ZH
RU
ES

Do not crawl

Do not crawl, Total:207 items.

In the international standard classification, Do not crawl involves: Shipbuilding and marine structures in general, Inland navigation vessels, Iron and steel products, Miscellaneous domestic and commercial equipment, Kitchen equipment, Mining equipment, Medical equipment, Document imaging applications, Rubber and plastics products, Insulation, Electrical accessories, Materials for aerospace construction, Non-ferrous metals, Construction materials, Pipeline components and pipelines, Testing of metals, Plant and equipment for the food industry, Cinematography, Powder metallurgy, Aerospace fluid systems and components, Cutting tools, Refractories, Non-textile floor coverings, Woodworking equipment, Lubricants, industrial oils and related products, Products of the chemical industry, Radiocommunications, Welding, brazing and soldering, Fasteners for aerospace construction, Elements of buildings, Optics and optical measurements.


German Institute for Standardization, Do not crawl

  • DIN EN 13574:2001-11 Inland navigation vessels - Permanently installed climbing devices with a length not exceeding 5 m; German version EN 13574:2001
  • DIN 4544:1976 Card cabinets with and without covers; card sizes, inside dimensions of card cabinets
  • DIN 4544:1976-03 Card cabinets with and without covers; card sizes, inside dimensions of card cabinets
  • DIN 13109-1:1980 Medical instruments; wire cutting scissors without carbide inserts
  • DIN 58280:2016-03 Medical instruments - Iris scissors without carbide inserts
  • DIN EN 12326-3:2021 Slate and stone for discontinuous roofing and external cladding - Part 3: Specifications for schist and schistose stones; German and English version prEN 12326-3:2021
  • DIN 66018 Bb.1:1972 Unpunched and punched paper cards for information processing; storage and handling
  • DIN 65229:2012 Aerospace series - Gaskets sheets - Technical specification; Inactive for new design
  • DIN 96114:2023-03 Medical instruments - Scissors for preparations type Mayo without carbide inserts
  • DIN 13114-1:2019-12 Medical instruments - Part 1: Scissors type Mayo, without carbide inserts
  • DIN EN 12560-1:2001-04 Flanges and their joints - Gaskets for class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 12560-1:2001 / Note: To be replaced by DIN EN 12560-1 (2023-03) (in preparation).
  • DIN EN 12326-3:2021-06 Slate and stone for discontinuous roofing and external cladding - Part 3: Specifications for schist and schistose stones; German and English version prEN 12326-3:2021 / Note: Date of issue 2021-05-14
  • DIN EN 1514-1:2023-03 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German and English version prEN 1514-1:2023 / Note: Date of issue 2023-01-27*Intended as replacement for DIN EN 1514...
  • DIN EN 1514-1:1997-08 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 1514-1:1997 / Note: To be replaced by DIN EN 1514-1 (2023-03) (in preparation).
  • DIN EN 12560-1:2023-03 Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German and English version prEN 12560-1:2023 / Note: Date of issue 2023-01-27*Intended as replacement for DIN EN ...
  • DIN 13112-1:2017-11 Medical instruments - Part 1: Scissors for preparations without carbide inserts
  • DIN EN ISO 11833-1:2019-12 Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019); German version EN ISO 11833-1:2019
  • DIN 13133-1:2005 Medical instruments - Uterine scissors, curved on flat, type Sims - Part 1: Without carbide inserts
  • DIN 65553:2001 Aerospace - Shims, without hole, for anchor nuts with MJ thread; Not to be used for new designs
  • DIN EN 13111:2010-11 Flexible sheets for waterproofing - Underlays for discontinuous roofing and walls - Determination of resistance to water penetration; German version EN 13111:2010
  • DIN ISO 441:1998-12 Textile machinery and accessories - Drop wires for warp stop motions for weaving machines without automatic drawing-in (ISO 441:1997)
  • DIN EN 17872:2022-08 Flexible sheets for waterproofing - Underlays for discontinuous roof coverings - Artificial ageing procedure; German and English version prEN 17872:2022 / Note: Date of issue 2022-07-01

Association Francaise de Normalisation, Do not crawl

  • NF J83-303*NF EN 13574:2002 Inland navigation vessels - Permanently installed climbing devices with a length not exceeding 5 m.
  • NF ISO 4144:2009 Tuyauteries - Raccords en acier inoxydable, filetés conformément à l'ISO 7-1
  • NF E29-521:1981 Pipe for the food industry. Stainless steel clamp liners and gasket.
  • NF EN 12560-1:2001 Brides et leurs assemblages - Joints pour les brides désignées Class - Partie 1 : joints plats non métalliques avec ou sans insert
  • NF EN ISO 11833-1:2019 Plastiques - Feuilles en poly(chlorure de vinyle) non plastifié - Partie 1 : types, dimensions et caractéristiques pour des plaques d'épaisseur non inférieure à 1 mm
  • NF EN 1514-1:1997 Brides et leurs assemblages - Dimensions des joints pour les brides désignées PN - Partie 1 : joints plats non-métalliques avec ou sans insert.
  • NF E29-833:1979 PIPEWORKS. FLEXIBLE METAL HOSES DOUBLE INTERLOCK,ASBESTOS PACKING,PRESSURE-TIGHT,CIRCULAR SECTION,IN AUSTENITIC STAINLESS STEEL.
  • XP E66-525-202*XP ISO/TS 13399-202:2018 Cutting tool data representation and exchange - Part 202 : creation and exchange of 3D models - Irregular inserts

Danish Standards Foundation, Do not crawl

  • DS/EN 13574:2001 Inland navigation vessels - Permanently installed climbing devices with a length not exceeding 5 m
  • DS/EN 2546:1989 Aerospace series. Washers, lock with radial serrations in corrosion resisting steel. Dimensions
  • DS/EN 2596:1989 Aerospace series. Washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated. Dimensions
  • DS/EN ISO 11833-1:2012 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm

Lithuanian Standards Office , Do not crawl

  • LST EN 13574-2002 Inland navigation vessels - Permanently installed climbing devices with a length not exceeding 5 m
  • LST EN 25754-2002 Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:1978)

AENOR, Do not crawl

  • UNE-EN 13574:2002 Inland navigation vessels - Permanently installed climbing devices with a length not exceeding 5 m
  • UNE-EN 1514-1:1997 FLANGES AND THEIR JOINTS. DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES. PART 1: NON-METALLIC FLAT GASKETS WITH OR WITHOUT INSERTS.
  • UNE-EN 25754:1999 Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:1978)

Professional Standard - Ferrous Metallurgy, Do not crawl

GM Holden Ltd, Do not crawl

IT-UNI, Do not crawl

Korean Agency for Technology and Standards (KATS), Do not crawl

  • KS D 3705-2020 Hot rolled stainless steel plates, sheets and strip
  • KS D 3705-1987 Hot rolled stainless steel plates, sheets and strip
  • KS M 3501-2004(2009) Plastics－Unsaturated poly(vinyl chloride) sheets－Types, dimensions and characteristics－Part 1：Sheets of thickness not less than 1 mm
  • KS C IEC 60664-5:2005 Insulation coordination for equipment within low-voltage systems－Part 5：A comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
  • KS D 0259-2012(2017) Methods of measurement of thickness,thickness variation and bow for silicon wafer
  • KS D ISO 2740-2009(2019) Sintered metal materials, excluding hardmetals－Tensile test pieces
  • KS A ISO 8001-2003(2018) Cinematography - Underexposed motion-picture film requiring forced development - Dimension method
  • KS A ISO 4834-2003(2018) Cinematography - Magnetic sound test films excluding striped release prints - Basic technical characteristics
  • KS A ISO 4834:2003 Cinematography－Magnetic sound test films excluding striped release prints－Basic technical characteristics
  • KS M ISO 11833-1:2018 Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm

YU-JUS, Do not crawl

  • JUS B.Z0.109-1978 Cross-sections of mine openings. Special chamber for drivagening slope and vertikal mining working without mise climber
  • JUS N.L4.073-1983 Caps for tubular fluorescent lamps. ,,G0"and ,,NOT GO"gauge for bi-pin cap G-5. Main dimensions

Professional Standard - Machinery, Do not crawl

  • JB/T 7349-2014 Stainless steel blade castings for hydraulic turbines
  • JB/T 7350-2002 Stainless steel blade castings for axial-flow hydraulic turbines
  • JB/T 7350-1994 Stainless Steel Blade Castings for Axial Turbine
  • JB/T 7349-2002 Stainless steel blade castings for welded construction runner for Francis hydraulic turbines
  • JB/T 7349-1994 Welded Runner Stainless Steel Blade Castings for Francis Turbine
  • JB/T 1461-1974 Size series and technical requirements of hard alloy non-regrinding blades

Professional Standard - Coal, Do not crawl

Group Standards of the People's Republic of China, Do not crawl

  • T/XXCCSS 001-2020 Stainless steel steaming plate ,steaming rack ,steamer ,steaming sheet
  • T/JXII 0001-2023 Cold rolled stainless steel strip for razors
  • T/CSTM 00255-2020 High frequency vibration fine screen with stainless steel plate screen
  • T/CSTM 00256-2020 Rigid stainless steel plate screen for high frequency vibration fine screen
  • T/CASME 41-2022 Precision martensite stainless strip steel for compressor valves

Professional Standard - Agriculture, Do not crawl

Professional Standard - Medicine, Do not crawl

Professional Standard - Aviation, Do not crawl

  • HB 6573-1992 Standard Reference Radiographic Films for Investment Steel Castings (Films Not Provided)
  • HB 6578-1992 Standard reference radiographs for inspection of aluminum and magnesium alloy castings (non-provided)
  • HB/Z 105-1986 Aeronautical stainless steel compressor blade die forgings
  • HB 5451-1990 Stainless, heat-resistant steel investment casting compressor stator blades
  • HB 966-1970 Cast aluminum alloy pinhole X-ray fluoroscopy grading standard (negative film not provided)
  • HB 8226-2002 Control rod,locked with locking gasket Dangler tie-in with bearing
  • HB 8229-2002 Control rod,locked with locking gasket Tie-in with bush
  • HB 8227-2002 Control rod,locked with locking gasket two dangler tie-ins with bearing
  • HB 967-1970 ZM-5 magnesium alloy microporosity X-ray fluoroscopy grading standard (no negative film provided)
  • HB 5395-1988 Classification standard for elongated holes in X-ray photographic inspection of aluminum alloy castings (negative films not provided)
  • HB 5397-1988 Standard for X-ray photographic inspection of scattered looseness of aluminum alloy castings (negative film not provided)
  • HB 5396-1988 Classification standard for spongy porosity in X-ray examination of aluminum alloy castings (negative film not provided)

Standard Association of Australia （SAA）, Do not crawl

  • AS 1998:1977 A6 microfiche for engineering and other data (excluding computer output microfiche)

Taiwan Provincial Standard of the People's Republic of China, Do not crawl

  • CNS 8497-2005 Hot rolled stainless steel plates, sheets and strips
  • CNS 8499-1999 Cold rolled stainless steel plates"," sheets and strips
  • CNS 8497-1999 Hot rolled stainless steel plates"," sheets and strips
  • CNS 8499-2005 Cold rolled stainless steel plates, sheets and strips
  • CNS 9267-1998 Method of mass calculation for stainless steel plates and sheets and heat-resisting steel plates and sheets
  • CNS 9267-2005 Method of mass calculation for stainless steel plates and sheets,and heat-resisting steel plates and sheets
  • CNS 12671-1990 Method of Test for Radiographic and Classification of Radiographs for Stainless Steel Welds
  • CNS 13634-1996 Micrographics-Transparent A6 Size Microfiche of Variable Division-Image Arrangements A and B

(U.S.) Ford Automotive Standards, Do not crawl

WRC - Welding Research Council, Do not crawl

Society of Automotive Engineers (SAE), Do not crawl

  • SAE AS46764-1-1978 AS46764 Spacer, Sleeve (Metric), Thin Wall - Stainless Steel
  • SAE AS46765-1-1978 AS46765 Spacer, Sleeve (Metric), Thick Wall - Stainless Steel
  • SAE MA2155/5-1991 Clamp, Rectangular Loop, Cushioned, with Wedge, High Temperature, Stainless Steel, Metric
  • SAE AE-7-1991 Universal Joint and Driveshaft Design Manual IMAGES NOT INCLUDED; PLEASE REFER TO GLOBAL

Professional Standard - Military and Civilian Products, Do not crawl

  • WJ 2145-1993 ZS-401 Specification for Unsaturated Polyester Coating Sheet

PL-PKN, Do not crawl

  • PN H93427-54-1988 Steel Finned sections and finned base plates for track structure Finned base-plate assymetrical Ps49 dimensions
  • PN M58354-1986 Tool holders for indexable throwaway) inserts
  • PN C99021 ArkusZ04-1973 Defects of light sensitive photogra- fic materials Characteristic of defects of colour materials on flexi!ble and opa?ue film base
  • PN C99151-1969 Photographic materiels. Industrial radiographic films. Sensifometric test method by meanj of gamma radiation without in?ensifylng screens

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Do not crawl

  • GB/T 16935.5-2008 Insulation coordination for equipment within low-voltage systems.Part 5:Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
  • GB/Z 37754-2019 Guidance on clearances and creepage distances in particular for distances equal to or less than 2 mm—Test results of research on influencing parameters

International Electrotechnical Commission (IEC), Do not crawl

  • IEC 60664-5:2007 Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm

AIA/NAS - Aerospace Industries Association of America Inc., Do not crawl

  • NAS43-1945 Spacers - Screw and Bolt (Rev 1 ***NOT AVAILABLE AT IHS***)

European Committee for Electrotechnical Standardization（CENELEC）, Do not crawl

  • EN 60664-5:2007 Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm

CENELEC - European Committee for Electrotechnical Standardization, Do not crawl

  • EN 60664-5:2003 Insulation coordination for equipment within low-voltage systems Part 5: A comprehensive method for determining clearances and creepage distances equal to or less than 2 mm

Japanese Industrial Standards Committee (JISC), Do not crawl

  • JIS C 60664-5:2009 Insulation coordination for equipment within low-voltage systems -- Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm

SE-SIS, Do not crawl

  • SIS SS 424 11 04-1978 Overhead line material — Unequal sided catch arms, type FO
  • SIS SS 424 11 06-1978 Overhead line material — Base brackets for equilateral and unequal sided catch arms
  • SIS SS 2663-1988 Indexable hardmetal (carbide) inserts for milling cutters — Inserts with wiper edges, without fixing hole — Asymmetrical triangular — Dimensions of inserts with 90° cutting edges angle, 11° normal clearance and 15° wiper edge normal clearance
  • SIS SS-ISO 7008:1984 Woodworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and acceptance conditions

CH-SNV, Do not crawl

IN-BIS, Do not crawl

International Telecommunication Union (ITU), Do not crawl

AT-ON, Do not crawl

  • OENORM EN 12326-3-2021 Slate and stone for discontinuous roofing and external cladding - Part 3: Specifications for schist and schistose stones

European Committee for Standardization (CEN), Do not crawl

  • prEN 12326-3-2021 Slate and stone for discontinuous roofing and external cladding - Part 3: Specifications for schist and schistose stones
  • prEN 12326-3 Slate and stone for discontinuous roofing and external cladding - Part 3: Specifications for schist and schistose stones
  • EN 2546:1988 Aerospace series; Washers, lock with radial serrations in corrosion resisting steel; Dimensions
  • EN ISO 5754:2023 Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2023)
  • EN 2546:1988/AC1:1988 Aerospace series; washers, lock with radial serrations in corrosion resisting steel; dimensions; amendment to EN 2546:1988.01
  • EN 508-1:2008 Roofing products from metal sheet - Specification for selfsupporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
  • EN 508-1:2021 Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
  • EN 508-1:2014 Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel

American Society for Testing and Materials (ASTM), Do not crawl

  • ASTM C662-70(1998) Standard Specification for Impervious Graphite Pipe and Threading
  • ASTM C662-70(2010) Standard Specification for Impervious Graphite Pipe and Threading
  • ASTM A982-00 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
  • ASTM A982-01 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
  • ASTM A982/A982M-10 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
  • ASTM A982/A982M-05(2010) Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
  • ASTM A982/A982M-10(2015) Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
  • ASTM A1010/A1010M-13 Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
  • ASTM A1028-03(2015) Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
  • ASTM E446-10 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
  • ASTM A480/A480M-13a Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
  • ASTM A480/A480M-13b Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
  • ASTM A480/A480M-14 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
  • ASTM A480/A480M-14a Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
  • ASTM A240/A240M-09b Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
  • ASTM E387-84(1995)e1 Standard Test Method for Estimating Stray Radiant Power Ratio of Spectrophotometers by the Opaque Filter Method
  • ASTM A240/A240M-12a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

ANSI - American National Standards Institute, Do not crawl

  • Z80.1-1987 Ophthalmics - Prescription Ophthalmic Lenses - Recommendations *NOT CURRENT DOCUMENT (VC)

GM Europe, Do not crawl

  • GME QA 612113-1988 Asbestfreier, 鰈- und kraftstoffbest鋘diger Dichtungswerkstoff Asbestos Free, Oil and Fuel Resistant Gasket Material German

European Association of Aerospace Industries, Do not crawl

International Organization for Standardization (ISO), Do not crawl

  • ISO 8001:1984 Cinematography; Underexposed motion-picture film requiring forced development; Designation method
  • ISO 11833-1:2019 Plastics — Unplasticized poly(vinyl chloride) sheets — Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm
  • ISO/TR 21828:2010 Guidance on standards available for preparation and testing of monolithic, unshaped refractory products
  • ISO 5754:2023 Sintered metal materials, excluding hardmetals — Unnotched impact test piece
  • ISO 10577:2012 Resilient floor coverings - Specification for rubber sheet floor coverings without backing
  • ISO 162:1975 Cinematography — Recording and reproducing head gaps for three magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions
  • ISO 360:1975 Cinematography — Recording and reproducing head gaps for four magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions
  • ISO 1753:1975 Cinematography — Recording and reproducing head gaps for six-track magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions
  • ISO 4834:1986 Cinematography — Magnetic sound test films excluding striped release prints — Basic technical characteristics

U.S. Military Regulations and Norms, Do not crawl

ATIS - Alliance for Telecommunications Industry Solutions, Do not crawl

  • 0600029-2013 Standard for Irreversible Compression Lugs@ Inline Splices@ and Taps

Alliance of Telecommunications Industry Solutions （ATIS), Do not crawl

  • ATIS 0600029-2013 Standard for Irreversible Compression Lugs, Inline Splices, and Taps

RU-GOST R, Do not crawl

  • GOST 18883-1973 Carbide-tipped boring turning tools for blind holes. Design and dimensions
  • GOST 21540-1976 Carbide tipped counterbores for machining stainless and high-temperature steels and alloys. Design and dimensions
  • GOST 21541-1976 Carbide tipped inserted brade counterbores for machining stainless and high-temperature steels and alloys. Design and dimensions

Aerospace Industries Association, Do not crawl

  • AIA NAS 43-1993 Spacer, Sleeve - Screw and Bolt (Segments Inactive for New Design) Rev. 10

British Standards Institution (BSI), Do not crawl

  • 23/30452437 DC BS EN 1514-1. Flanges and their joints. Dimensions of gaskets for PN-designated flanges - Non-metallic flat gaskets with or without inserts
  • BS 4361-5:1988 Woodworking machines. Specification for single blade circular saw benches with or without travelling table
  • 21/30422046 DC BS EN 12326-3. Slate and stone for discontinuous roofing and external cladding - Part 3. Specifications for schist and schistose stones
  • 23/30452433 DC BS EN 12560-1. Flanges and their joints. Dimensions of gaskets for Class-designated flanges - Part 1. Non-metallic flat gaskets with or without inserts
  • PD ISO/TS 13399-202:2015 Cutting tool data representation and exchange. Creation and exchange of 3D models. Irregular inserts

TR-TSE, Do not crawl

  • TS 2723-1977 Transparent A6 Size Microfiche Of Variable Division - Image Arrangements A And B

ES-UNE, Do not crawl

  • UNE-EN ISO 11833-1:2020 Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019)

Indonesia Standards, Do not crawl

  • SNI ISO 11833-1:2011 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Do not crawl

  • GB/T 34580-2017 Standard test method for measurement of lubricant generated insoluble color bodies in in-service turbine oils—Membrane patch colorimetry

UY-UNIT, Do not crawl

Military Standards (MIL-STD), Do not crawl

  • DOD A-A-51718 A-1987 GUAIFENESIN TABLETS, MODIFIED (SUSTAINED-RELEASE) [Use In Lieu Of: DOD A-A-0051718]
  • DOD A-A-51704 A-1987 DEXBROMPHENIRAMINE MALEATE AND PSEUDOEPHEDRINE SULFATE TABLETS, (SUSTAINED-RELEASE) [Use In Lieu Of: DOD A-A-0051704]

GM North America, Do not crawl

  • GMP.PMMA.006-2010 Acrylic - Exterior Lens Issue 4; Do Not Use on New Programs; Replaced by GMW16335
  • GM252M-2011 Coil Coated Adhesive - Sheet Stock Issue 2; Do Not Use on New Programs; No Replacement
  • GM GM6433M-2015 Performance Requirements for Engine Cover Gaskets (Issue 4; Do Not Use on New Programs; Replaced by GMW17377)
  • GMP.PMMA.007-2010 Acrylic - Exterior Lenses, High Molecular Weight Issue 3; Do Not Use on New Programs; Replaced by GMW16335
  • GM GMP.PP.119-2013 Polypropylene - 45% Glass/Mineral Reinforced, Sheet, ISO Tests (Issue 2; Do Not Use on New Programs; Replaced by GMW16902)

Defense Logistics Agency, Do not crawl

  • DLA SMD-5962-94710-1994 MICROCIRCUIT, DIGITAL, QUAD UNIVERSAL ASYNCHRONOUS RECEIVER/TRANSMITTER (QUART) MONOLITHIC SILICON

RO-ASRO, Do not crawl

  • STAS 10484-1985 Micrographics TRANSPARENT A6 SIZE MICROFICHES OF UNIFORM DIVISION AND VARIABLE DIVISION
  • STAS 8248-1982 Woodworking machines SINGLE BLADE CIRCULAR SAW BENCHES WITH OR WITHOUT TRAVELLING TABLE Acceptance conditions

ZA-SANS, Do not crawl

  • SANS 5193:1975 Volatile and non-volatile matter content of paints, lacquers, and varnishes (glass-slide method)

AR-IRAM, Do not crawl

KR-KS, Do not crawl

  • KS B ISO 7008-2012 Woodworking machines－Single blade circular saw benches with or without travelling table－Nomenclature and acceptance conditions
  • KS A ISO 4834-2003(2023) Cinematography - Magnetic sound test films excluding striped release prints - Basic technical characteristics
  • KS M ISO 11833-1-2018 Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm

CZ-CSN, Do not crawl

  • CSN ISO 7008:1994 Woodworking machines. Single blade circular saw benches with or without travelling table. Nomenclature and acceptance conditions

CU-NC, Do not crawl

  • NC 64-05-1988 Photography Application and Technique. Cinematography. Underexposed Motion-Picture Film Requiring Forced Development. Designation Method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Do not crawl

  • ASHRAE 3773-1994 Surface Irregularity Effects of Droplets and Retained Condensate on Local Heat Transfer to Finned Tubes in Cross-Flow

American Society of Mechanical Engineers (ASME), Do not crawl

  • ASME SEC V B SE-446-2001 Standard Reference Radiographs for Steel Castings up to 2 in. (51 mm) in Thickness ASTM E446-93; DELETED

  Crawl, How to crawl, how to crawl, Climbing film, Do not crawl, why crawl, After climbing, Just climbed, Scraping method, Climb 2, how to crawl, Scraping method, time slice, Scraping technology, Climbing dish, Special crawler, slide method, how long to climb, slide method, Pros and cons.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved