ZH
RU
ES

Integration Test Lab

Integration Test Lab, Total:498 items.

In the international standard classification, Integration Test Lab involves: Construction materials, Earthworks. Excavations. Foundation construction. Underground works, Analytical chemistry, Road vehicle systems, Corrosion of metals, Water quality, Quality, Products of the textile industry, Wood, sawlogs and sawn timber, Standardization. General rules, Soil quality. Pedology, Fuels, Air quality, Mobile services, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Wastes, Environmental protection, Acoustics and acoustic measurements, Installations in buildings, Environmental testing, Protection against crime, Coals, Tyres, Applications of information technology, Industrial automation systems, Medical equipment, Pulps, Non-textile floor coverings, Ergonomics, Fishing and fish breeding, Fertilizers, Laboratory medicine, Plastics, Metrology and measurement in general, Protection against fire, Test conditions and procedures in general, Edible oils and fats. Oilseeds, Ventilators. Fans. Air-conditioners, Extraction and processing of petroleum and natural gas, Protection of and in buildings, Services, Equipment for petroleum and natural gas industries, Microbiology, Refractories, Road engineering, Construction industry, Paints and varnishes, Petroleum products in general, Packaging and distribution of goods in general, Products of the chemical industry, Elements of buildings, Lubricants, industrial oils and related products, Energy and heat transfer engineering in general, Aerospace engines and propulsion systems, Rubber, Textile fibres, Testing of metals, Paper and board, Structure and structure elements.

HU-MSZT, Integration Test Lab

American Society for Testing and Materials (ASTM), Integration Test Lab

ASTM C1077-07a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-07 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-11 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C1077-10d Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-11a Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C1077-03a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-03 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-02 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-00 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-11c Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C1077-06 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-10 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-10a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-06a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-05b Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-05a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-10c Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-05 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-05be1 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-11b Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C942-99(2004) Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C942-99 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM D346-04e1 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM D346-04 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM D346-04(2010) Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM E2935-13 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM C942-15 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM E1133-86(2000) Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM E1133-86(2022) Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM E596-96(2002) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E596-96(2002)e1 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E596-96(2009) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM C953-06 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C943-17 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM C943-10 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM C942/C942M-21 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C941-96 Standard Test Method for Water Retentively of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
ASTM C941-16 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
ASTM C1222-06 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1021-08(2014) Standard Practice for Laboratories Engaged in Testing of Building Sealants
ASTM D4427-92(2007) Standard Classification of Peat Samples by Laboratory Testing
ASTM D4427-92(1997) Standard Classification of Peat Samples by Laboratory Testing
ASTM D4427-13(2017) Standard Classification of Peat Samples by Laboratory Testing
ASTM D4427-18 Standard Classification of Peat Samples by Laboratory Testing
ASTM E2653-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E596-96(2016) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E691-21 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-22 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E2935-17 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E2935-16 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D6275-98(2003) Standard Practice for Laboratory Testing of Bridge Decks (Withdrawn 2004)
ASTM ANS/ISO 17025-99 General requirements for the competence of testing and calibration laboratories
ASTM ANS/ISO 17025-05 General Requirements for the Competence of Testing and Calibration Laboratories
ASTM ANS/ISO17025-05 General Requirements for the Competence of Testing and Calibration Laboratories
ASTM ANS/ISO17025-99 General requirements for the competence of testing and calibration laboratories
ASTM F551/F551M-09a Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires
ASTM C1021-08(2023) Standard Practice for Laboratories Engaged in Testing of Building Sealants
ASTM E2489-06 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM E2489-06e1 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM F551-89(2000) Standard Practice for Using a 67.23-in. (1.707-m) Diameter Laboratory Test Roadwheel in Testing Tires
ASTM E596-96 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM D7847-17 Standard Guide for Interlaboratory Studies for Microbiological Test Methods
ASTM E2653-14 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E596-22 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM D969-85(2003) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM C940-98a(2003) Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C940-98a Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C940-10 Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C940-22 Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM E691-19e1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-20 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-05 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-18 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-19 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-09e1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D7401-08 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
ASTM C943-96 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM E531-76(1996)e1 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
ASTM D4427-07 Standard Classification of Peat Samples by Laboratory Testing
ASTM D4575-99(2005) Standard Test Methods for Rubber Deterioration8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM D4575-09(2015) Standard Test Methods for Rubber Deterioration&x2014;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM D4575-09 Standard Test Methods for Rubber Deterioration8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM E1133-86(1996)e1 Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM E1133-86(2016) Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM E691-99 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D7778-15(2022)e1 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-08 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-11 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D584-10 Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
ASTM F551/F551M-16 Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires
ASTM D1413-07 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
ASTM D1413-99 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
ASTM D1413-07e1 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
ASTM D6617-00 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-05 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-08 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D4575-09(2019) Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM E2963-16 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments
ASTM F1903-98(2003) Standard Practice for Testing for Biological Responses to Particles In Vitro
ASTM D4427-92(2002)e1 Standard Classification of Peat Samples by Laboratory Testing
ASTM F1903-98 Standard Practice for Testing for Biological Responses to Particles In Vitro
ASTM D4427-13 Standard Classification of Peat Samples by Laboratory Testing

Military Standard of the People's Republic of China-General Armament Department, Integration Test Lab

GJB 2725-1996 General requirements for calibration laboratories and testing laboratories
GJB 2725A-2001 General requirements for testing laboratories and calibration laboratories
GJB 165.6-1986 Fuze laboratory test Fuze static clock mechanism time measurement test
GJB 2926-1997 Electromagnetic compatibility testing laboratory accreditation requirements
GJB 165.6A-2019 Laboratory test of fuze Part 6: Static timing test of fuze clock mechanism
GJB 165.6A-2004 Laboratory test of fuze Part 6: Static down test of fuze clock mechanism

US-FCR, Integration Test Lab

FCR FED H-08-1 SEC 01410-2004 TESTING LABORATORY SERVICES
FCR VA 01 45 29-2012 TESTING LABORATORY SERVICES
FCR COE ER 1110-1-8100-1997 LABORATORY INVESTIGATIONS AND TESTING
FCR COE ER 1140-1-210-1979 LABORATORY INVESTIGATIONS AND MATERIALS TESTING
FCR COE ER 1110-1-1401-1989 INTERLABORATORY TESTING PROGRAM FOR CHEMICAL ANALYSES
FCR COE ER 1110-1-261-1999 QUALITY ASSURANCE OF LABORATORY TESTING PROCEDURES
FCR COE EM 1110-2-1909-1970 CALIBRATION OF LABORATORY SOILS TESTING EQUIPMENT
FCR COE EM 1110-2-1909 CHANGE 1-1986 CALIBRATION OF LABORATORY SOILS TESTING EQUIPMENT
FCR FED SPEC PUB 736-1987 PROCEEDINGS OF THE CONFERENCE ON ACCREDITATION OF CONSTRUCTION MATERIALS TESTING LABORATORIES
FCR 21 CFR PART 660-2015 ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS
FCR 21 CFR PART 660-2014 ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS
FCR 21 CFR PART 660-2013 ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS
FCR COE EM 1110-2-1906-1970 LABORATORY SOILS TESTING, REPRINT INCORPORATES CHANGES 1-2
FCR COE EP 1-1-10-1985 CORPS OF ENGINEERS LABORATORY, INVESTIGATIONAL, RESEARCH AND TESTING FACILITIES
FCR COE ER 70-1-8-1980 WORK FOR OTHERS LABORATORY RESEARCH AND DEVELOPMENT AND TESTS

Indonesia Standards, Integration Test Lab

SNI 1744-2012 Metode uji CBR laboratorium
SNI 03-3399-1994 Test method for tensile strength of wood in the laboratories
SNI 07-6217-2000 Testing methods of metal laboratory corrosion
SNI 03-3400-1994 Test method for friction strenght of wood in laboratories.
SNI 03-3959-1995 Test method for bending strength of wood in laboratories
SNI 03-3960-1995 Test method for modulus of bending elasticity of wood in laboratories
SNI 7957-2014
SNI 8072-2016 Cara uji pengukuran potensi keruntuhan tanah di laboratorium
SNI 03-2437-1991 Laboratory test method for determination of physical characteristic parameter of stone sample
SNI 03-4166-1996 Test method for shear strength of red brick walls in laboratory

PT-IPQ, Integration Test Lab

NP EN 932-2-2002 Tests for general properties of aggregates Part 2:Methods for reducing laboratory samples
NP EN ISO/IEC 17025:2000 General requirements for the competence of testing and calibration laboratories

European Committee for Standardization (CEN), Integration Test Lab

CEN PREN 14727-2003 Laboratory furniture - Storage units for laboratories - Requirements and test methods
EN ISO 10140-3:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2021)
EN ISO 10140-3:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010)
EN ISO 17892-6:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test
EN ISO 5269-1:2000 Pulps - Preparation of Laboratory Sheets for Physical Testing - Part 1: Conventional Sheet-Former Method ISO 5269-1:1998
EN 592:2002 Instructions for Use in Vitro Diagnostic Instruments for Self-Testing
EN 592:1994 In Vitro Diagnostic Systems - Requirements for User Manuals for In Vitro Diagnostic Instruments for Home Use
CEN EN 13150-2001 Workbenches for Laboratories - Dimensions, Safety Requirements amd Test Methods

Danish Standards Foundation, Integration Test Lab

DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
DS/EN ISO 3696:1996 Water for analytical laboratory use - Specification and test methods
DS/EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
DS/EN ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method
DS/EN ISO 10416:2010 Petroleum and natural gas industries - Drilling fluids - Laboratory testing
DS/EN 13150:2001 Workbenches for laboratories - Dimensions, safety requirements and test methods
DS/EN 15002:2006 Characterization of waste - Preparation of test portions from the laboratory sample

Lithuanian Standards Office , Integration Test Lab

LST EN 14727-2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
LST ISO 5089:1996 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
LST EN 13150-2002 Workbenches for laboratories - Dimensions, safety requirements and test methods
LST EN ISO 3696:1996 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
LST EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008)
LST EN 15002-2006 Characterization of waste - Preparation of test portions from the laboratory sample

AENOR, Integration Test Lab

UNE-EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
UNE 103502:1995 TEST LABORATORY METHOD FOR DETERMINING IN A SOIL THE C.B.R. INDEX.
UNE-EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure.
UNE-EN 13150:2001 Workbenches for laboratories. Dimensions, safety requirements and test methods.
UNE-EN ISO 3696:1996 WATER FOR ANALYTICAL LABORATORY USE. SPECIFICATION AND TEST METHODS. (ISO 3696:1987).
UNE-EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008)

Society of Automotive Engineers (SAE), Integration Test Lab

SAE J2334-2003 Laboratory Cyclic Corrosion Test
SAE J984-1967 BODY FORMS FOR LABORATORY IMPACT TESTING
SAE J994-2003 Alarm Backup Electric Laboratory Performance Testing
SAE J994-2023 Alarm - Backup - Electric Laboratory Performance Testing
SAE AIR5797-2008 Aircraft Tire Wear Profile Development and Execution for Laboratory Testing
SAE J944A-1968 STEERING CONTROL SYSTEM — PASSENGER CAR — LABORATORY TEST PROCEDURE
SAE J1633-1995 Laboratory Speed Test Procedure for Light Truck Tires
SAE J944-2022 Steering Control System - Passenger Car - Laboratory Test Procedure
SAE J2425-1998 Steering Control Systems - Laboratory Test Procedure Heavy Trucks
SAE J346-1968 SEATBACK ASSEMBLY LABORATORY IMPACT TEST PROCEDURE-HEAD AREA
SAE J2800-2007 Laboratory Corrosion/Fatigue Testing of Vehicle Suspension Coil Springs

SAE - SAE International, Integration Test Lab

SAE J2334-2002 Cosmetic Corrosion Lab Test
SAE J2334-2016 Laboratory Cyclic Corrosion Test
SAE J2334-1998 Cosmetic Corrosion Lab Test
SAE J984-1992 BODYFORMS FOR USE IN MOTOR VEHICLE PASSANGER COMPARTMENT IMPACT DEVELOPMENT
SAE J2883-2020 Laboratory Measurement of Random Incidence Sound Absorption Tests Using a Small Reverberation Room
SAE J2883-2015 Laboratory Measurement of Random Incidence Sound Absorption Tests Using a Small Reverberation Room
SAE J944-1968 STEERING CONTROL SYSTEM - PASSENGER CAR - LABORATORY TEST PROCEDURE
SAE J944-1965 STEERING WHEEL ASSEMBLY - LABORATORY TEST PROCEDURE
SAE J944-1980 STEERING WHEEL ASSEMBLY - LABORATORY TEST PROCEDURE
SAE J2425-2021 Steering Control Systems - Laboratory Test Procedure Heavy Trucks
SAE J2425-2004 Steering Control Systems - Laboratory Test Procedure Heavy Trucks
SAE J3040-2015 Electric Vehicle (E-Vehicle) Crash Test Lab Safety Guidelines
SAE J3040-2022 Electric Vehicle (E-Vehicle) Crash Test Lab Safety Guidelines
SAE J2800-2016 Laboratory Corrosion/Fatigue Testing of Vehicle Suspension Coil Springs

未注明发布机构, Integration Test Lab

SAE J2334-201604 Laboratory Cyclic Corrosion Test
BS EN ISO 3696:1995(1999) Water for analytical laboratory use — Specification and test methods
BS EN ISO 5269-1:2005(2009) Pulps — Preparation of laboratory sheets for physical testing — Part 1 : Conventional sheet - former method
BS EN ISO 10416:2009(2010) Petroleum and natural gas industries — Drilling fluids — Laboratory testing

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Integration Test Lab

ASHRAE CH-99-9-1999 Symposium on Laboratory Verification and Testing
ASHRAE 110-2016 Methods of Testing Performance of Laboratory Fume Hoods
ASHRAE 110 INT 1-2011 Method of Testing Performance of Laboratory Fume Hoods
ASHRAE 130-2016 Laboratory Methods of Testing Air Terminal Units
ASHRAE AC-02-2-3-2002 Surface Temperatures of Window Specimens: Infrared Thermography Laboratory Measurements
ASHRAE 4001-1996 Development of Ventilation Rates and Design Information for Laboratory Animal Facilities: Part 2 - Laboratory Tests (RP-730)
ASHRAE SA-96-6-1-1996 Surface Temperatures of Insulated Glazing Units: Infrared Thermography Laboratory Measurements
ASHRAE 51-1985 Laboratory Methods of Testing Fans for Rating (AMCA Standard 210-85)
ASHRAE 51 INT 2-2000 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51 ERTA-2006 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51 INT 1-2000 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51 ADD A-2001 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 3689-1993 Field Performance of Residential Refrigerators: A Comparison with the Laboratory Test
ASHRAE 68-1997 Laboratory Method of Testing to Determine the Sound Power in a Duct (AMCA 330-97)

Professional Standard - Agriculture, Integration Test Lab

CNAS-EL-21-2022 Instructions for Accreditation of Internal Laboratories of Group Enterprises (Trial Implementation)
CNAS-GL043-2020 Guidelines for the Evaluation of Uncertainty in Measurement of ELISA Tests in Veterinary Testing Laboratories

Korean Agency for Technology and Standards (KATS), Integration Test Lab

KS I ISO TS 20612:2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS I ISO 20612:2009 Water quality－Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS B ISO 10303-32:2002 Industrial automation system and integration－Product data representation and exchange－Part 32：Conformance testing methodology and framwork－Requirement on testing laboratories and clients
KS C IEC 61223-2-5:2013 Evaluation and routine testing in medical imaging departments－Part 2－5：Constancy tests－Image display devices
KS B ISO 10303-32-2002(2018) Industrial automation system and integration－Product data representation and exchange－Part 32：Conformance testing methodology and framwork－Requirement on testing laboratories and clients
KS Q ISO/IEC 17025:2019 General requirements for the competence of testing and calibration laboratories
KS D 0235-2015(2020) Laboratory test method of sacrificial anodes for cathodic protection
KS M ISO 5269-1:2006 Pulps-Preparation of laboratory sheets for physical testing-Part 1:Conventional sheet-former method
KS M ISO 5269-1:2021 Pulps — Preparation of laboratory sheets for physical testing —Part 1: Conventional sheet-former method
KS M ISO 5269-1:2016 Pulps－Preparation of laboratory sheets for physical testing－Part 1：Conventional sheet-former method
KS Q ISO 13528-2017(2022) Statistical methods for use in proficiency testing by interlaboratory comparisons
KS K ISO 11378-2:2019 Textile floor coverings — Laboratory soiling tests — Part 2: Drum test
KS A ISO/IEC GUIDE 43-2:2002 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2:2013 Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS I ISO 11274:2005 Soil quality－Determination of the water retention characteristic(Laboratory method)
KS C IEC 61223-3-1:2013 Evaluation and routine testing in medical imaging departments－Part 3－1：Acceptance tests－Imaging performance of X-ray equipment for radiographic and radioscopic systems

KR-KS, Integration Test Lab

KS I ISO TS 20612-2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS Q ISO/IEC 17025-2019 General requirements for the competence of testing and calibration laboratories
KS M ISO 5269-1-2021 Pulps — Preparation of laboratory sheets for physical testing —Part 1: Conventional sheet-former method
KS M ISO 5269-1-2016 Pulps－Preparation of laboratory sheets for physical testing－Part 1：Conventional sheet-former method
KS K ISO 11378-2-2019 Textile floor coverings — Laboratory soiling tests — Part 2: Drum test

FI-SFS, Integration Test Lab

SFS 5207-1986
SFS 5120-1985
SFS 5485-1988 In case of interpretation disputes the English textapplies

ES-AENOR, Integration Test Lab

UNE 66-802-1989
UNE 66-501-1991
UNE 66-502-1991 General criteria for the assessment of testing laboratories
UNE 66-801-1989
UNE 66-804-1989

Compressed Gas Association (U.S.), Integration Test Lab

CGA M-13-2008 Certifying third-party testing laboratories
CGA M-13-2014 Certifying third-party testing laboratories

RO-ASRO, Integration Test Lab

STAS 1913/6-1976 Foundation ground LABORATORY PERMEABILITY TEST
STAS SR EN 45001-1993 Generai criteria for the operation of testing iaboratories

RU-GOST R, Integration Test Lab

GOST R 51000.3-1996 General criteria for testing laboratories
GOST 23740-2016 Soils. Methods of laboratory determination of organic composition
GOST 30416-2012 Soils. Laboratory testing. General requirements
GOST R 51000.4-2008 General requirements for accreditation of testing laboratories
GOST R 51000.4-2011 General requirements for accreditation of testing laboratories
GOST R 51000.4-1996 State system for standardization of the Russian Federation. Accreditation system in the Russian Federation. General requirements for accreditation of testing laboratories
GOST 31299-2005 Noise of machines. Determination of sound insulation performances of cabins. Laboratory and in situ test
GOST R ISO 10303-32-2002 Industrial automation systems and integration. Product data representation and exchange. Part 32. Conformance testing methodology and framework. Requirements on testing laboratories and clients
GOST R 57225-2016 Plastics. Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
GOST R 8.692-2009 State system for ensuring the uniformity of measurements. Requirements for the competence of providers of proficiency testing for test laboratories by interlaboratory comparisons
GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
GOST R ISO/IEC 17025-2000 General requirements for the competence of testing and calibration laboratories
GOST R ISO/IEC 17025-2006 General requirements for the competence of testing and calibration laboratories
GOST R ISO 5089-1999 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
GOST R ISO 10191-2012 Tyres for passenger cars. Verifying tyres characterics. Laboratory test methods

SE-SIS, Integration Test Lab

SIS SS 02 01 81-1985 General requirements for the acceptance of testing laboratories
SIS SS 16 18 12-1984 Plastics — Methods of exposure to laboratory light sources
SIS SS-EN 45 002-1989 General criteria for the assessment of testing laboratories
SIS SS-EN 45 001-1989 General criteria for the operation of testing laboratories
SIS SS 02 01 80-1987 General requirements for the technical competence of testing laboratories
SIS SS 2095-1986 Heating equipment - Heat pumps - Laboratory testing of performance

International Organization for Standardization (ISO), Integration Test Lab

ISO/IEC GUIDE 38:1983 General requirements for the acceptance of testing laboratories
ISO/TS 20612:2007 Water quality - Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
ISO/CD 16313-2 Laboratory test of dust collection systems utilizing porous filter media online cleaned using pulses of compressed gas — Part 2: Systems utilizing integrated fans
ISO/CD 16313-1:2023 Laboratory test of dust collection systems utilizing porous filter media online cleaned using pulses of compressed gas — Part 1: Systems utilizing integrated fans
ISO 17892-11:2019 Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Permeability tests
ISO 10303-32:1998 Industrial automation systems and integration - Product data representation and exchange - Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients
ISO/IEC GUIDE 25:1990 General requirements for the competence of calibration and testing laboratories
ISO 17892-7:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined compression test
ISO 10191:2021 Passenger car tyres — Verifying tyre capabilities — Laboratory test methods
ISO 17892-10:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests
ISO 5725:1981 Precision of test methods — Determination of repeatability and reproducibility by inter-laboratory tests
ISO 5269-1:1998 Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method
ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method
ISO 5269-1:1979 Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method
ISO 11274:1998 Soil quality - Determination of the water-retention characteristic - Laboratory methods

Professional Standard - Light Industry, Integration Test Lab

QB/T 4873-2015 Test methods of artificial leather and synthetic leather.Exposure to laboratory light sources

Association Francaise de Normalisation, Integration Test Lab

NF P94-072:1995 Sols : reconnaissance et essais - Essai scissométrique en laboratoire
NF P18-621-2*NF EN 932-2:1999 Tests for general properties of aggregates. Part 2 : methods for reducing laboratory samples.
NF EN 12155:2000 Façades rideaux - Détermination de l'étanchéité à l'eau - Essai de laboratoire sous pression statique
FD CEN ISO/ASTM TR 52917:2022 Fabrication additive - Essais interlaboratoires - Lignes directrices générales
NF A06-000:1979 Statistical interpretation of interlaboratory tests. Simplified method applicable to maximum 20 laboratories and maximum 10 results per laboratory.
NF EN 17542-2:2022 Terrassements - Essais géotechniques en laboratoire - Partie 2 : Essai de fragmentabilité
NF EN ISO 664:2008 Graines oléagineuses - Réduction de l'échantillon pour laboratoire en échantillon pour essai
NF R12-755*NF ISO 10191:2021 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
NF G06-001*NF EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
NF EN ISO 10416:2010 Industries du pétrole et du gaz naturel - Fluides de forage - Essais en laboratoire
NF X15-206:2022 Sorbonnes de laboratoire - Seuil pour les essais de confinement et de vitesse
NF EN 12697-35:2017 Mélanges bitumineux - Essais - Partie 35 : malaxage de laboratoire
NF P98-230-3:1993 Tests relating to pavement. Preparation of materials bound with cementitious binders or aggregates mixes. Part 3 : fabrication in the laboratory of gravel or sound mixes for samples confection.
NF EN ISO 10722:2019 Géosynthétiques - Mode opératoire d'essai pour évaluer l'endommagement mécanique sous charge répétée - Endommagement causé par des matériaux granulaires (méthode d'essai en laboratoire)
NF Q50-019-1*NF EN ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Part 1 : conventional sheet-former method
NF EN ISO 17892-6:2017 Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 6 : essai de pénétration de cône
NF EN ISO 17892-11:2019 Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 11 : essais de perméabilité
NF EN ISO 11378-2:2001 Revêtements de sol textiles - Essais d'encrassement en laboratoire - Partie 2 : essai au tambour
NF EN ISO 5269-1:2005 Pâtes - Préparation des feuilles de laboratoire pour essais physiques - Partie 1 : méthode de la formette conventionnelle
NF P94-512-11*NF EN ISO 17892-11:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 11 : permeability tests
NF EN ISO 17892-7:2018 Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 7 : essai de compression uniaxiale
NF X30-455*NF EN 15002:2015 Characterization of waste - Preparation of test portions from the laboratory sample
NF EN 15002:2015 Caractérisation des déchets - Préparation de prises d'essai à partir de l'échantillon pour laboratoire
NF G38-123*NF EN ISO 10722:2019 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method)

British Standards Institution (BSI), Integration Test Lab

BS 6460-1:1983 Accreditation of testing laboratories - Specification of the general requirements for the technical competence of testing laboratories
BS ISO 8858-1:2019 Hard coal. Froth flotation testing - Laboratory procedure
BS EN ISO 17892-10:2018 Geotechnical investigation and testing. Laboratory testing of soil - Direct shear tests
BS EN ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Conventional sheet-former method
BS EN 17542-2:2022 Earthworks. Geotechnical laboratory tests - Fragmentability test standard
BS EN 17542-1:2022 Earthworks. Geotechnical laboratory tests - Degradability test standard
BS EN ISO 11378-2:2001+A1:2017 Textile floor coverings. Laboratory soiling tests - Drum test
BS ISO 10303-32:1998 Industrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework: Requirements on testing laboratories and clients
BS EN ISO 17892-11:2019 Geotechnical investigation and testing. Laboratory testing of soil - Permeability tests
BS EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
BS EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
BS EN ISO 17892-1:2014 Geotechnical investigation and testing. Laboratory testing of soil. Determination of water content
PD ISO/TS 22638:2018 Rubber. Generation and collection of tyre and road wear particles (TRWP). Road simulator laboratory method
BS EN ISO 17892-8:2018 Geotechnical investigation and testing. Laboratory testing of soil - Unconsolidated undrained triaxial test
BS EN 60068-2-21:2006 Environmental testing - Tests - Test U. Robustness of terminations and integral mounting devices
PD ISO/TR 19867-3:2018 Clean cookstoves and clean cooking solutions. Harmonized laboratory test protocols. Voluntary performance targets for cookstoves based on laboratory testing
BS EN ISO 17892-4:2016 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle size distribution
BS EN ISO 17892-1:2014+A1:2022 Geotechnical investigation and testing. Laboratory testing of soil - Determination of water content
BS EN ISO 17892-3:2015 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle density
BS EN ISO 17892-2:2014 Geotechnical investigation and testing. Laboratory testing of soil. Determination of bulk density
BS EN 993-13:1995 Methods of test for dense shaped refractory products - Specification for pyrometric reference cones for laboratory use
BS EN ISO 17892-6:2017 Tracked Changes. Geotechnical investigation and testing. Laboratory testing of soil. Fall cone test
BS ISO 10416:2008 Petroleum and natural gas industries - Drilling fluids - Laboratory testing
BS EN ISO 10722:2019 Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading. Damage caused by granular material (laboratory test method)
BS EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forminglimit curves - Part 2: Determination of forming-limit curves in the laboratory
BS EN ISO 12004-2:2021 Metallic materials. Determination of forming-limit curves for sheet and strip. Determination of forming-limit curves in the laboratory
BS EN ISO 17892-12:2018+A2:2022 Geotechnical investigation and testing. Laboratory testing of soil - Determination of liquid and plastic limits
23/30448662 DC BS ISO 22638. Rubber. Generation and collection of tyre and road wear particles (TRWP). Road simulator laboratory method
PD ISO/TR 12705:2011 Graphic technology. Laboratory test method for chemical ghosting in lithography
BS EN 12697-35:2016 Tracked Changes. Bituminous mixtures. Test methods. Laboratory mixing

PL-PKN, Integration Test Lab

PN B04481-1988 Building soils Laboratory tests
PN EN 45002-1993 General criteria for the assessment of testing laboratories
PN G04502-1990 Hard coal Samplins and prepafation for laboratory testing
PN H11079-1973 Foundry moulding materials Laboratory tests Sempling
PN P04600-1991 Textiles. Determination of the precision of test methods by inter-laboratory tests
PN B13043-1986 Laboratory glassware Test tubes Specification and methods of test
PN BN 7469-01-1968 Printing inks System of laboratory testing methods
PN T06515-06-1989 pH-metry Laboratory pH-meters General re?uirements and tests
PN H11076-1973 Foundry moulding materials Laboratory ?ests Determination bonding clay con?ent
PN P22101-1992 Leather Preparation of laboratory samples for tests
PN P04756-1992 Textiles. Preparation of laboratory test samples and test sprcimens for chemical testing
PN H04630-1966 Corrosion tes?ing of me?als Laboratory ?es?ing of intercrystalline corrosion resis?ance of corrosion resis?ing steel

Taiwan Provincial Standard of the People's Republic of China, Integration Test Lab

CNS 15009-2006 Proficiency testing by interlaboratory comparisons
CNS 13123-1992 General Requirements for The Acceptance of Testing Laboratories
CNS 13125-1992 Development and Operation of Laboratory Proficiency Testing
CNS 17025-2007 General requirements for the competence of testing and calibration laboratories
CNS 17025-2001 General requirements for the competence of testing and calibration laboratories

AT-ON, Integration Test Lab

ONORM EN 45002-1990 General criteria for the assesment of testing laboratories

NO-SN, Integration Test Lab

NS 8011-1982 Geotechnical testing - Laboratory methods - Density
NS 8013-1982 Geotechnical testing - Laboratory methods - Water content
NS 8010-1982 Geotechnical testing - Laboratory methods - Soil constituents and structure - Terms and symbols
NS 8003-1982 Geotechnical testing - Laboratory methods - Plastic limit
NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles

American Petroleum Institute (API), Integration Test Lab

API RP 13I-2020 Laboratory Testing of Drilling Fluids (NINTH EDITION)

Association of German Mechanical Engineers, Integration Test Lab

VDI 4221 Blatt 2-2017 Quality assurance - Requirements on interlaboratory tests in immission control - Design, performance and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions
VDI 4221 Blatt 1-2015 Quality assurance - Requirements on interlaboratory tests in immission control - Requirements on providers of interlaboratory tests

American National Standards Institute （ANSI), Integration Test Lab

ANSI/ASTM E2935:2013 Practice for Conducting Equivalence Testing in Laboratory Applications
ANSI/AMCA 500-L-2015 Laboratory Methods of Testing Louvers for Rating
ANSI/ASHRAE 130-2016 Laboratory Methods of Testing Air Terminal Units
ANSI/AMCA 240-1996 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/AMCA 240-2006 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/ASTM E2653a:2009 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer than Six Participating Laboratories
ANSI/NCSL Z540-1-1994 Calibration -- Calibration Laboratories and Measuring and Test Equipment -- General Requirements
ANSI/ASTM E691:2013 PRACTICE FOR CONDUCTING AN INTERLABORATORY STUDY TO DETERMINE THE PRECISION OF A TEST METHOD
ANSI/AMCA 260-2013 Laboratory Methods of Testing Induced Flow Fans for Rating
ANSI/ASTM D6617:2013 Practice For Laboratory Bias Detection Using Single Test Result from Standard Material
ANSI/AMAC 500-L-2007 Laboratory Methods of Testing Louvers for Rating
ANSI/AMCA 250-2012 Laboratory Methods of Testing Jet Tunnel Fans for Rating
ANSI/AMCA 500-L-2012 Laboratory Methods of Testing Louvers for Rating
ANSI/ASHRAE 207-2021 Laboratory Method of Test of Fault Detection and Diagnosis for Air Economizers
ANSI/AMCA 500-D-2012 Laboratory Methods of Testing Dampers for Rating

North Atlantic Treaty Organization Standards Agency, Integration Test Lab

STANAG 4572-2007 OPEN SYSTEM ARCHITECTURE INTERFACE TO ENABLE SIMULATOR LABORATORY TEST OF INTEGRATED GLOBAL POSITIONING SYSTEM/INERTIAL NAVIGATION EQUIPMENT

IT-UNI, Integration Test Lab

UNI 6687-1973

GM Global, Integration Test Lab

GMW 14872-2013 Cyclic Corrosion Laboratory Test Issue 3; English

Professional Standard - Environmental Protection, Integration Test Lab

HJ/T 155-2004 The guidelines of chemical testing good laboratory practices

Professional Standard - Machinery, Integration Test Lab

JB/T 8537-1997 Laboratory test method of dust specific electric resistance
JB/T 8537-2010 Testing method for dust resistivity in lab
JB/T 8537-2023 Testing method for dust resistivity in laboratory
JB/T 7439.2-1994 Terminology relating to laboratory instruments - Dynamic test instrument

National Association of Corrosion Engineers (NACE), Integration Test Lab

NACE TM0169-2000 Laboratory Corrosion Testing of Metals Item No:21200
NACE TM0169-2012 Standard Guide for Laboratory Immersion Corrosion Testing of Metals (Item No. 21200)
NACE TM0190-2006 Impressed Current Laboratory Testing of Aluminum Alloy Anodes Item No:21221

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Integration Test Lab

ASHRAE 110 ERTA-2016 Methods of Testing Performance of Laboratory Fume Hoods
ASHRAE 110-1995 Method of Testing Performance of Laboratory Fume Hoods
ASHRAE 51-2008 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51-2007 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 207-2021 Laboratory Method of Test of Fault Detection and Diagnosis for Air Economizers
ASHRAE IC 51-1999-02-1999 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating

German Institute for Standardization, Integration Test Lab

DIN EN 12155:2000-10 Curtain walling - Watertightness - Laboratory test under static pressure; German version EN 12155:2000
DIN 13221:2016-08 Laboratory refrigerators and freezers - Terminology, requirements, testing
DIN EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005); German and English version EN ISO/IEC 17025:2005
DIN EN ISO/IEC 17025:2018-03 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017); German and English version EN ISO/IEC 17025:2017
DIN 30665-1:2021-06 Gas-appliances - Gas burners for laboratory use (laboratory burners) - Part 1: Safety requirements and tests / Note: This standard is part of the DVGW body of rules.*DIN 30665-1 (1982-03) remains valid alongside this standard until 2021-11-30.
DIN 18125-1:2010 Soil, investigation and testing - Determination of density of soil - Part 1: Laboratory tests
DIN EN ISO 5089:2016-09 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977); German version EN ISO 5089:2016
DIN 18125-1:1997 Soil, investigation and testing - Determination of density of soil - Part 1: Laboratory tests
DIN 25412-2:2015-12 Laboratory equipment - Glove boxes - Part 2: Leakage test
DIN EN ISO 10416:2010-04 Petroleum and natural gas industries - Drilling fluids - Laboratory testing (ISO 10416:2008); English version EN ISO 10416:2009
DIN 12927:1995-10 Laboratory furniture - Ductless filtering fume enclosures - Requirements, test
DIN 18130-1:1998 Soil - investigation and testing; Determination of the coefficient of water permeability - Part 1: Laboratory tests
DIN EN ISO 10722:2020-03 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019); German version EN ISO 10722:2019
DIN EN ISO 17892-10:2019-04 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018); German version EN ISO 17892-10:2018
DIN 12600:1990 Laboratory volumetric instruments; conformity testing and certification
DIN 51412-1:2005 Testing of petroleum products - Determination of the electrical conductivity - Part 1: Laboratory method
DIN EN ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:2005); German version EN ISO 5269-1:2005
DIN EN ISO 17892-11:2021-03 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019); German version EN ISO 17892-11:2019
DIN EN ISO 17892-7:2018-05 Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test (ISO 17892-7:2017); German version EN ISO 17892-7:2018
DIN EN 17542-2:2022 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard
DIN EN 17542-2:2022-08 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard; German version EN 17542-2:2022
DIN EN 17542-1:2022-08 Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard; German version EN 17542-1:2022
DIN 55437-1:2021-12 Testing of folding cartonboard - Creasings - Part 1: Laboratory production of test creasings
DIN EN ISO 11378-2:2017-11 Textile floor coverings - Laboratory soiling tests - Part 2: Drum test (ISO 11378-2:2001 + Amd 1:2017); German version EN ISO 11378-2:2001 + A1:2017
DIN ISO/TS 17892-1:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO/TS 17892-1:2004); German version CEN ISO/TS 17892-1:2004
DIN 55437-1:2021 Testing of folding cartonboard - Creasings - Part 1: Laboratory production of test creasings
DIN EN 15002:2015-07 Characterization of waste - Preparation of test portions from the laboratory sample; German version EN 15002:2015
DIN EN ISO 664:2008-11 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008); German version EN ISO 664:2008

BELST, Integration Test Lab

STB 941.5-96 System of accreditation and testing laboratories of Belarus. Experts on attestation of calibration and testing laboratories
STB 941.3-93 System of accreditation of verification ant testing laboratory of Belarus. General requirements for estimation of technical competence verification and testing laboratory

GB-REG, Integration Test Lab

REG NASA-LLIS-0729--2000 Lessons Learned ?Integration and Test Practices to Eliminate Stresses on Electrical and Mechanical Components

CEN - European Committee for Standardization, Integration Test Lab

EN ISO 17892-11:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests
EN ISO 17892-7:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test
EN ISO 17892-10:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests
PREN 13150-2018 Workbenches for laboratories - Dimensions@ safety requirements and test methods

YU-JUS, Integration Test Lab

JUS G.S2.006-1984 Leather. Laboratory samples and preparation for testing
JUS U.B1.042-1997 Testing ofsoil - Determination of the California bearing rado in laboratory
JUS B.E8.131-1991 Insulating glass units. Determination of dew point temperature, Laboratory test
JUS H.N8.160-1988 Pulps. Ffaparation of laboratory sheets forphysical testing. Conventional sheet-former method
JUS N.R1.900-1980 Digital integrated circuits. Acceptance and reSability. Ekctrical tests

Professional Standard - Coal, Integration Test Lab

MT/T 895-2000 Guidelines for quality control in coal laboratory

Professional Standard - Public Safety Standards, Integration Test Lab

GA/T 1780-2021 Specifications for the construction of multi-channel psychological testing laboratories

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Integration Test Lab

GB/T 31429-2015 Guide for quality management in a coal laboratory
GB/T 24324-2009 Pulps.Preparation of laboratory sheets for physical testing.Conventional sheet-former method
GB/T 29170-2012 Petroleum and natural gas industries.Drilling fluids.laboratory testing
GB/T 16656.32-1999 Industrial automation systems and integration--Product data representation and exchange--Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients
GB/T 31023-2014 Mobile laboratory.General specification for equipment operating condition test

CZ-CSN, Integration Test Lab

CSN 63 1502-1988 Tyre testing. Instruction for the preparation of tyres for laboratory tests
CSN ISO 5089:1994 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
CSN 72 1026-1992 Laboratory determination of the Shear Strength of soils by vane test
CSN 30 3109-1974 Laboratory testing of fric-tlon materials for clutch facing
CSN CEN ISO/TS 17892-10:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests
CSN 67 3091-1983 Laboratory tests of resistance of paint coatings in atmospherical conditíons

Japanese Industrial Standards Committee (JISC), Integration Test Lab

JIS P 8222:2015 Pulps -- Preparation of laboratory sheets for physical testing -- Conventional sheet-former method
JIS Z 9325:1996 General requirements for the competence of calibration and testing laboratories

API - American Petroleum Institute, Integration Test Lab

API STD 1512-1995 Petroleum Test Laboratory Accreditation Program (First Edition)
API RP 13I-2004 Recommended Practice for Laboratory Testing of Drilling Fluids (Seventh Edition)
API RP 13I-2009 Recommended Practice for Laboratory Testing of Drilling Fluids (EIGHTH EDITION)
API RP 13I-2000 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (Sixth Edition)
API RP 13I-1990 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (FOURTH EDITION)
API RP 13I SUPP 1-1992 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (Fourth Edition)
API PUBL 4632-1995 Reducing Uncertainty in Laboratory Sediment Toxicity Tests

Professional Standard - Medicine, Integration Test Lab

YY/T 1915-2023 General rules for laboratory testing of immunochromatographic kits

Professional Standard - Geology, Integration Test Lab

DZ/T 0130.16-2006 Geology and Mineral Resources Laboratory Testing Quality Management Regulations Part 16: Storage of Laboratory Samples and Secondary Samples
DZ 0129-1994 Quality management specification for laboratory testing of geological and mineral resources
DZ/T 0130.12-2006 Geological and Mineral Laboratory Testing Quality Management Specification Part 12: Soil Testing

IN-BIS, Integration Test Lab

Canadian Standards Association (CSA), Integration Test Lab

CSA A283-06-2006 Qualification Code for Concrete Testing Laboratories Fourth Edition: Update No 1: September 2007

International Electrotechnical Commission (IEC), Integration Test Lab

ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories

IFI/FASTNR - Industrial Fastener Institute, Integration Test Lab

139-1991 Quality Assurance Requirements for Fastener Testing Laboratories

Standard Association of Australia （SAA）, Integration Test Lab

AS ISO 10416:2022 Petroleum and natural industries — Drilling fluids — Laboratory testing
AS ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
AS 4180.1:1994 Drift loss from cooling towers - Laboratory measurement - Chloride balance method

The American Road & Transportation Builders Association, Integration Test Lab

AASHTO T 265-2015 Standard Method of Test for Laboratory Determination of Moisture Content of Soils

AASHTO - American Association of State Highway and Transportation Officials, Integration Test Lab

T 265-1993 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
T 288-1991 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity
T 288-2012 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity

Group Standards of the People's Republic of China, Integration Test Lab

T/LZZLXH 056-2021 Specification for management of media and reagents for laboratory testing
T/SDAS 247-2021 Management specifiaction of reagent consumables of ecological environmental monitoring laboratory
T/SHRH 027-2019 In Vitro Test -Inhibition of Melanin Synthesis in B16 Cells Test
T/CAMS 57-2021 Energy efficiency test method for laboratory equipment —Centrifuges

ES-UNE, Integration Test Lab

UNE-EN ISO 10416:2009 Petroleum and natural gas industries - Drilling fluids - Laboratory testing (ISO 10416:2008) (Endorsed by AENOR in January of 2010.)
UNE-EN ISO 10722:2020 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019)
UNE-EN ISO 17892-6:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test (ISO 17892-6:2017)
UNE-EN ISO 17892-10:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018)
UNE-EN ISO 17892-11:2020 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019)
UNE-EN 17542-1:2023 Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard.
UNE-EN 17542-2:2023 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard.
UNE-EN 15002:2015 Characterization of waste - Preparation of test portions from the laboratory sample
UNE-EN ISO 15701:2015 Characterization of waste - Preparation of test portions from the laboratory sample

国家能源局, Integration Test Lab

NB/T 10523.1-2021 Test methods for mechanical properties of drum shearers Part 1: Laboratory tests

Institute of Electrical and Electronics Engineers (IEEE), Integration Test Lab

IEEE 2665-2022 IEEE Recommended Practice for Statistical Process Control for EMC Test Laboratories
IEEE Std 2665-2022 IEEE Recommended Practice for Statistical Process Control for EMC Test Laboratories

ZA-SANS, Integration Test Lab

SANS 17025:2005 General requirements for the competence of testing and calibration laboratories