ZH
RU
ES

How to use foreign standards in the country

How to use foreign standards in the country, Total:141 items.

In the international standard classification, How to use foreign standards in the country involves: Electrical accessories, Standardization. General rules, Photography, Environmental testing, Construction materials, Sports equipment and facilities, Equipment for entertainment, Thermodynamics and temperature measurements, Wood-based panels, Packaging materials and accessories, Packaging and distribution of goods in general, Wood technology processes, Lubricants, industrial oils and related products, SHIPBUILDING AND MARINE STRUCTURES, Insulating materials, Water quality, Fuels, Radiocommunications, Insulation, Rubber and plastics products, Installations in buildings, Semiconducting materials, Acoustics and acoustic measurements, Shipbuilding and marine structures in general, Transport, Applications of information technology, Electromagnetic compatibility (EMC), Measurement of time, velocity, acceleration, angular velocity, Open systems interconnection (OSI), Petroleum products in general, ELECTRICAL ENGINEERING, Road vehicle systems, Mobile services.

Korean Agency for Technology and Standards (KATS), How to use foreign standards in the country

KS C IEC 60083:2014 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
KS T 1340-2013(2018) Standard test method for burst testing of flexible package seals using internal air pressurization within restraining plates

Association Francaise de Normalisation, How to use foreign standards in the country

XP C61-442:2022 Méthode d'essai permettant de valider l'installation d'un DDR amont en série avec un DDR aval de type A, F ou B, en usage domestique ou analogue
NF C66-217*NF EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
UTE C86-614/A2U*UTE C86-614/A2:1978 ELECTRONIC COMPONENTS. BIPOLAR TRANSISTORS FOR SWITCHING APPLICATIONS. COLLECTION OF DETAIL SPECIFICATION WITHIN THE SCOPE OF THE FRENCH STANDARDS NF C 86-010 AND NF C 86-614.
UTE C86-614/A1U*UTE C86-614/A1:1978 ELECTRONIC COMPONENTS. BIPOLAR TRANSISTORS FOR SWITCHING APPLICATIONS. COLLECTION OF DETAIL SPECIFICATION WITHIN THE SCOPE OF THE FRENCH STANDARDS NF C 86-010 AND NF C 86-614.
NF EN 62217:2013 Isolateurs polymériques haute tension pour utilisation à l'intérieur ou à l'extérieur - Définitions générales, méthodes d'essai et critères d'acceptation
NF P52-612/CN:2005 Heating systems in buildings - Method for calculation of the design heat load - National addition to NF EN 12831 - Default values for calculations of clauses 6 to 9.
FD P85-210-3-2002 This document is intended for the exclusive and non collective use of AFNOR SAGAWEB.(Standards on line) customers. All network exploitation,reproduction and re-dissemination,even partial,whatever the form(hardcopy or other media), is strictly prohibited.

RU-GOST R, How to use foreign standards in the country

GOST 1.3-2008 Interstate System for Standardization. Adoption rules and methods for international and regional standards as interstate standards
GOST 8.177-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring heat conductivity of solid frames in the range of temperature 90 to 300 K
GOST 8.179-1976 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means of measurements of constant linear acceleration of a solid body in the range from 10 in minus 3 degree up to 2x10 in 2 degree m

American National Standards Institute （ANSI), How to use foreign standards in the country

ANSI IT2.40-2003 American National Standard for Photography – Root Mean Square (rms) Granularity of Film (Images on One Side Only) – Method for Measuring
BS EN 1860-3:2023 Appliances, solid fuels and firelighters for barbecuing Firelighters for igniting solid fuels for use in barbecues and grill applications. Requirements and test methods (British Standard)

The American Road & Transportation Builders Association, How to use foreign standards in the country

AASHTO T 279-2012 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel
AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester

AASHTO - American Association of State Highway and Transportation Officials, How to use foreign standards in the country

T 279-1996 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel
T 279-2018 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel
T 279-2012 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel
T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
T279-1996 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel (Twentieth Edition; ASTM D3319-90)

United States Navy, How to use foreign standards in the country

NAVY MIL-STD-1322-109-1993 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT STANDARD MR OR ER GUIDANCE SECTION IN CONTAINER MK 461 MOD 0 OR MOD 1

American Society for Testing and Materials (ASTM), How to use foreign standards in the country

ASTM D6676/D6676M-21 Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating
ASTM D7625-10 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
ASTM F3313-18 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
ASTM F3313-19 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
ASTM F3313-20 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
ASTM F2054-00(2005) Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
ASTM F2054/F2054M-13(2020) Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
ASTM D3535-07a(2021) Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
ASTM D7686-23 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
ASTM F2054-07 Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
ASTM F2054-00 Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
ASTM D7844-22 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7844-22a Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7686-19 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
ASTM F1962-05 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
ASTM F1962-05e1 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
ASTM F1620-96 Standard Practice for Calibrating a Scanning Surface Inspection System Using Monodisperse Polystyrene Latex Spheres Deposited on Polished or Epitaxial Wafer Surfaces
ASTM E1130-90(1994)e1 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index
ASTM E1130-02 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index
ASTM E1130-02e1 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index
ASTM D5997-96(2000) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D7844-20 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7844-18 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D6593-13a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-13b Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-14 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-10 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D7414-18 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7415-18 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7412-18 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectr

International Telecommunication Union (ITU), How to use foreign standards in the country

ITU-T E.212 AMD 3-2011 The international identification plan for public networks and subscriptions Amendment 3: Revised Annex E – The use of an MCC+MNC in a country other than the country to which the MCC has been assigned by the Director of TSB (Study Group 2)
ITU-R M.1582 SPANISH-2002 Method for determining coordination distances* in the 5 GHz band between the international standard microwave landing system stations operating in the aeronautical radionavigation service and stations of the radionavigation-satellite service (Earth-to-spa
ITU-R M.1582 FRENCH-2002 Method for determining coordination distances, in the 5 GHz band, between the international standard microwave landing system stations operating in the aeronautical radionavigation service and stations of the radionavigation-satellite service (Earth-to-sp
ITU-T H.248.81 AMD 2-2015 Gateway control protocol: Guidelines on the use of the international emergency preference scheme (IEPS) call indicator and priority indicator in ITU-T H.248 profiles Amendment 2: DiffServ signalling approach (Study Group 16)
ITU-T H.248.81-2011 Gateway control protocol: Guidelines on the use of the international emergency preference scheme (IEPS) call indicator and priority indicator in ITU-T H.248 profiles (Study Group 16)

British Standards Institution (BSI), How to use foreign standards in the country

BS EN 17645:2022 Domestic swimming pools. Environmental performance efficiency. Performance evaluation, methodology, and classification of the use of outdoor pools and their equipment
PD ISO/TR 26999:2012 Intelligent transport systems. Systems architecture. Use of process-oriented methodology in ITS International Standards and other deliverables
BS 6469-99-1:1992 Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN 60811. Non-electrical tests
21/30450000 DC BS EN IEC 62217. Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
23/30472671 DC BS EN IEC 62217. Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
21/30432308 DC BS EN IEC 62217. Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
19/30364698 DC BS EN IEC 62217. Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
BS 6469-99.1:1992 Insulating and sheathing materials of electric cables — Part 99: Test methods used in the United Kingdom but not specified in BS EN 60811 — Section 99.1 Non-electrical tests
BS EN ISO 4259-4:2021 Petroleum and related products. Precision of measurement methods and results - Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259-4:2021)
BS ISO 29061-1:2011 Road vehicles. Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems. Vehicles and child restraint systems equipped with ISOFIX anchorages and attachments

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use foreign standards in the country

GB/T 4897.3-2003/XG1-2009 Particleboard—Part 3:Requirements for boards for interior fiments(including furniture)for use in dry conditions
GB/T 4897.3-2003(XG1-2009) Particleboard—Part 3:Requirements for boards for interior fiments(including furniture)for use in dry conditions
GB/T 22079-2008 Polymeric insulators for indoor and out door use with a nominal voltage >1000 V. General definitions, test methods and acceptance criteria

Acoustical Society of America (ASA), How to use foreign standards in the country

ASA S12.55-2012 American National Standard Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms
ASA S12.53 PART 2-1999 American National Standard Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms

CU-NC, How to use foreign standards in the country

NC 90-00-23-1988 Standards System for Metrological Assurance. International System of Units. Information Processing., Representación of SI and other Units por Use in Systems with Limited Character Sets

German Institute for Standardization, How to use foreign standards in the country

DIN 38406-17:2009-10 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 17: Determination of uranium - Method using adsorptive stripping voltammetry in surface water, raw water and drinking water (E 17)
DIN 38412-14:1983-09 German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of oxygen production by means of the light and dark bottle method under laboratory conditions (SPL) (L 14) (determ...
DIN 38409-44:1992 German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of the chemical oxygen demand (COD), ranging from 5 to 50 mg/l (H 44)
DIN EN 302454-1:2016 Meteorological Aids (Met Aids) - Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range - Part 1: Technical characteristics and test methods (Endorsement of the English version EN 302 454-1 V1.2.1 (2015-10) as German standard)
DIN 38413-6:2007 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 6: Determination of acrylamide - Methode using high performance liquid chromatography with mass spectrometric detection (HPLC-MS/MS) (P 6)
DIN 38406-18:1990-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of dissolved silver by atomic absorption spectrometry using electrothermal atomization (E 18)
DIN 38402-51:1986 German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to determine the performance characteris
DIN 38406-8:2004-10 German standard methods for examination of water, waste water and sludge - Cations (group E) - Part 8: Determination of zinc - Method by atomic absorption spectrometry (AAS) using an air-ethine flame (E 8)
DIN 38404-3:2005 German standard methods for the examination of water, waste water and sludge - Physical and physicochemical parameters (group C) - Part 3: Determination of spectral absorption in the UV range, Spectral absorptions coefficient (C 3)
DIN EN 300698-1:2010 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways - Part 1: Technical characteristics and methods of measurement
DIN EN 302454:2017 Meteorological Aids (Met Aids) - Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (Endorsement of the English version EN 302 454 V2.1.1
DIN EN 302454:2018 Meteorological Aids (Met Aids) - Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range - Harmonised Standard for access to radio spectrum (Endorsement of the English version EN 302 454 V2.2.1 (2018-08) as a German standard)
DIN 38407-39:2011 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 39: Determination of selected polycyclic aromatic hydrocarbons (PAH) - Method using gas chromatography with mass spectrometric
DIN 38409-41:1980 German Standard Methods for Examination of Water, Waste Water and Sludge; Summary Action and Material Characteristic Parameters (Group H); Determination of the Chemical Oxygen Demand (COD) in the Range over 15 mg/l (H41)
DIN EN 302054-1:2016 Meteorological Aids (Met Aids) - Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW - Part 1: Technical characteristics and test methods (Endorsement of the English version EN 302 054-1 V1.2.1 (2015-
DIN EN 300224:2017 Land Mobile Service - Radio Equipment for use in a Paging Service operating within the frequency range 25 MHz - 470 MHz - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (Endorsement of the English version EN
DIN 38415-4:1999-12 German standard methods for the examination of water, waste water and sludge - Sub-animal testing (group T) - Part 4: Determination of the genotoxic potential using the Salmonella microsome test (Ames Test) (T 4)
DIN 38404-3:2005-07 German standard methods for the examination of water, waste water and sludge - Physical and physical-chemical parameters (group C) - Part 3: Determination of absorption in the range of the ultraviolet radiation, Spectral absorptions coefficient (C 3)
DIN 38412-11:1982 German standard methods for the examination of water, waste water and sludge; Test methods using water organisms (group L); Determination of the effect on microcrustacea of substances contained in water (Daphnia short-time test) (L 11)
DIN EN 300698:2018 Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways - Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU (Endorsement of the
DIN SPEC 38402-100:2017-08 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 100: Testing for threshold violation, taking into account the measurement uncertainty using statistical and empirical methods (A 100)
DIN 38413-6:2007-02 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 6: Determination of acrylamide - Methode using high performance liquid chromatography with mass spectrometric detection (HPLC-MS/MS) (P 6)
DIN 38412-13:1983-09 German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of oxygen production and oxygen consumption in an aquatic environment (SPG and SVG) by means of the light and dark...
DIN EN 303204:2021 Fixed Short Range Devices (SRD) in data networks - Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW e.r.p. - Harmonised Standard for access to the radio spectrum (Endorsement of the English versio
DIN EN 302454-2:2016 Meteorological Aids (Met Aids) - Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range - Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU (Endorsement of the English version EN 302
DIN 38415-4:1999 German standard methods for the examination of water, waste water and sludge - Sub-animal testing (group T) - Part 4: Determination of the genotoxic potential using the Salmonella microsome test (Ames Test) (T 4)
DIN 38414-14:2011-08 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 14: Determination of selected polyfluorinated compounds (PFC) in sludge, compost and soil - Method using high performance liquid chroma...
DIN 38415-3:1996-12 German standard methods for the examination of water, waste water and sludge - Sub-animal testing (group T) - Part 3: Determination of the genotype potential of water and waste water components with the umu-test (T 3)
DIN EN 301925:2021 Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands - Technical characteristics and methods of measurement (Endorsement of the English version EN 301 925 V1.6.1 (2020-12) as a German standard)
DIN 38414-14:2011 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 14: Determination of selected polyfluorinated compounds (PFC) in sludge, compost and soil - Method using high performance liquid chromatog
DIN EN ISO 4259-4:2022-09 Petroleum and related products - Precision of measurement methods and results - Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259-4:2021)...
DIN EN 302054:2017 Meteorological Aids (Met Aids) - Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (Endorsement of th
DIN EN 303417:2017 Wireless power transmission systems, using technologies other than radio frequency beam in the 19 - 21 kHz, 59 - 61 kHz, 79 - 90 kHz, 100 - 300 kHz, 6 765 - 6 795 kHz ranges - Harmonised Standard covering the essential requirements of article 3.2 of Direc
DIN EN 301925:2018 Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands - Technical characteristics and methods of measurement (Endorsement of the English version EN 301 925 V1.5.1 (2017-10) as German standard)
DIN EN 305550-1:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Radio equipment to be used in the 40 GHz to 246 GHz frequency range - Part 1: Technical characteristics and test methods (Endorsement of the English version EN 30
DIN EN 305550-1:2011 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Radio equipment to be used in the 40 GHz to 246 GHz frequency range - Part 1: Technical characteristics and test methods (Endorsement of the English version EN 30
DIN EN 302054-2:2016 Meteorological Aids (Met Aids) - Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW - Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU (Endor
DIN EN 301688:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Technical characteristics and methods of measurement for fixed and portable VHF equipment operating on 121,5 MHz and 123,1 MHz (Endorsement of the English version EN 301688 V 1.1.1 (2000-07)
DIN 38407-22:2001 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 22: Determination of Glyphosate and Aminomethyl phosphic acid (AMPA) by high performance liquid chromatography (HPLC), post-col

IX-EU/EC, How to use foreign standards in the country

COM(94) 73-1994 Proposal for a Council Directive Concerning the Enforcement, in Respect of Shipping Using Community Ports and Sailing in the Waters under the Jurisdiction of the Member States, of International Standards for Ship Safety, Pollution Prevention and Shipboard
2008/C 90/08-2008 Commission communication in the framework of the implementation of the Directive 94/9/EC of the European Parliament and of the Council on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in po
2008/C 321/01-2008 NOTICES FROM MEMBER STATES Commission communication in the framework of the implementation of the Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to con
2007/C 300/10-2007 Commission communication in the framework of the implementation of the Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended
COMMUN/73/23-1973 Commission Communication Within the Framework of Council Directive 73/23/EEC of 19 February 1973 on the Harmonization of the Laws of the Member States Relating to Electrical Equipment Designed for Use within Certain Voltage Limits (for Related Standard Se
98/C 374/07-1998 Proposal for a Council Decision on the Positon of the European Community on the Draft Regulation of the United Nations Economic Commission for Europe Concerning the Approval of Specific Components of Motor Vehicles Using Compressed Natural Gas (CNG) in Th

VE-FONDONORMA, How to use foreign standards in the country

CZ-CSN, How to use foreign standards in the country

CSN 85 6209 Za-1987

Institute of Electrical and Electronics Engineers (IEEE), How to use foreign standards in the country

