ZH
RU
ES

Standard Method for Infrared Spectroscopy

Standard Method for Infrared Spectroscopy, Total:450 items.

In the international standard classification, Standard Method for Infrared Spectroscopy involves: Analytical chemistry, Petroleum products in general, Fuels, Lubricants, industrial oils and related products, Rubber and plastics products, Rubber, Products of the chemical industry, Plastics, Air quality, Medical sciences and health care facilities in general, Water quality, Road engineering, Glass, Paints and varnishes, Organic chemicals, Optoelectronics. Laser equipment, Information sciences. Publishing, Metrology and measurement in general, Domestic, commercial and industrial heating appliances, Optics and optical measurements, Coatings and related processes used in aerospace industry, Non-destructive testing, Soil quality. Pedology, Solar energy engineering, Protection against fire, Bridge construction, Semiconducting materials, Thermodynamics and temperature measurements, Materials for aerospace construction, Non-ferrous metals, Medical equipment, Raw materials for rubber and plastics, Inorganic chemicals, Nuclear energy engineering, Cereals, pulses and derived products, Metalliferous minerals, Linear and angular measurements, Optical equipment, Burners. Boilers, Milk and milk products, Radiation measurements, Electrical and electronic testing, Insulating fluids, Photography, Non-metalliferous minerals, Laboratory medicine, Ceramics, Paint ingredients, Telecommunications in general, Fibre optic communications, Ferrous metals, Construction materials, Testing of metals, Iron and steel products, Products of non-ferrous metals.

American Society for Testing and Materials (ASTM), Standard Method for Infrared Spectroscopy

ASTM D6348-98 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
ASTM D6348-12 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
ASTM D6348-12(2020) Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
ASTM D3414-98(2011)e1 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM D3414-98 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM D3414-98(2004) Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM E2224-18 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E2224-19 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM D4053-04(2009) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
ASTM D7889-21 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
ASTM D4053-04 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
ASTM D788-16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
ASTM D3677-10(2015) Standard Test Methods for Rubber&x2014;Identification by Infrared Spectrophotometry
ASTM D3677-00 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
ASTM D3677-10(2019) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
ASTM E1754-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM D6645-01(2010) Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D3162-21 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
ASTM D3677-10 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
ASTM D3162-12(2020) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
ASTM D3162-12 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
ASTM D8290-20 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
ASTM D3677-00(2004) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E1754-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM E1754-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM D6277-07(2022) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D8290-22 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
ASTM D7678-11 Standard Test Method for Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
ASTM D4053-98(2003) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
ASTM D4053-98 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
ASTM D3162-94(2000)e1 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
ASTM D3162-94(2005) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
ASTM D6277-01 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-99 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-01(2006) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-07(2017) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM E2937-18 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
ASTM E1754-95(2001)e1 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM E1754-95 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM D5845-21 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
ASTM D5845-01(2016) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
ASTM E3085-17 Standard Guide for Fourier Transform Infrared Spectroscopy in Forensic Tape Examinations
ASTM E1786-96 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM E1786-02 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM E1786-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM D3133-01 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
ASTM D7948-20 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
ASTM D3133-01(2005) Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
ASTM D7948-14e1 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
ASTM C1842-16 Standard Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
ASTM E2193-16 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
ASTM E1786-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM E1786-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM D5845-01(2006) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
ASTM D5845-95(2000)e1 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
ASTM D5845-01 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
ASTM D7653-18 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
ASTM E29-90 Standard Practice for Using Digits in Test Data to Determine Conformance with Specifications
ASTM E29-93a(1999) Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E2999-17 Standard Test Method for Analysis of Organic Compounds in Smokeless Powder by Gas Chromatography-Mass Spectrometry and Fourier Transform Infrared Spectroscopy
ASTM E1915-05 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
ASTM E1915-99 Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
ASTM E1915-01 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
ASTM E2224-22 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E2224-23 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E2224-23a Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E1915-07 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
ASTM D7948-14 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
ASTM D7653-10 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
ASTM E2224-10 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM D3124-98(2003) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D3124-98 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D3124-98(2019) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM E932-89(2002) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM E932-89(1997) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM E932-89(2021) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM E1915-07a Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
ASTM D6277-07 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-07(2012) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM D7371-12 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
ASTM D7371-14(2022) Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
ASTM E2224-23ae1 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM D6348-03 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
ASTM F1864-21 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
ASTM F1864-16 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
ASTM F1864-05 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM E388-04(2015) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
ASTM D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D5670-95(2009) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D7861-14(2019) Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
ASTM E1021-15(2019) Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
ASTM E1021-15 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D5670-95(2000)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D7371-14 Standard Test Method for Determination of Biodiesel &40;Fatty Acid Methyl Esters&41; Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy &40;FTIR-ATR-PLS Method&41;
ASTM D7678-17(2022) Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
ASTM D7678-17 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
ASTM D3133-96 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
ASTM D6248-21 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D4788-03(2022) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
ASTM F1619-95(2000)e1 Standard Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by Infrared Absorption Spectroscopy with p-Polarized Radiation Incident at the Brewster Angle
ASTM E1021-06 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
ASTM E932-89(2007) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM D5670-95(2004)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D3124-98(2011) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D8148-17 Standard Test Method for Spectroscopic Determination of Haze in Fuels
ASTM D7371-07 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
ASTM E2847-13e1 Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM E2847-14 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM D7844-22 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7844-22a Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7806-12 Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy
ASTM D4788-88(2001) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
ASTM D4788-03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
ASTM E1447-22 Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry
ASTM D7806-20 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
ASTM E2310-04(2015) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy
ASTM D8148-22 Standard Test Method for Spectroscopic Determination of Haze in Fuels
ASTM E2310-04 Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-infrared Spectroscopy
ASTM D5670-95(2019) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D5670-95(2014) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D5670-95(2023) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D7844-21 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7844-20 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7844-18 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7844-12 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7861-14 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
ASTM D3900-17 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM F1619-95(2000) Standard Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by Infrared Absorption Spectroscopy with p-Polarized Radiation Incident at the Brewster Angle
ASTM D8193-18 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
ASTM D3900-17(2021) Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D7861-14e1 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
ASTM F1864-98 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
ASTM F2778-09(2015) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
ASTM F2778-09(2020) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
ASTM D6342-22 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
ASTM G138-12 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM D5902-05(2015) Standard Test Method for Rubber&x2014;Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
ASTM C1205-20 Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry
ASTM D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
ASTM E1021-12 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
ASTM D4788-03 Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
ASTM C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
ASTM E388-04(2023) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
ASTM D3900-95(2000) Standard Test Methods for Rubber Raw-Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers)
ASTM D3900-95(2004)e1 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM F2381-10 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM D5594-18 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM D5594-18a Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM F3416-21 Standard Guide for Using Fourier Transform Infrared Spectrometry to Evaluate Synthetic Equine Surface Components
ASTM F1864-05(2010) Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
ASTM D5576-00(2013) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
ASTM E1999-99e1 Standard Test Method for Analysis of Cast Iron Using Optical Emission Spectrometry
ASTM E1999-99(2004) Standard Test Method for Analysis of Cast Iron Using Optical Emission Spectrometry
ASTM D7575-11 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
ASTM D7624-18 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM B568-98(2021) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
ASTM F1188-00 Standard Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption
ASTM D5986-96(2015) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform
ASTM D5986-96(2019) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform
ASTM D7575-10e1 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
ASTM F2381-19 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM D7266-13e1 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
ASTM D7266-07 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
ASTM D6342-12(2017)e1 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
ASTM D7266-13 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
ASTM D7266-13(2018)e1 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
ASTM D7266-23 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
ASTM D3237-22 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM E973-10 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM E307-72(2014) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM E307-72(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM E1933-99a(2010) Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
ASTM D5594-98 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM D5594-98(2004) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM D5594-98(2012) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM D6248-98(2012)e1 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM C1000-19 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
ASTM D7575-10 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
ASTM D7575-11(2017) Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
ASTM D7266-07e1 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
ASTM D7414-21 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7797-18 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D7797-17 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D7414-22 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D2144-94 Standard Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
ASTM D2144-01 Standard Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
ASTM D2144-01e1 Standard Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
ASTM G130-95(2002) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G130-95 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G130-06 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G130-12(2020) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM D3900-05 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D3900-05a Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D7797-16 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy&x2014;Rapid Screening Method
ASTM C1271-99 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM C1271-99(2020) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM D7686-19 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
ASTM D7414-18 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
ASTM F2381-04 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM D3831-22 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D5059-14(2019) Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
ASTM E1933-99a Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
ASTM E1862-97e1 Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
ASTM E1862-97(2002)e1 Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
ASTM E1933-99a(2005)e1 Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
ASTM E2050-99 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
ASTM E2050-99(2004) Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
ASTM E2050-12 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Spectrometry
ASTM D7573-09 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
ASTM C1473-05 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
ASTM C1030-10(2018) Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
ASTM C1473-11 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM D7360-16 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
ASTM D7797-23 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D7797-16a Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy&x2014;Rapid Screening Method
ASTM D6445-99 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry
ASTM D6445-99(2004)e1 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry
ASTM E1944-98(2021) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM D5059-14 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
ASTM G138-96 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM G138-12(2020)e1 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM D5986-96 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C₈-C₁₂ Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared
ASTM D7624-21 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7624-22 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E307-72(1996)e1 Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM E307-72(2002) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM D3237-06e1 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D3237-06 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM E2313-04 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)
ASTM C1001-00 Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
ASTM C1001-05 Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
ASTM C1001-11 Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
ASTM D3237-02 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
ASTM E507-09 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM D5059-20 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Spectroscopy
ASTM D2622-87e1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D2622-92e1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM C1415-18 Standard Test Method for ²³⁸Pu Isotopic Abundance By Alpha Spectrometry
ASTM D3831-12(2017) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D3237-12 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM C1268-94(2000) Standard Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray Spectrometry
ASTM C1030-03 Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
ASTM C1030-10 Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
ASTM D2621-87(2000) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM D2621-87(1995)e1 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM D2621-87(2016) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM E1862-97(2010) Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
ASTM E1862-14 Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
ASTM D1840-22 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM C1415-14 Standard Test Method for ²³⁸Pu Isotopic Abundance By Alpha Spectrometry
ASTM E388-04 Standard Test Method for Wavelength Accuracy of Spectral Bandwidth Fluorescence Spectrometers
ASTM D5986-96(2006) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
ASTM D5986-96(2001) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C₈-C₁₂ Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
ASTM D7057-13 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
ASTM D4764-01(2016) Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
ASTM D4764-01 Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
ASTM D4764-88(1993)e1 Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
ASTM D4764-01(2006) Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
ASTM D4764-01(2012) Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
ASTM E415-99a(2005) Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
ASTM E415-08 Standard Test Method for Atomic Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
ASTM D7360-11 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
ASTM E1982-98(2007) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
ASTM E1421-99(2021) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
ASTM D7057-23 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
ASTM F2778-09 Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
ASTM D8519-23 Standard Test Method for Determination of Hydrocarbon Types in Waste Plastic Process Oil Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
ASTM C1163-98 Standard Test Method for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
ASTM D6342-12 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
ASTM E388-72(1998) Standard Test Method for Spectral Bandwidth and Wavelength Accuracy of Fluorescence Spectrometers
ASTM D6348-03(2010) Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
ASTM D7172-06e1 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
ASTM C1473-00 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
ASTM E1834-96(2002) Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method
ASTM E1834-96 Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method
ASTM C1268-94(2008) Standard Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray Spectrometry
ASTM D5059-13 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
ASTM C1931-23 Standard Test Method for Determination of Uranium Isotopic Composition by Gamma-Ray Spectrometry
ASTM C810-90(1995) Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
ASTM E307-72(2019) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM D7172-14 Standard Test Method for Determining the Relative Density 40;Specific Gravity41; and Absorption of Fine Aggregates Using Infrared
ASTM E1447-05 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM D7573-18 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
ASTM D7573-18a Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
ASTM D7573-09(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
ASTM D7573-18ae1 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
ASTM E2412-10(2018) Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E539-11 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
ASTM E1085-09 Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry
ASTM E2465-19 Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry
ASTM D7172-06 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
ASTM C1441-04 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
ASTM C1441-13 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
ASTM D7963-22 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid S
ASTM D7963-21 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid S
ASTM D2622-03 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D7536-20 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D3900-15 Standard Test Methods for Rubber&x2014;Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D5477-02 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
ASTM D5477-95 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
ASTM E2465-06 Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry
ASTM E572-02a(2006)e2 Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM D4764-01(2023) Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
ASTM D2622-21 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D7751-12 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D7418-07 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM E1421-99 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers Level Zero and Level One Tests
ASTM E1421-99(2004) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
ASTM E1421-99(2009) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
ASTM E1421-99(2015)e1 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
ASTM C1441-99 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
ASTM D7183-16 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

