ZH
RU
ES

Quickly measure the surface area of a material

Quickly measure the surface area of a material, Total:497 items.

In the international standard classification, Quickly measure the surface area of a material involves: Analytical chemistry, Packaging materials and accessories, Raw materials for rubber and plastics, Protection against dangerous goods, Laboratory medicine, Particle size analysis. Sieving, Measurement of fluid flow, Farming and forestry, Lubricants, industrial oils and related products, Leather technology, Insulating materials, Paints and varnishes, Microbiology, Insulating fluids, Metrology and measurement in general, Testing of metals, Rubber and plastics products, Elements of buildings, Electricity. Magnetism. Electrical and magnetic measurements, Manufacturing forming processes, Wastes, Tyres, Furniture, Non-textile floor coverings, Medical equipment, TESTING, Nuclear energy engineering, Products of the chemical industry, Materials for the reinforcement of composites, Plastics, Protection against fire, Surface treatment and coating, Products of the textile industry, Construction materials, Magnetic materials, Powder metallurgy, Petroleum products in general, Pipeline components and pipelines, Environmental testing, Wood, sawlogs and sawn timber, Acoustics and acoustic measurements, Road engineering, Photography, Rubber, Solar energy engineering, Optics and optical measurements, Dentistry, Linear and angular measurements, Electrical and electronic testing, Ceramics, Reinforced plastics, Refractories, Cellular materials, Electrical engineering in general, Wood-based panels, Materials and articles in contact with foodstuffs, Installations in buildings, Water quality, Waxes, bituminous materials and other petroleum products, Air quality, Paper products, Adhesives, Coatings and related processes used in aerospace industry, Road vehicle systems, Glass, Food products in general, Kitchen equipment.


国家市场监督管理总局、中国国家标准化管理委员会, Quickly measure the surface area of a material

  • GB/T 40139-2021 Measuring method for surface areas of materials—Three dimensional area measurement base on hyperspectral imaging
  • GB/Z 38062-2019 Nanotechnologies—Determination of specific surface area of graphene materials—Methylene blue adsorption method
  • GB/T 40389-2021 Sintered metal materials, excluding hardmetals—Measurement of surface roughness
  • GB/T 40612-2021 Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface—Method by analysis of evolved carbon dioxide

AENOR, Quickly measure the surface area of a material

  • UNE 22164:1994 DETERMINATION OF BET SPECIFIC SURFACE FOR SEPIOLITIC MATERIALS.
  • UNE 21303:1983 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS.
  • UNE-EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
  • UNE-EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
  • UNE-EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
  • UNE-EN ISO 3892:2002 Conversion coatings on metallic materials- Determination of coating mass per unit area- Gravimetric methods. (ISO 3892:2000)
  • UNE-EN 13892-6:2003 Methods of test for screed materials - Part 6: Determination of surface hardness
  • UNE 55626:1983 SURFACE ACTIVE AGENTS. SODIUM AND POTASSIUM SILICATES TO BE USED AS RAW-MATERIALS IN DETERGENT FORMULATIONS. DETERMINATION OF CARBONATES CONTENT. GAS-VOLUMETRIC METHOD
  • UNE-EN 14196:2017 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
  • UNE 55611:1981 SURFACE ACTIVE AGENTS. SODIUM HYDROXIDE FOR USE AS RAW-MATERIAL IN DETERGENT FORMULATIONS. DETERMINATION OF CARBONATES CONTENT. GAS-VOLUMETRIC METHOD
  • UNE-EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
  • UNE-EN ISO 21530:2004 Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004)
  • UNE-EN 60343:1996 RECOMMENDED TEST METHOD FOR DETERMINING THE RELATIVE RESISTANCE OF INSULATING MATERIALS TO BREAKDOWN BY SURFACE DISCHARGES.

PL-PKN, Quickly measure the surface area of a material

  • PN C89652-1987 Porous materials and powders The BET method for the determination of the specific surface area
  • PN H04185-1992 Refractory materials. Determination of bulk density, apparent porosity, true porosity and water absorbability
  • PN C04422-1968 Inorganic pigment* for paints Determination ol specific area
  • PN C04404-11-1988 Pigments for paints General methods of test Determination of the specific surface area and texture

Group Standards of the People's Republic of China, Quickly measure the surface area of a material

  • T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method
  • T/KJFX 001-2020 Isothermal amplification method for rapid detection of Listeria spp. on food contact surfaces
  • T/SLIA 001-2019 Food contact materials and articles, adornment—Determination of surface area— Three-dimensional model reconstruction method
  • T/SSPI 002-2021 Fast and intuitive test method of mildew resistance properties of macromolecular material products
  • T/CPCIF 0148-2021 Plastics—Ultrahigh melt fluidity polypropylene materials— Determination of melt volume-flow rate（MVR）and melt mass-flow rate（MFR）

IPC - Association Connecting Electronics Industries, Quickly measure the surface area of a material

BR-ABNT, Quickly measure the surface area of a material

IT-UNI, Quickly measure the surface area of a material

International Organization for Standardization (ISO), Quickly measure the surface area of a material

  • ISO 18852:2005 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
  • ISO 18852:2015 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
  • ISO 18852:2012 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
  • ISO 3354:1975 Measurement of clean water flow in closed conduits — Velocity-area method using current-meters
  • ISO 25178-73:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 73: Terms and definitions for surface defects on material measures
  • ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
  • ISO 6272-2:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
  • ISO 6272-1:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
  • ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
  • ISO 18213-5:2008 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy - Part 5: Accurate determination of liquid height in accountancy tanks equipped with dip tubes, fast bubbling rate
  • ISO 22415:2019 Surface chemical analysis — Secondary ion mass spectrometry — Method for determining yield volume in argon cluster sputter depth profiling of organic materials
  • ISO 12800:2003 Nuclear fuel technology - Guide to the measurement of the specific surface area of uranium oxide powders by the BET method
  • ISO 12800:2017 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
  • ISO 19712-2:2007 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
  • ISO 1088:1985 Liquid flow measurement in open channels; Velocity-area methods; Collection and processing of data for determination of errors in measurement
  • ISO 3892:2000 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
  • ISO 4498-2:1981 Sintered metal materials, excluding hardmetals; Determination of apparent hardness; Part 2 : Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
  • ISO 3892:1980 Conversion coatings on metallic materials; Determination of coating mass per unit area; Gravimetric methods
  • ISO/PRF 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
  • ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
  • ISO 21530:2004 Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants
  • ISO 23519:2010 Sintered metal materials, excluding hardmetals - Measurement of surface roughness
  • ISO 1460:1992 Metallic coatings; hot dip galvanized coatings on ferrous materials; gravimetric determination of the mass per unit area
  • ISO 18830:2016 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer
  • ISO 5017:1988 Dense shaped refractory products; determination of bulk density, apparent porosity and true porosity
  • ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
  • ISO 19679:2020 Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide
  • ISO 19679:2016 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide
  • ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test)
  • ISO 4498-1:1990 Sintered metal materials, excluding hardmetals; determination of apparent hardness; part 1: materials of essentially uniform section hardness
  • ISO 4498-1:1978 Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness
  • ISO 1460:1973 Metallic coatings — Hot dip galvanized coatings on ferrous materials — Determination of the mass per unit area — Gravimetric method
  • ISO 1460:2020 Metallic coatings — Hot dip galvanized coatings on ferrous materials — Determination of the mass per unit area — Gravimetric method

British Standards Institution (BSI), Quickly measure the surface area of a material

  • BS ISO 18852:2012 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
  • BS ISO 18852:2015 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
  • BS EN ISO 25178-73:2019 Geometrical product specifications (GPS). Surface texture: Areal - Terms and definitions for surface defects on material measures
  • BS EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Determination of properties - Solid surface shapes
  • PD CEN/TS 17510:2020 Materials obtained from end-of-life tyres. Determination of the specific surface area of powders. Method based on krypton adsorption
  • BS EN ISO 6272-1:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, large-area indenter
  • BS EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Determination of properties - Sheet goods
  • BS EN ISO 6272-2:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, small-area indenter
  • BS 6233:1982 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
  • BS EN ISO 12800:2019 Nuclear fuel technology. Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
  • BS ISO 12800:2017 Nuclear fuel technology. Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
  • BS EN ISO 2286-2:2016 Tracked Changes. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
  • BS EN 13892-6:2002 Methods of test for screed materials - Determination of surface hardness
  • BS EN 10282:2001 Magnetic Materials - Method of Test for the Determination of Surface Insulation Resistance of Electrical Sheet and Strip
  • BS EN ISO 3892:2001 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
  • BS EN ISO 13478:2008 Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test (FST)
  • BS EN ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST)
  • BS ISO 13473-3:2002 Characterization of pavement texture by use of surface profiles - Specification and classification of profilometers
  • BS ISO 14309:2019 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity
  • BS ISO 22415:2019 Surface chemical analysis. Secondary ion mass spectrometry. Method for determining yield volume in argon cluster sputter depth profiling of organic materials
  • BS EN ISO 19712-3:2022 Tracked Changes. Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
  • BS ISO 23519:2010 Sintered metal materials, excluding hardmetals - Measurement of surface roughness
  • BS EN 60404-11:2013 Magnetic materials. Method of test for the determination of surface insulation resistance of magnetic sheet and strip
  • BS 476-33:1993 Fire tests on building materials and structures. Full-scale room test for surface products
  • BS EN ISO 1460:1995 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
  • BS ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
  • BS EN ISO 21530:2004 Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants
  • BS EN ISO 1133-2:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Method for materials sensitive to time-temperature history and/or moisture
  • BS EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials. Determination of resistive properties (DC Methods). Surface resistance and surface resistivity
  • BS ISO 18830:2016 Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface. Method by measuring the oxygen demand in closed respirometer
  • 19/30373150 DC BS IEC 62788-8-2. Measurement procedures for materials used in photovoltaic modules. Part 7-3. Environmental exposures. Accelerated abrasion tests of PV module external surfaces
  • BS EN ISO 19679:2020 Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
  • BS EN ISO 1460:2020 Metallic coatings. Hot dip galvanized coatings on ferrous materials. Gravimetric determination of the mass per unit area
  • BS EN 60343:1993 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
  • BS EN 1388-2:1996 Materials and articles in contact with foodstuffs - Silicate surfaces - Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
  • BS EN 16057:2012 Influence of metallic materials on water intended for human consumption. Determination of residual surface lead (Pb). Extraction method
  • BS EN ISO 18830:2017 Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface. Method by measuring the oxygen demand in closed respirometer
  • BS ISO 19679:2016 Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
  • BS ISO 14606:2015 Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
  • BS ISO 14606:2000 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
  • BS ISO 14606:2001 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
  • 19/30399400 DC BS EN ISO 19679. Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide

CZ-CSN, Quickly measure the surface area of a material

  • CSN 72 5042-1973 Testing of fired ceranyc materials. Definition of the specific surface and volume resistivities
  • CSN IEC 93:1993 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
  • CSN 73 0863-1983 Dotcrmiiuuion of flamo propagation along tho surfaco of buildirig matorias
  • CSN 66 6620 Z3-1998
  • CSN 66 6620 Z5-1998
  • CSN 34 6412-1985 Testing methods of electrical insulating materials.Determination of resistance of electrical materials against moulds measured by surface electrical resistivity
  • CSN 72 5010-1988 Determination of water absorptivity, apparent and true porosity, bulk density and apparent density solid density of fired ceramic materials and products
  • CSN ISO 410:1993 Metallic materials. Hardness test. Tables of brinell hardness values for use in tests made on flat surfaces

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Quickly measure the surface area of a material

  • GB/T 27842-2011 Chemicals.Test method for dynamic surface tension.Fast-bubble technique
  • GB/T 18570.5-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 5:Measurement of chloride on surfaces prepared for painting (ion detection tube method)
  • GB/T 9792-2003 Conversion coatings on metallic materials-Determination of coating mass per unit area-Gravimetric methods
  • GB/T 9792-1988 Gravimetric method for determination of coating mass per unit area of conversion coatings on metallic materials
  • GB/T 18570.2-2001 Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Laboratory determination of chloride on cleaned surfaces
  • GB/T 31529-2015 Digital printing materials.Computer direct plate-making plate(CTP Plate).Test of unit area weight of photosensitive coating
  • GB/T 13288.5-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the detdrmination of the surface profile.
  • GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure
  • GB/T 18570.2-2009 Preparation of steel substrates before application of paints and related products.Tests for the assesssment of surface cleanliness.Part 2:Laboratory determination of chloride on cleaned surfaces
  • GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface profil
  • GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the calibration of ISO surface profile comparators and for the determination of surface
  • GB/T 18570.8-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 8:Field method for the refractometric determination of moisture
  • GB/T 19280-2003 Thermoplastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test)
  • GB/T 13762-2009 Geosynthetics.Test method for the determination of mass per unit area of geotextiles and geotextile-related products
  • GB/T 19816.4-2005 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 4:Determination of apparent density
  • GB/T 9097.1-2002 Sintered metal materials,excluding hardmetals--Determination of apparent hardness Part 1: Materials of essentially uniform section hardness
  • GB/T 18570.9-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 9:Field method for the conductometric determination of water-soluble salts
  • GB/T 18570.10-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 10:Field method for the titrimetric determination of water-soluble chloride
  • GB/T 18570.12-2008 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 12:Field method for the titrimetric determination of water-soluble ferrous ions
  • GB/T 18570.11-2009 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 11:Field method for the turbidimetric determination of water-soluble sulfate

Association Francaise de Normalisation, Quickly measure the surface area of a material

  • NF T45-023*NF ISO 18852:2015 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
  • NF EN ISO 25178-70:2014 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 70 : mesures matérialisées
  • NF EN 16074:2019 Peintures et vernis - Détermination de la teneur en matière non volatile et du rendement superficiel spécifique de revêtements pour prélaquage
  • XP T47-769*XP CEN/TS 17510:2020 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorptionX
  • NF C26-215:1982 Method of testing insulating materials. Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials.
  • NF M60-456*NF EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
  • NF T54-370-3*NF EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3 : determination of properties - Solid surface shapes
  • NF T54-370-2*NF EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2 : determination of properties - Sheet goods
  • XP CEN/TS 17510:2020 Matériaux produits à partir de pneus usagés non réutilisables - Détermination de la surface spécifique des poudrettes - Méthode fondée sur l'adsorption de krypton
  • NF DTU 26.2 P1-1:2008 Technologie du combustible nucléaire - Étalonnage et détermination du volume de cuve pour la comptabilité des matières nucléaires - Partie 5 : détermination précise de la hauteur de liquide dans une cuve bilan équipée de cannes de bullage, bullage rapide
  • NF A95-321-2:1988 Powder metallurgy. Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2 : case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen.
  • NF EN ISO 3892:2001 Couches de conversion sur matériaux métalliques - Détermination de la masse de revêtement par unité de surface - Méthodes gravimétriques
  • NF T70-201:2009 Energetic materials for defence - Speed determination with immaterial barrier and doppler equipment - Generalities
  • NF EN 13892-6:2003 Méthodes d'essai des matériaux pour chapes - Partie 6 : détermination de la dureté de la surface
  • NF E05-031-73*NF EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture : Areal - Part 73 : terms and definitions for surface defects on material measures
  • NF A91-474:1995 CONVERSION COATINGS ON METALLIC MATERIALS. DETERMINATION OF COATING MASS PER UNIT AREA. GRAVIMETRIC METHODS. (EUROPEAN STANDARD EN ISO 3892).
  • NF A91-474*NF EN ISO 3892:2001 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
  • NF A91-123:1995 Metallic coatings. Hot dip galvanized coatings on ferrous materials. Gravimetric determination of the mass per unit area.
  • FD CEN/TR 14723:2006 Durabilité du bois et des matériaux dérivés du bois - Essais de champ et de conditionnement accéléré (FACT) pour les produits de préservation du bois hors contact du sol
  • NF P98-254-2:1993 Tests relating to pavements. Surface drainage properties on pervious pavements. Determination of the connected voids content of bounded materials.
  • NF S91-314*NF EN ISO 21530:2004 Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants
  • NF P98-282:2007 Tests relating to pavement - Waterproofing materials for structures - Measurement of adherence of materials to the substrate - Laboratory or in-situ testing at controlled tensile test speed
  • NF T73-290*NF EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two phase titration method
  • NF T54-907*NF EN ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test)
  • NF G38-066*NF EN 14196:2016 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
  • NF T51-814*NF EN ISO 19679:2020 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide
  • NF EN ISO 21530:2004 Art dentaire - Matériaux utilisés pour les surfaces du matériel dentaire - Détermination de la résistance aux désinfectants chimiques
  • NF D25-501-2*NF EN 1388-2:1996 Materials and articles in contact with foodstuffs. Silicate surfaces. Part 2 : determination of the release of lead and cadmium from silicate surface other than ceramic ware.
  • NF EN ISO 18830:2017 Plastiques - Détermination de la biodégradation aérobie des matières plastiques immergées à l'interface eau de mer/sédiments sableux - Méthode par mesurage de la demande en oxygène dans un respiromètre fermé
  • NF T51-038-2*NF EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2 : method for materials sensitive to time-temperature history and/or moisture
  • NF P41-041*NF EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
  • NF A95-321-1:1993 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 1 : materials of essentially uniform section hardness.
  • NF C26-631-3-2*NF EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2 : determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
  • NF EN 60343:1993 Méthodes d'essai recommandées pour la détermination de la résistance relative des matériaux isolants au claquage par les décharges superficielles
  • NF EN 16057:2012 Influence des matériaux métalliques sur l'eau destinée à la consommation humaine - Dosage du plomb (Pb) résiduel de surface - Méthode d'extraction
  • NF X10-114:1993 Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or pitot static tubes.
  • NF T51-813*NF EN ISO 18830:2017 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer
  • NF C26-240*NF EN 60343:1993 Recommanded test methods for determining the relative resistance of insulating materials to breakdown by surface discharges.
  • NF EN IEC 60404-11:2021 Matériaux magnétiques - Partie 11 : méthodes de mesurage de la résistance d'isolement superficiel des bandes et tôles en acier électrique

IN-BIS, Quickly measure the surface area of a material

CH-SNV, Quickly measure the surface area of a material

  • SN ISO 9003:1988 Quality Systems - Model for quality assurance in final inspection and test
  • SN EN ISO 19679:2020 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)

American Society for Testing and Materials (ASTM), Quickly measure the surface area of a material

  • ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
  • ASTM D3825-90(1995) Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
  • ASTM D3825-90(2005) Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
  • ASTM D3825-09 Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
  • ASTM UOP964-11 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
  • ASTM D3825-90(2000) Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
  • ASTM E103-84(1996) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
  • ASTM E103-84(2002) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
  • ASTM D1895-17 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
  • ASTM D1331-20 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
  • ASTM D3850-94(2000) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
  • ASTM D3850-94(2006) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
  • ASTM D3850-12 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
  • ASTM C1338-19 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
  • ASTM C1338-19(2022) Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
  • ASTM E1477-98A(2017)e1 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
  • ASTM E1477-98a(2017) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
  • ASTM E162-94 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ASTM E162-90e1 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ASTM E162-98 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ASTM E162-02 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ASTM E162-16 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ASTM F386-17 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
  • ASTM E162-21 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ASTM C830-00 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
  • ASTM C830-00(2016) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
  • ASTM C830-00(2006) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
  • ASTM D5624-02(2007) Standard Test Method for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications
  • ASTM F2791-09 Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
  • ASTM C830-00(2023) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
  • ASTM E162-15 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ASTM E162-15a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ASTM E162-15b Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ASTM D2065-96 Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
  • ASTM D3675-12 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
  • ASTM D2726-10 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D3675-11 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
  • ASTM D3675-09a Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
  • ASTM D8280-20 Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
  • ASTM D8280-20a Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
  • ASTM F502-93(1998)e1 Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
  • ASTM F502-08(2019) Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
  • ASTM D3675-21 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
  • ASTM D3675-19 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
  • ASTM D3675-21a Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
  • ASTM D3675-17 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
  • ASTM D3675-22 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

German Institute for Standardization, Quickly measure the surface area of a material

  • DIN EN ISO 25178-70:2014-06 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014); German version EN ISO 25178-70:2014
  • DIN 19279:2018-01 Photocatalytic activity of surfaces - Determination of the photocatalytic deposition velocity of nitrogen monoxide at photocatalytically active surfaces
  • DIN EN ISO 25178-73:2019-10 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019); German version EN ISO 25178-73:2019
  • DIN CEN/TS 17510:2020-12 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption; German version CEN/TS 17510:2020
  • DIN IEC 60093:1993 Methods of test for insulating materials for electrical purposes; volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093:1980); German version HD 429 S1:1983
  • DIN EN 12458:1999 Surface active agents - Determination of stability in hard water; German version EN 12458:1999
  • DIN EN ISO 12800:2019-09 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017); German version EN ISO 12800:2019
  • DIN EN 1890:2006 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide English version of DIN EN 1890:2006-09
  • DIN CEN/TS 17510:2020 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption; German version CEN/TS 17510:2020
  • DIN EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017)
  • DIN EN ISO 12800:2018 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017); German and English version prEN ISO 12800:2018
  • DIN EN ISO 2286-2:2017-01 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-...
  • DIN 53438-3:1984-06 Testing of combustible materials; response to ignition by a small flame; surface ignition
  • DIN 10050-7:1973 Testing of butter wrappers, determination of water soluble components of the surface of the wrapper contacting butter
  • DIN EN ISO 308:1998 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997
  • DIN EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011); German version EN ISO 6272-1:2011
  • DIN EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011); German version EN ISO 6272-2:2011
  • DIN EN 13892-6:2003-02 Methods of test for screed materials - Part 6: Determination of surface hardness; German version EN 13892-6:2002
  • DIN 50988-2:1988 Measurement of coating thickness; determination of the mass per unit area of zinc and tin-coatings on ferrous materials by dissolution of the coating material; volumetric method
  • DIN EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
  • DIN EN ISO 21530:2004 Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004); German version EN ISO 21530:2004
  • DIN ISO 23519:2015-12 Sintered metal materials, excluding hardmetals - Measurement of surface roughness (ISO 23519:2010)
  • DIN 58298-19:2002-07 Materials, finish and testing of medical instruments - Part 19: Trocars
  • DIN EN 14196:2016-08 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers; German version EN 14196:2016
  • DIN EN ISO 3892:2001-12 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); German version EN ISO 3892:2001
  • DIN EN ISO 1460:2020-12 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020); German version EN ISO 1460:2020
  • DIN EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005
  • DIN EN 14668 Berichtigung 1:2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005, Corrigenda to DIN EN 14668:2005-09; German version EN 14
  • DIN EN ISO 19679:2020-11 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020); German version EN ISO 19679:2020
  • DIN EN ISO 21530:2004-09 Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004); German version EN ISO 21530:2004
  • DIN EN ISO 1133-2:2012-03 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011); German version EN ISO 1133-2:2011
  • DIN EN 12139:1999 Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC; German version EN 12139:1999
  • DIN ISO 23519:2015 Sintered metal materials, excluding hardmetals - Measurement of surface roughness (ISO 23519:2010)
  • DIN EN 60343:1994 Recommended test methods for determinig the relative resistance of insolating materials to breakdown by surface discharges test methods (IEC 60343:1991); German version EN 60343:1993
  • DIN EN 1721:1998 Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack; German version EN 1721:1998
  • DIN EN 16057:2012-07 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method; German version EN 16057:2012
  • DIN EN 1388-2:1995-11 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware; German version EN 1388-2:1995
  • DIN EN ISO 18830:2018-02 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer (ISO 18830:2016); German version EN ISO 18830:2017

ES-UNE, Quickly measure the surface area of a material

  • UNE-EN ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) (Endorsed by AENOR in January of 2015.)
  • UNE-EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
  • UNE-CEN/TS 17510:2020 Materials obtained from End-of-Life Tyres - Determination of the specific surface area of powders - Method based on krypton adsorption (Endorsed by Asociación Española de Normalización in December of 2020.)
  • UNE-EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017) (Endorsed by Asociación Española de Normalización in July of 2019.)
  • UNE-EN ISO 1460:2021 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020)
  • UNE-EN ISO 19679:2021 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)
  • UNE-EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
  • UNE-EN 60404-11:2013 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip (Endorsed by AENOR in March of 2013.)
  • UNE-EN 1388-2:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
  • UNE-EN ISO 18830:2018 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer (ISO 18830:2016)