62704-4/D4, 2020 IEC/IEEE International Approved Draft Standard - Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: Part 4: General Requirements for Using the finite element method (
IEEE 62704-4/D4, 2020 IEC/IEEE International Approved Draft Standard - Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: Part 4: General Requirements for Using the finite element method (
IEEE/ISO/IEC 14515-2-2003 ISO/IEC International Standard for Information technology--Portable Operating System Interface (POSIX)--Test methods for measuring conformance to POSIX--Part 2:Shell and utilities
IEC/IEEE P62704-4/D3, September 2019 IEC/IEEE International Draft Standard - Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: Part 4: General Requirements for Using the finite element method (FEM) for
IEC/IEEE P62704-4/D2, August 2019 IEC/IEEE International Draft Standard - Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: Part 4: General Requirements for Using the finite element method (FEM) for
IEC/IEEE P62704-4/D1, March 2019 IEC/IEEE Draft International Standard - Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: General Requirements for Using the Finite Element Method (FEM) for SAR Calc
IEEE/IEC 62704-4-2020 IEC/IEEE International Standard - Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communication devices, 30 MHz to 6 GHz ¿¿¿ Part 4: General requirements for using the finite element method for SAR calcu

Conference of European Post Telecommunication (CEPT), How to use foreign standards in the country

CEPT ERC/DEC/(95)02-1995 ERC Decision of 1st December 1995 on the Adoption of National Type Approval Regulations for Equipment to be Used in the Land Mobile Service Using Angle Modulation Based on the European Telecommunications Standard (ETS) 300 086

International Organization for Standardization (ISO), How to use foreign standards in the country

ISO/TR 26999:2012 Intelligent transport systems - Systems architecture - Use of process-oriented methodology in ITS International Standards and other deliverables
ISO/IEC ISP 10613-20:1998 Information technology - International standardized profile RA - Relaying the connectionless-mode network service - Part 20: Security employing the network layer security protocol - Connection-mode, with SDT-PDU based protection over X.25 packet switched
ISO/IEC ISP 10613-15:1995 Information technology - International standardized profile RA - Relaying the connectionless-mode network service - Part 15: Definition of profile RA53.1111, relaying the connectionless-mode network service between token ring LAN subnetworks and PSDNs usi
ISO/IEC ISP 10613-17:1995 Information technology - International standardized profile RA - Relaying the connectionless-mode network service - Part 17: Definition of profile RA54.1111, relaying the connectionless-mode network service between FDDI LAN subnetworks and PSDNs using vir
ISO/IEC ISP 10609-15:1996 Information technology - International standardized profiles TB, TC, TD and TE - Connection-mode transport service over connection-mode network service - Part 15: Definition of profile TC54, provision of the OSI connection-mode transport service using the
ISO/IEC ISP 10609-14:1994 Information technology - International standardized profiles TB, TC, TD and TE - Connection-mode transport service over connection-mode network service - Part 14: Definition of profile TC53, provision of the OSI connection-mode transport service using the
ISO/IEC ISP 10609-12:1994 Information technology - International standardized profiles TB, TC, TD and TE - Connection-mode transport service over connection-mode network service - Part 12: Definition of profile TC51, provision of the OSI connection-mode transport service using the
ISO/IEC ISP 10613-18:1995 Information technology - International standardized profile RA - Relaying the connectionless-mode network service - Part 18: Definition of profile RA54.1121, relaying the connectionless-mode network service between FDDI LAN subnetworks and PSDNs using vir
ISO/IEC ISP 10613-16:1995 Information technology - International standardized profile RA - Relaying the connectionless-mode network service - Part 16: Definition of profile RA53.1121, relaying the connectionless-mode network service between token ring LAN subnetworks and PSDNs usi

ES-AENOR, How to use foreign standards in the country

UNE-EN 20090-2:1994 Light gauge metal containers. Definitions and determination methods for dimensions and capacities. Part 2: General use containers. (ISO 90-2:1986)

Canadian Standards Association (CSA), How to use foreign standards in the country

CSA ISO/IEC ISP 10613-20-01:2001 Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 20: Security Employing the Network Layer Security Protocol - Connection-Mode with SDT-PDU Based Protection over X.25 Packet Swtiched

ES-UNE, How to use foreign standards in the country

UNE-EN ISO 4259-4:2023 Petroleum and related products - Precision of measurement methods and results - Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259-4:2021)