ZH

RU

ES

Oxygen standard gas concentration

Oxygen standard gas concentration, Total:352 items.

In the international standard classification, Oxygen standard gas concentration involves: Fuels, Thermodynamics and temperature measurements, Protection against fire, Air quality, Explosion protection, Geology. Meteorology. Hydrology, Analytical chemistry, Inorganic chemicals, Protection against dangerous goods, Environmental protection, Alarm and warning systems, Organic chemicals, Linear and angular measurements, Vocabularies, CHEMICAL TECHNOLOGY, Glass, Cargo equipment, Plastics, Burners. Boilers, Equipment for the chemical industry, Metrology and measurement in general, Nuclear energy engineering, Valves, Power stations in general, Occupational safety. Industrial hygiene, Pipeline components and pipelines, Water quality, Products of the chemical industry, Protective equipment, Components for electrical equipment, Natural gas, Environmental testing, Wastes, Ceramics, Crude petroleum.


American Society for Testing and Materials (ASTM), Oxygen standard gas concentration

  • ASTM E2079-01 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
  • ASTM E2079-00 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
  • ASTM E2079-19 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
  • ASTM E207-08(2015) Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
  • ASTM E207-08(2015)e1 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
  • ASTM E2079-07 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
  • ASTM E2079-07(2013) Standard Test Methods for Limiting Oxygen 40;Oxidant41; Concentration in Gases and Vapors
  • ASTM D4490-96 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
  • ASTM E681-04 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
  • ASTM D4490-23 Red Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors (Standard + Redline PDF Bundle)
  • ASTM D4490-96(2001)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
  • ASTM E681-09(2023) Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
  • ASTM E681-09(2015) Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
  • ASTM D4490-23 Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors
  • ASTM D4490-96(2016) Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
  • ASTM D4490-96(2011) Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
  • ASTM D4490-96(2006)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
  • ASTM D4599-03 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • ASTM D4599-97 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • ASTM D459-08 Standard Terminology Relating to Soaps and Other Detergents
  • ASTM D459-08a Standard Terminology Relating to Soaps and Other Detergents
  • ASTM D4599-14 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • ASTM D4599-03(2009)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • ASTM D4599-20 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • ASTM D4599-21 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • ASTM E2323-04 Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer
  • ASTM E544-99 Standard Practices for Referencing Suprathreshold Odor Intensity
  • ASTM E544-99(2004) Standard Practices for Referencing Suprathreshold Odor Intensity
  • ASTM D5149-95 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
  • ASTM D5149-02 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
  • ASTM D5149-02(2016) Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
  • ASTM D5149-02(2008) Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
  • ASTM D5835-95 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
  • ASTM D5835-95(2001) Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
  • ASTM E681-85 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
  • ASTM E681-98 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
  • ASTM E544-10 Standard Practices for Referencing Suprathreshold Odor Intensity
  • ASTM D2863-00 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
  • ASTM D6245-07 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
  • ASTM D6245-98 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
  • ASTM D6245-98(2002) Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
  • ASTM D6245-12 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
  • ASTM D6245-18 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
  • ASTM D5835-20 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
  • ASTM C1883-19 Standard Practice for Sampling of Gaseous Enriched Uranium Hexafluoride
  • ASTM D5835-95(2013) Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
  • ASTM D6007-02(2008) Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
  • ASTM F1794-97 Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
  • ASTM F1794-97(2004) Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
  • ASTM E2864-18 Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
  • ASTM E2864-18(2022) Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
  • ASTM F1794-97(2021) Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
  • ASTM F1794-97(2010) Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
  • ASTM F1792-97(2016)e1 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
  • ASTM F1794-97(2016)e1 Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
  • ASTM F1792-97(2021) Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
  • ASTM F1396-93(2012) Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
  • ASTM D5599-00(2005) Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM D5599-00 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM D5599-00(2010) Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM F1396-93(1999) Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
  • ASTM F1396-93(2020) Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
  • ASTM D6764-02 Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
  • ASTM D6764-02(2007) Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
  • ASTM D7607-11 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
  • ASTM D7607/D7607M-19 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
  • ASTM D6522-00 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
  • ASTM D6522-00(2005) Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
  • ASTM D6522-11 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
  • ASTM D2779-92(1997) Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids
  • ASTM D2779-92(2020) Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids
  • ASTM D1070-03 Standard Test Methods for Relative Density of Gaseous Fuels
  • ASTM D1070-03(2010) Standard Test Methods for Relative Density of Gaseous Fuels
  • ASTM D1070-85(1998) Standard Test Methods for Relative Density of Gaseous Fuels
  • ASTM D1070-03(2017) Standard Test Methods for Relative Density of Gaseous Fuels
  • ASTM D2780-92(1997) Standard Test Method for Solubility of Fixed Gases in Liquids
  • ASTM E611-08(2015) Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
  • ASTM E611-03 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
  • ASTM F1396-93(2005) Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
  • ASTM D2517-18(2023) Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
  • ASTM D7904-15 Standard Test Method for Determination of Water Vapor (Moisture Concentration) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS)
  • ASTM D6058-96(2011) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
  • ASTM D6058-96(2016) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
  • ASTM D2517-18 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
  • ASTM D7904-21 Standard Test Method for Determination of Water Vapor (Moisture Concentration) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS)
  • ASTM G86-98a(2005) Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
  • ASTM G86-17 Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
  • ASTM G125-00 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
  • ASTM G125-95e1 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
  • ASTM G125-00(2015) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
  • ASTM G125-00(2023) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
  • ASTM G125-00(2008) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
  • ASTM D6007-02 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
  • ASTM D6007-96 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
  • ASTM E611-08(2015)e1 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
  • ASTM D6007-22 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
  • ASTM D6007-14 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
  • ASTM D7542-09 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
  • ASTM E2269-03 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
  • ASTM E2269-05 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
  • ASTM D7821-12 Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
  • ASTM E611-08 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
  • ASTM D3429-93(1998) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
  • ASTM D7607/D7607M-11e1 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
  • ASTM D1142-95 Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • ASTM D6332-99(2005) Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
  • ASTM D6332-99 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
  • ASTM D6332-12(2021) Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
  • ASTM D6332-12 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
  • ASTM D6332-12(2017) Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
  • ASTM C721-14 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
  • ASTM E2649-09 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
  • ASTM E2269-14 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
  • ASTM D3827-92(2020) Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids

国家市场监督管理总局、中国国家标准化管理委员会, Oxygen standard gas concentration

  • GB/T 38301-2019 Determination of limiting oxygen concentration (LOC) of flammable gases and vapours

Association of German Mechanical Engineers, Oxygen standard gas concentration

  • VDI 2453 Blatt 3-1995 Gaseous air pollution measurement - Determination of the nitrogen monoxide and nitrogen dioxide concentration - Preparation of the calibration gas mixtures and determination of their concentration
  • VDI 2453 Blatt 1-1990 Gaseous air pollution measurement; determination of nitrogen dioxide concentration; photometric manual standard method (Saltzmann)
  • VDI 2462 Blatt 1-1974 Gaseous emission measurement; determination of sulphur dioxide concentration; iodometric thiosulfate method
  • VDI 2453 Blatt 2-2002 Gaseous air pollution measurement - Measurement of concentration of nitrogen monoxide and nitrogen dioxide - Calibration of NO/NOx chemiluminescence analysers using gas phase titration
  • VDI 2451 Blatt 3-1996 Measurement of gaseous immissions - Measurement of sulphur dioxide concentration - Tetrachloromercurate Pararosaniline (TCM) Method
  • VDI 2459 Blatt 1-2000 Gaseous emission measurement - Determination of carbon monoxide concentration using flame ionisation detection after reduction to methane

AENOR, Oxygen standard gas concentration

  • UNE-EN 14756:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
  • UNE-EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
  • UNE-EN 14625:2013 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • UNE-EN 14212:2013 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • UNE-EN 14211:2013 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
  • UNE-EN 14626:2013 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • UNE-EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • UNE-EN 14662-2:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography
  • UNE-EN 14662-4:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
  • UNE-EN 14662-1:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
  • UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • UNE-EN 1911:2011 Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method

Danish Standards Foundation, Oxygen standard gas concentration

  • DS/EN 14756:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
  • DS/EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • DS/EN 14212:2012 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • DS/EN 14211:2012 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
  • DS/EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • DS/EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • DS/EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
  • DS/EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
  • DS/EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography
  • DS/EN 1911:2010 Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method

Lithuanian Standards Office , Oxygen standard gas concentration

  • LST EN 14756-2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
  • LST EN 14625-2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • LST EN 14212-2012 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • LST EN 14211-2012 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
  • LST EN 14626-2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • LST EN 15549-2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • LST EN 14662-2-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography
  • LST EN 14662-1-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography
  • LST EN 14662-4-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
  • LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • LST EN 1911-2010 Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method

Group Standards of the People's Republic of China, Oxygen standard gas concentration

  • T/CMSA 0029-2022 Air negative oxygen ion concentration level icon
  • T/LCAA 005-2021 Determination of methane, nitrous oxide and carbon dioxide concentrations in gases——gas chromatography method

Japanese Industrial Standards Committee (JISC), Oxygen standard gas concentration

Shanxi Provincial Standard of the People's Republic of China, Oxygen standard gas concentration

  • DB14/T 1710-2018 Greenhouse Gas Carbon Dioxide Concentration Assessment Specification

Korean Agency for Technology and Standards (KATS), Oxygen standard gas concentration

Association Francaise de Normalisation, Oxygen standard gas concentration

  • NF X43-370*NF EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method : Paramagnetism
  • NF EN 14789:2017 Émissions de sources fixes - Détermination de la concentration volumique en oxygène - Méthode de référence normalisée : paramagnétisme
  • NF S66-270:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours.
  • NF S66-250*NF EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
  • NF EN 14625:2013 Air ambiant - Méthode normalisée de mesurage de la concentration en ozone par photométrie U.V
  • NF EN 1839:2017 Détermination des limites d'explosivité des gaz et vapeurs et détermination de la concentration limite en oxygène (CLO) des gaz et des vapeurs inflammables
  • NF EN 14212:2013 Air ambiant - Méthode normalisée pour le mesurage de la concentration en dioxyde de soufre par fluorescence UV
  • NF EN 14211:2012 Air ambiant - Méthode normalisée pour le mesurage de la concentration en dioxyde d'azote et monoxyde d'azote par chimiluminescence
  • NF X43-064*NF EN 14625:2013 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • NF X43-061*NF EN 14211:2012 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence.
  • NF X43-062*NF EN 14212:2013 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • NF EN 15549:2008 Qualité de l'air - Méthode normalisée pour le mesurage de la concentration du benzo[a]pyrene dans l'air ambiant
  • NF X43-560*NF EN 15549:2008 Air quality - Standard method for the measurement of the concentration of Benzo[a]pyrene in ambient air
  • NF X43-065*NF EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • NF EN 14626:2012 Air ambiant - Méthode normalisée de mesurage de la concentration en monoxyde de carbone par spectroscopie à rayonnement infrarouge non dispersif
  • NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
  • NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
  • NF X43-029-5*NF EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5 : diffusive sampling followed by solvent desorption and gas chromatography.
  • NF X43-320*NF EN 1911:2010 Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method.
  • NF EN 14662-3:2015 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 3 : prélèvement par pompage automatique avec analyse chromatographique en phase gazeuse sur site
  • NF EN 14662-5:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration de benzène - Partie 5 : prélèvement par diffusion suivi d'une désorption au solvant et d'une chromatographie gazeuse
  • NF EN 14662-2:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 2 : prélèvement par pompage suivi d'une désorption au solvant et d'une méthode de chromatographie en phase gazeuse
  • NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • NF EN 14662-1:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 1 : échantillonnage par pompage suivi d'une désorption thermique et d'une méthode chromatographie en phase gazeuse
  • NF EN 62358:2013 Noyaux de ferrite - Inductance spécifique normalisée pour noyaux à entrefer et tolérances associées
  • NF X43-029-3:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography.
  • NF X43-029-2*NF EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : pumped sampling followed by solvent desorption and gas chromatography
  • NF EN 1911:2010 Émissions de sources fixes - Détermination de la concentration massique en chlorures gazeux, exprimée en HCI - Méthode de référence normalisée
  • FD X46-033:2023 Guide d'application de la norme NF EN ISO 16000-7 - Partie 7 : Stratégie d'échantillonnage pour la détermination des concentrations en fibres d'amiante en suspension dans l'air

German Institute for Standardization, Oxygen standard gas concentration

  • DIN EN 14789:2017-05 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism; German version EN 14789:2017
  • DIN EN 14625:2022-11 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German and English version prEN 14625:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14625 (2012-12).
  • DIN EN 14625:2012-12 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German version EN 14625:2012 / Note: To be replaced by DIN EN 14625 (2022-11).
  • DIN EN 1839:2017-04 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours; German version EN 1839:2017 / Note: DIN EN 1839 (2012-12) and DIN EN 14756 (2007-02) remain valid alongside this standard until 2018-01-11.
  • DIN EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
  • DIN EN 14212 Berichtigung 1:2014-08 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence; German version EN 14212:2012, Corrigendum to DIN EN 14212:2012-11 / Note: To be replaced by DIN EN 14212 (2022-11).
  • DIN EN 14212:2012-11 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence; German version EN 14212:2012 / Note: To be replaced by DIN EN 14212 (2022-11).
  • DIN EN 14212:2022-11 Ambient air - Standard method for the measurement of the concentration of sulfur dioxide by ultraviolet fluorescence; German and English version prEN 14212:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14212 (2012-11), DIN EN...
  • DIN EN 14211:2012-11 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence; German version EN 14211:2012 / Note: To be replaced by DIN EN 14211 (2022-11).
  • DIN EN 14211:2022-11 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence; German and English version prEN 14211:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14211 ...
  • DIN EN 14626:2022-11 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German and English version prEN 14626:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14626 (201...
  • DIN EN 14626:2012-12 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012 / Note: To be replaced by DIN EN 14626 (2022-11).
  • DIN EN 14625:2012 Ambient air.Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German version EN 14625:2012
  • DIN EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
  • DIN EN 15549:2008-06 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
  • DIN EN 14211:2012 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence; German version EN 14211:2012
  • DIN EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
  • DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
  • DIN EN 14212:2012 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence; German version EN 14212:2012
  • DIN EN 14626:2012 Ambient air.Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012
  • DIN EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism; German version EN 14789:2017
  • DIN EN 14662-3:2016-02 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2015
  • DIN EN 14662-1:2022-09 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German and English version prEN 14662-1:2022 / Note: Date of issue 2022-07-29*Intended as r...
  • DIN EN 14662-1:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005 / Note: To be replaced by DIN EN 14662-1 (2022-09).
  • DIN EN 14662-4:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
  • DIN EN 14212 Berichtigung 1:2014 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence; German version EN 14212:2012, Corrigendum to DIN EN 14212:2012-11
  • DIN EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2005
  • DIN EN 14662-2:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005
  • DIN EN 14662-5:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography; German version EN 14662-5:2005
  • DIN EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
  • DIN EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005
  • DIN EN 1911:2010-12 Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method; German version EN 1911:2010

海关总署, Oxygen standard gas concentration

  • SN/T 5162-2019 Determination of limited oxygen concentrations for flammable gases and vapors

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Oxygen standard gas concentration

  • GB/T 21844-2008 Standard test method for concentration limits of flammability of chemicals(vapors and gases)
  • GB/T 31253-2014 Natural gas.Validation for gaseous reference materials.Direct measurement of calorific value and density
  • GB 19612-2004 Concentration limitation of air pollutants for the destruction of abandoned chemical weapons by Japan in China
  • GB 19059-2003 Regulation for concentration of pollutants in the workplace air for destruction of chemical weapons abandoned in China by Japan

British Standards Institution (BSI), Oxygen standard gas concentration

  • 22/30450365 DC BS EN 14625. Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • BS EN 14789:2017 Tracked Changes. Stationary source emissions. Determination of volume concentration of oxygen. Standard reference method: Paramagnetism
  • BS EN 14625:2012 Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • BS EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • BS EN 14211:2012 Ambient air. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
  • BS EN 14212:2012 Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • BS EN 14212:2012(2014) Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • 22/30450996 DC BS EN 14212. Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • BS EN 14211:2005 Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
  • 22/30450993 DC BS EN 14211. Ambient air. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
  • BS EN 14212:2005 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • BS EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo(a)pyrene in ambient air
  • BS EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • BS EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • 22/30450999 DC BS EN 14626. Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • BS EN 17346:2020 Ambient air. Standard method for the determination of the concentration of ammonia using diffusive samplers
  • BS EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Automated pumped sampling with in situ gas chromatography
  • 19/30367217 DC BS EN 17346. Ambient Air Quality. Standard method for the determination of the concentration of ammonia by diffusive sampling
  • BS EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
  • BS EN 14662-1:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
  • BS EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
  • BS EN 14662-4:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
  • BS EN 1911:2010 Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method
  • BS EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
  • BS EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
  • BS EN 14662-5:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
  • BS EN 14662-2:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
  • BS EN 62358:2012 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
  • BS EN 62358:2013 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
  • BS EN 14662-3:2015 Tracked Changes. Ambient air. Standard method for the measurement of benzene concentrations. Automated pumped sampling with in situ gas chromatography
  • BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

European Committee for Standardization (CEN), Oxygen standard gas concentration

  • EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • EN 14212:2012 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • prEN 14212 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • EN 864:1996 Medical Electrical Equipment - Capnometers for Use with Humans - Particular Requirements
  • EN 14211:2012 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
  • prEN 14211 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
  • EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours
  • EN 14789:2005 Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
  • EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
  • EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • CEN EN 15549-2008 Air quality — Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • EN 14212:2012/AC:2014 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • EN 14662-3:2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
  • EN 14662-3:2015 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
  • FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
  • EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
  • EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography

CEN - European Committee for Standardization, Oxygen standard gas concentration

  • EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • EN 14212:2005 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • EN 14211:2005 Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
  • PREN 17346-2019 Ambient Air Quality - Standard method for the determination of the concentration of ammonia by diffusive sampling

ES-UNE, Oxygen standard gas concentration

  • UNE-EN 14212:2013/AC:2014 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
  • UNE-EN 14662-3:2016 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
  • UNE-EN 62358:2012 Ferrite cores - Standard inductance factor for gapped cores and its tolerance (Endorsed by AENOR in February of 2013.)

American National Standards Institute (ANSI), Oxygen standard gas concentration

  • ASTM D2863-23 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
  • ANSI/ASTM D2517:2018 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
  • ASTM D6281-23 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) (Standard + Redline PDF Bundle)

SAE - SAE International, Oxygen standard gas concentration

Society of Automotive Engineers (SAE), Oxygen standard gas concentration

Compressed Gas Association (U.S.), Oxygen standard gas concentration

  • CGA P-6-2012 Standard density data, atmospheric gases and hydrogen

NL-NEN, Oxygen standard gas concentration

  • NVN 2824-1994 Air quality.Ambient air.Determination of the concentration of nitric acid,hydrochloric acid,ammonia and sulphur dioxide as gases.Rotating denuder method

RU-GOST R, Oxygen standard gas concentration

  • GOST R 50591-1993 Gas-consuming thermal units. Industrial gas-burners. Limiting concentration rates of NOx in combustion products
  • GOST R 8.766-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration dissolving in water gasses (oxygen, hydrogen)
  • GOST 8.652-2016 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration of dissolving in water gasses (oxygen, hydrogen)
  • GOST 12.1.014-1984 Occupational safety standards sytem. Air in the zone of operation. Method of measuring unhealthy matters concentration using indicator tubes
  • GOST 12.4.249-2013 Occupational safety standards system. Individual protective respiratory devices. Compressed oxygen or compressed oxygen-nitrogen type self-contained clos-circuit breathing apparatus. General technical requirements. Test methods. Marking
  • GOST R 12.4.268-2012 Occupational safety standards system. Respiratory protective devices. Method of definition of the maintenance the carbon dioxide and oxygen in the inhaled mix
  • GOST R 12.4.253-2011 Occupational safety standards system. Respiratory protective devices. Self-contained compressed oxygen and chemical oxygen apparatus for mine rescuers. General specifications

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Oxygen standard gas concentration

BE-NBN, Oxygen standard gas concentration

  • NBN T 96-201-1986 Workplace atmospheres - Determination of ethylene oxide concentration - Activated charcoal adsorption/solvent desorption/gas chromatographic method

NO-SN, Oxygen standard gas concentration

  • NS 4859-1983 Air quality - Emission measurement - Manual determination of concentration of sulphur trioxide/sulphuric acid and sulphur dioxide in dustladen gases - Isopropanol method

CZ-CSN, Oxygen standard gas concentration

VN-TCVN, Oxygen standard gas concentration

  • TCVN 7242-2003 Health care solid waste incinerators.Determination method of carbon monoxide concentration (CO) in fluegas
  • TCVN 7246-2003 Health care solid waste incinerator.Determination method of sulfur dioxides (SO2) concentration in fluegas
  • TCVN 7245-2003 Health care solid waste incinerator.Determination method of nitrogen oxides (NOx) concentration in fluegas

Professional Standard - Electricity, Oxygen standard gas concentration

  • DL/T 1002-2006 Calibration for low-level dissolved oxygen meter.standard gases calibration

HU-MSZT, Oxygen standard gas concentration

Professional Standard-Safe Production, Oxygen standard gas concentration

  • AQ 4202-2008 Administrative standard for personal exposure concentration of respirable coal dust in the air of workplace
  • AQ 4203-2008 Administrative standards for personal exposure concentration of respirable rock dust in the air of workplace

Professional Standard - Labor and Labor Safety, Oxygen standard gas concentration

  • LD 39-1992 Management standards for exposure concentration of respirable coal dust in air in workplaces
  • LD 41-1992 Management standards for exposure concentration of respirable rock dust in the air of workplaces

CH-SNV, Oxygen standard gas concentration

  • SN EN 17346-2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

PL-PKN, Oxygen standard gas concentration

  • PN-EN 17346-2020-11 E Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers
  • PN Z04156-01-1987 Air purity protection est for magnesium oxide nd calcium oxide ntroduction and Scope of the tandard
  • PN Z04157-01-1986 Air purity protection ests for calcium oxide ntroduction and scope of the tandard
  • PN Z04167-01-1986 Air purity protection ests for methoxyethyl alcohol ntroduction and scope f the standard
  • PN Z04174-01-1986 Air purity protection ests for buthoxyethyl alcohol ntroduction and scope of the tandard
  • PN Z04094 Arkusz 00-1974 Air puri?y pro?ec?ion Tes?s for car bon monoxide Introducfion and scope o? ?he standard
  • PN Z04095 Arkusz 00-1974 Air purity protection Tests for carbon dioxide Infroducfion and scope of the standard
  • PN Z04092 Arkusz 00-1974 Air purity protection Tes?s for nitric acid and nitrogen oxides Introduction and rang? of standard

未注明发布机构, Oxygen standard gas concentration

  • BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Underwriters Laboratories (UL), Oxygen standard gas concentration

  • UL 60079-29-2 BULLETIN-2023 UL Standard for Safety Explosive Atmospheres – Part 29-2: Gas Detectors - Selection, Installation, Use and Maintenance of Detectors for Flammable Gases and Oxygen

National Metrological Verification Regulations of the People's Republic of China, Oxygen standard gas concentration

  • JJG(核工) 17-1991 Test Method for Determination of Radioactive Gas Activity Using Inner Gas Proportional Counting Standard Device

SE-SIS, Oxygen standard gas concentration

  • SIS SS 02 84 25-1991 Air quality — Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Performance characteristics and calibration of automated measuring systems




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved