ZH
RU
ES
Mass Spec Lab Gold
Mass Spec Lab Gold, Total:498 items.
In the international standard classification, Mass Spec Lab Gold involves: Applications of information technology, Dentistry, Optics and optical measurements, Medical sciences and health care facilities in general, Water quality, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Analytical chemistry, Aircraft and space vehicles in general, Corrosion of metals, Occupational safety. Industrial hygiene, Laboratory medicine, Quality, Electronic components in general, Ferroalloys, Environmental testing, Pulps, Veterinary medicine, Environmental protection, Surface treatment and coating, Wastes, Soil quality. Pedology, Meat, meat products and other animal produce, Test conditions and procedures in general, Coals, Extraction and processing of petroleum and natural gas, Non-metalliferous minerals, Standardization. General rules, Construction materials, Earthworks. Excavations. Foundation construction. Underground works, Pharmaceutics, Products of the chemical industry, On-board equipment and instruments, Services, Protection against crime, Vocabularies, Power stations in general, Processes in the food industry, Air quality, Farming and forestry, Metalliferous minerals, Non-ferrous metals, Mining and quarrying, Radiation measurements, Metrology and measurement in general, Acoustics and acoustic measurements, Buildings, Food products in general, Petroleum products in general, Lubricants, industrial oils and related products, Fertilizers, Powder metallurgy, Testing of metals, Textile fibres, Electrical and electronic testing, Paper and board, Radiation protection, Linear and angular measurements, Cereals, pulses and derived products, Agricultural machines, implements and equipment, Sports equipment and facilities, Rubber.
German Institute for Standardization, Mass Spec Lab Gold
- DIN EN ISO 7787-2:2020-06 Dentistry - Laboratory cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2020); German version EN ISO 7787-2:2020
- DIN EN ISO 7787-2:2020 Dentistry - Laboratory cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2020)
- DIN 12892:1977 Metal laboratory ware; stand bases
- DIN 12895-1:1977 Metal laboratory ware; bossheads
- DIN 12911:1977 Porcelain laboratory ware; desiccator plates
- DIN EN ISO 7787-3:2017-09 Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling machines (ISO 7787-3:2017); German version EN ISO 7787-3:2017
- DIN 12906:1976 Porcelain laboratory ware; mortar, pestle
- DIN EN ISO 15189:2023-03 Medical laboratories - Requirements for quality and competence (ISO 15189:2022); German version EN ISO 15189:2022
- DIN 12895-2:1978 Metal laboratory ware; hook connector
- DIN EN ISO 7787-4:2002-07 Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters (ISO 7787-4:2002); German version EN ISO 7787-4:2002
- DIN 12904:1975 Porcelain laboratory ware; crucibles and lids
- DIN EN ISO 15189:2007 Medical laboratories - Particular requirements for quality and competence (ISO 15189:2007); English version of DIN EN ISO 15189:2007-08
- DIN EN ISO 15189:2023 Medical laboratories - Requirements for quality and competence (ISO 15189:2022)
- DIN 12903:1976 Porcelain laboratory ware; basins
- DIN EN ISO 11274:2020-04 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019); German version EN ISO 11274:2019
- DIN 58936-2:2001 Quality management in laboratory medicine - Part 2: Terminology for quality and application of test procedure
- DIN 12980:2005 Laboratory furniture - Safety cabinets for handling cytotoxic substances
- DIN EN ISO 11274:2014 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:1998 + Cor 1:2009); German version EN ISO 11274:2014
- DIN ISO 11274:2012 Soil quality - Determination of the water retention characteristics - Laboratory methods (ISO 11274:1998 + Cor. 1:2009)
- DIN 58936-1:2000 Quality management in laboratory medicine - Part 1: Basic terminology
- DIN EN 16101:2012-12 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment; German version EN 16101:2012
- DIN EN ISO 11274:2020 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019)
- DIN EN ISO 16072:2011-09 Soil quality - Laboratory methods for determination of microbial soil respiration (ISO 16072:2002); German version EN ISO 16072:2011
- DIN 12897:1978 Metal laboratory ware; supports, scissors jack type, safety requirements and tests
- DIN 19684-10:2009 Soil quality - Chemical laboratory tests - Part 10: Testing and evaluation of water for irrigation
- DIN 19683-14:2007 Soil quality - Physical laboratory tests - Part 14: Determination of soild volume percentage of bog soils
ES-UNE, Mass Spec Lab Gold
- UNE-EN ISO 7787-2:2020 Dentistry - Laboratory cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2020)
- UNE-EN ISO 7787-3:2017 Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling machines (ISO 7787-3:2017) (Endorsed by Asociación Española de Normalización in July of 2017.)
- UNE-EN ISO 15189:2023 Medical laboratories - Requirements for quality and competence (ISO 15189:2022)
- UNE-EN ISO 11274:2019 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019) (Endorsed by Asociación Española de Normalización in November of 2019.)
- UNE-EN ISO 16072:2011 Soil quality - Laboratory methods for determination of microbial soil respiration (ISO 16072:2002) (Endorsed by AENOR in August of 2011.)
- UNE-EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (Endorsed by Asociación Española de Normalizaci...
- UNE-EN IEC 61010-2-061:2021/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (Endorsed by Asociación Española de Normalizaci...
Association Francaise de Normalisation, Mass Spec Lab Gold
- NF EN ISO 7787-2:2020 Médecine bucco-dentaire - Fraises de laboratoire - Partie 2 : fraises de laboratoire en carbure
- NF S91-116-2*NF EN ISO 7787-2:2020 Dentistry - Laboratory cutters - Part 2 : carbide laboratory cutters
- NF EN ISO 7787-3:2017 Médecine bucco-dentaire - Fraises de laboratoire - Partie 3 : fraises de laboratoire en carbure pour machines à fraiser
- NF B35-801:1972 Laboratory glassware. Porcelain laboratory apparatus. Quality and methods of test.
- NF EN ISO 15189:2022 Laboratoires médicaux - Exigences concernant la qualité et la compétence
- NF S91-116-3*NF EN ISO 7787-3:2017 Dentistry - Laboratory cutters - Part 3 : carbide cutters for milling machines
- NF S92-060*NF EN ISO 15189:2012 Medical laboratories - Requirements for quality and competence
- NF X31-114*NF ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
- NF S92-060:2007 Medical laboratories - Particular requirements for quality and competence.
- NF T90-210:2018 Water quality - Protocol for the intial method performance assesment in a laboratory
- NF S91-117:1995 Dental rotary instruments. Cutters. Part 2 : carbide laboratory cutters.
- NF X31-551:2014 Soil quality - Determination of the water-retention characteristic - Laboratory methods
- NF T90-210:2009 Water quality - Protocol for the intial method performance assesment in a laboratory.
- NF X31-551*NF EN ISO 11274:2019 Soil quality - Determination of the water-retention characteristic - Laboratory methods
- NF EN 16101:2012 Qualité de l'eau - Guide pour les études comparatives interlaboratoires ayant pour objet l'évaluation écologique
- NF ISO 23909:2008 Qualité du sol - Préparation des échantillons de laboratoire à partir d'échantillons de grande taille
- NF EN ISO 11274:2019 Qualité du sol - Détermination de la caractéristique de la rétention en eau - Méthodes de laboratoire
- NF EN ISO 7787-4:2003 Instruments rotatifs dentaires - Fraises techniques - Partie 4 : fraises techniques miniatures en carbure pour laboratoire
- NF EN IEC 61010-2-061:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-061 : exigences particulières pour spectromètres atomiques de laboratoire avec vaporisation et ionisation thermiques
- NF EN IEC 61010-2-061/A11:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-061 : exigences particulières pour spectromètres atomiques de laboratoire avec vaporisation et ionisation thermiques
- NF S91-130:1994 Dental rotary instruments. Cutters. Part 3 : carbide laboratory cutters for milling machines.
- NF EN ISO 16072:2011 Qualité du sol - Méthodes de laboratoire pour la détermination de la respiration microbienne du sol
- NF EN 17542-1:2022 Terrassements - Essais géotechniques en laboratoire - Partie 1 : Essai de dégradabilité
- NF C42-020-2-061/A11*NF EN IEC 61010-2-061/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061 : particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
- NF C42-020-2-061*NF EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061 : particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
- FD V03-769*FD CEN/TR 17474:2021 Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
- NF T90-700*NF EN 16101:2012 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
- NF EN 15708:2010 Qualité de l'eau - Guide pour l'étude, l'échantillonnage et l'analyse en laboratoire du phytobenthos dans les cours d'eau peu profonds
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Mass Spec Lab Gold
- GB/T 42580-2023 Intelligent laboratory microbial mass spectrometry identification platform
- GB/T 30431-2013 Gas chromatograph for laboratory
- GB/T 20470-2006 Requirements of external quality assessment for clinical laboratories
- GB/T 31010-2014 Spectral calibration in laboratory for dispersive hyperspectral sensor
- GB/T 22275.1-2008 Requirements of conduct for Good Laboratory Practice (GLP). Part 1: Quality assurance and GLP
- GB/T 29252-2012 Rule of the quality inspection of laboratory instruments and equipments
- GB/T 20468-2006 Guideline for internal quality control for quantitative measurements in clinical laboratory
- GB/T 27401-2008 Criterion on quality control of laboratories.Animal quarantine
- GB/T 27402-2008 Criterion on quality control of laboratories.Plant quarantine
- GB/T 31429-2015 Guide for quality management in a coal laboratory
- GB/T 27413-2012 Quality control and quality estimation in petroleum products testing laboratory
- GB/T 27404-2008 Criterion on quality control of laboratories.Chemical testing of food
- GB/T 22576-2008 Medical laboratories.Particular requirements for quality and competence
- GB 2595-1981 Safety of chemical laboratories--Technical standards for conducting metallurgical analysis
- GB/Z 42520-2023 Guidelines for X-ray fluorescence spectrometric laboratory practice for the analysis of iron ores
- GB/T 27405-2008 Criterion on quality control of laboratories.Microbiological testing of food
- GB/T 27406-2008 Criterion on quality control of laboratories.Food toxicology test
- GB/T 7964-2020 Sintered metal materials( excluding hardmetal )—Tension testing at room temperature
- GB/T 7964-1987 Sintered metal materials(excluding hardmetal)--Tension testing at room temperature
- GB 7964-1987 Sintered metal materials (excluding hardmetal)－Tension testing at room temperature
- GB/T 27403-2008 Criterion on quality control of laboratories.Molecular biological testing of food
- GB/T 35395-2017 General technical specification for mobile testing laboratory of quality and safety of agricultural products
- GB/T 4157-2006 Laboratory testing of metals for resistance to specific forms of environmental cracking in HS environments
- GB/T 27410-2010 Technical specification for laboratories of testing hazardous substances in consumer products
Korean Agency for Technology and Standards (KATS), Mass Spec Lab Gold
KR-KS, Mass Spec Lab Gold
- KS P ISO 7787-2-2021 Dentistry — Laboratory cutters —Part 2: Carbide laboratory cutters
- KS I ISO TS 20612-2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
- KS M ISO 5270-2020 Pulps — Laboratory sheets — Determination of physical properties
- KS P ISO 7787-3-2019 Dentistry — Laboratory cutters — Part 3: Carbide cutters for milling machines
- KS P ISO 7787-2-2019 Dental rotary instruments — Cutters — Part 2: Carbide laboratory cutters
- KS D ISO 7242-2021 Chemical analysis of light metals and their alloys —Statistical interpretation of inter-laboratory trials
- KS I ISO 11274-2021 Soil quality — Determination of the water-retention characteristic — Laboratory methods
- KS M ISO 7263-2014 Corrugating medium — Determination of the flat crush resistance after laboratory fluting
- KS I ISO 15473-2009 Soil quality－Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions
Professional Standard - Machinery, Mass Spec Lab Gold
- JB/T 6244-1992 Laboratory gas chromatograph
- JB/T 6073-1992 Metal coating. Laboratory complete immersion corrosion test
- JB/T 7901-1999 Metals materials - Uniform corrosion - Methods of laboratory immersion testing
Professional Standard - Agriculture, Mass Spec Lab Gold
- JJG 705-1990 laboratory liquid chromatograph
- NY/T 1896-2010 Criterion on quality control of laboratories for residue analysis of veterinary drugs
- SN/T 5624-2023
- SN/T 5622-2023
- 第1．1．4章OIE陆生动物诊断试验和疫苗手册-第七版 General Standard - Introduction - Quality Management in Veterinary Testing Laboratories
- 363药典 三部-2020 Guiding principle 9203 Guiding principles for quality management of pharmaceutical microbiology laboratories
- CNAS-GL027:2023 Guidelines for Internal Quality Control in Chemical Analysis Laboratories - Application of Control Charts
- CNAS-GL027：2023 Guidelines for Internal Quality Control in Chemical Analysis Laboratories - Application of Control Charts
国家市场监督管理总局、中国国家标准化管理委员会, Mass Spec Lab Gold
机械工业部, Mass Spec Lab Gold
British Standards Institution (BSI), Mass Spec Lab Gold
- 19/30362288 DC BS EN ISO 7787-2. Dentistry. Laboratory cutters. Part 2. Carbide laboratory cutters
- BS EN ISO 7787-3:2017 Dentistry. Laboratory cutters. Carbide cutters for milling machines
- BS EN ISO 7787-2:2001 Dental rotary instruments. Cutters. Carbide laboratory cutters
- BS EN ISO 7787-2:2020 Tracked Changes. Dentistry. Laboratory cutters. Carbide laboratory cutters
- BS EN ISO 15189:2022 Medical laboratories. Requirements for quality and competence
- BS 7755-5.5:1999 Soil quality - Physical methods - Laboratory methods
- BS EN ISO 15189:2012 Medical laboratories. Requirements for quality and competence
- BS EN ISO 7787-4:2002 Dental rotary instruments - Cutters - Miniature carbide laboratory cutters
- BS ISO 11274:1999 Soil quality. Determination of the water-retention characteristic. Laboratory methods
- BS ISO 11274:1998 Soil quality. Determination of the water retention characteristic. Laboratory methods
- BS ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
- BS EN ISO 11274:2019 Soil quality. Determination of the water-retention characteristic. Laboratory methods
- 21/30386856 DC BS EN ISO 15189. Medical laboratories. Requirements for quality and competence
- BS EN IEC 61010-2-061:2021+A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
- 21/30431306 DC BS EN ISO 5270.2. Pulps. Laboratory sheets. Determination of physical properties
- BS EN 27787-3:1992 Specification for dental rotary instruments - Cutters - Carbide laboratory cutters for milling machines
- BS ISO 6003:2017 Alpine skis. Determination of mass and polar moment of inertia. Laboratory measurement method
- BS EN ISO 7263-2:2019 Corrugating medium. Determination of the flat crush resistance after laboratory fluting - B-flute
- BS EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
- BS EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
- BS EN 61010-2-061:2003 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
- PD ISO/TS 5594:2022 Soil and water quality. Guidance document on designing an interlaboratory trial for validation of biotests
- BS EN ISO 16072:2011 Soil quality. Laboratory methods for determination of microbial soil respiration
Group Standards of the People's Republic of China, Mass Spec Lab Gold
- T/SLEA 0021-2023 laboratory metal cabinets
- T/CSBT 007-2019 Requirements for external quality assessment of blood screening laboratory
- T/LZZLXH 037-2020 Specification for treatment of heavy metal wastewater in laboratory
- T/ZZB 1577-2020 Mobile laboratory for detection of urban water supply
- T/CSCP 0035.8-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 8: Full Immersion Test Method for Laboratory Uniform Corrosion of Low Alloy Structural Steels
- T/CSTM 00349-2022 Specification for mineral dressing test in non-metallic ore laboratory
- T/HZQT 00005-2022 Textile Testing Laboratory Quality Management—Standard Substance Management?
- T/LZZLXH 053-2021 Management Instruction for Standard Substances in Chemical Laboratory
- T/CSCP 0035.7-2017 Laboratory corrosion tests on low alloy structural steels - Part 7: General procedures for laboratory microbial corrosion tests on low alloy structural steels
- T/ZS 0278-2022 Guidelines for quality control and management of ecological environment monitoring laboratory
- T/CSBT 004-2019 Quality monitoring indicators of blood testing laboratory in blood transfusion service
- T/CSCP 0035.14-2017 Laboratory corrosion tests on low alloy structural steels - Part 14: Laboratory corrosion fatigue test methods on low alloy steels
- T/BSAS 001-2020 Code for Emergency Management of Agricultural Product Quality Inspection and Testing Laboratory
- T/SZAS 38-2021 Quality requirements for SARS-CoV-2 nucleic acid testing laboratory
- T/SDCA 006-2021 Management specifiaction of waste liquid for quality and safety inspection of agricultural products
- T/CSCP 0035.1-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 1: General Principles of Test Methods
- T/HZQT 00006-2022 Textile Testing Laboratory Quality—Management Instrument and Equipment Period Verification
- T/CSCP 0035.9-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 9: Pitting Corrosion Test Methods on Low Alloy Structural Steels
- T/CNMIA 0039-2023 Private Laboratory of Molecular Pathology Performance Capability Evaluation
- T/CSCP 0035.11-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 11: Test Methods for Intergranular Corrosion of Low Alloy Structural Steels
- T/CSCP 0035.13-2017 Laboratory Corrosion Testing of Low Alloy Structural Steels Part 13: Stress Corrosion Test Methods for Low Alloy Structural Steels
- T/CSCP 0035.12-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 12: Test Methods for Galvanic Corrosion of Low Alloy Structural Steels
- T/CSCP 0035.10-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 10: Test Methods for Crevice Corrosion of Low Alloy Structural Steels
中华人民共和国国家卫生和计划生育委员会, Mass Spec Lab Gold
HU-MSZT, Mass Spec Lab Gold
Military Standards (MIL-STD), Mass Spec Lab Gold
American Society for Testing and Materials (ASTM), Mass Spec Lab Gold
- ASTM E785-81(1996)e1 Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM G31-72(2004) Standard Practice for Laboratory Immersion Corrosion Testing of Metals
- ASTM G31-72(1999) Standard Practice for Laboratory Immersion Corrosion Testing of Metals
- ASTM G31-12a Standard Practice for Laboratory Immersion Corrosion Testing of Metals
- ASTM E2014-11 Standard Guide on Metallographic Laboratory Safety
- ASTM E2014-99 Standard Guide on Metallographic Laboratory Safety
- ASTM E2014-99(2005) Standard Guide on Metallographic Laboratory Safety
- ASTM E2014-17 Standard Guide on Metallographic Laboratory Safety
- ASTM E785-81(2006) Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM E785-81(2001) Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM E785-81(2017) Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM NACE/ASTM G31-12a Standard Guide for Laboratory Immersion Corrosion Testing of Metals
- ASTM NACE/ASTM G31-12 Standard Guide for Laboratory Immersion Corrosion Testing of Metals
- ASTM E416-98 Standard Practice for Planning and Safe Operation of a Spectrochemical Laboratory
- ASTM E785-81(2011) Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM E416-98(2004) Standard Practice for Planning and Safe Operation of a Spectrochemical Laboratory (Withdrawn 2005)
- ASTM G31-21 Standard Guide for Laboratory Immersion Corrosion Testing of Metals
- ASTM NACE/ASTMG31-12 Standard Guide for Laboratory Immersion Corrosion Testing of Metals
- ASTM NACE/ASTMG31-12a Standard Guide for Laboratory Immersion Corrosion Testing of Metals
- ASTM E882-87(2003) Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
- ASTM E617-97 Standard Specification for Laboratory Weights And Precision Mass Standards
- ASTM E617-97(2003) Standard Specification for Laboratory Weights And Precision Mass Standards
- ASTM E882-87(1998) Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
- ASTM E617-97(2008) Standard Specification for Laboratory Weights And Precision Mass Standards
- ASTM E617-18 Standard Specification for Laboratory Weights and Precision Mass Standards
- ASTM E617-13 Standard Specification for Laboratory Weights and Precision Mass Standards
- ASTM E617-23 Standard Specification for Laboratory Weights and Precision Mass Standards
- ASTM D6617-00 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
- ASTM D6617-05 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
- ASTM D6617-08 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
- ASTM E2327-15 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
- ASTM E2327-15e1 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
- ASTM E882-10(2016) Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
- ASTM E882-10(2016)e1 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
- ASTM D8457-22 Standard Practice for Cleaning Glass and Plastic Labware Used in Metal and Metalloid Analyses
- ASTM E2327-04 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
- ASTM D4621-99 Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke
- ASTM D4621-99(2004) Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke
- ASTM G151-06 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM D6792-07 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-13 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-05 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-04 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-04a Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-06 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-03 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM G151-00 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM G151-97 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM G151-09 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM G160-98 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials by Laboratory Soil Burial
- ASTM G160-12(2019) Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial
- ASTM D6792-21c Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-22a Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-23 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-21a Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-21b Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-21 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-23a Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-22 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D4575-99 Standard Test Methods for Rubber Deterioration8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
- ASTM E826-08 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry
- ASTM G151-10 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM G151-19 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
IN-BIS, Mass Spec Lab Gold
US-CLSI, Mass Spec Lab Gold
RU-GOST R, Mass Spec Lab Gold
- GOST R 53022.3-2008 Clinical laboratory technologies. Requirements of quality of clinical laboratory tests. Part 3. Assessment of laboratory tests clinical significance
- GOST R 50065-1992 Ferroalloys. Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
- GOST 31883-2012 Principles of Good Laboratory Practice (GLP). Quality assurance in the application of GLP principles
- GOST R 53022.4-2008 Medical laboratory technologies. Requirement of quality of clinical laboratory tests. Part 4. Rules for development of requirements to timeliness of laboratory information submitting
- GOST R 50348.2-1992 Dental rotary instruments. Cutters. Parts 2: Carbide laboratory cutters
- GOST R 53079.2-2008 Medical laboratory technologies. Quality assurance of clinical laboratory tests. Part 2. Guidelines for improvements of quality in clinical-diagnostic laboratory. Typical model
- GOST R ISO 15189-2006 Medical laboratories. Particular requirements for quality and competence
- GOST R ISO 15189-2015 Medical laboratories. Particular requirements for quality and competence
- GOST R ISO 23909-2013 Soil quality. Preparation of laboratory samples from large samples
- GOST R 53133.2-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Part 2. Rules for intra-laboratory quality control of quantitative methods of clinical laboratory tests using control materials
- GOST R 8.729-2010 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Verification procedure
- GOST R 53022.1-2008 Medical laboratory technologies. Requirements for quality of clinical laboratory tests. Part 1. Quality management regulations of clinical laboratory tests
- GOST 8.485-2013 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Verification procedure
- GOST R 53133.3-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Description of materials for quality control of clinical laboratory investigations
- GOST R 53133.1-2008 Clinical laboratory technologies. Quality control of clinical laboratory tests. Part 1. Limits of allowable errors of the results of the analyte measurements in clinical-diagnostics laboratories
- GOST R 53022.2-2008 Clinical laboratory technologies. Requirements for quility of clinical laboratory tests. Part 2. Assessment of methods analytical reliability (accuracy, censitivity, specificity)
- GOST R 8.772-2011 State system for ensuring the uniformity of measurements. Analytical liquid laboratory chromatographs. The method of verification
- GOST R 53133.4-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Part 4. Rules for conducting of clinical audit of efficiency of laboratory provision of medical institution activity
- GOST 8.485-1983 State system for ensuring the uniformity of measurements. Analitical gas laboratory chromatographs. Methods and means of verification
- GOST 8.532-2002 State system for ensuring the uniformity of measurements. Certified reference materials of composition of substances and materials. Interlaboratory metrological certification. Content and order of works
PL-PKN, Mass Spec Lab Gold
International Organization for Standardization (ISO), Mass Spec Lab Gold
- ISO/TS 20612:2007 Water quality - Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
- ISO 7787-3:2017 Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling machines
- ISO 1775:1975 Porcelain laboratory apparatus; Requirements and methods of test
- ISO 15189:2012 Medical laboratories - Requirements for quality and competence
- ISO 7787-2:1984 Dental rotary instruments — Cutters — Part 2: Carbide laboratory cutters
- ISO 15189:2003 Medical laboratories - Particular requirements for quality and competence
- ISO 15189:2007 Medical laboratories - Particular requirements for quality and competence
- ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
- ISO 15189:2022 Medical laboratories — Particular requirements for quality and competence
- ISO 7787-2:1992 Dental rotary instruments; cutters; part 2: carbide laboratory cutters
- ISO 11274:2019 Soil quality — Determination of the water-retention characteristic — Laboratory methods
- ISO/PRF TS 7013 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
- ISO 7787-4:2002 Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters
- ISO 11274:1998 Soil quality - Determination of the water-retention characteristic - Laboratory methods
- ISO/TS 5594:2022 Soil and water quality — Guidance and requirements for designing an interlaboratory trial for validation of biotests
- ISO 16072:2002 Soil quality - Laboratory methods for determination of microbial soil respiration
- ISO/TS 7013:2023 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
- ISO/TR 7242:1981 Chemical analysis of light metals and their alloys; Statistical interpretation of inter-laboratory trials
Professional Standard - Geology, Mass Spec Lab Gold
- DZ/T 0130.16-2006 Geology and Mineral Resources Laboratory Testing Quality Management Regulations Part 16: Storage of Laboratory Samples and Secondary Samples
- DZ 0129-1994 Quality management specification for laboratory testing of geological and mineral resources
- DZ/T 0130.10-2006 Geological and Mineral Laboratory Testing Quality Management Specification Part 10: Physical and Chemical Performance Test of Non-metallic Minerals
- DZ/T 0130.12-2006 Geological and Mineral Laboratory Testing Quality Management Specification Part 12: Soil Testing
- DZ/T 0130.1-2006 Geological and Mineral Laboratory Testing Quality Management Specification Part 1: General Principles
- DZ/T 0130.11-2006 Geology and mineral resources laboratory testing quality management specification part 11: rock physical and chemical properties test
- DZ/T 0130.6-2006 Geological and Mineral Laboratory Testing Quality Management Specification Part 6: Water Sample Analysis
- DZ/T 0130.7-2006 Geological and Mineral Laboratory Testing Quality Management Specification Part 7: Coal Sample Analysis
- DZ/T 0130.14-2006 Geological and Mineral Laboratory Testing Quality Management Specification Part 14: Petroleum Geological Sample Testing
- DZ/T 0130.15-2006 Geological and Mineral Laboratory Testing Quality Management Practices Part 15: Testing of Marine Geological Samples
- DZ/T 0130.8-2006 Geological and Mineral Laboratory Testing Good Practice Part 8: Isotope Geological Sample Analysis
- DZ/T 0130.13-2006 Geology and Mineral Resources Laboratory Testing Quality Management Specification Part 13: Ore Processing and Smelting Performance Test
CZ-CSN, Mass Spec Lab Gold
- CSN 30 3440-1974 Brake lining laboratory quality control
- CSN 72 1021-1970 Laboratory determination of organic substances in soils
- CSN 67 3086-1981 Laboiatory test ?or deterniinalion of tesistance of coaling on metals againsl osmutic blistering
SG-SPRING SG, Mass Spec Lab Gold
- SS 335-1988 Guide To The Preparation Of Laboratory Quality Manual
Danish Standards Foundation, Mass Spec Lab Gold
- DS/INF 22-49:1988 Guidelines for development of a Quality Manual for a testing laboratory
- DS/EN ISO 15189:2013 Medical laboratories - Requirements for quality and competence
- DS/EN ISO 7787-2:2001 Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters
- DS/EN ISO 7787-4:2002 Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters
- DS/ISO 7787-3:1994 Dental rotary instruments - Cutters - Part 3: Carbide laboratory cutters for milling machines
- DS/EN ISO 15189:2008 Medical laboratories - Particular requirements for quality and competence
- DS/ISO 11274/Corr. 1:2009 Soil quality - Determination of the water-retention characteristic - Laboratory methods
- DS/ISO 11274:1999 Soil quality - Determination of the water-retention characteristics - Laboratory methods
- DS/ISO 17822:2020 In vitro diagnostic test systems – Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens – Laboratory quality practice guideLaboratory quality practice guide
- DS/EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
- DS/EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
- DS/EN ISO 16072:2011 Soil quality - Laboratory methods for determination of microbial soil respiration
- DS/CEN/TR 17474:2020 Cereals (wheat and barley) – Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
- DS/ISO 11266:1998 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions
Professional Standard - Petroleum, Mass Spec Lab Gold
- SY 6014-2010 Safety regulations for petroleum geology laboratory
- SY 6014-1994 Petroleum Geology Laboratory Safety Regulations
- SY/T 5252-2016 Specification for measurement of rock natural gamma spectrometry in laboratory
- SY 5252-2016 Laboratory measurement specification for natural gamma ray spectroscopy of rock samples
- SY/T 6439-2000 Management and preservation regulation of petroleum geology laboratory sample
Professional Standard - Medicine, Mass Spec Lab Gold
Professional Standard - Commodity Inspection, Mass Spec Lab Gold
- SN/T 3591-2013 Management guide of reference material in laboratory
- SN/T 3590-2013 Standard guide for accountability and quality control in the chemical analysis laboratory
- SN/T 3451-2012 Technical specifications of quality control for diagnostic reagents in plant quarantine laboratory
- SN/T 2990-2011 Quality control and quality evaluation. Index evaluation method of process and ability in testing laboratory
US-FCR, Mass Spec Lab Gold
Hunan Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
Yunnan Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
- DB53/T 595-2014 Laboratory qualification accreditation review specification
中国石油天然气总公司, Mass Spec Lab Gold
国家能源局, Mass Spec Lab Gold
Professional Standard - Electron, Mass Spec Lab Gold
- SJ/Z 3206.1-1989 General requirements for laboratories involved with determination of emision spectrum
RO-ASRO, Mass Spec Lab Gold
- STAS SR EN ISO 7787-2:1996 Dental rotary instruments. Cutters. Part 2: Carbide laboratory cutters
- STAS 12082-1982 LABORATORY A.C. RESISTORS General technical requirements for quality
- STAS 10039-1984 Metal frame furniture WORKING TABLES FOR SCHOOL LABORATORIES
- STAS 9838-1982 LABORATORY TORSION DYNAMOMETERS CALIBRATION. Tecchnical rrquircments for quality
- STAS 10140-1984 Metal frame furniture TABLE-CHAIR FOR SCHOOL LABORATORIES
- STAS 11243-1979 LABORATORY D. C. REZISTORS General technical requirements for quality
European Committee for Standardization (CEN), Mass Spec Lab Gold
- EN ISO 7787-3:2017 Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling machines
- EN ISO 15189:2012 Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15)
- EN ISO 15189:2003 Medical laboratories - Particular requirements for quality and competence ISO 15189: 2003
- EN ISO 15189:2022 Medical laboratories - Requirements for quality and competence (ISO 15189:2022)
- EN 16101:2012 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
- prEN ISO 15189:2021 Medical laboratories - Requirements for quality and competence (ISO/DIS 15189:2021)
- EN ISO 11274:2019 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019)
- EN ISO 16072:2011 Soil quality - Laboratory methods for determination of microbial soil respiration
- EN 27287-3:1993 Dental Rotary Instruments - Cutters - Part 3: Carbide Laboratory Cutters for Milling Machines (ISO 7787-3:1991)
- CEN/TR 17474:2020 Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
- PD CEN/TR 17474:2020 Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
Indonesia Standards, Mass Spec Lab Gold
CU-NC, Mass Spec Lab Gold
- NC 22-07-1985 Lab Apparatuses. Thermostatic Bath. Quality Specifications
- NC 22-06-1985 Lab Apparatuses. Liquefied Gas Burner. Quality Specifications
Professional Standard - Hygiene , Mass Spec Lab Gold
- WS/T 250-2005 Requirements of Quality Assurance for Clinical Laboratories
- WS/T 415-2013 Assessment of laboratory tests when proficiency testing is not available
Standard Association of Australia （SAA）, Mass Spec Lab Gold
Beijing Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
- DB11/T 1240-2015 Medical Laboratory Quality and Technical Requirements
- DB11/T 1467-2017 Basic requirements for rapid testing laboratories for agricultural product quality and safety
农业农村部, Mass Spec Lab Gold
- NY/T 2961-2016 Veterinary laboratory quality and technical requirements
GOSTR, Mass Spec Lab Gold
- GOST R ISO 7787-2-2012 Dental rotary instruments. Cutters. Part 2. Carbide laboratory cutters
- GOST 18325-1980 Laboratory furniture for operation with radioactive substances. General requirements
- GOST R 8.771-2011 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. The method of verification
National Association of Corrosion Engineers (NACE), Mass Spec Lab Gold
- NACE TM0169-2000 Laboratory Corrosion Testing of Metals Item No:21200
- NACE TM0169-2012 Standard Guide for Laboratory Immersion Corrosion Testing of Metals (Item No. 21200)
- NACE TM0190-2006 Impressed Current Laboratory Testing of Aluminum Alloy Anodes Item No:21221
- NACE TM0190-1998 Impressed Current Laboratory Testing of Aluminum Alloy Anodes Item No:21221
- NACE TM0190-2012 Impressed Current Laboratory Testing of Aluminum and Zinc Alloy Anodes (Item No. 21221)
ZA-SANS, Mass Spec Lab Gold
- SANS 15189:2004 Medical laboratories - Particular requirements for quality and competence
- SANS 15189:2009 Medical laboratories - Particular requirements for quality and competence
- SANS 10378:2005 General requirements for the competence of verification laboratories in terms of the Trade Metrology Act
- SANS 17025:2005 General requirements for the competence of testing and calibration laboratories
Professional Standard - Certification and Accreditation, Mass Spec Lab Gold
- RB/T 208-2016 Internal quality control of chemical laboratory.Comparison test
VN-TCVN, Mass Spec Lab Gold
- TCVN 6651-2000 Soil quality.Determination of the water-retention characteristic.Laboratory methods
- TCVN 7782-2008 Medical laboratories.Particular requirements for quality and competence
- TCVN 4775-1989 Ores and concentrates of non-ferrous metals.Sampling and preparation of samples for laboratory tests
YU-JUS, Mass Spec Lab Gold
- JUS H.N8.144-1988 Pulps. Laboratorv sheets. Determination of phvsical properties
- JUS B.E4.150-1987 Laboratory glassware. General reguirements of quality
- JUS B.E4.402-1987 Laboratory glassvvare and acessories. Lipkin pycnometers
- JUS B.E4.402-1977 Laboratory glassware and accessories - Lipkin pycnometers
- JUS B.E4.213-1988 Labotatory glassware and accessories. Mortar with pestle. Quality requirements
- JUS B.E4.105-1988 Laboratorf glassuare. Safety tube iritb two bulbs. Quality reguirements
- JUS B.E4.160-1987 Laboratory glassvvare and accessories. Petri dishes. Quality reguirements
- JUS B.E4.216-1987 Laboratoryglassware and accessories. I/Vatch glasses. Quality requirements
- JUS B.E4.106-1988 Labotatorf glassvare and accessories. Absorptlon tube tfith bulb. Quality requiremetits
- JUS B.E4.210-1987 Laboratory glassvvare and accessories. Beakers. Tali form. Quality requirements
- JUS B.E4.211-1987 Laboratory glassvvare andaccessories. Beakers. Low form. Quality reguirements
- JUS B.E4.214-1987 Laboratory glassware and accessories,Evaporating dishes With flat bottom Quality requirements
- JUS B.E4.116-1987 Laboratory glassvvare and accessories. Storage diches. Tali form. Quality reguirements
- JUS B.E4.115-1987 Laboratory glassvvare and accessories. Storage dishes. Low form. Quality reguirements
- JUS B.E4.172-1987 Laboratory glassvvare andaccessories. Boiling flasks with flatbottom, short wideneck. Quality require-ments
FI-SFS, Mass Spec Lab Gold
- SFS 5485-1988 In case of interpretation disputes the English textapplies
CEN - European Committee for Standardization, Mass Spec Lab Gold
- EN ISO 15189:2007 Medical laboratories - Particular requirements for quality and competence
- EN 27787-3:1993 Dental Rotary Instruments - Cutters - Part 3: Carbide Laboratory Cutters for Milling Machines
Professional Standard - Coal, Mass Spec Lab Gold
GB-REG, Mass Spec Lab Gold
Anhui Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
- DB34/T 3928-2021 Quality management practices for veterinary system laboratories
- DB34/T 4432-2023 Specifications for the quality control system of rapid testing laboratories for edible agricultural products
Tianjin Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
- DB12/T 796-2018 CDC Laboratory Quality Management Standards
- DB12/T 930-2020 Guidelines for the Management of Reference Materials in Chemical Analysis Laboratories
Shanxi Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
- DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy
- DB1404/T 17-2021 Inspection and testing laboratory instrument analytical method validation requirements chromatography
- DB14/T 2549-2022 Standards for management of traditional Chinese medicine laboratories for quality control in pharmaceutical companies
- DB14/T 2547-2022 Pharmaceutical enterprise quality control chemical drug laboratory management specification
- DB14/T 2548-2022 Quality Control Bioassay Laboratory Management Specifications for Pharmaceutical Enterprises
(U.S.) Ford Automotive Standards, Mass Spec Lab Gold
AT-ON, Mass Spec Lab Gold
- ONORM S 1130-1999 Sunscreen products - Laboratory testing of the sun protection factors (SPF)
- ONORM EN 27787-3-1994 Dental rotary instruments. Cutters. Part 3: Carbide laboratory cutters for milling machines (ISO 7787-3:1991)
- ONORM S 4023-1983 Alpine Ski; mass and moment of inertia; laboratory measurement methods
- ONORM EN 27787 Teil.2-1991 Dentistry — Dental rotary instruments — Cutters — Part 2: Carbide laboratory cutters (ISO 7787-2:1984)
- ONORM S 4070-1981 Cross country skis; mass, location of balance point; laboratory measurement method
U.S. Air Force, Mass Spec Lab Gold
Professional Standard - Public Safety Standards, Mass Spec Lab Gold
- GA/T 1704-2019 Quality Control Practices for Forensic Science DNA Laboratories
- GA/T 1940-2021 Forensic Science RDX, Taian and Turtle Test Gas Chromatography-Mass Spectrometry
Hebei Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
- DB13/T 2011-2014 Industry Classification and Code for Laboratory Qualification Accreditation
- DB13/T 5185-2020 Agricultural product quality inspection and testing laboratory waste management specification
Professional Standard - Electricity, Mass Spec Lab Gold
- DL/T 1029-2006 Laboratory quality management guide for water quality analyzers in thermal power plant
American Society of Quality Control （ASQC), Mass Spec Lab Gold
- ASQ Q2-1991 Quality Management and Quality System Elements for Laboratories - Guidelines T48
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Mass Spec Lab Gold
- ASHRAE 4752-2005 Improving Laboratory Building Energy Performance and Indoor Air Quality Using a Laboratory Air-Handling Unit System (LAHU)
TH-TISI, Mass Spec Lab Gold
- TIS 2154-2004 Medical laboratories.particular requirements for quality and competence
Lithuanian Standards Office , Mass Spec Lab Gold
- LST EN ISO 15189:2013 Medical laboratories - Requirements for quality and competence (ISO 15189:2012)
- LST EN ISO 7787-2:2002 Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000)
- LST EN ISO 7787-4:2002 Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters (ISO 7787-4:2002)
- LST EN 27787-3-2002 Dental rotary instruments - Cutters - Part 3: Carbide laboratory cutters for milling machines (ISO 7787-3:1991)
- LST EN 16101-2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
NZ-SNZ, Mass Spec Lab Gold
- NZS/ISO 15189:2007 Medical Laboratories - Particular Requirements for Quality and Competence
IFI/FASTNR - Industrial Fastener Institute, Mass Spec Lab Gold
- 139-1991 Quality Assurance Requirements for Fastener Testing Laboratories
Japanese Industrial Standards Committee (JISC), Mass Spec Lab Gold
- JIS T 5506:1993 Dental rotary instruments -- Carbide laboratory cutters
- JIS T 5506-2:2001 Dental rotary instruments -- Cutters -- Part 2: Carbide laboratory cutters
- JIS T 5506-3:2001 Dental rotary instruments -- Cutters -- Part 3: Carbide laboratory cutters -- Milling machines
- JIS T 5506-4:2005 Dental rotary instruments -- Cutters -- Part 4: Miniature carbide laboratory cutters
Jiangxi Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
Association of German Mechanical Engineers, Mass Spec Lab Gold
- VDI 4221 Blatt 2-2017 Quality assurance - Requirements on interlaboratory tests in immission control - Design, performance and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions
- VDI 4221 Blatt 1-2015 Quality assurance - Requirements on interlaboratory tests in immission control - Requirements on providers of interlaboratory tests
AENOR, Mass Spec Lab Gold
- UNE-EN ISO 7787-2:2001 Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters. (ISO 7787-2:2000)
- UNE 179007:2013 Health services. Systems of quality management for assisted reproduction laboratories
- UNE-EN ISO 7787-4:2002 Dental rotary instruments. Cutters. Part 4: Miniature carbide laboratory cutters. (ISO 7787-4:2002)
- UNE-EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
- UNE-ISO 16945:2015 Corrugating medium. Determination of the edge crush resistance after laboratory fluting
- UNE-EN 61010-2-061:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
IT-UNI, Mass Spec Lab Gold
ES-AENOR, Mass Spec Lab Gold
Professional Standard - Nuclear Industry, Mass Spec Lab Gold
- EJ/T 751-2014 Specification for testing quality assurance of radioactive geological laboratories
- EJ/T 751-1993 Quality Assurance Specifications for Geological Analysis and Testing Laboratories of Radioactive Minerals
- EJ 380-1989 Code for radiation protection design of open radioactive material laboratory
- EJ/T 715-1998 Standard guide for establishing a quality assurance program for analytical chemistry and physical measurement laboratories within the nuclear industry
- EJ/T 715-2012 Guidelines for developing quality assurance programs for physical and chemical analysis laboratories in the nuclear industry
Institute of Electrical and Electronics Engineers (IEEE), Mass Spec Lab Gold
- IEEE/ANSI N42.23-1996 Measurement and associated instrumentation quality assurance for radioassay laboratories
IX-FAO, Mass Spec Lab Gold
- CAC/GL 65-1997 Harmonized Guidelines for Internal Quality Control in Analytical Chemistry Laboratories
- CAC/GL 65-1997(En) Identical Guidelines for Internal Quality Control in Chemical Analysis Laboratories
CN-STDBOOK, Mass Spec Lab Gold
- 图书 3-8870 Food Microbiology Laboratory Quality Management Manual (Second Edition)
- 图书 a-4383 Top-down uncertainty assessment of quality control technology in inspection and testing laboratories
American National Standards Institute （ANSI), Mass Spec Lab Gold
- ANSI/ASTM D6792:2013 PRACTICE FOR QUALITY SYSTEM IN PETROLEUM PRODUCTS AND LUBRICANTS TESTING LABORATORIES
- ANSI N42.23-1996 Measurement and Associated Instrumentation Quality Assurance for Radioassay Laboratories
Henan Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
- DB4105/T 140-2020 Guidelines for the use of safety signs for animal product quality inspection and testing laboratories
- DB4117/T 285-2020 Technical guidelines for inspection of reference materials and instruments and equipment in agricultural product laboratories
- DB4117/T 325-2021 Guidelines for the Management of Standard Substances and Standard Solutions in Animal Product Testing Laboratories
Xinjiang Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
- DB6523/T 351-2023 Emergency management regulations for agricultural product quality and safety inspection and testing laboratories
- DB65/T 3920-2016 Cotton quality instrumentation notarization inspection laboratory construction and management specifications
Heilongjiang Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
- DB23/T 1578-2014 Determination of Potassium Content in Fertilizers in Mobile Laboratory - Flame Emission Spectrometry
Underwriters Laboratories (UL), Mass Spec Lab Gold
- UL 61010A-2-061 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization
- UL 61010A-2-061-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization (First Edition)
国家质量监督检验检疫总局, Mass Spec Lab Gold
- SN/T 4617-2016 Technical specifications for quality control of border port health and quarantine laboratories
AASHTO - American Association of State Highway and Transportation Officials, Mass Spec Lab Gold
- R 18-2001 Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Materials Testing Laboratories
- R 18-2004 Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Materials Testing Laboratories
- R 18-2005 Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Materials Testing Laboratories
- R 18-2006 Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Materials Testing Laboratories
司法部, Mass Spec Lab Gold
- SF/T 0079-2020 Real-time direct analysis of inkblots-technical specifications for high-resolution mass spectrometry inspection
PT-IPQ, Mass Spec Lab Gold
- NP EN ISO 5350-1:2000 Pulps Estimation of dirt and shives Part 1:Inspection of laboratory sheets(ISO 5350-1:1997)
Canadian Standards Association (CSA), Mass Spec Lab Gold
- CSA A283-00-2000 Qualification Code for Concrete Testing Laboratories Third Edition; General Instruction No.1
Sichuan Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
- DB51/T 2154-2016 Guidelines for the Management of Standard Substances and Standard Solutions in Chemical Analysis Laboratories
- DB51/T 2160-2016 Guidelines for Periodic Inspection of Laboratory Testing Instruments and Standard Materials
Inner Mongolia Provincial Standard of the People's Republic of China, Mass Spec Lab Gold
- DB1506/T 29-2022 Standard substance and standard solution management specification for chemical analysis laboratory
International Electrotechnical Commission (IEC), Mass Spec Lab Gold
- IEC 61010-2-061:2018 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionizati