ZH
RU
ES

mesh polymer

mesh polymer, Total:500 items.

In the international standard classification, mesh polymer involves: Installations in buildings, Medical equipment, Equipment for the chemical industry, Rubber and plastics products, Cellular materials, Iron and steel products, Reinforced plastics, Packaging materials and accessories, Materials and articles in contact with foodstuffs, Leather technology, Construction materials, Plastics, Paints and varnishes, Waxes, bituminous materials and other petroleum products, Road engineering, Dentistry, Rubber, Networking, Materials for aerospace construction, Insulation, Terminology (principles and coordination), Protection against fire, Edible oils and fats. Oilseeds, Products of the textile industry, Protection of and in buildings, Sacks. Bags, Raw materials for rubber and plastics, Microbiology, Pipeline components and pipelines, Elements of buildings, Fertilizers, Aerospace electric equipment and systems, Equipment for petroleum and natural gas industries, Components for electrical equipment, Road vehicles in general, Products of the chemical industry, Materials for the reinforcement of composites, Mining equipment, Construction industry, Surface treatment and coating, Electronic display devices, External sewage systems, Electrical wires and cables.


Professional Standard - Urban Construction, mesh polymer

  • CJ/T 181-2003 Polyethylene(PE) composite pipes with porous steel strip for water supply
  • CJ/T 182-2003 Buried polyethylene (PE) composite pipes with porous steel strip for the supply of gaseous fuels
  • CJ/T 212-2005 Water grate made of polymer matrix composites
  • CJ/T 544-2021 polymer permeable concrete
  • CJ/T 211-2005 Inspection manhole lid made of polymer matrix composites

BR-ABNT, mesh polymer

  • ABNT NBR 15723-4-2020 Implants for surgery - Polymeric materials Part 4: Requirements for porous polyethylene polymers
  • ABNT NBR 15723-3-2020 Implants for surgery - Polymeric materials Part 3: Requirements for polyaryletherketone (PAEK) polymers

Professional Standard - Chemical Industry, mesh polymer

  • HG/T 3706-2014 Perforated steel skeleton polyethylene composite pipes for industry
  • HG/T 3706-2003 Perforated steel skeleton polyethylene composite pipes for industry
  • HG/T 3707-2003 Fittings of perforated steel skeleton polyethylene composite pipes for industry
  • HG/T 3707-2012 Fittings of perforated steel skeleton polyethylene composit pipes for industry
  • HG/T 5517～5518-2019 Polymer coated urea and polymer sulfur coated urea (2019)

American Society for Testing and Materials (ASTM), mesh polymer

  • ASTM D1667-76(1990) Standard Specification for Flexible Cellular MaterialsÐVinyl Chloride Polymers and Copolymers (Closed-Cell Foam)
  • ASTM F2919/F2919M-12 Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels
  • ASTM D1667-97 Standard Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam)
  • ASTM D1667-05 Standard Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam)
  • ASTM D1565-76 Standard Specification for Flexible Cellular Materials - Vinyl Chloride Polymers And Copolymers ( Open-Cell Foam)
  • ASTM D1565-81(1990) Standard Specification for Flexible Cellular Materials - Vinyl Chloride Polymers And Copolymers ( Open-Cell Foam)
  • ASTM F2453/F2453M-14 Standard Specification for Welded Wire Mesh Fence Fabric 40;Metallic-Coated or Polymer Coated41; for Meshes of 6 in.2? [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes
  • ASTM D6484/D6484M-04 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM D5766/D5766M-02 Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D5766/D5766M-02a Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D6484/D6484M-04e1 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM D6484/D6484M-99e1 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM D6484/D6484M-20 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM D3575-00 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
  • ASTM D3575-00e1 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
  • ASTM D3575-08 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
  • ASTM D3575-14 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
  • ASTM F2453/F2453M-05(2011)e1 Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes
  • ASTM D6742/D6742M-02 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
  • ASTM D6742/D6742M-01 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
  • ASTM D6742-17-17 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
  • ASTM D6484/D6484M-14 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM D5766/D5766M-23 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D7615/D7615M-23 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
  • ASTM D6484/D6484M-23 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM D5766/D5766M-95 Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D5766/D5766M-02a(2007) Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D5766/D5766M-07 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D5766/D5766M-11(2018) Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D6742/D6742M-23 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
  • ASTM F755-99 Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants
  • ASTM F755-99e1 Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants
  • ASTM F755-99(2005) Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants
  • ASTM D6742/D6742M-02(2007) Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
  • ASTM D6742/D6742M-12 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
  • ASTM D6742/D6742M-17 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
  • ASTM D5260-04 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • ASTM D5260-97 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • ASTM D5260-22 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • ASTM D5260-16 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • ASTM E1428-99(2004) Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium reticulum (A Pink Stain Organism)
  • ASTM E1428-99 Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium Reticulum (A Pink Stain Organism)
  • ASTM E1428-99(2009) Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium reticulum (A Pink Stain Organism)
  • ASTM E1428-15 Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species (A Pink Stain Organism)
  • ASTM E3364-22 Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Porous and Nonporous Materials Against Staining by Streptomyces species (A Pink Stain
  • ASTM F794-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
  • ASTM D6742/D6742M-07 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
  • ASTM D1784-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • ASTM D5260-04(2010) Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • ASTM D2287-81(1988)e1 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
  • ASTM D2287-11 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
  • ASTM D2287-12 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
  • ASTM D7258-23 Standard Specification for Polymeric Piles
  • ASTM F1921/F1921M-12e1 Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
  • ASTM D2287-96(2010) Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
  • ASTM D7615/D7615M-11 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
  • ASTM D7173-14 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
  • ASTM F1925-22 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
  • ASTM E1428-15a Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species (A Pink Stain Organism)
  • ASTM D7258-14 Standard Specification for Polymeric Piles
  • ASTM D7258-17 Standard Specification for Polymeric Piles

未注明发布机构, mesh polymer

  • BS EN ISO 4638:1995(2000) Polymeric materials, cellular flexible — Determination ofair flow permeability
  • BS ISO 6915:2019(2020) Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification
  • BS ISO 6916-1:1995(2007) Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1 : Sheeting

(U.S.) Ford Automotive Standards, mesh polymer

RU-GOST R, mesh polymer

European Committee for Standardization (CEN), mesh polymer

  • EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes
  • EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
  • EN ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers
  • EN ISO 20795-2:2010 Dentistry - Base polymers - Part 2: Orthodontic base polymers
  • EN ISO 7231:2023 Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop (ISO 7231:2023)
  • EN ISO 8067:2018 Flexible cellular polymeric materials - Determination of tear strength
  • EN ISO 8067:2008 Flexible cellular polymeric materials - Determination of tear strength
  • EN ISO 305:1999 Plastics - Determination of Thermal Stability of Poly (Vinyl Chloride), Related Chlorine-Containing Homopolymers and Copolymers and Their Compounds - Discoloration Method
  • EN ISO 17304:2013 Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
  • EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
  • CEN/TS 19101:2022 Design of fibre-polymer composite structures

American National Standards Institute （ANSI), mesh polymer

CZ-CSN, mesh polymer

  • CSN 64 7029-1980 Testing of synthetic leathers. Flex resistance of poromeres and artificial leathers
  • CSN 64 7011-1975 Determination of mass of poromeres and other plastic products
  • CSN 64 7010-1975 Measurement of thickness, width and length of poromeres and other plastic products
  • CSN 64 7030-1976 Determination of layers adhesion of poromeres, artificial leathers etc. of multi layer plastics products
  • CSN 64 9005-1985 Aqueous dispursions of polymers ind copolymers ensile test
  • CSN 64 0701-1975 Sampling and conditioning of test pecimens of poromeres, artificial eathers etc. of plastics products
  • CSN 64 9007-1986 Aqueous dispersions of polymers nd copolymers etermination of foaming
  • CSN 64 9004-1982 Aqueous dispersions of polymers and opolymers etermination of pH
  • CSN 80 0525-1993 Testing of polymer film tapes
  • CSN 64 9008-1986 Aqueous dispersions of homopolyntors nd copolymers. Detormination of oagulum and rough admixtures- ontent by sievo analysis

Association Francaise de Normalisation, mesh polymer

  • NF EN ISO 4638:1995 Matériaux polymères alvéolaires souples - Détermination de la perméabilité à l'air
  • NF Z88-213*NF ETS 300213:1994 Network aspects (NA). Metropolitan area network (MAN). Physical layer, convergence procedure for 2,048 mbit/S.
  • NF T56-109*NF EN ISO 8067:2018 Flexible cellular polymeric materials - Determination of tear strength
  • NF EN ISO 8067:2018 Matériaux polymères alvéolaires souples - Détermination de la résistance au déchirement
  • NF EN ISO 10066:1998 Matériaux polymères alvéolaires souples - Détermination du fluage en compression
  • NF EN ISO 2439:2009 Matériaux polymères alvéolaires souples - Détermination de la dureté (technique par indentation)
  • NF T56-117*NF EN ISO 2440:2019 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
  • NF EN ISO 2440:2019 Matériaux polymères alvéolaires souples et rigides - Essais de vieillissement accéléré
  • NF Q03-096*NF EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes.
  • NF EN ISO 1856:2018 Matériaux polymères alvéolaires souples - Détermination de la déformation rémanente après compression
  • NF EN ISO 8307:2018 Matériaux polymères alvéolaires souples - Détermination de la résilience par rebondissement d'une bille
  • NF EN ISO 7231:2010 Matériaux polymères alvéolaires souples - Détermination de l'indice d'écoulement d'air à chute de pression constante
  • NF EN ISO 1798:2008 Matériaux polymères alvéolaires souples - Détermination de la résistance à la traction et de l'allongement à la rupture
  • NF T56-134:1998 Flexible cellular polymeric materials. Determination of resilience.
  • NF EN 13676:2001 Papiers et cartons enduits de polymères destinés à entrer en contact avec les denrées alimentaires - Détection des trous d'épingle
  • NF EN ISO 3385:2014 Matériaux polymères alvéolaires souples - Détermination de la fatigue par indentation à charge constante
  • NF EN ISO 5999:2013 Matériaux polymères alvéolaires souples - Mousse de polyuréthanne pour utilisations soumises à des charges, à l'exclusion des revers de tapis - Spécifications
  • NF EN ISO 20795-1:2013 Médecine bucco-dentaire - Polymères de base - Partie 1 : polymères pour base de prothèses dentaires
  • NF EN ISO 20795-2:2013 Médecine bucco-dentaire - Polymères de base - Partie 2 : polymères pour base orthodontique
  • NF T56-112/A1:2007 Flexible cellular polymeric materials - Determination of compression set.
  • NF T56-135*NF EN ISO 10066:1998 Flexible cellular polymeric materials. Determination of creep in compression.
  • NF S91-213:1996 Dentistry. Synthetic polymer teeth.
  • NF S91-229*NF EN ISO 17304:2014 Dentistry - Polymerisation shrinkage : method for determination of polymerisation shrinkage of polymer-based restorative materials
  • NF T51-043*NF EN ISO 1624:2003 Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water
  • NF T60-240*NF ISO 6656:2003 Animal and vegetable fats and oils - Determination of polyethylene-type polymers
  • NF Z88-214*NF ETS 300214:1996 Network aspects (NA). Metropolitan area network (MAN). Physical layer convergence procedure for 34,368 mbit/S.
  • NF Z88-215*NF ETS 300215:1996 Network aspects (NA). Metropolitan area network (MAN). Physical layer convergence procedure for 139,264 mbit/S.
  • NF Z88-216*NF ETS 300216:1996 Network aspects (NA). Metropolitan area network (MAN). Physical layer convergence procedure for 155,520 mbit/S.
  • NF EN 13632:2010 Bitumes et liants bitumineux - Visualisation de la dispersion des polymères dans les bitumes modifiés par des polymères
  • NF T51-701*NF EN ISO 4610:2002 Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus
  • NF ISO 6656:2003 Corps gras d'origines animale et végétale - Dosage des polymères de type polyéthylène
  • NF T51-052*NF ISO 1148:1988 Plastics. Aqueous dispersions of polymers and copolymers. Determination of ph.
  • NF T51-054:1968 Plastics. Aqueous dispersions of polymers and copolymers. Dry extract at 105 degrees C.
  • NF T51-251:1984 Plastics. Aqueous dispersions of polymers and copolymers. Measurement of density.

Group Standards of the People's Republic of China, mesh polymer

  • T/CECS 10142-2021 Polyethylene (PE) plastic-steel composite steady-state pipe with mesh skeleton for water supply
  • T/YNSX 8-2020 Polyethylene (PE) perforated skeleton plastic-steel composite steady-state pipe for water supply
  • T/HBTL 011-2020 Polyurethane/Polyacrylate Latex Interpenetrating Network Polymer Emulsion
  • T/CSTM 00483-2022 Test method for open-hole tensile test of fiber reinforced polymer matrix composite materialslaminates
  • T/CSTM 00284-2020 Test method for open-hole compressive properties of fiber reinforced polymer matrix composite laminates
  • T/CECS 1002-2022 Engineering technical regulations for polyethylene (PE) plastic-steel composite steady-state pipes for water supply
  • T/HEBQIA 025-2021 vegetable polymer fuel oil
  • T/YNSX 008-2022 MASPE hole mesh skeleton plastic steel composite steady pipe
  • T/CECS 10192-2022 polymer microcement
  • T/PLQ 0003-2018 polymer modified bitumen
  • T/ZAQ 10109-2022 Composite polymer for permeable mortar
  • T/SHHJ 000026-2019 Polymer-modified cement for waterproof membrane

Danish Standards Foundation, mesh polymer

  • DS/EN ISO 8067:2009 Flexible cellular polymeric materials - Determination of tear strength
  • DS/EN ISO 1856/A1:2009 Flexible cellular polymeric materials - Determination of compression set
  • DS/EN ISO 1856:2001 Flexible cellular polymeric materials - Determination of compression set
  • DS/EN ISO 4638:1995 Polymeric materials, cellular flexible - Determination of air flow permeability
  • DS/EN ISO 2440/A1:2010 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
  • DS/EN ISO 2440:2000 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
  • DS/EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
  • DS/EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes
  • DS/EN ISO 3385:1995 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding
  • DS/EN ISO 1798:2008 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
  • DS/EN ISO 5999:2013 Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification
  • DS/EN ISO 7231:2010 Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop
  • DS/EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
  • DS/EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
  • DS/ISO 7270:1988 Rubber. Identification of polymers (single polymers and blends). Pyrolytic gas chromatographic method
  • DS/EN ISO 10066:1998 Flexible cellular polymeric materials - Determination of creep in compression
  • DS/EN 13632:2010 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen

Lithuanian Standards Office , mesh polymer

  • LST EN ISO 4638:2001 Polymeric materials, cellular flexible - Determination of air flow permeability (ISO 4638:1984)
  • LST EN 13676-2003 Polymer coated paper and board intended for food contact - Detection of pinholes
  • LST EN ISO 2440:2001 Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997)
  • LST EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
  • LST EN ISO 1798:2008 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008)
  • LST EN ISO 1856:2002/A1:2008 Flexible cellular polymeric materials - Determination of compression set - Amendment 1 (ISO 1856:2000/Amd 1:2007)
  • LST EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013)
  • LST EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013)
  • LST EN 13632-2010 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
  • LST EN ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2008)
  • LST EN ISO 20795-2:2010 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2010)
  • LST EN ISO 2440:2001/A1:2010 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 1 (ISO 2440:1997/Amd 1:2010)

Korean Agency for Technology and Standards (KATS), mesh polymer

KR-KS, mesh polymer

  • KS M ISO 8067-2018 Flexible cellular polymeric materials — Determination of tear strength
  • KS M ISO 2440-2022 Flexible and rigid cellular polymeric materials — Accelerated ageing tests
  • KS P ISO 20795-1-2020 Dentistry — Base polymers — Part 1: Denture base polymers
  • KS P ISO 20795-2-2021 Dentistry — Base polymers — Part 2: Orthodontic base polymers
  • KS P ISO 13781-2019 Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing
  • KS P ISO 17304-2022 Dentistry Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer based restorative materials
  • KS P ISO 17304-2017 Dentistry ─ Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
  • KS P ISO 4049-2017 Dentistry — Polymer-based restorative materials
  • KS P ISO 14233-2020 Dentistry — Polymer-based die materials

British Standards Institution (BSI), mesh polymer

  • BS ISO 23641:2021 Flexible cellular polymeric materials. Determination of antibacterial effectiveness
  • BS EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes
  • BS EN ISO 20795-2:2013 Dentistry. Base polymers. Orthodontic base polymers
  • BS EN ISO 7231:2023 Polymeric materials, cellular, flexible. Determination of air flow value at constant pressure-drop
  • BS EN ISO 20795-1:2008 Dentistry - Base polymers - Denture base polymers
  • BS EN ISO 20795-1:2013 Dentistry. Base polymers. Denture base polymers
  • BS ISO 7270-1:2003+A1:2010 Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
  • BS ISO 7270-1:2020 Rubber. Analysis by pyrolytic gas-chromatographic methods - Identification of polymers (single polymers and polymer blends)
  • BS EN ISO 20795-2:2010 Dentistry - Base polymers - Orthodontic base polymers
  • 22/30434607 DC BS EN ISO 7231. Polymeric materials, cellular, flexible. Determination of air flow value at constant pressure-drop
  • BS EN 13499:2003 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification
  • BS ISO 6656:2002 Animal and vegetable fats and oils - Determination of polyethylene-type polymers
  • BS EN 13632:2010 Bitumen and bituminous binders. Visualisation of polymer dispersion in polymer modified bitumen
  • BS ISO 6915:2019 Flexible cellular polymeric materials. Polyurethane foam for laminate use. Specification
  • BS EN ISO 2440:2019 Flexible and rigid cellular polymeric materials. Accelerated ageing tests
  • BS EN ISO 305:1999 Plastics - Determination of thermal stability of poly (vinyl chloride) related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method
  • BS EN ISO 17304:2013 Dentistry. Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
  • PD CEN/TS 19101:2022 Design of fibre-polymer composite structures

Professional Standard - Traffic, mesh polymer

  • JT/T 986-2015 Additional polymer materials of steel wire rope meshes and polymer mortar for structural strengthing
  • JT/T 987-2015 Steel wire ropes of steel wire rope meshes and polymer mortar for structural strengthing

GOSTR, mesh polymer

  • GOST R 58964-2020 Composite polymer mesh for reinforcement of masonry. Specifications
  • GOST R 57748-2017 Composite polymers. Method for in situ determination of polymer network parameters of cross-linked ultra high molecular weight polyethylene in solvent
  • GOST R 57868-2017 Polymer composites. Identification of polymer layers and inclusions by infrared microscopy
  • GOST R 57859-2017 Polymer composites. Test method for determining resistance of synthetic polymeric materials to fungi

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, mesh polymer

  • GB/T 41955-2022 Test method for compression of fiber reinforced polymer matrix composite multi-directional laminates without open-hole
  • GB/T 30968.3-2014 Test method for open-hole/loaded-hole of polymer matrix composite laminates.Part 3:Test method of open-hole tensile strength
  • GB/T 30968.4-2014 Test method for open-hole/loaded-hole of polymer matrix composite laminates.Part 4:Test method of open-hole compressive strength
  • GB/T 30968.2-2014 Test method for open-hole/loaded-hole of polymer matrix composite laminates.Part 2:Test method of filled-hole tension and compression
  • GB/T 30968.1-2014 Test method for open-hole/loaded-hole of polymer matrix composite Iaminates.Part 1:Test method of bearing response
  • GB/T 42258-2022 Flexible cellular polymeric materials—Determination of fatigue by a constant-strain procedure
  • GB/T 10652-2001 Flexible cellular polymeric materials--Determination of resilience
  • GB/T 31062-2014 Polymeric polyols
  • GB/T 42267-2022 Flexible cellular polymeric materials—Determination of compression set under humid conditions
  • GB/T 14274-2003 Polymeric materials cellular flexible--Accelerated ageing tests
  • GB/T 22480-2008 Animal and vegetable fats and oils.Determination of polyethylene-type polymers
  • GB/T 10808-2006 Flexible cellular polymeric materials.Determination of tear strength
  • GB/T 18944.1-2003 Flexible cellular polymeric materials--Sponge and expanded cellular rubber products--Part 1: Sheeting
  • GB/T 8325-1987 Determination for pH of aqueous dispersions of polymers and copolymers
  • GB 8325-1987 Method for determination of pH value of aqueous polymer and copolymer dispersions
  • GB/T 10655-2003 Polymeric materials,cellular flexible--Determination of air flow permeability
  • GB/T 12825-2003 Polymeric materials,cellular flexible--Determination of hardness by indentation technique
  • GB/T 10653-2001 Polymeric materials,cellular flexible--Determination of compression set

German Institute for Standardization, mesh polymer

  • DIN EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes; German version EN 13676:2001
  • DIN EN 13676:2001-06 Polymer coated paper and board intended for food contact - Detection of pinholes; German version EN 13676:2001
  • DIN EN ISO 2440:2020 Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2019)
  • DIN EN ISO 7231:2022-07 Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop (ISO/DIS 7231:2022); German and English version prEN ISO 7231:2022 / Note: Date of issue 2022-06-10*Intended as replacement for DIN EN ISO 7231 (2010-12).
  • DIN EN ISO 8307:2018 Flexible cellular polymeric materials - Determination of resilience by ball rebound (ISO 8307:2018)
  • DIN EN ISO 20795-2:2013-06 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013); German version EN ISO 20795-2:2013
  • DIN EN ISO 20795-1:2013-06 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013); German version EN ISO 20795-1:2013
  • DIN EN ISO 20795-1:2009 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2008); English version of DIN EN ISO 20795-1:2009-02
  • DIN EN ISO 1856:2008 Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2000+Amd 1:2007) (includes Amendment A1:2007); English version of DIN EN ISO 1856:2008-01
  • DIN EN ISO 7231:2010-12 Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop (ISO 7231:2010); German version EN ISO 7231:2010 / Note: To be replaced by DIN EN ISO 7231 (2022-07).
  • DIN EN ISO 7231:2023-11 Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop (ISO 7231:2023); German version EN ISO 7231:2023
  • DIN EN ISO 8067:2018-12 Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:2018); German version EN ISO 8067:2018
  • DIN EN ISO 8067:2018 Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:2018); German version EN ISO 8067:2018
  • DIN EN ISO 17304:2014-03 Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013); German version EN ISO 17304:2013
  • DIN 7724:1993 Polymeric materials; grouping of polymeric materials based on their mechanical behaviour
  • DIN EN ISO 2439:2009-05 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008); German version EN ISO 2439:2008
  • DIN EN 13499:2003 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification; German version EN 13499:2003
  • DIN 13998:2012 Dentistry - Test method for the bonding test between polymer teeth and denture base polymer
  • DIN EN 13632:2010-11 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen; German version EN 13632:2010
  • DIN ISO 2028:2004 Synthetic rubber latex - Preparation of dry polymer (ISO 2028:1999)
  • DIN 65262-1:2017 Aerospace series - Sealing compounds - Part 1: Polysulphide polymer base, Technical specification; Text in German and English
  • DIN EN ISO 3385:2014-10 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding (ISO 3385:2014); German version EN ISO 3385:2014
  • DIN EN ISO 1856:2020-11 Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2018); German version EN ISO 1856:2018
  • DIN EN ISO 1856:2018 Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2018); German version EN ISO 1856:2018

International Organization for Standardization (ISO), mesh polymer

  • ISO/CD 2440 Flexible and rigid cellular polymeric materials — Accelerated ageing tests
  • ISO 7231:2023 Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop
  • ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
  • ISO 7270:1987 Rubber; Identification of polymers (single polymers and blends); Pyrolytic gas chromatographic method
  • ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers
  • ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
  • ISO 7270-1:2020 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)
  • ISO 7270-1:2003 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends)
  • ISO/FDIS 7231 Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop
  • ISO 20795-2:2010 Dentistry — Base polymers — Part 2: Orthodontic base polymers
  • ISO 5475:1978 Rubber — Identification of polymers — Pyrolytic/gas chromatographic method — Single polymers
  • ISO 7270-1:2003/Amd 1:2010 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends); Amendment 1
  • ISO 3336:1993 Dentistry; synthetic polymer teeth
  • ISO 2898-2:1989 Plastics; plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P); part 2: preparation of test specimens and determination of properties
  • ISO 6656:2002 Animal and vegetable fats and oils - Determination of polyethylene-type polymers
  • ISO 6656:1984 Animal and vegetable fats and oils; Determination of polyethylene-type polymers
  • ISO 305:1976 Plastics — Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compounds — Discoloration method
  • ISO 2028:1974 Title missing - Legacy paper document
  • ISO 2028:1999 Synthetic rubber latex - Preparation of dry polymer
  • ISO 2028:2015 Synthetic rubber latex - Preparation of dry polymer
  • ISO 20795-1:2008/Cor 1:2009 Dentistry - Base polymers - Part 1: Denture base polymers; Technical Corrigendum 1
  • ISO 305:1990 Plastics; determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds; discoloration method
  • ISO 1856:1980 Polymeric materials, cellular flexible — Determination of compression set
  • ISO 17304:2013 Dentistry.Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
  • ISO 2898-1:1986 Plastics; Plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P); Part 1 : Designation
  • ISO 4049:2019 Dentistry — Polymer-based restorative materials

U.S. Air Force, mesh polymer

AENOR, mesh polymer

  • UNE 53963:2011 IN Plastics. Cellular flexible polymeric materials. Tolerances on the nominal value of polyurethane (PUR) conglomerate foams characteristics.
  • UNE 53982:2000 Plastics. Cellular flexible polymeric materials. Identification of eter or ester of a polyurethane (PUR) foam.
  • UNE-EN ISO 10066:1998 FLEXIBLE CELLULAR POLYMERIC MATERIALS. DETERMINATION OF CREEP IN COMPRESSION. (ISO 10066:1991).
  • UNE-EN ISO 1856:2001 Flexible cellular polymeric materials - Determination of compression set. (ISO 1856:2000)
  • UNE 53987:2000 Plastics. Cellular flexible polymeric materials. Determination of adhesion of polyurethane foam sheets to different substrates.
  • UNE 53170:2002 Cellular polymeric flexible materials. Determination of static fatigue at constant deformation.
  • UNE 53211:2002 Cellular polymeric flexible materials. Determination of static fatigue at constant force.
  • UNE-EN 13676:2002 Polymer coated paper and board intended for food contact - Detection of pinholes.
  • UNE-EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
  • UNE-EN ISO 2440:2001 FLEXIBLE AND RIGID CELLULAR POLYMERIC MATERIALS. ACELERATED AGEING TESTS. (ISO 2440:1997)
  • UNE-EN ISO 3385:2014 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding (ISO 3385:2014)
  • UNE-EN ISO 1798:2008 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008)
  • UNE-EN ISO 1856:2001/A1:2007 Flexible cellular polymeric materials - Determination of compression set - Amendment 1 (ISO 1856:2000/Amd 1:2007)
  • UNE-EN 13632:2010 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
  • UNE-EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013)
  • UNE-EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013)
  • UNE-EN ISO 2440:2001/A1:2010 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 1 (ISO 2440:1997/Amd 1:2010)
  • UNE-EN ISO 2440:2001/A2:2014 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 2 (ISO 2440:1997/AMD 2:2014)

GM North America, mesh polymer

Japanese Industrial Standards Committee (JISC), mesh polymer

  • JIS K 6400-9:2018 Flexible cellular polymeric materials -- Part 9: Determination of antibacterial effectiveness
  • JIS K 6400-1:2004 Flexible cellular polymeric materials -- Determination of physical properties -- Part 1: General rules
  • JIS K 6400-3:2004 Flexible cellular polymeric materials -- Determination of physical properties -- Part 3: Resilience
  • JIS K 6400-7:2004 Flexible cellular polymeric materials -- Determination of physical properties -- Part 7: Air permeability
  • JIS T 6506:1998 Synthetic polymer teeth
  • JIS T 6506:2005 Synthetic polymer teeth
  • JIS K 6401:2006 Polymeric materials, cellular flexible -- Polyurethane foam for load-bearing applications -- Specification
  • JIS K 6231:1998 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method
  • JIS K 6400-6:2004 Flexible cellular polymeric materials -- Determination of physical properties -- Part 6: Burning characteristics
  • JIS A 6008:2022 Roofing sheets of synthetic polymer
  • JIS K 7229:1995 Determination of chlorine in chlorine-containing polymers, copolymers and their compounds
  • JIS K 6400-3:2011 Flexible cellular polymeric materials -- Physical properties -- Part 3: Determination of resilience by ball rebound
  • JIS K 6400-7:2012 Flexible cellular polymeric materials-physical properties -- Part 7: Determination of air flow value
  • JIS K 6400-8:2014 Flexible cellular polymeric materials -- Physical properties -- Part 8: Determination of heat ageing properties
  • JIS K 6231:2004 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method
  • JIS A 6008:2002 Roofing sheets of synthetic polymer
  • JIS A 6203:1996 Polymer dispersions and redispersible polymer powders for cement modifiers
  • JIS A 6203:2000 Polymer dispersions and redispersible polymer powders for cement modifiers
  • JIS A 6203:2015 Polymer dispersions and redispersible polymer powders for cement modifiers
  • JIS K 6400-4:2004 Flexible cellular polymeric materials -- Determination of physical properties -- Part 4: Compression set and fatigue characteristics
  • JIS K 6740:1976 Designation of rigid polyvinyl chloride compounds
  • JIS K 6723:1995 Plasticized polyvinyl chloride compounds

Professional Standard - Construction Industry, mesh polymer

  • JGJ 337-2015 Technical specification for strengthening of building structures with steel stranded wire mesh and polymer mortar

AT-ON, mesh polymer

BELST, mesh polymer

Professional Standard - Petrochemical Industry, mesh polymer

  • SH/T 1764.1-2008 Rubber.Analysis by pyrolytic gas-chromatographic methods.Part 1:Identification of polymers(single polymers and polymer blends)
  • SH/T 1501-2001 Synthetic rubber latex - Preparation of dry polymer

Institute of Electrical and Electronics Engineers (IEEE), mesh polymer

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., mesh polymer

ZA-SANS, mesh polymer

United States Navy, mesh polymer

Military Standard of the People's Republic of China-General Armament Department, mesh polymer

  • GJB 2320-1995 Specification for polyurethane microcellular foam coated fabrics
  • GJB 2320A-2021 Specification for polyurethane microcellular foam coated fabrics

Canadian General Standards Board （CGSB), mesh polymer

U.S. Military Regulations and Norms, mesh polymer

ES-AENOR, mesh polymer

Standard Association of Australia （SAA）, mesh polymer

HU-MSZT, mesh polymer

US-FCR, mesh polymer

American Concrete Institute, mesh polymer

Professional Standard - Medicine, mesh polymer

RO-ASRO, mesh polymer

  • STAS 5904-1968
  • STAS R 12729-1989 PLASTICS Symbols for synthetic polymers
  • STAS 11476-1981 UNWOVEN TEXTILE MATERIALS OF COTTON, MIXTURES NATURAL AND SYNTHETIC POLYMERES ND POLYMER MIXTURES inimum colour and printing fastness
  • SR ISO 305:1995 Plastics - Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compourids - Discoloration method
  • STAS 7397-1973 POLYVINYL CHLORIDE TYPE GE

国家食品药品监督管理局, mesh polymer

  • YY/T 0661-2017 Standard specification for virgin poly(L-lactic acid) resin for surgical implants

Taiwan Provincial Standard of the People's Republic of China, mesh polymer

PL-PKN, mesh polymer

  • PN C89102-1973 Polymeres Oefinitions of ?erms
  • PN C89061-1987 Homopolymer and copolymer resins of styrene Determination of residual monomers and compounds don't underego polymerisation by gas chromatographic method
  • PN E04421-1990 Measurement of the average viscometric degree of polymerization of new and aged electrical papers
  • PN C05068-1992 Synthetic latices Preparation of dry polymer
  • PN C89299-1991 Plastics. Unplasticized compounds of homopolymers and copolymers of vinyl chloride. Designation
  • PN C04229-1974 Rubber Calculating of rubber polymer content

工业和信息化部, mesh polymer

ES-UNE, mesh polymer

  • UNE-EN ISO 8067:2019 Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:2018)
  • UNE-EN ISO 1856:2019 Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2018)
  • UNE-EN ISO 8307:2019 Flexible cellular polymeric materials - Determination of resilience by ball rebound (ISO 8307:2018)
  • UNE-EN ISO 2440:2020 Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2019)

GM Europe, mesh polymer

  • GME QK 000577-1988 Polymerblend aus Polypropylen und EPDM Polyblend from Polypropylene and EPDM English/German
  • GME QK 001226-2002 Blend aus Polyamid 66, Polyamid 6 und Polyethylen Blend from Polyamide 66, Polyamide 6 and Polyethylene English/German
  • GME QK 001807-2003 Blend von Propylen-Ethylen-Copolomerisat und EPDM Blend from Polypropylene-Ethylene-Copolymer and EPDM
  • GME QK 000732-2010 Liquid Crystalline Polymer (English/German)

AASHTO - American Association of State Highway and Transportation Officials, mesh polymer

  • T 302-2004 Standard Method of Test for Polymer Content of Polymer-Modified Emulsions and Asphalt Binders
  • T302-1994 Standard Method of Test for Polymer Content of Polymer Modified Emulsions (Nineteenth Edition)
  • T302-1995 Standard Method of Test for Polymer Content of Polymer Modified Emulsions (Eighteenth Edition)

Professional Standard - Petroleum, mesh polymer

Society of Automotive Engineers (SAE), mesh polymer

Institute of Interconnecting and Packaging Electronic Circuits (IPC), mesh polymer

ACI - American Concrete Institute, mesh polymer

Canadian Standards Association (CSA), mesh polymer

国家能源局, mesh polymer

BE-NBN, mesh polymer

  • NBN T 46-003-1983 Polymeric materials, cellular flexible - Détermination of hardness (indentation technique)

The American Road & Transportation Builders Association, mesh polymer

  • AASHTO T 302-2005 Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders
  • AASHTO T302-1999 Standard Method of Test for Polymer Content of Polymer-Modified Emulsions Twentieth Edition

CEN - European Committee for Standardization, mesh polymer

  • EN ISO 305:2019 Plastics - Determination of thermal stability of poly(vinyl chloride)@ related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method

Professional Standard - Building Materials, mesh polymer

  • JC 561.2-2006 Glass fiber reinforcing mesh Part 2: Glass fiber reinforcing mesh for class PB EIFS
  • JC/T 561.2-2006 Glass fiber reinforcing mesh Part 2:Glass fiber reinforcing mesh for class PB EIFS
  • JC/T 894-2001 Polymer modified cementitious waterproofing coating
  • JC/T 984-2005 Polymer modified cement mortars for waterproof
  • JC/T 2090-2011 Polymer modified cement slurry for waterproof
  • JC/T 984-2011 Polymer modified cement mortar for waterproof

国家发展和改革委员会, mesh polymer

  • JC 561.2-2005 Reinforced fiberglass mesh Part 2: Fiberglass mesh for polymer-based exterior wall insulation

TR-TSE, mesh polymer

  • TS 2330-1976 PLASTICS - AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS - DETERMINATION OF WHITE POINT TEMPERATURE
  • TS 1886-1975 PLASTICS AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS DETERMINATION OF DRY SOLIDS CONTENT AT 105° C

IT-UNI, mesh polymer

SE-SIS, mesh polymer

国家市场监督管理总局、中国国家标准化管理委员会, mesh polymer

  • GB/T 8013.3-2018 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 3: Organic polymer coatings

CU-NC, mesh polymer

IN-BIS, mesh polymer

SAE - SAE International, mesh polymer

  mesh polymer, petroleum polymer, polymer adhesive, polymer standard, Mesh diameter, polymer testing, polymer film, epipolymer, polymer system, polymer testing, polymer product, mesh hole, Mesh, Mesh mesh, Mesh mesh, Standard mesh, Standard mesh, metal mesh, metal mesh, Wire Mesh Aperture.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved