ZH

RU

ES

nickel infrared

nickel infrared, Total:497 items.

In the international standard classification, nickel infrared involves: Ferroalloys, Non-ferrous metals, Testing of metals, Iron and steel products, Metalliferous minerals, Optical equipment, Audio, video and audiovisual engineering, Domestic, commercial and industrial heating appliances, Products of non-ferrous metals, Pharmaceutics, Industrial furnaces, General methods of tests and analysis for food products, Lamps and related equipment, Lubricants, industrial oils and related products, Analytical chemistry, Materials for aerospace construction, Animal feeding stuffs, Edible oils and fats. Oilseeds, Semiconducting materials, Construction industry, Products of the textile industry, Rubber, Paper and board, Thermodynamics and temperature measurements, Vocabularies, Fuels, Air quality, Protection of and in buildings, Ferrous metals, Power stations in general, Optics and optical measurements, Medical equipment, Organic chemicals, Fibre optic communications, Non-destructive testing, Geology. Meteorology. Hydrology, Water quality, Open systems interconnection (OSI), Products of the chemical industry, Wastes, Insulating fluids, Construction materials, Elements of buildings, Petroleum products in general, Soil quality. Pedology, Linear and angular measurements, Paints and varnishes, Materials for the reinforcement of composites, Protection against crime, Kitchen equipment, Cereals, pulses and derived products, Farming and forestry, Powder metallurgy, Electromagnetic compatibility (EMC), Aerospace electric equipment and systems, On-board equipment and instruments, Raw materials for rubber and plastics, Body care equipment, Fertilizers, Radiation protection, Inorganic chemicals, Coals, Protective equipment, Non-metalliferous minerals, Milk and milk products, Bridge construction, Tobacco, tobacco products and related equipment, Crude petroleum, Beverages, Energy and heat transfer engineering in general, Telecommunications in general, Electrical accessories, Medical sciences and health care facilities in general, Nuclear energy engineering, Optoelectronics. Laser equipment, Environmental protection.


General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, nickel infrared

  • GB/T 21931.1-2008 Nickel,ferronickel and nickel alloys.Determination of carbon content.Infrared absorption method afer induction furnace combustion
  • GB/T 21931.2-2008 Nickel,ferronickel and nickel alloys.Determination of sulfur content.Infrared absorption method after induction furnace combustion
  • GB/T 8647.8-2006 The methods for chemical analysis of nickel. Determination of sulphur content. Infra-red absorption method after high frequency induction furnace combustion
  • GB/T 8647.9-2006 The methods for chemical analysis of nickel. Determination of carbon content. Infra-red absorption method after high frequency induction furnace combustion
  • GB/T 8647.9-1988 Nickel--Determination of sulphur content--Infra-red absorption method after high frequency induction furnace combustion
  • GB/T 8647.10-1988 Nickel--Determination of carbon content--Infra-red absorption method after high frequency induction furnace combustion
  • GB/T 9389-1988 Sound transmission using infra-red radiation
  • GB/T 18497.1-2001 Characteristics of electric infra-red emitters for industrial heating Part 1: Short wave infra-red emitters
  • GB/T 42905-2023 Infrared reflection method for measuring the thickness of silicon carbide epitaxial layer
  • GB/T 7287.1-1987 Detecting method for size, shape and exterior of infrared heater
  • GB/T 4701.8-2009 Ferrotitanium-Determination of carbon content-The infrared absorption method
  • GB/T 30127-2013 Textiles.Testing and evaluation for far infrared radiation properties
  • GB/T 3653.7-2020 Ferroboron—Determination of sulfur content—Infrared absorption method
  • GB/T 5059.7-2014 Ferromolybdenum.The determination of carbon content.Infrared absorption method
  • GB/T 18319-2001 Textiles-Testing method for thermal retention with accumulated by infrared ray
  • GB/T 24583.4-2009 Vanadium.Nitrogen alloy.Determination carbon of content.The infrared absorption method
  • GB/T 24583.6-2009 Vanadium-Nitrogen alloy.Determination of sulfur content.The infrared absorption method
  • GB/T 24583.7-2009 Vanadium-Nitrogen alloy.Determination of oxygen content.The infrared absorption method
  • GB/T 9801-1988 Air quality--Determination of carbon monoxide--Non-disperisive infrared spectrometry
  • GB/T 14847-1993 Test method for thickness of lightly doped silicon eqitaxial layers on heavily doped silicon substrates by infrared reflectance
  • GB/T 14847-2010 Test method for thickness of lightly doped silicon epitaxial layers on heavily doped silicon substrates by infrared reflectance
  • GB/T 16488-1996 Water quality--Determination of petroleum oil, animal and vegetable oils--Infrared photometric method
  • GB/T 1557-1989 The method of determining interstitial oxygen content in silicon by infrared absorption
  • GB/T 1557-2006 The method of determining interstitial oxygen content in silicon by infrared absorption
  • GB/T 32888-2016 Screening Infrared Spectrometry of Organotins in Electronic and Electrical Products
  • GB/T 13193-1991 Water quality--Determination of TOC by nondispersive infrared absorption method
  • GB/T 10066.12-2006 Test methods for electroheat installations.Part 12:Infrared heating installations
  • GB 13193-1991 Determination of total organic carbon (TOC) in water by non-dispersive infrared absorption method
  • GB/T 26051-2010 Hardmetals.Determination of sulfur and carbon contents in cobalt metal powders.Infrared detection method
  • GB/T 16609-1996 Guide to uses of infra-red transmission and the prevention or control of interference between systems
  • GB 4706.85-2008 Household and similar electrical appliances.Safety.Particular requirements for skin exposure to ultraviolet and infrared radiation
  • GB/T 223.82-2018 Steel and iron.Determination of hydrogen content.Thermal conductivity/infrared method after fusion under inert gas
  • GB/T 8570.6-1988 Liquefied anhydrous ammonia--Determination of oil content--Gravimetric and infra-red methods
  • GB/T 5059.9-2008 Ferromolybdenum.Determination of sulfur content.The infrared absorption method and the combustion-iodate volumetric method
  • GB/T 8704.1-2009 Ferrovanadium-Determination of carbon content-The infrared absorption method and the gasometric method
  • GB/T 6730.61-2005 Iron ores-Determination of carbon and sulfur content-High frequency combustion with infrared absorption method
  • GB/T 6730.61-2022 Iron ores—Determination of carbon and sulfur content—High frequency combustion with infrared absorption method
  • GB/T 23356-2009 Cigarettes.Determination of carbon monoxide in the vapour phase of cigarette smoke.NDIR method
  • GB/T 19199-2015 Test methods for carbon acceptor concentration in semi-insulating gallium arsenide single crystals by infrared absorption spectroscopy
  • GB/T 19199-2003 Test method for carbon concentration of semi-insulating monocrystal gallium arsenide by measurement infrared absorption method
  • GB/T 32573-2016 Determination of total carbon content of silicon powder Infrared absorption method after combustion in induction furnace

SE-SIS, nickel infrared

  • SIS SS-EN 27 526-1992 Nickel, ferronickel and nickel alloys — Determination of sulfur content — Infra- red absorption method after induction furnace combustion
  • SIS SS-IEC 764:1990 Sound transmission using infra-redradiation
  • SIS SS-EN 24 935-1992 Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace
  • SIS SS 02 81 03-1991 Determination of fat in wastewater from food processing industries — Infrared spectrophotometric method

Danish Standards Foundation, nickel infrared

  • DS/EN 27526:1993 Nickel, ferronickel and nickel alloys. Determination of sulfur content. Infra-red absorption method after induction furnace combustion
  • DS/ISO 7526:1993 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustion
  • DS/R 209:1980 Determination of oil and grease in water. Infrared spectrophotometric method
  • DS/EN 480-6:2005 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
  • DS/EN 62693:2013 Industrial electroheating installations - Test methods for infrared electroheating installations
  • DS/EN 15948:2020 Cereals – Determination of moisture and protein – Method using Near-Infrared Spectroscopy in whole kernels
  • DS/EN 24935:1993 Steel and iron. Determination of sulfur content. Infrared absorption method after combustion in an induction furnace
  • DS/EN ISO 13884:2005 Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry
  • DS/ISO 4935:1993 Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
  • DS/EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace

YU-JUS, nickel infrared

  • JUS C.A1.703-1987 Nickel metal, ferronickel and nickel alloys. Determination of carbon content. Infra-red absorption met-hod after induction fumace combustion
  • JUS H.F8.153-1986 Gases. Determination of carbon dioxid content. Infrared spectrophotometric method

International Organization for Standardization (ISO), nickel infrared

  • ISO 7524:1985 Nickel, ferronickel and nickel alloys; determination of carbon content; infra-red absorption method after induction furnace combustion
  • ISO 7526:1985 Nickel, ferronickel and nickel alloys; Determination of sulfur content; Infra-red absorption method after induction furnace combustion
  • ISO 7524:2020 Ferronickels — Determination of carbon content — Infrared absorption method after induction furnace combustion
  • ISO 7526:2020 Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion
  • ISO 17053:2005 Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas
  • ISO 17184:2014 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS)
  • ISO 4224:2000 Ambient air - Determination of carbon monoxide - Non-dispersive infrared spectrometry method
  • ISO 4689-3:2004 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
  • ISO 4689-3:2017 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
  • ISO 4689-3:2015 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
  • ISO 6781:1983 Thermal insulation; Qualitative detection of thermal irregularities in building envelopes; Infrared method
  • ISO 23291:2020 Milk and milk products — Guidelines for the application of in-line and on-line infrared spectrometry
  • ISO/PRF 13093:1972 Titanium and titanium alloys — Determination of carbon — Infrared absorption method after combustion in an induction furnace
  • ISO 13093:2023 Titanium and titanium alloys — Determination of carbon — Infrared absorption method after combustion in an induction furnace
  • ISO 22963:2008 Titanium and titanium alloys - Determination of oxygen - Infrared method after fusion under inert gas
  • ISO 4935:1990 Steel and iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace
  • ISO 4852:1978 Personal eye-protectors; Infra-red filters; Utilisation and transmittance requirements
  • ISO/DIS 24476 Steel – Determination of oxygen – Infrared absorption method after fusion under inert gas (Routine method)

Korean Agency for Technology and Standards (KATS), nickel infrared

  • KS D ISO 7524:2012 Nickel, ferronickel and nickel alloys-Determination of carbon content-Infra-red absorption method after induction furnace combustion
  • KS D ISO 7526:2012 Nickel, ferronickel and nickel alloys-Determination of sulfur content-Infra-red absorption method after induction furnace combustion
  • KS D ISO 7526-2012(2017) Nickel, ferronickel and nickel alloys-Determination of sulfur content-Infra-red absorption method after induction furnace combustion
  • KS D ISO 7524-2012(2017) Nickel, ferronickel and nickel alloys-Determination of carbon content-Infra-red absorption method after induction furnace combustion
  • KS L 2013-1978(1996) ABSORBENT GLASS OF INFRARED RAY FOR OPTICS
  • KS D ISO 9722:2003 Nickel and nickel alloys-Composition and form of wrought products
  • KS D ISO 9722:2013 Nickel and nickel alloys-Composition and form of wrought products
  • KS C IEC 60240-1:2005 Characteristics of electric infra-red emitters for industrial heating-Part 1:Short wave infra-red emitters
  • KS C IEC 60240-1:2020 Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters
  • KS E ISO 4689-3:2006 Iron ores-Determination of sulfur content-Part 3:Combustion/infrared method
  • KS D ISO 17053-2006(2016) Steel and iron-Determination of oxygen-Infrared method after fusion under inert gas
  • KS E ISO 4689-3:2017 Iron ores-Determination of sulfur content-Part 3:Combustion/infrared method
  • KS M 6688-1996(2001) IDENTIFICATION OF RUBBER ELASTOMERS BY INFRARED SPECTROPHOTOMETRY
  • KS M 6688-1986 IDENTIFICATION OF RUBBER ELASTOMERS BY INFRARED SPECTROPHOTOMETRY
  • KS X 6916-2006 Conformity Assessment in Infrared DSRCStandard for ITS applications
  • KS M ISO 12965-2007(2017) Butadiene rubber-Determination of microstructure by infra-red spectrometry
  • KS D ISO 17053:2006 Steel and iron-Determination of oxygen-Infrared method after fusion under inert gas
  • KS D ISO 17053:2021 Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas
  • KS E ISO 4689-3:2022 Iron ores ― Determination of sulfur content ― Part 3: Combustion/infrared method
  • KS I ISO 4224:2006 Ambient air-Determination of carbon monoxide-Non-dispersive infrared spectrometry method
  • KS M 5506-2011(2021) Testing method for infrared reflectance (from spectrophotometric date)
  • KS D ISO 9556:2021 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
  • KS D ISO 9556-2001(2016) Steel and iron-Determination of total carbon content-Infrared absorption method after combustion in an induction furnace
  • KS D ISO 4935:2002 Steel and iron-Determination of total sulphur content-Infrared absorption method after combustion in an induction furnace
  • KS I ISO 4224-2006(2016) Ambient air-Determination of carbon monoxide-Non-dispersive infrared spectrometry method
  • KS D ISO 4935-2002(2022) Steel and iron-Determination of total sulphur content-Infrared absorption method after combustion in an induction furnace
  • KS D ISO 22963-2010(2020) Titanium and titanium alloys-Determination of oxygen-Infrared method after fusion under inert gas
  • KS D ISO 4935-2002(2017) Steel and iron-Determination of total sulphur content-Infrared absorption method after combustion in an induction furnace
  • KS D ISO 13902:2002 Steel and iron-Determination of high sulfur content-Infrared absorption method after combustion in an induction furnace
  • KS D 2717-2008(2018) Evaluation of metallic/semiconducting ratio of single-walled carbon nanotube soots using UV-VIS-NIR absorption spectroscopy
  • KS D ISO 9556:2001 Steel and iron-Determination of total carbon content-Infrared absorption method after combustion in an induction furnace
  • KS E ISO 9686-2011(2016) Direct reduced iron-Determination of carbon and/or sulfur-High-frequency combustion method with infrared measurement
  • KS E ISO 9686-2011(2021) Direct reduced iron-Determination of carbon and/or sulfur-High-frequency combustion method with infrared measurement
  • KS I ISO 4224:2021 Ambient air — Determination of carbon monoxide —Non-dispersive infrared spectrometric method

AENOR, nickel infrared

  • UNE-EN 27526:1992 NICKEL, FERRONICKEL AND NICKEL ALLOYS. DETERMINATION OF SULFUR CONTENT. INFRARED ABSORPTION METHOD AFTER INDUCTION FURNACE COMBUSTION (ISO 7526:1985)
  • UNE 48236:1995 PAINTS AND VARNISHES. DETERMINATION OF INFRARED SPECTRUM OF VEHICLE SOLIDS.
  • UNE 84025:2002 Cosmetic raw materials. Preparation of infrared spectra. Solution technique.
  • UNE 84026:2002 Cosmetic raw materials. Preparation of infrared spectra. Pressed pellet technique.
  • UNE-EN 480-6:2006 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
  • UNE 77252:2003 Ambient air. Determination of carbon monoxide. Non-dispersive infrared spectrometry method.

European Committee for Standardization (CEN), nickel infrared

  • EN 27526:1991 Nickel, Ferronickel and Nickel Alloys - Determination of Sulfur Content - Infra-Red Absorption Method After Induction Furnace Combustion
  • EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020)
  • HD 455 S1-1985 Sound transmission using infra-red radiation
  • prEN 238-1985 Liquid petroleum products; determination of the benzene content; infrared spectrometric method

Lithuanian Standards Office , nickel infrared

  • LST EN 27526-2001 Nickel, ferronickel and nickel alloys - Determination of sulphur content - Infra-red absorption method after induction furnace combustion (ISO 7526:1985)
  • LST EN 60240-1-2001 Characteristics of electric infra-red emitters for industrial heating. Part 1: Short wave infra-red emitters (IEC 60240-1:1992)
  • LST EN 480-6-2006 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
  • LST ISO 4224:2001 Ambient air. Determination of carbon monoxide. Non-dispersive infrared spectrometry method

German Institute for Standardization, nickel infrared

  • DIN EN 27526:1992 Nickel, ferronickel and nickel alloys; determination of sulfur content; infra-red absorption method after induction furnace combustion (ISO 7526:1985); german version EN 27526:1991
  • DIN EN ISO 21789:2020-06 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020); German version EN ISO 7526:2020
  • DIN EN ISO 7526:2020-06 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020); German version EN ISO 7526:2020
  • DIN EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020)
  • DIN 51820:2013-12 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum / Note: Applies in conjunction with DIN 51451 (2004-09).
  • DIN 51820:2013 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum
  • DIN EN 60240-1:1995-07 Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters (IEC 60240-1:1992); German version EN 60240-1:1994
  • DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
  • DIN 50437:1979 Testing of semi-conductive inorganic materials; measuring the thickness of silicon epitaxial layer thickness by infrared interference method
  • DIN EN ISO 9556:2002-04 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989); German version EN ISO 9556:2001
  • DIN 51453:2004-10 Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method

Association Francaise de Normalisation, nickel infrared

  • NF A10-621:1992 Nickel, ferronickel and nickel alloys. Determination of sulfur content. Infra-red absorption method after induction furnace combustion.
  • NF EN ISO 7526:2020 Ferronickels - Détermination de la teneur en soufre - Méthode par absorption dans l'infrarouge après combustion dans un four à induction
  • NF A54-106*NF ISO 7524:2020 Ferronickels - Determination of carbon content - Infrared absorption method after induction furnace combustion
  • NF A10-621*NF EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion
  • NF ISO 7524:2020 Ferronickels - Détermination de la teneur en carbone - Méthode par absorption dans l'infrarouge après combustion dans un four à induction
  • NF EN 60240-1:1995 Caractéristiques des émetteurs électriques d'infrarouge pour chauffage industriel - Partie 1 : émetteurs d'infrarouge court.
  • NF X20-301:1978 Gas analysis by absorption of a non dispersive infra-red radiation beam.
  • NF A09-420:1993 Non destructive testing. Infrared thermography. Characterization of equipment.
  • NF C79-653*NF EN 62693:2014 Industrial electroheating installations - Test methods for infrared electroheating installations
  • NF X31-016*NF EN ISO 17184:2014 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS)
  • NF A09-421:1993 Non destructive testing. Infrared thermography. Methods for characterization of equipment.
  • NF A06-391*NF EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
  • NF A09-400:1991 Non destructive testing. Infrared thermography. Vocabulary concerning the designation of the equipment.
  • NF A06-367*NF EN 24935:1992 Steel and iron. Determination of sulfur content. Infrared absorption method after combustion in an induction furnace.

AT-ON, nickel infrared

  • ONORM EN 27526-1992 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustion

British Standards Institution (BSI), nickel infrared

  • BS 6783-7:1986 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
  • BS 6783-5:1986 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of carbon in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
  • BS EN ISO 7526:2020 Tracked Changes. Ferronickels. Determination of sulfur content. Infrared absorption method after induction furnace combustion
  • BS ISO 7524:2020 Tracked Changes. Ferronickels. Determination of carbon content. Infrared absorption method after induction furnace combustion
  • 19/30387212 DC BS ISO 7524. Ferronickel. Determination of carbon content. Infra-red absorption method after combustion in an induction furnace (Routine method)
  • BS EN 60240-1:1994 Characteristics of electric infra-red emitters for industrial heating. Short wave infra-red emitters
  • 19/30387215 DC BS EN ISO 7526. Ferronickels. Determination of sulfur content. Infra-red absorption method after combustion in an induction furnace [Routine method]
  • BS EN 13187:1999 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method
  • BS ISO 4689-3:2015 Iron ores. Determination of sulfur content. Combustion/infrared method
  • BS ISO 4689-3:2004 Iron ores - Determination of sulfur content - Combustion/infrared method
  • BS ISO 4689-3:2017 Iron ores. Determination of sulfur content. Combustion/infrared method
  • BS EN 60519-12:2013 Safety in electroheating installations. Particular requirements for infrared electroheating installations
  • BS EN 62693:2013 Industrial electroheating installations. Test methods for infrared electroheating installations
  • BS EN ISO 17184:2014 Soil quality. Determination of carbon and nitrogen by near-infrared spectrometry (NIRS)
  • BS ISO 22963:2008 Titanium and titanium alloys - Determination of oxygen - Infrared method after fusion under inert gas
  • BS DD CLC/TS 50131-2-2:2004 Alarm systems - Intrusion systems - Requirements for passive infrared detectors
  • BS 7693:1993 Guide to uses of infra-red transmission and the prevention or control of interference between systems
  • BS EN 60335-2-27:2003 Specification for safety of household and similar electrical appliances. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
  • BS ISO 17053:2005 Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas
  • 23/30462727 DC BS EN 480-6. Admixtures for concrete, mortar and grout. Test methods - Part 6. Infrared analysis
  • PD IEC/TS 62446-3:2017 Photovoltaic (PV) systems. Requirements for testing, documentation and maintenance. Photovoltaic modules and plants. Outdoor infrared thermography
  • BS EN 12470-5:2003 Clinical thermometers. Performance of infra-red ear thermometers (with maximum device)

Indonesia Standards, nickel infrared

ES-UNE, nickel infrared

  • UNE-EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020) (Endorsed by Asociación Española de Normalización in May of 2020.)
  • UNE-EN 60240-1:1994 CHARACTERISTICS OF ELECTRIC INFRA-RED EMITTERS FOR INDUSTRIAL HEATING. PART 1: SHORT WAVE INFRA-RED EMITTERS. (Endorsed by AENOR in April of 1996.)
  • UNE 84026:2018 Cosmetic raw materials. Preparation of infrared spectra for solid raw materials
  • UNE-EN 62798:2014 Industrial electroheating equipment - Test methods for infrared emitters (Endorsed by AENOR in November of 2014.)
  • UNE-EN 62693:2013 Industrial electroheating installations - Test methods for infrared electroheating installations (Endorsed by AENOR in October of 2013.)

BE-NBN, nickel infrared

KR-KS, nickel infrared

  • KS D ISO 7524-2022 Ferronickels — Determination of carbon content — Infrared absorption method after induction furnace combustion
  • KS D ISO 7526-2022 Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion
  • KS C IEC 60240-1-2020 Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters
  • KS D ISO 17053-2021 Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas
  • KS E ISO 4689-3-2022 Iron ores ― Determination of sulfur content ― Part 3: Combustion/infrared method
  • KS E ISO 4689-3-2017 Iron ores-Determination of sulfur content-Part 3:Combustion/infrared method
  • KS D ISO 9556-2021 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
  • KS I ISO 4224-2021 Ambient air — Determination of carbon monoxide —Non-dispersive infrared spectrometric method

Professional Standard - Non-ferrous Metal, nickel infrared

  • YS/T 820.16-2012 Methods for chemical analysis of laterite nickel ores.Part 16:Determination of carbon and sulfur content.High frequency combustion with infrared absorption spectrometry
  • YS/T 951-2014 Laterite nickel ores.Determination of moisture content of a consignment
  • YS/T 953.9-2014 Methods for chemical analysis of fire smelting nickel substrate material.Part 9:Determination of carbon and sulfur contents.Infrared absorption method after high frequency combustion
  • YS/T 539.13-2009 Methods for chemical analysis of nickel base alloy powder.Part 13:Determination of oxygen content.The pulse heating inert gas fusion-infrared absorption method
  • YS/T 1058-2015 Nickel, cobalt, manganese three-element composite oxide chemical analysis method Determination of sulfur content High-frequency induction furnace combustion infrared absorption method
  • YS/T 820.1-2012 Methods for chemical analysis of laterite nickel ores.Part 1:Determination of nikel content.Flame atomic absorption spectrometry
  • YS/T 820.2-2012 Methods for chemical analysis of laterite nickel ores.Part 2:Determination of nickel content.Dimetylglyoxime spectrophotometry
  • YS/T 514.3-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 3:Determination of sulfur content.High frequency infrared absorption method
  • YS/T 514.10-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 10:Determination of carbon content.High frequency infrared absorption method
  • YS/T 820.20-2012 Methods for chemical analysis of laterite nickel ores.Part 20:Determination of aluminum content.EDTA titration
  • YS/T 820.22-2012 Methods for chemical analysis of laterite nickel ores.Part 22:Determination of magnesium content.EDTA titration
  • YS/T 1035-2015 Determination of carbon content in aluminum electrolyte.IR absorption spectrometry method
  • YS/T 820.24-2012 Methods for chemical analysis of laterite nickel ores.Part 24:Determination hygroscopic moisture content.Gravimetric method
  • YS/T 820.25-2012 Methods for chemical analysis of laterite nickel ores.Part 25:Determination of combined water content.Gravimetric method
  • YS/T 820.26-2012 Methods for chemical analysis of laterite nickel ores.Part 26:Determination of loss on ignition.Gravimetric method
  • YS/T 820.19-2012 Methods for chemical analysis of laterite nickel ores.Part 19:Determination of aluminum,chromium,iron,magnesium,manganese,nickel and silicon contents.Energy-dispersive X-ray fluorescence spectrometry
  • YS/T 820.4-2012 Methods for chemical analysis of laterite nickel ores.Part 4:Determination of phosphorus content.Phosphorus molybdenum blue spectrophotometry
  • YS/T 820.11-2012 Methods for chemical analysis of laterite nickel ores.Part 11:Determination of fluorine and chlorine contents.Ion chromatography

ES-AENOR, nickel infrared

European Committee for Electrotechnical Standardization(CENELEC), nickel infrared

  • HD 455-1985 Sound Transmission Using Infra-Red Radiation
  • EN 60240-1:1994 Characteristics of Electric Infra-Red Emitters for Industrial Heating Part 1: Short Wave Infra-Red Emitters
  • EN 62693:2013 Industrial electroheating installations - Test methods for infrared electroheating installations

Group Standards of the People's Republic of China, nickel infrared

  • T/BPCT 001-2020 Identification of fresh ginger Infrared spectroscopic method
  • T/CECS 10149-2021 Determination of Concrete Admixture Quality Consistency Infrared Spectroscopy
  • T/IAWBS 007-2018 Test method for thickness of 4H silicon carbide homo-epitaxial layers by infrared reflectance
  • T/SATA 054-2023 Etermination of ethanol concentration in wine - Near infrared spectroscopy method
  • T/CIQA 66-2023 Rapid determination of water content in ores-Far infrared drying method
  • T/CAAP 031-2023 Assessment method of cognitive impairment based on near-infrared cerebral tissue oxygenation
  • T/CSBM 0016-2021 In vitro testing method for nickel ion release of nickel-titanium shape memory alloy bone implant
  • T/CWAN 0029.2-2021 Chemical analysis methods of nickel-based welding materials Part 2: Determination of carbon and sulfur content by infrared absorption method of high-frequency induction furnace combustion
  • T/NTTIC 018-2019 Detection and evaluation of far-infrared properties of household bedding fabrics
  • T/CMES 08006-2020 Determination of Sulfur Content in Carburizers High Frequency Combustion Infrared Absorption Method
  • T/CSTM 00424-2023 Non-destructive testing — Steel products—Characterization and verification of automatic infrared thermography flaw detector
  • T/NXCL 023-2023 Determination of hydrogen and nitrogen in Beryllium— Inert gas fusion infrared absorption/ thermal conductivity method
  • T/NAIA 0152-2022 Determination of alcohol content and total extracts in wine by near-infrared-density method

International Electrotechnical Commission (IEC), nickel infrared

  • IEC 60764:1983 Sound transmission using infra-red radiation
  • IEC 60240-1:1992 Characteristics of electric infra-red emitters for industrial heating; part 1: short wave infra-red emitters
  • IEC TR3 61147:1993 Uses of infra-red transmission and the prevention or control of interference between systems

Japanese Industrial Standards Committee (JISC), nickel infrared

  • JIS R 1803:2005 Method for the spectral radiant energy measurement of far infrared heaters specified in the far infrared region
  • JIS G 1211-3:2018 Iron and steel -- Determination of carbon -- Part 3: Infrared absorption method after combustion
  • JIS A 1423:1983 Simplified test method for emissivity by infrared radio meter
  • JIS G 1211-3:2011 Iron and steel -- Determination of carbon content -- Part 3: Infrared absorption method after combustion
  • JIS A 1423:2017 Simplified test method for normal emissivity by infrared radiation thermometer

国家市场监督管理总局、中国国家标准化管理委员会, nickel infrared

  • GB/T 18497.1-2019 Characteristics of electric infrared emitters for industrial heating—Part 1: Shortwave electric infrared emitters
  • GB/T 18497.2-2019 Characteristics of electric infrared emitters for industrial heating—Part 2: Mediumwave and longwave electric infrared emitters
  • GB/T 4333.10-2019 Ferrosilicon—Determination of carbon content—Infrared absorption method
  • GB/T 7731.10-2021 Ferrotungsten—Determination of carbon content—Infrared absorption method
  • GB/T 24583.7-2019 Vanadium-nitrogen—Determination of oxygen content—Infrared absorption method
  • GB/T 24583.6-2019 Vanadium-nitrogen—Determination of sulfur content—Infrared absorption method
  • GB/T 24583.4-2019 Vanadium-nitrogen—Determination of carbon content—Infrared absorption method
  • GB/T 1557-2018 Test method for determining interstitial oxygen content in silicon by infrared absorption
  • GB/T 39114-2020 Nanotechnologies—Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
  • GB/T 14949.11-2021 Manganese ores—Determination of carbon content—Gravimetric method and infrared absorption method
  • GB/T 38976-2020 Test method for the oxygen concentration in silicon materials—Inert gas fusion infrared detection method
  • GB/T 10066.12-2020 Test methods for electroheating installations—Part 12:Infrared electroheating installations
  • GB/T 36691-2018 Methyl vinyl silicone rubber—Determination of vinyl content—Near infrared spectroscopy

Professional Standard - Electron, nickel infrared

  • SJ 2758-1987 Method of measurement by infrared interference for thickness of homoepitaxial layers
  • SJ/T 11871-2022 Performance requirements for infrared sensors for lighting
  • SJ 3247-1989 Methods of measurement for extended-layer thickness of same-type Gallium arsenide by infra-red interference
  • SJ 3249.3-1989 Methods of measurement for chromium concentration in semi-insulation Gallium arsenide by infra-red absorption
  • SJ/T 10625-1995 Determination method for interstitial atomic oxygen content of germanium by infrared abaorption
  • SJ 2757-1987 Method of measurement by infra-red reflection for charge carrier concentraiton of heavily doped semiconductors
  • SJ/T 11145-1996 Technical requirements and testing methods for infrated remote control system of air-conditioners
  • SJ 3249.2-1989 Methods of measurement for Carbon concentration of semi-insulation Gallicem arsenide single crystal by infra-red absorption
  • SJ 2658.4-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for capacitance

American National Standards Institute (ANSI), nickel infrared

未注明发布机构, nickel infrared

  • BS EN 60240-1:1994(1999) Characteristics of electric infra - red emitters for industrial heating — Part 1 : Short wave infra - red emitters
  • BS EN ISO 13884:2005(2006) Animal and vegetable fats and oils — Determination of isolated trans isomers by infrared spectrometry
  • BS EN ISO 9556:2001(2009) Steel and iron — Determination oftotal carbon content — Infrared absorption method after combustion in an induction furnace

HU-MSZT, nickel infrared

TR-TSE, nickel infrared

  • TS 2784-1977 Characteristics Of Elektnc Infra - Red Emitters For Heating Purposes

U.S. Military Regulations and Norms, nickel infrared

NEMA - National Electrical Manufacturers Association, nickel infrared

Underwriters Laboratories (UL), nickel infrared

American Society for Testing and Materials (ASTM), nickel infrared

  • ASTM E2106-00(2011) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM E1655-00 Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM E1790-00 Standard Practice for Near Infrared Qualitative Analysis
  • ASTM E1790-04 Standard Practice for Near Infrared Qualitative Analysis
  • ASTM E1655-17 Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM E1655-04 Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM E1655-05 Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM E1790-04(2016)e1 Standard Practice for Near Infrared Qualitative Analysis
  • ASTM E2106-00(2019) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM E2758-22 Standard Guide for Selection and Use of Infrared Thermometers
  • ASTM E2758-15a Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
  • ASTM E1790-04(2010) Standard Practice for Near Infrared Qualitative Analysis
  • ASTM E2106-00 Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM E2106-00(2006) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM E2105-00(2010) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
  • ASTM UOP703-98 Carbon on Catalysts by Induction Furnace Combustion and Infrared Detection
  • ASTM E168-67(1977) Standard Recommended Practices for General Techniques Of Infrared Quantitative Analysis
  • ASTM D2357-11 Standard for Qualitative Classification of Surfactants by Infrared Absorption
  • ASTM E2937-18 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
  • ASTM E168-16(2023) Standard Practices for General Techniques of Infrared Quantitative Analysis
  • ASTM E1655-05(2012) Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM E1642-00(2005) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E168-99 Standard Practices for General Techniques of Infrared Quantitative Analysis
  • ASTM E334-01 Standard Practice for General Techniques of Infrared Microanalysis
  • ASTM E1642-00 Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E168-06 Standard Practices for General Techniques of Infrared Quantitative Analysis
  • ASTM E334-01(2007) Standard Practice for General Techniques of Infrared Microanalysis
  • ASTM D3414-98 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM D3414-98(2004) Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM D2357-74(1995)e1 Standard for Qualitative Classification of Surfactants by Infrared Absorption
  • ASTM D2357-74(2003) Standard for Qualitative Classification of Surfactants by Infrared Absorption
  • ASTM E334-01(2013) Standard Practice for General Techniques of Infrared Microanalysis
  • ASTM E1965-98(2023) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
  • ASTM E168-16 Standard Practices for General Techniques of Infrared Quantitative Analysis
  • ASTM E1965-98(2016) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
  • ASTM E2937-13 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
  • ASTM D2357-11(2016) Standard for Qualitative Classification of Surfactants by Infrared Absorption
  • ASTM D3677-10 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E1965-98 Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
  • ASTM E1965-98(2003) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
  • ASTM E1965-98(2009) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
  • ASTM D6122-99 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
  • ASTM D6122-01 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
  • ASTM D6122-09 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
  • ASTM E2224-10 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E932-89(2002) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(1997) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E2758-15a(2021) Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
  • ASTM E932-89(2021) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E2758-15 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
  • ASTM E2758-10 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
  • ASTM D2702-05(2016) Standard Practice for Rubber Chemicals&x2014;Determination of Infrared Absorption Characteristics
  • ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM D3677-00(2004) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM C1153-97 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
  • ASTM D2702-05 Standard Practice for Rubber Chemicals-Determination of Infrared Absorption Characteristics
  • ASTM D2702-94(1998) Standard Practice for Rubber Chemicals-Determination of Infrared Absorption Characteristics
  • ASTM E2224-22 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-23 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM C1153-97(2003)e1 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
  • ASTM C1153-10 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
  • ASTM D3677-00 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E2224-23a Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM F3238-17 Standard Specification for Design and Installation of an Infrared (IR) Searchlight System (USA)
  • ASTM D4788-03(2022) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D2144-07(2021) Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM F3238-17(2023) Standard Specification for Design and Installation of an Infrared (IR) Searchlight System (USA)
  • ASTM D2702-05(2021) Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics
  • ASTM D3677-10(2019) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM D3677-10(2015) Standard Test Methods for Rubber&x2014;Identification by Infrared Spectrophotometry
  • ASTM D4788-88(2001) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM E2847-13 Standard Practice for ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM E2847-13e1 Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM E2847-14 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM E2847-11 Standard Practice for 65279; 65279;Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM D4788-03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM E1934-99a(2005)e1 Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM D6122-06 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
  • ASTM D6122-06e1 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
  • ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM D4788-03(2007) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4053-98(2003) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D2144-94 Standard Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM D2144-01 Standard Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM D2144-01e1 Standard Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM D4788-88(1997) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4053-98 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM E1934-99a Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography

Defense Logistics Agency, nickel infrared

VN-TCVN, nickel infrared

  • TCVN 7875-2008 water.Determination of oil and grease.Partition-infrared method
  • TCVN 4654-3-2009 Iron ores.Determination of sulphur content.Part 3: Combustion/infrared method
  • TCVN 7725-2007 Ambient air.Determination of carbon monoxide.Non-dispersive infrared spectrometric method
  • TCVN 6518-1999 Personal eye-protectors.Infra-red filters.Utilisation and tranmittance requirements

Hunan Provincial Standard of the People's Republic of China, nickel infrared

  • DB43/T 1065-2015 Determination of amino acid in feed by near infrared method
  • DB43/T 2263-2021 Determination of organic carbon and sulfur by tube-type resistance furnace infrared method

Professional Standard - Aerospace, nickel infrared

Sichuan Provincial Standard of the People's Republic of China, nickel infrared

  • DB5115/T 80-2022 Determination of rice fatty acid value by near infrared method
  • DB51/T 1922-2014 Determination of Toluene Content in Gasoline by Infrared Spectroscopy
  • DB51/T 1919-2014 Determination of N-Methylaniline in Gasoline by Infrared Spectrometry
  • DB51/T 1925-2014 Determination of Dimethyl Carbonate in Gasoline by Infrared Spectroscopy
  • DB51/T 1694-2013 Determination of Methanol and Oxygen Content in Gasoline by Infrared Spectroscopy

Canadian Standards Association (CSA), nickel infrared

工业和信息化部, nickel infrared

  • YS/T 1525-2022 Chemical analysis methods for nickel-platinum alloys, determination of oxygen and nitrogen content, pulse-infrared absorption method and thermal conductivity detection method
  • YS/T 1166-2016 Determination method of infrared transmittance of high-purity germanium tetrachloride
  • YB/T 4726.6-2021 Determination of sulfur content in iron-containing dust and mud by infrared absorption method
  • YB/T 4726.8-2021 Determination of carbon content in iron dust mud by infrared absorption method
  • YB/T 4566.9-2016 Determination of vanadium nitride iron oxygen content by infrared absorption method
  • YB/T 4582.10-2017 Determination of carbon content in silicon ferronitride by infrared absorption method
  • YB/T 4582.4-2017 Determination of sulfur content in silicon iron nitride by infrared absorption method
  • YB/T 4566.7-2016 Determination of vanadium iron sulfur content by infrared absorption method
  • YB/T 4566.8-2016 Determination of carbon content of vanadium iron nitride by infrared absorption method
  • YB/T 5316-2016 Determination of carbon content of calcium silicon alloy by high frequency combustion infrared absorption method

Professional Standard - Ferrous Metallurgy, nickel infrared

  • YB/T 5339-2015 Ferrophosphorus.Determination of carbon content.The infrared absorption method
  • YB/T 5341-2015 Ferrophosphorus.Determination of sulfur content.The infrared absorption method
  • YB/T 4311-2012 Molybdenum oxide.Determination of sulfur content.The infrared absorption method
  • YB/T 4312-2012 Molybdenum oxide.Determination of carbon content.The infrared absorption method
  • YB/T 109.6-2012 Silicon barium alloy.Determination of carbon content.The infrared absorption method
  • YB/T 109.7-2012 Silicon barium alloy.Determination of sulfur content.The infrared absorption method
  • YB/T 5333-2009 Determination of sulfur content in vanadium pentoxide by infrared absorption method
  • YB/T 178.6-2008 Determination of carbon content in silicon-aluminum alloy and silicon-barium-aluminum alloy by infrared absorption method

Professional Standard - Forestry, nickel infrared

  • LY/T 2053-2012 Standard method for near infrared qualitative analysis of Wood
  • LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood

Yunnan Provincial Standard of the People's Republic of China, nickel infrared

  • DB53/T 749-2016 Determination of Moisture in Industrial Silica Fume by Infrared Heating Method

Hebei Provincial Standard of the People's Republic of China, nickel infrared

  • DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method

Professional Standard - Light Industry, nickel infrared

  • QB/T 2812-2006 Paper-online determination of weight and moisture (The near infrared method)

IN-BIS, nickel infrared

GM North America, nickel infrared

  • GM GM9035P-1988 Quality Control of Lubricants (Infrared Spectrophotometric)

Professional Standard - Environmental Protection, nickel infrared

  • HJ 1051-2019 Soil Petroleum Determination Infrared Spectrophotometry
  • HJ 695-2014 Soil.Determination of organic carbon.Combustion oxidation nondispersive infrared absorption method
  • HJ 965-2018 Non-dispersive infrared method for automatic determination of carbon monoxide in ambient air
  • HJ/T 71-2001 Water quality-Determination of total organic carbon-Nondispersive infrared absorption method
  • HJ 501-2009 Water quality.Determination of total organic carbon.Combustion oxidation nondispersive infrared absorption method
  • HJ 637-2012 Water quality.Determination of petroleum oils and animal and vegetable oils.Infrared spectrophotometry

Association of German Mechanical Engineers, nickel infrared

  • VDI 3866 Blatt 2-2001 Determination of asbestos in technical products - Infrared spectroscopy method
  • VDI 2460 Blatt 2-1974 Gaseous emission measurement; infrared spectrometric determination of dimethyl formamide

Professional Standard - Commodity Inspection, nickel infrared

  • SN/T 2763.2-2012 Chemical analysis of laterite nickel ore.Part 2:Determination of nickel and cobalt content.Flame atomic absorption spectrometry
  • SN/T 2763.8-2014 Chemical analysis of nickel laterite ore.Part 8:Determination of magnesium oxide content
  • SN/T 3601-2013 Determination of total sulfur in graphite.Infrared absorption spectrometry
  • SN/T 2763.9-2015 Chemical analysis of nickel laterite ores.Part 9:Determination of moisture content of a consignment
  • SN/T 2763.1-2011 Determination of Multiple Components in Lateritic Nickel Ore Part 1: X-ray Fluorescence Spectrometry
  • SN/T 3598-2013 Determination of sulfur content in pyrites ore.High frequency combustion with infrared absorption method
  • SN/T 4363-2015 Determination of Sulfur Content in Copper Concentrates High Frequency Combustion Infrared Absorption Method
  • SN/T 4366-2015 Determination of Sulfur Content in Gold Ore High Frequency Combustion Infrared Absorption Method
  • SN/T 2763.4-2012 Chemical analysis of nickel laterite ore.Part 4:Determination of nickel,cobalt,aluminum,magnesium and phosphorus content.Inductively coupled plasma atomic emission spectrometric method

Standard Association of Australia (SAA), nickel infrared

  • AS/NZS 1050.32:1994 Methods for the analysis of iron and steel - Determination of carbon content - Infrared method
  • AS 3587.5:1998 Ferroalloys - Chemical analysis - Determination of sulfur content - Infrared method
  • AS 3587.4:1998 Ferroalloys - Chemical analysis - Determination of carbon content - Infrared method
  • AS/NZS 1338.3:1992 Filters for eye protectors - Filters for protection against infra-red radiation

Institute of Interconnecting and Packaging Electronic Circuits (IPC), nickel infrared

  • IPC TM-650 2.3.39-2004 Surface Organic Contaminant Identification Test (Infrared Analytical Method) Revision C

National Metrological Technical Specifications of the People's Republic of China, nickel infrared

  • JJF 1107-2003 Calibration Specification for Infrared Thermometers for Measurement of Human Temperature

Professional Standard - Electricity, nickel infrared

  • DL/T 1607-2016 Measurement of sulfur hexafluoride decomposition using infrared spectroscopy method
  • DL/T 568-1995 Fast test methods for ultimate analysis of fuel by infrared absorption & thermal conductivity
  • DL/T 929-2005 Determination of the content in insulating oil and lubricating oil by infrared spectrum method
  • DL/T 929-2018 Determination of structural group composition of mineral insulating oils and lubricating oils by infrared spectroscopy

Professional Standard - Tobacco, nickel infrared

  • YC/T 30-1996 Cigarettes--Determination of carbon monoxide in the gas phase of smoke--NDIR method
  • YC/T 466-2013 Cigars.Determination of carbon monoxide in mainstream smoke of cigars.Non-dispersive infrared method

RU-GOST R, nickel infrared

  • GOST 31871-2012 Motor and aviation gasolines. Determination of benzene by method of infrared spectroscopy
  • GOST R 54896-2012 Vegetable oils. Determination of quality and safety indices by near infrared spectrometry method
  • GOST 12.4.123-1983 Occupational safety standard system. Means of collective protection against infra-red radiation. General technical requirements
  • GOST 28326.3-1989 Technical liquid ammonia. Determination of oil mass concentration by method of infra-red spectrometry
  • GOST 32465-2013 Solid mineral fuel. Determination of sulfur by IR spectrometry
  • GOST R 54039-2010 Soil quality. Quick method for the determination of oil products by NIR spectroscopy
  • GOST R 54039-2010(2019) Soil quality. Quick method for the determination of oil products by NIR spectroscopy

International Commission on Illumination (CIE), nickel infrared

  • CIE 245-2021 Optical Safety of Infrared Eye Trackers Applied for Extended Durations

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., nickel infrared

  • ASHRAE 4643-2003 Evaluation of an Infared Two-Stage Heating System in a Commercial Application
  • ASHRAE AC-02-2-3-2002 Surface Temperatures of Window Specimens: Infrared Thermography Laboratory Measurements
  • ASHRAE SE-99-09-02-1999 Infrared Thermography for Condition Assessment of Buried District Heating Piping
  • ASHRAE SA-96-6-1-1996 Surface Temperatures of Insulated Glazing Units: Infrared Thermography Laboratory Measurements

NO-SN, nickel infrared

  • NS 9803-1993 Water analysis. Determination of oil in water. Infrared spectrophotometric method

Zhejiang Provincial Standard of the People's Republic of China, nickel infrared

  • DB33/T 989-2015 Determination of SBS Content in Modified Asphalt by Infrared Spectroscopy

Universal Oil Products Company (UOP), nickel infrared

  • UOP 703-2009 Carbon on Catalysts by Induction Furnace Combustion and Infrared Detection

中华人民共和国环境保护部, nickel infrared

  • GB 9801-1988 Air quality--Determination of carbon monoxide--Non- disperisive infrared spectrometry

Professional Standard - Petrochemical Industry, nickel infrared

  • SH/T 1727-2004 Butadiene rubber--Determination of microstructure by infra-red spectrometry
  • SH/T 1727-2017 Determination of Microstructure of Butadiene Rubber by Infrared Spectroscopy
  • SH/T 0797-2007 Standard test method for determination of benzene in spark-ignition engine fuels using mid infrared spectroscopy

Professional Standard - Ocean, nickel infrared

  • HY/T 150-2013 Determination of organic carbon in sea water by nondispersive infrared absorption spectrometry
  • HY/T 196-2015 Determination of dissolved inorganic carbon in sea water using non-dispersive infrared absorption

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), nickel infrared

  • AHRI 1330-2014 Performance Rating for Radiant Output of Gas Fired Infrared Heaters

Xinjiang Provincial Standard of the People's Republic of China, nickel infrared

  • DB65/T 4372-2021 Determination of Petroleum in Solid Waste Infrared Spectrophotometry

Qinghai Provincial Standard of the People's Republic of China, nickel infrared

  • DB63/T 2063-2022 Technical Regulations for Wildlife Monitoring Based on Infrared Camera

Professional Standard - Urban Construction, nickel infrared

  • CJ/T 79-1999 Municipal sewage.Determination of total organic carbon.Nondispersive infrared method

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), nickel infrared

  • ASHRAE OR-05-4-1-2005 Laboratory Infrared Thermography Technique for Window Surface Temerature Measurements

PL-PKN, nickel infrared

  • PN BN 6110-06-1964
  • PN-EN 15948-2021-03 E Cereals -- Determination of moisture and protein -- Method using Near-Infrared Spectroscopy in whole kernels
  • PN C04194-1992 Petroleum products Determination of the benzene content in gasoline by infrared spectrophotometric method

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, nickel infrared

  • JEDEC JEP78-1969 Relative Spectral Response Curves for Semiconductor Infrared Detectors

Shandong Provincial Standard of the People's Republic of China, nickel infrared

  • DB37/T 2651-2015 Determination of Methylal Content in Motor Gasoline by Infrared Spectroscopy

农业农村部, nickel infrared

  • NY/T 3297-2018 Determination of total phenols and tocopherols in rapeseed by near-infrared spectroscopy
  • NY/T 3298-2018 Determination of crude protein in vegetable oils by near-infrared spectroscopy
  • NY/T 3299-2018 Determination of oleic acid and linoleic acid in vegetable oils by near-infrared spectroscopy

(U.S.) Telecommunications Industries Association , nickel infrared

  • TIA-455-106-1992 FOTP 106 Procedures for Determining Threshold Current of Semiconductor Lasers

NL-NEN, nickel infrared

  • NEN 6127-1984 Safety of household and similar electrical appliances - Particular requirements for ultra-violet and infrared radiatioa skin treatment appliances

Professional Standard - Chemical Industry, nickel infrared

  • HG/T 5077-2016 Optical functional films.Measuring method of the near infrared spectral transmittance

Tianjin Provincial Standard of the People's Republic of China, nickel infrared

  • DB12/T 955-2020 Determination of Nitrogen and Phosphorus in Dairy Farm Dung Water by Near Infrared Diffuse Reflectance Spectrometry

Anhui Provincial Standard of the People's Republic of China, nickel infrared

  • DB34/T 2561-2015 Near-infrared method for rapid determination of routine indicators of solid-state fermented grains
  • DB34/T 3561-2019 Near-infrared method for rapid determination of conventional indicators of brewing raw materials

Jiangsu Provincial Standard of the People's Republic of China, nickel infrared

  • DB32/T 4379-2022 Determination of Fourier Transform Infrared Spectrum of Graphene Oxide Material

海关总署, nickel infrared

  • SN/T 5347.1-2021 Determination of carbon and sulfur content in chromium ore by high frequency infrared absorption method
  • SN/T 5250-2020 Determination of sulfur content in mineral products by high-frequency combustion infrared absorption method

电子工业部, nickel infrared

  • SJ/T 10688-1996 Technical requirements and test methods for infrared remote control systems of air conditioners

Society of Automotive Engineers (SAE), nickel infrared

  • SAE AS6165-2012 Interface Standard, Airborne EO/IR Systems, Maintenance and Test

RO-ASRO, nickel infrared

  • STAS SR ISO 6781:1995 Thermal insulation - Qualitative detection of thermal irregularities in building envelopes - Infrared method

Professional Standard - Public Safety Standards, nickel infrared

  • GA/T 823.2-2009 Analysis method for paint fragment.Part 2:Infrared absorption spectrometry

Professional Standard - Customs, nickel infrared

  • HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer

Henan Provincial Standard of the People's Republic of China, nickel infrared

  • DB41/T 1569-2018 Determination of Fixed Carbon Content in Graphite Ore High Frequency Combustion Infrared Absorption Method

Professional Standard - Agriculture, nickel infrared

  • GB 8570.6-1988 Determination of the content of liquid anhydrous ammonia oil by gravimetric and infrared spectroscopic methods

Jilin Provincial Standard of the People's Republic of China, nickel infrared

  • DB22/T 1812-2013 Non-destructive and rapid determination of ginseng polysaccharides in ginseng by near-infrared spectroscopy

国家能源局, nickel infrared

  • NB/T 10764-2021 Determination of ash content of lignocellulosic biomass raw materials using near-infrared method
  • NB/T 10766-2021 Determination of moisture content of lignocellulosic biomass raw materials using near-infrared method
  • NB/T 10765-2021 Determination of calorific value of lignocellulosic biomass raw materials using near-infrared method
  • NB/SH/T 0802-2019 Determination of 2,6-di-tert-butyl-p-cresol in insulating oil by infrared spectroscopy

Electronic Components, Assemblies and Materials Association, nickel infrared

  • ECA EIA-448-21A-2000 Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using an Infrared System

Professional Standard - Nuclear Industry, nickel infrared

  • EJ/T 1164-2002 Determination of sulfur content in uranium dioxide powder - Infrared absorption method after combustion in an induction furnace

US-FCR, nickel infrared

Liaoning Provincial Standard of the People's Republic of China, nickel infrared

  • DB21/T 2751-2017 Determination of Microplastics in Seawater by Fourier Transform Microscopy Infrared Spectroscopy




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved