ZH
RU
ES
Three-point bending test of coated materials
Three-point bending test of coated materials, Total:61 items.
In the international standard classification, Three-point bending test of coated materials involves: Paints and varnishes, Inorganic chemicals, Refractories, Plastics, Road vehicle systems, Welding, brazing and soldering, Products of the textile industry, Construction materials, Materials for aerospace construction, Rubber and plastics products, Insulating materials, Reinforced plastics, Ceramics, Waxes, bituminous materials and other petroleum products, Semiconductor devices, Raw materials for rubber and plastics, Products of the chemical industry.
RU-GOST R, Three-point bending test of coated materials
- GOST 6806-1973 Paint and lacquer materials. Method for determination of film elasticity in bending
- GOST IEC 60811-504-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 504. Mechanical tests. Bending tests at low temperature for insulation and sheaths
German Institute for Standardization, Three-point bending test of coated materials
- DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
- DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
- DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
- DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
- DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 51944 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigendum to DIN 51944:1999-01
- DIN EN 13892-2:2003-02 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength; German version EN 13892-2:2002
- DIN EN 658-5:2003-03 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002
- DIN 51944 Corrigendum 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Soild materials Corrigendum 1 to English version of DIN 51944:1999-01
- DIN EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020); German version EN ISO 22751:2020
国家市场监督管理总局、中国国家标准化管理委员会, Three-point bending test of coated materials
- GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
American Society for Testing and Materials (ASTM), Three-point bending test of coated materials
- ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
- ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
- ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
Society of Automotive Engineers (SAE), Three-point bending test of coated materials
- SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
- SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
British Standards Institution (BSI), Three-point bending test of coated materials
- BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
- 18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
- BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
- BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
- BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- BS IEC 62047-31:2019 Semiconductor devices. Micro-electromechanical devices - Four-point bending test method for interfacial adhesion energy of layered MEMS materials
- BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method
International Organization for Standardization (ISO), Three-point bending test of coated materials
- ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
- ISO 22751:2020 Rubber- or plastic-coated fabrics — Physical and mechanical test — Determination of bending force
CH-SNV, Three-point bending test of coated materials
KR-KS, Three-point bending test of coated materials
- KS K 0855-2018(2023) Test method of resistance to damage by flexing for rubber or plastics coated fabric
Malaysia Standards, Three-point bending test of coated materials
- MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Three-point bending test of coated materials
- PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)
European Committee for Standardization (CEN), Three-point bending test of coated materials
- EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
IT-UNI, Three-point bending test of coated materials
- UNI EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force
Japanese Industrial Standards Committee (JISC), Three-point bending test of coated materials
- JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
AT-ON, Three-point bending test of coated materials
- OENORM EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
Lithuanian Standards Office , Three-point bending test of coated materials
- LST EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
- LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
PL-PKN, Three-point bending test of coated materials
- PN-EN ISO 22751-2021-03 E Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
Danish Standards Foundation, Three-point bending test of coated materials
- DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
- DS/ENV 658-5:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)
ES-UNE, Three-point bending test of coated materials
- UNE-EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) (Endorsed by AENOR in February of 2003.)
International Electrotechnical Commission (IEC), Three-point bending test of coated materials
- IEC 62047-31:2019 Semiconductor devices - Micro-electromechanical devices - Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials
Association Francaise de Normalisation, Three-point bending test of coated materials
- NF B43-205*NF EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5 : determination of interlaminar shear strength by short span bend test (three points).
Aerospace, Security and Defence Industries Association of Europe (ASD), Three-point bending test of coated materials
- ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)
NL-NEN, Three-point bending test of coated materials
- NVN-ENV 658-5-1994 Advanced technical ceramics. Mechanical properties for ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)