ZH
RU
ES
How to test coating insulation
How to test coating insulation, Total:86 items.
In the international standard classification, How to test coating insulation involves: Testing of metals, Non-ferrous metals, Electrical and electronic testing, Insulating materials, Electrical wires and cables, Nuclear energy engineering, Construction materials, Glass, Electronic components in general, Protection of and in buildings, Surface treatment and coating, Elements of buildings, Reinforced plastics, Electricity. Magnetism. Electrical and magnetic measurements, Insulating fluids, Thermodynamics and temperature measurements, Air quality, Linear and angular measurements.
Professional Standard - Aerospace, How to test coating insulation
- QJ 2220.1-1992 General principles of test methods for electrical insulation properties of coatings
- QJ 2220.2-1992 Test methods for electrical insulation properties of coatings Test methods for insulation resistance, surface resistivity, and volume resistivity
- QJ 2220.4-1994 Test method for coating electrical insulation performance Test method for relative dielectric constant at power frequency, audio frequency and high frequency
- QJ 2220.5-1994 Test method for coating electrical insulation performance Test method for dielectric loss tangent at power frequency, audio frequency and high frequency
- QJ 2220.3-1992 Coating electrical insulation performance test method Measurement method of breakdown voltage, breakdown strength and withstand voltage under power frequency
- QJ 483-1990 Test method for breakdown voltage of aluminum and aluminum alloy insulating anodized film layer
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to test coating insulation
- GB/T 20831-2007 Methods of assessment of temperature capability of inter laminar insulation coatings of electrical sheet and strip
- GB/T 2522-2007 Methods of test for the determination of surface insulation resistance and lamination factor of electric sheet and strip
US-ACEI, How to test coating insulation
工业和信息化部, How to test coating insulation
- YS/T 1309-2019 Testing method for insulation properties of titanium and titanium alloy coatings
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to test coating insulation
- GB/T 2522-2017 Methods of test for the determination of coating insulation resistance and coating adhesion of electrical strip and sheet
German Institute for Standardization, How to test coating insulation
- DIN 46453-3:1977-05 Winding wires, round wires insulated, single or multiple insulated by covering; methods of tests
- DIN EN IEC 60404-12:2021-07 Magnetic materials - Part 12: Methods of test for the assessment of thermal endurance of surface insulation coatings on electrical steel strip and sheet (IEC 68/679/CD:2021); Text in German and English / Note: Date of issue 2021-06-11*Intended as repla...
Korean Agency for Technology and Standards (KATS), How to test coating insulation
- KS D 8514-1998(2018) Test methods for dielectric strength of anodic oxidation coatings on aluminium and aluminium alloys
- KS C IEC 60455-2-2:2019 Specification for solventless polymerisable resinous compounds used for electrical insulation — Part 2-2: Methods of test —Test methods for coating powders for electrical purposes
American National Standards Institute （ANSI), How to test coating insulation
- ANSI/ASTM A937/A 937M:2001 Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
- ANSI/ASTM D1389:2007 Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
- ANSI/ASTM D1458:2013 Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
American Society for Testing and Materials (ASTM), How to test coating insulation
- ASTM D7895/D7895M-14(2018) Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems
- ASTM D7895/D7895M-19 Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems
- ASTM A937/A937M-01 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
- ASTM A937/A937M-12(2019) Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
- ASTM D349-99 Standard Test Methods for Laminated Round Rods Used for Electrical Insulation
- ASTM D7894/D7894M-14(2018) Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems
- ASTM E2134-01(2006) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
- ASTM E2134-01 Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
- ASTM D7894/D7894M-19 Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems
- ASTM E2141-12 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
- ASTM A937/A937M-12 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
- ASTM A937/A937M-06 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
- ASTM E2485-06 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
- ASTM E2485/E2485M-13(2018) Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
- ASTM E2485/E2485M-13 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
- ASTM D1458-96 Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
- ASTM D1458-01(2007) Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
- ASTM D1458-01 Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
- ASTM D1458-13 Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
- ASTM E2141-06 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
- ASTM E2570-07 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
- ASTM E235-88(1996)e1 Standard Specification for Thermocouples, Sheathed, Type K, for Nuclear or for Other High-Reliability Applications
- ASTM E2359/E2359M-13(2018) Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
- ASTM E2273-03(2011) Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
- ASTM D8142-23 Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
- ASTM B244-09(2021) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM B244-09(2014) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM D8142-17 Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
- ASTM D8142-17e1 Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
- ASTM B244-97 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM B244-97(2002) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM E2570/E2570M-07(2014)e1 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
- ASTM E970-07 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
- ASTM E2570/E2570M-07(2019) Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
- ASTM E2273-18 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
- ASTM E2098-00 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
- ASTM E2098-00(2006) Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
CZ-CSN, How to test coating insulation
- CSN 34 6510-1984 Clad laminated insulating materials for printed circuits. Testing methods
Anhui Provincial Standard of the People's Republic of China, How to test coating insulation
- DB34/T 3571-2019 Electrical test method for insulating layer of large superconducting magnet
RU-GOST R, How to test coating insulation
- GOST R EN 12039-2008 Roofing, hydraulic-insulating, flexible, bitumen-based materials. Method for determination of granules to coating layer adhesion
- GOST EN 12039-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of granules to coating layer adhesion
- GOST R 56773-2015 Composites. Method of accelerated ageining tests of absorptive electrochromic coatings on sealed insulating glass units
IN-BIS, How to test coating insulation
FI-SFS, How to test coating insulation
AENOR, How to test coating insulation
- UNE 21340-2-2:1992 SPECIFICATION FOR SOLVENTLESS POLYMERISABLE RESINOUS COMPOUNDS USED FOR ELECTRICAL INSULATION. METHODS OF TEST. TEST METHODS FOR COATING POWERS FOR ELECTRICAL PURPOSES.
ES-UNE, How to test coating insulation
- UNE-EN IEC 60404-12:2023 Magnetic materials - Part 12: Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet (Endorsed by Asociación Española de Normalización in May of 2023.)
Professional Standard - Electron, How to test coating insulation
- SJ 1285-1977 Test methods for electric insulating property of aluminium alloy anodizing
ZA-SANS, How to test coating insulation
- SANS 6282-2:2007 Test methods for bare conductors and conductors of insulated electric cables Part 2: Quality of metallic coatings
European Committee for Standardization (CEN), How to test coating insulation
- HD 307.2.2 S1-1986 Specification for solventless polymerisable resinous compounds used for electrical insulation; part 2: methods of test; test methods for coating powders for electrical purposes
Association Francaise de Normalisation, How to test coating insulation
- NF P30-317:2006 Travaux de couverture et de bardage - Éléments de fixation - Revêtements d'étanchéité et isolants-supports fixés mécaniquement - Méthode d'essai conventionnelle de la caractéristique "solide au pas" des fixations
- NF EN IEC 60404-12:2023 Matériaux magnétiques - Partie 12 : méthodes d'essai pour l'évaluation de l'endurance thermique des revêtements isolants superficiels des bandes et tôles en acier électrique
- NF P30-313:2004 Travaux de couverture - Détermination de la résistance caractéristique d'assemblage - Méthode d'essai d'arrachement des fixations de l'isolant ou du revêtement d'étanchéité sur l'élément porteur
- XP P 30-313-1997 ROOFING. FASTENERS. DETERMINATION OF THE CHARACTERISTIC RESISTANCE OF THE ASSEMBLY. TEST METHOD TO DETERMINE THE PULL-OUT LOAD OF FIXINGS OUT OF INSULATING MATERIAL OR SEALING COATING FROM THE FRAME.
- NF C26-935:1965 Méthodes d'essai des vernis isolants - Vernis d'imprégnation en couche épaisse - Évaluation des caractéristiques d'état liées au traitement thermique.
- NF EN 60893-2:2004 Matériaux isolants - Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques - Partie 2 : méthodes d'essai
- NF EN 3475-701:2017 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 701 : dénudabilité et adhérence de l'isolation sur le conducteur
British Standards Institution (BSI), How to test coating insulation
- BS 5664-2.2:1988 Solventless polymerisable resinous compounds used for electrical insulation. Methods of test.. Coating powders
- BS EN IEC 60404-12:2023 Tracked Changes. Magnetic materials. Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet
- 21/30433681 DC BS EN IEC 60404-12. Magnetic materials. Part 12. Methods of test for the assessment of thermal endurance of surface insulation coatings on electrical steel strip and sheet
- 20/30403965 DC BS EN IEC 60404-12. Magnetic materials. Part 12. Methods of test for the assessment of thermal endurance of surface insulation coatings on electrical steel strip and sheet
European Committee for Electrotechnical Standardization（CENELEC）, How to test coating insulation
- EN IEC 60404-12:2023 Magnetic materials - Part 12: Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet
- HD 307.2.2 S1-1989 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 2: Methods of Test. Test Methods for Coating Powders for Electrical Purposes
International Electrotechnical Commission (IEC), How to test coating insulation
- IEC 60404-12:2023 Magnetic materials - Part 12: Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet
RO-ASRO, How to test coating insulation
- STAS SR CEI 455-2-2-1995 Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 2: Methods of test. Test methods for coating powders for electrical purposes
- STAS 5162/8-1974 CABLES WITH THERMOPLASTIC MATERIAL, ELASTOMERE AND NATURAL RUBBER INSULATION AND SHEATH Methods for testing the resistance to chemical agents
KR-KS, How to test coating insulation
- KS C IEC 60455-2-2-2019 Specification for solventless polymerisable resinous compounds used for electrical insulation — Part 2-2: Methods of test —Test methods for coating powders for electrical purposes