ZH
RU
ES
swing six
swing six, Total:102 items.
In the international standard classification, swing six involves: Components for aerospace construction, Terminology (principles and coordination), Pharmaceutics, Equipment for entertainment, Commercial vehicles, Lifting equipment, Elements of buildings, Woodworking equipment, Equipment for children, Protection against fire, Shipbuilding and marine structures in general, Testing of metals, Road vehicles in general, Protection of and in buildings, Plastics, Road engineering, Semiconducting materials, Valves, Environmental testing, Continuous handling equipment, Mining equipment, Standardization. General rules, Cutting tools, Sports equipment and facilities, Iron and steel products.
CZ-CSN, swing six
Professional Standard - Aviation, swing six
Group Standards of the People's Republic of China, swing six
- T/HNZB 10-2023 Square Shaker
- T/CPARK 8-2020 Technical specification for electric anti-sway control system of bridge type crane
- T/IAWBS 017-2022 Test method for full width at half maximum of double crystal X-rayrocking curve of diamond single crystal substrate
- T/IAWBS 015-2021 Test method for full width at half maximum of double crystal X-ray rocking curve of Ga2O3 single crystal substrate
- T/IAWBS 016-2022 X-ray double crystal rocking curve FWHM test method for silicon carbide single wafer
Professional Standard - Machinery, swing six
Professional Standard - Medicine, swing six
ES-AENOR, swing six
CU-NC, swing six
- NC 90-09-06-1984 Metrological Assurance. Hardness Measurement Means According to Rockwell and Super Rockwell National Transmission Scheme
- NC 18-65-1986 Passenger and Goods Transportation. Rolling Parts for Passenger Wagons. General Design Specifications
- NC 18-74-1987 Public and Goods Transport. Railroad Rolling Equipment. Classification according to Forces Transmitted to the Way
- NC 09-04-80-1987 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Machining DeVice. Rocking Arm. Design Specifications
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, swing six
- GB/T 34519-2017 Specifications of amusement device kiddie rocking category
- GB/T 34612-2017 Measurement method for X-ray double crystal diffraction rocking curve of sapphire crystals
Society of Automotive Engineers (SAE), swing six
GM Europe, swing six
SAE - SAE International, swing six
Association of German Mechanical Engineers, swing six
National Metrological Technical Specifications of the People's Republic of China, swing six
- JJF 1870-2020 Calibration Specification for Inclinations and Swings Test Equipments
HU-MSZT, swing six
Military Standard of the People's Republic of China-General Armament Department, swing six
- GJB 9790-2020 Specification for rocking bellows for rocket engines
- GJB 150.23-1991 Military Equipment Environmental Test Methods Tilt and Swing Test
American Society for Testing and Materials (ASTM), swing six
- ASTM F900-94(2000) Standard Specification for Industrial and Commercial Swing Gates
- ASTM F900-11(2017) Standard Specification for Industrial and Commercial Steel Swing Gates
- ASTM F3084-20 Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers
- ASTM F3084-18 Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers
AT-ON, swing six
- ONORM B 4014-1-1993 Design loads on structures — Static wind loads (non-sway structures)
- ONORM B 4014-2-1994 Design loads on structures — Dynamic wind actions (sway structures)
- ONORM B 4014-1/AC1-1998 Design loads on structures - Static wind loads (non-sway structures) (Corrigendum)
- ONORM B 4014-1 Beib.1-1993 Design loads on structures - Static wind loads (non-sway structures) - Examples of calculation Calcul des charges dans la construction -Action statique du vent
IN-BIS, swing six
Canadian General Standards Board （CGSB), swing six
PL-PKN, swing six
RU-GOST R, swing six
- GOST 29158-1991 Woodworking machines. Mortising machines with oscillating tool action. Nomenclature
- GOST R 52167-2003 Children's playgrounds equipment. Swing's safety of structure and test methods. General requirements
- GOST 30630.1.7-2013 Mechanical environment stability test methods for machines instruments and other industrial products. Test methods for influence of shocks by free fall, shocks by drop on account of topple, influence of rocking and prolonged pitches
- GOST R 52299-2004 Children's playground equipment. Rocking equipment safety of structure and test methods. General requirements
Hebei Provincial Standard of the People's Republic of China, swing six
- DB13/T 5469-2021 Calibration method of tilt and roll test bench for electromechanical equipment
Taiwan Provincial Standard of the People's Republic of China, swing six
- CNS 12927-1991 65mm Portable Fire Water Driven Automatic Oscillating Fire Monitor
Danish Standards Foundation, swing six
- DS/EN 13115:2001 Windows - Classification of mechanical properties - Racking, torsion and operating forces
- DS/EN 1176-6:2009 Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
Lithuanian Standards Office , swing six
- LST EN 13115-2002 Windows - Classification of mechanical properties - Racking, torsion and operating forces
- LST EN 13115-2020 Windows - Classification of mechanical properties - Racking, torsion and operating forces
- LST EN 1176-6-2008 Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
RO-ASRO, swing six
- STAS 12887-1990 Woodworking machines. Swing, double automatic breast drills. Accuracy specifications
Professional Standard-Ships, swing six
- CB 1146.8-1996 Guidelines for Environmental Testing and Engineering of Ship Equipment Tilting and Rolling
AENOR, swing six
- UNE-EN 13115:2001 Windows - Classification of mechanical properties - Racking, torsion and operating forces.
Henan Provincial Standard of the People's Republic of China, swing six
- DB41/T 1533-2018 Technical specification for electric anti-sway control system of bridge type crane
Professional Standard - Ocean, swing six
- HY 016.14-1992 Basic environmental test methods for marine instruments Tilt and roll tests
- HY 21.10-1992 Guidelines for basic environmental test methods for marine instruments tilt and roll tests
Professional Standard - Aquaculture, swing six
- SC/T 7002.11-1991 Environmental test conditions and methods for marine electronic equipment Tilt and swing
Professional Standard - Agriculture, swing six
- SC/T 7002.11-1992 Environmental test conditions and methods for marine electronic equipment-tilting and swaying
British Standards Institution (BSI), swing six
- BS ISO 13674-2:2006 Road vehicles - Test method for the quantification of on-centre handling - Transition test
- BS 7932:2003 Determination of the unpolished and polished pendulum test value of surfacing units
- BS EN 1176-6:1998 Playground equipment - Additional specific safety requirements and test methods for rocking equipment
- BS EN 1176-6:2017 Playground equipment and surfacing. Additional specific safety requirements and test methods for rocking equipment
- BS EN 1176-6:2008 Playground equipment and surfacing - Additional specific safety requirements and test methods for rocking equipment
American National Standards Institute （ANSI), swing six
Standard Association of Australia （SAA）, swing six
German Institute for Standardization, swing six
- DIN EN ISO 6721-2:2008 Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:2008); English version of DIN EN ISO 6721-2:2008-09
- DIN EN 1870-12:2010 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines; German version EN 1870-12:2003+A1:2009
- DIN EN 1176-6:2017 Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
- DIN EN 1176-6:2019-05 Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment; German version EN 1176-6:2017+AC:2019
International Organization for Standardization (ISO), swing six
- ISO 13674-1:2003 Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test
- ISO 2139:1975 Continuous mechanical handling equipment for loose bulk materials; Oscillating conveyors and shaking or reciprocating feeders with tubular trough
ESDU - Engineering Sciences Data Unit, swing six
- ESDU 82019-2011 Undamped natural vibration of rectangular sway frame buildings and frame structures
- ESDU 82019-1982 Undamped natural vibration of rectangular sway frame buildings and frame structures
American Water Works Association (AWWA), swing six
- AWWA C508-2001 Swing-Check Valves for Waterworks Service, 2-in. Through 24-in. (50-mm Through 600-mm) NPS
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, swing six
- GB/T 2423.31-1985 Basic environmental testing procedures for electric and electronic products--Test:inclinations and motions
- GB/T 2424.20-1985 Basic environmental testing procedures for electric and electronic products--Guidance for test simulating inclinations and motions
- GB/T 32188-2015 Test method for full width at half maximum of double crystal X-ray rocking curve of GaN single crystal substrate
- GB/T 2423.101-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings
Underwriters Laboratories (UL), swing six
- UL 203A-2015 UL Standard for Safety Sway Brace Devices for Sprinkler System Piping (First Edition)
Professional Standard - Geology, swing six
- DZ 28.7-1984 Basic environmental test conditions and methods for geological instrument products Tilt and swing test
- DZ 0039.8-1992 Basic environmental test conditions and methods for geological instrument products Tilt and swing test
VDI - Verein Deutscher Ingenieure, swing six
- VDI 2130-1959 Ebene Kurbelgetriebe; Konstruktion von Kurbelschwingen zur Umwandlung einer umlaufenden Bewegung in eine Schwingbewegung
Korean Agency for Technology and Standards (KATS), swing six
- KS G ISO 8124-4:2015 Safety of toys - Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use
- KS G ISO 8124-4:2020 Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use
- KS T ISO 2139:2006 Continuous mechanical handling equipment for loose bulk materials－Oscillating conveyors and shaking or reciprocating feeders with tubular trough
- KS G 5756-6-2004(2009) Playground equipment－Part 6：Additional specific safety requirement and test methods for rocking equipment
KR-KS, swing six
- KS G ISO 8124-4-2020 Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use
未注明发布机构, swing six
- GJB 150.23A-2009 Military Equipment Laboratory Environmental Test Methods Part 23: Tilt and Swing Tests
- BS EN 1176-6:2017(2019) Playground equipment and surfacing Part 6 : Additional specific safety requirements and test methods for rocking equipment
Japanese Industrial Standards Committee (JISC), swing six
- JIS R 6211-15:1999 Bonded abrasive products -- Dimensions -- Part 15: Grinding wheels for cutting-off on cutting-off machines or swing frame machines
FI-SFS, swing six
Association Francaise de Normalisation, swing six
- NF H95-621*NF ISO 2139:2014 Continuous mechanical handling equipment for loose bulk materials - Oscillating conveyors and shaking or reciprocating feeders with tubular trough
- NF S54-201-6:2008 Playground equipment and surfacing - Part 6 : additional specific safety requirements and test methods for rocking equipment.
TR-TSE, swing six
- TS 1939-1975 CONTINUOUS MECHANICAL HANDLING EQUIPMENT FOR UNIT LOADS SUSPENDED SWING-TRAY CONVEYORS AND FIXED-TRAY CONVEYORS- SAFETY CODE
European Association of Aerospace Industries, swing six
- AECMA PREN 4540-2001 Aerospace Series Bearings, Spherical Plain, in Corrosion Resisting Steel with Self-Lubricating Liner Elevated Load under Low Oscillations Technical Specification Edition P 1
ES-UNE, swing six
- UNE-EN 1176-6:2018+AC:2019 Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment