ZH
RU
ES

Material viscosity value

Material viscosity value, Total:495 items.

In the international standard classification, Material viscosity value involves: Plastics, Measurement of volume, mass, density, viscosity, Construction materials, Testing of metals, Inorganic chemicals, Paint ingredients, Wood, sawlogs and sawn timber, Adhesives, Measurement of force, weight and pressure, Paints and varnishes, Road engineering, Road vehicle systems, Seals, glands, Pipeline components and pipelines, Protection against fire, Fuels, Wood-based panels, Cutting tools, Crude petroleum, Footwear, Dentistry, Rubber and plastics products, Refractories, Rubber, Paper and board, Products of the textile industry, Fertilizers, Insulating materials, Electricity. Magnetism. Electrical and magnetic measurements, Products of the chemical industry, Lubricants, industrial oils and related products, Reinforced plastics, Ceramics, Non-ferrous metals, Textile fibres, Pulps, Sterilization and disinfection, Elements of buildings, Electrical accessories, Waxes, bituminous materials and other petroleum products, Photography, Medical equipment, Analytical chemistry, Chipless working equipment, Materials for aerospace construction, Welding, brazing and soldering, Cellular materials, Wood technology processes, Mechanical testing, Protection against crime.

International Organization for Standardization (ISO), Material viscosity value

ISO 1628-4:1986 Plastics; Determination of viscosity number and limiting viscosity number; Part 4 : Polycarbonate (PC) moulding and extrusion materials
ISO 307:2003 Plastics - Polyamides - Determination of viscosity number
ISO 307:2007 Plastics - Polyamides - Determination of viscosity number
ISO 307:1984 Plastics; Polyamides; Determination of viscosity number
ISO 307:1994 Plastics - Polyamides - Determination of viscosity number
ISO 1628-3:1991 Plastics; determination of vicosity number and limiting viscosity number; part 3: polyethylenes and polypropylenes
ISO 1191:1975 Plastics — Polyethylenes and polypropylenes in dilute solution — Determination of viscosity number and of limiting viscosity number
ISO 1157:1975 Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio
ISO 1628-5:1986 Plastics; Determination of viscosity number and limiting viscosity number; Part 5 : Poly(alkylene terephthalates)
ISO 1157:1990 Plastics; cellulose acetate in dilute solution; determination of viscosity number and viscosity ratio
ISO 18265:2013 Metallic materials.Conversion of hardness values
ISO 18265:2003 Metallic materials - Conversion of hardness values
ISO 307:1977 Plastics — Determination of viscosity number of polyamides in dilute solution
ISO/R 409:1964 Tables of Vickers hardness values (HV) for metallic materials
ISO 4545-4:2005 Metallic materials — Knoop hardness test — Part 4: Table of hardness values
ISO 4545-4:2017 Metallic materials - Knoop hardness test - Part 4: Table of hardness values
ISO 4587:2003 Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 6507-4:2005 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
ISO 6506-4:2014 Metallic materials - Brinell hardness test - Part 4: Table of hardness values
ISO 6506-4:2005 Metallic materials — Brinell hardness testPart 4:Table of hardness values
ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
ISO 10250:1994 Metallic materials - Hardness testing - Tables of Knoop hardness values for use in tests made on flat surfaces
ISO 3990:2023 Dentistry — Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials
ISO 6133:1981 Rubber and plastics; Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 1228:1975 Plastics — Poly(ethylene terephthalate) in dilute solution — Determination of viscosity number
ISO 1628-1:1984 Guidelines for the standardization of methods for the determination of viscosity number and limiting viscosity number of polymers in dilute solution; Part 1 : General conditions
ISO 5600:2007 Rubber - Determination of adhesion to rigid materials using conical shaped parts
ISO 5600:1986 Rubber; Determination of adhesion to rigid materials using conical shaped parts
ISO 19821:2017 Determination of span rating for natural fibre-reinforced plastic composite (NFC) deck boards
ISO 13229:2010 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value
ISO 1628-4:1999 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 4: Polycarbonate (PC) moulding and extrusion materials
ISO 15880:2000 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders
ISO 410:1982 Metallic materials; Hardness test; Tables of Brinell hardness values for use in tests made on flat surfaces
ISO 5351:2004 Pulps - Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
ISO 8003:1985 Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Measurement of dynamic viscosity
ISO 1233:1975 Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution
ISO 6238:2001 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading
ISO 6237:2003 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by tensile loading
ISO 6237:1987 Adhesives; Wood-to-wood adhesive bonds; Determination of shear strength by tensile loading
ISO 6238:1987 Adhesives; Wood-to-wood adhesive bonds; Determination of shear strength by compression loading
ISO 6237:2017 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by tensile loading
ISO 6238:2018 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading
ISO 409-1:1982 Metallic materials; Hardness test; Tables of Vickers hardness values for use in tests made on flat surfaces; Part 1 : HV 5 to HV 100
ISO 18932:2005 Imaging materials - Adhesive mounting systems - Specifications
ISO 5351:2010 Pulps - Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value
ISO 307:2007/Amd 1:2013 Plastics - Polyamides - Determination of viscosity number - Amendment 1: Corrections, and update to reference to JIS K 6920-2
ISO 5600:2011 Rubber - Determination of adhesion to rigid materials using conical shaped parts
ISO 5600:2017 Rubber - Determination of adhesion to rigid materials using conical shaped parts
ISO 3386-1:1979 Flexible cellular materials — Determination of compression stress/strain characteristic and compression stress value — Part 1: Low density materials
ISO 15509:2001 Adhesives - Determination of the bond strength of engineering-plastic joints

Association Francaise de Normalisation, Material viscosity value

NF T51-551:1987 Plastics. Determination of viscosity number and limiting viscosity number. Part 4 : polycarbonate (pc) moulding and extrusion materials.
NF T51-173:2007 Plastics - Polyamides - Determination of viscosity number.
NF T51-542:1987 Plastics. Determination of viscosity number and limiting viscosity number. Part 5 : poly(akylene terephtalates).
NF A03-172*NF EN ISO 18265:2013 Metallic materials - Conversion of hardness values
NF T51-810*NF ISO 1628-6:1993 Plastics. Determination of viscosity number and limiting viscosity number. Part 6 : methyl methacrylate polymers.
NF A03-154-4:2006 Metallic materials - Vickers hardness test - Part 4 : tables of hardness values.
NF A03-152-4:2006 Metallic materials - Brinell hardness test - Part 4 : table of hardness values.
NF A03-150-4:2006 Metallic materials - Knoop hardness test - Part 4 : tables of hardness values.
NF A03-152-4*NF EN ISO 6506-4:2014 Metallic materials - Brinell hardness test - Part 4 : table of hardness values
NF A03-150-4*NF EN ISO 4545-4:2018 Metallic materials - Knoop hardness test - Part 4 : table of hardness values
NF A03-154-4*NF EN ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4 : tables of hardness values
NF T76-331*NF EN 12964:2001 Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature
NF U44-173:2009 Fertilizers - Liming materials, liming materials-fertilizers and fertilizers - Determination of neutralizing value.
NF T51-511*NF EN ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value
NF T76-307*NF EN 1392:2006 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specific conditions
NF T30-097*NF EN ISO 15880:2004 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders
NF T76-333:2007 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements.
NF P14-204-8*NF EN 13892-8:2003 Methods of test for screed materials - Part 8 : determination of bond strength.
NF T76-333*NF EN 15307:2015 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
NF T20-172*NF ISO 8003:1986 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Measurement of dynamic viscosity.
NF B49-416:1969 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of phosphorus.
NF B49-413:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of iron.
NF B49-412:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of aluminium.
NF B49-411:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of silicon (method by insolubilisation in hydrochloric acid medium).
NF B49-414:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of titanium.
NF B49-415:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of manganese.
NF P98-846-46*NF EN 13286-46:2003 Unbound and hydraulically bound mixtures - Part 46 : test method for the determination of the moisture condition value
NF EN 13892-8:2003 Méthodes d'essai des matériaux pour chapes - Partie 8 : détermination de la force d'adhérence
NF B49-417:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of calcium and magnesium.
NF T66-020:1984 Asphalt binders. Bituminous emulsions. Determination of pseudoviscosity.
NF T76-152-1*NF EN 302-1:2013 Adhesives for load-bearing timber structures - Test methods - Part 1: determination of longitudinal tensile shear strength
NF T51-439-1*NF EN ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1 : inclined-tube method
NF EN ISO 12058-1:2018 Plastiques - Détermination de la viscosité au moyen d'un viscosimètre à chute de bille - Partie 1 : méthode du tube incliné
NF T66-066:2004 Hydrocarbon binders - Determination of acid number of bitumen - Potentiometric method.
NF T54-019:1995 Plastics piping and ducting systems. Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U). Specimen preparation for determination of the viscosity number and calculation of the K-value.
NF T30-029:1980 Paints. Method of use a rotational viscosimeter for measuring the apparent dynamic viscosity of varnishes, paints and similar preparations.
NF P75-427:2003 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material.
NF P75-427*NF EN 13494:2019 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
NF T51-439-1:2004 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1 : inclined-tube method.

European Committee for Standardization (CEN), Material viscosity value

EN ISO 307:1997 Plastics - Polyamides - Determination of Viscosity Number ISO 307: 1994
EN ISO 307:2003 Plastics - Polyamides - Determination of viscosity number ISO 307: 2003
EN ISO 307:2019 Plastics - Polyamides - Determination of viscosity number (ISO 307:2019)
EN ISO 307:2007 Plastics - Polyamides - Determination of viscosity number (ISO 307:2007)
EN ISO 1157:1999 Plastics - Cellulose Acetate in Dilute Solution - Determination of Viscosity Number and Viscosity Ratio ISO 1157: 1990
EN ISO 18265:2013 Metallic materials - Conversion of hardness values (ISO 18265:2013)
EN ISO 307:2007/A1:2013 Plastics - Polyamides - Determination of viscosity number - Amendment 1: Corrections, and update to reference to JIS K 6920-2 (ISO 307:2007/Amd 1:2013)
EN ISO 18265:2003 Metallic materials Conversion of hardness values ISO 18265:2003
EN ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
EN ISO 4545-4:2018 Metallic materials - Knoop hardness test - Part 4: Table of hardness values
EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
EN ISO 6507-4:2005 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values (ISO 6507-4:2005)
prEN 922-1992 Plastics piping and ducting systems; pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U); determination of the viscosity number and K-value
EN ISO 4545-4:2005 Metallic materials - Knoop hardness test - Part 4: Table of hardness values
EN ISO 3990:2023 Dentistry - Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials (ISO 3990:2023)
EN ISO 6506-4:2014 Metallic materials - Brinell hardness test - Part 4: Table of hardness values
EN ISO 6506-4:2005 Metallic materials - Brinell hardness test - Part 4: Table of hardness values ISO 6506-4:2005
EN 12964:2001 Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature
EN 13494:2002 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
EN 13892-8:2002 Methods of test for screed materials - Part 8: Determination of bond strength
EN 13286-46:2003 Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value
EN 13286-46-2003E Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value
EN 1719:1998 Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack
CEN EN 13494-2002 Thermal insulation products for building applications Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
EN ISO 15880:2004 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders
EN ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
EN 1628:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
EN 1628:2021 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading

British Standards Institution (BSI), Material viscosity value

BS EN ISO 307:2007 Plastics - Polyamides - Determination of viscosity number
BS EN ISO 307:2007+A1:2013 Plastics - Polyamides - Determination of viscosity number
BS EN ISO 18265:2003 Metallic materials - Conversion of hardness values
BS EN ISO 18265:2013 Metallic materials. Conversion of hardness values
BS EN ISO 6506-4:2005 Metallic materials - Brinell hardness test - Table of hardness values
BS EN ISO 4545-4:2006 Metallic materials - Knoop hardness test - Tables of hardness values
BS EN ISO 6506-4:2014 Metallic materials. Brinell hardness test. Table of hardness values
BS EN ISO 1628-1:1998 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - General principles
BS EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Tables of hardness values
BS EN ISO 1628-2:2000 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Poly(vinyl chloride) resins
BS EN ISO 1628-3:1991 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Polyethylenes and polypropylenes
BS EN ISO 6507-4:2018 Tracked Changes. Metallic materials. Vickers hardness test. Tables of hardness values
BS EN ISO 4545-4:2018 Tracked Changes. Metallic materials. Knoop hardness test. Table of hardness values
BS EN 13286-46:2003 Unbound and hydraulically bound mixtures - Test method for the determination of the moisture condition value
BS EN ISO 15880:2001 Paints, varnishes and binders. Determination of MEQ value of water-based coating materials and binders
BS EN 1058:1996 Wood-based panels - Determination of characteristic values of mechanical properties and density
BS 6782-17:2001 Binders for paints - Determination of MEQ value of water-dilutable binders
BS EN 15307:2007 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
BS EN 15307:2014 Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements
BS EN ISO 12058-1:1997 Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
BS EN ISO 12058-1:2002 Plastics - 12058-1:2002) Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
BS EN ISO 12058-1:2018 Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
BS EN 13892-8:2002 Methods of test for screed materials - Determination of bond strength
BS EN ISO 11339:2010 Adhesives - T-peel test for flexible-to-flexible bonded assemblies
BS ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS EN 522:1998 Adhesives for leather and footwear materials - Bond strength - Minimum requirements and adhesive classification
BS EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
BS EN ISO 3682:1996 Binders for paints and varnishes - Determination of acid value - Titrimetric method
BS EN ISO 15880:2004 Paints, varnishes and binders. Determination of MEQ value of water-based coating materials and binders
BS 2782-3-Method 323G:1997 Methods of testing plastics. Rheological properties. Determination of viscosity number of polyamides
BS 2782 Pt.7 Method 733A:1991 Methods of testing plastics. Rheological properties. Determination of viscosity number of polyamides
BS 2782-7 Method 732B:1991 Methods of testing plastics - Rheological properties - Determination of viscosity number of poly(vinyl chloride) resins
BS ISO 6237:2003 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by tensile loading
BS ISO 15509:2001 Adhesives - Determination of the bond strength of engineering-plastic joints
BS EN ISO 3681:1996 Binders for paints and varnishes. Determination of saponification value. Titrimetric method
BS ISO 5351:2007 Pulps - Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
BS ISO 5351:2010 Pulps - Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
PD ISO/TS 21236-1:2019 Nanotechnologies. Clay nanomaterials. Specification of characteristics and measurement methods for layered clay nanomaterials
BS EN 2781:1998 Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness
BS ISO 6238:2018 Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by compressive loading
BS EN 13494:2002 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
BS EN 13494:2019 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material

Japanese Industrial Standards Committee (JISC), Material viscosity value

JIS K 6933:1999 Plastics -- Polyamides -- Determination of viscosity number
JIS K 6933:2013 Plastics.Polyamides.Determination of viscosity number
JIS K 7367-3:1999 Plastics -- Determination of viscosity number and limiting viscosity number -- Part 3: Polyethylenes and polypropylenes
JIS K 6854-3:1999 Adhesives -- Determination of peel strength of bonded assemblies -- Part 3: Adhesives -- 180 degree SIGN peel test for flexible-to-flexible bonded assemblies (T-peel test)
JIS R 2573:1991 Testing method for refractoriness of fireclay plastic refractories
JIS K 6274:2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS K 6274:2018 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS R 6001:1998 Bonded abrasive grain sizes
JIS R 2561:1995 High alumina and fire clay plastic refractories

German Institute for Standardization, Material viscosity value

DIN EN ISO 307:2019-11 Plastics - Polyamides - Determination of viscosity number (ISO 307:2019); German version EN ISO 307:2019
DIN 51922:1983 Testing of carbon materials; determination of ash value; binding and impregnating materials
DIN 51922:2016 Testing of carbonaceous materials - Determination of ash value - Binding and impregnating materials
DIN 51905:2014 Testing of carbonaceous materials - Determination of coking value - Binding and impregnating materials
DIN 51922:2016-08 Testing of carbonaceous materials - Determination of ash value - Binding and impregnating materials
DIN 51905:2014-09 Testing of carbonaceous materials - Determination of coking value - Binding and impregnating materials
DIN EN ISO 307:2007 Plastics - Polyamides - Determination of viscosity number (ISO 307:2007); English version of DIN EN ISO 307:2007-08
DIN 51905:1981 Testing of carbon materials; determination of coking value; binding and impregnating materials
DIN EN ISO 18265:2014-02 Metallic materials - Conversion of hardness values (ISO 18265:2013); German version EN ISO 18265:2013
DIN 50150:2000 Testing of metallic materials - Conversion of hardness values
DIN EN ISO 6507-4:2018-07 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018); German version EN ISO 6507-4:2018
DIN EN ISO 6506-4:2015-02 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2014); German version EN ISO 6506-4:2014
DIN EN ISO 4545-4:2018-05 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017); German version EN ISO 4545-4:2018
DIN 51562-4:1999 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscometer calibration and determination of the uncertainty of measurement
DIN 51907:2013-12 Testing of carbonaceous materials - Determination of density with liquid pycnometer - Binding and impregnating materials
DIN EN 15307:2007 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements; English version of DIN EN 15307:2007-08
DIN EN 15307:2015-04 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements; German version EN 15307:2014
DIN 53229:1989 Paints, varnishes and similar coating materials; determination of viscosity at high shear rates using rotational viscometers
DIN/TS 54464:2021 Adhesives - Determination of tensile lap-shear strength of bonded assemblies with composite and metal adherends
DIN 65142:1989-11 Aerospace; preimpregnated fibre sheet and tape (prepreg); determination of bond strength
DIN 53366:2007-10 Testing of plastic films and sheetings - Determination of blocking strength
DIN 51907:2013 Testing of carbonaceous materials - Determination of density with liquid pycnometer - Binding and impregnating materials
DIN EN 13892-8:2003 Methods of test for screed materials - Part 8: Determination of bond strength; German version EN 13892-8:2002
DIN EN ISO 15880:2004-09 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000); German version EN ISO 15880:2004
DIN EN 12964:2001-07 Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature; German version EN 12964:2001
DIN 51563:2011-04 Testing of Mineral Oils and Related Materials - Determination of Viscosity Temperature Relation - Slope m
DIN EN ISO 15880:2004 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000); German version EN ISO 15880:2004
DIN EN 13286-46:2003 Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value; German version EN 13286-46:2003
DIN 51920:2012 Testing of carbonaceous materials.Determination of the Mettler softening point.Binding and impregnating materials
DIN 51920:1984 Testing of carbon materials; determination of the Mettler softening point; binding and impregnating materials
DIN EN ISO 18265:2014 Metallic materials - Conversion of hardness values (ISO 18265:2013); German version EN ISO 18265:2013
DIN EN ISO 307:2013 Plastics - Polyamides - Determination of viscosity number (ISO 307:2007 + Amd 1:2013); German version EN ISO 307:2007 + A1:2013
DIN 51926:2009 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN 51926:2016 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN EN 1719:1998 Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack; German version EN 1719:1998
DIN EN ISO 12058-1:2018-11 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:2018); German version EN ISO 12058-1:2018
DIN 1324-2:1988 Electromagnetic field; material quantities
DIN 51926:2016-08 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN EN ISO 2114 Berichtigung 1:2006 Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000); German version EN ISO 2114:2000, Corrigenda to DIN EN ISO 2114:2002-06; German version EN ISO 2114:2000/AC:2005
DIN EN 13892-8:2003-02 Methods of test for screed materials - Part 8: Determination of bond strength; German version EN 13892-8:2002
DIN EN 13494:2019 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
DIN EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010); German version EN ISO 13229:2011

ES-UNE, Material viscosity value

UNE-EN ISO 307:2020 Plastics - Polyamides - Determination of viscosity number (ISO 307:2019)
UNE-EN ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018)
UNE-EN ISO 4545-4:2018 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017)
UNE-EN ISO 12058-1:2019 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:2018)
UNE-EN 13494:2020 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material

CL-INN, Material viscosity value

INDITECNOR 22-8

Danish Standards Foundation, Material viscosity value

DS/EN ISO 18265:2013 Metallic materials - Conversion of hardness values
DS/INSTA 215:1990 Plastic pipes. Extraction of PVC-resin an determination of relative visosity, viscosity number and K-value
DS/EN ISO 6506-4:2006 Metallic materials - Brinell hardness test - Part 4: Table of hardness values
DS/EN ISO 4545-4:2006 Metallic materials - Knoop hardness test - Part 4: Table of hardness values
DS/EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
DS/EN 15307:2007 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
DS/ISO 6133:1981 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
DS/EN ISO 15880:2004 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders
DS/EN 12964:2001 Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature
DS/EN 13892-8:2003 Methods of test for screed materials - Part 8: Determination of bond strength
DS/EN 1392:2006 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions
DS/EN 60450:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
DS/EN ISO 12058-1/AC:2004 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
DS/EN ISO 12058-1:2002 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
DS/EN 13494:2003 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material

Korean Agency for Technology and Standards (KATS), Material viscosity value

KS M ISO 15880:2007 Paints, varnishes and binders－Determination of MEQ value of water-based coating materials and binders
KS M ISO 1628-1:2012 Plastics－Determination of the viscosity of polymers in dilute solution using capillary viscometers－Part 1：General principles
KS R 1070-2003 SHEAR STRENGTH TEST PROCEDURE FOR BRAKE SHOE ASSEMBLY AND PAD
KS M ISO 2114:2010 Plastics(polyester resins) and paints and varnishes(binders)－Determination of partial acid value and total acid value
KS M ISO 15880:2022 Paints, varnishes and binders — Determination of MEQ value of water-based coating materials and binders
KS M ISO 15880:2017 Paints, varnishes and binders－Determination of MEQ value of water-based coating materials and binders
KS K 0741-2021 Standard test method for determining the bond strength of geocomposites
KS L 5205-2019 ALUMINA CEMENTS FOR REFRACTORIES
KS M ISO 12058-1-2006(2021) Plastics?Determination of viscosity using a falling-ball viscometer－Part 1：Inclined-tube method
KS M ISO 12058-1-2006(2016) Plastics?Determination of viscosity using a falling-ball viscometer－Part 1：Inclined-tube method
KS M ISO 8003:2003 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Measurement of dynamic viscosity
KS M ISO 8003:2013 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Measurement of dynamic viscosity
KS M ISO 8003-2003(2008) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Measurement of dynamic viscosity
KS M ISO 6237-2013(2018) Adhesives — Wood-to-wood adhesive bonds–Determination of shear strength by tensile loading
KS B ISO 10250-2003(2018)
KS M ISO 3681:2007 Binders for paints and varnishes－Determination of saponification value－Titrimetric method
KS M ISO 3681:2017 Binders for paints and varnishes－Determination of saponification value－Titrimetric method
KS M ISO 12058-1:2022 Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
KS M ISO 5351:2006 Pulps-Determination of limiting viscosity number in cupri-ethylenediamine(CED) solution
KS M ISO 5351:2014 Pulps — Determination of limiting viscosity number in cupriethylenediamine(CED) solution
KS L 6513-2001(2011) Testing methods for bonded abrasive grain size
KS M ISO 12058-1:2006 Plastics ? Determination of viscosity using a falling-ball viscometer－Part 1：Inclined-tube method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Material viscosity value

GB/T 33362-2016 Metallic materials—Conversion of hardness values
GB/T 33334-2016 Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies(composite and composite)
GB/T 1548-2016 Pulps—Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution

Standard Association of Australia （SAA）, Material viscosity value

AS 5016:2004 Metallic materials - Conversion of hardness values
AS 1816.4:2007 Metallic materials - Brinell hardness test - Table of hardness values
AS/NZS 1580.214.6:1995 Paints and related materials - Methods of test - Consistency - ISO flow cups
AS/NZS 1580.214.1:1997 Paints and related materials - Methods of test - Consistency - Stormer viscometer
AS/NZS 1580.214.5:1997 Paints and related materials - Methods of test - Consistency - Rotational viscometer
AS 1580.214.3:2003(R2013)
AS/NZS 1580.214.2:1996 Paints and related materials - Methods of test - Consistency - Flow cup
AS 1180.4A:1972 Methods of test for hose made from elastomeric materials - Ply adhesion - Dead weight method

IT-UNI, Material viscosity value

ZA-SANS, Material viscosity value

SANS 6034:2005 pH Value of wood adhesives
SANS 6507-4:2008 Metallic materials - Vickers hardness test Part 4: Tables of hardness values
SANS 6506-4:2008 Metallic materials - Brinell hardness test Part 4: Table of hardness values
SANS 5126:1975 Viscosity of binders for paints
SANS 5126:2008 Viscosity of binders for paints
SANS 6246:2006 Treton impact value of aggregates
SANS 10183-4-6:2010 Adhesives for wood Part 4-6: Test methods - Determination of pH
SANS 6019:2004 Surface bond strength of particle boards

American Society for Testing and Materials (ASTM), Material viscosity value

ASTM D5478-98 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D5478-98(2003) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D5478-09 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D5478-13(2022) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D5478-13 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D5478-13(2018) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D3236-88(2004) Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
ASTM D3236-88(1999) Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
ASTM D3236-88(2014) Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
ASTM D3236-88(2009) Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
ASTM D3236-15 Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
ASTM D952-10 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM D952-15 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM F904-98 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM F904-98(2003) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM D952-95 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM D952-02 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM D4796-88(2004) Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
ASTM D4796-88(1998) Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
ASTM D7105/D7105M-06(2019)e1 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
ASTM F904-98(2008) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM E102/E102M-93(2009) Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
ASTM D2883-95(2000)e1 Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials
ASTM D2883-95 Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials
ASTM D1480-21 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D5125-10(2014) Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM D4796-10 Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
ASTM E102/E102M-93(2021) Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
ASTM F904-22 Standard Practice for Separation of Plies for Bond Strength of Laminated Flexible Materials
ASTM D4796-17(2022) Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
ASTM D4796-17 Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
ASTM E102/E102M-93(2016) Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
ASTM D5125-97 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM D5125-97(2005) Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM D952-15(2021) Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM D2976-71(2004) Standard Test Method for pH of Peat Materials
ASTM D2976-71(1998) Standard Test Method for pH of Peat Materials
ASTM D8162-20 Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
ASTM D8162-20a Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
ASTM D5125-10(2020)e1 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups

BR-ABNT, Material viscosity value

RU-GOST R, Material viscosity value

GOST 9070-1975 Viscosimeters for determination of relative viscosity of paint and lacquer materials. Specifications
GOST R ISO 4545-4-2015 Metallic materials. Knoop hardness test. Part 4. Table of hardness values
GOST 11034-1982 Polyamides. Method for determination of the viscosity number of dilute solution
GOST 11034-2018 Polyamides. Method for determination of the viscosity number of dilute solutions
GOST 14040-1982 Polyvinylchloride and vinylchloride copolymers. Method for determination of viscosity number and K-value
GOST 9995-1975 Base paper for binding material. Specifications
GOST 23955-1980 Paint materials. Methods for determination of acid value
GOST 32299-2013 Paint materials. Pull-off test for adhesion
GOST R 57845-2017 Polymer composites. Calculation of normative values for structural materials
GOST 21216-2014 Clay raw materials. Test methods
GOST 4.204-1979 Quality rating system. Building. Binding materials: lime, gipsum and binding materials on their base. Nomenclature of characteristics
GOST R 57009-2016 Polymer composites. Test method for fracture strength in cleavage of adhesives in bonded joints
GOST 4.228-1983 Product-quality index system. Building. Adhesive polymer materials. Nomenclature of indices
GOST 20489-1975 Materials for clothes. Method for determination of summary thermal resistance
GOST 3594.5-1977 Moulding clay. Method for the determination of hydrogen ion concentration of water extract
GOST R 59423-2021 Dentistry. Restorative materials. Shear test methods for determining the strength of adhesive joints
GOST R 57728-2017 Polymer composites. Determination of shear strength of adhesive bond by the block-shear method

SE-SIS, Material viscosity value

SIS SS 3578-1987 Plastics pipes - Extraction of PVC-resin and determination of relativ viscosity, viscosity number and K-value
SIS MNC 1101-1980 Meta I lic materials — Hardness test — Calculation of Brinell hardness values
SIS MNC 1102-1980 Meta/lic materials — Hardness test — Calculation of Vickers hardness values
SIS SS IEC 699:1984 Insulating materials — Test method for the evaluation of bond strength of impregnating varnishes by the
SIS 16 63 11-1966 Polyvinyl chloride. Determination of viscosity number of PVC resin in solution

Lithuanian Standards Office , Material viscosity value

LST EN ISO 18265:2004 Metallic materials - Conversion of hardness values (ISO 18265:2003)
LST EN 15307-2007 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
LST EN ISO 6506-4:2015 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2014)
LST EN ISO 6506-4:2006 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2005)
LST EN ISO 4545-4:2006 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2005)
LST EN 12964-2002 Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature
LST EN 60450-2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004)
LST EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values (ISO 6507-4:2005)
LST EN 13892-8-2003 Methods of test for screed materials - Part 8: Determination of bond strength
LST EN 1392-2006 Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions
LST EN ISO 15880:2004 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000)
LST EN 60450-2004/A1-2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004/A1:2007)
LST EN 13494-2003 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material

AENOR, Material viscosity value

UNE-EN ISO 18265:2014 Metallic materials - Conversion of hardness values (ISO 18265:2013)
UNE-EN 15307:2015 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
UNE-EN ISO 4545-4:2006 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2005)
UNE-EN ISO 6506-4:2015 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2014)
UNE-EN 12964:2001 Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature.
UNE-EN ISO 6507-4:2007 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values (ISO 6507-4:2005)
UNE 104206:1999 WATERPROOFING. BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. UNADHESIVE MATERIALS.
UNE-ISO 1628-4:2013 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
UNE-EN 13892-8:2003 Methods of test for screed materials - Part 8: Determination of bond strength
UNE-EN 1392:2007 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions
UNE-EN ISO 15880:2005 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000)
UNE-EN 60450:2005/A1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004/A1:2007).
UNE 104281-3-3:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS. VISCOSITY SAYBOLT FUROL
UNE 104281-2-2:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. TARS AND PITCHES. TESTING METHODS. VISCOSITY BRTA
UNE-EN 13494:2003 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material

GM Daewoo, Material viscosity value

GMKOREA EDS-T-7678-2011

VN-TCVN, Material viscosity value

TCVN 6587-2000 Raw materials for production of fireclay refractories.Clay
TCVN 5887-4-2008 Metallic materials.Knoop hardness test.Part 4: Table of hardness values
TCVN 258-4-2007 Metallic materials.Vickers hardness test.Part 4:Tables of hardness values
TCVN 256-4-2007 Metallic materials.Brinell hardness test.Part 4:Table of hardness values
TCVN 6588-2000 Raw materials for production of fireclay refractories.caolin
TCVN 7072-2008 Pulps.Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution

(U.S.) Ford Automotive Standards, Material viscosity value

FORD FLTM BP 117-01-2001 POLYMERIC MATERIALS - HIGH VISCOSITY LUBRICANT COMPATIBILITY
FORD FLTM BP 117-1-2001 POLYMERIC MATERIALS - HIGH VISCOSITY LUBRICANT COMPATIBILITY
FORD FLTM BN 151-05-2008 DETERMINATION OF 180 DEGREE PEEL ADHESION STRENGTH OF LAMINATES
FORD FLTM BV 001-05-2000 BOND ADHESION OF ACOUSTICAL DEADENERS
FORD ESB-M5G28-A-1981 DEADENER, MASTIC - PRESSURE SENSITIVE - ADHESIVE BONDED

CZ-CSN, Material viscosity value

CSN 64 0348-1982 Plastice. Determination of viscosity b? eans of the Hoppler-Viscosimeter
CSN 64 0363-1982 Polyamides. Determination of the vis- osity number in dilute solution
CSN 64 0349-1982 Plastics. Determination of viscosity by means of the Hoppler reoviscosimeter
CSN 66 6611-1983 Determination of gradient and gamma value of photo- graphic materials on trans- parent base
CSN 72 1134-1966 Binding property determination of ceramic materials
CSN ISO 410:1993 Metallic materials. Hardness test. Tables of brinell hardness values for use in tests made on flat surfaces
CSN 72 1075-1971 Determination of apparent viscosity of ceramic suspensions

国家市场监督管理总局、中国国家标准化管理委员会, Material viscosity value

GB/T 4340.4-2022 Metallic materials—Vickers hardness test—Part 4：Tables of hardness values
GB/T 18449.4-2022 Metallic materials—Knoop hardness test—Part 4: Tables of hardness values
GB/T 39289-2020 Determination of the adhesion strength—Plastic and metal

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Material viscosity value

GB/T 18449.4-2009 Metallic materials-Knoop hardness test-Part 4: Tables of hardness values
GB/T 4340.4-2009 Metallic materials.Vickers hardness test.Part 4:Tables of hardness values
GB/T 231.4-2009 Metallic materials.Brinell hardness test.Part 4:Tables of hardness values
GB/T 2791-1995 Adhesives, T peel strength test method for a flexible-to-flexible test specimen assembly
GB/T 7124-2008 Adhesives.Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
GB/T 17394.4-2014 Metallic materials.Leeb hardness test.Part 4:Tables of hardness values conversation
GB/T 1723-1993 Determination of viscosity of coatings
GB/T 9269-1988 Determination of viscosity of architectural paints and coatings--Stormer viscosimeter method
GB/T 7761-2003 Rubber--Determination of adhesion to rigid materials using conical shaped parts
GB/T 7761-1987 Rubber--Determination of adhesion to rigid materials using conical shaped parts
GB/T 18880-2002 Materials of bonded neodymium iron boron permanent magnets
GB/T 18880-2012 Materials for bonded neodymium iron boron permanent magnets

TH-TISI, Material viscosity value

TIS 1243-1994 Standard test method for viscosity of bituminous materials by vacuum capillary viscometer
TIS 1249-1994 Standard test method for kinematic viscosity of bituminous materials

U.S. Military Regulations and Norms, Material viscosity value

ARMY MIL-PRF-51483 A-2011 EDGESEAL MATERIAL, SELF-ADHERING
ARMY UFGS-02 56 15-2010 GEOSYNTHETIC CLAY LINER (GCL)

IN-BIS, Material viscosity value

YU-JUS, Material viscosity value

JUS G.S2.518-1997 Plastics - Determination of viscosity number ofpofy(vinyl chloride) (PVC) in formulated compounds
JUS B.D8.316-1988 Refractories. Methods of physica' testing. Determination of cold crushing strength for tar-bondid, tar-bondid tempered and tar-impregnated refractories materials
JUS B.D8.210-1982 Refractories. Chemical analysis fired clay production, raw and high aluminium raw materials

CEN - European Committee for Standardization, Material viscosity value

EN 522:1998 Adhesives for Leather and Footwear Materials - Bond Strength - Minimum Requirements and Adhesive Classification
EN 1391:1998 Adhesives for Leather and Footwear Materials - A Method for Evaluating the Bondability of Materials - Minimum Requirements and Material Classification
PREN 13494-2017 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material

未注明发布机构, Material viscosity value

BS EN 522:1998(1999) Adhesives for leather and footwear materials — Bond strength — Minimum requirements and adhesive classification
BS EN ISO 3990:2023 Dentistry — Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials
BS EN 1391:1998 Adhesives for leather and footwear materials — A method for evaluating the bondability of materials — Minimum requirements and material classification
BS EN 60450:2004(2007) Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials

Society of Automotive Engineers (SAE), Material viscosity value

SAE J1524-1995 Method of Viscosity Test for Automotive Type Adhesives, Sealers, and Deadeners
SAE AGS2097-5-2005 AGS2097 Bonding, Flexibles - General
SAE AS3360-7-2003 AS3360 Bonding, Flexibles - General

SAE - SAE International, Material viscosity value

SAE J1524-2021 Method of Viscosity Test for Automotive Type Adhesives@ Sealers@ and Deadeners
SAE J1524-1988 Method of Viscosity Test for Automotive Type Adhesives@ Sealers@ and Deadeners
SAE J1524-1985 Method of Viscosity Test for Automotive Type Adhesives@ Sealers@ and Deadeners

PL-PKN, Material viscosity value

PN C89430-1993 Plastics. Guidelines for the standardization of methods for teh determination of viscosity number and limiting viscosity number of polymers in dilute solution. General conditions
PN C89408-1986 Plastics -- Determination of viscosity by Hoppler's viscometer and Hoppler's rheoviscometer
PN C04208-1990 Raw-rubber and rubber compounds Dctcrmination ol' viscosity and rat? ol curc by thc Mooney viscometer

Professional Standard - Petroleum, Material viscosity value

SY/T 7547-1996 Measurement of crude oil yield value.Rotovisco method
SY 7547-2014 Rotational Viscometer Method for Determination of Yield Value of Crude Oil
SY/T 7547-2014 Determination of crude oil yield value by rotational viscometer

RO-ASRO, Material viscosity value

STAS 3411-1971 CLAY OF VIEZUROIU AREA FOR REFRACTORIES
STAS 8587-1988 CELLULOSIC TEXTILES Determination of limiting viscosity value
STAS 7144-1980 Hard laminated materials RESIN BONDED PAPER SHEETS

Taiwan Provincial Standard of the People's Republic of China, Material viscosity value

CNS 2889-1984 Method of Test for Compressive (Crushing) Strength of Fired Whiteware Clay Materials
CNS 11422-1985 Method of Test for Refractoriness of Fireclay Plastic Refractories
CNS 14186-1998 Method of test for viscosity determination of unfilled asphalt using the brookfield thermosel apparatus

Professional Standard - Chemical Industry, Material viscosity value

HG/T 4139-2010 Release materials for pressure sensitive adhesive products
HG/T 2875-1997 Cellular material for rubber-plastic shoes-Determination of imtrinsic value of crosslink density
HG/T 2875-2023 Test method for characteristic value of cross-linking density of microporous materials in rubber and plastic shoes

Indonesia Standards, Material viscosity value

SNI 13-6788-2002 Test methods of peat material pH by pH meter
SNI 01-6965-2003 Test methods for pH of peat material

KR-KS, Material viscosity value

KS L 6001-2022 Bonded abrasive grain sizes
KS M ISO 15880-2017 Paints, varnishes and binders－Determination of MEQ value of water-based coating materials and binders
KS M ISO 15880-2022 Paints, varnishes and binders — Determination of MEQ value of water-based coating materials and binders
KS F 2902-2008(2023) Test methods for bond strength of sprayed fire resistive material applied to structural members
KS M ISO 12058-1-2022 Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method

Military Standard of the People's Republic of China-General Armament Department, Material viscosity value

GJB 1059.2-1990 Phenolic Resin Test Method for Viscosity Testing of Ablative Materials
GJB 1059.2A-2020 Test Methods for Phenolic Resins for Ablative Materials Part 2: Viscosity Test

SG-SPRING SG, Material viscosity value

SS 5 Pt.B16-1987 Methods Of Test For Paints, Varnishes And Related Materials Part B16: Determination Of Viscosity By The Brookfield Viscometer

HU-MSZT, Material viscosity value

VE-FONDONORMA, Material viscosity value

COVENIN 616-1975

ES-AENOR, Material viscosity value

GM Holden Ltd, Material viscosity value

HOLDEN HN 1235-1971 Bonded Cellulose Gasket Material

GM North America, Material viscosity value

GM GM6292M-1992 Vibration Damping Material - Heat Bondable (Revision A)
GM GM9145P-1993 Test for the Bond Strength of Dielectrically Embossed Trim Material Replaced by GM9159P
GM GM9643P-1996 Shrinkage of Heat-Bonding Sheet Form Materials

Professional Standard - Building Materials, Material viscosity value

JC/T 2011-2010 Adhesives for friction materials
JC/T 2709-2022 Test method for pH value of friction materials

工业和信息化部, Material viscosity value

JC/T 2011-2021 Binders for friction materials

Professional Standard - Aviation, Material viscosity value

HB/Z 215-1992 Conversion value of hardness and strength of aluminum alloy sheet
HB 7110-1994 Test method for detail fatigue rating cutoff (DFRcutoff) of metallic materials
HB 0-35-2011 Limits of incline angle for extrusion section
HB 0-35-1983 Extrusion profile inclination angle limit value
HB 0-35-1974 Extrusion profile inclination angle limit value

CU-NC, Material viscosity value

NC 54-317-1985 Construction Materials and Products. Clay Materials. Determination of Aging
NC 54-315-1985 Construction Materials and Products. Clay Materials Determination of Plasticity and Plastic Water
NC 15-74-1987 Thermotechnics. Material Thermal Conductivity Values
NC 54-313-1985 Construction Materials and Products. Clay Materials Elab〓tion of Briquets

BE-NBN, Material viscosity value

NBN T 03-485-1988 Carbonaceous materials used in the production of aluminium - Pitch for eletrodes- Measurement of dynamic viscosity

International Electrotechnical Commission (IEC), Material viscosity value

IEC 60450:2004/AMD1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials; Amendment 1
IEC 60450:2004+AMD1:2007 CSV Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials

Group Standards of the People's Republic of China, Material viscosity value

T/CSTM 00332-2022 Test method for pH value of friction materials
T/YNIA 005-2022 Through Air Bonding Nonwovens
T/CWAN 0078-2023 Raw and auxiliary materials for welding consumables- Technical requirements for procurement of binders

Professional Standard - Textile, Material viscosity value

FZ/T 50010.9-1998 Pulp board for viscose fiber.Determination of alkaline absorption number and swelling degree

Professional Standard - Medicine, Material viscosity value

YY/T 1433-2016 Test method of hot seal strength(hot tack)of flexible webs of medical devices
YY/T 0269-2009 Dental-Orthodontic bracket adhesive materials

NO-SN, Material viscosity value

NS 152-1973 Piping - Pressure and temperature ratings for pipeline components of ferrous materials

United States Navy, Material viscosity value

NAVY QPL-24179-26-2010 ADHESIVE, FLEXIBLE UNICELLULAR-PLASTIC THERMAL INSULATION
NAVY QPL-24179-2010 ADHESIVE, FLEXIBLE UNICELLULAR-PLASTIC THERMAL INSULATION

GM Europe, Material viscosity value

GME TM 373600-1994 Selbstklebende Isolierung Self Adhesive Insulation English/German

Professional Standard - Railway, Material viscosity value

TB/T 2981-2000 Determination of the highest calorific value of material combustion