ZH
RU
ES
Solvent peak too high
Solvent peak too high, Total:84 items.
In the international standard classification, Solvent peak too high involves: Organic chemicals, Waxes, bituminous materials and other petroleum products, Products of the chemical industry, Space systems and operations, Equipment for the rubber and plastics industries, Paints and varnishes, Analytical chemistry, Vocabularies, Protection of and in buildings, Protection against fire, Paint ingredients, Fertilizers, Materials and articles in contact with foodstuffs.
Society of Automotive Engineers (SAE), Solvent peak too high
SAE - SAE International, Solvent peak too high
Indonesia Standards, Solvent peak too high
Canadian General Standards Board （CGSB), Solvent peak too high
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Solvent peak too high
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Solvent peak too high
British Standards Institution (BSI), Solvent peak too high
- PD ISO/TR 18147:2014 Space environment (natural and artificial). Method of the solar energetic protons fluences and peak fluxes determination
- BS PD ISO/TR 18147:2014 Space environment (natural and artificial). Method of the solar energetic protons fluences and peak fluxes determination
- BS EN 14981:2006 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
(U.S.) Ford Automotive Standards, Solvent peak too high
- FORD M3C19-A-1982 HONING OIL AND HIGH FLASH SOLVENT
- FORD ESB-M4G31-A2-1984 SEALER, BUTYL - SOLVENT TYPE - HIGH VISCOSITY - PUMPABLE
- FORD M14J218-A-1990 SOLVENT, SAFETY - HIGH FLASH NAPHTHA
- FORD WSK-M4G245-B3-2002 SEALER, POLYURETHANE, SOLVENT RELEASE, AIR DRYING, HIGH TEMPERATURE STORAGE STABILITY
- FORD WSB-M4G344-A-1993 SEALER, BUTYL, HIGH VISCOSITY, EXTRUDABLE, NON-SOLVENT TYPE, DISPERSIBLE CARRIER
- FORD ESB-M6J120-D-2008 PRIMER SURFACER, LOW BAKE EPOXY - HIGH SOLIDS - TAUPE - EXEMPT SOLVENT (10% REACTIVE) ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M7C80-A2-2008 RUST PREVENTIVE, WAX, SOLVENT BASED, UNDERBODY PROTECTION, HIGH SOLID CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M2G329-A-2007 ADHESIVE, EPOXY, SOLVENT FREE, 180 DEGREES C CURING 80 DEGREES C APPLICABLE, METAL/METAL, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2G114-A-2003 ADHESIVE, NITRILE BASE - FAST TACK - SOLVENT RELEASE TYPE - HIGH VISCOSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M2G112-A
- FORD WSK-M7C80-A2-2015 RUST PREVENTIVE, WAX, SOLVENT BASED, UNDERBODY PROTECTION, HIGH SOLID CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M7C79-A2-2015 CAVITY WAX, HIGH SOLID, SOLVENT BASED, 85% SOLIDS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M7C79-A)
- FORD WSK-M2G329-A2-2007 ADHESIVE, EPOXY, SOLVENT FREE, 180 DEGREES C CURING, 80 DEGREES C APPLICABLE, METAL/METAL, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2G329-A)
- FORD WSK-M2G329-A3-2007 ADHESIVE, EPOXY, SOLVENT FREE, 180 DEGREES C CURING 60 DEGREES C APPLICABLE, METAL/METAL, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P-1111A*** (Shown on WSK-M2G329-A)
Korean Agency for Technology and Standards (KATS), Solvent peak too high
International Organization for Standardization (ISO), Solvent peak too high
- ISO/TR 18147:2014 Space environment (natural and artificial) - Method of the solar energetic protons fluences and peak fluxes determination
- ISO 7203-2:1995 Fire extinguishing media - Foam concentrates - Part 2: Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids
American National Standards Institute （ANSI), Solvent peak too high
- ANSI/ASTM D2604:1986 Specification for High-Boiling Hydrocarbon Solvent for Preparing Oil-Borne Preservative Solutions
Japanese Industrial Standards Committee (JISC), Solvent peak too high
Guangdong Provincial Standard of the People's Republic of China, Solvent peak too high
Group Standards of the People's Republic of China, Solvent peak too high
- T/ZZB 1887-2020 Solvent-based high solid floor coatings
- T/CNCIA 01001-2016 High solid solvent borne automotive coatings
- T/QGCML 186-2021 Polymer solvent-free spraying elastomer waterproof coating
- T/CNCIA 01005-2022 Technical requirement for low VOCs content high solid/ultra high solid and solvent-free epoxy coatings
- T/CNCIA 01005-2018 Definition of low VOCs content high solids, ultra high solids and solvent-free epoxy coating
API - American Petroleum Institute, Solvent peak too high
AENOR, Solvent peak too high
- UNE 30148:1960 ANALYSIS REAGENTS. PERCHLORIC ACID (SOLUTION TO 70%).
- UNE-EN 14981:2007 Surface active agents. Determination of content of high boiling solvents in liquid detergents by GLC
- UNE 48316:2014 Paint and varnishes. High performance corrosion resistance decorative solvent-borne coatings
- UNE 53199:2015 Plastics. Polymeric materials, cellular flexible. Determination of solvents swelling
- UNE 55539-9:1994 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTION TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 9: SOLUTION OF POTASSIUM PERMANGANATE, OF CONCENTRATION 0,02
- UNE 55539-12:1995 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 12: ACETOUS SOLUTION OF PERCHLORIC ACID, OF CONCENTRATION 0
GM North America, Solvent peak too high
- GM 9984810-2015 High Bake Adhesion Promoter - Solventborne for TPO (Issue 6)
- GM 9984222-1988 Sealer - High Bake, Sprayable, Paintable, for Waterborne BC and Solventborne CC Systems
- GM 9984238-1988 Sealer - Low Bake, Sprayable, Paintable for Waterborne BC and Solventborne CC Systems
- GM 9981432-2000 Sealer High Bake, Paintable, Thumbgrade Plastisol
- GM 9984221-2000 Sealer - High Bake, Sprayable, Paintable, for Solventborne BC and CC Systems
- GM 9981494-2000 Sealer High Bake, Paintable, Pumpable, General Body Plastisol
- GM 9984864-2013 Topcoat System, High Bake, 1K Solventborne Basecoat/Matte Finish (Low Gloss), 2K Clearcoat (Issue 3)
Danish Standards Foundation, Solvent peak too high
- DS/EN 14981:2007 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
Lithuanian Standards Office , Solvent peak too high
- LST EN 14981-2006 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
TR-TSE, Solvent peak too high
- TS 3552-1981 HEAT OR SOLVENT BONDING ENAMELLED ROUND COPPER WIRES WITH HIGH MECHANICAL PROPERTIES
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Solvent peak too high
- GJB 5871-2006 Specification for high-temperature endurance insulating solventless varnishes used for aviation electrical engines
Association Francaise de Normalisation, Solvent peak too high
- NF T73-295*NF EN 14981:2007 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC.
- NF EN 14981:2007 Agents de surface - Détermination de la teneur en solvants à point d'ébullition élevé dans les détergents liquides par chromatographie en phase gazeuse
- NF U42-212:1969 Fertilizers. Blast furnace slag. Extraction of phosphoric anhydride soluble in citric acid reagent.
- NF T70-319:1995 Energetic materials for defense. Physical-chemical analysis and properties. Double extraction of high explosives with solvent.
- NF T70-325:1995 Energetic materials for defense. Physical-chemical analysis and properties. Acidity or alcalinity of high explosives. Method by dissolution and indicator.
- XP M07-113:2003 Produits pétroliers - Détermination de la teneur en traceur Solvent Yellow 124 dans les distillats moyens - Méthode par chromatographie liquide à haute performance avec détection par spectrophotométrie UV-Visible
Taiwan Provincial Standard of the People's Republic of China, Solvent peak too high
- CNS 8595-1982 Determination of the Digment Content of Solvent - Type Paints by High Speed Centrifuging
ES-UNE, Solvent peak too high
- UNE 48316:2020 Paint and varnishes. High performance corrosion resistance decorative solvent-borne coatings
European Committee for Standardization (CEN), Solvent peak too high
- EN 14981:2006 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
- CEN EN 1568-2-2008_ Fire extinguishing media - Foam concentrates - Part 2:
Specification for high expansion foam concentrates for surface
application to water-immiscible liquids
German Institute for Standardization, Solvent peak too high
- DIN EN 14981:2006 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC; English version of DIN EN 14981:2006-12
- DIN EN 14981:2006-12 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC; German version EN 14981:2006
Professional Standard - Commodity Inspection, Solvent peak too high
- SN/T 2448-2010 Determination of water-soluble colorants in lipsticks-High performance liquid chromatography
- SN/T 2936-2011 Determination of phenols preservatives in coatings for import and export.High performance liquid chromatography
- SN/T 3180-2012 Food contact materials.Polymers.Determination of residual solvent in plastic film.Gas chromatography
American Society for Testing and Materials (ASTM), Solvent peak too high
- ASTM D2698-05(2010) Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
- ASTM D2698-90(1999) Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
- ASTM D2698-05(2022) Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
- ASTM D2698-05(2015) Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
- ASTM D2698-05 Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
YU-JUS, Solvent peak too high
- JUS H.G8.486-1991 Reagents. Potassium permanganate. Determination of substances insoluble in water. Gravimetric metho?
- JUS H.G8.136-1984 Reagents. Ammonia solution. Determination of permanganate reducing substances content. Volumetric ethod
Professional Standard - Hygiene , Solvent peak too high
- WS/T 170-1999 Workplace air.Determination of aniline.Solvent desorption high performance liquid chromatographic method
Malaysia Standards, Solvent peak too high
GOSTR, Solvent peak too high
- GOST 34258-2017 Veterinary preparation, feed additive. Method for determination of water-soluble vitamins content by high performance liquid chromatography with spectrophotometric detection
- GOST R 57748-2017 Composite polymers. Method for in situ determination of polymer network parameters of cross-linked ultra high molecular weight polyethylene in solvent
ZA-SANS, Solvent peak too high
- SANS 7203-2:2007 Fire extinguishing media - Foam concentrates Part 2: Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids