ZH
RU
ES
d-peak of graphene
d-peak of graphene, Total:86 items.
In the international standard classification, d-peak of graphene involves: Test conditions and procedures in general, Textile fibres, Physics. Chemistry, Materials for the reinforcement of composites, Paints and varnishes, Products of the textile industry, Fruits. Vegetables, Farming and forestry, TESTING, Petroleum products in general, Electrical and electronic testing, Analytical chemistry, Optics and optical measurements, Organic chemicals, Metrology and measurement in general, Materials for aerospace construction, Water quality.
British Standards Institution (BSI), d-peak of graphene
- BS PD ISO/TS 21356-1:2021 Nanotechnologies. Structural characterization of graphene. Graphene from powders and dispersions
- PD CEN ISO/TS 21356-1:2022 Nanotechnologies. Structural characterization of graphene. Graphene from powders and dispersions
- BS PAS 1201:2018 Properties of graphene flakes. Guide
- 18/30376981 DC PD IEC/TS 62607-6-11. Nanomanufacturing. Key control characteristics. Part 6-11. Graphene. Defect level of graphene analysed by Raman spectroscopy
- PD ISO/TR 19733:2019 Nanotechnologies. Matrix of properties and measurement techniques for graphene and related two-dimensional (2D) materials
Group Standards of the People's Republic of China, d-peak of graphene
- T/ZGIA 005-2021 Graphene Test Method for Determination of Graphene-Based Materials in Composite Fibers Nylon
- T/ZGIA 003-2020 Graphene Test Method for Determination of Graphene-Based Materials in Composite Fibers Polyester
- T/GDASE 0011-2020 Determination of conductivity of graphene powder
- T/GDASE 0007-2020 Determination of thermal conductivity of graphene powder
- T/GDASE 0010-2020 Determination of Electron Mobility in Graphene Thin Films
- T/CGIA 002-2018 Guidance on naming of products containing graphene materials
- T/CGIA 011-2019 Test method of iodine adsorption number for graphene materials
- T/GDASE 0009-2020 Determination of the content of carbon, hydrogen, oxygen, nitrogen and sulfur in graphene
- T/CSTM 00229-2020 Identification of graphene materials in coatings materials Scanning Electron Microscope-Energy Dispersive Spectrometer method
- T/CNTAC 21-2018 Test method for identification of graphene materials in fibres– Transmission electron microscope (TEM) method
- T/CNTAC 70-2020 Quantitative detection for graphene materials in fibers - Elemental analysis method
- T/GDASE 0008-2020 Determination of Young's modulus of graphene film
- T/ZGIA 001-2019 Graphene test method for the determination of powder conductivity four-probe method
- T/CGIA 013-2019 Determination of silicon content in graphene materials — Molybdenum blue spectrophotometry
- T/ZSA 39-2020 Characterization of Graphene - Work function - Ultraviolet photoelectron spectroscopy (UPS) method
- T/ZGIA 002-2020 Graphene Test Methods Determination of Work Function Ultraviolet Photoelectron Spectroscopy
- T/GDASE 0012-2020 Determination of Layer Number of Graphene Films by Laser Microscopy Confocal Raman Spectroscopy
- T/GDASE 0013-2020 Determination of Defect Degree in Graphene Powder by Laser Microscopy Confocal Raman Spectroscopy
- T/CGIA 012-2019 Determination of metallic elements in graphene materials — Inductively coupled plasma emission spectrometry
- T/SPSTS 013-2019 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
- T/CSTM 00340-2020 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
CZ-CSN, d-peak of graphene
International Organization for Standardization (ISO), d-peak of graphene
- ISO/TS 21356-1:2021 Nanotechnologies - Structural characterization of graphene - Part 1: Graphene from powders and dispersions
German Institute for Standardization, d-peak of graphene
- DIN CEN ISO/TS 21356-1:2022-08 Nanotechnologies - Structural characterization of graphene - Part 1: Graphene from powders and dispersions (ISO/TS 21356-1:2021); German version CEN ISO/TS 21356-1:2022
- DIN EN 62565-3-1:2014-11 Nanomanufacturing - Material specifications - Part 3-1: Graphene - Blank detail specification for electrotechnical applications (IEC 113/217/CD:2014) / Note: Date of issue 2014-10-17
- DIN 38405-35:2004-09 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 35: Determination of arsenic - Method by graphite furnace atomic absorption spectrometry (GF-AAS) (D 35)
- DIN 38405-35:2004 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 35: Determination of arsenic - Method by graphite furnace atomic absorption spectrometry (GF-AAS) (D 35)
ES-UNE, d-peak of graphene
- UNE-CEN ISO/TS 21356-1:2022 Nanotechnologies - Structural characterization of graphene - Part 1: Graphene from powders and dispersions (ISO/TS 21356-1:2021) (Endorsed by Asociación Española de Normalización in May of 2022.)
Association Francaise de Normalisation, d-peak of graphene
- XP CEN ISO/TS 21356-1:2022 Nanotechnologies - Caractérisation structurelle du graphène - Partie 1 : graphène issu de poudres et de dispersions
- XP T16-226-1*XP CEN ISO/TS 21356-1:2022 Nanotechnologies - Structural characterization of graphene - Part 1 : graphene from powders and dispersions
- FD T16-406*FD ISO/TR 19733:2019 Nanotechnologies - Matrix of properties and measurement techniques for graphene and related two-dimensional (2D) materials
- FD ISO/TR 19733:2019 Nanotechnologies - Matrice des propriétés et des techniques de mesure pour le graphène et autres matériaux bidimensionnels (2D)
Hebei Provincial Standard of the People's Republic of China, d-peak of graphene
- DB13/T 5255-2020 Determination of square resistance of graphene conductive ink by four-probe method
- DB13/T 2768.1-2018 Graphene powder material test method part 1: Determination of ash content
- DB13/T 2768.3-2018 Graphene powder material testing method Part 3: Determination of electrical conductivity
- DB13/T 2768.5-2018 Graphene powder material testing method Part 5: Determination of thermal diffusivity flash method
- DB13/T 2768.2-2018 Graphene powder material detection method part 2: Determination of carbon, nitrogen, hydrogen, sulfur, oxygen element content
- DB13/T 5025.1-2019 Determination method of graphene-carbon nanotube composite conductive paste Part 1: Determination of solid content
- DB13/T 5025.2-2019 Determination method of graphene-carbon nanotube composite conductive paste Part 2: Determination of moisture content
- DB13/T 5025.3-2019 Determination method of graphene-carbon nanotube composite conductive paste Part 3: Determination of magnetic foreign matter content
- DB13/T 5026.2-2019 Determination of physical properties of graphene conductive paste Part 2: Determination of paste fineness by scraper fineness meter method
- DB13/T 5026.1-2019 Determination of physical properties of graphene conductive paste Part 1: Determination of paste viscosity rotational viscometer method
- DB13/T 5026.3-2019 Method for Determination of Physical Properties of Graphene Conductive Paste Part 3: Four-probe Method for Determination of Electrode Resistivity of Paste
American Society for Testing and Materials (ASTM), d-peak of graphene
- ASTM E3220-20 Standard Guide for Characterization of Graphene Flakes
- ASTM D1159-01 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
European Committee for Standardization (CEN), d-peak of graphene
- FprCEN ISO/TS 21356-1:2021 Nanotechnologies - Structural characterization of graphene - Part 1: Graphene from powders and dispersions (ISO/TS 21356-1:2021)
- CEN ISO/TS 21356-1:2022 Nanotechnologies - Structural characterization of graphene - Part 1: Graphene from powders and dispersions (ISO/TS 21356-1:2021)
Guangxi Provincial Standard of the People's Republic of China, d-peak of graphene
- DB45/T 1423-2016 Detection and characterization methods of graphene three-dimensional structure powder materials
- DB45/T 1424-2016 Specifications for the design of high-temperature reaction furnaces for the production of graphene three-dimensional structure powder materials
Jiangsu Provincial Standard of the People's Republic of China, d-peak of graphene
- DB32/T 4379-2022 Determination of Fourier Transform Infrared Spectrum of Graphene Oxide Material
- DB32/T 3596-2019 Determination of thermal diffusivity and thermal conductivity of graphene materials by flash method
- DB32/T 3595-2019 Elemental analyzer method for the determination of carbon, hydrogen, nitrogen, sulfur and oxygen content in graphene materials
(U.S.) Ford Automotive Standards, d-peak of graphene
- FORD ESA-M4D375-A-2005 POLYTETRAFLUOROETHYLENE - 10% GRAPHITE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESA-M4D375-A-2009 POLYTETRAFLUOROETHYLENE - 10% GRAPHITE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
国家市场监督管理总局、中国国家标准化管理委员会, d-peak of graphene
- GB/Z 38062-2019 Nanotechnologies—Determination of specific surface area of graphene materials—Methylene blue adsorption method
- GB/T 40069-2021 Nanotechnologies—Measurement of the number of layers of graphene-related two-dimensional (2D) materials—Raman spectroscopy method
- GB/T 40071-2021 Nanotechnologies—Measurement of the number of layers of graphene-related two-dimensional (2D) materials—Optical contrast method
- GB/T 38114-2019 Nanotechnologies—Quantitative analysis of the surface oxygen functional groups on graphene materials—Chemical titration method
- GB/T 41067-2021 Nanotechnologies—Determination of sulfur, fluorine, chlorine and bromine content in graphene flakes—Combustion ion chromatography method
- GB/T 41068-2021 Nanotechnologies—Determination of water-soluble anions content in graphene powder—Ion chromatography method
BR-ABNT, d-peak of graphene
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, d-peak of graphene
- GB/T 7717.16-2009 Acrylonitrile for industrial use-Part 16:Determination of content of iron-Graphite furnace atomic absorption spectrometer method
- GB/T 7717.17-2009 Acrylonitrile for industrial use-Part 17:Determination of content of copper-Graphite furnace atomic absorption spectrometer method
- GB/T 42310-2023 Determination of specific surface area of nanotechnology graphene powder by argon adsorption static capacity method
- GB/T 42240-2022 Nanotechnology—Measurement of metallic impurities in graphene powder—Inductively coupled plasma mass spectrometry
Society of Automotive Engineers (SAE), d-peak of graphene
- SAE AMS3678/7-2006 Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite
- SAE AMS3670/3B-2004 Polyamide-Imide Bar, Rod, and Shapes, 12% Graphite - 3% Polytetrafluoroethylene Filled
- SAE AMS3670/2B-1992 Polyamide-Imide Bar, Rod, and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled
- SAE AMS3670/3B-1995 Polyamide-Imide Bar, Rod, and Shapes 12% Graphite - 3% Polytetrafluoroethylene Filled
- SAE AMS3678/7A-2010 Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite
- SAE AMS3670/3C-2021 Bar, Rod, and Shapes Produced from 12% Graphite - 3% Polytetrafluoroethylene (PTFE) Filled Polyamide-Imide (PAI) Material
- SAE AMS3670/2C-2021 Molded or Extruded Bar, Rod, and Shapes Produced from 20% Graphite – 3% Polytetrafluoroethylene (PTFE) Filled Polyamide-Imide (PAI) Material
Guangdong Provincial Standard of the People's Republic of China, d-peak of graphene
- DB44/T 1216-2013 Characterization of graphene using scanning electron microscopy and X-ray spectroscopy
SAE - SAE International, d-peak of graphene
- SAE AMS3678/7B-2016 Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite
PH-BPS, d-peak of graphene
- PNS ISO/TR 19733:2021 Nanotechnologies - Matrix of properties and measurement techniques for graphene and related two-dimensional (2D) materials
未注明发布机构, d-peak of graphene
- SAE AMS3670/2B-2006 Polyamide-Imide Bar, Rod, and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled
KR-KS, d-peak of graphene
- KS C ISO TR 19733-2023 Nanotechnologies — Matrix of properties and measurement techniques for graphene and related two-dimensional(2D) materials
- KS C IEC TS 62607-6-4-2022 Nanomanufacturing — Key control characteristics — Part 6-4: Graphene — Surface conductance measurement using resonant cavity
GOSTR, d-peak of graphene
- PNST 500-2020 Nanotechnologies. Part 13. Graphene and two dimensional (2D) materials based on it. Terms and definitions
海关总署, d-peak of graphene
- SN/T 1690.3-2019 New Textile Fiber Composition Analysis Method Part 3: Qualitative Identification of Graphene Modified Fibers
Korean Agency for Technology and Standards (KATS), d-peak of graphene
- KS C IEC TS 62607-6-4:2022 Nanomanufacturing — Key control characteristics — Part 6-4: Graphene — Surface conductance measurement using resonant cavity