTM D6382/D6382M-99(2022) Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM E914-83(1993)e1 Practice for Evaluating Temperature Scale for Thermogravity
ASTM D7582-10e1 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E1877-00(2010) Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
ASTM E1877-11 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
ASTM E1877-15 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
ASTM E1877-13 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
ASTM D3850-19 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D6822-12b(2017)e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM C1872-18e1 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement
ASTM D2288-97 Standard Test Method for Weight Loss of Plasticizers on Heating
ASTM C1872-18 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement
ASTM D228-08 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
ASTM D2288-97(2001) Standard Test Method for Weight Loss of Plasticizers on Heating
ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E2008-08(2014)e1 Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM C1872-18e2 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement
ASTM A630-03(2009) Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A630-98 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A630-16 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1582-04 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1131-98 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2008-17(2021) Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM E2008-17 Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1582-14 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1582-10 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1131-08 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM D3588-98(2017) Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D3850-94(2000) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D3850-94(2006) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D3850-12 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D4797-12a Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking
ASTM D4797-17(2022) Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking
ASTM D4797-17 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking
ASTM D4797-12 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking
ASTM F1868-23 Standard Test Method for Thermal Resistance, Evaporative Resistance, and Total Heat Loss Measurements of Clothing Materials Using a Sweating Hot Plate
ASTM E1582-00 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1868-97 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E2008-07 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E1641-07 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1131-20 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1641-07(2012) Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM D6370-99(2003) Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM E2008-08 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E1868-09 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1868-10(2015) Standard Test Methods for Loss-On-Drying by Thermogravimetry

National Metrological Verification Regulations of the People's Republic of China, Thermogravimetric and thermogravimetric

JJG 1135-2017 Thermogravimetric Analyzers

工业和信息化部/国家能源局, Thermogravimetric and thermogravimetric

JB/T 7405-2017 Thermogravimetric Analyzer
JB/T 13027-2017 Technical requirements for carburizing heat treatment of heavy-duty gears

German Institute for Standardization, Thermogravimetric and thermogravimetric

DIN 51006:2023-03 Thermal analysis - Thermogravimetry - Principles / Note: Date of issue 2023-01-27*Intended as replacement for DIN 51006 (2005-07).
DIN 51006:2005-07 Thermal analysis (TA) - Thermogravimetry (TG) - Principles / Note: To be replaced by DIN 51006 (2023-03) (in preparation).
DIN 51006:2005 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
DIN EN 12145:1996 Fruit and vegetable juices - Determination of total dry matter - Gravimetric method with loss of mass on drying; German version EN 12145:1996
DIN EN 4384:2007-10 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock; German and English version EN 4384:2007
DIN EN 4383:2007-04 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock; German and English version EN 4383:2006
DIN EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997); German version EN ISO 11358:1997
DIN 55655-9:2017 Paints and varnishes - Electro-deposition paints - Part 9: Loss on stoving
DIN 10290:1981-11 Thermohydrometer for the density measurement of milk and skim-milk
DIN 53800-1:2003 Textiles - Determination of commercial mass - Part 1: Determination of dry mass by dessication in hot air
DIN EN 204:2001 Classification of thermoplastic wood adhesives for non-structural applications; German version EN 204:2001
DIN 1027:2004 Steel bars - Hot-rolled zees with round edges - Dimensions, masses, tolerances, static values
DIN 55423-1:1994 Reusable transport and storing crates for food made of thermoplastic plastics, stackable - Part 1: Dimensions, weights, requirements
DIN 1022:2004 Steel bars - Hot-rolled square root equal angles (LS-steel) - Dimensions, masses and tolerances
DIN 1026-1:2009 Hot rolled steel channels - Part 1: Taper flange steel channels - Dimensions, masses and sectional properties

RU-GOST R, Thermogravimetric and thermogravimetric

GOST 32334-2013 Lubricating oils. Determination of evaporation loss of by thermogravimetric analyzer (TGA) Noack method
GOST R 54729-2011 Food common salt. Measurement (determination) of moisture mass fraction by thermo-gravimetric method
GOST 27800-1993 Alumina. Method for the determination of loss of mass on ignition
GOST 12612-1979 Metallurgical soaking pit cranes. Basic parameters
GOST R 57946-2017 Polymer composites. Calculating of materials thermal endurance from thermogravimetric decomposition data
GOST R 8.728-2010 State system for ensuring the uniformity of measurements. Estimation of errors of measurements of thermal energy and weight of the heat-carrier of water systems of the heat supply
GOST 22030-1991 Products and materials, asbestos technical. Method of test for moisture, substance loss by heating and asbestos content
GOST R 57988-2017 Polymer composites. Thermogravimetric analysis coupled with analysis by infrared spectroscopy (TGA/IR)
GOST 29127-1991 Plastics. Thermogravimetry of polymers. Temperature scanning method

Group Standards of the People's Republic of China, Thermogravimetric and thermogravimetric

T/CTES 1019-2019 Determination of Silk Weighting Agent Content by Thermogravimetric Method
T/SSEA 0240-2022 Hot rolled angle steel for tower crane
T/GRM 066-2023 Technical Specification for GravityMagneticElectromagnetic Exploration of Hot Dry Rocks
T/ZNL 001-2021 The detection method for anti-thermal aging performance of electric vehicle charging cable Thermogravimetric analysis
T/CSEE 0073-2018 Thermogravimetric test and evaluation method of combustion performance of power coal

PL-PKN, Thermogravimetric and thermogravimetric

PN H83159-1990 Heat resistant and resistant heavy duty cast steel Grades
PN C04302-1989 Coke of hard coal Thermogravimetric method of combustibility determina.tion
PN C89431-1993 Plastics. Thermogravimetry of polymers. Temperature scanning method
PN E02303-08-1992 Safety in electroheat installations Particular re?uirements for elctro-slag remelting furnaces
PN-EN IEC 60779-2021-03 E Installations for electroheating and electromagnetic processing - Test methods for electroslag remelting furnaces (IEC 60779:2020)

NZ-SNZ, Thermogravimetric and thermogravimetric

NZSS GP 43-1965 ELECTRICALLY-HEATED HOT FOOD SERVICE COUNTERS (BAIN MARIE TYPE) WITH CUPBOARDS
NZSS GP 49-1963 STANDARD SPECIFICATION (GOVERNMENT PURCHASING SERIES) FOR STEAM-HEATED HOT-FOOOD SERVICE COUNTERS (BAIN-MARIE TYPE) WITH CLIPBOARDS

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Thermogravimetric and thermogravimetric

ASHRAE 4560-2002 Heat Pump Life Revisited
ASHRAE 4556-2002 Retrocommissioning of Central Chilled/Hot Water Systems
ASHRAE 3712-1993 Skin Temperature and Evaporative Heat Loss Variations for Men and Women in Thermal Comfort

International Federation of Trucks and Engines, Thermogravimetric and thermogravimetric

NAVISTAR TMS 6015-1989 VOID - Hose, Radiator Heavy Duty

Professional Standard - Aerospace, Thermogravimetric and thermogravimetric

QJ 1285.2-1987 Aluminum coreless gravity heat pipe
QJ 1285.1-1987 Coreless gravity heat pipe aluminum tube
QJ 990.13-1986 Coating inspection method Determination method of specific gravity of thermal insulation coating

(U.S.) Ford Automotive Standards, Thermogravimetric and thermogravimetric

FORD FLTM BZ 154-1-2002 THREMOGRAVIMETRIC ANALYSIS (TGA) OF GASOLINE GUMS
FORD FLTM BZ 154-01-2002 THREMOGRAVIMETRIC ANALYSIS (TGA) OF GASOLINE GUMS
FORD WK902-2005 DIMENSIONS, MATERIAL AND HEAT TREATMENT, AND PERFORMANCE OF HEAVY DUTY SPRING BAND HOSECLAMPS
FORD WK 902-2010 DIMENSIONS, MATERIAL AND HEAT TREATMENT, AND PERFORMANCE OF HEAVY DUTY SPRING BAND HOSECLAMPS
FORD FLTM BV 153-3-2001 RESISTANCE OF SEALERS AND HEAVY MASTIC ADHESIVES TO HEAT (Replaces FLTM EU-BV 053-03)
FORD WK 902 APPENDIX A-2013 DIMENSIONS, MATERIAL AND HEAT TREATMENT, AND PERFORMANCE OF HEAVY DUTY SPRING BAND HOSECLAMPS
FORD WK 902-2013 DIMENSIONS, MATERIAL AND HEAT TREATMENT, AND PERFORMANCE OF HEAVY DUTY SPRING BAND HOSECLAMPS
FORD WSS-M5G44-C3-1996 DEADENER, HEAVY WEIGHT, HEAT BONDABLE (Shown on WSS-M5G44-C1)

Professional Standard - Military and Civilian Products, Thermogravimetric and thermogravimetric

WJ 2292-1995 Verification Regulations for Thermogravimetric Analyzer

Professional Standard - Commodity Inspection, Thermogravimetric and thermogravimetric

SN/T 2240-2008 Accelerated storage test,thermal analysis methods for dangerous goods.Differential thermal analysis(DTA)and thermo gravimetric analysis(TGA)
SN/T 3003-2011 Plastics. Thermogravimetry (TG) of polymers. General principle
SN/T 3126-2012 Determination of sulfated ash of organic materials.Thermogravimetry
SN/T 3116-2012 Determination of nonvolatile matter of agricultural adjuvant solutions.Thermogravimetry

US-FCR, Thermogravimetric and thermogravimetric

FCR UFGS-34 11 19.00 20-2006 WELDING CRANE AND RAILROAD RAIL - THERMITE METHOD

International Electrotechnical Commission (IEC), Thermogravimetric and thermogravimetric

IEC TR 63130:2018 Dimming and hot restrike of metal halide lamps
IEC 60779:2005 Industrial electroheat equipment - Test methods for electroslag remelting furnaces
IEC 60779:2020 Installations for electroheating and electromagnetic processing - Test methods for electroslag remelting furnaces
IEC 62651:2013 Nuclear power plants - Instrumentation important to safety - Thermocouples: Characteristics and test methods

North Atlantic Treaty Organization Standards Agency, Thermogravimetric and thermogravimetric

STANAG 4515-2002 EXPLOSIVES: THERMAL CHARACTERIZATION BY DIFFERENTIAL THERMAL ANALYSIS, DIFFERENTIAL SCANNING CALORIMETRY AND THERMOGRAVIMETRIC ANALYSIS

HU-MSZT, Thermogravimetric and thermogravimetric

WRC - Welding Research Council, Thermogravimetric and thermogravimetric

BULLETIN 72-1961 THERMAL FATIGUE – A CRITICAL REVIEW

American National Standards Institute （ANSI), Thermogravimetric and thermogravimetric

ANSI/NSF 4-2002 Commercial Cooking, Rethermalization and Powered Hot Food Holding and Transport Equipment
ANSI/ASTM D2288:2001 Test Method for Weight Loss of Plasticizers on Heating (X-15-373-1) (08.02)
ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
ANSI/ASTM D2444:1999 Test Method For Determination Of The Impact Resistance Of Thermoplastic Pipe And Fittings By Means Of A Tup Falling Weight

CZ-CSN, Thermogravimetric and thermogravimetric

CSN 72 1565 Cast.6-1985 Testing of brick clays. Determination of the weight loss by burning, of the water intake, apparent porosity and bulk density
CSN 30 4152-1966 Heater plugs double pole, conic seal
CSN 65 7066-1985 Method od test for effect of heat on weight of asphaltic materials
CSN 42 5678-1981 Hot rolled rails of 10 steel grade for crane runways. Dimensions

Lithuanian Standards Office , Thermogravimetric and thermogravimetric

LST EN 12145-2000 Fruit and vegetable juices - Determination of total dry matter - Gravimetric method with loss of mass on drying
LST EN 4384-2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock
LST EN 4383-2007 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
LST EN ISO 11358:2001 Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997)
LST EN 60779-2006 Industrial electroheat equipment. Test methods for electroslag remelting furnaces (IEC 60779:2005)
LST EN 15935-2012 Sludge, treated biowaste, soil and waste - Determination of loss on ignition

AENOR, Thermogravimetric and thermogravimetric

UNE-EN 12145:1997 Fruit and vegetable juices - Determination of total dry matter - Gravimetric method with loss of mass on drying

GOSTR, Thermogravimetric and thermogravimetric

GOST IEC 60811-3-2-2011 Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Loss of mass test. Thermal stability test
PNST 307-2018 Nanotechnologies. Single-wall carbon nanotubes. Characterization using thermogravimetric analysis

国家市场监督管理总局、中国国家标准化管理委员会, Thermogravimetric and thermogravimetric

GB/T 38805-2020 Technical requirements of heat treatment for heavy duty gears
GB/T 709-2019 Dimension,shape,weight and tolerance for hot-rolled steel strip,plate and sheet
GB/T 33047.2-2021 Plastics—Thermogravimetry (TG) of polymers—Part 2: Determination of activation energy

Shandong Provincial Standard of the People's Republic of China, Thermogravimetric and thermogravimetric

DB37/T 4344-2021 Technical requirements for safe operation of steel-water gravity heat pipe heat exchanger
DB37/T 1639.8-2019 Water use quotas for key industrial products in Shandong Province Part 8: Key industrial products in the production and supply of electricity and heat

European Committee for Standardization (CEN), Thermogravimetric and thermogravimetric

EN 12482-1:1998 Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock
EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of Polymers - General Principles ISO 11358: 1997
EN ISO 1460:2020 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020)
EN ISO 11358-1:2022 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2022)

NATO - North Atlantic Treaty Organization, Thermogravimetric and thermogravimetric

STANAG 4515-2015 EXPLOSIVES. THERMAL ANALYSIS USING DIFFERENTIAL THERMAL ANALYSIS (DTA). DIFFERENTIAL SCANNING CALORIMETRY (DSC)@ HEAT FLOW CALORIMETRY (HFC)@ AND THERMOGRAVIMETRIC ANALYSIS (TGA) (ED 2)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Thermogravimetric and thermogravimetric

GB/T 35930-2018 Determination of vapor pressure of chemical products—Thermogravimetry method
GB/T 33304-2016 Testing method of combustion characteristics of coal—Thermogravimetric analysis
GB/T 702-2017 Hot-rolled steel bars—Dimensions,shape,weight and tolerances
GB/T 24131.2-2017 Rubber,raw—Determination of volatile-matter content—Part 2:Thermogravimetric methods using an automatic analyser with an infrared drying unit
GB/T 4498.2-2017 Rubber—Determination of ash—Part 2: Thermogravimetric analysis
GB/T 35924-2018 Determination of moisture in solid chemical products－Thermogravimetry method

KR-KS, Thermogravimetric and thermogravimetric

KS C 2002-1998(2023) Test method of thermal life evaluation of plastics by thermogravimetry
KS D 3051-2002(2017)(英文版) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
KS D 2711-2008(2023) Evaluation of carbon nanotube soots and non-carbon content－Thermogravimetric analysis
KS P ISO 17190-4-2021 Urine-absorbing aids for incontinence -- Polyacrylate superabsorbent powders –Part 4: Test method for estimation of the moisture content as weight loss upon heating
KS M ISO 11358-2-2017 Plastics - Thermogravimetry(TG) of polymers - Part2: Determination of activation energy
KS M ISO 11358-1-2017 Plastics - Thermogravimetry(TG) of polymers - Part1: General principles

国家质量监督检验检疫总局, Thermogravimetric and thermogravimetric

SN/T 3078.2-2015 Determination of thermal stability of chemicals Part 2: Thermogravimetric analysis

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Thermogravimetric and thermogravimetric

ASHRAE AN-04-7-3-2004 Heat-Activated Dual-Function Absorption Cycle

ESDU - Engineering Sciences Data Unit, Thermogravimetric and thermogravimetric

ESDU 68023-1978 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of solid@ liquid and gaseous heavy water.
ESDU 82032 D-2003 Thermophysical properties of industrially important fluids on the saturation line: Cresols.
ESDU 82004 D-2003 Thermophysical properties of industrially important fluids on the saturation line: Phenol.
ESDU 81010-1981 Thermophysical properties of industrially important fluids on the saturation line: ammonia.
ESDU 83005 A-2003 Thermophysical properties of industrially important fluids on the saturation line: Xylenols.

Professional Standard - Energy, Thermogravimetric and thermogravimetric

NB/T 20375-2016 Thermocouples important to safety in nuclear power plants
NB/T 10702-2021 Technical specification for interpretation of gravity, magnetoelectric data in geothermal exploration
NB/SH/T 0867-2013 Standard test method for determination of soot in diesel engine oils by thermal gravimetric analyzer
NB/T 20305-2014 Ageing management guideline for feeder pipe of pressurized heavy water nuclear power plants

Japanese Industrial Standards Committee (JISC), Thermogravimetric and thermogravimetric

JIS K 7120:1987 Testing methods of plastics by thermogravimetry
JIS G 3194:1966 Shape dimensions, weight and tolerance of hot rolled flats steel
JIS R 2614:1985 Testing method for specific gravity and true porosity of insulating fire bricks
JIS R 4302:1993 Testing method for determining pickling weight loss of sheet steel for vitreous and porcelain enamelling
JIS G 3191:1966 Shape, dimensions, weight and tolerance for hot rolled steel bar and bar-in-coil

NL-NEN, Thermogravimetric and thermogravimetric

NEN 2875-1988 Testing of stony materials Sandblast apparatus and determination of loss in mass

农业农村部, Thermogravimetric and thermogravimetric

NY/T 3496-2019 Kinetic parameters of thermal cracking of agricultural biomass raw materials using thermogravimetric analysis
NY/T 3495-2019 General principles of thermogravimetric analysis of agricultural biomass raw materials
NY/T 3497-2019 Industrial Analysis of Agricultural Biomass Raw Materials by Thermogravimetric Analysis

PT-IPQ, Thermogravimetric and thermogravimetric

NP 68-1956

European Association of Aerospace Industries, Thermogravimetric and thermogravimetric

AECMA PREN 4383-1997 Aerospace Series Heat Resisting Alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) Non Heat Treated Remelting Stock Edition P 1
AECMA PREN 4384-1997 Aerospace Series Heat Resisting Alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) Non Heat Treated Remelting Stock Edition P 1

ES-UNE, Thermogravimetric and thermogravimetric

UNE-EN 4384:2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock (Endorsed by AENOR in November of 2007.)
UNE-EN 4383:2006 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock (Endorsed by AENOR in April of 2007.)
UNE-EN 60779:2005 Industrial electroheat equipment - Test methods for electroslag remelting furnaces (Endorsed by AENOR in February of 2006.)
UNE-EN IEC 60779:2020 Installations for electroheating and electromagnetic processing - Test methods for electroslag remelting furnaces (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-ISO 247-2:2022 Rubber. Determination of ash. Part 2. Termogravimetric análisis (TGA)
UNE-EN ISO 11358-1:2022 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2022)

General Motors Corporation (GM), Thermogravimetric and thermogravimetric

GM 9984805-2005 UV/Thermal Dual Cure Primer For Plastic Substrates

IPC - Association Connecting Electronics Industries, Thermogravimetric and thermogravimetric

IPC TM-650 2.4.37.2-1993 Evaluation of Hand Soldering Tools on Heavy Thermal Loads

Professional Standard - Environmental Protection, Thermogravimetric and thermogravimetric

HJ 1024-2019 Gravimetric method for determination of thermal ignition loss rate of solid waste

GM North America, Thermogravimetric and thermogravimetric

GM GM9337P-1998 Test Method to Determine Fiber Weight Loss and Wear on Carpet

Electronic Components, Assemblies and Materials Association, Thermogravimetric and thermogravimetric

ECA TEB23-A-1981 Spot Pulse Width and Repetition Rate in Raster Dot Alpha-Numeric CRT Presentations for Rectangular Pulses

NEMA - National Electrical Manufacturers Association, Thermogravimetric and thermogravimetric

NEMA HE 1-1980 MANUAL FOR CALCULATING HEAT LOSS AND HEAT GAIN FOR ELECTRIC COMFORT CONDITIONING (R 1986)

BE-NBN, Thermogravimetric and thermogravimetric

NBN-EN 304-1993 Heating boilers. Test code for heating boilers for atomizing oil burners

Taiwan Provincial Standard of the People's Republic of China, Thermogravimetric and thermogravimetric

CNS 11738-1986 Method of Test for Specific Gravity and True Porosity of Insulating Fire Bricks

International Telecommunication Union (ITU), Thermogravimetric and thermogravimetric

ITU-R INFORME BS.472-2 SPANISH-1990 Single-sideband reception for re-broadcasting applications within the Tropical Zone
ITU-R REPORT BS.472-2-1990 Single-sideband reception for re-broadcasting applications within the Tropical Zone

Professional Standard - Agriculture, Thermogravimetric and thermogravimetric

GB 704-1983 Dimensions, shapes, weights and allowable deviations of hot-rolled flat steel

Professional Standard - Ferrous Metallurgy, Thermogravimetric and thermogravimetric

YB/T 002-1991 Dimensions, shapes, weights and allowable deviations of hot-rolled billets

未注明发布机构, Thermogravimetric and thermogravimetric

NB 20493-2018 Identification of thermocouple thermometers important for nuclear power plant safety
BS EN IEC 60779:2020 Installations for electroheating and electromagnetic processing — Test methods for electroslag remelting furnaces

国家能源局, Thermogravimetric and thermogravimetric

NB/T 20493-2018 Identification of thermocouple thermometers important for nuclear power plant safety

European Committee for Electrotechnical Standardization（CENELEC）, Thermogravimetric and thermogravimetric

EN IEC 60779:2020 Installations for electroheating and electromagnetic processing - Test methods for electroslag remelting furnaces

Professional Standard - Non-ferrous Metal, Thermogravimetric and thermogravimetric

YS/T 118.7-1992 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (submerged heat smelting electric furnace)

CH-SNV, Thermogravimetric and thermogravimetric

SNV 24507-1937

National Electrical Manufacturers Association（NEMA), Thermogravimetric and thermogravimetric

NEMA LI 6-1993 Relative Temperature Indices of Industrial Thermosetting Laminates (Reaffirm Letter)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Thermogravimetric and thermogravimetric

PREN 4384-1997 Aerospace Series Heat Resisting Alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) Non Heat Treated Remelting Stock (Edition P 1)
PREN 4383-1997 Aerospace Series Heat Resisting Alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) Non Heat Treated Remelting Stock (Edition P 1)
PREN 4368-1997 Aerospace Series Heat Resisting Alloy NI-CD1701 (NiCo15Cr10Al6Ti5Mo3) Non Heat Treated Remelting Stock (Edition P 1)
PREN 4094-1997 Aerospace Series Heat Resisting Alloy NI-CH1305 (NiCr16Co10Mo8Al4Ti4) Vacuum Melted Non Heat Treated Remelting Stock (Edition P 1)
PREN 4096-1996 Aerospace Series Heat Resisting Alloy NI-CD14XX (NiCo10W10Cr9Al6Ta3Hf2Ti2) Vacuum Melted Non Heat Treated Remelting Stock (Edition P 1)
PREN 4096-1997 Aerospace Series Heat Resisting Alloy NI-CD1401 (NiCo10W10Cr9Al6Ta3) Vacuum Melted Non Heat Treated Remelting Stock (Edition P 1)

Defense Logistics Agency, Thermogravimetric and thermogravimetric

DLA A-A-59714 A-2003 RESISTORS, THERMAL, NON-LINEAR THERMISTOR (RESETTABLE FUSES) GENERAL REQUIREMENTS FOR

Professional Standard - Light Industry, Thermogravimetric and thermogravimetric

QB/T 2957-2008 Determination of starch content of starch based plastics Thermogravimetry(TG)

中国有色金属工业总公司, Thermogravimetric and thermogravimetric

YS/T 118-1992 Measurement and calculation methods for heat balance of heavy non-ferrous metals and furnaces

Society of Automotive Engineers (SAE), Thermogravimetric and thermogravimetric

SAE AMS5873G-2020 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La Consumable Electrode Remelted, Solution Heat Treated
SAE AMS6305D-2002 Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr 0.55Mo 0.30V (0.40 - 0.50C) Vacuum Arc Remelted
SAE AMS6305D-2007 Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc Remelted
SAE AMS6408A-2000 Steel, Hotwork Tool, Bars and Forgings 5.25Cr - 1.5Mo - 1.0V (0.35-0.45C) Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed
SAE AMS5744F-2019 Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Consumable Electrode Remelted Heat Treated, 170 ksi (1172 MPa) Tensile Strength
SAE AS5419/1-2014 WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 °C
SAE AMS5873F-2014 Nickel Alloy@ Corrosion and Heat-Resistant@ Sheet@ Strip@ and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30AI - 0.05La Consumable Electrode Remelted@ Solution Heat Treated (UNS N06635)
SAE AMS5549G-1987 (Noncurrent)Steel, Corrosion and Heat Resistant, Plate 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated UNS S35500; Reaffirmed Noncurrent April 2001
SAE AMS6408B-2004 Steel, Hotwork Tool, Bars and Forgings 5.2Cr 1.5Mo 1.0V (0.35-0.45C) Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed
SAE AMS5876D-2014 Cobalt Alloy, Corrosion and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Vacuum Induction Plus Consumable Electrode Remelted Solution Heat Treated and Cold Rolled

YU-JUS, Thermogravimetric and thermogravimetric

JUS H.C8.203-1989 Pigments and extenders. Determination of matter soluble in water (hot extraction). Gravimetric method

The American Road & Transportation Builders Association, Thermogravimetric and thermogravimetric

AASHTO T 209-2010 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
AASHTO T 209-2011 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
AASHTO T 209-2008 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)

AASHTO - American Association of State Highway and Transportation Officials, Thermogravimetric and thermogravimetric

T 209-2009 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
T 209-2008 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
T 209-2011 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
T 209-2010 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)

CENELEC - European Committee for Electrotechnical Standardization, Thermogravimetric and thermogravimetric

EN 60811-3-2:1995 Insulaking and sheathing materials of electric cables Common test methods Part 3: Methods specific to PVC compounds Section 2: Loss of mass test Thermal stability test

Underwriters Laboratories (UL), Thermogravimetric and thermogravimetric

UL 1693-1995 UL Standard for Safety Electric Radiant Heating Panels and Heating Panel Sets (First Edition; Reprint with Revisions Through and Including December 03@ 1997)

CU-NC, Thermogravimetric and thermogravimetric

NC 44-19-2-1988 Mineralogy. Dolomite, Magnesite and Limestone. Gravimetric Determination of Loss by Ignition

Association of German Mechanical Engineers, Thermogravimetric and thermogravimetric

VDI 2055 Blatt 3-2011 Thermal insulation of heated and refrigerated operational installations in the industry and the building services - Technical basics for the verification of thermotechnical properties of insulation systems, determination of total heat losses

Professional Standard - Petroleum, Thermogravimetric and thermogravimetric

SY/T 6954-2013 Standard test method for high temperature oxidation kinetic parameters for heavy oil.Thermogravimetric method

Professional Standard - Tobacco, Thermogravimetric and thermogravimetric

YC/T 592-2021 Evaluation of quality stability of different batches of cigarette paper—Thermogravimetric analysis

Fujian Provincial Standard of the People's Republic of China, Thermogravimetric and thermogravimetric

DB35/T 1558-2016 Determination of carbon black content in polyolefin products by thermogravimetric analysis (TGA)

VN-TCVN, Thermogravimetric and thermogravimetric

TCVN 7665-2007 Metallic coatings.Hot dip galvanized coatings on ferrous materials.Gravimetric determination of the mass per unit area

SAE - SAE International, Thermogravimetric and thermogravimetric

SAE AMS6408E-2018 Steel@ Hotwork Tool@ Bars and Forgings 5.25Cr – 1.5Mo – 1.0V (0.35-0.45C) (H-13) Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed (UNS T20813)
SAE AMS6408A-1994 Steel@ Hotwork Tool@ Bars and Forgings 5.25Cr - 1.5Mo - 1.0V (0.35-0.45C) Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed (UNS T20813)
SAE AMS6305-1973 Steel Bars@ Forgings@ and Tubing@ Low-Alloy@ Heat-Resistant 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc Remelted
SAE AMS6305B-1991 Steel Bars@ Forgings@ and Tubing@ Low-Alloy@ Heat- Resistant 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc Remelted

ECIA - Electronic Components Industry Association, Thermogravimetric and thermogravimetric

GEN-104-1951 COLOR MARKING OF THERMOPLASTIC INSULATED HOOK-UP WIRE ((Reprinted June 1954))