German Institute for Standardization, Standard Method for Infrared Spectroscopy

DIN EN 14626:2022-11 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German and English version prEN 14626:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14626 (201...
DIN EN 14626:2012-12 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012 / Note: To be replaced by DIN EN 14626 (2022-11).
DIN EN 15058:2017-05 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry; German version EN 15058:2017
DIN 51453:2004-10 Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method
DIN 51639-4:2020-11 Testing of lubricants - Test methods - Part 4: Determination of vegetable oil content in used diesel motor oils using infrared spectrometry
DIN EN 15948:2020-12 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels; German version EN 15948:2020
DIN EN 14626:2012 Ambient air.Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012
DIN CEN/TS 17405:2020-11 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020
DIN 51433:1992 Testing of used oils; determination of the mineral oil content of used oil; infrared spectrometric method
DIN 51452:1994 Testing of lubricants; determination of the soot content in used Diesel engine oils; infrared spectrometry
DIN 51452:1994-01 Testing of lubricants; determination of the soot content in used Diesel engine oils; infrared spectrometry
DIN 51451:2020 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN 51639-4:2010 Testing of lubricants - Test methods - Part 4: Determination of vegetable oil fraction in used diesel motor oils using infrared spectrometry
DIN 51436:2009 Testing of petroleum products - Determination of the content of icing inhibitor in aviation turbine fuels - Infrared spectrometry
DIN 51639-4:2020 Testing of lubricants - Test methods - Part 4: Determination of vegetable oil content in used diesel motor oils using infrared spectrometry
DIN 51453:2004 Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method
DIN EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry; German version EN 15058:2017
DIN 51436:1989 Testing of petroleum products; determination of the content of icing inhibitors in aviation turbine fuels; infrared spectrometry

American National Standards Institute （ANSI), Standard Method for Infrared Spectroscopy

ANSI/ASTM D8290:2020 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
ANSI/ASTM D6645:2001 Test Methods for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ANSI/TIA/EIA 455-168A-1992 Chromatic Dispersion Measurement of Multimode Graded-Index and Single-Mode Optical Fibers by Spectral Group Delay Measurement - Variable Aperture Method in the Farfield
ASTM D2255/D2255M-09(2020)e1 Standard Test Method for Grading Spun Yarns for Appearance

交通运输部, Standard Method for Infrared Spectroscopy

JT/T 1329-2020 Test method for modifier content of SBS modified asphalt by infrared spectroscopy

Lithuanian Standards Office , Standard Method for Infrared Spectroscopy

LST EN 14626-2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
LST CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
LST EN 15948-2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
LST EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels
LST EN 15058-2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry

Danish Standards Foundation, Standard Method for Infrared Spectroscopy

DS/EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
DS/EN 15948:2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
DS/EN 15058:2006 Stationary source emissions – Determination of the mass concentration of carbon monoxide (CO) – Reference method: Non-dispersive infrared spectrometry

AENOR, Standard Method for Infrared Spectroscopy

UNE-EN 14626:2013 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
UNE-EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard Method for Infrared Spectroscopy

GB/T 7962.18-1987 Colourless optical glass test methods--Autocollimation test method for refractive index in the ultraviolet and infrared wave band
GB/T 24581-2009 Test method for low temperature FT-IR analysis of single crystal silicon for Ⅲ-Ⅴ impurities
GB/T 8570.6-2010 Determination of liquefied anhydrous ammonia.Part 6:Oil content.Gravimetric and infra-red methods

Professional Standard - Chemical Industry, Standard Method for Infrared Spectroscopy

HG/T 5077-2016 Optical functional films.Measuring method of the near infrared spectral transmittance

Hebei Provincial Standard of the People's Republic of China, Standard Method for Infrared Spectroscopy

DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method

British Standards Institution (BSI), Standard Method for Infrared Spectroscopy

BS EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
BS EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
22/30450999 DC BS EN 14626. Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
BS DD 220:1994 Soil quality - Determination of mineral oil content - Method by infrared spectrometry and gas chromatographic method
BS EN 238:1996 Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry
DD 220-1994 Soil quality. Determination of mineral oil content. Method by infrared spectrometry and gas chromatographic method
21/30437727 DC BS EN 6042. Aerospace series. Organic compounds. Test method. Analysis by infrared spectroscopy
BS EN 15058:2017 Tracked Changes. Stationary source emissions. Determination of the mass concentration of carbon monoxide. Standard reference method: non-dispersive infrared spectrometry
16/30287218 DC BS ISO 19021. Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
BS EN 15948:2020 Cereals. Determination of moisture and protein. Method using Near-Infrared Spectroscopy in whole kernels
BS ISO 19741:2018 Optics and photonics. Optical materials and components. Test method for striae in infrared optical materials
BS ISO 19740:2018 Optics and photonics. Optical materials and components. Test method for homogeneity of infrared optical materials
18/30374728 DC BS EN 15948. Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
21/30425925 DC BS ISO 17328. Optics and photonics. Optical materials and components. Test method for refractive index of infrared optical materials
BS ISO 19742:2018 Optics and photonics. Optical materials and components. Test method for bubbles and inclusions in infrared optical materials
BS ISO 17328:2021 Tracked Changes. Optics and photonics. Optical materials and components. Test method for refractive index of infrared optical materials

European Committee for Standardization (CEN), Standard Method for Infrared Spectroscopy

EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
CEN/TS 17405:2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry

Professional Standard - Electron, Standard Method for Infrared Spectroscopy

SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
SJ 2658.6-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for output optical power
SJ 2658.4-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for capacitance
SJ 2658.8-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for normal radiance
SJ 2658.7-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for radiant flux
SJ 2658.10-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for modulated wideband
SJ 2658.13-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for output optical power temperature coefficient
SJ 2658.5-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for forward series resistance
SJ 2658.11-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for pulse response characteristics
SJ 2658.9-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for the intensity space distribution and half-intensity angle of radiation

Association Francaise de Normalisation, Standard Method for Infrared Spectroscopy

NF X43-374:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method : non-dispersive infrared spectrometry.
NF X43-065*NF EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
NF EN 14626:2012 Air ambiant - Méthode normalisée de mesurage de la concentration en monoxyde de carbone par spectroscopie à rayonnement infrarouge non dispersif
NF X43-374*NF EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method : non-dispersive infrared spectrometry
NF EN 15058:2017 Émissions de sources fixes - Détermination de la concentration massique de monoxyde de carbone - Méthode de référence normalisée : spectrométrie infrarouge non dispersive
XP P92-021*XP ISO/TS 19021:2019 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
XP ISO/TS 19021:2019 Méthode pour déterminer les concentrations des gaz émis lors de l'essai ISO 5659-2 par spectroscopie infrarouge à transformée de Fourier
XP CEN/TS 17405:2020 Emissions de sources fixes - Détermination de la concentration volumique en dioxyde de carbone - Méthode de référence : spectrométrie infrarouge
NF EN 1767:1999 Produits et systèmes pour la protection et la réparation des structures en béton - Méthodes d'essais - Analyse par spectrométrie infrarouge
NF ISO 17328:2022 Optique et photonique - Matériaux et composants optiques - Méthode d'essai de l'indice de réfraction des matériaux optiques infrarouges

Japanese Industrial Standards Committee (JISC), Standard Method for Infrared Spectroscopy

JIS R 1803:2005 Method for the spectral radiant energy measurement of far infrared heaters specified in the far infrared region
JIS R 1801:2002 Method of measuring spectral emissivity of ceramic radiating materials for infrared heaters by using FTIR

RU-GOST R, Standard Method for Infrared Spectroscopy

GOST 32338-2013 Gasolines. Determination of MTBE, ETBE, TAME, DIPE, methanol, ethanol and tert-butanol by method of infra-red spectroscopy
GOST R 54039-2010 Soil quality. Quick method for the determination of oil products by NIR spectroscopy
GOST R 54039-2010(2019) Soil quality. Quick method for the determination of oil products by NIR spectroscopy

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Standard Method for Infrared Spectroscopy

PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)

CZ-CSN, Standard Method for Infrared Spectroscopy

CSN 58 8785-1994 Methods of test for fats and oils Determination of content of isolated trans-unsaturated compounds by infrared spectroscopy

International Organization for Standardization (ISO), Standard Method for Infrared Spectroscopy

ISO/TS 19021:2018 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
ISO 19741:2018 Optics and photonics — Optical materials and components — Test method for striae in infrared optical materials

Professional Standard - Medicine, Standard Method for Infrared Spectroscopy

YY/T 0814-2010 tandard test method for evaluating trans-vinylene yield in irradiated ultra-high-molecular-weight polyethylene fabricated forms intended for surgical implants by infrared spectroscopy

Society of Automotive Engineers (SAE), Standard Method for Infrared Spectroscopy

SAE AS6171/9-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by Fourier Transform Infrared Spectroscopy (FTIR) Test Methods

SAE - SAE International, Standard Method for Infrared Spectroscopy

SAE AS6171/9-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Fourier Transform Infrared Spectroscopy (FTIR) Test Methods

ES-UNE, Standard Method for Infrared Spectroscopy

UNE-EN 15948:2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Standard Method for Infrared Spectroscopy

GJB 5384.14-2005 Test methods of performance for pyrotechnic composition Part 14: Determination of infrared radiance effective Infrared spectrum distribution method
GJB 6238.8-2008 Test method fo effect for special serial bomb. Part 8: Infrared radiation intensity for target flare of aerial target bomb. Spectral analytics method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Standard Method for Infrared Spectroscopy

GB/T 35772-2017 Rapid detection of phthalate esters in polyvinyl chloride products—Infra-red spectrometric method
GB/T 35927-2018 Standard practice for identification of polymer layers or inclusions by fourier transform infrared microspectroscopy
GB/T 10574.12-2017 Methods for chemical analysis of tin-lead solders—Part 12：Determination of sulfur content—High frequency combustion with infrared absorption method

IT-UNI, Standard Method for Infrared Spectroscopy

UNI CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
UNI EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

Illuminating Engineering Society of North America, Standard Method for Infrared Spectroscopy

IESNA LM-10-1996 Approved Method for Photometric Testing of Outdoor Fluorescent Luminaires

KR-KS, Standard Method for Infrared Spectroscopy

KS M ISO 7106-2017 Liquefied anhydrous ammonia for industrial use — Determination of oil content — Gravimetric and infra-red spectrometric methods

Professional Standard - Non-ferrous Metal, Standard Method for Infrared Spectroscopy

YS/T 820.16-2012 Methods for chemical analysis of laterite nickel ores.Part 16:Determination of carbon and sulfur content.High frequency combustion with infrared absorption spectrometry
YS/T 1047.4-2015 Methods for chemical analysis of copper magnetite.Part 4:Determination of sulfur content.High frequency combustion with infrared absorption method

Aerospace, Security and Defence Industries Association of Europe (ASD), Standard Method for Infrared Spectroscopy

ASD-STAN PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)

Standard Association of Australia （SAA）, Standard Method for Infrared Spectroscopy

AS 2300.1.8.2:1991 Methods of chemical and physical testing for the dairying industry - General methods and principles - Assessment of instrumental methods - Infrared spectrometric analysis of milk

AT-ON, Standard Method for Infrared Spectroscopy

OENORM EN 15948-2020 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels
ONR CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry (CEN/TS 17405:2020)

CH-SNV, Standard Method for Infrared Spectroscopy

SN EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

CEN - European Committee for Standardization, Standard Method for Infrared Spectroscopy

PREN 15948-2018 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels

Professional Standard - Commodity Inspection, Standard Method for Infrared Spectroscopy

SN/T 3298-2012 Determination of propylene units in ethylene-propylene copolymer for import and export.Infrared spectroscopy method

Group Standards of the People's Republic of China, Standard Method for Infrared Spectroscopy

T/ZSA 39-2020 Characterization of Graphene - Work function - Ultraviolet photoelectron spectroscopy (UPS) method
T/ZGIA 002-2020 Graphene Test Methods Determination of Work Function Ultraviolet Photoelectron Spectroscopy

NL-NEN, Standard Method for Infrared Spectroscopy

NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry

Professional Standard - Energy, Standard Method for Infrared Spectroscopy

NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

国家能源局, Standard Method for Infrared Spectroscopy

SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

Yunnan Provincial Standard of the People's Republic of China, Standard Method for Infrared Spectroscopy

DB53/T 498-2013 Determination of main chemical constituents of tobacco and tobacco products Near-infrared diffuse reflectance spectrometry

GOSTR, Standard Method for Infrared Spectroscopy

GOST 34567-2019 Meat and meat products. Method for determination of moisture, fat, protein, sodium chloride and ash using near infrared spectroscopy

未注明发布机构, Standard Method for Infrared Spectroscopy

BS EN 238:1996(2004)*BS 2000-429:1996 Methods of test for petroleum and its products — Part 429 : Liquid petroleum products — Petrol — Determination of the benzene content by infrared spectrometry

Electronic Components, Assemblies and Materials Association, Standard Method for Infrared Spectroscopy

ECA 448-21-1989 Method 21 Test Standard for Electromechanical Switches: Environmental Effects of Machine Soldering Using an Infrared System
ECA EIA-448-21-1989 Method 21 Test Standard for Electromechanical Switches: Environmental Effects of Machine Soldering Using an Infrared System

VN-TCVN, Standard Method for Infrared Spectroscopy

TCVN 7143-2010 Standard test method for lead in gasoline by atomic absorption spectroscopy

工业和信息化部, Standard Method for Infrared Spectroscopy

YS/T 1332.3-2019 Methods for chemical analysis of crude copper and cobalt raw materials Part 3: Determination of sulfur content High frequency combustion-infrared spectroscopy