ZH

RU

ES

Spectral broad peak

Spectral broad peak, Total:57 items.

In the international standard classification, Spectral broad peak involves: Optoelectronics. Laser equipment, Beverages, Semiconductor devices, Fibre optic communications, Analytical chemistry, Insulating fluids, Nuclear energy engineering, Plastics, Telecommunications in general, Non-ferrous metals, Optics and optical measurements.


Professional Standard - Electron, Spectral broad peak

  • SJ 2355.7-1983 Method of measurement for peak emission wavelength and spectral radiation bandwidth of light-emitting devices
  • SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
  • SJ/T 2658.12-2015 Measuring method for semiconductor infrared-emitting diode.Part 12: Peak-emission wavelength and spectral radiant bandwidth

Group Standards of the People's Republic of China, Spectral broad peak

  • T/BJWA 004-2022 Low Hertz 17O-NMR FWHM Natural Drinking Water
  • T/BJWA 005-2022 Determination of 17O-NMR FWHM in Water NMR Method
  • T/JCMS 0007-2022 Determination of the ultimate aerobic biodegradability of polylactic acid biodegradable materials under controlled composting conditions —Method by calculating the peak area of terahertz wide spectrum

Military Standard of the People's Republic of China-General Armament Department, Spectral broad peak

Gansu Provincial Standard of the People's Republic of China, Spectral broad peak

American National Standards Institute (ANSI), Spectral broad peak

TIA - Telecommunications Industry Association, Spectral broad peak

  • EIA/TIA-455-24-1991 FOTP-24 Water Peak Attenuation Measurement of Single-Mode Fibers
  • TIA/EIA-455-24-1991 FOTP-24 Water Peak Attenuation Measurement of Single-Mode Fibers
  • TIA-455-24-1991 FOTP 24 Water Peak Attenuation Measurement of Singlemode Fibers (WITHDRAWN JULY 2003)
  • TIA/EIA-492CAAB-2000 Detail Specification for Class IVa Dispersion-Unshifted Single-Mode Optical Fibers with Low Water Peak

American Society for Testing and Materials (ASTM), Spectral broad peak

  • ASTM E827-07 Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy
  • ASTM E827-95 Standard Practice for Indentifying Elements by the Peaks in Auger Electron Spectroscopy
  • ASTM E827-02 Standard Practice for Indentifying Elements by the Peaks in Auger Electron Spectroscopy
  • ASTM C1871-22 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
  • ASTM C1871-18a Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
  • ASTM C1871-18 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
  • ASTM E388-04(2023) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
  • ASTM E388-04(2015) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
  • ASTM E958-13(2021) Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
  • ASTM E958-93(2005) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers

Korean Agency for Technology and Standards (KATS), Spectral broad peak

  • KS C 2375-2006(2021) Analytical method of polychlorinated biphenyls(PCBs)by gas chromatography peak pattern comparison
  • KS C 2375-2006(2016) Analytical method of polychlorinated biphenyls(PCBs)by gas chromatography peak pattern comparison
  • KS C 2375-2006 Analytical method of polychlorinated biphenyls(PCBs)by gas chromatography peak pattern comparison

International Organization for Standardization (ISO), Spectral broad peak

  • ISO 19830:2015 Surface chemical analysis - Electron spectroscopies - Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
  • ISO/CD 6863 Preparation of Plutonium and Uranium spikes for Isotope Dilution Mass Spectrometry (IDMS)
  • ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
  • ISO 20903:2019 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results
  • ISO 20903:2011 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results

国家市场监督管理总局、中国国家标准化管理委员会, Spectral broad peak

  • GB/T 41073-2021 Surface chemical analysis—Electron spectroscopies—Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
  • GB/T 24981.1-2020 Test methods of rare earth long afterglow phosphors—Part 1: Determination of emission dominantpeak and chromaticity coordinates

British Standards Institution (BSI), Spectral broad peak

  • BS ISO 19830:2015 Surface chemical analysis. Electron spectroscopies. Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
  • BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
  • BS ISO 20903:2019 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Spectral broad peak

RU-GOST R, Spectral broad peak

  • GOST R 50005-1992 Lasers and solid-state laser heads. Measurement methods of peak local energy (power) density

Association Francaise de Normalisation, Spectral broad peak

  • NF X21-058:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Spectral broad peak

  • GB/T 28893-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Methods used to determine peak intensities and information required when reporting results
  • GB/T 24981.1-2010 Test methods of long afterglow phosphors activated by rare earths.Part 1:Determination of emission dominantpeak and chromaticity coordinates
  • GB/T 14634.2-2010 Test methods of rare earth three-band phosphors for fluorescent lamps.Part 2:Determination of emission dominantpeak and chromaticity

(U.S.) Telecommunications Industries Association , Spectral broad peak

  • TIA-492CAAB-2000 Detail Specification for Class IVa Dispersion-Unshifted Single-Mode Optical Fibers with Low Water Peak

European Telecommunications Standards Institute (ETSI), Spectral broad peak

  • ETSI TR 103 365-2016 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Time Domain Based Peak Power Measurement for UWB Devices (V1.1.1)

ETSI - European Telecommunications Standards Institute, Spectral broad peak

  • TR 103 365-2016 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Time Domain Based Peak Power Measurement for UWB Devices (V1.1.1)

International Telecommunication Union (ITU), Spectral broad peak

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Spectral broad peak

IN-BIS, Spectral broad peak





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved