ZH
RU
ES

single phase dia

single phase dia, Total:499 items.

In the international standard classification, single phase dia involves: Vocabularies, Construction materials, Quantities and units, Fibre optic communications, Rotating machinery, Aerospace electric equipment and systems, Optics and optical measurements, Particle size analysis. Sieving, Electromechanical components for electronic and telecommunications equipment, Wood-based panels, Products of the chemical industry, Optical equipment, Electricity. Magnetism. Electrical and magnetic measurements, Structures of buildings, Metrology and measurement in general, Resistors, Welding, brazing and soldering, Piezoelectric and dielectric devices, Test conditions and procedures in general, Electrical wires and cables, Raw materials for rubber and plastics, Cargo equipment, Coatings and related processes used in aerospace industry, Plastics, Rubber, Water quality, Air quality, Integrated circuits. Microelectronics, Rectifiers. Convertors. Stabilized power supply, Electronic display devices, Company organization and management, Buildings, Earthworks. Excavations. Foundation construction. Underground works, Paper and board, Edible oils and fats. Oilseeds, Geology. Meteorology. Hydrology, Lubricants, industrial oils and related products, Products of the textile industry, Materials and articles in contact with foodstuffs, Installations in buildings, Analytical chemistry, Aircraft and space vehicles in general, Organic chemicals, Thermodynamics and temperature measurements, Iron and steel products, Occupational safety. Industrial hygiene, Switchgear and controlgear, Electric traction equipment, Electrical accessories, Hand-held tools, Railway rolling stock, Equipment for the chemical industry, Physics. Chemistry, Applications of information technology, Document imaging applications, Photography, Fuels, Tyres, Power transmission and distribution networks, Transformers. Reactors, Horology, Electrical engineering in general, Graphic technology, Protection of and in buildings, Radiocommunications, Character symbols, Freight distribution of goods, Materials for aerospace construction, Mechanical structures for electronic equipment, Ceramics, Components and accessories for telecommunications equipment, Open systems interconnection (OSI).

CO-ICONTEC, single phase dia

ICONTEC 1490-1979

CL-INN, single phase dia

INDITECNOR 2.4-7ch-1948

TR-TSE, single phase dia

TS 295-1965 OUANTIT?ES AND UNITS OF PERIODIC AND RELATED PHENAMENA

American National Standards Institute （ANSI), single phase dia

ANSI/ASAE EP329.3-2013(R2022) Single-Phase Rural Distribution Service for Motors and Phase Converters
ANSI/ASAE EP329.3-2013(R2018) Single-Phase Rural Distribution Service for Motors and Phase Converters
ANSI/EIA/TIA 455-169A:1992 Chromatic Dispersion Measurement of Optical Fibers by the Phase-Shift Method
ANSI/IEEE 114:2010 Standard Test Procedure for Single-Phase Induction Motors
ANSI/TIA/EIA 455-157-1994 Measurement of Polarization Dependent Loss (PDL) of Single-Mode Fiber Optic Components
ANSI/IEEE 270:2006 Standard Definitions for Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)
ANSI/TIA-455-157-1994 Measurement of Polarization Dependent Loss (PDL) of Single-Mode Fiber Optic Components
ANSI/TIA/EIA 455-175-B-2003 Chromatic Dispersion Measurement of Single-Mode Optical Differential Phase Shift Method
ANSI/TIA-455-175-B-2003 Chromatic Dispersion Measurement of Single-Mode Optical Differential Phase Shift Method
ANSI/TAPPI T400 sp-2011 Sampling and accepting a single lot of paper, paperboard, containerboard, or related product
ANSI/IEEE 1216:2000 Guide for the Application of Faulted Circuit Indicators for 200A, Single-Phase Underground Residential Development (URD)
ANSI/TIA/EIA 455-197-2000 Differential Group Delay Measurement of Single-Mode Components and Devices by the Differential Phase Shift Method
ANSI/TIA-455-197-2000 Differential Group Delay Measurement of Single-Mode Components and Devices by the Differential Phase Shift Method
ANSI/ASTM D6057:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ANSI C57.12.50-1981 Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 120 to 600 Volts, Requirements for; Correction June 1982

American Society for Testing and Materials (ASTM), single phase dia

ASTM C1209-05 Standard Terminology of Concrete Masonry Units and Related Units
ASTM C1209-01 Standard Terminology of Concrete Masonry Units and Related Units
ASTM C1209-99a Standard Terminology of Concrete Masonry Units and Related Units
ASTM C1209-01a Standard Terminology of Concrete Masonry Units and Related Units
ASTM C1209-05e1 Standard Terminology of Concrete Masonry Units and Related Units
ASTM D1038-11 Standard Terminology Relating to Veneer and Plywood
ASTM C1262-08 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
ASTM C1262-08a Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
ASTM C1262/C1262M-18 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
ASTM D1914-95(2004)e1 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM D3465-21 Standard Guide for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM E2700-09 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
ASTM D558-03 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM E947-83(1996)e1 Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM D558-11 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM E947-22 Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM D1914-95(2010) Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM D585-97 Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
ASTM D3465-00(2007)e1 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D3465-14 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM C140/C140M-23 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
ASTM D7083-04 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
ASTM E2409-20 Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol(Gas Chromatographic Method)
ASTM E2409-20a Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol(Gas Chromatographic Method)
ASTM D2360-00 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
ASTM D3465-00 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D2360-04 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
ASTM D2360-04a Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
ASTM D2360-04e1 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
ASTM D2360-03 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
ASTM E947-83(2002) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM E947-83(2015) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM E207-00 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials By Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM E207-08 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM D4827-03(2009) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM D2360-08 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
ASTM D2360-11 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
ASTM D8311-20 Standard Test Method for Impurities in Monoethylene Glycol by Gas Chromatography with Normalization
ASTM D7083-16(2022) Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
ASTM D4254-00 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D4254-00(2006) Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D7504-10 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-09e1 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7731-17 Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D2360-07 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
ASTM D7504-20 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-17 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D585-97(2002) Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
ASTM D7504-21 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-17a Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-16 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-09 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM E2269-21 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
ASTM D7504-11 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM C1552-23 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
ASTM D7083-16 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
ASTM D4254-00(2006)e1 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D5917-09 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
ASTM D5917-12 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
ASTM D4254-14 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D4254-16 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D6057-96(2001)e1 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ASTM D6057-96 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ASTM D6057-96(2006) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ASTM D7731-11 Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D4827-93(1998) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM D7083-04(2010)e1 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography

RO-ASRO, single phase dia

STAS 737/7-1983 International System of Units (SI) UNITS OF PERIODIC AND RELA- TED PHENOMENA
STAS 737/11-1984 International Svstem of Units (SI) UNITS OF LIGHT AND RELATED ELECTROMAGNETIC RADIATIONS
STAS 10298-1975 Single-phase static power converters for traction. Tests
STAS 5854-1958
STAS 1569-1957

CZ-CSN, single phase dia

CSN 01 1710-1954
CSN 73 1376-1975 Radiography of concrete structures and building units

International Organization for Standardization (ISO), single phase dia

ISO 31-2:1978 Quantities and units of periodic and related phenomena
ISO 31-6:1980 Quantities and units of light and related electromagnetic radiations
ISO 31-2:1978/Amd 1:1985 Quantities and units of periodic and related phenomena — Amendment 1
ISO 31-6:1980/Amd 1:1985 Quantities and units of light and related electromagnetic radiations — Amendment 1
ISO 5475:1978 Rubber — Identification of polymers — Pyrolytic/gas chromatographic method — Single polymers
ISO 6401:2008 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method
ISO 7270:1987 Rubber; Identification of polymers (single polymers and blends); Pyrolytic gas chromatographic method
ISO 2561:1974 Plastics; Determination of residual styrene monomer in polystyrene by gas chromatography
ISO/DTR 4976 Railway applications — Scope, users and lists of rolling stock relevant operation and maintenance documentation
ISO/TS 11251:2010 Nanotechnologies - Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
ISO 7761:2004 Micrographics - Single-core cartridge for 16 mm processed microfilm - Dimensions and operational constraints
IEC 80000-14:2008 Quantities and units - Part 14: Telebiometrics related to human physiology
ISO 6845:1989 Surface active agents; technical alkane sulfonates; determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
ISO 717-1:1996/Amd 1:2006 Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation; Amendment 1: Rounding rules related to single number ratings and single number quantities
ISO 4581:1987 Plastics; Styrene/acrylonitrile copolymers; Determination of residual acrylonitrile monomer content; Gas chromatography method
ISO 4581:1994 Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method
ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
ISO 5803:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determination of monoclinic phase in zirconia
ISO 28580:2009 Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results
ISO 28580:2018 Passenger car, truck and bus tyre rolling resistance measurement method - Single point test and correlation of measurement results
ISO 6845:1982 Surface active agents — Technical alkane sulphonates — Determination of mean relative molecular mass of alkane monosulphonates
ISO 6401:1985 Plastics; Homopolymer and copolymer resins of vinyl chloride; Determination of residual vinyl chloride monomer; Gas chromatographic method

Aeronautical Radio Inc., single phase dia

ARINC 404A CHAP 4 Standardized Spacing of Adjacent Equipment Units

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., single phase dia

IEEE 114-2010 Test Procedure for Single-Phase Induction Motors
IEEE 114-2001 Test Procedure for Single-Phase Induction Motors
IEEE 839-1986 GUIDE: PROCEDURES FOR TESTING SINGLE-PHASE AND POLYPHASE INDUCTION MOTORS FOR USE IN HERMETIC COMPRESSORS

Japanese Industrial Standards Committee (JISC), single phase dia

JIS C 4203:2001 Single phase induction motors for general purpose
JIS K 6231:2004 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method
JIS K 6231:1998 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method
JIS C 4034-30:2011 Rotating electrical machines -- Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
JIS K 7380:1999 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of residual vinyl chloride monomer -- Gas chromatographic method

Society of Automotive Engineers (SAE), single phase dia

SAE AIR34A-1996 PENALTIES IN PERFORMANCE OF THREE-PHASE, FOUR-WIRE, 400-CYCLE MOTORS CAUSED BY THE OPENING OF ONE PHASE
SAE AIR34A-2010 PENALTIES IN PERFORMANCE OF THREE-PHASE, FOUR-WIRE, 400-CYCLE MOTORS CAUSED BY THE OPENING OF ONE PHASE
SAE AIR34-1957 PENALTIES IN PERFORMANCE OF THREE-PHASE, FOUR-WIRE, 400-CYCLE MOTORS CAUSED BY THE OPENING OF ONE PHASE
SAE AMS2535B-2015 Coating, Vapor Deposited Poly-Monochloro-Para-Xylylene for Microcircuits
SAE J3039-2020 Definition and Measurement of Power Transfer Unit Speed-Dependent Parasitic Loss
SAE ARP5996B-2014 Evaluation of Coking Propensity of Aviation Lubricants Using the Single Phase Flow Technique
SAE ARP6028A-2020 Configuration Control for Maintaining Correlation of Gas Turbine Engine Test Cells
SAE AS5692-2004 ARC Fault Circuit Breaker (AFCB), Aircraft, Trip-Free Single Phase 115 VAC, 400 Hz - Constant Frequency
SAE ARP5996A-2003 Evaluation of Coking Propensity of Aviation Lubricants Using the Hot Liquid Process Simulator (HLPS) Single Phase Flow Technique

Hebei Provincial Standard of the People's Republic of China, single phase dia

DB13/T 5222-2020 Determination of Purity of Nematic Thermotropic Liquid Crystal Monomer by Gas Chromatography
DB13/T 5097-2019 Gas Chromatography and Gas Chromatography-Mass Spectrometry Examination Method for 3-Fluoro-4-cyanophenol Ester Liquid Crystal Monomers
DB13/T 5223-2020 Method for Determination of Voltage Holding Rate of Nematic Thermotropic Liquid Crystal Monomer
DB13/T 5537-2022 Determination of Resistivity of Nematic Thermotropic Liquid Crystal Monomer by DC Voltage Method

GOSTR, single phase dia

GOST 7012-1977 Single-operator single-phase transformers for automatic submerged arc welding. General specifications
GOST 18628-1973 Single-phase feeding transformers for main with voltage from 1000 up to 35000 V and a power up to 4000 V A. Basic parameters

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, single phase dia

GB/T 26647.1-2011 Determination of particle size distribution.Single-particle light interaction methods.Part 1:Light interaction considerations
GB/T 11540-1989 Isolate and synthetic aroma chemicals--Determination of relative density
GB/T 22064-2008 Microscopes-Interfacing connection for 35 mm SLR photo cameras
GB/T 5113-1985 Atomic mass unit and kilogram conversion tables
GB/T 4615-2013 Poly (vinyl chloride).Determination of residual vinyl chloride monomer.Gas-chromatographic method
GB/T 4614-1984 Determination of residual styrene monomer in polystyrene by gas chromatography
GB/T 23296.13-2009 Food contact materials.Determination of vinyl chloride monomer in plastics.Gas chromatography
GB/T 4615-2008 Poly(vinyl chloride).Determination of residual vinyl chloride monomer content.Gas chromatographic method
GB/T 29040-2012 Test methods of rolling resistance for motor vehicle tyres.Single point test and correlation of measurement results
GB/T 29613.1-2013 Rubber.Analysis by pyrolytic gas-chromatographic methods.Part 1:Identification of polymers (single polymers and polymer blends)
GB/T 8661-2008 Plastics.Styrene/acrylonitrile copolymers.Determination of residual acrylonitrile monomer content.Gas chromatography method

VE-FONDONORMA, single phase dia

Professional Standard - Electron, single phase dia

SJ 3274-1990 Safety requirements for single-phase A.C. power supply switches
SJ 1786-1981 Method of measurement for forward voltage of silicon single phase bridge rectifiers,up to 5A
SJ 1791-1981 Method of measurement for insulation robustness of silicon single phase bridge rectifiers,up to 5A
SJ 1788-1981 Method of measurement for operational junction temperature of silicon single phase bridge rectifiers,up to 5A
SJ 1789-1981 Method of measurement for maximum operational frequency of silicon single phase bridge rectifiers,up to 5A
SJ 1790-1981 Method of measurement for overload current multiplication factor of silicon single phase bridge rectifiers,up to 5A

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., single phase dia

ASHRAE LV-11-C018-2011 CFD Simulation of Single-Phase Flow in Plate Heat Exchangers
ASHRAE TO-98-12-2-1998 Baseline Model for Utility Bill Analysis Using Both Weather and Non-Weather-Related Variables

HU-MSZT, single phase dia

Institute of Electrical and Electronics Engineers (IEEE), single phase dia

IEEE 114-1982 IEEE Standard Test Procedure for Single-Phase Induction Motors
IEEE Std 114-2001 IEEE Standard Test Procedure for Single-Phase Induction Motors
IEEE Std 114-1982 IEEE Standard Test Procedure for Single-Phase Induction Motors
IEEE Std 114-2010 IEEE Standard Test Procedure for Single-Phase Induction Motors
IEEE 270-2006 Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)
IEEE P114/D1, April 2010 IEEE Draft Standard Test Procedure for Single-Phase Induction Motors
IEEE Std 839-1986 IEEE Guide: Procedures for Testing Single-Phase and Polyphase Induction Motors for Use in Hermetic Compressors
IEEE Std P270/D10d, Sep 2005 IEEE Draft Standard Definitions for Selected Quantities, Units, and Related Terms, With Special Attention to the International System (SI) of Units
IEEE PC37.242/D12, December 2012 IEEE Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control
IEEE Std C37.242-2021 IEEE Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control

BELST, single phase dia

STB 1171-99 Single-phase, single-post transformers for manual arc welding for voltage 220 v. General specifications

BE-NBN, single phase dia

NBN G 53-001
NBN 251-1951
NBN 251-1953
NBN 575-1963
NBN T 63-154-1983 Surface active agents - Technical alkane sulphonates - Determination of mean relative molecular mass of alkane monosulphonates
NBN-ISO 6845:1990 Oppervlakactieve stoffen - Technische alkaansulfonaten - Bepaling van de gemiddelde relatieve moléculaire massa van de alkaanmonosulfonaten en van hun gehalte
NBN 697 F-1967

Canadian Standards Association (CSA), single phase dia

CSA C747-94-CAN/CSA-1994 Essais De Rendement Energetique Des Petits Moteurs Monophases Et Triphases Fiche No 1
CSA C2-M91-CAN/CSA-1991 ONAN and LNAN Single-phase and three-phase distribution transformers.Eighth Edition.General Instruction No1
CSA C227.3-06-CAN/CSA UPD 1-2007 Low-Profile, Single-Phase, Pad-Mounted Distribution Transformers with Separable Insulated High-Voltage Connectors
CSA C227.3-06-CAN/CSA-2006 Transformateurs de distribution monophas閟 sur socle, surbaiss閟, avec connecteurs haute tension isol閟 amovibles Quatri鑝e Edition
CSA C2.2-06-2006 Transformateurs de distribution monophas閟 destin閟 au montage sur poteau pour distributeurs d掗lectricit镻remi鑢e Edition
CSA C227.3-2006 Transformateurs de distribution monophasés sur socle, surbaissés, avec connecteurs haute tension isolésamovibles (Quatrième édition)

Defense Logistics Agency, single phase dia

DLA SMD-5962-96741 REV A-2005 MICROCIRCUIT, HYBRID, DIGITAL, SINGLE CHANNEL, DRIVER-RECEIVER
DLA SMD-5962-90987-1992 MICROCIRCUIT, LINEAR, FREQUENCY CONTROLLER, PHASE LOCKED, MONOLITHIC SILICON
DLA SMD-5962-89609 REV B-2012 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, PHASE LOCKED LOOP WITH VOLTAGE CONTROLLED OSCILLATOR, MONOLITHIC SILICON
DLA SMD-5962-95630 REV G-2006 MICROCIRCUIT, DIGITAL-LINEAR, RADIATION HARDENED, SINGLE 16-CHANNEL ANALOG MUX/DEMUX WITH OVERVOLTAGE PROTECTION, MONOLITHIC SILICON
DLA MIL-DTL-23928/1 E-2013 PANEL, ELECTRICAL, 125 VOLTS, POWER DISTRIBUTION FOR ALB-1 AND NLB-1 CIRCUIT BREAKERS, 4-24 CIRCUITS, DRIPPROOF, THREE PHASE FEED, SINGLE AND THREE PHASE LOADS, TOTALLY ENCLOSED AND WATERTIGHT
DLA O-C-275 C-1969 CHEMICALS, PHOTOGRAPHIC (SINGLE SUBSTANCE), GENERAL SPECIFICATION FOR [Use In Lieu Of: DLA O-C-00275 D CANC NOTICE 1]
DLA SMD-5962-88729 REV B-2008 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, HEX INVERTING DRIVERS, MONOLITHIC SILICON
DLA SMD-5962-88718 REV C-2013 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, HEX INVERTER WITH OPEN-DRAIN OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-90780 REV C-2012 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, 10-BIT BUS INTERFACE FLIP-FLOPS WITH NON-INVERTING AND INVERTING INPUTS, MONOLITHIC SILICON
DLA SMD-5962-88757 REV C-2013 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, PHASE-LOCKED-LOOP WITH VOLTAGE CONTROLLED OSCILLATOR, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-84074 REV F-2010 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, INVERTING OCTAL BUFFER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-87629 REV E-2010 MICROCIRCUIT, DIGITAL, FAST CMOS, NONINVERTING OCTAL BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-90506 REV B-2012 MICROCIRCUIT, DIGITAL, BIPOLAR, OCTAL BUS TRANSCEIVER WITH THREE-STATE NONINVERTING OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-86828 REV D-2010 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, HEX BUFFER/DRIVER WITH INVERTING THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-86812 REV D-2011 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, HEX BUFFER/DRIVER WITH INVERTING THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-86062 REV E-2012 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, OCTAL INVERTING D-TYPE LATCH WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-84061-1984 MICROCIRCUITS, DIGITAL, ADVANCED LOW POWER SCHOTTKY TTL, INVERTER GATE, BUFFER OUTPUT MONOLITHIC SILICON
DLA SMD-5962-77020 REV E-2005 MICROCIRCUIT, DIGITAL, CMOS, STROBED HEX INVERTER/BUFFER, MONOLITHIC SILICON
DLA SMD-5962-89609 REV A-2006 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, PHASE LOCKED LOOP WITH VOLTAGE CONTROLLED OSCILLATOR, MONOLITHIC SILICON
DLA SMD-5962-90686 REV A-2009 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, HEX INVERTER WITH OPEN DRAIN OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-88575 REV A-2010 MICROCIRCUIT, DIGITAL, FAST CMOS, 10-BIT NONINVERTING BUS INTERFACE LATCH WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON

IN-BIS, single phase dia

German Institute for Standardization, single phase dia

DIN 40150:1979-10 Concepts for the arrangement in connection with functional and constructional units
DIN EN 12701:2001-12 Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials; German version EN 12701:2001
DIN 277-3:2005 Areas and volumes of building - Part 3: Quantities and reference units
DIN EN 60444-1:2000 Measurement of quartz crystal unit parameters by zero phase technique in a -network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a -network (IEC 60444
DIN 30763-3:2022-10 Waste management - Exchange of order-related performance data - Part 3: Web services / Note: Date of issue 2022-09-23
DIN 6855-2:2013-01 Constancy testing of nuclear medical measuring systems - Part 2: Single crystal gamma-cameras used in planar scintigraphy and in anger type gamma cameras with rotating detector heads used in single photon emission tomography
DIN EN 60444-2:1997-10 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 2: Phase offset method for measurement of motional capacitance of quartz crystal units (IEC 60444-2:1980); German version EN 60444-2:1997
DIN EN 60034-12:2008 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors (IEC 60034-12:2002 + A1:2007); German version EN 60034-12:2002 + A1:2007
DIN EN 13044-3:2011-04 Intermodal Loading Units - Marking - Part 3: Markings of semi-trailers related to rail operation; German version EN 13044-3:2011
DIN EN ISO 6845:2003 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989); German version EN ISO 6845:2003
DIN EN 60027-3:2007-11 Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units (IEC 60027-3:2002); German version EN 60027-3:2007 / Note: To be replaced by DIN EN 60027-3 (2015-08).
DIN EN ISO 6845:2003-06 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989); German version EN ISO 6845:2003
DIN ISO 2768-1:1991-06 General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989
DIN IEC 60122-2:1993-09 Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystal units for frequency control and selection; identical with IEC 60122-2:1983
DIN IEC 60115-6-1:1986-09 Fixed resistors for use in electronic equipment; blank detail specification: Fixed resistor networks with individually measurable resistors, all of equal value and equal dissipation; assessment level E; identical with IEC 60115-6-1, edition 1983
DIN EN 60444-1:2000-09 Measurement of quartz crystal unit parameters by zero phase technique in a <pi>-network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a <pi>-net...

YU-JUS, single phase dia

JUS H.F8.303-1988 Natural gas. Simple analysis of natural gas. Method by gas chromatography
JUS ISO 2561:1992 Plastics. Determination of residual styrene monomer in polystyrene. Gas chromatographic method
JUS ISO 4581:1992 Plastics. Styrene/acrylonitrile copolymers. Determination of residual acrylonitrile monomer content. Gas chromatography method

Professional Standard - Petroleum, single phase dia

SY/T 6406-1999 Maintenance and inspection for magnetic single - shot & multi - shot survey instruments

(U.S.) Telecommunications Industries Association , single phase dia

TIA/EIA-455-157-1994 FOTP-157 Measurement of Polarization Dependent Loss (PDL) of Single-Mode Fiber Optic Components
TIA-455-228-2002 FOTP-228 Relative Group Delay and Chromatic Dispersion Measurement of Single-Mode Components and Devices by the Phase Shift Method
TIA-455-228-2002(2012) FOTP-228 Relative Group Delay and Chromatic Dispersion Measurement of Single-Mode Components and Devices by the Phase Shift Method
TIA-455-198-2002(2012) FOTP-198 Measurement of Polarization Dependence of Insertion Loss of Single-Mode Fiberoptic Components by a Mueller Matrix Method
TIA-455-198-2002 FOTP-198 Measurement of Polarization Dependence of Insertion Loss of Single-Mode Fiberoptic Components by a Mueller Matrix Method
TIA-455-197-2000 FOTP-197 Differential Group Delay Measurement Of Single-Mode Components and Devices by the Differential Phase Shift Method

TIA - Telecommunications Industry Association, single phase dia

TIA/EIA-455-175-A-1992 FOTP-175 Chromatic Dispersion Measurement of Single-Mode Optical Fibers by the Differential Phase Shift Method
TIA/EIA-455-197-2000 FOTP-197 Differential Group Delay Measurement of Single-Mode Components and Devices by the Differential Phase Shift Method
TIA/EIA-455-169-A-1992 FOTP-169 Chromatic Dispersion Measurement of Single-Mode Optical Fibers by the Phase-Shift Method (Withdrawn May 2003)

Military Standard of the People's Republic of China-General Armament Department, single phase dia

GJB 4779-1997(XG1-2015) Gas Chromatography Method for Determination of Sears Modification Sheet 1-2015

National Electrical Manufacturers Association（NEMA), single phase dia

NEMA MG 11-1977 ENERGY MANAGEMENT GUIDE FOR SELECTION AND USE OF SINGLE-PHASE MOTORS

CH-SNV, single phase dia

SNV 24818-1937

Korean Agency for Technology and Standards (KATS), single phase dia

KS C 5115-61-2013 Fixed resistors for use in electronic equipment－Part 6：Blank detail specification：Fixed resistor networks with individually measurable resistors, all of equal value and equal dissipation Assessment level E
KS C IEC 60444-2-2002(2022) Measurement of quartz crystal unit parameters by zero phase technique in a p-network－Part 2：Phase offset method for measurement of motional capacitance of quartz crystal units
KS A ISO 31-6:2012 Quantities and units－Part 6：Light and related electromagnetic radiations
KS C 5115-6102-2013 Fixed resistors for use in electronic equipment－Part 6：Detail specification：Fixed thick film resistor networks with individually measurable resistors, all of equal value and equal dissipation, class 1 (single-in-line network)
KS M ISO 2561:2013 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561:2003 Plastics-Determination of residual styrene monomer in polystyrene(PS) and inpact-resistant polystyrene(PS-I) by gas chromatography
KS C 5115-6101-2013 Fixed resistors for use in electronic equipment－Part 6：Detail specification：Fixed thick film resistor networks with individually measurable resistors, all of equal value and equal dissipation, class 1(dual-in-line network)
KS C IEC 60034-12:2008 Rotating electrical machines－Part 12：Starting performance of single-speed three-phase cage induction motors for voltages up to and including 660 V
KS C IEC 60034-12:2020 Rotating electrical machines — Part 12: Starting performance of single-speed three-phase cage induction motors
KS M ISO 6845:2007 Surface N agents-Technical alkane sulfonates-Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
KS M ISO 6845-2007(2018) Surface active agents－Technical alkane sulfonates－Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
KS X 5622-2004 Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi－function devices that contain printer components
KS K ISO 9864:2007 Geosynthetics-Test method for the determination of mass per unit area of geotextiles and geotextile-related products
KS M 3308-2016 Test method for residual vinyl chloride monomer content of poly vinyl chloride by gas chromatography/mass spectrometer
KS K ISO 9864-2007(2017) Geosynthetics－Test method for the determination of mass per unit area of geotextiles and geotextile-related products
KS X ISO/IEC 10035-1:2008 Information technology－Open Systems Interconnection－Connectionless protocol for the Association Control Service Element：Protocol specification
KS M ISO 4581:2006 Plastics ? Styrene/acrylonitrile copolymers-Determination of residual acrylonitrile monomer content-Gas chromatography method
KS M ISO 4581:2016 Plastics ? Styrene/acrylonitrile copolymers－Determination of residual acrylonitrile monomer content－Gas chromatography method
KS M ISO 4581-2016(2021) Plastics?Styrene/acrylonitrile copolymers－Determination of residual acrylonitrile monomer content－Gas chromatography method
KS X 5622-2009 Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi－function devices that contain printer components
KS M ISO 28580:2011 Passenger car, truck and bus tyres-Methods of measuring rolling resistance-Single point test and correlation of measurement results
KS M ISO 28580:2016 Passenger car, truck and bus tyres－Methods of measuring rolling resistance－Single point test and correlation of measurement results
KS K ISO 9864-2007(2022) Geosynthetics－Test method for the determination of mass per unit area of geotextiles and geotextile-related products

Association Francaise de Normalisation, single phase dia

NF EN 60909-3:2010 Courants de court-circuit dans les réseaux triphasés à courant alternatif - Partie 3 : courants durant deux court-circuits monophasés simultanés séparés à la terre et courants de court-circuit partiels s'écoulant à travers la terre
NF T43-002:1954 Rubber. Determination of stress by unit area corresponding to a fixed elongation.
NF L93-080:1985 Ground equipment requirements for compatibility with aircraft unit load devices.
NF T51-706*NF EN ISO 6401:2008 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method
NF M82-305:1981 Conditions techniques applicables au matériel électrique - Transformateurs auxiliaires monophasés des coffrets du fond.
NF Z62-002*NF EN 1922:2000 Information technology - Character repertoire and coding for interworking with telex services
NF G38-108:1995 Geotextiles and geotextiles and geotextile-related products. Determination of mass per unit area.
NF X43-251:1993 Air quality. Workplace atmospheres. Determination of the concentration of gaseous monocyclic aromatic hydrocarbons.
M82-305:1981 Mining equipment. Technical requirements for electrical equipment. One-phase auxiliary transformers for underground boxes.
NF C51-312:2003 Rotating electrical machines - Part 12 : starting performance of single-speed three-phase cage induction motors.
NF C51-312*NF EN 60034-12:2017 Rotating electrical machines - Part 12 : starting performance of single-speed three-phase cage induction motors
NF EN 60034-12:2017 Machines électriques tournantes - Partie 12 : caractéristiques de démarrage des moteurs triphasés à induction à cage à une seule vitesse
NF X45-200:1995 Ions separation in liquid phase. Polymeric ion exchange membranes. Characterisation and test methods of homopolar membranes.
NF C03-001-14:2009 Quantities and units - Part 14 : telebiometrics related to human physiology.
NF C51-312/A1:2007 Rotating electrical machines - Part 12 : starting performance of single-speed three-phase cage induction motors.
NF S20-007:1969 PHOTOGRAPHY. TRANSPARENCIES AND COLOUR PHOTOGRAPHS. CONDITIONS FOR INDIVIDUAL AND COMPARATIVE EXAMINATION.
NF T73-238:1989 Surface active agents. Technical alkane sulfonates. Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content.
NF T73-238*NF EN ISO 6845:2003 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
NF C51-330:2009 Rotating electrical machines - Part 30 : efficiency classes of single-speed, three-phase, cage-induction motors (IE-code).
NF EN 60027-3:2007 Symboles littéraux à utiliser en électrotechnique - Partie 3 : grandeurs logarithmiques et connexes, et leurs unités
NF C93-621*NF EN 60444-1 + A1:2000 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 1 : basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a pi-network
NF G38-108*NF EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
UTE C93-611/A1U*UTE C93-611/A1:1979 COMPONENTS FOR ELECTRIC EQUIPMENT. PIEZOELECTRIC DEVICES. QUARTZ CRYSTAL UNITS FOR OSCILLATORS. RELEVANT ARTICLE SHEETS.
NF EN ISO 12228-1:2014 Détermination de la teneur en stérols individuels et totaux - Méthode par chromatographie en phase gazeuse - Partie 1 : corps gras d'origines animale et végétale
NF R12-754:2009 Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results.
NF L55-072*NF EN 4705:2020 Aerospace series - Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment

Association of German Mechanical Engineers, single phase dia

DVS 2913-2001 "Guidelines for measurements at single-phase spot welding machines, projection seam and seam welding machines"
DVS 2913-1978 "Guidelines for measurements at single-phase spot welding machines, projection seam and seam welding machines"

AWS - American Welding Society, single phase dia

RWMA BULLETIN 25- Spot Welding 65-35 Brass on Single-Phase Equipment with Slope Control

US-RWMA, single phase dia

RWMA BULL 25 Spot Welding 65-35 Brass on Single-Phase Equipment with Slope Control

AENOR, single phase dia

UNE 82100-6:1996 QUANTITIES AND UNITS. PART 6: LIGHT AND RELATED ELECTROMAGNETIC RADIATIONS.
UNE-EN 60034-12:2003 Rotating electrical machines -- Part 12: Starting performance of single-speed three-phase cage induction motors
UNE-EN ISO 6401:2009 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008)
UNE-EN 1015-21:2003 Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates.
UNE-EN ISO 6845:2003 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989)
UNE-EN ISO 12228-1:2014 Determination of individual and total sterols contents - Gas chromatographic method - Part 1: Animal and vegetable fats and oils (ISO 12228-1:2014)

Group Standards of the People's Republic of China, single phase dia

T/SBX 041-2021 Determination of Purity of Tricyclic Alkyne Liquid Crystal Monomer by Gas Chromatography
T/SBX 044-2021 Determination of Purity of Terphenyl Liquid Crystal Monomers by Gas Chromatography
T/SBX 070-2022 Determination of Purity of Alkyl Biphenyl Liquid Crystal Monomers by Gas Chromatography
T/SBX 027-2019 Determination of Resistivity of Nematic Thermotropic Liquid Crystal Monomer by DC Voltage Method
T/SBX 042-2021 Determination of Purity of Bicyclohexylbiphenyl Liquid Crystal Monomers by Gas Chromatography
T/SBX 069-2022 Determination of Purity of Alkylcyclohexylbiphenyl Liquid Crystal Monomers by Gas Chromatography
T/CASME 012-2021 Determination for β-nicotinamide mononucleotide purity and content High performance liquid chromatography
T/SBX 043-2021 Determination of Purity of Dicyclohexyl Phenyl Liquid Crystal Monomers by Gas Chromatography
T/NAIA 0120-2022 Determination of Tannic Acid Content in Wine Grapes and Wine by High Performance Liquid Chromatography
T/SBX 038-2020 Determination of Purity of 3,5-Difluoro-4-cyanophenol Ester Liquid Crystal Monomer by Gas Chromatography
T/SBX 045-2021 Determination of Purity of Phenol Alkylcyclohexylcarboxylate Liquid Crystal Monomers by Gas Chromatography

未注明发布机构, single phase dia

ISO 31-2:1992/Cor 1:1993 Quantities and units — Part 2: Periodic and related phenomena
BS ISO 13323-1:2000(2002) Determination of particle size distribution — Single - particle light interaction methods — Part 1 : Light interaction considerations
BS EN 965:1995(1999) Geotextiles and geotextile - related products — Determination ofmass per unit area
BS EN ISO 12228-1:2014(2017) Determination of individual and total sterols contents — Gas chromatographic method Part 1 : Animal and vegetable fats and oils

ES-UNE, single phase dia

SAE ARP5758A-2023 Trend Analysis for Maintaining Correlation of Gas Turbine Engine Test Cells
UNE-EN 50419:2023 Marking of electrical and electronic equipment (EEE) in respect to separate collection of waste EEE (WEEE)
UNE-EN 60034-12:2017 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors (Endorsed by Asociación Española de Normalización in July of 2017.)
UNE-EN 60444-2:1997 MEASUREMENT OF QUARTZ CRYSTAL UNIT PARAMETERS BY ZERO PHASE IN A PI-NETWORK. PART 2: PHASE OFFSET METHOD FOR MEASUREMENT OF MOTIONAL CAPACITANCE OF QUARTZ CRYSTAL UNITS (Endorsed by AENOR in October of 1997.)
UNE-EN 60444-3:1997 MEASUREMENT OF QUARTZ CRYSTAL UNIT PARAMETERS BY ZERO PHASE TECHNIQUE IN A PI-NETWORK. PART 3: BASIC METHOD FOR THE MEASUREMENT OF TWO-TERMINAL PARAMETERS OF QUARTZ CRYSTAL UNITS UP TO 200 MHZ BY PHASE TECHNIQUE IN A PI-NETWORK WITH COMPENSATION OF THE...
UNE-EN 60444-1:1997 MEASUREMENT OF QUARTZ CRYSTAL UNIT PARAMETERS BY ZERO PHASE TECHNIQUE IN A PI-NETWORK. PART 1: BASIC METHOD FOR THE MEASUREMENT OF RESONANCE FREQUENCY AND RESONANCE RESISTANCE OF QUARTZ CRYSTAL UNITS BY ZERO PHASE TECHNIQUE IN A PI-NETWORK (Endorsed by...

United States Navy, single phase dia

NAVY QPL-AS5692 NOTICE 1-2012 ARC FAULT CIRCUIT BREAKER (AFCB), AIRCRAFT, TRIP-FREE SINGLE PHASE AND THREE PHASE 115 VAC, 400 HZ ?CONSTANT FREQUENCY
NAVY MIL-T-15108 C (1)-1985 TRANSFORMERS, POWER, STEP-DOWN, SINGLE-PHASE, 60 HERTZ, 1-KILOVOLTAMPERE APPROXIMATE MINIMUM RATING, DRY TYPE, NAVAL SHIPBOARD
NAVY MIL-T-15108 C-1975 TRANSFORMERS, POWER, STEP-DOWN, SINGLE-PHASE, 60 HERTZ, 1-KILOVOLTAMPERE APPROXIMATE MINIMUM RATING, DRY TYPE, NAVAL SHIPBOARD
NAVY MIL-T-17221 B (1)-1985 TRANSFORMERS, POWER, DISTRIBUTION; SINGLE PHASE, 400 HERTZ, INSULATION SYSTEM CLASS 220 DEG. C, DRY (AIR COOLED) (NAVAL SHIPBOARD USE)
NAVY MIL-T-17221 B-1973 TRANSFORMERS, POWER, DISTRIBUTION; SINGLE PHASE, 400 HERTZ, INSULATION SYSTEM CLASS 220 DEG. C, DRY (AIR COOLED) (NAVAL SHIPBOARD USE)
NAVY QPL-17221-36-2004 TRANSFORMERS, POWER, DISTRIBUTION; SINGLE PHASE, 400 HERTZ, INSULATION SYSTEM CLASS 220 DEG. C, DRY (AIR COOLED), (NAVAL SHIPBOARD USE)

ZA-SANS, single phase dia

PIESA 1063-2005 Split-concentric single-phase aerial service cable - for domestic service connections with separate neutral and earth conductors
SANS 60034-12:2003 Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors
SANS 60034-30:2009 Rotating electrical machines Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
SANS 60034-12:2008 Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors
SANS 8165-2:1999 Water quality - Determination of selected monovalent phenols Part 2: Method by derivatization and gas chromatography

ANSI - American National Standards Institute, single phase dia

IT1.80-1995 Photography (Photofinishing) - Identification of Customer Order Components for Automatic Matching in a Centralized Photofinishing Plant

American Nuclear Society (ANS), single phase dia

ANS 58.9-1981 Single failure criteria for light water reactor safety-related fluid systems

ESDU - Engineering Sciences Data Unit, single phase dia

ESDU 86022 A-1988 High-fin staggered tube banks: heat transfer and pressure drop for turbulent single phase gas flow.
ESDU 95027-1995 Pressure loss and heat transfer for single phase flow in tubes containing twisted tape inserts.
ESDU 84016 B-1988 Low-fin staggered tube banks: heat transfer and pressure loss for turbulent single-phase crossflow.
ESDU 82021 A-1983 Pressure loss and heat transfer for single-phase turbulent flow in roughened channels: methods of calculation.
ESDU 97007-1998 Heat transfer enhancement in heat exchanger design and utilisation. Part 1. Tube inserts in single-phase flow.

SAE - SAE International, single phase dia

SAE ARP5996C-2015 Evaluation of Coking Propensity of Aviation Lubricants Using the Single Phase Flow Technique
SAE ARP6028A-2015 Configuration Control for Maintaining Correlation of Gas Turbine Engine Test Cells
SAE ARP5996B-2003 Evaluation of Coking Propensity of Aviation Lubricants Using the Hot Liquid Process Simulator (HLPS) Single Phase Flow Technique
SAE ARP5996-2003 Evaluation of Coking Propensity of Aviation Lubricants Using the Hot Liquid Process Simulator (HLPS) Single Phase Flow Technique

Danish Standards Foundation, single phase dia

DS/ISO 24293:2009 Water quality - Determination of individual isomers of nonylphenol - Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS)
DS/EN 60444-2:1998 Measurement of quartz crystal unit parameters by zero phase technique in a PI-Network - Part 2: Phase offset method for measurement of motional capacitance of quartz crystal units
DS 94:1933 Tangential keys and keyways for unidirectional torque. Shaft diameter and corresponding keyway section
DS/EN ISO 6401:2008 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method
DS/EN ISO 12228:1999 Animal and vegetable fats and oils - Determination of individual and total sterols contents - Gas chromatographic method
DS/ISO 7270:1988 Rubber. Identification of polymers (single polymers and blends). Pyrolytic gas chromatographic method
DS/EN 60034-12/A1:2008 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
DS/EN 60034-12:2003 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
DS/EN ISO 6845:2003 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
DS/EN 80000-14:2009 Quantities and units - Part 14: Telebiometrics related to human physiology
DS/EN 1015-21:2003 Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates
DS/EN 60034-30:2009 Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
DS/EN 60027-3:2007 Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units
DS/EN 60444-1/A1:2001 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a pi-network
DS/EN 60444-1:1998 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a pi-network
DS/EN 60444-3:1998 Measurement of quartz crystal unit parameters by zero phase technique in a pi-Network - Part 3: Basic method for the measurement of two-terminal parameters of quartz crystal units up to 200 MHz by phase technique in a pi-network with compensation of the p
DS/IEC 115-6-1:1986 Fixed resistors for use in electronic equipment - Part 6: Blank detail specification: Fixed resistor network with individually measurable resistors, all of equal value and equal dissipation

PL-PKN, single phase dia

PN E02113-1974 Rotating electrical machines One and threephase synchronous generators driven by internal combustion Output, voltage and rotating speed ratings
PN M42025-03-1990 System of mechanical structures f the 482,6 mm series ubracks and associated plug-in units asic dimensions
PN C05061-1986 Rubbers, latices synthetic Determination the free monomers content by the gas chromatographic method
PN C89294-1986 Homopolymer and copolymer resins of winyl chloride Determination of residual vinyl chloride monomer by gas chromatographic method
PN-EN 60027-3-2007/Ap2-2021-10 E Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units
PN C89409-1992 Dispersions of homopolymers and copolymers of vinyl acetate Determination of residual monomers by gas chromatographic method
PN Z01001-11-1988 Air purity protection Terms, definitions and units Terms, definitions relatin to air-pollution sources
PN E06712-1992 Rotating electrical machines Starting performance of single-speed three-phase cage induction motors for voltages up to and including 660 V

U.S. Air Force, single phase dia

AIR FORCE MIL-PRF-38314-1997 MANUALS, TECHNICAL: OPERATION AND ASSOCIATED CHECKLIST (SPACE SYSTEMS) PREPARATION OF
AIR FORCE MIL-PRF-38311 C-1997 MANUALS, TECHNICAL: OPERATION AND ASSOCIATED CHECKLIST (INTERCONTINENTAL BALLISTIC MISSILE) PREPARATION OF

British Standards Institution (BSI), single phase dia

BS EN 60034-12:2002 Rotating electrical machines - Starting performance of single-speed three-phase cage induction motors
BS 7951:2000 Electricity meters - Alternating-current single-phase static watt-hour telemeters of accuracy class 1 or 2
PD IEC/TR 61000-1-7:2016 Electromagnetic compatibility (EMC). General. Power factor in single-phase systems under non-sinusoidal conditions
BS EN 60034-30:2009 Rotating electrical machines - Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
BS EN ISO 15011-4:2006 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Fume data sheets
BS EN 50152-3-3:2001 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Measurement, control and protection devices for specific use in a.c. traction systems - Single-phase inductive voltage transformers - Single-phase voltage transform
BS EN 50152-2:1999 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Single-phase disconnectors, earthing switches and switches with Um above 1 kV
BS 7012-13:1997 Light microscopes. Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation)
BS EN 60034-12:2017 Tracked Changes. Rotating electrical machines. Starting performance of single-speed three-phase cage induction motors
BS DD ISO/TS 11251:2010 Nanotechnologies. Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
22/30445728 DC BS EN ISO 6401. Plastics. Poly(vinyl chloride). Determination of residual vinyl chloride monomer. Gas-chromatographic method
BS EN 60444-2:1997 Measurement of quartz crystal unit parameters. Phase offset method for measurement of motional capacitance of quartz crystal units
BS EN ISO 6845:1989 Surface active agents - Technical alkane sulfonates - Determination of mean relative molecular mass and content of the alkane monosulphonates and the alkane monosulfonate content
BS 4553-2:1998 Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation
BS ISO 21501-3:2019 Determination of particle size distribution. Single particle light interaction methods - Light extinction liquid-borne particle counter
BS EN 50419:2022 Tracked Changes. Marking of electrical and electronic equipment (EEE) in respect to separate collection of waste EEE (WEEE)
BS EN ISO 6845:2003 Surface active agents. Technical alkane sulfonates. Determination of mean relative molecular mass and content of the alkane monosulphonates and the alkane monosulfonate content
BS 6513-5:1987 Wideband cabled distribution systems - Recommendations for one-way and interactive data services
BS EN ISO 6401:2008 Plastics — Poly(vinyl chloride) — Determination of residual vinyl chloride monomer — Gaschromatographic method (ISO 6401:2008)
BS 4553-1:1998 Specification for 600/1000 V single-phase split concentric electric cables - Cables having PVC insulation
BS ISO 21501-2:2019 Determination of particle size distribution. Single particle light interaction methods - Light scattering liquid-borne particle counter
BS EN 60909-3:2003 Short-circuit current calculation in three-phase a.c. systems - Currents during two separate simultaneous single phase line-to- earth short circuits and partial short-circuit currents flowing through earth
BS EN 60444-1:1993 Measurement of quartz crystal unit parameters. Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a $Gp-network
BS EN 50152-1:2007 Railway applications — Fixed installations — Particular requirements for a.c. switchgear — Part 1: Single-phase circuit-breakers with Un above 1 kV
BS EN ISO 9863-2:1996 Geotextiles and geotextile-related products. Determination of thickness at specified pressures. Procedure for determination of thickness of single layers of multilayer products
BS EN 50152-1:1999 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Single-phase circuit-breakers with Um above 1 kV
BS EN 50152-1:2008 Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Single-phase circuit-breakers with Un above 1 kV

Professional Standard - Commodity Inspection, single phase dia

SN/T 0735.6-1997 Essential oils, perfumery isolates and synthetics for export.Determination of relative density
SN/T 3342-2012 Determination of residual monomers in acrylic resin.Gas chromatography-mass spectrometry
SN/T 3819-2014 Determination of 2-(2-butoxyethoxy) ethanol in liquid abstergent.Gas chromatography
SN/T 3547-2013 Food contact materials.Polymers determination of styrene monomer.Gas chromatography
SN/T 4031-2014 Determination of acrylamide monomer residues in cosmetics for export.LC-MS/MS method

ANS - American Nuclear Society, single phase dia

58.9-2002 Single failure criteria for light water reactor safety-related fluid systems
58.9-1981 Single failure criteria for light water reactor safety-related fluid systems (Addendum: 08/14/2002)

Standard Association of Australia （SAA）, single phase dia

AS 60034.12:2009

IX-UIC, single phase dia

UIC OR 505-4-2007 Effects of the application of the kinematic gauges defined in the 505 series of leaflets on the positioning of structures in relation to the tracks and of the tracks in relation to each other

European Committee for Standardization (CEN), single phase dia

EN ISO 6401:2022 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer using gas-chromatographic method (ISO 6401:2022)
EN ISO 6401:2008 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008)
EN 965:1995 Geotextiles and Geotextile-Related Products - Determination of Mass per Unit Area
EN ISO 6845:2003 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
CENELEC EN 60027-3-2007 Letter symbols to be used in electrical technology — Part 3: Logarithmic and related quantities, and their units
EN 13044-3:2011 Intermodal Loading Units - Marking - Part 3: Markings of semi-trailers related to rail operation
EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005)
EN 964-1:1995 Geotextiles and Geotextile-Related Products - Determination of Thickness at Specified Pressure - Part 1: Single Layers

CEN - European Committee for Standardization, single phase dia

EN ISO 6401:2004 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer - Gas chromatographic method

Professional Standard - Aviation, single phase dia

HB 6742-1993 Determination of Crystal Orientation of Single Crystal Blades by X-ray Backblow Laue Photography

国家市场监督管理总局、中国国家标准化管理委员会, single phase dia

GB/T 40896-2021 Determination of diethylene glycol monoethyl ether in cosmetics—Gas chromatography mass spectrometry

Professional Standard - Agriculture, single phase dia

GB/T 8381.7-2009(XG1-2019) Determination of Lalaquindox in Feed High Performance Liquid Chromatography "No. 1 Amendment"

US-FCR, single phase dia

FCR AFAD 71-700-1977 ENGINEERING DATA PREPARATION CONTRACT PROVISIONS FOR DESIGN ACTIVITY DRAWINGS AND ASSOCIATED LISTS

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), single phase dia

ASHRAE OR-05-10-2-2005 Thermal and Hydraulic Characteristics of Brazed Plate Heat Exchangers - Part I: Review of Single-Phase and Two-Phase Adiabatic and Flow Boiling Characteristics

Professional Standard - Machinery, single phase dia

JB/T 8158-1999 Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V
JB/T 9601-1999 Balance quality and technological specification for rotors of single-phase series motors intended to be used in electric tools
JB/T 9601-2013 Balance accuracy and process rule of single-phase series motor rotor for electric tools

IT-UNI, single phase dia

UNI 3134-1972 Hot rolled or forged finished steel products. Round bars for single-point cutting tools and shanks thereof.
UNI 3135-1972 Hot rolled or forged finished steel products. Square bars for single-point cutting tools and shanks thereof.
UNI 3136-1972 Hot rolled or forged finished steel products. Flat bars for single-point cutting tools and shanks thereof.
UNI 6448-1969

RU-GOST R, single phase dia

GOST 28327-1989 Rotating electrical machines. Starting performances of single-speed three-phase cage induction motors for voltages to 660 V inclusive
GOST R 56343-2015 Monocyclic aromatic hydrocarbons. Determination of trace Impurities by gas chromatography test method using the external calibration
GOST IEC 60034-12-2021 Rotating electrical machines. Part 12. Starting performance of single-speed three-phase cage induction motors
GOST R 52714-2007 Motor gasolines. Determination of individual and group hydrocarbon composition by method of capillary gas chromatography
GOST R 52714-2018 Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas chromatography method
GOST R IEC 60034-12-2009 Rotating electrical machines. Part 12. Starting performance of single-speed three-phase cage induction motors
GOST 28614-1990 Rubber. Identification of polymers (single polymers and blends) by pyrolytic gas chromatographic method
GOST R 54413-2011 Rotating electrical machines. Part 30. Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)

CENELEC - European Committee for Electrotechnical Standardization, single phase dia

EN 60444-6:1997 Measurement of Quartz Crystal Unit Parameters Part 6: Measurement of Drive Level Dependence (DLD)
EN 60034-12:1995 Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors for Voltages up to and Including 690 V@ 50 Hz (Incorporates Amendments A2: 1995 and A11: 1999)
EN 60255-3:1998 Electrical Relays Part 3: Single Input Energizing Quantity Measuring Relays with Dependent or Independent Time

KR-KS, single phase dia

KS C IEC 60444-6-2023 Measurement of quartz crystal unit parameters — Part 6: Measurement of drive level dependence(DLD)
KS C IEC 60034-12-2020 Rotating electrical machines — Part 12: Starting performance of single-speed three-phase cage induction motors
KS M ISO 6845-2007(2023) Surface active agents－Technical alkane sulfonates－Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
KS M ISO 4581-2016 Plastics?Styrene/acrylonitrile copolymers－Determination of residual acrylonitrile monomer content－Gas chromatography method

EU/EC - European Union/Commission Legislative Documents, single phase dia

2009/C 54/04-2009 NOTICES FROM MEMBER STATES LIST OF NATURAL MINERALWATERS RECOGNISED BY MEMBER STATES (Text with EEA relevance)
2009/524/EC-2009 COMMISSION RECOMMENDATION on measures to improve the functioning of the single market (Text with EEA relevance)
2010/C 65/01-2010 NOTICES FROM MEMBER STATES LIST OF NATURAL MINERAL WATERS RECOGNISED BY MEMBER STATES (Notices; Text with EEA relevance)

VN-TCVN, single phase dia

TCVN 6627-12-2011 Rotating electrical machines.Part 12: Starting performance of single-speed three-phase cage induction motors
TCVN 7870-14-2010 Quantities and units.Part 14: Telebiometrics related to human physiology
TCVN 6627-30-2011 Rotating electrical machines.Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)

International Electrotechnical Commission (IEC), single phase dia

IEC 60034-12:2002 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
IEC 60034-12:2007 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
IEC 60034-12:2016 RLV Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
IEC 60034-12:2002+AMD1:2007 CSV Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
IEC 60034-12:2016 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
IEC 60297-3:1984 Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 3 : Subracks and associated plug-in units
IEC 60909-3:1995 Short-circuit current calculation in three-phase a.c. systems - Part 3: Currents during two separate simultaneous single phase line-to-earth short circuits and partial short-circuit currents flowing through earth
IEC 60457-2:1974 Rigid precision coaxial lines and their associated precision connectors. Part 2 : 50 ohm 7 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector
IEC 60034-12:2002/AMD1:2007 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors; Amendment 1
IEC 60034-30:2008 Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage induction motors (IE code)
IEC 60297-5-107:2001 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-107: Subracks and associated plug-in units; Rear-mounted plug-in units

European Committee for Electrotechnical Standardization（CENELEC）, single phase dia

EN 60034-12:2017 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors

Indonesia Standards, single phase dia

SNI IEC 60034-12:2011 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
SNI 7857-2013

GM North America, single phase dia

GM W170-1988 Engineering Specifications Procedure Standardization of Information on Engineering Notices, Parts List, and Related Forms

Lithuanian Standards Office , single phase dia

LST EN ISO 6401:2009 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008)
LST EN ISO 12228:2000 Animal and vegetable fats and oils - Determination of individual and total sterols contents - Gas chromatographic method (ISO 12228:1999)
LST EN 1015-21-2003 Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates
LST EN 60444-3-2001 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network. Part 3: Basic method for the measurement of two-terminal parameters of quartz crystal units up to 200 MHz by phase technique in a pi-network with compensation of the pa
LST EN ISO 6845:2003 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989)
LST EN 60444-6-2001 Measurement of quartz crystal unit parameters. Part 6: Measurement of drive level dependence (DLD) (IEC 60444-6:1995)
LST EN 60444-1+A1-2001 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network -- Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a pi-network (IEC 60444-1:
LST EN 60034-12-2003 Rotating electrical machines. Part 12: Starting performance of single-speed three-phase cage induction motors (IEC 60034-12:2002)
LST EN 80000-14-2009 Quantities and units -- Part 14: Telebiometrics related to human physiology (IEC 80000-14:2008)

PT-IPQ, single phase dia

NP EN 1597-2-2000 Welding consumables Test methods Part 2:Preparation of test piece for single-run and two-run techinique test specimens in steel
NP 2193-1986
NP 3133/1-1985

International Telecommunication Union (ITU), single phase dia

ITU-T G.650.2-2005 Definitions and test methods for statistical and non-linear related attributes of single-mode fibre and cable Study Group 15; Covering Note: 10/03/2005
ITU-T A.2 AMD 1-2006 Presentation of Contributions Relative to the Study of Questions Assigned to the ITU-T Amendment 1: Single type of input contribution
ITU-T G.650.2-2007 Definitions and test methods for statistical and non-linear related attributes of single-mode fibre and cable Study Group 15
ITU-T G.650.2-2015 Definitions and test methods for statistical and non-linear related attributes of single-mode fibre and cable (Study Group 15)
ITU-T L.69-2007 Personal digital assistant requirements and relevant data structure for infrastructure and network elements management Study Group 6

NZ-SNZ, single phase dia

AS/NZS 2341.0:2002 Methods of Testing Bitumen and Related Roadmaking Products Part 0: General Introduction and List of Standards

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, single phase dia

GB/T 15544.4-2017 Short-circuit current calculation in three-phase a.c.systems—Part 4: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth

Professional Standard - Light Industry, single phase dia

QB/T 1537-2012 Technical specifications and test methods of single-phase permanent magnet stepper motors for analogue quartz watches
QB/T 1038-2011 Technical specifications and test methods of single-phase permanent magnet stepper motors for analogue quartz clocks

Hunan Provincial Standard of the People's Republic of China, single phase dia

DB43/T 2193-2021 Determination of Maca and O6-Monoethyl Maca in Water Environment by Liquid Chromatography-Tandem Mass Spectrometry

工业和信息化部, single phase dia

QB/T 1038-2020 Technical requirements and test methods for single-phase permanent magnet stepper motors for analog quartz clocks

SE-SIS, single phase dia

SIS SS-EN 2495-1990 Aerospace series — Single-pole circuit breakers temperature compensatedrated currents up to 25 A — Product standard

Electronic Components, Assemblies and Materials Association, single phase dia

ECA CB8-1981 List of Approval Agencies, U.S. and Other Countries, Impacting Electronic Components and Equipment

API - American Petroleum Institute, single phase dia

API MPMS 20.2-2016 Manual of Petroleum Measurement Standards Chapter 20.2 Production Allocation Measurement Using Single-phase Devices (FIRST EDITION)

国家能源局, single phase dia

NB/SH/T 0993-2019 Determination of silicon content in gasoline and related products by single-wavelength dispersive X-ray fluorescence spectrometry

IEC - International Electrotechnical Commission, single phase dia

IEC 60444-3:1986 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a PI-Network Part 3: Basic Method for the Measurement of Two-Terminal Parameters of Quartz Cyrstal Units up to 200 MHz by Phase Technique in a PI-Network with Compensation of the Par
IEC 60411-1:1975 Power Convertors for Electric Traction Part 1: Single-Phase Power Convertors Using Thyristors (Edition 1.0)

NL-NEN, single phase dia

NEN 1110-1983 Paper and board - Determination of single sheet thickness, relative thickness an apparent density of paper and board and of the bulking thickness of paper
NEN 5352-1990 Binders for paints and varnishes - Isocyanate resins Gaschromatographic determination of monomeric diisocyanates

AT-ON, single phase dia

ONORM S 5271-1997 Planar scintigraphy and Single photon emission computed tomography - Constancy tests of functional Performance characteristics

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, single phase dia

ITU-T G.650-1993 Definition and Test Methods for the Relevant Parameters of Single-Mode Fibres - Transmission Media Characteristics (Study Group XV) 49 pp