ZH
RU
ES
Dipping method
Dipping method, Total:85 items.
In the international standard classification, Dipping method involves: Wood technology processes, Geology. Meteorology. Hydrology, Surface treatment and coating, Products of the chemical industry, Water quality, Analytical chemistry, Paints and varnishes, Products of the textile industry, Plastics, Construction materials, Materials for aerospace construction, Nuclear energy engineering, Acoustics and acoustic measurements, Pesticides and other agrochemicals, Paper and board, Medical equipment, Rubber and plastics products, Corrosion of metals, Pipeline components and pipelines, Inorganic chemicals.
NL-NEN, Dipping method
General Motors Corporation (GM), Dipping method
IPC - Association Connecting Electronics Industries, Dipping method
RU-GOST R, Dipping method
Military Standard of the People's Republic of China-General Armament Department, Dipping method
- GJB 1961A-2018 Specification for impregnated military weather balloons
GM North America, Dipping method
- GM 9984090-2014 Zinc Phosphate Conversion Coating - Immersion (Issue 6)
- GM GM9098P-1988 Compatibility of Lubricating Grease with Elastomers by Immersion
Professional Standard - Meteorology, Dipping method
- QX/T 222-2013 Meteorological balloons.Natural rubber latex balloon manufactured by immersion method
American Society for Testing and Materials (ASTM), Dipping method
- ASTM D870-97 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
- ASTM D870-02 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
- ASTM D870-09 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
- ASTM E1068-85(2003) Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
- ASTM E664/E664M-10 Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
- ASTM E664-93(2005) Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
- ASTM D870-15 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
- ASTM E1068-85(2009) Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
- ASTM G44-99 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution
- ASTM G44-99(2005) Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution
- ASTM D2152-95(2003) Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
- ASTM D2152-95 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
- ASTM D2152-95(2010) Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
- ASTM D2152-13 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
- ASTM D2152-17 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
- ASTM D2152-23 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
Association Francaise de Normalisation, Dipping method
- NF T73-420*NF EN 1772:2000 Surface active agents - Determination of wetting power by immersion.
- NF T60-170:1994 Temporary anticorrosion products. Assessment of the covering capacity by dipping.
- NF L17-459*NF EN 2378:1996 Aerospace series. Fibre reinforced plastics. Determination of water absorption by immersion.
- NF C20-745/A1*NF EN 60068-2-45/A1:1994 Environmental testing. Part 2 : tests. Test Xa and guidance : immersion in cleaning solvents
- NF Q03-042:1971 Paper and board tests. Corrugated board. Method for determination of water resistance of the glue bond (immersion method).
- NF L16-106:1990 Aerospace industry. Paints and varnishes. Determination of the water resistance. Method by immersion in de-ionized water.
- NF T51-037-1*NF EN ISO 1183-1:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 1 : immersion method, liquid pycnometer method and titration method
- NF T30-053-1:2007 Paints and varnishes - Determination of resistance to liquids - Part 1 : immersion in liquids other than water.
- NF EN ISO 1183-1:2019 Plastiques - Méthodes de détermination de la masse volumique des plastiques non alvéolaires - Partie 1 : méthode par immersion, méthode du pycnomètre en milieu liquide et méthode par titrage
- NF X41-525-2:2005 Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 2 : application by impregnation (Laboratory method).
Danish Standards Foundation, Dipping method
- DS/EN 1772:2001 Surface active agents - Determination of wetting power by immersion
- DS/EN ISO 15148:2003 Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion
- DS/EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
- DS/EN 20-2:1994 Wood preservatives-Determination of the protective effectiveness against Lyctus brunneus(Stephens)-Part 2:Application by impregnation (laboratory method)
- DS/EN 49-2:1994 Wood preservatives-Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival-Part 2:Application by impregnation (Laboratory method)
Taiwan Provincial Standard of the People's Republic of China, Dipping method
- CNS 8303-1982 Method of Test for n - Hexane Extract in Waste Water Solution Method
- CNS 3562-2000 Method of Test for Immersion of Vulcanized Rubber
(U.S.) Ford Automotive Standards, Dipping method
British Standards Institution (BSI), Dipping method
- BS EN ISO 2812-2:2007 Paints and varnishes - Determination of resistance to liquids - Water immersion method
- BS EN ISO 1183-1:2019 Plastics. Methods for determining the density of non-cellular plastics. Immersion method, liquid pycnometer method and titration method
- BS EN ISO 1183-1:2004 Plastics - Methods for determining the density of non-cellular plastics - Immersion method, liquid pyknometer method and titration method
- BS EN ISO 1183-1:2012 Plastics. Methods for determining the density of non-cellular plastics. Immersion method, liquid pyknometer method and titration method
- BS EN 20-2:1993 Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Application by impregnation (laboratory method)
- BS EN 49-2:2005 Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Application by impregnation (laboratory method)
- BS EN 49-2:2015 Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Application by impregnation (Laboratory method)
Group Standards of the People's Republic of China, Dipping method
- T/CSTM 00517-2022 Textiles-Determination for water or sweat permeation spot-Steeping method
Korean Agency for Technology and Standards (KATS), Dipping method
- KS M 3818-2011 Plastics－Determination of environmental stress cracking(ESC)－Ball or pin impression method
- KS M ISO 1183-1-2014(2019) Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
- KS M ISO 1183-1:2014 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
Lithuanian Standards Office , Dipping method
- LST EN 1772-2002 Surface active agents - Determination of wetting power by immersion (ISO 8022:1990 modified)
- LST EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
German Institute for Standardization, Dipping method
- DIN EN 12087:2007 Thermal insulating products for building applications - Determination of long term water absorption by immersion(includes Amendment A1-2006);English version of DIN EN 12087:2007-06
- DIN EN 1609:2007 Thermal insulating products for building applications - Determination of dimensional short term water absorption by partial immersion(includes Amendment A1:2006); English version of DIN EN 1609:2007-06
- DIN 58356-11:1997 Membrane filter elements - Part 11: Determination of non volatile extractable components by soaking procedure
- DIN EN ISO 1183-1:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)
- DIN 51918:1999 Testing of carbonaceous materials - Determination of bulk density by buoyancy method and the open porosity by impregnation with water - Solid materials
European Committee for Standardization (CEN), Dipping method
- EN 1772:2000 Surface active agents - Determination of wetting power by immersion (ISO 8022:1990, modified)
- EN ISO 15148:2002 Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion ISO 15148: 2002
- EN 20-2:1993 Wood preservatives; determination of the protective effectiveness against Lyctus brunneus (Stephens); part 2: application by impregnation (laboratory method)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Dipping method
- GB/T 11927-1989 Uranium dioxide pellets--Determination of density and amount of open porosity--Penetration immersion method
- GB 11927-1989 Determination of density and open porosity of uranium dioxide pellets by liquid immersion method
- GB/T 1033.1-2008 Plastics.Methods for determining density of non-celluar plastics.Part1:Immersion method,liquid pyknometer method and titration method
The American Road & Transportation Builders Association, Dipping method
- AASHTO TP 77-2009 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
Professional Standard - Agriculture, Dipping method
- NY/T 1154.11-2008 Guideline for laboratory bioassay of pesticides.Part 11: Rice stemdipping method
- NY/T 1154.12-2008 Guideline for laboratory bioassay of pesticides.Part 12: Slide-dip method immersion
- NY/T 1154.5-2006 Pesticides guidelines for laboratory bioactivity tests Part 5:The dipping test for insecticide ovicidal activity
International Organization for Standardization (ISO), Dipping method
- ISO/CD 1183-1:1969 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
- ISO 1183-1:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
- ISO 1183-1:2019 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
Japanese Industrial Standards Committee (JISC), Dipping method
- JIS K 7112-1:2023 Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
VN-TCVN, Dipping method
- TCVN 6039-1-2008 Plastics.Methods for determining the density of non-cellular plastics.Part 1: Immersion method, liquid pyknometer method and titration method
- TCVN 6039-1-2015 Plastics - Methods for determining the density of non-cellular plastics .Part 1:Immersion method,liquid pyknometer method and titration method
ES-UNE, Dipping method
- UNE-EN ISO 1183-1:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)
AENOR, Dipping method
- UNE-EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
Professional Standard - Petrochemical Industry, Dipping method
- SH/T 0025-1999 Rust preventive oils-Test method of salt water immersion
中国石油化工总公司, Dipping method
SE-SIS, Dipping method
- SIS SS-ISO 9278:1992 Uranium dioxide pellets — Determination of density and amount of open and closed porosity — Boiling water method and penetration immersion method