Professional Standard - Forestry, Quickly measure the surface area of a material

  • LY/T 2030-2012 Technical regulation of rapid measurement of leaf area index in natural deciduous forests based on leaf litter collection
  • LY/T2030-2012 Technical regulation of rapid measurement of leaf area index in natural deciduous forests based on leaf litter collection

Japanese Industrial Standards Committee (JISC), Quickly measure the surface area of a material

  • JIS K 6217-7:2008 Carbon black for rubber industry -- Fundamental characteristics -- Part 7: Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
  • JIS C 2139:2008 Solid electrical insulating materials -- Methods for the determination of volume resistivity and surface resistivity
  • JIS K 6217-7:2013 Carbon black for rubber industry -- Fundamental characteristics -- Part 7: Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
  • JIS C 2139-3-2:2018 Dielectric and resistive properties of solid insulating materials -- Part 3-2: Determination of resistive properties (DC methods) -- Surface resistance and surface resistivity
  • JIS K 7210-2:2014 Plastics.Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.Part 2: Method for materials sensitive to time-temperature history and/or moisture

RU-GOST R, Quickly measure the surface area of a material

  • GOST 25937-1983 Materials for shoes. Method for determination of specific volume and surface resistance
  • GOST R 50499-1993 Solid electrical insulating materials. Methods of test for volume resistivity and surface resistivity
  • GOST 27019-2016 Rolled polymer materials for floors. Method for rapid determination of sound-insulation properties
  • GOST 6943.16-1994 Textile glass. Woven fabrics. Non-woven cloth. Methods for determination of mass per unit area
  • GOST 26028-1983 Dark-coloured raw material for surfactants. Method of determination of an acid value
  • GOST 28794-1990 Reagents. Method for the determination of specific surface of chromatographic materials by thermal desorption
  • GOST 25698-1998 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness
  • GOST 25698-1983 Powder articles. Methods of determination of hardness
  • GOST EN 1849-1-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Methods for determination of thickness and mass per unit area
  • GOST R 57930-2017 Polymer composites. Determination of surface profile at exposure in climatic conditions through 3D microscopy

CEN - European Committee for Standardization, Quickly measure the surface area of a material

  • EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures
  • EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test@ large-area indenter
  • EN ISO 6272-2:2006 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test@ small-area indenter
  • EN ISO 18830:2017 Plastics - Determination of aerobic biodegradation of nonfloating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer
  • EN ISO 19679:2017 Plastics - Determination of aerobic biodegradation of nonfloating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide

Universal Oil Products Company (UOP), Quickly measure the surface area of a material

  • UOP 964-2011 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption

Korean Agency for Technology and Standards (KATS), Quickly measure the surface area of a material

  • KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
  • KS M ISO 6272-1:2010 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 1:Falling-weight test, large-area indenter
  • KS M ISO 6272-2:2008 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 2:Falling-weight test, small-area indenter
  • KS M ISO 6272-2:2013 Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
  • KS M ISO 6272-1:2013 Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
  • KS B ISO 10250:2003 Metallic materials－Hardness testing－Tables of Knoop hardness values for use in tests made on flat surfaces
  • KS M ISO 2286-2-2017(2022) Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs
  • KS C IEC 60093:2004 Methods of test for volume resistivity and surface resistivity of solid electric insulating materials
  • KS L ISO 3374-2003(2018) Reinforcement products－Mat and fabics－Determination of mass per unit area
  • KS D ISO 1460-2002(2022) Hot dip galvanized coating on ferrous materials - Gravimetric determination of the mass per unit area
  • KS D ISO 3892-2002(2022) Conversion coatings on metallic materials－Determination of coating mass per unit area－Gravimetric methods
  • KS D ISO 4498-2-2001(2006) Sintered metal materials, excluding hardmetals-Determination of apparent hardness-Part 2：Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
  • KS D ISO 1460-2002(2017) Hot dip galvanized coating on ferrous materials - Gravimetric determination of the mass per unit area
  • KS D ISO 3892-2002(2017) Conversion coatings on metallic materials－Determination of coating mass per unit area－Gravimetric methods
  • KS D ISO 3892:2002 Conversion coatings on metallic materials－Determination of coating mass per unit area－Gravimetric methods
  • KS P ISO 21530:2018 Dentistry — Materials used for dental equipment surfaces — Determination of resistance to chemical disinfectants
  • KS D ISO 1460:2002 Hot dip galvanized coating on ferrous materials - Gravimetric determination of the mass per unit area
  • KS P ISO 21530:2012 Dentistry－Materials used for dental equipment surfaces－Determination of resistance to chemical disinfectants
  • KS C IEC 60343:2002 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
  • KS M ISO 1133-2-2016(2021) Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
  • KS D ISO 14606:2003 Surface chemical analysis－Sputter depth profiling－Optimization using layered systems as reference materials
  • KS E ISO 7194-1:2018 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
  • KS C IEC 60404-11:2002 Magnetic materials-Part 11:Methods of test for thedetermination of surface insulation resistance of magnetic sheet and strip
  • KS C IEC 60343-2002(2022) Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
  • KS K ISO 9864-2007(2022) Geosynthetics－Test method for the determination of mass per unit area of geotextiles and geotextile-related products
  • KS C IEC 60404-11:2017 Magnetic materials－Part 11：Methods of test for thedetermination of surface insulation resistance of magnetic sheet and strip
  • KS F 2446-2020 Standard test method for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
  • KS M ISO 11125-4-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 4：Determination of apparent density
  • KS D ISO 4498-1-2001(2006) Sintered metal materials, excluding hardmetals-Determination of apparent hardness－Part 1：Materials of essentially uniform section hardness
  • KS M ISO 8503-5:2018 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determinat
  • KS C IEC 62631-3-2:2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
  • KS C IEC 62631-3-2-2017(2022) Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity

KR-KS, Quickly measure the surface area of a material

  • KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
  • KS P ISO 21530-2018 Dentistry — Materials used for dental equipment surfaces — Determination of resistance to chemical disinfectants
  • KS E ISO 7194-1-2018 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
  • KS M ISO 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
  • KS C IEC 60404-11-2017 Magnetic materials－Part 11：Methods of test for thedetermination of surface insulation resistance of magnetic sheet and strip
  • KS M ISO 8503-5-2018 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determinat
  • KS C IEC 62631-3-2-2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity

SE-SIS, Quickly measure the surface area of a material

  • SIS SS IEC 93:1983 Methods of test for volume résistivity and surface resistivityof solid electrical insulating materials
  • SIS SS-ISO 3892:1983 Conversion coatings on metallic ma- terials - Determination of coating m?ss per unit area - Gravimetric methods
  • SIS SS IEC 343:1982 Recommended test methods for determining the relative resistance of insulating materials to break-down by surface discharges

HU-MSZT, Quickly measure the surface area of a material

Electrostatic Discharge Association (ESDA), Quickly measure the surface area of a material

ESD - ESD ASSOCIATION, Quickly measure the surface area of a material

  • STM11.12-2007 Volume Resistance Measurement of Static Dissipative Planar Materials
  • STM11.12-2015 Volume Resistance Measurement of Static Dissipative Planar Materials
  • STM11.11-2001 Surface Resistance Measurement of Static Dissipative Planar Materials
  • STM11.11-2006 SURFACE RESISTANCE MEASUREMENT OF STATIC DISSIPATIVE PLANAR MATERIALS
  • STM11.11-2015 SURFACE RESISTANCE MEASUREMENT OF STATIC DISSIPATIVE PLANAR MATERIALS
  • STM11.12-2000 Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items - Volume Resistance Measurements of Static Dissipative Planar Materials

Standard Association of Australia （SAA）, Quickly measure the surface area of a material

  • AS/NZS 4257.3:1994 Plastic roof and wall cladding materials - Methods of test - Determination of mass per unit area of sheet
  • AS 2836.3:1998 Methods of testing surgical dressing and surgical dressing materials - Method for the determination of mass per unit area
  • AS 1157.5:1998 Methods of testing materials for resistance to fungal growth - Resistance of timber to surface fungal growth
  • AS 2836.7:1998 Methods of testing surgical dressings and surgical dressing materials - Method for the determination of level of surface-active substances
  • AS 1157.11:1999 Methods of testing materials for resistance to fungal growth - Resistance of rubbers and plastics to surface fungal growth
  • AS 1774.5:2014 Refractories and refractory materials — Physical test methods, Method 5: Determination of bulk density, apparent porosity and true porosity (ISO 5017:2013, MOD)
  • AS 3558.4:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to surface scratching
  • AS 1157.3:1999 Methods of testing materials for resistance to fungal growth - Resistance of cordage and yarns to fungal growth
  • AS 1157.7:1999 Methods of testing materials for resistance to fungal growth - Resistance of papers and paper products to surface fungal growth
  • AS 3558.23:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to heat of the surface of sinks
  • AS 3558.24:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to hot liquids of the surface of sinks

European Committee for Standardization (CEN), Quickly measure the surface area of a material

  • EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
  • EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
  • EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017)
  • EN 10282:2001 Magnetic Materials - Method of Test for the Determination of Surface Insulation Resistance of Electrical Sheet and Strip
  • EN 1890:2006 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
  • EN 1890:1999 Surface Active Agents - Determination of Cloud Point of Non-Ionic Surface Active Agents Obtained by Condensation of Ethylene Oxide
  • EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
  • EN ISO 3892:1994 Conversion Coatings on Metallic Materials - Determination of Coating Mass per Unit Area - Gravimetric Methods (ISO 3892 : 1980)
  • EN 14196:2016 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
  • EN 12582:1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
  • EN 13892-6:2002 Methods of test for screed materials - Part 6: Determination of surface hardness
  • EN ISO 1460:2020 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020)
  • EN ISO 3892:2001 Conversion Coatings on Metallic Materials - Determination of Coating Mass Per Unit Area - Gravimetric Methods ISO 3892:2000
  • EN ISO 19679:2020 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)
  • EN ISO 1460:1994 Metallic Coatings - Hot Dip Galvanized Coatings on Ferrous Materials - Gravimetric Determination of the Mass per Unit Area (ISO 1460:1992)
  • EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
  • prEN 24498-1-1992 Sintered metal materials, excluding hardmetals; determination of apparent hardness; part 1: materials of essentially uniform section hardness (ISO 4498-1:1990)
  • EN ISO 21530:2004 Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004)
  • EN ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
  • EN 1388-2:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware

PT-IPQ, Quickly measure the surface area of a material

RO-ASRO, Quickly measure the surface area of a material

  • STAS 6107-1981 SOLID ELECTRICAL INSULATING MATERIALS Methods of test for volume and sur- face resistivity and of insution resistance
  • SR ISO 4498-2:1996 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
  • STAS SR ISO 1460:1994 Metallic coatings. Het dip galvanized coatings on ferrous materials. Gravimetric determination of. the mass per unit area
  • STAS 10369-1975 SOLID ELECTRICAL INSULATING MATERIALS Test methods for determining the relative resistance to breakdown by surface discharges

BE-NBN, Quickly measure the surface area of a material

  • NBN S 22-015-1985 Textile glass - Woven fabrics - Determination of mass per unit area
  • NBN T 03-482-1988 Carbonaceous materials forthe production of aluminium - Calcined coke - Determination of apparent oil content - Heating method
  • NBN EN ISO 3892:1995 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:1980)
  • NBN EN ISO 1460:1995 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992)
  • NBN-EN 60343-1993 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges

Lithuanian Standards Office , Quickly measure the surface area of a material

  • LST HD 429 S1-2002 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093:1980)
  • LST CEN/TS 17510-2020 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption
  • LST EN ISO 2286-2:2000 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998)
  • LST EN ISO 3892:2002 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000)
  • LST EN 13892-6-2003 Methods of test for screed materials - Part 6: Determination of surface hardness
  • LST EN 10282-2002 Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip
  • LST EN 1007-3-2003 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area
  • LST EN 14196-2004 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
  • LST EN 16057-2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
  • LST EN ISO 21530:2004 Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004)
  • LST EN 1388-2-2000 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware

Association of German Mechanical Engineers, Quickly measure the surface area of a material

  • VDI 3405 Blatt 2.1-2015 Additive manufacturing processes, rapid manufacturing - Laser beam melting of metallic parts; Material data sheet aluminium alloy AlSi10Mg

AT-ON, Quickly measure the surface area of a material

  • ONR CEN/TS 17510-2021 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption
  • ONORM B 3825-2002 Behaviour of equipment materials in fire - Testing of upholstery fabrics

FI-SFS, Quickly measure the surface area of a material

Professional Standard - Light Industry, Quickly measure the surface area of a material

  • QB/T 4448-2013 Determination of peel strength of flexible overlaid materials in furniture surface
  • QB/T 4449-2013 Determination of peel strength of rigid overlaid materials in furniture surface
  • QB/T 3655-1999 Determination of peel strength of soft cladding materials on furniture surfaces
  • QB/T 3656-1999 Determination of peel strength of hard cladding materials on furniture surfaces
  • QB/T 4969-2016 Surface active agents.Determination of cationic surfactant in raw materials and formulated products.Potentiometric titration method
  • QB/T 4970-2016 Surface active agents.Determination of anionic surfactant in raw materials and formulated products.Potentiometric titration method

IL-SII, Quickly measure the surface area of a material

  • S.I.692 Pt.102-1971 TESTING OF CLEANING MATF IALS BASED ON SYNTHETIC SURFACE ACTIVE AGENTS: TEST FOR TYPE OF SURFACE ACTIVE AGENT
  • S.I.692-1972 TESTING OF CLEANING MATERIALS BASED ON SYNTHETIC SURFACE ACTIVE AGENTS: DETERMINATION OF NON-IONIC SURFACE ACTIVE AGENT

Hebei Provincial Standard of the People's Republic of China, Quickly measure the surface area of a material

  • DB13/T 2768.4-2018 Graphene powder material detection method part 4: specific surface area, pore volume and pore diameter BET method

Danish Standards Foundation, Quickly measure the surface area of a material

  • DS/EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
  • DS/EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
  • DS/EN ISO 2286-2:1999 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
  • DS/IEC 93:1982 Methods of test for volume resistivity of solid electrical insulating materials
  • DS/EN ISO 3892:2001 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
  • DS/EN ISO 3892:1995 Conversion coatings on metallic materials - Determination of coating mass per unit area- Gravimetric methods
  • DS/ISO 3892:1983 Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods
  • DS/EN 13892-6:2003 Methods of test for screed materials - Part 6: Determination of surface hardness
  • DS/ISO 1460:1980 Metallic coatings. Hot dip galvanized coatings on ferrous materials. Determination of the mass per unit area. Gravimetric method
  • DS/EN 1007-3:2003 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area
  • DS/EN ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test)
  • DS/EN 60404-11:2013 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
  • DS/EN ISO 21530:2004 Dentistry - Materials used for dental equipment surfaces - Determinaton of resistance to chemical disinfectants
  • DS/EN 14196:2004 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
  • DS/EN ISO 1460:1996 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
  • DS/EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
  • DS/EN 24498-1:1994 Sintered metal materials,excluding hardmetals-Determination of apparent hardness-Part 1:Materials of essentially uniform section hardness
  • DS/EN 1388-2:1996 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
  • DS/EN IEC 60404-11:2021 Magnetic materials – Part 11: Methods of measurement of the surface insulation resistance of electrical steel strip and sheet

Canadian General Standards Board （CGSB), Quickly measure the surface area of a material

  • CGSB 1-GP-71 METH 122.6-1979 Methodes D'Essai Des Peintures Et Pigments Vieillissement Accelere Essai De Deux Couches De Produit Sechant A L'Air Sur Des Plaques En Acier
  • CGSB 1-GP-71 METH 122.7-1980 Methods of Testing Paints and Pigments Accelerated Weathering Test for Two Coats of Baking Material on Steel Panels
  • CGSB 1-GP-71 METH 122.9-1979 Methodes D'Essai Des Peintures Et Pigments Vieillissement Accelere Essai D'Une Couche De Produit Sur Des Plaques En Acier Revetues D'Une Couche Primaire
  • CGSB 1-GP-71 METH 122.8-1979 Methods of Testing Paints and Pigments Accelerated Weathering Test for One Coat of Air-Drying Material on Steel or Aluminum Panels
  • CGSB 1-GP-71 METH 143.9-1978 Methodes D'Essai Des Peintures Et Pigments Resistance A Long Terme A L'Exterieur Essai De Peinture Primaire Aux Resines Alkydes Appliquee Sur Du Bois
  • CGSB 1-GP-71 METH 143.12-1974 Methodes D'Essai Des Peintures Et Pigments Comportement A Long Terme A L'Exterieur Deux Couches De Teinture Exterieure Sur Bois

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Quickly measure the surface area of a material

YU-JUS, Quickly measure the surface area of a material

  • JUS C.A6.050-1989 Converslou coatlngs trn metal11c materlals. Determinat ion of coating mass per unit area. Gravimotric metbods
  • JUS C.A4.055-1987 Mechanical testing of meta/s. Determination of apparent hardness ofs/nteres metal materials, excluding hardmeta/s. Case-hardened ferrous materials, surface enriched bycarbon orcarbon and nitrogen

American National Standards Institute （ANSI), Quickly measure the surface area of a material

  • ANSI/ESD STM11.12-2021 The Protection of Electrostatic Discharge Susceptible Items - Volume Resistance Measurement of Planar Materials
  • ANSI/ESD STM11.11-2021 The Protection of Electrostatic Discharge Susceptible Items - Surface Resistance Measurement of Planar Materials
  • ANSI/ASTM E162:2021 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ANSI/ESD STM11.11-1993 ESD Association Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items - Surface Resistance Measurement of Static Dissipative Planar Materials
  • ANSI/ASTM D3675:2001 Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

ES-AENOR, Quickly measure the surface area of a material

GM North America, Quickly measure the surface area of a material

  • GM9522P-2007 Quick Knife Adhesion Test for Stationary Glass Bonding Materials to Paint [Replaced By: GMW GMW3368]

European Committee for Electrotechnical Standardization（CENELEC）, Quickly measure the surface area of a material

  • HD 429 S1-1983 Methods of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials
  • EN 60404-11:2013 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
  • EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity

未注明发布机构, Quickly measure the surface area of a material

  • ISO 3982:2000 Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods
  • BS EN 1388-2:1996(2004) Materials and articles in contact with foodstuffs — Silicate surfaces — Part 2 : Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
  • BS EN ISO 18830:2017(2018) Plastics - Determination of aerobic biodegradation of non - floating plastic materials in a seawater / sandy sediment interface - Method by measuring the oxygen demand in closed respirometer

Underwriters Laboratories (UL), Quickly measure the surface area of a material

  • UL 1709 BULLETINS-2006 UL Standard for Safety Rapid Rise Fire Tests of Protection Materials for Structural Steel (12/22/2006 (2p); 10/20/2006 (2p))
  • UL 2821-2013 Greenguard - Certification Program Method for Measuring and Evaluating Chemical Emissions From Building Materials, Finishes and Furnishings

NATO - North Atlantic Treaty Organization, Quickly measure the surface area of a material

  • AFAP-4-2005 NATO REACTION-TO-FIRE TESTS FOR MATERIALS SURFACE SPREAD OF FLAME (ED 2)
  • AFAP-4-2010 NATO REACTION-TO-FIRE TESTS FOR MATERIALS SURFACE SPREAD OF FLAME (ED 3)
  • AFAP-4-2004 NATO REACTION-TO-FIRE TESTS FOR MATERIALS SURFACE SPREAD OF FLAME (ED 1)

ZA-SANS, Quickly measure the surface area of a material

  • SANS 3892:2000 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Quickly measure the surface area of a material

  • GB/T 34689-2017 Digital printing materials—Computer direct plate-making plate(CTP Plate)—Test of unit area mass of oxidation layer
  • GB/T 3682.2-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture

International Electrotechnical Commission (IEC), Quickly measure the surface area of a material

  • IEC 62788-7-3:2022 Measurement procedures for materials used in photovoltaic modules - Part 7-3: Accelerated stress tests - Methods of abrasion of PV module external surfaces
  • IEC 60404-11:2012 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
  • IEC 60404-11:1991 Magnetic materials; part 11: method of test for the determination of surface insulation resistance of magnetic sheet and strip
  • IEC 60404-11:2021 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
  • IEC 60404-11:1991+AMD1:1998+AMD2:2012 CSV Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
  • IEC 60343:1991 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
  • IEC 62631-3-2:2015 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity

Professional Standard - Commodity Inspection, Quickly measure the surface area of a material

  • SN/T 2896-2011 Food contact materials for export. Metal materials. Determination of phenol in coating. High performance liquid chromatography
  • SN/T 2897-2011 Food contact materials for export. Metal materials. Determination of epichlorohydrin in coating. Gas chromatography
  • SN/T 2898-2011 Food contact materials for export-Metal materials.Determination the migration of vinyl chloride in surface coat.Gas chromatography mass spectrometry

Professional Standard - Medicine, Quickly measure the surface area of a material

(U.S.) Ford Automotive Standards, Quickly measure the surface area of a material

  • FORD FLTM BN 106-01-2001 DETERMINATION OF WEIGHT PER UNIT AREA AND DENSITY OF TRIM MATERIALS Replaces FLTM BN 006-01, FLTM EU-BN 006-01
  • FORD FLTM BN 106-1-2001 DETERMINATION OF WEIGHT PER UNIT AREA AND DENSITY OF TRIM MATERIALS (Replaces FLTM BN 006-01, FLTM EU-BN 006-01)

Institute of Electrical and Electronics Engineers (IEEE), Quickly measure the surface area of a material

  • NFPA (Fire) 255 NFPA 255: Standard Method of Test of Surface Burning Characteristics of Building Materials, 2006 Edition

The American Road & Transportation Builders Association, Quickly measure the surface area of a material

  • AASHTO T 80-2008 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

General Motors do Brasil, Quickly measure the surface area of a material

  • GMSA LTP .PE.118-2011 Procedure for determining blocking characteristics of vinyl and trim materials Determina莽茫o da caracter铆stica de colamento de superf铆cie de pl谩sticos laminados e materiais similares Do Not use on New Programs; No Replacement

AT-OVE/ON, Quickly measure the surface area of a material

  • OVE EN IEC 62788-7-3:2021 Measurement procedures for materials used in photovoltaic modules - Part 7-3: Environmental exposures - Accelerated abrasion tests of PV module external surfaces (IEC 82/1838/CDV) (english version)

VN-TCVN, Quickly measure the surface area of a material

  • TCVN 7665-2007 Metallic coatings.Hot dip galvanized coatings on ferrous materials.Gravimetric determination of the mass per unit area

NL-NEN, Quickly measure the surface area of a material

  • NEN 2873-1982 Testing of stony materials - Skid-resistance apparatus according Leroux and determination of surf ace frictional properties

Professional Standard - Machinery, Quickly measure the surface area of a material

  • JB/T 3282-1999 Test methods for determining the relative resistance of insulating meterials to breardown by surface discharges

Guangdong Provincial Standard of the People's Republic of China, Quickly measure the surface area of a material

  • DB44/T 1232-2013 Test Method for Determination of Surface Tension of Solid Coatings, Substrates, and Pigments Contact Angle Method

AASHTO - American Association of State Highway and Transportation Officials, Quickly measure the surface area of a material

  • T 166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Twentieth Edition)

DE-VDA, Quickly measure the surface area of a material

  • VDA 280-1-2001 Colorimetry for motor vehicles - Colour measuring of plastic surfaces of interior materials for motor vehicles

Indonesia Standards, Quickly measure the surface area of a material

  • SNI 03-6757-2002 Test method for bulk specific gravity of compact asphalt mixture using saturated surface dry test specimens

  Quickly measure the surface area of a material.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved