ZH
RU
ES

Dynamic Viscosity of Metals

Dynamic Viscosity of Metals, Total:497 items.

In the international standard classification, Dynamic Viscosity of Metals involves: Adhesives, Bearings, Petroleum products in general, Wood, sawlogs and sawn timber, Fuels, Measurement of volume, mass, density, viscosity, Coatings and related processes used in aerospace industry, Road vehicle systems, Rubber, Surface treatment and coating, Pipeline components and pipelines, Aerospace fluid systems and components, Welding, brazing and soldering, Waxes, bituminous materials and other petroleum products, Construction materials, Lubricants, industrial oils and related products, Ceramics, Materials for aerospace construction, Fluid power systems, Paints and varnishes, Testing of metals, Powder metallurgy, Nuclear energy engineering, Corrosion of metals, Measurement of force, weight and pressure, Mechanical testing, Cutting tools, Fasteners, Road engineering, Sports equipment and facilities, Aircraft and space vehicles in general, Vibrations, shock and vibration measurements, Equipment for entertainment, Electrical wires and cables, Vocabularies, Structures of buildings, Chipless working equipment, Linear and angular measurements, Particle size analysis. Sieving, Semiconductor devices, Plastics.

(U.S.) Ford Automotive Standards, Dynamic Viscosity of Metals

FORD FLTM EU-BU 003-2-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD FLTM BU 003-2-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD FLTM BU 003-02-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD FLTM EU-BU 003-02-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD ESB-M11P30-A-1985 ADHESION REQUIREMENTS, ADHESIVE FOR BONDING MOLDED WEATHERSTRIP TO PAINTED METAL IN MODULE WINDOW, ASSEMBLY
FORD FLTM BP 122-01-2007 DETERMINATION OF COLD ADHESION REQUIREMENTS OF WEATHERSTRIP LOW FRICTION COATINGS TO PAINTED METAL OR GLASS
FORD WSK-M2G329-A-2007 ADHESIVE, EPOXY, SOLVENT FREE, 180 DEGREES C CURING 80 DEGREES C APPLICABLE, METAL/METAL, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G329-A2-2007 ADHESIVE, EPOXY, SOLVENT FREE, 180 DEGREES C CURING, 80 DEGREES C APPLICABLE, METAL/METAL, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2G329-A)
FORD WSK-M2G329-A3-2007 ADHESIVE, EPOXY, SOLVENT FREE, 180 DEGREES C CURING 60 DEGREES C APPLICABLE, METAL/METAL, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P-1111A*** (Shown on WSK-M2G329-A)
FORD WSB-M11P27-B-2000 ADHESION REQUIREMENT, ADHESIVE FOR BONDING FRP/FRP AND FRP/PAINTED METAL PARTS ASSEMBLED AFTER VEHICLE ELECTROCOAT
FORD WSS-M2P177-C1-2011 PAINT PERFORMANCE, METAL SUBSTRATES, LOW VISIBILITY, 4 WEEK RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***

American Society for Testing and Materials (ASTM), Dynamic Viscosity of Metals

ASTM D1062-02 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D1062-96e1 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D1062-08(2015) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D1062-08 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D7945-14 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D7945-15 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D1062-08(2023) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D7042-11a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7483-13 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7483-08 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7042-16e1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7483-13a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7042-12 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D3433-99(2012) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D1002-05 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002-99 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002-01 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D3433-99(2020) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D445-14 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids 40;and Calculation of Dynamic Viscosity41;
ASTM D445-14e1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids 40;and Calculation of Dynamic Viscosity41;
ASTM D445-14e2 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids &40;and Calculation of Dynamic Viscosity&41;
ASTM D445-17 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D2295-96 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D1002-10 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002-10(2019) Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D2295-96(2002) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D2295-96(2008) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D6821-02(2007) Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D6821-20 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D6821-20a Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D6821-18 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D6821-02 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D6821-02e1 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D6821-14 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D6821-12 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D6821-17 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM C383-97 Standard Test Method for Wet Adhesion of Thermal Insulating Cements to Metal (Withdrawn 2002)
ASTM D2295-96(2016) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D5618-94(2005) Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
ASTM D5618-94(2011) Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
ASTM E1949-03(2009) Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM E1949-02 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM B1021-21 Standard Test Method for Peel Resistance of Metal Sheets Joined by High Strength Bonds
ASTM B212-09 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM F580-78(1991)e1 Test Method for Adhesion Strength of Bondable Films to Substrates in Ribbon-Wire Bonds
ASTM D2293-96 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D2293-96(2002) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D2294-96(2002) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D2294-96 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D2294-96(2008) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D5656-01 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM F3415-20 Standard Test Method for Triaxial Shear Strength and Cohesion of Equine Sports Surfaces
ASTM E1949-98 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM B905-00(2005) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
ASTM B905-00(2010) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
ASTM D3003-01(2012) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM B212-99 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM B212-99(2006) Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM B417-00(2006)e1 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM B417-00 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM A1073/A1073M-14 Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet
ASTM D5656-10(2017) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D4684-07 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-08 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-12 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D3658-90(1995) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D3658-01(2008) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D4684-02a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-02 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM A1073/A1073M-17 Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
ASTM A1073/A1073M-21 Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
ASTM D5656-10 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D3658-01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D5656-04 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D5656-04e1 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM E139-06 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM D4684-99e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-20 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-18 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-07e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-17a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-17 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-20a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM E1681-03 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E1681-03(2008)e1 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E1681-03(2013) Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM D6896-03 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6896-12 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6896-03e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM F68-16 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
ASTM F689-97(2011) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
ASTM D5656-95(2000) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D3658-01 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM F689-97 Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
ASTM F689-97(2004) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
ASTM E1681-03(2008)e2 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM D4684-14 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D6896-20 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6896-17 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6896-20a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6896-18 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6896-14 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM E1681-23 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM B417-22 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM B417-18 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM E1681-03(2013)e1 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E1681-03(2020) Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

CZ-CSN, Dynamic Viscosity of Metals

CSN 66 8510-1960 Method of test for strength properties of adhesives in shear by tension loading (metal to metal)
CSN 65 6216-1981 Petroleum products. Determination of kinematic viscosity and calculation of dynamic viscosity
CSN ISO 2819:1994 Metallic coatings on metallic substrates. Electrodeposited and chemically deposited coatings. Review of methods available for testing adhesion
CSN 42 0890 Cast.11-1982 Testing of metal powders Strenght determination of pressed compacts
CSN 69 0010-4.3 ZZ1-2000

German Institute for Standardization, Dynamic Viscosity of Metals

DIN 54452:1981 Testing of adhesives for metals and adhesively bonded metal joints; compression shear test
DIN EN ISO 3104:2021-01 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020); German version EN ISO 3104:2020 / Note: To be replaced by DIN EN ISO 3104 (2022-11).
DIN EN ISO 3104:2022-11 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO/DIS 3104:2022); German and English version prEN ISO 3104:2022 / Note: Date of issue 2022-10-14*Intended as replacement ...
DIN EN ISO 18335:2023-06 Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO/DIS 18335:2023); German and English version prEN ISO 18335:2023 ...
DIN EN ISO 3104:1999 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994 + Cor. 1:1997); German version EN ISO 3104:1996 + AC:1999
DIN 51562-4:1999 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscometer calibration and determination of the uncertainty of measurement
DIN EN 15190:2007 Structural adhesives - Test methods for assessing long term durability of bonded metallic structures; German version EN 15190:2007
DIN/TS 54464:2021 Adhesives - Determination of tensile lap-shear strength of bonded assemblies with composite and metal adherends
DIN EN 2828:1993 Aerospace series; adhesion test for metallic coatings by burnishing; german version EN 2828:1993
DIN EN 2830:1993 Aerospace series; adhesion test for metallic coatings by shearing action; german version EN 2830:1993
DIN EN 13702:2018-12 Bitumen and bituminous binders - Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method; German version EN 13702:2018
DIN EN 13523-17:2019-12 Coil coated metals - Test methods - Part 17: Adhesion of strippable films; German version EN 13523-17:2019
DIN 31665:1993 Plain bearings; testing of bearing metals; resistance to corrosion by lubricants and static conditions
DIN EN ISO 19879:2021-06 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021); German version EN ISO 19879:2021
DIN ISO 4384-2:1982 Plain bearings; hardness testing of bearing metals; solid materials
DIN EN ISO 10270:2020 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO/DIS 10270:2020); German and English version prEN ISO 10270:2020
DIN ISO 4386-2:2015 Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses >= 2 mm (ISO 4386-2:2012)
DIN EN ISO 19879:2019 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO/DIS 19879:2019); German and English version prEN ISO 19879:2019
DIN ISO 4386-2:1982 Plain bearings; metallic multilayer plain bearings; destructive testing of bond for bearing metal layer thicknesses 2 mm
DIN EN ISO 9974-3:2000-09 Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996); German version EN ISO 9974-3:2000
DIN EN ISO 1179-4:2008-08 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007); German version EN ISO 1...
DIN ISO 4384-2:2014 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials (ISO 4384-2:2011)
DIN 30912-6:1990 Sintered metal materials; sint-guide-lines; part 6: fatigue strength of sintered steels
DIN EN 2781:1998 Aerospace series - Non-metallic materials; structural adhesives - Test methods; determination of the primer thickness; German version EN 2781:1998
DIN EN ISO 10270:2008 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:1995 + Cor. 1:1997); German version EN ISO 10270:2008
DIN 66136-3:2007 Determination of the degree of dispersion of metals using chemisorption - Part 3: Flow method
DIN EN ISO 8434-1:2018-11 Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO 8434-1:2018); German version EN ISO 8434-1:2018
DIN EN 13523-6:2002 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test); German version EN 13523-6:2002
DIN EN ISO 1179-3:2008-08 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007); ...
DIN EN ISO 10270:2011 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:1995+Cor. 1:1997); German version EN ISO 10270:2008
DIN ISO 10129:2018 Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions (ISO 10129:2017); Text in German and English
DIN EN ISO 1179-1:2014-03 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013); German version EN ISO 1179-1:2013
DIN EN 14673:2007 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals; German version EN 14673:2006
DIN EN 2243-6:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain; German and English version EN 2243-6:2005
DIN EN 2243-6:2006-07 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain; German and English version EN 2243-6:2005
DIN EN ISO 9974-3:2000 Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996); German version EN ISO 9974-3:2000

British Standards Institution (BSI), Dynamic Viscosity of Metals

BS 7585-2:1992 Metallic multilayer plain bearings - Method for destructive testing of bond for bearing metal layer thickness 2 mm
BS EN ISO 3104:2020 Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
BS ISO 4386-2:2019 Tracked Changes. Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
22/30427649 DC BS EN ISO 3104. Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
17/30366325 DC BS EN ISO 3104. Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
BS 7585-1:1992 Metallic multilayer plain bearings - Method for non-destructive ultrasonic testing of bond
BS EN 2781:1998 Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness
BS ISO 4386-2:2012 Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
BS EN 13702:2018 Tracked Changes. Bitumen and bituminous binders. Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method
BS ISO 4386-1:2019 Tracked Changes. Plain bearings. Metallic multilayer plain bearings. Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
BS ISO 10270:1996 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
BS ISO 10771-1:2002 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Test method
BS EN ISO 10270:1996 Corrosion of metals and alloys. Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
BS EN ISO 10270:2008 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
PD ISO/TR 10771-2:2008 Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Rating method
BS EN 60811-202:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - General tests. Measurement of thickness of non-metallic sheath
19/30376110 DC BS EN ISO 19879. Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
BS ISO 4384-1:2012 Plain bearings. Hardness testing of bearing metals. Multilayer bearings materials
BS 4368-1:1998 Metallic tube connectors for fluid power and general use - Split collet compression fittings
BS 4368-1:1998+A1:2014 Metallic tube connectors for fluid power and general use - Split collet compression fittings
BS CWA 15846:2008 Measuring method for dynamic compactness and bearing capacity with SP-LFWD (small-plate light falling weight deflectometer)
BS ISO 10771-1:2015 Tracked Changes. Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Test method
BS EN ISO 19879:2021 Tracked Changes. Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
BS 5242-2:1983 Tubes for fluid power cylinder barrels. Specification for non-ferrous metallic tubes with specially finished bores
BS EN ISO 8434-1:1995 Metallic tube connections for fluid power and general use - 24 ° compression fittings
BS ISO 4384-2:2022 Tracked Changes. Plain bearings. Hardness testing of bearing metals. Solid materials
BS ISO 4386-1:2012 Plain bearings. Metallic multilayer plain bearings. Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
BS ISO 4384-1:2019 Tracked Changes. Plain bearings. Hardness testing of bearing metals. Multilayer bearings materials
BS IEC 62047-38:2021 Semiconductor devices. Micro-electromechanical devices. Test method for adhesion strength of metal powder paste in MEMS interconnection
BS EN 2243-6:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Determination of shear stress and shear strain
BS EN 60811-201:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - General tests. Measurement of insulation thickness
21/30426790 DC BS ISO 4384-2. Plain bearings. Hardness testing of bearing metals. Part 2. Solid materials
BS EN 14673:2006 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

ZA-SANS, Dynamic Viscosity of Metals

SANS 6035:2005 Apparent dynamic viscosity of wood adhesives
SANS 4522-2:1985 Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings Part 2: Adhesion tests
SANS 4386-2:2005 Plain bearings - Metallic multilayer plain bearings Part 2: Destructive testing of bond for bearing metal layer thicknesses >= 2mm
SANS 4384-2:2005 Plain bearings - Hardness testing of bearing metals Part 2: Solid materials

RO-ASRO, Dynamic Viscosity of Metals

SR 7293-1993 Metallic coatings. Methods for testing adhesion
STAS SR ISO 3104:1996 Petroleum products - Transparent and opaque liquids -Determination of kinematic viscosity and calculation of dynamic viscosity
STAS 9019-1985 DETERMINING OF THE CONVENTIONAL BOND STRENGHT OF THE METAL DEPOSITED FOR BRAZE WELDING
STAS 10418/2-1975 Metal cutting and pressing machines COMBINED SHEARS Specifications for geometric accuracy
STAS 11417-1986 Tests of metals TENSILE TESTING IN THE DIRECTION OF THE THICKNESS
SR ISO 4386-2:1982 Plain bearings. Metallic multilayer plain bearings. Part 2: Destructive testing of bond for bearing metal layer thicknesses ≥ 2 mm
SR ISO 4384-1:1994 Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials
SR ISO 4384-2:1994 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials
STAS 6679/5-1985 Metal cutting mncline-tools METHODE DE simuiLtanEous CHE-CKING STHHIGHTNESS AND PAHALLELISM OF THE MOY1NG BODY DIREC.TION OF MOVEMENT TO A l'l.ANIi OH AN AXIS

国家市场监督管理总局、中国国家标准化管理委员会, Dynamic Viscosity of Metals

GB/T 39289-2020 Determination of the adhesion strength—Plastic and metal
GB/T 37838-2019 Pulp—Determination of dynamic viscosity number in cupri-ethylenediamine(CED) solution
GB/T 37782-2019 Metallic materials—Indentation test—Determination of strength, hardness and stress-strain curve
GB/T 19934.1-2021 Hydraulic fluid power—Fatigue pressure testing of metal pressure-containing envelopes—Part 1: Test method
GB/T 18329.4-2021 Plain bearings—Metallic multilayer plain bearings—Part 4:Non-destructive ultrasonic transmission testing of bond of thickness greater than or equal to 0.3 mm

European Committee for Standardization (CEN), Dynamic Viscosity of Metals

EN 16896:2016 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
EN 2830:1993 Aerospace series; adhesion test for metallic coatings by shearing action
EN ISO 3104:2020 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020)
EN 2781:1998 Aerospace series - Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness
EN 2828:1993 Aerospace series; adhesion test for metallic coatings by burnishing
EN 13523-24:2004 Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking
EN 13523-24:2017 Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking
EN ISO 10270:2022 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022)
EN ISO 10270:2008 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:1995, including Cor 1:1997)
FprEN ISO 10270:2021 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO/FDIS 10270:2021)
EN 10002-1:2001 Metallic Materials - Tensile Testing - Part 1: Method of Test at Ambient Temperature

PL-PKN, Dynamic Viscosity of Metals

PN C89300-1969 Adhesive? to me?als Determinalion of shear s?rength
PN C89302-1969 Adhesives ?o me?ais Determination of ?ear ?trength
PN C89301-1959 Metal-bonding adhesives -- Determination of stripping strength
PN M55692-1986 Machines for plastic forming of metals Bottom ram automatic presses Testing of accuracy
PN BN 2211-10-1966
PN-EN ISO 19879-2021-08 E Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections (ISO 19879:2021)
PN H04337-1988 The strength tests of metals The antiseizability test on an Amsler machin?
PN M55551-06-1986 Metal cutting machin? tools ethods of measurement l" straightness and s?uareness l" a motion to a piane or to an axis
PN M55551-22-1987 Metal cutting machin? tools Methods of measurement of straightness and parallelism of a motion to the reference surface

IN-BIS, Dynamic Viscosity of Metals

IS 1448 Pt.25-1976

International Organization for Standardization (ISO), Dynamic Viscosity of Metals

ISO 14678:2005 Adhesives - Determination of resistance to flow (sagging)
ISO/DIS 18335 Petroleum products and related products — Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density – Method by constant pressure viscometer
ISO 814:1986 Rubber, vulcanized; Determination of adhesion to metal; Two-plate method
ISO 814:1974 Vulcanized rubber — Determination of adhesion to metal — Two-plate method
ISO 813:1974 Vulcanized rubber — Determination of adhesion to metal — One-plate method
ISO 813:1986 Rubber, vulcanized; Determination of adhesion to metal; One-plate method
ISO 5603:2007 Rubber, vulcanized - Determination of adhesion to wire cord
ISO 3104:1976 Petroleum products; Transparent and opaque liquids; Determination of kinematic viscosity and calculation of dynamic viscosity
ISO/DIS 3104 Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
ISO/FDIS 3104:2023 Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
ISO 3104:2023 Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
ISO 4386-1:1982 Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond for bearing metal layer thicknesses equal to or greater than 2 mm
ISO 3104:1994 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
ISO 814:1996 Rubber, vulcanized - Determination of adhesion to metal - Two-plate method
ISO 4386-1:2019 Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
ISO 4386-2:2019 Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
ISO 14317:2006 Sintered metal materials excluding hardmetals - Determination of compressive yield strength
ISO 14317:2015 Sintered metal materials excluding hardmetals - Determination of compressive yield strength
ISO 4522-2:1985 Metallic coatings; Test methods for electrodeposited silver and silver alloy coatings; Part 2: Adhesion tests
ISO 10270:1995 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
ISO 4386-2:1982 Plain bearings; Metallic multilayer plain bearings; Part 2 : destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
ISO 4386-2:2012 Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses 2 mm
ISO/TR 18124:2006 Plastics piping systems - Multilayer M (metal) pipes - Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
ISO/TR 10771-2:2008 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 2: Rating methods
ISO/CD TR 15263 Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing
ISO 3923-3:1986 Metallic powders; Determination of apparent density; Part 3 : Oscillating funnel method
ISO 4680:2022 Corrosion of metals and alloys — Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures
ISO 10771-1:2002 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method
ISO 10771-1:2015 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method
ISO 7146-1:2019 Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 1: General
ISO 4384-1:1982 Plain bearings; Hardness testing of bearing metals; Part 1 : Compound materials
ISO 4384-2:2022 Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials
ISO 9623:1997 PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure - Design lengths and size of threads - Metric series
ISO 4384-1:2019 Plain bearings — Hardness testing of bearing metals — Part 1: Multilayer bearings materials
ISO 4384-1:2012 Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials
ISO/DTS 19096 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO/TS 19096:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO 7905-4:1995 Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material
ISO 7905-3:1995 Plain bearings - Bearing fatigue - Part 3: Test on plain strips of a metallic multilayer bearing material
ISO/CD 8434-3 Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
ISO 7146-2:2019 Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 2: Cavitation erosion and its countermeasures
ISO 7905-2:1995 Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material

Society of Automotive Engineers (SAE), Dynamic Viscosity of Metals

SAE J1523-2012 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives
SAE J190-1998 Power Steering Pressure Hose Wire Braid
SAE J2658-2003 Metallic Tube Conductor Assemblies for Fluid Power and General UseTest Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J1523-1993 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives, Recommended Practice
SAE J514/1-2022 Metallic Connections for Fluid Power and General Use - Part 1: 37 Degree Flared Fittings
SAE J1644-1998 Metallic Tube Connections for Fluid Power and General Use - Test Methods for Threaded Hydraulic Fluid Power Connectors
SAE AS1339F-2003 Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 Degrees Lightweight, Hydraulic and Pneumatic
SAE TS128-6-2006 TS128 "All Metal" Self-Locking Nuts (UNJ Threads) 1100 MPa (160,000 lbf/in²) Minimum Tensile Strength at Room Temperature
SAE TS128-7-2019 TS128 "All-Metal" Self-Locking Nuts (UNJ Threads) 1100 MPa (160,000 lbf/in²) Minimum Tensile Strength at Room Temperature

SAE - SAE International, Dynamic Viscosity of Metals

SAE J1523-2021 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives
SAE J1523-1985 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives@ Recommended Practice
SAE J2658-2010 Metallic Tube Conductor Assemblies for Fluid Power and General UseTest Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J2658-2013 Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use - Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J1644-1993 Metallic Tube Connections for Fluid Power and General Use-Test Methods for Threaded Hydraulic Fluid Power Connectors
SAE J1644-2007 Metallic Tube Connections for Fluid Power and General Use-Test Methods for Threaded Hydraulic Fluid Power Connectors

BELST, Dynamic Viscosity of Metals

STB 2188-2011 Bitumen and bituminous binder. Method for determination of dynamic viscosity

Korean Agency for Technology and Standards (KATS), Dynamic Viscosity of Metals

KS M ISO 814:2009 Rubber, vulcanized or thermoplastic-Determination of adhesion to metal-Two-plate method
KS M ISO 814:2014 Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method
KS B ISO 4386-2:2022 Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
KS B ISO 4386-2:2016 Plane bearings－Metallic multilayer plain bearings－Part 2：Destructive testing of bond for bearing metal layer thicknesses ≥ 2 mm
KS D ISO 4525:2012 Metallic coatings-Electroplated coatings of nickel plus chromium on plastics materials
KS D ISO 4525:2013 Metallic coatings－Electroplated coatings of nickel plus chromium on plastics materials
KS B ISO 4386-2-2016(2021) Plane bearings－Metallic multilayer plain bearings－Part 2：Destructive testing of bond for bearing metal layer thicknesses ≥ 2 mm
KS B ISO 4386-1:2021 Plain bearings — Metallic multilayer plain bearings —Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0.5 mm
KS D ISO 4524-5:2002 Test methods for electrodeposited gold and gold alloy coatings-Adhesion tests
KS D ISO 4524-5:2013 Test methods for electrodeposited gold and gold alloy coatings-Adhesion tests
KS M ISO 3104:2008 Petroleum products－Transparent and opaque liquids－Determination
KS D ISO 14317:2012 Sintered metal materials excluding hardmetals-Determination of compressive yield strength
KS D ISO 10270:2003 Corrosion of metals and alloys-Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
KS B ISO 4386-2:2005 Plane bearings-Metallic multilayer plain bearings-Part 2:Destructive testing of bond for bearing metal layer thicknesses ≥ 2 mm
KS D ISO 10270:2016 Corrosion of metals and alloys－Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
KS B ISO 9974-3-2004(2009) Connections for general use and fluid power－Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing－Part 3：Stud ends with metal-to-metal sealing (type B)
KS B ISO 8434-5-2002(2012) Metallic tube connections for fluid power and general use－Part 5 : Test methods for threaded hydraulic fluid power connections
KS B ISO 18437-4:2019 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method
KS B ISO 10771-1:2006 Hydraulic fluid power-Fatigue pressure testing of metal pressure-containing envelopes-Part 1:Test method
KS B ISO 10771-1:2013 Hydraulic fluid power－Fatigue pressure testing of metal pressure-containing envelopes－Part 1：Test method
KS B ISO 18275:2019 Welding consumables — Covered electrodes for manual metal arc welding of high-strength steels — Classification
KS B ISO 8434-1:2002 Metallic tube connections for fluid power and general use-Part 1 : 24° compression fittings
KS B ISO 9974-1-2004(2009) Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal to metal sealing - Part 1 Threaded ports
KS B ISO 7905-2:2007 Plain bearings－Bearing fatigue－Part 2：Test with a cylindrical specimen of a metallic bearing material

Danish Standards Foundation, Dynamic Viscosity of Metals

DS/ISO 814:1988 Rubber, vulcanized. Determination of adhesion to metal. Two-plate method
DS/EN ISO 3104/AC:2000 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
DS/EN ISO 3104:1997 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
DS/EN ISO 8434-1:2007 Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors
DS/EN ISO 8434-1:2009 Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors
DS/EN ISO 10270:2009 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
DS/ISO 19879:2021 Metallic tube connections for fluid power and general use – Test methods for hydraulic fluid power connections
DS/EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
DS/ISO 18437-4:2011 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 4: Dynamic stiffness method
DS/EN ISO 19879:2021 Metallic tube connections for fluid power and general use – Test methods for hydraulic fluid power connections (ISO 19879:2021)
DS/EN 2781:1999 Aerospace series - Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness
DS/EN ISO 9974-3:2001 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B)
DS/EN 14673+A1:2010 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
DS/EN ISO 1179-4:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
DS/EN 2243-6:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain

KR-KS, Dynamic Viscosity of Metals

KS B ISO 4386-2-2016 Plane bearings－Metallic multilayer plain bearings－Part 2：Destructive testing of bond for bearing metal layer thicknesses ≥ 2 mm
KS B ISO 4386-2-2022 Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
KS B ISO 4386-1-2021 Plain bearings — Metallic multilayer plain bearings —Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0.5 mm
KS B ISO 4386-1-2016 Plain bearings－Metallic multilayer plain bearings－Part 1：Non－destructive ultrasonic testing of bond
KS D ISO 10270-2016 Corrosion of metals and alloys－Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
KS B ISO 18437-4-2019 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method
KS B ISO 4384-2-2023 Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials
KS B ISO 18275-2019 Welding consumables — Covered electrodes for manual metal arc welding of high-strength steels — Classification
KS B ISO 4384-1-2023 Plain bearings — Hardness testing of bearing metals — Part 1: Multilayer bearings materials

PH-BPS, Dynamic Viscosity of Metals

PNS ISO 4386-2:2021 Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
PNS ISO 7146-1:2021 Plain bearings - Appearance and characterization of damage to metallic hydrodynamic bearings - Part 1: General
PNS ISO 4384-1:2021 Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials
PNS ISO 7146-2:2021 Plain bearings - Appearance and characterization of damage to metallic hydrodynamic bearings - Part 2: Cavitation erosion and its countermeasures

TH-TISI, Dynamic Viscosity of Metals

TIS 1801-1999 Petroleum products.transparent and opaque liquids determination of kinematic viscosity and calculation of dynamic viscosity

IT-UNI, Dynamic Viscosity of Metals

UNI EN ISO 3104:2021 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
UNI EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
UNI 1284-1971

ES-UNE, Dynamic Viscosity of Metals

UNE-EN ISO 3104:2021 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020)
UNE-EN 13702:2019 Bitumen and bituminous binders - Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method
UNE-EN 13523-17:2020 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
UNE-EN ISO 19879:2022 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
UNE-EN 60811-202:2012/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
UNE-EN ISO 8434-1:2020 Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO 8434-1:2018, Corrected version 2018-10)

Association Francaise de Normalisation, Dynamic Viscosity of Metals

NF EN ISO 3104:2020 Produits pétroliers - Liquides opaques et transparents - Détermination de la viscosité cinématique et calcul de la viscosité dynamique
NF A89-421:1979 Braze welding filler metals. Determination of the conventional tensile strengh of the bond to steel, cast iron and other metals.
NF T66-056:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus.
NF A91-095-5:1987 Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 5 : adhesion tests.
NF T46-059*NF ISO 814:2017 Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method
FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
NF E48-064-1*NF EN ISO 8434-1:2018 Metallic tube connections for fluid power and general use - Part 1 : 24 degree cone connectors
NF A05-401:2008 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors.
NF E15-100:2000 Industrial pressure gauges and thermometers - Metallic indicator pressure gauges and thermometers - Pressure gauges and thermometers with control function
NF E15-100:1988 INDUSTRIAL PRESSURE GAUGES AND THERMOMETERS. METALLIC INDICATOR PRESSURE GAUGES AND THERMOMETERS. PRESSURE GAUGES AND THERMOMETERS WITH CONTROL FUNCTION.
NF A05-401*NF EN ISO 10270:2022 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
NF A91-092-2:1987 Metallic coatings. Test methods for electrodeposited silver and silver alloy coatings. Part 2 : adhesion tests.
NF R12-617*NF ISO 6315:1988 Road vehicles. Brake linings. Seizure to ferrous mating surface due to corrosion. Test procedure.
NF E48-075:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
NF E48-064:1998 Metallic tube connections for fluid power and general use. Part 1 : 24 degrees compression fittings.
NF E48-075:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections.
NF EN 14399-2:2015 Boulonnerie de construction métallique à haute résistance apte à la précontrainte - Partie 2 : aptitude à l'emploi pour la mise en précontrainte
NF E48-064-1:2007 Metallic tube connections for fluid power and general use - Part 1 : 24 degree cone connectors.
NF E48-064-6*NF ISO 8434-6:2009 Metallic tube connections for fluid power and general use - Part 6 : 60o cone connectors with or without O-ring
NF E48-065-3*NF EN ISO 9974-3:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3 : stud ends with metal-to-metal sealing (type B)
NF ISO 6315:1988 Véhicules routiers - Garnitures de freins - Adhérence de la surface ferreuse due à la corrosion - Méthode d'essai.
NF L17-300-6*NF EN 2243-6:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6 : determination of shear stress and shear strain.
NF EN 2243-6:2006 Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 6 : détermination de la contrainte et de la déformation de cisaillement
NF E29-763:1991 VALVES AND GAS CYLINDERS. METHOD OF TEST FOR DETERMINATION OF THE SPONTANEOUS IGNITION TEMPERATURE OF NON-METALLIC MATERIALS IN PRESSURIZED GASEOUS OXYGEN. BOMB TESTS. VALVES AND GAS CYLINDERS. METHOD OF TEST FOR DETERMINATION OF THE SPONTANEOUS IGNITION
NF EN 14399-10:2018 Boulonnerie de construction métallique à haute résistance apte à la précontrainte - Partie 10 : système HRC - Boulons (vis + écrou + rondelle) à précontrainte calibrée

Japanese Industrial Standards Committee (JISC), Dynamic Viscosity of Metals

JIS K 6256-3:2006 Rubber, vulcanized or thermoplastic -- Determination of adhesion test -- Part 3: Adhesion to metal -- Two-plate method
JIS K 6848-2:1999 Adhesives -- Testing methods of bonding strength of adhesives -- Part 2: Guidelines for the surface preparation of metals
JIS K 6848-2:2016 Adhesives -- Testing methods of bonding strength of adhesives -- Part 2: Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
JIS K 6848-4:1999 Adhesives -- Testing methods of bonding strength of adhesives -- Part 4: Guidelines for the surface preparation of adherends excluded metals and plastics
JIS B 2351-1 ERRATUM 1:2000 Metallic tube connections for fluid power and general use -- Part 1: 24 degree SIGN compression fittings (Erratum 1)
JIS B 2351-1 ERRATUM 2:2002 Metallic tube connections for fluid power and general use -- Part 1: 24 degree SIGN compression fittings (Erratum 2)
JIS B 2351-5:2000 Metallic tube connections for fluid power and general use -- Part 5: Test methods for threaded hydraulic fluid power connections
JIS B 2351-5:2012 Metallic tube connections for fluid power and general use -- Part 5: Test methods for threaded hydraulic fluid power connections
JIS K 7244-10:2005 Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer

GM North America, Dynamic Viscosity of Metals

GM GM9157P-1988 Bond Strength of Metallized Mylar Strings, Belts and Moldings

RU-GOST R, Dynamic Viscosity of Metals

GOST 29202-1991 Plain bearings. Hardness testing of bearing metals. Solid materials
GOST R 55806-2013 Non-destructive testing. Ultrasound measurement of bonding strength of layers in bimetal. General requirements
GOST R 57173-2016 Calculation and strength testing. Methods of mechanical testing of metals. Test for stress relaxation of metals and alloys at a compression. General requirements
GOST 29212-1991 Plain bearings. Hardness testing of bearing metalls. Compound materials
GOST ISO 814-2013 Rubber vulcanized or thermoplastic. Determination of adhesion to metal by two-plate method
GOST 33155-2014 Engine oils. Method for determination of yield stress and apparent viscosity at low temperature
GOST 26007-1983 Design, calculation and strength testing. Methods of mechanical testing of metals. Methods for stress relaxation testing
GOST R ISO 18437-6-2021 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 6. Method of time-temperature superposition

SE-SIS, Dynamic Viscosity of Metals

SIS SS-ISO 2819:1981 Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion
SIS SS 11 03 11-1987 Metallic materials - Calibration of force proving instruments used for the verifi-cation of uniaxial testing machines

Professional Standard - Petroleum, Dynamic Viscosity of Metals

SY/T 0041-1997 Test method for apparent shear strength of pipeline coatings to metal

HU-MSZT, Dynamic Viscosity of Metals

YU-JUS, Dynamic Viscosity of Metals

JUS C.A2.039-1987 Physical tests of metafs. ?etermination of apparent density of metallic povvders. Oscillating funnel method
JUS B.H8.022-1981 Testing of petroleum products — Determination ofkinematic viscosity of transparent and opaque liquids andcalculation ofdynamic viscosity
JUS C.A4.013-1993 Mechanical testing of metals - Conversion of hardness values steel to tensile strength values

ESDU - Engineering Sciences Data Unit, Dynamic Viscosity of Metals

ESDU 73017 B-1977 Reynolds number@ speed of sound@ dynamic viscosity@ kinetic pressure and total pressure coefficient in air.
ESDU 73017 C-2013 Reynolds number@ speed of sound@ dynamic viscosity@ kinetic pressure and total pressure coefficient in air

United States Navy, Dynamic Viscosity of Metals

NAVY QPL-17563-QPD-2011 IMPREGNANTS FOR CAST OR POWER METAL COMPONENTS
NAVY QPL-17563-2012 IMPREGNANTS FOR CAST OR POWER METAL COMPONENTS
NAVY QPL-17563-2013 IMPREGNANTS FOR CAST OR POWER METAL COMPONENTS
NAVY W-C-571 C-1981 CONDUIT AND FITTINGS, NONMETAL, RIGID; (ASBESTOS-CEMENT OR FIRE CLAY CEMENT), (FOR ELECTRICAL PURPOSES)

American Society of Mechanical Engineers (ASME), Dynamic Viscosity of Metals

ASME STP-PT-073-2014 STRESS INTENSITY FACTOR AND K-FACTOR ALIGNMENT FOR METALLIC PIPES
ASME 2255-2001 Minimum Metal Temperatures of PMB Pressure Vessels During Hydrostatic Testing Section I

Association of German Mechanical Engineers, Dynamic Viscosity of Metals

DVS 3101-1-1999

Professional Standard - Railway, Dynamic Viscosity of Metals

TB/T 2959-1999 Ultrasonic non-destructive testing of adhesive layers of metallic multilayer sliding bearings

Standard Association of Australia （SAA）, Dynamic Viscosity of Metals

AS 2341.4:2023 Methods of testing bitumen and related roadmaking products, Method 4: Determination of dynamic viscosity by rotational viscometer
AS 2341.4:1994 Methods of testing bitumen and related roadmaking products - Determination of dynamic viscosity by rotational viscometer
AS 2313.1.11:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Adhesion - Resistance to dynamic shear load at ambient temperature
AS 1937.9:1991 Methods of test for sealers and adhesives for automotive purposes - Determination of shear strength of metal-to-metal adhesive

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Dynamic Viscosity of Metals

GB/T 37782-2019(英文版) "Metallic materials—Indentation test—Determination of strength,hardness and stressstrain curve"
GB/T 6524-2003 Metallic powders-Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
GB/T 11211-2009 Determination of Adhesion Strength of Vulcanized or Thermoplastic Rubber to Metal Two-Plate Method
GB/T 11211-2009"> Determination of Adhesion Strength of Vulcanized or Thermoplastic Rubber to Metal Two-Plate Method
GB/T 11211-2009 Determination of Adhesion Strength of Vulcanized or Thermoplastic Rubber to Metal Two-Plate Method
GB/Z 41506-2022 Hydraulic fluid power—Fatigue pressure testing of metal pressure-containing envelopes—Rating methods
GB/T 5061-1998 Metallic powders--Determination of apparent density Part 3: Oscillating funnel method
GB/T 18329.1-2001 Plain bearings--Non-destructive ultrasonic testing of bond for metallic multilayer plain bearings
GB/T 19934.1-2005 Hydraulic fluid power.Fatigue pressure testing of metal pressure-containing envelopes.Part 1:Test method

BE-NBN, Dynamic Viscosity of Metals

NBN-EN 26802-1993 Rubber and plastics hose and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing (ISO 6802:1991)

US-HI, Dynamic Viscosity of Metals

HI 9.6.7-2010 Effects of Liquid Viscosity on Rotodynamic (Centrifugal and Vertical) Pump Performance

IPC - Association Connecting Electronics Industries, Dynamic Viscosity of Metals

IPC TM-650 2.6.21B-2011 Service Temperature of Metal-Clad Flexible Laminate@ Cover Material and Adhesive Bonding Films

Aerospace Industries Association/ANSI Aerospace Standards, Dynamic Viscosity of Metals

AIA/NAS NASM21081-1999 Nut, Self-Locking, Plate, Corner, Non-Metallic Insert, Steel, 125 KSI Ftu, 250 Degrees F
AIA/NAS NASM21082-1999 Nut, Self-Locking, Plate, One Lug, Floating, Non-Metallic Insert, Steel 125 KSI Ftu, 250 Degrees F
AIA/NAS NASM21080-1998 Nut, Self-Locking, Plate, One Lug, Non-Metallic Insert, Steel, 125 KSI Ftu, 250 Degrees F
AIA/NAS NASM21083-2004 Nut, Self-Locking, Hexagon, Non-Metallic Insert, Low Height, 250 Degrees F Rev 1
AIA/NAS NASM21077-1999 Nut, Self-Locking, Plate, Two Lug, Floating, Non-Metallic Insert, Steel 125 KSI Ftu, 250 Degrees F
AIA/NAS NASM21078-1998 Nut, Self-Locking, Plate, Two Lug, Non-Metallic Insert, Steel, 125 KSI Ftu, 250 Degrees F
AIA/NAS NASM21079-1998 Nut, Self-Locking, Gang Channel, Non-Metallic Insert, 125 KSI Ftu, 250 Degrees F
AIA/NAS NASM21050-1999 Nut, Self-Locking, Plate, Two Lug, 100 Degree CSK, Low Height, Cres, 125 KSI Ftu, 450 Degrees and 800 Degrees F
AIA/NAS NASM21086-1998 Nut, Self-Locking, Plate, Side, by Side, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450 Degrees F
AIA/NAS NASM21051-2002 Nut, Self-Locking, Plate, One Lug, Low Height, Steel, 125 KSI Ftu, 450 Degrees F Rev 1
AIA/NAS NASM20501-1999 Nut, Self-Locking, Plate, Two Lug, 1200 Degrees F, 125 KSI Ftu
AIA/NAS NASM21049-2002 Nut, Self-Locking, Plate, Two Lug, 100 Degree CSK Low Height, Steel, 125 KSI Ftu, 450 Degrees F Rev 1
AIA/NAS NASM21055-1999 Nut, Self-Locking, Plate, Corner, Low Height, Steel, 125 KSI Ftu, 450 Degrees F
AIA/NAS NASM21047-2002 Nut, Self-Locking, Plate, Two-Lug, Low Height, Steel, 125 KSI Ftu, 450 Degrees F Rev 2
AIA/NAS NASM21048-1999 Nut, Self-Locking, Plate, Two Lug, Low Height, Cres, 125 KSI Ftu, 450 Degrees and 800 Degrees F
AIA/NAS NASM21052-1999 Nut, Self-Locking, Plate, One Lug, Low Height, Cres, 125 KSI Ftu, 450 Degrees and 800 Degrees F
AIA/NAS NASM21054-1999 Nut, Self-Locking, Plate, One Lug, 100 Degree CSK, Low Height, Cres, 125 KSI Ftu, 450 Deg.& 800 Deg F.
AIA/NAS NASM21056-1999 Nut, Self-Locking, Plate, Corner, Low Height, Cres, 125KSI Ftu, 450 Degrees F& 800 Degrees F
AIA/NAS NASM21058-1999 Nut, Self-Locking, Plate, Corner, 100 Degree CSK, Low Height, CRES, 125 KSI Ftu, 450 Degrees F and 800 Degrees F
AIA/NAS NASM21069-1998 Nuts, Self-Locking, Plate, Two-Lug, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450 Degrees F
AIA/NAS NASM21071-1999 Nut, Self-Locking, Plate, One-Lug, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450 Degrees F
AIA/NAS NASM21074-1999 Nut, Self-Locking, Plate, Corner, Reduced Rivet Spacing, Low Height, CRES, 125 KSI Ftu, 450 Degrees F& 800 Degrees F
AIA/NAS NASM21062-1999 Nut, Self-Locking, Plate, One Lug, Floating, Low Height, Cres, 125 KSI Ftu, 450 Degrees F& 800 Degrees F
AIA/NAS NASM21073-2001 Nut, Self-Locking, Plate, Corner, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450 Degrees F Rev 1
AIA/NAS NASM21060-1999 Nut, Self-Locking, Plate, Two Lug, Floating, Low Height, CRES, 125 KSI Ftu, 450 Degrees F and 800 Degrees F
AIA/NAS NASM21224-1999 Nut, Self-Locking, Castellated, Hexagon Counterbored, Assembled Washer, 250 Degrees F Non-Metallic Insert (for Self-Retaining Bolts)

AENOR, Dynamic Viscosity of Metals

UNE-EN 2781:1999 AEROSPACE SERIES. NON-METALLIC MATERIALS. STRUCTURAL ADHESIVES. TEST METHODS. DETERMINATION OF THE PRIMER THICKNESS.
UNE-EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
UNE-EN ISO 8434-1:2008 Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007)
UNE-EN ISO 9974-3:2001 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 261 THREADS WITH ELASTOMERIC OR METAL-TO METAL SEALING - PART 3: STUD ENDS WITH METAL-TO-METAL SEALING (TYPE B). (ISO 9974-3:1996).
UNE-EN ISO 10270:2009 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:1995 including Cor 1:1997)
UNE-EN ISO 1179-4:2009 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
UNE-EN 2243-6:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain

Lithuanian Standards Office , Dynamic Viscosity of Metals

LST EN ISO 19879:2011 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
LST EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
LST EN ISO 8434-1:2007 Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007)
LST EN ISO 8434-1:2007/AC:2009 Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007)
LST EN 2781-2001 Aerospace series - Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness
LST EN ISO 9974-3:2001 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)
LST EN ISO 10270:2008 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:1995, including Cor 1:1997)
LST EN 14673-2006+A1-2010 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
LST EN ISO 1179-4:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
LST EN 2243-6-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain

AT-ON, Dynamic Viscosity of Metals

OENORM EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)

Group Standards of the People's Republic of China, Dynamic Viscosity of Metals

T/CSTM 00278-2021 Ring compression test method for strength and stress-strain relationship of metallic materials
T/GAMA 30-2023

NO-SN, Dynamic Viscosity of Metals

NS 152-1973 Piping - Pressure and temperature ratings for pipeline components of ferrous materials

Professional Standard - Petrochemical Industry, Dynamic Viscosity of Metals

SH/T 0618-1995 Dynamic Viscometry of Lubricating Oils under High Shear Conditions (Levan Felt Method)

FI-SFS, Dynamic Viscosity of Metals

SFS 5457-1988

GOSTR, Dynamic Viscosity of Metals

GOST R 58177-2018 United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements

Aerospace, Security and Defence Industries Association of Europe (ASD), Dynamic Viscosity of Metals

ASD-STAN PREN 2243-4-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 4: Metal-Honeycomb Core Flatwise Tensile Test (Edition P 1)
ASD-STAN PREN 2781-1997 Aerospace Series Non-Metallic Materials Structural Adhesives Test Methods Determination of the Primer Thickness
ASD-STAN PREN 2667-2-1996 Aerospace Series Non-Metallic Materials Foaming Structural Adhesives Test Methods Part 2: Compressive Tube Shear (Edition P 1)

未注明发布机构, Dynamic Viscosity of Metals

BS 7268:1990(1999) Method for Determination of fatigue pressure rating of metal pressure containing envelopes in hydraulic fluid power systems
BS EN ISO 1179-4:2008(2010) Connections for general use and fluid power — Ports and stud ends with ISO 228 - 1 threads with elastomeric or metal - to - metal sealing — Part 4 : Stud ends for general use only with metal - to - metal sealing (type B)

American National Standards Institute （ANSI), Dynamic Viscosity of Metals

ANSI E1.16-2002 Entertainment Technology - Configuration Standard for Metal-Halide Ballast Power Cables

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Dynamic Viscosity of Metals

GB/T 1479.3-2017 Metallic powders－Determination of apparent density－Part 3: Oscillating funnel method

International Electrotechnical Commission (IEC), Dynamic Viscosity of Metals

IEC 62047-38:2021 Semiconductor devices - Micro-electromechanical devices - Part 38: Test method for adhesion strength of metal powder paste in MEMS interconnection