ZH
RU
ES

hot and humid

hot and humid, Total:499 items.

In the international standard classification, hot and humid involves: Electricity. Magnetism. Electrical and magnetic measurements, Technical product documentation, Plastics, Capacitors, Switchgear and controlgear, Paints and varnishes, Power transmission and distribution networks, TESTING, Lubricants, industrial oils and related products, Furniture, Environmental testing, Test conditions and procedures in general, Heat pumps, Sewing machines and other equipment for the clothing industry, Rubber, Sterilization and disinfection, Construction materials, Textile machinery, Leather technology, Electrical accessories, Reinforced plastics, Protection of and in buildings, Products of the textile industry, Heat recovery. Thermal insulation, Solar energy engineering, Medical sciences and health care facilities in general, Shipbuilding and marine structures in general, Electrical and electronic testing, Farming and forestry, Pharmaceutics, Horology, Aerospace electric equipment and systems, Coatings and related processes used in aerospace industry, Vocabularies, Linear and angular measurements, Thermodynamics and temperature measurements, Products of non-ferrous metals, Insulating materials, WOOD TECHNOLOGY, Fibre optic communications, Packaging and distribution of goods in general, Semiconducting materials, Adhesives, Farm buildings, structures and installations, Surface treatment and coating, Clothes, Paper and board, Air quality, Ergonomics, Telecontrol. Telemetering, Optics and optical measurements, Rectifiers. Convertors. Stabilized power supply, Raw materials for rubber and plastics, Magnetic materials, Road vehicle systems, Electrical engineering in general, Quantities and units, Optical equipment, Organic chemicals, Components and accessories for telecommunications equipment, Fishing and fish breeding, Rotating machinery, Equipment for the chemical industry, Structures of buildings, Electromechanical components for electronic and telecommunications equipment, Fruits. Vegetables, Glass, Aircraft and space vehicles in general, Burners. Boilers, Elements of buildings, On-board equipment and instruments.


CZ-CSN, hot and humid

Professional Standard - Electron, hot and humid

  • SJ/T 10185-1991 Damp heat testing equipment,type Y61
  • SJ 2330-1983 Generic specification for humidity test chambers
  • SJ/T 31388-1994 Requirements of readiness and methods of inspection and assessment for high/low temperature moisture-heat test chambers
  • SJ 20115.4-1992 Environmental conditions and test methods for aircraft radar.Humidity/heat alteration test
  • SJ/Z 9001.36-1987 Basic environmental testing procedures--Part 2: Tests--Guidance for damp heat tests
  • SJ/Z 9001.5-1987 Basic environmental testing procedures--Part 2: Tests--Test Ca: Damp heat,steady state

Group Standards of the People's Republic of China, hot and humid

  • T/YXJ 011-2021 Damp heat shaping machines
  • T/GDC 31-2019 Swimming pool constant temperature dehumidification heat pump equipment
  • T/CASME 325-2023 Testing method for performance of moist heat sterilizer
  • T/CQAP 3001-2020 Requirements for parameter release of sterile products sterilized by moist heat
  • T/CSTM 00465-2022 Test method of damp heat degradation of crystalline silicon photovoltaic cells
  • T/CACM 1385-2022 Diagnostic criteria for chronic prostatitis damp heat stasis syndrome
  • T/CNPPA 3023-2023 Application guide for moist heat sterilization bag for pharmaceutical packaging materials
  • T/IAWBS 009-2019 High Voltage Bias Steady-state Temperature Humidity Test for Power Semiconductor Devices
  • T/GZBC 50-2021 Technical specification for new energy vehicle charging equipment in subtropical damp-heat climate
  • T/GZBC 29-2020 Specification of battery electric passenger cars in subtropical damp-heat climate
  • T/ZZB 1816-2020 Moisture-absorption and heat-generating thermal pantyhose
  • T/ZZB 1634-2020 Moisture absorption and heat-generating seamless underwear

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, hot and humid

  • GB/T 10586-2006(英文版) Specifications for damp heat testing chambers
  • GB/T 1740-1979 Methods of test for resistance to heat and humidity of paint films
  • GB/T 6916-2008 Power capacitors for damp tropics
  • GB/T 1740-2007 Determination of resistance to heat and humidity of paint films
  • GB/T 6916-1997 Power capacitor for damp tropics
  • GB/T 10586-2006 Specifications for damp heat testing chambers
  • GB/T 10586-1989 Specification for damp heat test chambers
  • GB 2361-1992 Anti-rust grease damp heat test method
  • GB/T 2361-1992 Rust preventing oils and greases—Test method of wet heat
  • GB/T 4893.2-2005 Furniture-Assessment of surface resistance to wet heat
  • GB/T 14092.1-1993 Environmental condition for machinery products.Warm-damp
  • GB/T 14092.1-2009 Environmental condition for machinery products.Warm-damp
  • GB 4893.2-2005 Determination of furniture surface resistance to moisture and heat
  • GB/T 15905-1995 Rubber, vulcanized--Test method of damp heat aging
  • GB/T 4893.2-1985 Furniture--Assessment of surface resistance to wet heat
  • GB/T 14093.1-1993 Environmental technical requirements of machinery products for the warm-damp environments
  • GB/T 14093.1-2009 Environmental technical requirements of machinery products for the warm-damp environments
  • GB/T 14092.1-2023 Environmental conditions for mechanical products - part 1: heat and humidity
  • GB/T 2574-1989 Test method for resistance of glass fiber reinforced plastics to damp heat
  • GB/T 20312-2006 Hygrothermal performance of building materials and products.Determination of hygroscopic sorption properties
  • GB/T 20313-2006 Hygrothermal performance of building materials and produts. Determinaton of moisture content by drying at elevated temperature
  • GB/T 12000-1989 Plastics--Test methods of exposure to damp heat,steady state
  • GB/T 2424.2-2005 Environment tests for electric and electronic products.Guidance for damp heat tests
  • GB/T 11606.7-1989 The method of environmental test for analytical instruments--Damp heat, cyclic
  • GB/T 30801-2014 Hygrothermal performance of building materials and products.Determination of water-vapour transmission properties.Box method
  • GB/T 13125-1991 General rule for damp heat protective packaging methods of machinery products
  • GB/T 13126-2009 General specification for damp heat protective packaging of mechanical and electrical products
  • GB/T 43113-2023 Evaluation method for heat and moisture resistance of carbon fiber reinforced composite materials
  • GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
  • GB/T 13126-1991 General specification for damp heat protective packaging of machinery products
  • GB/T 12665-1990 Requirements of damp-heat testing of electrical machine for service in general environmental condition
  • GB/T 12665-2008 Requirements of damp-heat testing of electrical machine for sevice in general environmental condition
  • GB/T 12000-2003 Determination of the effects of exposure to damp heat,water spray and salt mist for plastics
  • GB/T 2424.2-1993 Basic environmental testing procedures for electric and electronic products. Guidance for damp heat tests
  • GB/T 1765-1979 Method of producing of paint films for testing heat and humidity resistance,salt-fog resistance and accelerated weathering
  • GB/T 29333-2012 Hardening films of IMD.Test method of damp heat aging
  • GB/T 22894-2008 Paper and board.Accelerated ageing.Moist heat treatment at 80℃ and 65℃ relative humidity
  • GB/T 5170.5-2008 Inspection methods for environmental testing equipments for electric and electronic products.Damp heat testing equipments
  • GB/T 12085.2-2022 Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity
  • GB 18278-2000 Sterilization of health care products--Requirements for validation and routine control--Industrial moist heat sterilization
  • GB/T 12085.2-2010 Optics and optical instruments.Enviromental test methods.Part 2:Cold,heat,humidity
  • GB/T 34561-2017(英文版) Photovoltaic(PV) glass—Test method and performance evaluation of exposure to damp heat outdoor environment
  • GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products. Test Db:Damp heat,cyclic

Association Francaise de Normalisation, hot and humid

  • NF P50-765*NF EN 13009:2000 Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient
  • NF T51-197:1980 PLASTICS. GUIDE TO DAMP HEAT TESTS.
  • NF T51-162:1980 PLASTICS. METHOD OF EXPOSURE TO DAMP HEAT.
  • NF EN 12721/IN1:2013 Ameublement - Évaluation de la résistance de la surface à la chaleur humide
  • NF EN 12721+A1:2013 Ameublement - Évaluation de la résistance de la surface à la chaleur humide
  • NF D60-051-2:2009 Furniture - Assessment of surface resistance to wet heat.
  • NF D60-051-2/IN1*NF EN 12721/IN1:2013 Furniture - Assessment of surface resistance to wet heat
  • NF D60-051-2*NF EN 12721+A1:2013 Furniture - Assessment of surface resistance to wet heat
  • NF D60-051-2:1997 Furniture. Assessment of surface resistance to wet heat.
  • NF C20-403:1990 Environmental Testings Test Methods Guidance for Damp Heat Tests
  • NF P50-758*NF EN ISO 12571:2021 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties
  • NF EN ISO 12570:2000 Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination du taux d'humidité par séchage à chaud
  • NF EN ISO 12571:2021 Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination des propriétés de sorption hygroscopique
  • NF L16-109:1992 Aerospace series. Paints and varnishes. Resistance to damp heat.
  • NF T51-162*NF EN ISO 4611:2011 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist.
  • NF Q03-026:1987 Paper and board. Accelerated ageing. Moist heat treatment at 90 degrees C and at 25 per cent relative humidity.
  • NF X35-204:1997 Hot environments. Analytical determination and interpretation of thermal stress using calculation of required sweat rate.
  • NF C20-778:2002 Environmental testing - Part 2-78 : tests - Test Cab : damp heat, steady state.
  • NF CEN ISO/TS 17665-2:2009 Stérilisation des produits de santé - Chaleur humide - Partie 2 : directives relatives à l'application de l'ISO 17665-1
  • NF C20-700-2-78*NF EN 60068-2-78:2013 Environmental Testing - Part 2-78 : tests - Test Cab : damp heat, steady state
  • NF EN 13009:2000 Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination du coefficient d'expansion hydrique
  • NF EN ISO 9346:2007 Performance hygrothermique des bâtiments et des matériaux pour le bâtiment - Grandeurs physiques pour le transfert de masse - Vocabulaire
  • NF EN 60068-3-4:2002 Essais d'environnement - Partie 3-4 : documentation d'accompagnement et guide - Essais de chaleur humide
  • NF EN 15026:2008 Performance hygrothermique des composants et parois de bâtiments - Évaluation du transfert d'humidité par simulation numérique
  • NF C93-840-1-50:2002 Optical fibres - Part 1-50 : measurement methods and test procedures - Damp heat (steady state).
  • NF C20-403-4*NF EN 60068-3-4:2002 Environmental testing - Part 3-4 : supporting documentation and guidance - Damp heat tests
  • NF C20-703:1986 Basic environmental testing procedures. Test methods. Test Ca : damp heat, steady state.
  • NF C93-840-1-50*NF EN 60793-1-50:2018 Optical fibres - Part 1-50 : measurement methods and test procedures - Damp heat (steady state) tests
  • NF EN 60068-2-78:2013 Essais d'environnement - Partie 2-78 : essais - Essai Cab : chaleur humide, essai continu
  • NF P50-755*NF EN ISO 15148:2003 Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion.
  • NF S98-105-2*NF CEN ISO/TS 17665-2:2009 Sterilization of health care products - Moist heat - Part 2 : guidance on the application of ISO 17665-1.
  • NF EN ISO 15148:2003 Performance hygrothermique des matériaux et produits pour le bâtiment - - Détermination du coefficient d'absorption d'eau par immersion partielle
  • NF EN ISO 11138-3:2017 Stérilisation des produits de santé - Indicateurs biologiques - Partie 3 : indicateurs biologiques pour la stérilisation à la chaleur humide
  • NF P50-763*NF EN ISO 12572:2016 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method
  • NF EN 60793-1-50:2018 Fibres optiques - Partie 1-50 : méthodes de mesure et procédures d'essai - Essais de chaleur humide (état continu)
  • NF EN ISO 12572:2016 Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination des propriétés de transmission de la vapeur d'eau - Méthode de la coupelle
  • NF EN ISO 12570/A1:2013 Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination du taux d'humidité par séchage à chaud - Amendement 1
  • FD Q03-035-3*FD ISO/DIS 5630-3:1995 Paper and board. Accelerated ageing. Part 3 : moist heat treatment at 80 degrees celcius and 65 per cent relative humidity.
  • NF G07-167*NF ISO 18782:2016 Textiles - Determination of dynamic hygroscopic heat generation
  • NF EN ISO 15758:2014 Performance hygrothermique des équipements de bâtiments et installations industrielles - Calcul de la diffusion de vapeur d'eau - Systèmes d'isolation de tuyauteries froides
  • NF P50-754*NF EN ISO 12570:2000 Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature

RO-ASRO, hot and humid

Professional Standard - Machinery, hot and humid

  • JB/T 832-1998 Tropicalized type electric apparatus
  • JB/T 8634-1997 Humid tropics type electric control unit housing electronic components
  • JB/T 7501-1994 Organic coatings for typical mechanical products intended to be used in damp and hot environment Technical conditions
  • JB/T 9444.4-1999 Basic environmental testing method of copying machines - Test C: Steady damp heat test
  • JB/T 9444.5-1999 Basic environmental testing method of copying machines - Test D: Cyclic damp heat test
  • JB/T 7574-1994 Guideline for weather exposure test method for mechanical products and components in damp and heat environment
  • JB/T 7574-2013 Tests and guidance of atmospheic exposure of warm-damp environment for machinery products and parts

Professional Standard - Military and Civilian Products, hot and humid

工业和信息化部/国家能源局, hot and humid

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., hot and humid

  • ASHRAE 90420-2008 The ASHRAE Guide for Buildings in Hot and Humid Climates
  • ASHRAE CH-03-9-3-2003 Whole Building Hygrothermal Simulation Model
  • ASHRAE HI-02-21-5-2002 Study on Cross-Ventilation with Radiational Panel Cooling for Hot and Humid Regions
  • ASHRAE TO-98-22-2-1998 Hygrothermal Performance of a New Light Gauge Steel-Framed Envelope System
  • ASHRAE DA-07-033-2007 Evaluating Stucco-Clad Building Wall Systems through Hygrothermal Modeling
  • ASHRAE 90442-2009 ASHRAE Guide for Buildings in Hot and Humid Climates@ Expanded with New Content (Second Edition)
  • ASHRAE 3829-1994 Field Experiments on Occupant Comfort and Office Thermal Environments in a Hot-Humid Climate
  • ASHRAE 4770-2005 Energy Performances of Prototype VAV and CAV Systems under Simulated Humid Tropical Climates
  • ASHRAE TO-98-13-3-1998 Boundary Element Analysis of Uncoupled Quasi-Static Hygrothermoelasticity for Two-Dimensional Composite Walls
  • ASHRAE 4453-2001 Wetting Coatings for Dehumidifying Heat Exchangers (International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research)
  • ASHRAE TO-98-13-2-1998 Prediction of Hygrothermal Performance of Building Envelope Parts Coupled with Indoor Climate
  • ASHRAE 4282-1999 Investigation of Thermal Comfort at High Humidities (RP-860)

Professional Standard - Light Industry, hot and humid

Professional Standard - Urban Construction, hot and humid

  • CJ/T 528-2018 Swimming pool dehumidification heat recovery heat pump

British Standards Institution (BSI), hot and humid

  • BS EN 12721:2009+A1:2013 Furniture - Assessment of surface resistance to wet heat
  • BS EN 12721:1997 Furniture - Assessment of surface resistance to wet heat
  • BS EN 12721:2009 Furniture - Assessment of surface resistance to wet heat
  • BS ISO 4211-2:2013 Furniture. Tests for surface finishes. Assessment of resistance to wet heat
  • DD CEN ISO/TS 17665-2:2009 Sterilization of health care products. Moist heat. Guidance on the application of ISO 17665-1
  • PD IEC TR 63141:2020 Damp heat, steady state (unsaturated pressurized vapour with air)
  • BS EN ISO 12571:2013 Hygrothermal performance of building materials and products. Determination of hygroscopic sorption properties
  • BS EN 60068-2-78:2013 Environmental testing. Tests. Test Cab: Damp heat, steady state
  • BS EN 60068-3-4:2002 Environmental testing. Supporting documentation and guidance. Damp heat tests
  • BS EN IEC 60068-3-4:2023 Environmental testing - Supporting documentation and guidance. Damp heat tests
  • BS EN 2591-303:1998 Elements of electrical and optical connection - Test methods - Cold/low pressure and damp heat
  • BS EN 2591-304:1998 Elements of electrical and optical connection - Test methods - Damp heat steady state
  • BS EN 2591-321:1998 Elements of electrical and optical connection - Test methods - Damp heat, cyclic test
  • BS EN 60793-1-50:2015 Tracked Changes. Optical fibres. Measurement methods. Damp heat (steady state) tests
  • BS EN 60068-2-78:2002 Environmental testing - Test methods - Test Cab - Damp heat, steady state
  • BS EN ISO 4611:2011 Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
  • BS EN 60793-1-50:2002 Optical fibres. Measurement methods and test procedures. Damp heat (steady state)
  • BS 2011 Pt.2.2C and D:1990 Environmental testing. Guidance. Tests C & D. Guidance for damp heat tests
  • BS EN ISO 4611:2010 Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
  • 18/30376688 DC PD IEC/TS 63141. Damp heat, steady state (unsaturated pressurized vapour with air)
  • BS EN ISO 12571:2021 Tracked Changes. Hygrothermal performance of building materials and products. Determination of hygroscopic sorption properties
  • 20/30407360 DC BS EN ISO 12571. Hygrothermal performance of building materials and products. Determination of hygroscopic sorption properties
  • 21/30432304 DC BS EN ISO 12571. Hygrothermal performance of building materials and products. Determination of hygroscopic sorption properties
  • BS EN ISO 4611:2008 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
  • BS 6388-3:1996 Accelerated ageing of paper and board. Method for moist heat treatment at 80°C and 65% relative humidity
  • BS ISO 9022-18:1995 Optics and optical instruments. Environmental test methods. Combined damp heat and low internal pressure
  • BS EN 50289-4-7:2008 Communication cables — Specifications for test methods — Part 4-7: Environmental test methods — Damp heat, steady state
  • 20/30405469 DC BS ISO 24353 AMD1. Hygrothermal performance of building materials and products. Determination of moisture adsorption/desorption properties in response to humidity variation
  • BS EN 554:1994 Sterilization of medical devices - Validation and routine control of sterilization by moist heat
  • BS EN 60068-2-66:1995 Environmental testing. Test methods. Test Cx. Damp heat, steady state (unsaturated pressurized vapour)
  • BS EN ISO 9346:2007 Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary
  • BS EN ISO 12570:2000+A2:2018 Hygrothermal performance of building materials and products. Determination of moisture content by drying at elevated temperature
  • BS EN 60512-11-12:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11m - Damp heat, cyclic
  • BS EN 2591-6303:2001 Elements of electrical and optical connection. Test methods - Optical elements. Cold/low pressure and damp heat
  • BS EN ISO 15148:2002+A1:2016 Hygrothermal performance of building materials and products. Determination of water absorption coefficient by partial immersion
  • BS EN 16383:2016 Thermal insulation products for building applications. Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS)
  • BS ISO 24353:2008+A1:2021 Hygrothermal performance of building materials and products. Determination of moisture adsorption/desorption properties in response to humidity variation
  • BS EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
  • BS EN 60068-2-67:1996+A1:2019 Environmental testing - Tests. Test Cy. Damp heat, steady state, accelerated test primarily intended for components
  • ISO 18782:2023 Textiles. Determination of dynamic hygroscopic heat generation
  • BS EN 2591:6303:2001 Elements of electrical and optical connection - Test methods - Optical elements - Cold/low pressure and damp heat
  • BS EN ISO 11138-3:2006 Sterilization of health care products - Biological indicators - Biological indicators for moist heat sterilization processes
  • BS EN ISO 11138-3:2009 Sterilization of health care products - Biological indicators - Biological indicators for moist heat sterilization processes

National Metrological Verification Regulations of the People's Republic of China, hot and humid

German Institute for Standardization, hot and humid

  • DIN EN 12721:2014-02 Furniture - Assessment of surface resistance to wet heat; German version EN 12721:2009+A1:2013
  • DIN 68861-8:2001 Furniture surfaces - Part 8: Behaviour on subjection to wet heat
  • DIN 68861-8:2001-04 Furniture surfaces - Part 8: Behaviour on subjection to wet heat
  • DIN EN 13009:2000 Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient; German version EN 13009:2000
  • DIN EN 13009:2000-04 Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient; German version EN 13009:2000
  • DIN 4108-4:2020 Thermal insulation and energy economy in buildings - Part 4: Hygrothermal design values
  • DIN EN ISO 4611:2011-04 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010); German version EN ISO 4611:2010
  • DIN EN 12023:1996 Self adhesive tapes - Measurement of water vapour transmission in a warm humid atmosphere; German version EN 12023:1996
  • DIN EN ISO 4611:2009 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2008); English version of DIN EN ISO 4611:2009-02
  • DIN EN 12721:2014 Furniture - Assessment of surface resistance to wet heat; German version EN 12721:2009+A1:2013
  • DIN ISO/TS 17665-2:2009-07 Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009); German version CEN ISO/TS 17665-2:2009 / Note: To be replaced by DIN EN ISO 17665 (2022-11).
  • DIN EN ISO 12571:2022-04 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2021); German version EN ISO 12571:2021
  • DIN 4108-4:2020-11 Thermal insulation and energy economy in buildings - Part 4: Hygrothermal design values
  • DIN EN ISO 12571:2020 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO/DIS 12571:2020); German and English version prEN ISO 12571:2020
  • DIN EN ISO 12572:2001 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001); German version EN ISO 12572:2001
  • DIN EN ISO 9346:2008-02 Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary (ISO 9346:2007); Trilingual version EN ISO 9346:2007
  • DIN V 4108-4/A1:2006 Thermal insulation and energy economy in buildings - Part 4: Hygrothermal design values; Amendment A1
  • DIN ISO 5630-3:1997 Paper and board - Accelerated ageing - Part 3: Moist heat treatment at 80 °C and 65 % relative humidity (ISO 5630-3:1996)
  • DIN EN ISO 12570:2018-07 Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000 + Amd 1:2013 + Amd 2:2018); German version EN ISO 12570:2000 + A1:2013 + A2:2018
  • DIN EN 15026:2022 Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation; German and English version prEN 15026:2022
  • DIN EN ISO 15148:2018-12 Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion (ISO 15148:2002 + Amd 1:2016); German version EN ISO 15148:2002 + A1:2016
  • DIN EN 16383:2017-01 Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS); German version EN 16383:2016
  • DIN EN ISO 12572:2017-05 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016); German version EN ISO 12572:2016
  • DIN EN 2591-321:1997 Aerospace series - Elements of electrical and optical connection; test methods - Part 321: Damp heat, cyclic test; German version EN 2591-321:1997

BE-NBN, hot and humid

SE-SIS, hot and humid

Lithuanian Standards Office , hot and humid

  • LST EN 12721-2009 Furniture - Assessment of surface resistance to wet heat
  • LST EN 13009-2000 Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient
  • LST EN ISO 12571:2000 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2000)
  • LST EN ISO 4611:2011 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
  • LST EN 60793-1-50-2015 Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests (IEC 60793-1-50:2014)
  • LST EN 15026-2007 Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation
  • LST EN ISO 9346:2008 Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary (ISO 9346:2007)
  • LST EN 60068-2-78-2002 Environmental testing. Part 2-78: Tests. Test Cab: Damp heat, steady state (IEC 60068-2-78:2001)
  • LST EN 60068-2-78-2013 Environmental testing -- Part 2-78: Tests - Test Cab: Damp heat, steady state (IEC 60068-2-78:2012)
  • LST EN 60793-1-50-2003 Optical fibres. Part 1-50: Measurement methods and test procedures. Damp heat (steady state) (IEC 60793-1-50:2001)
  • LST EN ISO 12572:2002 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001)
  • LST EN 60068-3-4-2003 Environmental testing. Part 3-4: Supporting documentation and guidance. Damp heat tests (IEC 60068-3-4:2001)

Professional Standard - Aviation, hot and humid

  • HB 7573-1997 Anti-moisture and heat, anti-salt spray, anti-mold coating
  • HBm 59-1987 Damp heat test method for miniature automobile instrument
  • HBm 66.49-1990 Damp heat test method for instrumentation of minivans
  • HB 5320-1993 Test method for hygrothermal aging of anaerobic adhesives for aviation
  • HB 7401-1996 Test method for moisture absorption of resin matrix composite laminates in hot and humid environment
  • HB 5830.11-1986 Airborne equipment environmental conditions and test methods damp heat
  • HB 7625-1998 Tensile test method for carbon fiber composite laminates in hot and humid environment
  • HB 7626-1998 Compression test method for carbon fiber composite laminates in hot and humid environment
  • HB 6167.4-1989 Environmental conditions and test methods for airborne equipment of civil aircraft Damp heat test
  • HB 6783.7-1993 Military airborne equipment climate environment test chamber (room) verification method damp heat test chamber (room)
  • HB 6167.4-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 4: Humidity test

AENOR, hot and humid

  • UNE-EN 12721:2009+A1:2014 Furniture - Assessment of surface resistance to wet heat
  • UNE-EN 13009:2001 Hygrothermal performance of building materials and products. Determination of hygric expansion coefficient.
  • UNE-EN 60793-1-50:2015 Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests
  • UNE-EN ISO 12571:2015 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2013)
  • UNE-EN 60068-3-4:2002 Environmental testing -- Part 3-4: Supporting documentation and guidance - Damp heat tests.
  • UNE-EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
  • UNE-EN ISO 4611:2011 Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
  • UNE 57092-4:2002 Paper and board. Accelerated ageing. Part 4: Moist heat treatment at 80 oC and 65% relative humidity.
  • UNE-CEN ISO/TS 17665-2:2009 EX Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009)
  • UNE-EN ISO 9346:2009 Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary (ISO 9346:2007)

国家能源局, hot and humid

  • NB/T 10279-2019 Hot and humid environmental conditions for power transmission and transformation equipment
  • NB/T 10478-2020 Humid and hot environmental conditions and technical requirements for dry air-core reactors
  • NB/T 31120-2017 Special humid and hot environmental conditions and technical requirements for wind power generation equipment
  • NB/T 10479-2020 Humid and hot environmental conditions and technical requirements for cross-linked cable body and accessories
  • NB/T 42136-2017 Technical requirements for anti-corrosion coatings for metal components of power grid facilities in hot and humid environments
  • NB/T 10280-2019 Humid and hot environmental conditions and technical requirements for condition monitoring devices for power grids
  • NB/T 10440-2020 Regulations for evaluation of wind turbine stator winding insulation structure resistance to moisture and heat

HU-MSZT, hot and humid

CEN - European Committee for Standardization, hot and humid

  • EN 12721:2009 Furniture - Assessment of surface resistance to wet heat (Incorporates Amendment A1: 2013)

国家市场监督管理总局、中国国家标准化管理委员会, hot and humid

  • GB/T 39548-2020 Determination of retention rate on thermal resistance of vacuum insulation panels(VIP) in hygrothermal conditions
  • GB/T 41415-2022 Textiles—Determination of dimensional change in dry heat or damp heat conditions
  • GB/T 4893.2-2020 Test of surface coatings of furniture—Part 2: Determination of resistance to wet heat
  • GB/T 37663.1-2019 Outdoor empirical test requirements for distributed photovoltaic in warm damp climate—Part 1: Photovoltaic module
  • GB/T 37663.2-2019 Outdoor empirical test requirements for distributed photovoltaic in warm damp dlimate—Part 2: Photovoltaic backsheet
  • GB/T 38924.7-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 7: Humidity test

Professional Standard - Textile, hot and humid

RU-GOST R, hot and humid

  • GOST 938.28-1977 Leather. Method of determination of hygrothermic stability
  • GOST ISO 4211-2-2012 Furniture. Tests for surfaces. Part 2. Assessment of resistance to wet heat
  • GOST 33362-2015 Plastics. Test methods of the resistance to exposure of damp heat, water spray and salt mist
  • GOST R 57695-2017 Polymer composites. Test methods for aging of sandwich construction under wet and warm
  • GOST R IEC 60068-2-78-2009 Environmental testing. Part-2-78. Tests. Test Cab: Damp heat, steady state
  • GOST R 56893-2016 Sterilization of health care products. Moist heat. Part 2. Guidance on the application of ISO 17665-1
  • GOST R IEC 60793-1-50-2015 Optical fibres. Part 1-50. Measurement methods and test procedures. Damp heat (steady state) tests
  • GOST R IEC 60068-2-30-2009 Environmental testing. Part 2-30. Tests. Test Db: Damp heat, cyclic (12 h + 12 h cycle)
  • GOST R ISO 11134-2000 Sterilization of health care products. Requirements for validation and routine control. Industrial moist heat sterilization

Japanese Industrial Standards Committee (JISC), hot and humid

  • JIS C 5023:1978 Damp heat (steady state) testing procedures for electronic componets
  • JIS C 5024:1978 Damp heat (cyclic) testing procedures for electronic components
  • JIS L 1952-1:2021 Textiles -- Determination of dynamic hygroscopic heat generation -- Part 1: Test method for maximum generated hygroscopic heat temperature measurement by humidification
  • JIS C 60068-2-28:1993 Environmental testing, Part 2: Tests -- Guidance for damp heat tests
  • JIS C 0033:1993 Environmental testing, Part 2: Tests -- Guidance for damp heat tests
  • JIS C 60068-3-4:2004 Environmental testing -- Part 3-4: Supporting documentation and guidance -- Damp heat tests
  • JIS K 7227:1998 Plastics -- Determination of the effects of exposure to damp heat, water spray and salt mist
  • JIS C 60068-2-3:1987 Basic environmental testing procedures Part 2: Tests, Test Ca: Damp heat, steady state
  • JIS P 8154-3:2008 Paper and board -- Accelerated ageing -- Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity
  • JIS L 1952-2:2021 Textiles -- Determination of dynamic hygroscopic heat generation -- Part 2: Test method for heat keeping index of generated heat by humidification
  • JIS C 0022:1987 Basic environmental testing procedures Part 2: Tests, Test Ca: Damp heat, steady state
  • JIS C 60068-2-30:1988 Basic environmental testing procedures Part 2: Tests Test Db: Damp heat, cyclic (12 + 12-Hour cycle)

Standard Association of Australia （SAA）, hot and humid

  • AS 60068.2.78:2003 Environmental testing - Tests - Test Cab: Damp heat, steady state
  • AS 60068.3.4:2003/Amdt 1:2004
  • IEC 60068-2-78:2012 RLV Environmental testing — Part 2-78: Tests — Test Cab: Damp heat, steady state
  • IEC 60068-3-4:2023 RLV Environmental testing — Part 3-4: Supporting documentation and guidance — Damp heat tests
  • IEC 60068-3-4:2023 Environmental testing — Part 3-4: Supporting documentation and guidance — Damp heat tests
  • AS 60068.2.66:2003 Environmental testing - Tests - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)
  • AS 1099.2.28:1994 Basic environmental testing procedures for electrotechnology Part 2.28: Tests - guidance for damp heat tests
  • AS 60068.2.67:2003 Environmental testing - Tests - Test Cy: Damp heat, steady state accelerated test primarily intended for components

European Committee for Standardization (CEN), hot and humid

  • EN ISO 12571:2013 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties
  • EN ISO 12571:2021 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2021)
  • EN ISO 4611:1999 Plastics - Determination of the Effects of Exposure to Damp Heat, Water Spray and Salt Mist ISO 4611:1987
  • EN ISO 4611:2010 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
  • EN ISO 12571:2000 Hygrothermal Performance of Building Materials and Products - Determination of Hygroscopic Sorption Properties ISO 12571:2000
  • EN 12524:2000 Building Materials and Products - Hygrothermal Properties - Tabulated Design Values
  • EN 12721:2009+A1:2013 Furniture - Assessment of surface resistance to wet heat
  • EN ISO 4611:2008 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
  • EN 554:1994 Sterilization of Medical Devices - Validation and Routine Control of Sterilization by Moist Heat
  • FprEN ISO 12571:2021 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO/FDIS 12571:2021)
  • EN 12721:1997 Furniture - Assessment of Surface Resistance to Wet Heat ISO 4211-2: 1983, Modified
  • EN ISO 12570:2000 Hygrothermal Performance of Building Materials and Products - Determination of Moisture Content by Drying at Elevated Temperature ISO 12570: 2000
  • EN ISO/TS 17665-2:2009 Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1
  • EN ISO 9346:1996 Thermal Insulation - Mass Transfer - Physical Quantities and Definitions (ISO 9346 : 1987)
  • EN ISO 9346:2007 Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary (ISO 9346:2007)
  • EN ISO 12570:2000/A1:2013 Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature - Amendment 1 (ISO 12570:2000/Amd 1:2013)
  • EN ISO 12570:2000/A2:2018 Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000/Amd 2:2018)
  • EN 16383:2016 Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS)

International Organization for Standardization (ISO), hot and humid

  • ISO 12571:2021 Hygrothermal performance of building materials and products — Determination of hygroscopic sorption properties
  • ISO 4611:1987 Plastics; Determination of the effects of exposure to damp heat, water spray and salt mist
  • ISO 12571:2013 Hygrothermal performance of building materials and products.Determination of hygroscopic sorption properties
  • ISO 12571:2000 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties
  • ISO 10051:1996 Thermal insulation - Moisture effects on heat transfer - Determination of thermal transmissivity of a moist material
  • ISO 12570:2000 Hygrothermal performance of building materials und products - Determination of moisture content by drying at elevated temperature
  • ISO 4211-2:2013 Furniture.Tests for surface finishes.Part 2: Assessment of resistance to wet heat
  • ISO 4211-2:1993 Furniture; tests for surfaces; part 2: assessment of resistance to wet heat
  • ISO 4611:1980 Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
  • ISO 4611:2008 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
  • ISO 4611:2010 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
  • ISO 12572:2001 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties
  • ISO/TS 17665-2:2009 Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1
  • ISO 5630-2:1985 Paper and board — Accelerated ageing — Part 2: Moist heat treatment at 90 degrees C and 25 % relative humidity
  • ISO 5630-3:1996 Paper and board - Accelerated ageing - Part 3: Moist heat treatment at 80 °C and 65 % relative humidity
  • ISO 9346:2007 Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary
  • ISO 11134:1994 Sterilization of health care products; requirements for validation and routine control; industrial moist heat sterilization
  • ISO 24353:2008/Amd 1:2021 Hygrothermal performance of building materials and products — Determination of moisture adsorption/desorption properties in response to humidity variation — Amendment 1
  • ISO 15148:2002/Amd 1:2016 Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion; Amendment 1
  • ISO 12572:2016 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method
  • ISO 18782:2015 Textiles - Determination of dynamic hygroscopic heat generation

Korean Agency for Technology and Standards (KATS), hot and humid

  • KS M ISO 4611:2012 Plastics-Determination of the effects of exposure to damp heat, water spray and salt mist
  • KS L ISO 10051:2006 Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
  • KS M ISO 10051:2012 Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
  • KS F ISO 12570:2005 Hygrothermal performance of building materials and products-Determination of moisture content by drying at elevated temperature
  • KS F ISO 12570:2013 Hygrothermal performance of building materials and products－Determination of moisture content by drying at elevated temperature
  • KS C 0283-2016 Environmental testing part 2 : Tests-Guidance for damp heat tests
  • KS C 0237-1994 Environmental testing Test Cb:Damp heat,steady state,primarily for equipment
  • KS C 0283-1997(2012) Environmental testing part 2 : Tests-Guidance for damp heat tests
  • KS M ISO 4611-2012(2022) Plastics－Determination of the effects of exposure to damp heat, water spray and salt mist
  • KS M ISO 4611-2012(2017) Plastics－Determination of the effects of exposure to damp heat, water spray and salt mist
  • KS G ISO 4211-2-2014(2019) Furniture — Tests for surface finishes — Part 2: Assessment of resistance to wet heat
  • KS L ISO 13788-2014(2019) Hygrothermal performance of building components and building elements — Internal surface temperature
  • KS C IEC 60068-2-78:2002 Environmental testing－Part 2：Tests－Test Cab：Damp heat, steady state
  • KS C IEC 60068-3-4:2010 Environmental testing－Part 3-4：Supporting documentation and guidance－Damp heat tests
  • KS P ISO 11134:2003 Sterilization of health care products－Requirements for validation androutine control－Industrial moist heat sterilization
  • KS P ISO 11134:2008 Sterilization of health care products－Requirements for validation androutine control－Industrial moist heat sterilization
  • KS F 2611-2019 Hygrothermal performance of building materials and products－ Determination of moisture adsorption/desorption properties in response to humidity variation
  • KS C 0222-2013 Basic environmental testing procedures part 2:tests, test ca:damp heat, steady state
  • KS C IEC 60068-3-4-2010(2020) Environmental testing－Part 3-4：Supporting documentation and guidance－Damp heat tests
  • KS C IEC 60793-1-50:2003 Optical fibres－Part 1－50：Measurement methods and test procedures－Damp heat(steady state)
  • KS C IEC 60793-1-50-2003(2018)
  • KS C IEC 60068-2-78:2018 Environmental testing — Part 2-78: Tests — Test Cab: Damp heat, steady state

American National Standards Institute （ANSI), hot and humid

  • ANSI/AAMI ST25-1987 Guideline for Industrial Moist Heat Sterilization of Medical Products
  • ANSI/TIA-455-160-B-2020 EC-60793-1-50 Optical Fibres - Part 1-50: Measurement Methods and Test Procedures- Damp Heat (Steady State)

Military Standard of the People's Republic of China-General Armament Department, hot and humid

  • GJB 150.9-1986 Laboratory environmental test methods for military materiel.Part 9:Damp heat test
  • GJB 5309.30-2004 Test methods for pyrotechnics Part 30: Damp heat test
  • GJB 8709.21-2015 Rocket Launcher Test Methods Part 21: Damp Heat Test
  • GJB 4.6-1983 Environmental test of ship electronic equipment, alternating damp heat test
  • GJB 595.5-1988 Environmental test methods for artillery optical instruments - damp heat test
  • GJB 360.3-1987 Test methods for electronic and electrical components Steady state damp heat test
  • GJB 797.16-1990 Environmental test methods for mine blasting equipment - alternating damp heat test
  • GJB 59.26-1991 Armored Vehicle Test Procedures General Principles for Adaptability Tests in Hot and Humid Areas
  • GJB 8709.25-2015 Rocket launcher test methods Part 25: Hot and humid natural environment test
  • GJB 150.9A-2009 Laboratory environmental test methods for military materiel.Part 9:Damp heat test
  • GJB 81.17-1985 Military bulldozer design finalization test procedures and hot and humid area adaptability test methods

IN-BIS, hot and humid

Society of Automotive Engineers (SAE), hot and humid

Professional Standard - Aerospace, hot and humid

  • QJ 481-1990 Test method for resistance to alternating damp heat of metal coatings
  • QJ 990.10-1986 Coating inspection method Coating heat resistance test method
  • QJ 1323.3-1987 Electromagnetic relay test method constant damp heat test
  • QJ 1323.4-1987 Electromagnetic relay test method alternating damp heat test
  • QJ 1184.5-1987 Damp heat test of missile equipment on environmental specification for coastal defense missile
  • QJ 1238.4-1987 Alternating Damp Heat Test of Cable Test Method on Missile Launch Vehicle
  • QJ 1177.6-1987 Damp heat test for environmental test methods of ground-to-air and ship-to-air missile weapon systems
  • QJ 481-1979 Damp heat and salt spray corrosion test of metal coating and chemical treatment layer

Danish Standards Foundation, hot and humid

  • DS/EN ISO 12571:2013 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties
  • DS/EN 13009:2000 Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient
  • DS/ISO 4211-2:2013 Furniture - Tests for surface finishes - Part 2: Assessment of resistance to wet heat
  • DS/EN ISO 4611:2011 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
  • DS/CEN ISO/TS 17665-2:2009 Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1
  • DS/EN 554:1994 Sterilization of medical devices - Validation and routine control of sterilization by moist heat
  • DS/EN 60793-1-50:2002 Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state)
  • DS/EN ISO 9346:2008 Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary
  • DS/EN 60068-2-78:2002 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
  • DS/EN 60068-3-4:2002 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
  • DS/EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
  • DS/EN ISO 12572:2001 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties
  • DS/EN 15026:2007 Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation
  • DS/IEC 68-2-28:1991 Environmental testing. Part 2: Tests. Guidance for damp heat tests
  • DS/EN ISO 12570:2000 Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature
  • DS/EN ISO 15148:2003 Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion
  • DS/ISO 24353:2008 Hygrothermal performance of building materials and products - Determination of moisture adsorption/desorption properties in response to humidity variation
  • DS/ISO 24353:2021 Hygrothermal performance of building materials and products – Determination of moisture adsorption/desorption properties in response to humidity variation – AMENDMENT 1
  • DS/IEC 68-2-3:1986 Basic environmental testing procedures. Part 2: Tests. Test Ca: Damp heat, steady state with Amendment No.1(1984)
  • DS/ISO 21129:2007 Hygrothermal performance of building materials and products - Determination of water-vapour transmission properties - Box method

YU-JUS, hot and humid

  • JUS N.A5.720-1980 Basic environmental testing procedures. Test Da: Accekrated damp heat
  • JUS N.A5.715-1980 Basic environmental testing procedures. Test Ca: Damp heat, steady state
  • JUS C.A5.021-1977 Corrosion Testing. Testing ofmetals and metallic and other coatings in damp heat atmospheres
  • JUS N.A5.721-1980 Basic environmental testing procedures. TestDb: Damp heat cyctic (12 +12 hour cyck)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, hot and humid

  • GJB 6458.21-2008 Test method of rocket launcher. Part 21: Humid heat test
  • GJB 5491.16-2005 Test method of terminally guided projectile Part 16:Humid heat test
  • GJB 5895.14-2006 Test method for anti-tank missile Part 14: Humidity and heat test
  • GJB 6458.25-2008 Test method of rocket launcher. Part 25: Damp heat test in natural environment

Professional Standard-Ships, hot and humid

  • CB 1146.4-1996 Environmental testing and engineering guidelines for marine equipment damp heat

International Electrotechnical Commission (IEC), hot and humid

  • IEC TR 63141:2020 Damp heat, steady state (unsaturated pressurized vapour with air)
  • IEC 60068-2-78:2001 Environmental testing - Part 2-78: Tests; Test Cab: Damp heat, steady state
  • IEC 60068-2-78:2012 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
  • IEC 60793-1-50:2001 Optical fibres - Part 1-50: Measurement methods and test procedures; Damp heat (steady state)
  • IEC 60068-3-4:2001 Environmental testing - Part 3-4: Supporting documentation and guidance; Damp heat tests
  • IEC 60793-1-50:2014 Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests
  • IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
  • IEC 60068-2-3:1969 Basic environmental testing procedures. Part 2 : Tests. Test Ca: Damp heat, steady state

Taiwan Provincial Standard of the People's Republic of China, hot and humid

  • CNS 3623-1995 Basic Environmental Testing Procedures Part 2:Tests,Test Ca:Damp Heat,Steady State
  • CNS 12887-1-1993 Method of Test for Accelerated Aging of Paper and Paperboard - Moist Heat Treatment at 80°Ｃ and 65% R.H.
  • CNS 12887-1993 Method of Test for Accelerated Aging of Paper and Paperboard - Moist Heat Treatment at 90°Ｃ and 25% R.H.
  • CNS 12887.1-1993 Method of Test for Accelerated Aging of Paper and Paperboard - Moist Heat Treatment at 80°Ｃ and 65% R.H.
  • CNS 14621-2002 Sterilization of health care products-requirements for validation and routine control-industrial moist heat sterilization

国家质量监督检验检疫总局, hot and humid

  • SN/T 4716-2016 Moisture and heat treatment methods for imported grain processing by-products

ES-UNE, hot and humid

  • UNE-EN ISO 12571:2022 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2021)
  • UNE-EN ISO 12570:2000/A2:2018 Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000/Amd 2:2018)
  • UNE-EN 16383:2016 Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) (Endorsed by Asociación Española de Normalización in May of 2017.)
  • UNE-EN ISO 12572:2018 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)

未注明发布机构, hot and humid

  • DIN EN ISO 12571:2000 Hygrothermal performance of building materials and products — Determination of hygroscopic sorption properties
  • GJB 4.5-1983 Environmental test of ship electronic equipment Constant humidity and heat test
  • BS EN 554:1994(1998) Sterilization ofmedical devices — Validation and routine control ofsterilization by moist heat
  • BS EN 60068-3-4:2002(2006) Environmental testing — Part 3 - 4 : Supporting documentation and guidance — Damp heat tests

VN-TCVN, hot and humid

  • TCVN 7699-2-78-2007 Environmental testing.Part 2-78: Tests Cab: Damp heat, steady state
  • TCVN 7699-2-30-2007 Environmental testing.Part 2-30: Tests.Test A: Damp heat, cyclic (12h+12h cycle)
  • TCVN 7699-2-66-2007 Environmental testing.Part 2-66: Tests.Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

Professional Standard - Agriculture, hot and humid

  • 2024药典 一部-2015 Prescription preparation and single preparation Shierhua Shirebi Tablet
  • 2125药典 一部-2020 Prescription preparation and single preparation Shierhua Shirebi Tablet
  • SC/T 7002.4-1992 Environmental test conditions and methods for marine electronic equipment - alternating damp heat
  • SC/T 7002.5-1992 Environmental test conditions and methods for marine electronic equipment - constant damp heat
  • 392药典 中药成方制剂卷-2010 Various Discussions on Internal Medicine 9. Juanbi Tongluo Agent (2) Qingretongbi Dampheatbi Granules (tablets)
  • 209药典 中药成方制剂卷-2010 Discussions on Internal Medicine VIII. Dehumidifying Agents (1) Clearing Heat, Promoting Dampness, Nephritis and Antipyretic Tablets
  • GB 1765-1979 Paint film preparation method for determination of heat and humidity resistance, salt spray resistance and weather resistance (artificial acceleration)

Professional Standard - Forestry, hot and humid

  • LY/T 3295-2022 General technical requirements for moist heat treatment of sawn timber pests

Professional Standard - Medicine, hot and humid

  • YY/T 1265-2015 Evaluation of materials of medical device subject to moist heat sterilization

BELST, hot and humid

  • STB 2178-2011 Textile materials. Definition method of linear dimensions after damp-heat treatment

国家药品监督管理局, hot and humid

  • YY/T 1600-2018 Product families and process categories for moist heat sterilization of medical devices

Zhejiang Provincial Standard of the People's Republic of China, hot and humid

  • DB33/T 2472-2022 Specifications for design, construction and environmental control of pig houses in hot and humid areas

PL-PKN, hot and humid

  • PN P50174-02-1993 Paper and board. Accelerated ageing. Moist heat treatment at 90 degree C and 25% relative humidity
  • PN P50174-03-1993 Paper and board. Accelerated ageing. Moist heat treatment at 80 degree C and 65% relative humidity
  • PN E04603-02-1992 Electrical and electronic products Environmental testing Test Cb: Damp heat, steady state, primarily for e?uipment

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, hot and humid

  • GB/T 35166-2017 Hygrothermal performance of building materials and products—Determination of moisture adsorption/desorption properties in response to humidity variation
  • GB/T 12665-2017 Requirements of damp-heat testing of electrical machine for service in general environmental condition
  • GB/T 12000-2017 Plastics—Determination of the effects of exposure to damp heat,water spray and salt mist
  • GB/T 32065.7-2015 Environmental test methods for oceanographic instruments—Part 7：Damp heat, cyclic
  • GB/T 32065.6-2015 Environmental test methods for oceanographic instruments—Part 6：Damp heat, steady state
  • GB/T 2423.3-2016 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state
  • GB/T 34561-2017 Photovoltaic（PV）glass—Test method and performance evaluation of exposure to damp heat outdoor environment

TR-TSE, hot and humid

  • TS 3376-1979 MACHINE — MADE TEXTILE FLOOR COVERINGS — DETERMINATION OF DIMENSIONAL CHANGES IN VARYING MOISTURE CONDITIONS
  • TS 2076-1975 BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT TEST D: ACCELERATED DAMP HEAT
  • TS 3185-1978 Basic Environmental Testing Procedures For Electronic Components And Electronic Equipment Part 2 : Test Guidance For Damp Heat Tests

European Committee for Electrotechnical Standardization（CENELEC）, hot and humid

  • EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
  • HD 323.2.28 S1-1988 Basic Environmental Testing Procedures - Part 2: Tests. Guidance for Damp Heat Tests
  • HD 323.2.3 S2-1987 Basic Environmental Testing Procedures - Part 2: Tests. Test Ca: Damp Heat, Steady State
  • EN 60793-1-50:2015 Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests
  • EN 60068-2-78:2001 Environmental Testing Part 2-78: Tests - Test Cab: Damp Heat, Steady State (Remains Current)

Professional Standard - Ocean, hot and humid

  • HY 21.3-1992 The basic method of environmental test for oceanographic instruments - Guideline for damp/heat test

AT-ON, hot and humid

  • OENORM EN ISO 12571:2021 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO/DIS 12571:2020)

FI-SFS, hot and humid

ZA-SANS, hot and humid

  • SANS 60793-1-50:2001 Optical fibres Part 1-50: Measurement methods and test procedures - Damp heat (steady state)
  • SANS 11138-3:2007 Sterilization of health care products - Biological indicators Part 3: Biological indicators for moist heat sterilization processes

Professional Standard - Aquaculture, hot and humid

  • SC 123-1984 Technical requirements for anti-salt spray, anti-mildew, anti-humidity and heat of electronic equipment of fishing boats
  • SC/T 7002.4-1991 Environmental test conditions and methods for marine electronic equipment with alternating damp heat
  • SC/T 7002.5-1991 Environmental test conditions and methods for marine electronic equipment with constant humidity and heat

American Society for Testing and Materials (ASTM), hot and humid

  • ASTM A1071/A1071M-11(2015) Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
  • ASTM A1071/A1071M-11 Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
  • ASTM D4714-96(2001) Standard Test Method for Determination of Effect of Moist Heat (50% Relative Humidity and 90°C) on Properties of Paper and Board
  • ASTM E3054/E3054M-23 Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes

工业和信息化部, hot and humid

  • SJ/T 31387-2016 Constant humidity and heat test equipment integrity requirements and inspection and evaluation methods

CENELEC - European Committee for Electrotechnical Standardization, hot and humid

  • EN 60793-1-50:2002 Optical Fibres - Part 1-50: Measurement Methods and Test Procedures - Damp Heat (Steady State)

KR-KS, hot and humid

  • KS P ISO 11134-2003 Sterilization of health care products－Requirements for validation androutine control－Industrial moist heat sterilization
  • KS C IEC 60068-2-78-2018(2023) Environmental testing — Part 2-78: Tests — Test Cab: Damp heat, steady state
  • KS M ISO 5630-3-2017 Paper and board－Accelerated ageing－Part 3：Moist heat treatment at 80 ℃ and 65 % relative humidity
  • KS C IEC 60068-2-78-2018 Environmental testing — Part 2-78: Tests — Test Cab: Damp heat, steady state
  • KS K ISO 18782-2023 Textiles — Determination of dynamic hygroscopic heat generation

Professional Standard - Energy, hot and humid

  • NB/T 11074-2023 Durability evaluation of high-voltage switchgear operating mechanism in hot and humid environment

ES-AENOR, hot and humid

Canadian Standards Association (CSA), hot and humid

  • CAN/CSA-Z17665-2009 Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (First Edition)
  • CSA Z17665-2-09-CAN/CSA-2009 Sterilization of health care products ?Moist heat ?Part 2: Guidance on the application of ISO 17665-1 First Edition

农业农村部, hot and humid

  • SC/T 7002.4-2016 Environmental test conditions and methods for electronic equipment used on fishing vessels - alternating damp heat (DB)
  • SC/T 7002.5-2016 Environmental test conditions and methods for electronic equipment used on fishing vessels Constant humidity and heat (Ca)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), hot and humid

  • ASHRAE NA-04-8-4-2004 Predicting Indoor Temperature and Humidity Conditions Including Hygrothermal Interactions with the Building Envelope

European Association of Aerospace Industries, hot and humid

  • AECMA PREN 2591-C4-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part C4 - Damp Heat Steady State Issue P 1
  • AECMA PREN 2591-C21-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part C21 - Damp Heat, Cyclic Test Issue P 1

TH-TISI, hot and humid

  • TIS 2380.2-30-2010 Environmental testing.part 2-30: tests.test db:damp heat, cyclic (12 h + 12 h cycle)

IT-UNI, hot and humid

American Society of Mechanical Engineers (ASME), hot and humid

Professional Standard - Building Materials, hot and humid

  • JC/T 2296-2014 Comprehensive environment test method for materials and elements of building construction.Artificial radiation-damp heat test

Professional Standard - Commodity Inspection, hot and humid

  • SN/T 2498.4-2012 Basic environmental testing for the import and export fireworks and firecracker articles.Damp heat,steady state

  steady state damp heat, hot and humid, Steady state damp heat test, constant heat and humidity, ca constant damp heat, Constant damp heat test, constant heat and humidity, Constant Damp Heat Method, moist heat sterilization, alternating hot and humid, Damp heat pump, Steam Moist Heat Sterilization, Humidity chamber, Damp heat aging, Damp heat test, Moist heat sterilizer, Humidity chamber temperature, humidity chamber, alternating heat and humidity, Moist heat disinfection.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved