ZH
RU
ES

pb+

pb+, Total:249 items.

In the international standard classification, pb+ involves: Pipeline components and pipelines, Rubber and plastics products, Installations in buildings, Non-ferrous metals, Raw materials for rubber and plastics, Rotating machinery, Elements of buildings, Analytical chemistry, Air quality, Shipbuilding and marine structures in general, Inorganic chemicals, Construction materials, Protective equipment, Applications of information technology, Water quality, Test conditions and procedures in general, Materials and articles in contact with foodstuffs, Plastics, General methods of tests and analysis for food products.

German Institute for Standardization, pb+

DIN 16969:1997 Pipes made of polybutene (PB) - PB 125 - Dimensions
DIN 16969:2012-11 Pipes made of polybutene-1 (PB-1) - PB 125 - Dimensions; Text in German and English
DIN 16969:2012 Pipes made of polybutene-1 (PB-1) - PB 125 - Dimensions; Text in German and English
DIN 16968:2012-11 Pipes made of Polybutene-1 (PB-1) - PB 125 - General quality requirements and testing; Text in German and English
DIN 16968:2012 Pipes made of Polybutene-1 (PB-1) - PB 125 - General quality requirements and testing; Text in German and English
DIN 16968:1996 Polybutene pipes (PB) - General quality requirements and testing
DIN 16831-5:1999-10 Pipe joints and components of polybutene (PB) for pipes under pressure; PB 125 - Part 5: General quality requirements, testing
DIN EN ISO 15876-2:2004 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes (ISO 15876-2:2003); German version EN ISO 15876-2:2003
DIN EN ISO 15876-1:2004 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO 15876-1:2003); German version EN ISO 15876-1:2003
DIN EN ISO 15876-3:2004 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings (ISO 15876-3:2003); German version EN ISO 15876-3:2003
DIN EN 14605:2005 Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]); German version E
DIN EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V; German version EN 14385:2004
DIN ISO/TS 15876-7:2004 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2003); German version CEN ISO/TS 15876-7:2003
DIN EN ISO 15876-2/A1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2003/Amd 1:2007); English version of DIN EN ISO 15876-2:2003/A1:2007-09
DIN EN ISO 15876-1:2017-06 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017); German and English version EN ISO 15876-1:2017 / Note: This standard is part of the DVGW body of rules.
DIN EN ISO 15876-2:2021-03 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017 + Amd 1:2020); German and English version EN ISO 15876-2:2017 + A1:2020 / Note: This standard is part of the DVGW body of rules.
DIN EN ISO 15876-5:2004 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003); German version EN ISO 15876-5:2003
DIN EN 16057:2012-07 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method; German version EN 16057:2012

Japanese Industrial Standards Committee (JISC), pb+

JIS K 6778:1999 Polybutene (PB) pipes
JIS K 6778:2004 Polybutene (PB) pipes
JIS K 6778:2016 Polybutene (PB) pipes
JIS K 6779:1999 Polybutene (PB) pipe fittings
JIS K 6779:2004 Polybutene (PB) pipe fittings
JIS K 6779:2016 Polybutene (PB) pipe fittings
JIS K 6792:2004 Polybutene (PB) pipes for water supply
JIS K 6778 AMD 1:2009 Polybutene (PB) pipes (Amendment 1)
JIS K 6793:1997 Polybutene (PB) pipe fittings for water works
JIS K 6793:2004 Polybutene (PB) pipe fittings for water supply
JIS K 6779 AMD 1:2009 Polybutene (PB) pipe fittings (Amendment 1)
JIS K 6779 AMD 3:2011 Polybutene (PB) pipe fittings (Amendment 3)
JIS K 6793:1999 Polybutene (PB) pipe fittings for water works
JIS K 6792 AMD 1:2009 Polybutene (PB) pipes for water supply (Amendment 1)
JIS K 6779 AMD 2:2010 Polybutene (PB) pipe fittings (Amendment 2)
JIS K 6793 AMD 1:2009 Polybutene (PB) pipe fittings for water supply (Amendment 1)
JIS K 6793 AMD 3:2011 Polybutene (PB) pipe fittings for water supply (Amendment 3)

未注明发布机构, pb+

PL-PKN, pb+

PN BN 6114-46-1967

IPC - Association Connecting Electronics Industries, pb+

IPC/JEDEC J-STD-609A CHINESE-2010
IPC/JEDEC J-STD-609A CHINESE CD-2010 Marking and Labeling of Components@ PCBs and PCBAs to Identify Lead (Pb)@ Lead-Free (Pb-Free) and Other Attributes
IPC/JEDEC J-STD-609A.01 ERTA-2011 Marking and Labeling of Components@ PCBs and PCBAs to Identify Lead (Pb)@ Lead-Free (Pb-Free) and Other Attributes
IPC/JEDEC J-STD-609A.01-2011 Marking and Labeling of Components@ PCBs and PCBAs to Identify Lead (Pb)@ Lead-Free (Pb-Free) and Other Attributes
IPC/JEDEC J-STD-609A-2010 Marking and Labeling of Components@ PCBs and PCBAs to Identify Lead (Pb)@ Lead-Free (Pb-Free) and Other Attributes
IPC/JEDEC J-STD-609A CD-2010 Marking and Labeling of Components@ PCBs and PCBAs to Identify Lead (Pb)@ Lead-Free (Pb-Free) and Other Attributes
IPC TM-650 2.5.5.12-2009 Test Methods to Determine the Amount of Signal Loss on Printed Boards (PBs)
IPC/JEDEC J-STD-609-2007 Marking and Labeling of Components@ PCBs and PCBAs to Identify Lead (Pb)@ Pb-Free and Other Attributes

IETF - Internet Engineering Task Force, pb+

RFC 5793-2010 PB-TNC: A Posture Broker (PB) Protocol Compatible with Trusted Network Connect (TNC)

AENOR, pb+

UNE 37224:1983 PB-SB ACCUMULATOR ALLOYS.
UNE-EN 14605:2005+A1:2009 Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
UNE-EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
UNE-EN 14902:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
UNE-EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
UNE-EN ISO 15876-1:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017)

Standard Association of Australia （SAA）, pb+

AS/NZS 2642.1:2007 Polybutylene (PB) plumbing pipe systems - Polybutylene (PB) pipe extrusion compounds
AS/NZS 2642.3:2008 Polybutylene (PB) plumbing pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
AS 5082.1:2007 Polybutylene (PB) plumbing pipe systems - Metric series - Metric polybutylene (PB) pipes for hot and cold water applications
AS/NZS 2642.1:1994 Polybutylene pipe systems - Polybutylene (PB) pipe extrusion compounds
AS 5082.2:2007 Polybutylene (PB) plumbing pipe systems - Metric series - Mechanical and fusion jointing systems

CZ-CSN, pb+

CSN 05 5622-1975 Soft solder B-Sn50 Pb-215/185
CSN 05 5626-1975 Soft solder B-Sn90 Pb-220/185
CSN 05 5624-1975 Soft solder B-Sn60 Pb-190/185
CSN ON 85 5105-1962

BR-ABNT, pb+

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, pb+

JEDEC J-STD-609A.01-2011 Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-Free) and Other Attributes
JEDEC JESD97-2004 Marking, Symbols, and Labels for Identification of Lead (Pb) Free Assemblies, Components, and Devices

International Organization for Standardization (ISO), pb+

ISO 2779:1973 Aluminium machining alloys — Chemical composition and mechanical properties of alloys Al-Cu6 Bi Pb and Al-Cu4 Pb Mg
ISO 12230:1996 Polybutene (PB) pipes - Effect of time and temperature on the expected strength
ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
ISO 15876-2:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes
ISO 15876-1:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General
ISO 15876-2:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes
ISO 15876-3:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings
ISO 15876-1:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General
ISO 15876-3:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings
ISO 15876-2:2003/Amd 1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes; Amendment 1
ISO 15876-3:2017/Amd 2:2021 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings — Amendment 2
ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity
ISO 15876-1:2003/Amd 1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General; Amendment 1
ISO 15876-5:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system
ISO 15876-2:2017/Amd 1:2020 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes — Amendment 1
ISO 15876-3:2017/Amd 1:2020 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings — Amendment 1

NZ-SNZ, pb+

AS/NZS 2642.2:2008 Polybutylene (PB) plumbing pipe systems Part 2: Polybutylene (PB) pipe for hot and cold water applications

British Standards Institution (BSI), pb+

12/30262664 DC BS EN 62588. Marking and Labeling of Components, PCBs and PCBAs to identify lead (Pb), lead-free (Pb-free) and other attributes
BS ISO 12230:2012 Polybutene-1 (PB-1) pipes. Effect of time and temperature on the expected strength
BS DD CEN ISO/TS 15876-7:2006 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Guidance for the assessment of conformity
BS EN ISO 15876-2:2017+A1:2020 Plastics piping systems for hot and cold water installations. Polybutene (PB) - Pipes
BS EN ISO 15876-3:2017+A2:2021 Plastics piping systems for hot and cold water installations. Polybutene (PB) - Fittings
BS EN 14605:2005+A1:2009 Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
BS EN 14605:2005 Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (type 3) or spray-tight (type 4) connections, including items providing protection to parts of the body only (types PB [3] and PB [4])
BS EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
BS EN 14385:2004(2008) Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
BS EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Preparation of test specimens and determination of properties
DD IEC/PAS 62588:2008 Marking and labeling of components, PCBs and PCBAs to identify lead(Pb), Pb-free and other attributes
BS EN 16057:2012 Influence of metallic materials on water intended for human consumption. Determination of residual surface lead (Pb). Extraction method
BS EN ISO 8986-1:1995 Plastics - Polybutene (PB) moulding and extrusion materials - Designation system and basis for specifications
BS EN ISO 15876-5:2017+A1:2020 Plastics piping systems for hot and cold water installations. Polybutene (PB) - Fitness for purpose of the system

American Society for Testing and Materials (ASTM), pb+

ASTM F1380-95a Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing
ASTM F1380-95a(2002)e1 Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing
ASTM E2568-09e1 Standard Specification for PB Exterior Insulation and Finish Systems
ASTM F1380-95a(2002) Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing
ASTM E2568-07 Standard Specification for PB Exterior Insulation and Finish Systems
ASTM E2568-17 Standard Specification for PB Exterior Insulation and Finish Systems
ASTM E2568-17a Standard Specification for PB Exterior Insulation and Finish Systems
ASTM D2581-96 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials
ASTM D2581-01 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials
ASTM D2581-02 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials
ASTM F878-95 Specification for Polybutylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing (Withdrawn 2000)
ASTM C1397-05 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
ASTM C1397-04 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
ASTM D330-07(2021) Standard Specification for 2-Butoxyethanol
ASTM D3309-92 Standard Specification for Polybutylene (PB) Plastic Hot-and Cold-Water Distribution Systems
ASTM D3309-92a Standard Specification for Polybutylene (PB) Plastic Hot-and Cold-Water Distribution Systems
ASTM D3309-96a(2002) Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
ASTM D3309-96a Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
ASTM D2581-09 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials
ASTM C1397-03 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
ASTM C1397-02 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
ASTM C1397-09 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
ASTM C1397-98 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
ASTM F845-96 Standard Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003)
ASTM E2486-06 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
ASTM E2486/E2486M-22 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
ASTM E2486/E2486M-13 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
ASTM C1397-13(2019) Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage

National Metrological Verification Regulations of the People's Republic of China, pb+

JJG 503-1987 Verification Regulation of Model PB-2 Decimal Frequency Meter

American Society of Mechanical Engineers (ASME), pb+

ASME SEC I PT PB-2001 Part PB Requirements for Boilers Fabricated by Brazing

RO-ASRO, pb+

STAS 2721-1986 BI.OCK (1KEASES FOH OPEN liKARINT, SOKKASE \A) 18i! I.i-Ca l'b 7 C,

SAE - SAE International, pb+

SAE AMS4820C-1980 BEARINGS@ LEADED COPPER 70.5 Cu - 28.5 Pb - 1.1 Ag Steel Back

YU-JUS, pb+

JUS H.B8.209-1984 Acetic acid for industrial use. Determianiton of heavy meta/s content (as Pb). Colorimetric method
JUS H.B8.351-1982 Boric acid for industrial use. Determination of heavy meta/s content (as Pb). Colorimetric method
JUS H.G8.397-1989 Reagents. Nitric acid. Determination of heavy metals content (as Pb). Colorimetric method

IT-UNI, pb+

UNI 5707-1965
UNI 5705-1965 Leghe di rame da lavorazione plastica Ottone al piombo con Cu 58% Zn 40% Pb 2% Sostituisce parzialmente UNI 2012
UNI 5706-1965
UNI 7279-1974
UNI 6362-1968
UNI EN ISO 15876-3:2021 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings
UNI EN ISO 15876-2:2021 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes

Professional Standard - Machinery, pb+

JB/T 6217-2005 Technical specification for PB-series flameproof canned motors
JB 6217-1992 Technical conditions of PB series flameproof shielded motors

(U.S.) Ford Automotive Standards, pb+

FORD WSS-M11A32-A3-2012 SOLDER PASTE, 10 SN/88 PB/2 AG ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M11A12-A-2012 SOLDER, 5 Sn/95 Pb ALLOYING PIG ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M11A24-A-2005 SOLDER, PASTE (50 SN/50 PB) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSF-M11A43-A-2012 SOLDER PASTE, 62 SN, 36 Pb, 2 Ag ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M11A47-A1-2005 SOLDER PASTE, 62 SN/36 PB/2 AG, LOW VISCOSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M11A12-A-2005 SOLDER, 5 SN/95 PB, ALLOYING PIG ***TO BE USED WITH FORD WSS-M99P1111-A***

Association Francaise de Normalisation, pb+

NF EN ISO 15876-3:2017 Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 3 : Raccords
NF EN ISO 15876-2:2017 Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 2 : Tubes
NF EN ISO 15876-1:2017 Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 1 : généralités
NF EN ISO 15876-2/A1:2020 Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 2 : tubes - Amendement 1
NF EN ISO 15876-3/A2:2021 Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 3 : raccords - Amendement 2
NF S74-564/IN1*NF EN 14605/IN1:2009 Protective clothing for use against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB (3) and PB (4)).
NF T54-944-1:2004 Plastics piping systems for hot and water installations - Polybutylene (PB) - Part 1 : general.
NF T54-944-2:2004 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2 : pipes.
NF T54-944-3:2004 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3 : fittings.
NF T54-944-3*NF EN ISO 15876-3:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3 : Fittings
NF T54-944-1*NF EN ISO 15876-1:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1 : General
NF X43-307*NF EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
NF EN ISO 15876-5/A1:2020 Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 5 : aptitude à l'emploi du système - Amendement 1
NF EN 14385:2004 Émissions de sources fixes - Détermination de l'émission totale de As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI et V
NF S74-564*NF EN 14605+A1:2009 Protective clothing for use against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB (3) and PB (4))
NF T54-944-2/A1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2 : pipes - Amendment 1.
NF P41-041*NF EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
NF T54-944-5*NF EN ISO 15876-5:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5 : Fitness for purpose of the system
NF T54-944-5:2004 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5 : fitness for purpose of the system.
NF T54-944-1/A1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1 : general - Amendment 1.
NF T54-944-2*NF EN ISO 15876-2:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2 : Pipes
NF T54-944-2/A1:2020 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2 : pipes - Amendment 1
NF T54-944-3/A2*NF EN ISO 15876-3/A2:2021 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3 : fittings - Amendment 2
NF EN 16057:2012 Influence des matériaux métalliques sur l'eau destinée à la consommation humaine - Dosage du plomb (Pb) résiduel de surface - Méthode d'extraction

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, pb+

GB/T 10304.11-1988 Determination of heavy metals in cathode carbonate
GB/T 19473.2-2004 Polybutylene(PB) piping systems for hot and cold water installations-Part 2:Pipes
GB/T 19473.1-2004 Polybutylene(PB) piping systems for hot and cold water installations-Part 1:General
GB/T 19473.3-2004 Polybutylene(PB) piping systems for hot and cold water installations-Part 3:Fittings

Korean Agency for Technology and Standards (KATS), pb+

KS D 2008-2007(2017) Methods for chemical analysis of Pb-free solder(Tin alloys)
KS M 1064-2005 Determination of lead(Pb) and cadmium(Cd) in metals byICP－AES/MS and AAS
KS M ISO 15876-2:2013 Plastics piping systems for hot and cold water installations ㅡ Polybutylene (PB) ㅡ Part 2: Pipes
KS M 3363-2015(2020) Plastics piping systems for hot and cold water installations — Polybutylene (PB) pipes
KS M ISO 15876-1:2008 Plastics piping systems for hot and cold water installations－Polybutylene(PB)－Part 1：General
KS M ISO 15876-3:2013 Plastics piping systems for hot and cold water installations－Polybutylene(PB)－Part 3：Fittings
KS M ISO 15876-3:2018 Plastics piping systems for hot and cold water installations — Polybutene(PB) — Part 3: Fittings
KS M ISO 15876-2-2016(2021) Plastics piping systems for hot and cold water installations ㅡ Polybutylene (PB) ㅡ Part 2: Pipes
KS M ISO 15876-1:2018 Plastics piping systems for hot and cold water installations — Polybutene(PB) — Part 1: General
KS M ISO 15876-5:2013 Plastics piping systems for hot and cold water installations-Polybutylene(PB)-Part 5:Fitness for purpose of the system
KS M 3532-1-1998
KS M ISO 8986-1-2013(2018) PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS

Indonesia Standards, pb+

SNI 7248-2009
SNI 06-6989.45-2005 Water and waste water - Part 45: Test methods of lead (Pb) content with atomic absorption spectrophotometers (AAS) by extraction
SNI 2354.5-2011 Chemical test methods - Part 5: Determination of heavy metal lead (Pb) and cadmium (Cd) in fishery products

TH-TISI, pb+

TIS 910-1989(en) POLYBUTYLENE (PB) PRESSURE PIPE AND TUBING FOR DRINKING WATER SERVICES
TIS 910-1989 Standard for polybutylene (pb) pressure pipe and tubing for drinking water services

工业和信息化部/国家能源局, pb+

JB/T 6217-2016 PB series flameproof shielded motor (with pump) technical conditions

国家市场监督管理总局、中国国家标准化管理委员会, pb+

GB/T 19473.2-2020 Polybutene (PB) piping systems for hot and cold water installations—Part 2: Pipes
GB/T 19473.3-2020 Polybutene (PB) piping systems for hot and cold water installations—Part 3: Fittings
GB/T 19473.1-2020 Polybutene (PB) piping systems for hot and cold water installations—Part 1: General
GB/T 19473.5-2020 Polybutene (PB) piping systems for hot and cold water installations—Part 5: Fitness for purpose of the system
GB/T 37199.2-2018 Plastics—Polybutene(PB) moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties
GB/T 37199.1-2021 Plastics—Polybutene(PB) moulding and extrusion materials—Part 1：Designation system and basis for specifications

PT-IPQ, pb+

NP 1210-1976

Professional Standard-Ships, pb+

CB 1298-1998 Technical requirements and inspection methods for Pb-Sn-Cu alloy antifriction coating

Professional Standard - Electron, pb+

SJ/T 10929-1996 Methods for determination of heavy metals (Pb) in potassium silicate solution for use in electronic industry

(U.S.) Plastic Pipe Association, pb+

PPI TN-31-2004 Differences Between PEX and PB Piping Systems for Potable Water Applications

Qinghai Provincial Standard of the People's Republic of China, pb+

DB63/T 1298-2014 Determination of Pb Content in Salt Lake Boric Acid Products by Atomic Absorption Spectrometry

ES-AENOR, pb+

Danish Standards Foundation, pb+

DS/ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
DS/EN ISO 15876-3:2004 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings
DS/EN 14605+A1:2009 Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
DS/EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
DS/EN 14902/AC:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
DS/EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
DS/EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
DS/EN ISO 15876-1/A1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General
DS/EN ISO 15876-1:2004 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General
DS/EN ISO 15876-2/A1:2007 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes
DS/EN ISO 15876-2:2004 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes
DS/CEN ISO/TS 15876-7:2004 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity

European Committee for Standardization (CEN), pb+

EN ISO 15876-1:2017 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General
EN ISO 15876-2:2017 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes
EN ISO 15876-3:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings
EN 15876-2:2016 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite
EN 14605:2005 Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) (Incorporates Ame
EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, TI and V
EN ISO 15876-2:2017/A1:2020 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
prEN 14385 rev Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
EN ISO 15876-5:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system
EN ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment ofconformity
EN 15876-2:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite
EN ISO 15876-3:2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings ISO 15876-3:2003

ZA-SANS, pb+

SANS 15876-1:2005 Plastics piping systems for hot and cold water installations - Polybutylene (PB) Part 1: General
SANS 15876-2:2005 Plastics piping systems for hot and cold water installations - Polybutylene (PB) Part 2: Pipes
SANS 15876-3:2005 Plastics piping systems for hot and cold water installations - Polybutylene (PB) Part 3: Fittings

VDI - Verein Deutscher Ingenieure, pb+

VDI 2268 Blatt 1-1984 Determination of suspended particulates; determination of Ba@ Be@ Cd@ Co@ Cr@ Cu@ Ni@ Pb@ Sr@ V@ Zn in dust emissions by atomic spectrometric methods

Underwriters Laboratories (UL), pb+

UL SUBJECT 116875-2010 OUTLINE OF INVESTIGATION FOR LEAD (Pb) CONTENT VERIFICATION OF PRODUCTS IN CONTACT WITH POTABLE WATER (Issue 1)

KR-KS, pb+

KS M ISO 15876-3-2018 Plastics piping systems for hot and cold water installations — Polybutene(PB) — Part 3: Fittings
KS M ISO 15876-1-2018 Plastics piping systems for hot and cold water installations — Polybutene(PB) — Part 1: General

Lithuanian Standards Office , pb+

LST EN 14605-2005+A1-2009 Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
LST EN 16057-2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
LST EN 14902-2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
LST EN 14902-2005/AC-2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
LST EN 14385-2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V

Canadian General Standards Board （CGSB), pb+

CGSB 1.500-75 METH 1-CAN2-1973 Methods of Test for Toxic Trace Elements in Protective Coatings Determination of Lead (Pb) in Low Concentration

IEC - International Electrotechnical Commission, pb+

PAS 62588-2008 Marking and labeling of components@ PCBs and PCBAs to identify lead(Pb)@ Pb-free and other attributes (Edition 1.0)

AT-ON, pb+

OENORM EN ISO 15876-1:2021 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017)