ZH
RU
ES
Instantaneous brightness
Instantaneous brightness, Total:456 items.
In the international standard classification, Instantaneous brightness involves: Energy and heat transfer engineering in general, Construction materials, Lighting, Paints and varnishes, Lamps and related equipment, Optics and optical measurements, Paper and board, Pulps, Optical equipment, Electrical accessories, Electrical and electronic testing, Aids for disabled or handicapped persons, Ergonomics, Shipbuilding and marine structures in general, Road vehicle systems, Printed circuits and boards, Cinematography, Electromagnetic compatibility (EMC), Electronic display devices, Buildings, Non-metalliferous minerals, Fuels, Products of non-ferrous metals, Astronomy. Geodesy. Geography, Medical equipment, Electricity. Magnetism. Electrical and magnetic measurements, Nuclear energy engineering, Road engineering, Electronic tubes, Television and radio broadcasting, Measurement of volume, mass, density, viscosity, Semiconductor devices, Optoelectronics. Laser equipment, Non-destructive testing, Document imaging applications, Plastics, On-board equipment and instruments, Occupational safety. Industrial hygiene, Vibrations, shock and vibration measurements, Metrology and measurement in general, Audio, video and audiovisual engineering, Industrial automation systems, Integrated circuits. Microelectronics, Paper products, Non-ferrous metals, Adhesives, Paint ingredients, Electromechanical components for electronic and telecommunications equipment, Electrical engineering in general, Ferrous metals, Applications of information technology, Surface treatment and coating, Rubber and plastics products, HEALTH CARE TECHNOLOGY.
National Metrological Verification Regulations of the People's Republic of China, Instantaneous brightness
- JJG 211-2021 Luminance Meters
- JJG 211-2005 Luminance Meter
- JJG 941-1998 Fluorescent Luminance Meter
- JJG 211-1989 Verification Regulation of Luminance Meter
- JJG 554-1988 Verification Regulation of Chromatic Luminance Meter
- JJG 2033-1989 Verification Scheme of Measuring Instruments for Luminance
- JJG 941-2009 Verification Regulation of Fluoresent Luminance Meter
- JJG 383-2002 Verification Regulation of Spectral Radiance Standard Lamps
- JJG 2083-1990 Verification Scheme of Measuring Instruments for Spectral Radiance and Irradiance
- JJG 2083-2005 Spectral radiance, spectral irradiance measuring instrument verification system table
International Commission on Illumination (CIE), Instantaneous brightness
- CIE 78-1988 Brightness Luminance Relations: Classified Bibliography (E)
- CIE Pub.30-2-1982 Calculation and measurement of luminance and illuminance in road lighting. Computer program for luminance, illuminance and glare
- CIE 244-2021 Characterization of Imaging Luminance Measurement Devices (ILMDs)
- CIE Pub.69-1987 Methods of characterizing illuminance meters and luminance meters. Performance, characteristics and specifications
- CIE 75-1988 Spectral Luminous Efficiency Functions Based Upon Brightness Matching for Monochromatic Point Sources 2 Degree and 10 Degree Fields (E)
- CIE 61-1984 Tunnel Entrance Lighting: A Survey of Fundamentals for Determining the Luminance in the Threshold Zone (E)
- CIE 212-2014 Guidance towards Best Practice in Psychophysical Procedures Used when Measuring Relative Spatial Brightness
- CIE 110-1994 Spatial Distribution of Daylight - Luminance Distributions of Various Reference Skies (CIE 110.1-1995 Revision 1)
- CIE 76-1988 Intercomparison on Measurement of (Total) Spectral Radiance Factor of Luminescent Specimens (1st Edition) (Reprint 1990) (E)
Sichuan Provincial Standard of the People's Republic of China, Instantaneous brightness
RO-ASRO, Instantaneous brightness
- STAS SR 13212-1995 Measurement methods' for luminance and determination of medium luminance
- STAS 11200/56-1978 GRAPHICAL SYMBOL FOR BRIGHTNESS ; BRILLIANCE
- STAS 6082-1970 PRINTING INKS Determination of colour intensity
- STAS 6000/3-1987 Wooden furniture CLEAR AND OPAQUE FINISH Adhesion Uetermination to base of film
- STAS 11480-1988 Cinematography SCREEN LUMINANCE FOR THE PROJECTION IN INDOOR THEATRES
- STAS 9106-1971 MEASUREMENT OF THE SCREEN LUMINANCE OF MICROCOPY READES
- STAS 6000/10-1986 Wooden furniture CLEAR AND OPAQUE FINISH Determination of specular gloss of the film
- STAS 8916-1971 SAFETY RUBBER FOOT WEAR Determination of the flexiblily and lightness
- STAS 6000/2-1970 Furnituvc CLEAR AND OPAQUE F1NISHES Method of testing finishcd surface rcsistance to dry heat
- STAS 6000/9-1977 WOODEN FURN1TURE CLEAR AND OPAQUE FINISH Determination of resistance of the film to natural light
- STAS R 11621-1981 Artificiol lighting METHOD OF DETERMINATION FOR AVERAGED ILLUMINANCE OF ENCLOSED SPACES
- STAS 12572-1987 VIEWING CONDITIONS FOR EVALUATION OF FILMS AND SLIDES FOR TELEVISION Colours, luminances and dimensions
- STAS 6451/2-1978 Psycho-physiological acoustics CALCULATION OF LOUDNESS AND LOUDNESS LEVEL OF SOUNDS Complex method.
- STAS 11232/5-1981 Stabilized power supplies, d.c. outputTEMPERATURE EFFECT, TRANSIENT PERFORMANCE MEASUREMENT, SETTLING EFFECTS Prescription
CU-NC, Instantaneous brightness
- NC 42-15-1968 Brightness in paper and board
- NC 32-36-1987 Paints and Varnishes. Visual Determination of Coating Brightness
- NC 40-02-1967 Method for determining textiles producís fastness. Gray Scale II for the evaluation of migration degree.
- NC 12-04-25-1986 corrosion Protection Standards Systum. Metallic and Non-Metaliic Inorganic Coatings. Brightness Determination
- NC 40-01-1967 Method for determining textiles products fastness. Gray Scale I for the evaluation of color change
Korean Agency for Technology and Standards (KATS), Instantaneous brightness
- KS C 7614-1987 Photometric measurements on incandescent lamps used for photometric standards
- KS B 5627-1999 BRILLIANCY TEST CHARTS FOR PROJECTION LENSES
- KS A ISO CIE 19476:2020 Characterization of the performance of illuminance meters and luminance meters
- KS A ISO 24502:2011 Ergonomics-Accessible design-Specification of age-related luminance contrast for coloured light
- KS A ISO 24502:2014 Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light
- KS V 8862-1999(2009) DIMMERS FOR MARINE INSTRUMENT ILLUMINATION
- KS C 7613-1999 Methods of luminance measurements in lighting fields
- KS C 7613-1982 Methods of luminance measurements in lighting fields
- KS M 7026-1994 Testing method for brightness of paper and pulp by hunter
- KS C 7613-1999(2019) Methods of luminance measurements in lighting fields
- KS B 5627-1989(1994) BRILLIANCY TEST CHARTS FOR PROJECTION LENSES
- KS M 2230-2005(2010) Testing method for luminometer numbers of aviation turbine fuels
- KS A ISO 2910:2018 Cinematography — Screen luminance and chrominance for the projection of film motion pictures
- KS C 8009-1975 Measuring procedures for light intensity distribution of reflectors for lighting fittings
- KS C 8009-1986 Measuring procedures for light intensity distribution of reflectors for lighting fittings
- KS C IEC 61262-3:2003 Medical electrical equipment－Characteristics of electro－optical X－ray image intensifiers－Part 3：Determination of the luminance distribution and luminance non－uniformity
- KS C IEC 61262-3-2003(2018)
- KS A ISO 26431-1:2012 Digital cinema(D-cinema) quality－Part 1：Screen luminance level, chromaticity and uniformity
- KS A ISO 26431-1-2012(2017) Digital cinema(D-cinema) quality－Part 1：Screen luminance level, chromaticity and uniformity
- KS C 7619-1979 Photometric measurement on mirror - condenser lamps for projector
- KS A ISO 26431-1-2012(2022) Digital cinema(D-cinema) quality－Part 1：Screen luminance level, chromaticity and uniformity
- KS A ISO 2910:2003 Cinematography-Screen luminance for the projection of motion-picture prints indoor theatres and review rooms
- KS A ISO 2910:2013 Cinematography — Screen luminance for the projection of motion-picture prints indoor theatres and review rooms
- KS M ISO 2470:2012 Paper, board and pulps－Measurement of diffuse blue reflectance factor(ISO brightness)
- KS M ISO 2470-2006(2011) Paper, board and pulps－Measurement of diffuse blue reflectance factor(ISO brightness)
- KS A ISO 24502-2014(2019) Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light
- KS B 0713-18-2001 Methods for the calibration of vibration and shock pick-ups-Part 18:Testing of transient temperature sensitivity
- KS B ISO 5347-18:2014 Methods for the calibration of vibration and shock pick-ups — Part 18: Testing of transient temperature sensitivity
- KS M ISO 3688:2002 Pulps－Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor(ISO brightness)
- KS M ISO 3688:2017 Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
- KS C 0265-1995 Electromagnetic compatibility-testing and measurement techniques-Electrical fast transient/burst immunity test
- KS B ISO 5347-18-2014(2019) Methods for the calibration of vibration and shock pick-ups — Part 18: Testing of transient temperature sensitivity
- KS A ISO 6035-2011(2016) Cinematography－Viewing conditions for the evaluation of films and slides for television－Colours, luminances and dimensions
- KS A ISO 6035-2011(2021) Cinematography－Viewing conditions for the evaluation of films and slides for television－Colours, luminances and dimensions
- KS A ISO 6035:2011 Cinematography－Viewing conditions for the evaluation of films and slides for television－Colours, luminances and dimensions
HU-MSZT, Instantaneous brightness
Military Standards (MIL-STD), Instantaneous brightness
AENOR, Instantaneous brightness
- UNE 40442:1982 BRIGHTNESS OF NON WOVENS CLOTHS
- UNE-EN 61262-3:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 3: DETERMINATION OF THE LUMINANCE DISTRIBUTION AND LUMINANCE NON-UNIFORMITY.
- UNE 57061:2002 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness).
TH-TISI, Instantaneous brightness
- TIS 2515-2012 Water.borne gloss enamel
- TIS 1353.11-1998 Standard test methods for paper and paper board.part 11: measurement of diffuse blue reflectance factor (iso brightness)
Group Standards of the People's Republic of China, Instantaneous brightness
- T/ZZB 2793-2022 Spectral radiance meter
- T/CPCA 6041-2014 Electronic circuit board for high-brightness LEDs
- T/CPCA 5041-2014 Test methods for electronic circuit board for high-brightness LEDs
- T/ZSA 11-2020 Technical specification for LCD device light curve
- T/CESS 2-2020 Visual ergonomics electrical interface optotype brightness and color
- T/JSCTS 23-2023 Code of practice for vehicle-mounted inspection on coefficient of retroreflected luminance of road markings
- T/SUCA 008.6-2022 Display System Visual Comfort Part 5-1: Maximum Brightness Requirements for Large Displays
- T/ZZB 3092-2023 Medium viscosity α- Ethyl cyanoacrylate instant adhesive for electronic products
- T/GDIIA 001-2020 Luminance Robustness Testing Requirements for Image Recognition Models Based on Convolutional Neural Networks
Professional Standard - Light Industry, Instantaneous brightness
- QB/T 4125-2010 Pulp.Highest limitation of brightness
- QB/T 2260-1996 Methods of measurement for the relative brightness of calcium halophosphate fluorescent powder for lamps
CZ-CSN, Instantaneous brightness
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Instantaneous brightness
- GB/T 8940.2-2002 Pulp-Preparation of laboratory sheets for the measurement of brightness
- GB/T 24999-2010 Paper and board.Highest limitation of brightness
- GB/T 26464-2011 Determination of brightness (whiteness) for paper inorganic pigments
- GB/T 7974-2002 Paper,board and pulp-Measurement of brightness--Diff/Geometry
- GB/T 4645-1994 Screen luminance for the projection of motion-picture prints in indoor theatres and review rooms
- GB/T 4645-2006 Screen luminance for the projection of motion-picture prints in indoor theatres and review rooms
- GB/T 9430-1988 Methods of test of luminance stability for fluorescent display tubes
- GB/T 13823.15-1995 Methods for calibration of vibration and shock pick-ups. Testing of transient temperature sensitivity
- GB/T 21111-2007 Projection in indoor rooms-Classification of transmitting projection screens and measurement of their transmitted luminance levels
- GB/T 21383-2008 Coefficient of initial retroreflected luminance of newly applied pavement marking and test method
- GB/T 14634.1-2002 Test methods of rare earth three-band phosphors for fluorescent lamps--Determination of relative brightness
- GB/T 3789.29-1991 Measurements of the electrical properties of transmitting tubes--Method of measuring the non-linearity in the luminance of the lower frequency
- GB/T 26271-2010 Technology requirements and measurement methods for the coincidence of luminance and color difference signal of terrestrial digital TV receiver equipment
- GB/T 24111-2009 Electrical equipment of industrial machines.Electrical fast transient/burst immunity test specifications
- GB/T 43034.3-2023 Integrated circuit pulse immunity measurements Part 3: Asynchronous transient injection method
- GB/T 24981.2-2010 Test methods of long afterglow phosphors activated by rare earths.Part 2:Determination of relative brightness
- GB/T 17626.4-1998 Electromagnetic compatibility--Testing and measurement techniques--Electrical fast transient/burst immunity test
- GB/T 6833.4-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Power line transient susceptibility test
- GB/T 17626.4-2018 Electromagnetic compatibility－Testing and measurement techniques－Electrical fast transient/burst immunity test
- GB/T 17626.4-2008 Electromagnetic compatibility.Testing and measurement techniques.Electrical fast transient/burst immunity test
- GB/T 19770-2005 Cinematography-Viewing conditions for the evaluation of films and slides for television-Colours,luminances and dimensions
- GB/T 14634.1-2010 Test methods of rare earth three-band phosphors for fluorescent lamps.Part 1:Determination of relative brightness
- GB/T 14598.10-2012 Measuring relays and protetion equipment.Part 22-4:Electrical disturbance tests.Electrical fast transient/burst immunity test
- GB/T 23595.2-2009 Test methods of rare earth yellow phosphor for white LED lamps.Part 2:Determining of relative brightness
Society of Motion Picture and Television Engineers (SMPTE), Instantaneous brightness
- SMPTE RP 12-1997 Screen Luminance for Drive-In Theaters
- SMPTE ST 2080-1-2014 Reference White Luminance Level and Chromaticity for HDTV
- SMPTE RP 98-1995 Measurement of Screen Luminance in Theaters
- SMPTE ST 431-1-2006 D-Cinema Quality - Screen Luminance Level, Chromaticity and Uniformity
- SMPTE 431-1-2006 D-Cinema Quality - Screen Luminance Level, Chromaticity and Uniformity
- SMPTE RP 51-1995 Screen Luminance and Viewing Conditions for 8-mm Review Rooms
- SMPTE RP 2080-2-2014 Measurement and Calibration Procedure for HDTV Display Luminance Levels and Chromaticity (Includes Access to Additional Content)
- SMPTE ST 2086-2014 Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
- SMPTE ST 2086-2018 Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
- SMPTE 196M-2003 Motion-Picture Film - Indoor Theater and Review Room Projection - Screen Luminance and Viewing Conditions
- SMPTE ST 196M-2003 Motion-Picture Film - Indoor Theater and Review Room Projection - Screen Luminance and Viewing Conditions
Taiwan Provincial Standard of the People's Republic of China, Instantaneous brightness
- CNS 10780-1986 Method of Test for Lighting for Traffic Route
- CNS 11101-1986 Method of Test for Electromechanical Switches-Transmittancy (Luminance)
- CNS 13806-1997 Method of Measurement for Emission Wavelength and Luminous Intensity of Epitaxial Wafers of Light Emitting Diodes
- CNS 15089-2007 Method of test for acidity in volatile solvents and chemical intermediates used in paint, varnish, lacquer, and related products
American National Standards Institute （ANSI), Instantaneous brightness
工业和信息化部, Instantaneous brightness
KR-KS, Instantaneous brightness
- KS A ISO CIE 19476-2020 Characterization of the performance of illuminance meters and luminance meters
- KS A ISO 2910-2018(2023) Cinematography — Screen luminance and chrominance for the projection of film motion pictures
- KS A ISO 2910-2018 Cinematography — Screen luminance and chrominance for the projection of film motion pictures
- KS M ISO 3688-2017 Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
British Standards Institution (BSI), Instantaneous brightness
- BS ISO/CIE 19476:2014 Characterization of the performance of illuminance meters and luminance meters
- BS 7920:2005 Luminance meters - Requirements and test methods
- BS ISO 2910:2007 Cinematography - Screen luminance and chrominance for the projection of motion pictures
- BS ISO 2910:2018 Cinematography. Screen luminance and chrominance for the projection of film motion pictures
- BS EN 62326-20:2016 Printed boards. Printed circuit boards for high-brightness LEDs
- BS ISO 19056-1:2015 Microscopes. Definition and measurement of illumination properties. Image brightness and uniformity in bright field microscopy
- BS EN 61262-3:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.. Determination of the luminance distribution and luminance non-uniformity
- BS EN 4706:2019 Aerospace series. LED colour and brightness ranking
- BS ISO 26431-1:2009 Digital cinema (D-cinema) quality. Screen luminance level, chromaticity and uniformity
- BS 6354:1983 Method for measuring the screen luminance, contrast and reflectance of microform readers
- BS ISO 26431-1:2008 Digital cinema (D-cinema) quality - Screen luminance level, chromaticity and uniformity
- BS ISO 20965:2005 Plastics - Determination of the transient extensional viscosity of polymer melts
- 14/30300825 DC BS EN 4706. Aerospace series. LED colour and brightness ranking
- BS DD IEC/TS 62215-2:2007 Integrated circuits - Measurement of impulse immunity - Synchronous transient injection method
- DD IEC/TS 62215-2:2007 Integrated circuits. Measurement of impulse immunity - Synchronous transient injection method
- 20/30406608 DC BS ISO 20965. Plastics. Determination of the transient extensional viscosity of polymer melts
- BS ISO 2470:2000 Paper, board and pulps - Measurement of diffuse blue reflectance factor (ISO brightness)
- BS ISO 20965:2021 Tracked Changes. Plastics. Determination of the transient extensional viscosity of polymer melts
- BS 3143-4:1985 Road danger lamps - Specification for high intensity battery operated beacons
- BS 3143-2:1990 Road danger lamps - Specification for low-intensity battery-operated lamps
- BS 6955-18:1994 Calibration of vibration and shock pick-ups. Method of test for transient temperature sensitivity
- BS ISO 787-17:2002 General methods of test for pigments and extenders - Comparison of lightening power of white pigments
- 21/30434147 DC BS EN IEC 62977-2-11. Electronic displays - Part 2-11. Measurement method of local luminance and uniformity
- BS 5550 SubSec.7.2.6:1991 Cinematography. Production and presentation. Screens and screen luminance. Specification for screen luminance and colour for the projection of motion-picture prints in indoor theatres and review rooms
- BS EN 62215-3:2013 Integrated circuits. Measurement of impulse immunity. Non-synchronous transient injection method
- BS ISO 3688:1999 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
- BS ISO 3688:2000 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
- BS EN ISO 24502:2011 Ergonomics. Accessible design. Specification of age-related luminance contrast for coloured light
- BS EN ISO 24502:2010 Ergonomics. Accessible design. Specification of age-related luminance contrast for coloured light
- 22/30439263 DC BS ISO 2469. Paper, board and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor)
- BS ISO 2470-1:2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Indoor daylight conditions (ISO brightness)
- BS EN 61000-4-4:2004+A1:2010 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrical fast transient/burst immunity test
- BS EN 61000-4-4+A1:2005 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrical fast transient/burst immunity test
International Organization for Standardization (ISO), Instantaneous brightness
- ISO/CIE 19476:2014 Characterization of the performance of illuminance meters and luminance meters
- ISO 2910:2007 Cinematography - Screen luminance and chrominance for the projection of motion pictures
- ISO 3688:1977 Pulps; Measurement of diffuse blue reflectance factor (ISO brightness)
- ISO 19056-1:2015 Microscopes - Definition and measurement of illumination properties - Part 1: Image brightness and uniformity in bright field microscopy
- ISO 2910:2018 Cinematography - Screen luminance and chrominance for the projection of film motion pictures
- ISO 20965:2005 Plastics - Determination of the transient extensional viscosity of polymer melts
- ISO 20965:2021 Plastics - Determination of the transient extensional viscosity of polymer melts
- ISO 7401:1988 Road vehicles; lateral transient response tests methods
- ISO 2470:1973 Paper and board — Measurement of diffuse blue reflectance factor (ISO brightness)
- ISO 2470:1977 Paper and board; Measurement of diffuse blue reflectance factor (ISO brightness)
- ISO 2910:1990 Cinematography; screen luminance for the projection of motion-picture prints in indoor theatres and review rooms
- ISO 2910:1974 Cinematography — Screen luminance for the projection of motion-picture films in indoor theatres
- ISO 26431-1:2008 Digital cinema (D-cinema) quality - Part 1: Screen luminance level, chromaticity and uniformity
- ISO 2470:1999 Paper, board and pulps - Measurement of diffuse blue reflectance factor (ISO brightness)
- ISO 5347-18:1993 Methods for the calibration of vibration and shock pick-ups; part 18: testing of transient temperature sensitivity
- ISO 787-17:1973 General methods of test for pigments - Part XVII: Comparison of lightening power of white pigments
- ISO 3688:1999 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
- ISO 2895:1974 Cinematography — Screen luminance for review room projection of motion-picture film intended for indoor theatres
- ISO 6035:1983 Cinematography; Viewing conditions for the evaluation of films and slides for television; Colours, luminances and dimensions
Indonesia Standards, Instantaneous brightness
- SNI 09-4246-1996 Test method for iluminating power of lamps for motor cycles
- SNI 04-2768-1992 Motor vehicle main lamps, Test method for illumination strength
- SNI 7644-2010 Spatial database oceanographic temperature, salinity, dissolved oxygen, pH, turbidity, and brightness
- SNI 05-2182-1991 Surface-roughness equipment by instan touch type and phases transformation profile methods
- SNI ISO 3688:2014 Pulps – Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
Canadian General Standards Board （CGSB), Instantaneous brightness
National Metrological Technical Specifications of the People's Republic of China, Instantaneous brightness
- JJF 1317-1990 Luminance Reference Operating Specifications
- JJF 1318-1990 Luminance sub-reference operation technical specification
- JJF 1754-2019 Calibration Specification for Deuterium Lamps Spectral Radiance(250 nm～400 nm)
- JJF 1321-1990 Operating Technical Norm of Primary Standard for Spectral Radiance and Irradiance in the Range of 250～2500 nm
- JJF 1322A-1990 Operating Technical Norm of Secondary Standard for Spectral Radiance in the Range of 250～2500 nm
未注明发布机构, Instantaneous brightness
ECIA - Electronic Components Industry Association, Instantaneous brightness
- TEB 24-1981 Effect of Pulse Shape in Raster Dot Alpha-Numeric CRT Presentations on Spot Luminance and Luminance Distribution
Electronic Components, Assemblies and Materials Association, Instantaneous brightness
- ECA TEB 24-1981 Effect of Pulse Shape in Raster Dot Alpha-Numeric CRT Presentations on Spot Luminance and Luminance Distribution
国家市场监督管理总局、中国国家标准化管理委员会, Instantaneous brightness
- GB/T 36617-2018 Digital cinema (D-cinema) quality—Screen luminance level,chromaticity and uniformity
- GB/T 39388-2020 Characterization of the performance of illuminance meters and luminance meters
- GB/T 24999-2018 Paper and board—Highest limitation of D65 brightness
- GB/T 40384-2021 Plastics—Determination of the transient extensional viscosity of polymer melts
- GB/T 24981.2-2020 Test methods of rare earth long afterglow phosphors—Part 2: Determination of afterglow brightness
- GB/T 40277-2021 Paper, board and pulps—Measurement of diffuse blue reflectance factor( ISO brightness)—Indoor daylight conditions
Society of Automotive Engineers (SAE), Instantaneous brightness
VN-TCVN, Instantaneous brightness
- TCVN 5176-1990 Artificial lighting.Method of measuring of luminance
- TCVN 6729-2008 Pulps.Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
International Electrotechnical Commission (IEC), Instantaneous brightness
- IEC 91/926/PAS:2010 Electronic circuit board for high-brightness LEDs
- IEC 60809:2002 Lamps for road vehicles - Dimensional, electrical and luminous requirements
- IEC 91/928/PAS:2010 Test methods for electronic circuit board for high-brightness LEDs
- IEC 60572:1977 Determination of the luminance distribution of electro-optical X-ray image intensifiers
- IEC PAS 62326-20:2011 Printed boards - Part 20: Electronic circuit board for high-brightness LEDs
- IEC 62326-20:2016 Printed boards - Part 20: Printed circuit boards for high-brightness LEDs
- IEC TS 62215-2:2007 Integrated circuits - Measurement of impulse immunity - Part 2: Synchronous transient injection method
- IEC 62215-3:2013 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method
CO-ICONTEC, Instantaneous brightness
Illuminating Engineering Society of North America, Instantaneous brightness
- IESNA LM-37-1997 Determination of Average Luminance for Indoor Luminaires
- IESNA LM-37-2016 IES Approved Method IES Guide for Determination of Average Luminance (Calculated) for Indoor Luminaires
Association Francaise de Normalisation, Instantaneous brightness
- NF EN 13721:2005 Meubles - Évaluation de la luminance lumineuse des surfaces
- NF L55-070*NF EN 4706:2019 Aerospace series - LED colour and brightness ranking
- NF EN 4706:2019 Série aérospatiale - Classement de couleur et brillance des LED
- NF EN 61262-3:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 3 : détermination de la distribution de luminance et de la non-uniformité de luminance
- NF C74-223*NF EN 61262-3:1994 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3 : determination of the luminance distribution and luminance non-uniformity.
- NF G20-030:2020 Textiles - Textiles lumineux - Détermination de l'éclairement énergétique et de la luminance d'étoffes lumineuses
- NF EN 62326-20:2016 Cartes imprimées - Partie 20 : cartes de circuits imprimés destinées aux LED à haute luminosité
- NF C93-707-20*NF EN 62326-20:2016 Printed boards - Part 20 : printed circuit boards for high-brightness LEDs
- NF ETS 300050:1994 Méthodes pour l'étalonnage de capteurs de vibrations et de chocs - Partie 18 : essai de sensibilité de température transitoire.
- NF EN 2591-209:1994 Méthodes pour l'étalonnage de capteurs de vibrations et de chocs - Partie 18 : essai de sensibilité de température transitoire.
- NF EN ISO 24502:2011 Ergonomie - Conception accessible - Spécification du contraste de luminance lié à l'âge pour la lumière colorée
- NF C96-215-3*NF EN 62215-3:2014 Integrated circuits - Measurement of impulse immunity - Part 3 : non-synchronous transient injection method
- NF C95-224:1975 ELECTRONIC TUBES WITH QUALITY CONFORMANCE PROCEDURES IMAGE CONVERTER AND IMAGE INTENSIFIER TUBES PARTICULAR REQUIREMENTS
- NF ISO 2895:1986 Cinématographie - Luminance des écrans de projection dans les salles de vision pour films cinématographiques destinés aux salles d'exploitation
- NF EN 62215-3:2014 Circuits intégrés - Mesure de l'immunité aux impulsions - Partie 3 : méthode d'injection de transitoires non synchrones
- NF X35-403*NF EN ISO 24502:2011 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light
- NF S27-013*NF ISO 2895:1986 Cinematography. Screen luminance for review room projection of motion-picture film intended for indoor theatres.
- E90-350-18:1994 Methods for the calibration of vibration and shock pick-ups. Part 18 : testing of transient temperature sensitivity.
- NF EN 62386-304:2017 Interface d'éclairage adressable numérique - Partie 304 : exigences particulières - Dispositifs d'entrée - Capteur de luminosité
RU-GOST R, Instantaneous brightness
- GOST 25024.4-1985 Character displays. Methods measuring brightness, luminous intensity, irregularity of brightness and irregularity of luminous intensity
- GOST 26824-2010 Buildings and Structures. Methods for measuring the luminance
- GOST 16680-1979 Processed kaolin. Method of brightness measurement
- GOST 21815.4-1986 Image intensifier and image converter tubes. Method of measuring the background brightness
- GOST 26824-1986 Buildings and structures. Methods for measuring the luminance
- GOST 9070-1975 Viscosimeters for determination of relative viscosity of paint and lacquer materials. Specifications
- GOST 19834.2-1974 Semiconductor emitters. Methods for measurement of radiant intensity and radiance
- GOST 21815.3-1986 Image intensifier and image converter tubes. Method of measuring the luminance gain
- GOST R 8.850-2013 State system for ensuring the uniformity of measurements. Characterization of the performance of illuminance meters and brightness meter. General
- GOST R 57260-2016 Construction climatology. Parameters for daylighting calculations according to the distribution of brightness of the sky
- GOST 21815.16-1986 Image intensifier and image converter tubes. Method of measuring the output brightness non- uniformity ratio
- GOST 12491-1967 Cathod-ray tubes for reception. Method of measurement of screen brilliancy
- GOST R 8.665-2009 State system for ensuring the uniformity of measurements. Photo-electric luxmeter and brightness meter. Methods of verification
- GOST 25024.5-1987 Character displays. Methods of measuring inherent brightness contrast and irregularity of inherent brightness contrast
- GOST R ISO 24502-2012 Ergonomics design. Specification of age-related luminance contrast for coloured light
- GOST 16755-1971 Cathode-ray receiver devices. Method for measurement of irregularity fluorescent screen brightness
- GOST 11583-1974 Polimer materials, building and finishing. Methods for the determination of light resistance and uniformity of painting and lightness
SAE - SAE International, Instantaneous brightness
National Electrical Manufacturers Association（NEMA), Instantaneous brightness
- NEMA ANSLG C78.380-2007 Electric Lamps - High Intensity Discharge Lamps, Method of Designation
- NEMA C136.2-2015 Roadway and Area Lighting Equipment - Dielectric Withstand and Electrical Transient Immunity Requirements
- NEMA C82.4-2002 For Lamp Ballasts - Ballasts for High-Intensity-Discharge and Low-Pressure Sodium Lamps (Multiple-Supply Type)
GOSTR, Instantaneous brightness
- GOST 26824-2018 Buildings and structures. Methods for mеаsuring the luminance
- GOST R IEC 62326-20-2019 Printed boards. Part 20. Electronic circuit boards for high-brightness LEDs
- GOST R 58107.3-2018 General use automobile roads lighting. Method of measurement of road surface luminance by mobile way
German Institute for Standardization, Instantaneous brightness
- DIN EN 4706:2019 Aerospace series - LED colour and brightness ranking; German and English version EN 4706:2019
- DIN EN 4706:2019-12 Aerospace series - LED colour and brightness ranking; German and English version EN 4706:2019
- DIN 5032-7:2017-02 Photometry - Part 7: Classification of illuminance meters and luminance meters
- DIN 5032-10:2020-07 Photometry - Part 10: Luminance meters, concepts, characteristics and their designation
- DIN EN 62326-20:2016-12 Printed boards - Part 20: Printed circuit boards for high-brightness LEDs (IEC 62326-20:2016); German version EN 62326-20:2016
- DIN 53778-3:1983 Emulsion paints; determination of contrast ratio and lightness of coatings
- DIN EN 61262-3:1995-09 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994); German version EN 61262-3:1994
- DIN EN ISO 24502:2011-04 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010); German version EN ISO 24502:2010
- DIN 15571-1:1981 Screen luminance for film projection; general requirements to the luminance, main values
- DIN 53163:2017 Pigments and extenders - Determination of lightness of extenders and white pigments in powder form
- DIN 53163:2018-02 Pigments and extenders - Determination of lightness of extenders and white pigments in powder form
- DIN 55603:2003 Testing of pigments - Determination of relative tinting strength and of colour difference on reduction of inorganic pigments using the lightness method
- DIN 53163:2018 Pigments and extenders - Determination of lightness of extenders and white pigments in powder form
- DIN EN 62326-20:2016 Printed boards - Part 20: Printed circuit boards for high-brightness LEDs (IEC 62326-20:2016); German version EN 62326-20:2016
American Society for Testing and Materials (ASTM), Instantaneous brightness
- ASTM B68/B68M-11 Standard Specification for Seamless Copper Tube, Bright Annealed
- ASTM E1135-97(2003) Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
- ASTM E1135-97 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
- ASTM E2073-02 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
- ASTM E2073-00 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
- ASTM E1135-97(2008)e1 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
- ASTM E1135-19 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
- ASTM E1135-12 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
- ASTM E2073-07 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
- ASTM E2073-09 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
- ASTM E2073-19 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
- ASTM E2073-19a Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
- ASTM E2073-10 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
- ASTM D985-97 Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
- ASTM E2630-08 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source
- ASTM F2360-08 Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
- ASTM E2630-08e1 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source
- ASTM E2630-08(2013) Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source
- ASTM F2360-08(2015)e1 Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
- ASTM D985-97(2007) Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
- ASTM D985-97(2002) Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
- ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
- ASTM F2360-04 Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
- ASTM F2771-10 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
- ASTM F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
- ASTM E2832-12(2017) Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
- ASTM E2177-19 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
- ASTM E2177-18 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
- ASTM E2177-01(2009) Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
- ASTM E2176-08 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-Rain)
Military Standard of the People's Republic of China-General Armament Department, Instantaneous brightness
- GJB 6181-2007 The measurement methods of radiance for target and background
- GJB 7956-2012 Measurement method for strength and distribution of submarine echo highlight
PL-PKN, Instantaneous brightness
- PN N84453-1987 Film projection technology Luminance of screens for projection
- PN E04040-05-1986 Photometric and radiometrie measurements Measurenient of reflection factor, transmission factor and luminance factor
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Instantaneous brightness
- IEEE 205-2001 Standard on Television: Measurement of Luminance Signal Levels
- IEEE 618-1984 STANDARD FOR MEASUREMENT OF LUMINANCE SIGNAL-TO- NOISE RATIO IN VIDEO MAGNETIC-TAPE RECORDING SYSTEMS
- IEEE 205-1958 STANDARDS ON TELEVISION: MEASUREMENT OF LUMINANCE SIGNAL LEVELS; CORRECTION - JULY 1958
International Telecommunication Union (ITU), Instantaneous brightness
- ITU-R BT.814-1-1994 Specifications and Alignment Procedures for Setting of Brightness and Contrast of Displays
- ITU-R BT.814-2007 Specifications and alignment procedures for setting of brightness and contrast of displays
- ITU-R BT.814-2-2007 Specifications and alignment procedures for setting of brightness and contrast of displays
- ITU-R BT.814-2 SPANISH-2007 Specifications and alignment procedures for setting of brightness and contrast of displays
- ITU-R BT.814-2 FRENCH-2007 Specifications and alignment procedures for setting of brightness and contrast of displays
Professional Standard - Nuclear Industry, Instantaneous brightness
- EJ/T 924-1995 Transient Analysis of Light Water Reactor Compartment Pressure and Temperature
- EJ/T 1013-1996 Transient Analysis of Light Water Reactor Containment Pressure and Temperature
Japanese Industrial Standards Committee (JISC), Instantaneous brightness
- JIS F 8852:1993 Dimmers for marine instrument illumination
- JIS P 8148:2001 Paper, board and pulps -- Measurement of diffuse blue reflectance factor (ISO brightness)
- JIS G 1235-2:2021 Iron and steel -- Determination of antimony -- Part 2: Spectrophotometric method after extraction of brilliant green complex
- JIS P 8148:2018 Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Indoor daylight conditions (ISO brightness)
Institute of Electrical and Electronics Engineers (IEEE), Instantaneous brightness
- ANSI/IEEE Std 205-1958 IEEE Standards on Television: Measurement of Luminance Signal Levels
- IEEE Std 205-2001 IEEE Standard on Television: Measurement of Luminance Signal Levels
- ST 2080-1:2014 ST 2080-1:2014 - SMPTE Standard - Reference White Luminance Level and Chromaticity for HDTV
- SMPTE RP 98:1995 RP 98:1995 - SMPTE Recommended Practice - Measurement of Screen Luminance in Theaters
- IEEE/ASA C16.31-1959*58 IRE 23.S1 ASA American Standard Method of Measurement of Television Luminance Signal Levels
- ST 431-1:2006 ST 431-1:2006 - SMPTE Standard - D-Cinema Quality — Screen Luminance Level, Chromaticity and Uniformity
- SMPTE RP 12:1997 RP 12:1997 - SMPTE Recommended Practice - Screen Luminance for Drive-In Theaters
- SMPTE ST 431-1:2006 ST 431-1:2006 - SMPTE Standard - D-Cinema Quality — Screen Luminance Level, Chromaticity and Uniformity
- SMPTE RP 2080-2:2014 RP 2080-2:2014 - SMPTE Standard - Measurement and Calibration Procedure for HDTV Display Luminance Levels and Chromaticity
- RP 2080-2:2014 RP 2080-2:2014 - SMPTE Standard - Measurement and Calibration Procedure for HDTV Display Luminance Levels and Chromaticity
- SMPTE RP 51:1995 RP 51:1995 - SMPTE Recommended Practice - Screen Luminance and Viewing Conditions for 8-mm Review Rooms
- IEEE Std 1789-2015 IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers
- SMPTE ST 2086:2018 ST 2086:2018 - SMPTE Standard - Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
- SMPTE ST 2086:2014 ST 2086:2014 - SMPTE Standard - Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
ES-UNE, Instantaneous brightness
- UNE-EN 4706:2019 Aerospace series - LED colour and brightness ranking (Endorsed by Asociación Española de Normalización in August of 2019.)
- UNE-EN 62326-20:2016 Printed boards - Part 20: Printed circuit boards for high-brightness LEDs (Endorsed by AENOR in June of 2016.)
- UNE-EN ISO 24502:2010 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010) (Endorsed by AENOR in February of 2011.)
- UNE-EN 62215-3:2013 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method (Endorsed by AENOR in November of 2013.)
- UNE 199121-4:2016 Road traffic management equipment. Instanteous speed speedometers. Part 4: Functional specifications and applying protocols.
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Instantaneous brightness
- ASHRAE QC-06-008-2006 Transient Temperature Measurements and Characteristics for Temperature Sensors and Energy Wheels
- ASHRAE QC-06-016-2006 An Integrated Zonal Model to Predict Transient Indoor Humidity Distribution
- ASHRAE 4418-2001 Prediction of Skin and Clothing Temperatures Under Thermal Transient Considering Moisture Accumulation in Clothing
- ASHRAE KC-03-13-2-2003 Invertigation of Human Thermal Comfort Under Highly Transient Conditions for Automotive Applications - Part 2: Thermal Sensation Modeling
ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Instantaneous brightness
- ITU-R BT.814-1992 Specifications and Alignment Procedures for Setting of Brightness and Contrast of Displays
- ITU-R BT.814-4-2018 Specifications of PLUGE test signals and alignment procedures for setting of brightness and contrast of displays
- ITU-R BT.814-3-2017 Specifications of PLUGE test signals and alignment procedures for setting of brightness and contrast of displays
ESD - ESD ASSOCIATION, Instantaneous brightness
- SP5.4-2004 Latch-Up Sensitivity Testing of CMOS/BiCMOS Integrated Circuits Transient Latch-up Testing – Component Level Supply Transient Stimulation
- TR5.4-04-2013 Electrostatic Discharge Sensitivity Testing Transient Latch-up Testing
- TR5.4-03-2011 Electrostatic Discharge Sensitivity Testing Latch-Up Sensitivity Testing of CMOS/BiCMOS Integrated Circuits Transient Latch-up Testing – Component Level Supply Transient Stimulation
Danish Standards Foundation, Instantaneous brightness
- DS 5103:1987 Immunity of electrical equipment against conducted transients
- DS/EN 61262-3:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity
- DS/EN ISO 24502:2011 Ergonomics – Accessible design – Specification of age-related luminance contrast for coloured light
GM North America, Instantaneous brightness
- GM GM9105P-1996 Immunity to Conducted Transients EMC - Component Test Procedure
Professional Standard - Traffic, Instantaneous brightness
- JT/T 691-2007 Test method for coefficient of retroreflected luminance of horizontal coatings
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Instantaneous brightness
- GB/T 33877-2017 Non-destructive testing—Test method for comparing the brightness of fluorescent penetrants
Aerospace, Security and Defence Industries Association of Europe (ASD), Instantaneous brightness
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Instantaneous brightness
- PREN 4706-2015 Aerospace series LED colour and brightness ranking (Edition P 1)
- PREN 4706-2017 Aerospace series LED colour and brightness ranking (Edition P 2)
ANS - American Nuclear Society, Instantaneous brightness
- 56.10-1982 Subcompartment Pressure and Temperature Transient Analysis in Light Water Reactors
- 56.4-1983 Pressure and Temperature Transient Analysis for Light Water Reactor Containments
TR-TSE, Instantaneous brightness
- TS 3373-1979 CINEMATOGRAPHY - SCREEN LUMINANCE FOR THE PROJECTION OF MOTION — PICTURE FILMS IN INDOOR THEATRES
- TS 2198-1976 MICROCOPY - MEASUREMENT OF THE SCREENLUMINANCE OF M?CROFILM READERS
U.S. Air Force, Instantaneous brightness
- AIR FORCE MIL-I-27196 C NOTICE 1-1996 INDICATOR, VERTICAL VELOSITY AAU-9/A, INTEGRALLY LIGHTED
- AIR FORCE MIL-I-27196 C-1988 INDICATOR, VERTICAL VELOSITY AAU-9/A, INTEGRALLY LIGHTED
- AIR FORCE MIL-I-38139 C NOTICE 1-1996 INDICATOR, VERTICAL VELOCITY AAU-18/A, INTEGRALLY LIGHTED
- AIR FORCE MIL-I-38139 C (4)-1994 INDICATOR, VERTICAL VELOCITY AAU-18/A, INTEGRALLY LIGHTED
- AIR FORCE MIL-I-38139 C-1978 INDICATOR, VERTICAL VELOCITY AAU-18/A, INTEGRALLY LIGHTED
IN-BIS, Instantaneous brightness
BE-NBN, Instantaneous brightness
Lithuanian Standards Office , Instantaneous brightness
- LST EN 61262-3-2001 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994)
- LST EN ISO 24502:2011 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010)
Professional Standard - Energy, Instantaneous brightness
- NB/T 20403-2017RK Transient analysis of pressure and temperature in pressurized water reactor nuclear power plant compartment
- NB/T 20404-2017RK Transient Analysis of Containment Pressure and Temperature in PWR Nuclear Power Plant
国家能源局, Instantaneous brightness
- NB/T 20403-2017 Transient analysis of pressure and temperature in compartments of pressurized water reactor nuclear power plants
- NB/T 20404-2017 Transient analysis of pressure and temperature of containment of pressurized water reactor nuclear power plant
SE-SIS, Instantaneous brightness
- SIS SS-IEC 809:1991 Lighting equipment - Lamps for road vehicles - Dimensional, electrical and luminous requirements
- SIS SS IEC 572:1986 X-ray equipment - Determination ofthe luminance distribution of electro-optical X-ray image intensifiers
European Committee for Electrotechnical Standardization（CENELEC）, Instantaneous brightness
- HD 511 S1-1988 Determination of the Luminance Distribution of Electro- Optical X- Ray Image Intensifiers
- EN 62326-20:2016 Printed boards - Part 20: Printed circuit boards for high-brightness LEDs
- EN 62215-3:2013 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method
ES-AENOR, Instantaneous brightness
(U.S.) Ford Automotive Standards, Instantaneous brightness
- FORD WSS-M1P96-B1-2011 PLATING, BRIGHT OR LOW GLOSS DECORATIVE STAINLESS STEEL (CHROME FLASH), LEVEL 1 CORROSION ***TO BE USED WITH FORD WSS-M99P1111-A***
Professional Standard - Aerospace, Instantaneous brightness
- QJ 2051-1991 Specifications for transient temperature measurement of structural surfaces in thermal radiation environments
United States Navy, Instantaneous brightness
YU-JUS, Instantaneous brightness
- JUS N.N6.188-1984 Radiocommunications.. Cabled distribution and CATV systems. Methods of measurements. Chromi- nance—luminance gain and delay inequalities
国家广播电视总局, Instantaneous brightness
- GY/T 326-2019 PLUGE test signal specifications and calibration steps for monitor brightness and contrast calibration
Professional Standard - Machinery, Instantaneous brightness
- JB/T 9233.7-1999 General methods of testing the performance of industrial process measurement and control instruments.Transient temperature effect
ESDU - Engineering Sciences Data Unit, Instantaneous brightness
- ESDU 83046 A-2007 Fluid transients in pipes and tunnels. Speed of propagation of pressure waves.
- ESDU 83046-1983 FLUID TRANSIENTS IN PIPES AND TUNNELS Speed of Propagation of Pressure Waves
Professional Standard - Electricity, Instantaneous brightness
- DL/T 2120-2020 Transient Electromagnetic Disturbance Immunity Test of GIS Substation Switch Operation
IEC - International Electrotechnical Commission, Instantaneous brightness
- PAS 62326-20-2011 Printed boards – Part 20: Electronic circuit board for high-brightness LEDs (Edition 1.0)
- TS 62215-2-2007 Integrated circuits – Measurement of impulse immunity – Part 2: Synchronous transient injection method (Edition 1.0)
机械工业部, Instantaneous brightness
- JB/T 8256.3-1995 Test method for screen brightness and contrast of transparent microform readers
Professional Standard - Electron, Instantaneous brightness
- SJ 2974-1988 Detail specification for luminance delay lines for color TV receivers for Type YBL
- SJ/T 9573.1-1995 Quality grading standard for luminance delay lines of color television receivers
- SJ/T 11330-2006 Specification of interfaces for digital television receiving equipment--Part 4: Video interface of S-Video
NEMA - National Electrical Manufacturers Association, Instantaneous brightness
- NEMA C136.2-2018 Roadway and Area Lighting Equipment - Dielectric Withstand and Electrical Transient Immunity Requirements
CEN - European Committee for Standardization, Instantaneous brightness
- EN ISO 787-17:2017 General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments
- EN ISO 787-17:2019 General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments
European Committee for Standardization (CEN), Instantaneous brightness
- EN ISO 24502:2010 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010)
ZA-SANS, Instantaneous brightness
- SANS 6261:2008 Paints and varnishes - Determination of coefficient of retro-reflected luminance by means of a portable retro-reflectometer
Standard Association of Australia （SAA）, Instantaneous brightness
Association for Information and Image Management (AIIM), Instantaneous brightness
- AIIM MS26-1990 35 mm Planetary Cameras (Top-Light) - Procedures for Determining Illumination Uniformity of Microfilming Engineering Drawings Includes Errata and Amendment 1: 1998
Shanghai Provincial Standard of the People's Republic of China, Instantaneous brightness
- DB31/T 708-2013 Maximum visible brightness limits and measurement methods of light-emitting diode (LED) displays in public places