ZH
RU
ES

Concentrated series

Concentrated series, Total:386 items.

In the international standard classification, Concentrated series involves: Beverages, Medical sciences and health care facilities in general, Protection against fire, Environmental testing, Medical equipment, Hospital equipment, Structure and structure elements, Document imaging applications, Aircraft and space vehicles in general, On-board equipment and instruments, Fluid power systems, Electricity. Magnetism. Electrical and magnetic measurements, Fasteners for aerospace construction, Fasteners, Data storage devices, Pharmaceutics, Information sciences. Publishing, Aerospace fluid systems and components, Materials for aerospace construction, Iron and steel products, Aerospace electric equipment and systems, Energy and heat transfer engineering in general, Pipeline components and pipelines, Plastics, Lubricants, industrial oils and related products, Wood technology processes, Electrical accessories, Paints and varnishes, Components for aerospace construction, Sensory analysis, Rotating machinery, Fruits. Vegetables.

Group Standards of the People's Republic of China, Concentrated series

T/GZSX 055.1-2019 Prickly pear series products Prickly pear concentrated juice
T/CAME 48-2022 Centre concentrate delivery system for haemodialysis
T/CEEIA 496-2021 Technical specifications for TYSP series variable frequency adjustable speed three-phase permanent magnet synchronous motors for compressors

(U.S.) Ford Automotive Standards, Concentrated series

FORD M3C99-B-1991 SOLUBLE OIL CONCENTRATE Shown on M3C99-A
FORD WSS-M99B188-A2-2009 ACETAL COPOLYMER (POM) COLOR PIGMENT CONCENTRATE, MEDIUM GRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99B188-A3-2009 ACETAL COPOLYMER (POM) COLOR PIGMENT CONCENTRATE, LIGHT BLUE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99B188-A4-2009 ACETAL COPOLYMER (POM) COLOR PIGMENT CONCENTRATE, LIGHT GREEN ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99B188-A5-2009 ACETAL COPOLYMER (POM) COLOR PIGMENT CONCENTRATE, BRIGHT YELLOW ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M97B44-A-2002 COOLANT, LONG LIFE, CONCENTRATE, FOR SYSTEM CONTAINING CAST AND WROUGHT ALUMINUM ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M97B54-A-2007 COOLANT, LONG LIFE, CONCENTRATE, FOR SYSTEM CONTAINING CAST AND WROUGHT ALUMINUM - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSE-M97B44-B-2009 COOLANT, CONCENTRATE, EXTENDED LIFE, FOR SYSTEMS CONTAINING CAST AND WROUGHT ALUMINUM ***TO BE USED WITH FORD WSS-M99P1111-A***

American Society for Testing and Materials (ASTM), Concentrated series

ASTM G128-95 Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
ASTM G128-02(2008) Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
ASTM E679-04 Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
ASTM E679-91(1997) Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
ASTM E679-04(2011) Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
ASTM E679-19 Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits

International Organization for Standardization (ISO), Concentrated series

ISO 10083:2006 Oxygen concentrator supply systems for use with medical gas pipeline systems
ISO 10083:1992 Oxygen concentrators for use with medical gas pipeline systems
ISO 15779:2011 Condensed aerosol fire extinguishing systems - Requirements and test methods for components and system design, installation and maintenance - General requirements
ISO 8637:2010 Cardiovascular implants and extracorporeal systems - Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
ISO/DIS 8637-1 Extracorporeal systems for blood purification — Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
ISO/CD 8637-1 Extracorporeal systems for blood purification — Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
ISO 3191:1985 Aerospace; Self-locking, fixed, single-lug anchor nuts, reduced series, with counterbore, strength classification 1 100 MPa and maximum operating temperature 235 degrees C
ISO 3225:1985 Aerospace; Self-locking, fixed, two lug anchor nuts, reduced series, with counterbore, strength classification 1 100 MPa and maximum operating temperature 235 degrees C
ISO 8637-1:2017 Extracorporeal systems for blood purification - Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators

VN-TCVN, Concentrated series

TCVN 7742-2007 Oxygen concentrator supply systems for use with medical gas pipeline systems

North Atlantic Treaty Organization Standards Agency, Concentrated series

STANAG 3865-1986 PHYSIOLOGICAL REQUIREMENTS FOR AIRCRAFT MOLECULAR SIEVE OXYGEN CONCENTRATING SYSTEMS

Taiwan Provincial Standard of the People's Republic of China, Concentrated series

CNS 15004-2006 Oxygen concentrators for use with medical gas pipeline systems

British Standards Institution (BSI), Concentrated series

BS 7634:1993 Specification for oxygen concentrators for use with medical gas pipeline systems
BS N 6:1998 Specification for aeromedical portable oxygen concentrator systems - General requirements
BS PD CEN/TR 15276-2:2009 Fixed firefighting systems — Condensed aerosol extinguishing systems Part 2: Design, installation and maintenance
18/30380447 DC BS EN 6069. Aerospace series. Rivet, 100° reduced flush head, close tolerance. Inch series
BS EN 6069:2022 Tracked Changes. Aerospace series. Rivet, 100° reduced flush head, close tolerance. Inch series
BS PD CEN/TR 15276-1:2009 Fixed firefighting systems — Condensed aerosol extinguishing systems Part 1: Requirements and test methods for components
BS EN 4840-001:2018 Aerospace series. Heat shrinkable moulded shapes - Technical specification
BS EN 2795:2018 Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 50 IRHD
BS EN 2796:2018 Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 60 IRHD
BS EN 2798:2019 Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 80 IRHD
BS EN 2799:2018 Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 90 IRHD
BS EN 3712:2007 Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2, lubricated - Classification: 1100 MPa (at ambient temperature)/235°C
BS EN 3712:2008 Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2, lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C
BS EN ISO 8637-1:2020 Extracorporeal systems for blood purification. Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
BS EN 3475-402:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Shrinkage and delamination
BS ISO 6743-3:2003 Lubricants, industrial oils and related products (class L). Classification - Family D (Compressors)
16/30340983 DC BS EN 2797. Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 70 IRHD
BS EN ISO 8637:2014 Cardiovascular implants and extracorporeal systems. Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
12/30254337 DC BS ISO 8637 AMD1. Cardiovascular implants and extracorporeal systems. Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
BS EN 2825:2011 Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of smoke density
BS EN 4191:2001 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced, bulkhead branch, long
BS A 335:1999 Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimen...
BS EN 4708-001:2014 Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification. Technical specification
BS EN 6038:2015 Aerospace series. Fibre reinforced plastics. Test method. Determination of the compression strength after impact
23/30470631 DC BS ISO 8637-1. Extracorporeal systems for blood purification - Part 1. Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators

Professional Standard - Medicine, Concentrated series

YY/T 1468-2016 Oxygen concentrator supply systems for use with medical gas pipeline systems
YY 1468-2016 Oxygen Concentrator Gas Supply Systems for Medical Gas Piping Systems

CU-NC, Concentrated series

NC 38-06-02-1987 Food Sanitary Standards System. Food Enrichment General Sanitary Requirements

German Institute for Standardization, Concentrated series

DIN ISO 10083:2008 Oxygen concentrator supply systems for use with medical gas pipeline systems (ISO 10083:2006);English version of DIN ISO 10083:2008-12
DIN EN 2575:1989 Aerospace series; filming of documents; 16 mm microfilm; german version EN 2575:1988
DIN EN 6069:2011-02 Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series; German and English version EN 6069:2009 / Note: To be replaced by DIN EN 6069 (2018-12), DIN EN 6069 (2020-09).
DIN EN 2499:1989-09 Aerospace series; computer output microfilm (COM); A6 microfiche; german version EN 2499:1987
DIN EN 2499:1989 Aerospace series; computer output microfilm (COM); A6 microfiche; german version EN 2499:1987
DIN EN 2484:1989-10 Aerospace series; microfilming of drawings; aperture card for 35 mm microfilm; german version EN 2484:1988
DIN EN 2547:1989-09 Aerospace series; filming of documents; microfilm 105 mm (microfiche A6); german version EN 2547:1987
DIN-Fachbericht CEN/TR 15276-2:2009 Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2: Design, installation and maintenance; German version CEN/TR 15276-2:2009
DIN EN 2575:1989-09 Aerospace series; filming of documents; 16 mm microfilm; german version EN 2575:1988
DIN-Fachbericht CEN/TR 15276-1:2009 Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components; German version CEN/TR 15276-1:2009
DIN EN 3750:2010-05 Aerospace series - Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 3...
DIN 3870:2001-09 Non-soldering and soldering compression fittings - Union nuts series LL
DIN EN 2856:2007-01 Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore - Classification: 1100 MPa/235 °C; German and English version EN 2856:2006
DIN 65259:1989-04 Aerospace; rivets, 100° countersunk head, reduced, aluminium and aluminium alloys; metric series
DIN EN 6069:2011 Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series; German and English version EN 6069:2009
DIN EN 4126:2010-05 Aerospace series - Nuts, anchor, self-locking, floating, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature) / 315 °C; German and English ver...
DIN EN 2795:2018-05 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD; German and English version EN 2795:2018
DIN EN 2799:2018-09 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD; German and English version EN 2799:2018
DIN EN 2796:2018-11 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD; German and English version EN 2796:2018
DIN EN 2798:2019-08 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD; German and English version EN 2798:2019
DIN EN 2795:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD; German and English version EN 2795:2018
DIN EN 2796:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD; German and English version EN 2796:2018
DIN EN 2798:2019 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD; German and English version EN 2798:2019
DIN EN 2799:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD; German and English version EN 2799:2018
DIN EN 4840-001:2018 Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification; German and English version EN 4840-001:2018
DIN EN 4125:2010-05 Aerospace serie - Nuts, anchor, self-locking, fixed, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS <(Index)2> lubricated - Classification: 900 MPa (at ambient temperature) / 315 °C; German and English versio...
DIN 68100:2010-07 Tolerance system for wood working and wood processing - Concepts, series of tolerances, shrinkage and swelling
DIN EN 4840-001:2018-11 Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification; German and English version EN 4840-001:2018
DIN 65551:1988-01 Aerospace; blind rivets with 100° reduced countersunk head, metric series, corrosion-resisting steel, with mandrel
DIN 3900:2001-06 Non soldering compression fittings with cutting ring series LL - Straight studs with taper thread
DIN 68100:1984 Tolerance system for wood working and wood processing; concepts, series of tolerances, shrinkage and swelling
DIN EN ISO 8637-1:2020-10 Extracorporeal systems for blood purification - Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators (ISO 8637-1:2017); German version EN ISO 8637-1:2020
DIN EN 3049:1998-07 Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998
DIN EN 3050:1998-07 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification; German version EN 3050:1998
DIN 65433:2021-01 Aerospace series - Sleeves - Wall thickness 0,25 mm, for fasteners with reduced countersunk head; Text in German and English
DIN 65434:2021-01 Aerospace series - Sleeves - Wall thickness 0,5 mm, for fasteners with reduced countersunk head; Text in German and English
DIN 65433:2021 Aerospace series - Sleeves - Wall thickness 0,25 mm, for fasteners with reduced countersunk head; Text in German and English
DIN 65434:2021 Aerospace series - Sleeves - Wall thickness 0,5 mm, for fasteners with reduced countersunk head; Text in German and English
DIN EN 3050:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification; German version EN 3050:1998
DIN EN 4269:2023-04 Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version FprEN 4269:2023 / Note: Da...
DIN EN 3248:2003-06 Aerospace series - Pipe coupling 8°30' in titanium alloy - Adapters, reduced pipe end, with locking ring; German and English version EN 3248:2001
DIN EN 2752:1990-01 Aerospace; nuts, anchor, self locking, fixed, two lug, reduced series, with counterbore; classification: 1100 MPa/235 °C; german version EN 2752:1989
DIN EN 3768:2012-05 Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3768:2012
DIN EN 3080:2007 Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut; German and English version EN 3080:2006
DIN EN 6038:2016 Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact; German and English version EN 6038:2015
DIN EN 4708-001:2019 Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 001: Technical specification; German and English version EN 4708-001:2019
DIN 3900:2001 Non soldering compression fittings with cutting ring series LL - Straight studs with taper thread

Canadian Standards Association (CSA), Concentrated series

CSA Z10083-08-CAN/CSA-2008 Oxygen concentrator supply systems for use with medical gas pipeline systems First Edition
CAN/CSA-Z10083-2008 Oxygen concentrator supply systems for use with medical gas pipeline systems (First Edition)
CAN/CSA-ISO 8637:2012 Cardiovascular implants and extracorporeal systems — Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators (First Edition)

United States Navy, Concentrated series

NAVY MIL-P-24589 A (1)-1994 PROPORTIONER SYSTEMS, BALANCED PRESSURE, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE
NAVY MIL-P-24589 A-1992 PROPORTIONER SYSTEMS, BALANCED PRESSURE, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE

SE-SIS, Concentrated series

SIS SEN R 52 12
SIS SEN R 52 11
SIS SS-EN 2547-1990 Aerospace series — Filming of documents — Microfilm 105 mm (Microfiche A6)
SIS SS-EN 2484-1989 Aerospace series — Microfilming ofdrawings — Aperture card for 35 mm microfilm
SIS SS-EN 2499-1990 Aerospace series — Computer output microfiche (COM) — A6 microfiche
SIS SS-EN 2575-1989 Aerospace series — Filming ofdocuments — 16 mm microfilm
SIS SEN R 43 01 31-1957

CEN - European Committee for Standardization, Concentrated series

PREN 6069-2018 Aerospace series - Rivet@ 100° reduced flush head@ close tolerance - Inch series
EN 2795:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD

Association Francaise de Normalisation, Concentrated series

NF EN 6069:2022 Série aérospatiale - Rivets de précision, tête fraisée réduite 100o - Série en inches
NF EN 13565-2+AC:2019 Installations fixes de lutte contre l'incendie - Systèmes à émulseurs - Partie 2 : calcul, installation et maintenance
NF L21-419*NF EN 6069:2010 Aerospace series - Rivet, 100o reduced flush head, close tolerance - Inch series
NF EN 13565-1:2019 Installations fixes de lutte contre l'incendie - Systèmes à émulseurs - Partie 1 : exigences et méthodes d'essais relatives aux composants
NF EN 13565-1/IN1:2008 Installations fixes de lutte contre l'incendie - Systèmes à émulseurs - Partie 1 : exigences et méthodes d'essai relatives aux composants
NF L07-201*NF EN 2499:1987 Aerospace series. Computer output microfiche (com). A6 microfiche.
NF L07-203*NF EN 2547:1987 Aerospace series. Filming of documents. Microfilm 105 mm (microfiche A6).
NF EN 2484:1989 Série aérospatiale - Microfilmage des dessins - Carte à fenêtre pour microfilm 35 mm.
NF EN 4193:2002 Série aérospatiale - Système de raccordement 8o30' en alliage de titane - Raccords en té pour traversée de cloison, réduits, en ligne, type long
NF EN 4190:2002 Série aérospatiale - Système de raccordement 8o30' en alliage de titane - Raccords en té, avec écrou à jonc en ligne, réduits
NF EN 2856:2006 Série aérospatiale - Écrous à river à freinage interne fixes, angle fermé, série réduite avec chambrage - Classification : 1100 MPA/235oC
NF EN 4840-001:2018 Série aérospatiale - Manchons thermorétractables - Partie 001 : spécification technique
NF L17-211-2*NF EN 2796:2018 Aerospace series - Fluorocarbon rubber - Low compression set - Hardness 60 IRHD
NF EN 2752:1989 Série aérospatiale - Écrous à river à freinage interne fixes, double patte, série réduite avec chambrage - Classification : 1 100 MPa/235 degrés Celsius.
NF EN 3561:2002 Série aérospatiale - Système de raccordement 8o30' en alliage de titane - Olives à souder, avec joint à lèvre, de réduction
NF L07-202*NF EN 2484:1989 Aerospace series. Microfilming of drawings. Aperture card for 35 mm microfilm.
NF L07-204*NF EN 2575:1989 Aerospace series. Filming of documents. 16 mm microfilm.
NF L17-211-4*NF EN 2798:2019 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD
NF L17-215*NF EN 2799:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compression set - Hardness 90 IRHD
NF L17-211*NF EN 2795:2018 Aerospace series - Fluorocarbon rubber (FPM) - Low compression set - Hardness 50 IRHD
NF L53-153-001*NF EN 4840-001:2018 Aerospace series - Heat shrinkable moulded shapes - Part 001 : technical specification
NF M82-232:1955 MINING EQUIPMENT. COMPRESSED AIR PIPES. STEEL TUBE ELBOWS. "SMALL RADIUS" TYPE.
NF EN 2575:1989 Série aérospatiale - Enregistrement de documents sur film - Microfilm 16 mm.
NF S93-310:2004 Systems for distribution and treatment of water for dilution of concentrated solutions for hemodialysis - Design requirements, operation, performance and safety.
NF M82-231:1955 MINING EQUIPMENT. COMPRESSED AIR PIPES. STEEL TUBE ELBOWS. "NORMAL RADIUS" TYPE.
NF EN 2796:2018 Série aérospatiale - Elastomère fluroé (FKM) - Faible déformation rémanente après compression - Dureté 60 DIDC
NF EN 2799:2018 Série aérospatiale - Élastomère fluoré (FKM) - Faible déformation rémanente après compression - Dureté 90 DIDC
NF EN 2798:2019 Série aérospatiale - Élastomère fluoré (FKM) - Faible déformation rémanente après compression - Dureté 80 DIDC
NF EN 3046:1994 Série aérospatiale - Roulements pour structures d'aéronefs - Roulements en acier, cadmiés, rigides, à une rangée de billes - Séries de diamètres 0 et 2 - Catégorie à jeux réduits - Dimensions et charges
NF S93-302*NF EN ISO 8637:2014 Cardiovascular implants and extracorporeal systems - Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
NF EN ISO 8637-1:2020 Systèmes extracorporels pour la purification du sang - Partie 1 : hémodialyseurs, hémodiafiltres, hémofiltres et hémoconcentrateurs
NF EN 3538:2010 Série aérospatiale - Écrous à river, à freinage interne, fixes, double patte, série reduite, avec chambrage, en acier résistant à chaud, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante)/315 oC
NF EN 3435:2010 Série aérospatiale - Écrous à river, à freinage interne, flottants, double patte, série réduite, avec chambrage, en acier résistant à chaud, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante)/315 oC
NF EN 3047:1994 Série aérospatiale - Roulements pour structures d'aéronefs - Roulements en acier résistant à la corrosion, rigides, à une rangée de billes - Séries de diamètres 0 et 2 - Catégorie à jeux réduits dimensions et charges
NF EN 3080:2007 Série aérospatiale - Système de raccordement 8o30' en alliage de titane - Raccords en té, de réduction branche avec écrou à jonc
NF EN 3750:2010 Série aérospatiale - Écrous à river, à freinage interne, fixes, d'angle 90o, série réduite, avec chambrage, en acier résistant à chaud, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante)/315 oC
NF EN 3768:2014 Série aérospatiale - Écrous à river, à freinage interne, fixes, simple patte, série réduite, avec chambrage, en acier résistant à chaud, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante)/315 oC
NF L52-250-402*NF EN 3475-402:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402 : shrinkage and delamination
NF L46-017*NF EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
NF EN 2795:2018 Série aérospatiale - Élastomère fluoré (FKM) - Faible déformation rémanente après compression - Dureté 50 DIDC
NF EN 3475-402:2002 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essai - Partie 402 : retrait et délamination
NF EN 3636:2008 Série aérospatiale - Vis à tête cylindrique, réduite, à empreinte cruciforme déportée, à tige réduite, à filetage long, en acier résistant à chaud FE-PA92HT (A286), argentées - Classification : 900 MPa/650 oC
NF EN 3712:2008 Série aérospatiale - Écrous à river, à freinage interne, fixes, simple patte, série réduite, avec chambrage, en acier cadmié, lubrifié MoS2 - Classification : 1100 MPa (à température ambiante)/235oC
NF EN 4708-001:2019 Série aérospatiale - Manchons thermorétractables, de jonction, isolement et identification - Partie 001 : spécification technique
NF EN 4191:2002 Série aérospatiale - Système de raccordement 8o30' en alliage de titane - Raccords en té pour traversée de cloison, réduits, en pied, type long
NF L24-491*NF EN 3768:2014 Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC
NF EN 4125:2010 Série aérospatiale - Écrous à river, à freinage interne, fixes, double patte, série réduite, avec chambrage très profond, en acier résistant à chaud, lubrifiés MoS2 - Classification : 900 MPa (à température ambiante)/315oC
NF EN 4269:2023 Série aérospatiale - Écrous à river, à freinage interne, flottants, double patte, série réduite, avec chambrage, en acier, cadmiés, lubrifiés au MoS2 - Classification: 1 100 MPa (à température ambiante)/235 oC
NF S93-302-1*NF EN ISO 8637-1:2020 Extracorporeal systems for blood purification - Part 1 : haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
NF E48-117:2009 Hydraulic fluid power - Cylinders 16 MPa series compact - Mounting dimensions for double rod cylinders
NF L17-468*NF EN 6038:2017 Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact

Professional Standard - Machinery, Concentrated series

JB/T 5124-1991 TG1 series telescopic cylinder
JB/T 12222-2015 Technical conditions of three-phase asynchronous motors for YYSE2 series (IP55) compressors (frame size 80-355)

Professional Standard - Electron, Concentrated series

SJ 20742-1999 Series of basic dimensions of telescopic slide rails

Danish Standards Foundation, Concentrated series

DS/EN 2499:2007 Aerospace series - Computer output microfiche (COM) - A6 microfiche
DS/EN 6069:2009 Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
DS/EN 2547:2007 Aerospace series - Filming of documents - Microfilm 105 mm (microfiche A6)
DS/EN 4182:2002 Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced
DS/EN 2856:2006 Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore - Classification: 1 100 MPa/235 °C
DS/EN 4194:2002 Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, bulkhead
DS/EN 4192:2002 Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced bulkhead branch
DS/EN ISO 8637-1:2021 Extracorporeal systems for blood purification – Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
DS/EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
DS/EN 3050:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification
DS/EN 4191:2002 Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, reduced, bulkhead branch, long
DS/EN 3248:2001 Aerospace series - Pipe coupling 8°30' in titanium alloy - Adaptors, reduced pipe end, with lockring
DS/EN 3538:2010 Aerospace series - Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C
DS/EN 3768:2012 Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C

AENOR, Concentrated series

UNE-EN 2484:1992 AEROSPACE SERIES. MICROFILMING OF DRAWINGS. APERTURE CARD FOR 35 MM MICROFILM
UNE 28639:1988 AEROSPACE SERIES. COMPUTER OUTPUT MICROFICHE (COM). A6 MICROFICHE.
UNE 28641:1988 AEROSPACE SERIES. FILMING OF DOCUMENTS. MICROFILM 105 MM (MICROFICHE A6).
UNE-EN 2575:1992 AEROSPACE SERIES. FILMING OF DOCUMENTS. 16 MM MICROFILM.
UNE-EN 2752:1992 AEROSPACE SERIES. NUTS, ANCHOR, SELF LOCKING FIXED TWO LUG, REDUCED SERIES WITH COUNTERBORE. CLASSIFICATION 1100 MPa/235 oC.
UNE-EN 3049:1998 AEROSPACE SERIES. O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET. HARDNESS 80 IRHD.
UNE-EN 3050:1998 AEROSPACE SERIES. O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET. TECHNICAL SPECIFICATION.

FI-SFS, Concentrated series

SFS 5263-1986

Underwriters Laboratories (UL), Concentrated series

UL SUBJECT 139-2009 OUTLINE OF INVESTIGATION FOR HIGH-EXPANSION FOAM-EXTINGUISHING SYSTEM EQUIPMENT AND CONCENTRATES (Issue 5)
UL SUBJECT 139-1997 Outline of Investigation for High-Expansion Foam-Extinguishing System Equipment and Concentrates (Issue Number: 4)
UL 2775-2014 UL Standard for Safety Fixed Condensed Aerosol Extinguishing System Units (First Edition; Reprint with revisions through and including August 5, 2016)
UL SUBJECT 139-2014 Outline of Investigation for Medium- and High-Expansion Foam-Extinguishing System Equipment and Concentrates (Issue 6)
UL SUBJECT 139-2018 UL Outline for Investigation Medium- and High-Expansion Foam-Extinguishing System Equipment and Concentrates (Issue 7)

European Committee for Standardization (CEN), Concentrated series

EN 6101:2016 Aerospace series - Rivet@ 100��edium flush head@ close tolerance - Inch series
FprEN 6069-2021 Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
EN 2484:1989 Microfilming of Drawings Aperture Card for 35 mm Microfilm
EN 2499:1987 Computers Output Microfiche (COM) A6 Microfiche
EN 2752:1989 Nuts, Anchor, Self Locking Fixed, Two Lug, Reduced Series, with Counterbore Classification: 1100 MPa/235 Degrees C
EN 2575:1989 Filming of Documents 16 mm Microfilm
EN 2796:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD
EN 2799:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD
EN 4840-001:2018 Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification
EN 3745-601:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density
EN 3046:1993 Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel, cadmium plated; diameter series 0 and 2; reduced clearance category; dimensions and loads
EN 4192:2001 Aerospace series - Pipe coupling 8°30′ in titanium alloy - Tees, reduced bulkhead branch
EN 3475-402:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination
EN 3047:1993 Aerospace series; bearings, airframe rolling; rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2; reduced clearance category; dimensions and loads
EN 3712:2007 Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) / 235 °C
EN ISO 8637-1:2020 Extracorporeal systems for blood purification - Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators (ISO 8637-1:2017)
EN 4191:2001 Aerospace series - Pipe coupling 8°30′ in titanium alloy - Tees, reduced, bulkhead branch, long
EN 2856:2006 Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore - Classification: 1100 MPa/235 °C

Lithuanian Standards Office , Concentrated series

LST EN 6069-2010 Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
LST EN 4182-2003 Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced
LST EN 2856-2006 Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore - Classification: 1 100 MPa/235 °C
LST EN 4194-2003 Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, bulkhead
LST EN 2752-2001 Aerospace series - Nuts, anchor, self locking fixed, two lug, reduced series, with counterbore - Classification : 1100 MPa/235 degree C
LST EN 4192-2003 Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced bulkhead branch
LST EN 3050-2001 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification
LST EN 3049-2001 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
LST EN 4191-2003 Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, bulkhead branch, long
LST EN 3248-2002 Aerospace series - Pipe coupling 8°30' in titanium alloy - Adaptors, reduced pipe end, with lockring
LST EN 3538-2010 Aerospace series - Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C
LST EN 3768-2012 Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C

ES-UNE, Concentrated series

UNE-EN 6069:2022 Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
UNE-EN 2856:2006 Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore - Classification: 1 100 MPa/235 °C (Endorsed by AENOR in November of 2006.)
UNE-EN 2795:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD (Endorsed by Asociación Española de Normalización in April of 2018.)
UNE-EN 2798:2019 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN 2796:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD (Endorsed by Asociación Española de Normalización in September of 2018.)
UNE-EN 2799:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD (Endorsed by Asociación Española de Normalización in September of 2018.)
UNE-EN 4840-001:2018 Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification (Endorsed by Asociación Española de Normalización in October of 2018.)
UNE-EN 4192:2001 Aerospace series - Pipe coupling 8º30' in titanium alloy - Tees, reduced bulkhead branch. (Endorsed by AENOR in December of 2001.)
UNE-EN ISO 8637-1:2020 Extracorporeal systems for blood purification - Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators (ISO 8637-1:2017)
UNE-EN 3750:2010 Aerospace series - Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C (Endorsed by AENOR in March of 2010.)
UNE-EN 3768:2012 Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C (Endorsed by AENOR in April of 2012.)
UNE-EN 3435:2010 Aerospace series - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C (Endorsed by AENOR in March of 2010.)
UNE-EN 4193:2001 Aerospace series - Pipe coupling 8º30' in titanium alloy - Tees, reduced bulkhead on run long (Endorsed by AENOR in December of 2001.)
UNE-EN 6038:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact (Endorsed by AENOR in January of 2016.)

Korean Agency for Technology and Standards (KATS), Concentrated series

KS X 5907-2009(2020) Headers for microfiche of monographs and serials
KS B ISO 15779:2021 Condensed aerosol fire extinguishing systems —Requirements and test methods for components and system design, installation and maintenance — General requirements

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Concentrated series

PREN 6069-2008 Aerospace series Rivet@ 100 Degrees reduced flush head@ close tolerance Inch series (Edition P 3)
PREN 2484-1984 Microfilming of Drawings Aperture Card for 35 mm Microfilm Aerospace Series (Edition 1)
PREN 2499-1983 Computer Output Microfiche (COM) A6 Microfiche Aerospace Series (Edition 1)
PREN 6127-2006 Aerospace series Blind bolt@ 100 degrees reduced flush head high strength (Edition P2)
PREN 2855-2010 Aerospace series Nuts@ anchor@ self-locking@ fixed@ 90° corner@ reduced series@ with counterbore Classification : 1100 MPa/235 °C (Edition P2)
PREN 6050-1995 Aerospace Series Rivets@ 100 Degrees Countersunk Reduced Head Close Tolerance Shear Type in Aluminium Alloy 7050 Chemical Film Inch Series (Edition P 1)
PREN 4523-1998 Aerospace Series Metallic Materials Test Methods Compression Testing (Edition P1)
PREN 2575-1985 Aerospace Series Filming of Documents 16 mm Microfilm (Edition 1)
PREN 4362-1998 Aerospace Series Rivets@ Solid@ 100 Degree Countersunk Reduced Headin Titanium Alloy Ti 44@5 Cb@ Metric Series (Edition P 1)
PREN 4362-1999 Aerospace Series Rivets@ Solid@ 100 Degree Countersunk Reduced Head@ in Titanium Alloy Ti 44@5 Cb@ Metric Series (Edition P 2)
PREN 6069-2001 Aerospace Series Rivet@ 100 Degree Reduced Flush Head@ Close Tolerance Inch Series (Edition P 1;:2005 Edition P 2)
PREN 6069-2005 Aerospace series Rivet@ 100° reduced flush head@ close tolerance Inch series (Edition P 2; Corrigendum: 06/30/2006;:2001 Edition P 1)
PREN 2796-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 60 IRHD
PREN 2799-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 90 IRHD
PREN 2795-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 50 IRHD
PREN 2797-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 70 IRHD
PREN 2798-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 80 IRHD
PREN 2856-1989 Aerospace Series Nuts@ Anchor@ Self-Locking@ Fixed@ Closed Corner@ Reduced Series@ with Counterbore Classification: 1100 MPa/235 Degrees Celsius (Issue P 1)
PREN 2752-1986 Aerospace Series Nuts@ Anchor@ Self Locking Fixed@ Two Lug@ Reduced Series@ with Counterbore Classification: 1100 MPa/235 Degrees Celsius (Edition 1)
PREN 2795-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 50 IRHD (Edition P 2)
PREN 2798-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 80 IRHD (Edition P 2)
PREN 2796-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 60 IRHD (Edition P 2)
PREN 2797-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 70 IRHD (Edition P 2)
PREN 2799-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 90 IRHD (Edition P 2)
PREN 4363-1999 Aerospace Series Rivets@ Solid@ 100 Degree Countersunk Reduced Head@ in Titanium Alloy Ti 44@5 Cb@ with Aluminium Pigmented Coating@ Metric Series (Edition P 2)
PREN 2795-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 50 IRHD (Edition P 1)
PREN 2799-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 90 IRHD (Edition P 1)
PREN 2798-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 80 IRHD (Edition P 1)
PREN 2796-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 60 IRHD (Edition P 1)
PREN 2797-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 70 IRHD (Edition P 1)
PREN 4840-001-2016 Aerospace series Heat shrinkable moulded shapes Part 001: Technical specification (Edition P 1)
PREN 4363-2009 Aerospace series Rivets@ solid@ 100 degrees countersunk reduced head@ in titanium alloy Ti 44@5 Cb@ with aluminium pigmented coating@ metric series (Edition P 2)
PREN 4361-1998 Aerospace Series Rivets@ Solid@ 100 Degree Countersunk Reduced Head with Dome@ in Aluminium Alloy 5056A@ Anodized or Chromated@ Metric Series (Edition P 1)
PREN 4361-2009 Aerospace series Rivets@ solid@ 100 Degrees countersunk reduced head with dome@ in aluminium alloy 5056A@ anodized or chromated@ metric series (Edition P 3)
PREN 4360-2009 Aerospace series Rivets@ solid@ 100 degrees countersunk reduced head with dome@ in aluminium alloy 7050@ anodized or chromated@ metric series (Edition P 3)
PREN 4360-1998 Aerospace Series Rivets@ Solid@ 100 Degree Countersunk Reduced Head with Dome@ in Aluminium Alloy 7050@ Anodized or Chromated@ Metric Series (Edition P 1)

European Association of Aerospace Industries, Concentrated series

AECMA PREN 6069-2008 Aerospace series Rivet, 100 Degrees reduced flush head, close tolerance Inch series Edition P 3
AECMA PREN 2575-1985 Aerospace Series Filming of Documents 16 mm Microfilm Edition 1
AECMA PREN 2499-1983 Computer Output Microfiche (COM) A6 Microfiche Aerospace Series Edition 1
AECMA PREN 4523-1998 Aerospace Series Metallic Materials Test Methods Compression Testing Edition P1
AECMA PREN 3050-1990 Aerospace Series 0-Rings in Low Compression Set Fluorocarbon Rubber Technical Specification Issue P 1
AECMA PREN 6038-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of the Compression Strength After Impact Edition P1
AECMA PREN 2795-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 50 IRHD
AECMA PREN 2795-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 50 IRHD Edition P 1
AECMA PREN 2796-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 60 IRHD Edition P 1
AECMA PREN 2796-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 60 IRHD
AECMA PREN 2797-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 70 IRHD Edition P 1
AECMA PREN 2797-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 70 IRHD
AECMA PREN 2798-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 80 IRHD Edition P 1
AECMA PREN 2798-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 80 IRHD
AECMA PREN 2799-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 90 IRHD
AECMA PREN 2799-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 90 IRHD Edition P 1
AECMA PREN 3475-402-1992 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 402 - Shrinkage and Delamination Issue P 1

ESDU - Engineering Sciences Data Unit, Concentrated series

ESDU 77024 B-1979 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of sea water and its concentrates.

Jiangsu Provincial Standard of the People's Republic of China, Concentrated series

DB32/T 4558-2023 Online near-infrared detection system for traditional Chinese medicine extract extraction, concentration, and extraction production processes

AR-IRAM, Concentrated series

IRAM 2558-1961

American Society of Mechanical Engineers (ASME), Concentrated series

ASME B18.27-1998 Tapered and Reduced Cross Section Retaining Rings (Inch Series) Incorporating ASME B18.27.1, B18.27.2, B18.27.3, B18.27.4, and B18.27.5; Addenda A - 1999; Addenda B - 11/15/2000
ASME B18.27b Addenda-2000 Tapered and reduced cross section retaining rings (Inch series); Addenda
ASME B18.27a Addenda-1999 Tapered and reduced cross section retaining rings (Inch series); Addenda

KR-KS, Concentrated series

KS X ISO 5123-2008 Documentation－Headers for microfiche of monographs and serials
KS B ISO 15779-2021 Condensed aerosol fire extinguishing systems —Requirements and test methods for components and system design, installation and maintenance — General requirements

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Concentrated series

ITU-T B.19-1989 Abbreviations and Initials Used in Telecommunications - Terms and Definitions Abbreviations and Acronyms Recommendations on Means of Expression (Series B) General Telecommunications Statistics (Series C) 3 pp
ITU-T B.19-1996 Abbreviations and Initials Used in Telecommunications - Series B: Means of Expression: Definitions@ Symbols@ Classification
ITU-T B.14-1989 Terms and Abbreviations for Information Quantities in Telecommunications - Terms and Definitions Abbreviations and Acronyms Recommendations on Means of Expression (Series B) General Telecommunications Statistics (Series C) 2 pp
ITU-T B.13-1989 Terms and Definitions - Terms and Definitions Abbreviations and Acronyms Recommendations on Means of Expression (Series B) General Telecommunications Statistics (Series C) 14 pp
ITU-T B.18-1989 Traffic Intensity Unit - Terms and Definitions Abbreviations and Acronyms Recommendations on Means of Expression (Series B) General Telecommunications Statistics (Series C) 1 pp
ITU-T C.1-1989 Yearbook of Common Carrier Telecommunication Statistics - Terms and Definitions Abbreviations and Acronyms Recommendations on Means of Expression (Series B) General Telecommunications Statistics (Series C) 9 pp
ITU-T B.3-1989 Use of the International System of Units (SI) - Terms and Definitions Abbreviations and Acronyms Recommendations on Means of Expression (Series B) General Telecommunications Statistics (Series C) 2 pp
ITU-T B.1-1989 Letter Symbols for Telecommunications - Terms and Definitions Abbreviations and Acronyms Recommendations on Means of Expression (Series B) General Telecommunications Statistics (Series C) 2 pp
ITU-T B.10-1989 Graphical Symbols and Rules for the Preparation of Documentation in Telecommunications - Terms and Definitions Abbreviations and Acronyms Recommendations on Means of Expression (Series B) General Telecommunications Statistics (Ser.) 2 pp
ITU-T B.15-1989 Nomenclature of the Frequency and Wavelength Bands Used in Telecommunications - Terms and Definitions Abbreviations and Acronyms Recommendations on Means of Expression (Series B) General Telecommunications Statistics (Series C) 3 pp

BE-NBN, Concentrated series

NBN-EN 2547-1989
NBN I 01-001-1973
NBN-EN 2484-1993 Aerospace series. Microfilming of drawings. Aperture card for 35 mm microfilm
NBN-EN 2575-1993 Aerospace series. Filming of documents. 16mm microfilm

ES-AENOR, Concentrated series

Aerospace, Security and Defence Industries Association of Europe (ASD), Concentrated series

ASD-STAN PREN 4562-2000 Aerospace Series Pipe Coupling, Welded, in Heat Resisting Steel Reductors Inch Series (Edition P 1)
ASD-STAN PREN 2484-1984 Microfilming of Drawings Aperture Card for 35 mm Microfilm Aerospace Series (Edition 1)
ASD-STAN PREN 2855-2010 Aerospace series Nuts, anchor, self-locking, fixed, 90?corner, reduced series, with counterbore Classification : 1100 MPa/235 癈 Edition P2
ASD-STAN PREN 2575-1985 Aerospace Series Filming of Documents 16 mm Microfilm (Edition 1)
ASD-STAN PREN 2499-1983 Computer Output Microfiche (COM) A6 Microfiche Aerospace Series (Edition 1)
ASD-STAN PREN 3475-601-2006 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 601: Smoke Density (Edition P 2)
ASD-STAN PREN 2795-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 50 IRHD (Edition P 2)
ASD-STAN PREN 2796-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 60 IRHD (Edition P 2)
ASD-STAN PREN 2797-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 70 IRHD (Edition P 2)
ASD-STAN PREN 2798-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 80 IRHD (Edition P 2)
ASD-STAN PREN 2799-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 90 IRHD (Edition P 2)
ASD-STAN PREN 3245-1995 Aerospace Series Pipe Coupling 8 Degrees 30' in Titanium Alloy Unions, Reducer (Edition P 2)
ASD-STAN PREN 3745-601-2006 Aerospace series Fibres and cables, optical, aircraft use Test methods Part 601: Smoke density (Edition P 1)
ASD-STAN PREN 4182-1994 Aerospace Series Pipe Coupling 8 Degrees 30' in Titanium Alloy Tee, Reduced (Edition P 1)
ASD-STAN PREN 2795-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 50 IRHD (Edition P 1)
ASD-STAN PREN 2796-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 60 IRHD (Edition P 1)
ASD-STAN PREN 2797-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 70 IRHD (Edition P 1)
ASD-STAN PREN 2798-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 80 IRHD (Edition P 1)
ASD-STAN PREN 2799-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 90 IRHD (Edition P 1)
ASD-STAN PREN 4194-1994 Aerospace Series Pipe Coupling 8 Degrees 30' in Titanium Alloy Tees, Reduced, Bulkhead (Edition P 1)

HU-MSZT, Concentrated series

MSZ 7893/2-1968

Society of Automotive Engineers (SAE), Concentrated series

SAE AS52600-1-1990 AS52600-699 Nut - Reduced Hexagon - Self Locking - Deep Counterbored - Metric Series
SAE AS85049/82C-2019 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)
SAE AS85049/82B-2011 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)
SAE AS85049/82D-2019 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)
SAE AS85049/60D-2021 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR AS50151 CRIMP, AS95234, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
SAE AS85049/60A_A1-2010 Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-C-5015 Crimp, MIL-C-26482 Series 2, MIL-C-81703 Series 3, and MIL-C-83723 Series III Connectors)
SAE AS85049/60A-2009 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)
SAE AS85049/82A-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS) F
SAE AS85049/82C-2014 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)
SAE AS85049/83A-2007 (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45? SELF-LOCKING, SHIELD, BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)
SAE AS85049/84A_A1-2010 Connector Accessories, Electrical, Backshell, 90°, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
SAE AS85049/84C-2016 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING,SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, AS95234, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)
SAE AS85049/83A_A1-2010 Connector Accessories, Electrical, Backshell, 45°, Self- Locking, Shield, Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
SAE AS85049/83C-2016 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF LOCKING, SHIELD, BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, AS95234, MIL-DTL 26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III ONNECTORS)
SAE AS85049/82A_A1-2010 Connector Accessories, Electrical, Backshell, Straight, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2 AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
SAE AS85049/83D-2019 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF LOCKING, SHIELD, BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, AS95234, MIL-DTL 26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III ONNECTORS)

未注明发布机构, Concentrated series

DIN EN 1283:1996 Hemodialyzers, hemodiafilters, hemofilters, hemoconcentrators and associated LJ blood tubing systems
BS EN 3045:1994(2000) Bearings, airframe rolling — Rigid single row ball bearings in steel — Diameter series 0 and 2 — Reduced clearance category — Dimensions and loads
BS ISO 6743-3:2003(2004) Lubricants, industrial oils and related products (class L) — Classification — Part 3 : Family D (Compressors)
NF L06-832:2008 Aerospace series - Shot peening for inducement of compressive surface stresses for metallic parts.
BS EN 3047:1994(2000) Bearings, airframe rolling — Rigid single row ball bearings in corrosion resisting steel — Diameter series 0 and 2 — Reduced clearance category — Dimensions and loads
BS EN 3046:1994(2000) Bearings, airframe rolling — Rigid single row ball bearings in steel, cadmium plated — Diameter series 0 and 2 — Reduced clearance category — Dimensions and loads

SAE - SAE International, Concentrated series

SAE AS85049/60D-2017 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR AS50151 CRIMP, AS95234, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
SAE AS85049/60A-A1-2010 Connector Accessories@ Electrical@ Adapter@ Shrink Boot@ Category 5 (For MIL-DTL-5015 Crimp@ MIL-DTL-26482 Series 2@ AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
SAE AS85049/60C-2011 CONNECTOR ACCESSORIES@ ELECTRICAL@ ADAPTER@ SHRINK BOOT@ CATEGORY 5 (FOR AS50151 CRIMP@ MIL-DTL-26482 SERIES 2@ AS81703 SERIES 3@ AND MIL-DTL-83723 SERIES III CONNECTORS)
SAE AS85049/60B-2011 Connector Accessories@ Electrical@ Adapter@ Shrink Boot@ Category 5 (for MIL-C-5015 Crimp@ MIL-C-26482 Series 2@ MIL-C-81703 Series 3@ and MIL-C-83723 Series III Connectors)
SAE AS85049/60-1998 Connector Accessories@ Electrical@ Adapter@ Shrink Boot@ Category 5 (for MIL-C-5015 Crimp@ MIL-C-26482 Series 2@ MIL-C-81703 Series 3@ and MIL-C-83723 Series III Connectors)
SAE AS85049/60A-2003 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Concentrated series

GB/T 31510-2015 Economic operation of refrigerated display cabinet systems with remote refrigerant compressor condensing units

Professional Standard - Aquaculture, Concentrated series

SC/T 8054.2-1998 Technical requirements for repairing of fishing vessel refrigeration system.Repairing of 10 series marine piston refrigerating compressor

Defense Logistics Agency, Concentrated series

DLA DSCC-DWG-88064 REV D-2006 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, STRAIGHT CATEGORY 3C, FOR MIL-DTL-83723 SERIES III, MIL-DTL-5015 (SAE-AS34001 AND MS3450), SAE-AS81703 SERIES III, AND MIL-C-26482 SERIES II
DLA DSCC-DWG-89017 REV C-2002 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 45 DEG., CATEGORY 3C, FOR MIL-DTL-83723 SERIES III, MIL-DTL-5015 SAE-AS3400 AND MS3450), SAE-AS81703 SERIES III, AND MIL-C-26482 SERIES II
DLA DSCC-DWG-89018 REV D-2006 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 90 DEG., CATEGORY 3C, FOR MIL-DTL-83723 SERIES III, MIL-DTL-5015 (SAE-AS3400 AND MS3450), SAE-AS81703 SERIES III, AND MIL-C-26482 SERIES II

NATO - North Atlantic Treaty Organization, Concentrated series

STANAG 3367-1990 Characteristics of Breathing Gas Supplied by Molecular Sieve Oxygen Concentrating Systems (MSOCS) and Supply Equipment (ED 1 AMD 0 Cancelled without Replacement; To obtain please contact your national Defense Standardization Office or the NATO Standardiza

International Federation of Trucks and Engines, Concentrated series

NAVISTAR ESP NM-5.101-GS-2015 VOID - Tapered and Reduced Cross Section (Circlip) Retaining Rings - Metric Series (Noun Code -7175)

IT-UNI, Concentrated series

UNI 4745-1961

National Association of Corrosion Engineers (NACE), Concentrated series

NACE SP0592-1992 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service
NACE SP0294-2006 Design, Fabrication, and Inspection of Storage Tank Systems for Concentrated Fresh and Process Sulfuric Acid and Oleum at Ambient Temperatures (Item No. 21063)

International Telecommunication Union (ITU), Concentrated series

ITU-T FASCICLE I.3-1988 Terms and Definitions Abbreviations and Acronyms Recommendations on Means of Expression (Series B), General Telecommunications Statistics (Series C)
ITU-T V.44-2000 Data compression procedures Study Group 16

RO-ASRO, Concentrated series

STAS SR ISO 6743-3A:1995 Lubricants industrial oils and related producte (class L) - Classrfication Part 3A: Family D (Compressors)

KP-CSK, Concentrated series

KPS 8790-3A-2002 Lubricants, industrial oils and related products(class L)-Classification-Part 3A:Family D(Compressors)

GOSTR, Concentrated series

GOST ISO 6743-3-2013 Lubricants, industrial oils and related products (class L). Classification. Part 3. Family D (compressors)