ZH

RU

ES

Infrared Spectrum Peak Intensity

Infrared Spectrum Peak Intensity, Total:96 items.

In the international standard classification, Infrared Spectrum Peak Intensity involves: Optoelectronics. Laser equipment, Road engineering, General methods of tests and analysis for food products, Semiconductor devices, Inorganic chemicals, Cereals, pulses and derived products, Analytical chemistry, Rubber, Pharmaceutics, Air quality, Tobacco, tobacco products and related equipment, Protection against fire, Fuels, Plastics, Lubricants, industrial oils and related products, Nuclear energy engineering, Optics and optical measurements.


Professional Standard - Electron, Infrared Spectrum Peak Intensity

  • SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
  • SJ/T 2658.12-2015 Measuring method for semiconductor infrared-emitting diode.Part 12: Peak-emission wavelength and spectral radiant bandwidth
  • SJ 2658.9-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for the intensity space distribution and half-intensity angle of radiation

Professional Standard - Agriculture, Infrared Spectrum Peak Intensity

Jilin Provincial Standard of the People's Republic of China, Infrared Spectrum Peak Intensity

Group Standards of the People's Republic of China, Infrared Spectrum Peak Intensity

  • T/SATA 054-2023 Etermination of ethanol concentration in wine - Near infrared spectroscopy method
  • T/CIS 11001-2020 On-line detection of powder mixing uniformity in traditional Chinese medicine production process by near-infrared spectroscopy

Professional Standard - Electricity, Infrared Spectrum Peak Intensity

  • DL/T 2410-2021 Determination of Polymerization Degree of Transformer Insulating Paper (Board) (Near Infrared Spectroscopy)

RU-GOST R, Infrared Spectrum Peak Intensity

  • GOST 28326.3-1989 Technical liquid ammonia. Determination of oil mass concentration by method of infra-red spectrometry

Association Francaise de Normalisation, Infrared Spectrum Peak Intensity

  • XP ISO/TS 19021:2019 Méthode pour déterminer les concentrations des gaz émis lors de l'essai ISO 5659-2 par spectroscopie infrarouge à transformée de Fourier
  • NF V03-768:2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels.
  • NF V03-768:2015 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
  • NF V03-768*NF EN 15948:2020 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels
  • NF T43-024*NF ISO 14558:2016 Rubber - Determination of residual unsaturation of hydrogenated nitrile butasiene rubber (HNBR) by infrared spectroscopy
  • NF ISO 14558:2016 Caoutchouc - Détermination de la non-saturation résiduelle du caoutchouc nitrile butadiène hydrogéné (HNBR) par spectroscopie à infrarouge
  • XP CEN/TS 17405:2020 Emissions de sources fixes - Détermination de la concentration volumique en dioxyde de carbone - Méthode de référence : spectrométrie infrarouge
  • XP P92-021*XP ISO/TS 19021:2019 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • NF X21-058:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results.
  • NF X43-065*NF EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • NF EN 14626:2012 Air ambiant - Méthode normalisée de mesurage de la concentration en monoxyde de carbone par spectroscopie à rayonnement infrarouge non dispersif
  • NF X43-374*NF EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method : non-dispersive infrared spectrometry
  • NF EN 15058:2017 Émissions de sources fixes - Détermination de la concentration massique de monoxyde de carbone - Méthode de référence normalisée : spectrométrie infrarouge non dispersive
  • NF X43-374:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method : non-dispersive infrared spectrometry.

German Institute for Standardization, Infrared Spectrum Peak Intensity

  • DIN 65565:1992-10 Aerospace; reinforcement fibres; qualitative testing of size type of carbon filament yarns, woven fabrics and chopped strands by infrared spectroscopy
  • DIN EN 14626:2022-11 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German and English version prEN 14626:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14626 (201...
  • DIN EN 14626:2012-12 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012 / Note: To be replaced by DIN EN 14626 (2022-11).
  • DIN CEN/TS 17405:2020-11 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020
  • DIN CEN/TS 17337:2019-08*DIN SPEC 33981:2019-08 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy; German version CEN/TS 17337:2019
  • DIN EN 15058:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry English version of DIN EN 15058:2006-09
  • DIN EN 15948:2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels; German version EN 15948:2012
  • DIN EN 15948:2015 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels; German version EN 15948:2015
  • DIN EN 15058:2017-05 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry; German version EN 15058:2017
  • DIN CEN/TS 17405:2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020
  • DIN EN 14626:2012 Ambient air.Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012
  • DIN 53383-2:1983 Testing of plastics; testing of oxidation stability by means of ageing in an oven; polyethylene of high density (PE-HD), infra red spectroscopic (IR) determination of the carbonyle content
  • DIN EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry; German version EN 15058:2017

Jiangsu Provincial Standard of the People's Republic of China, Infrared Spectrum Peak Intensity

  • DB32/T 4340-2022 Asphalt Infrared Spectroscopy Similarity Recognition and SBS Content Testing Procedures

British Standards Institution (BSI), Infrared Spectrum Peak Intensity

  • BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
  • 20/30380957 DC BS ISO 23468. Determination of heavy water isotopic purity by Fourier Transform Infrared Spectroscopy
  • BS ISO 22947:2019 Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke with an intense smoking regime. NDIR method
  • BS ISO 14558:2000 Rubber - Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy
  • BS ISO 14558:2016 Rubber. Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy
  • BS EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • BS EN 15058:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: non-dispersive infrared spectrometry
  • BS EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • 22/30450999 DC BS EN 14626. Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • 16/30287218 DC BS ISO 19021. Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • BS ISO 20368:2017 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
  • BS ISO 20903:2019 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
  • BS EN 15058:2017 Tracked Changes. Stationary source emissions. Determination of the mass concentration of carbon monoxide. Standard reference method: non-dispersive infrared spectrometry
  • BS ISO 23468:2021 Reactor technology. Power reactor analyses and measurements. Determination of heavy water isotopic purity by Fourier transform infrared spectroscopy

Professional Standard - Petrochemical Industry, Infrared Spectrum Peak Intensity

  • SH/T 1762-2008 Rubber.Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy

European Committee for Standardization (CEN), Infrared Spectrum Peak Intensity

  • EN 15948:2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
  • CEN/TS 17405:2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
  • EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • CEN/TS 17337:2019 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy
  • EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
  • EN 15058:2006 Stationary source emissions Determination of the mass concentration of carbon monoxide (CO) Reference method: Non-dispersive infrared spectrometry

Korean Agency for Technology and Standards (KATS), Infrared Spectrum Peak Intensity

  • KS M ISO 14558-2017(2022) Rubber — Determination of residual unsaturation of hydrogenated nitrile butadiene rubber(HNBR) by infrared spectroscopy

KR-KS, Infrared Spectrum Peak Intensity

  • KS M ISO 14558-2017 Rubber — Determination of residual unsaturation of hydrogenated nitrile butadiene rubber(HNBR) by infrared spectroscopy

International Organization for Standardization (ISO), Infrared Spectrum Peak Intensity

  • ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
  • ISO 20903:2019 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results
  • ISO/TS 19021:2018 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • ISO 20903:2011 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
  • ISO 20368:2017 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
  • ISO 23468:2021 Reactor technology - Power reactor analyses and measurements - Determination of heavy water isotopic purity by Fourier transform infrared spectroscopy

IT-UNI, Infrared Spectrum Peak Intensity

  • UNI CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry

Lithuanian Standards Office , Infrared Spectrum Peak Intensity

  • LST CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
  • LST EN 14626-2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • LST EN 15058-2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry

国家文物局, Infrared Spectrum Peak Intensity

  • WW/T 0087-2018 Determination of aging degree of silk fabrics in collections using Fourier transform infrared spectroscopic analysis

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Infrared Spectrum Peak Intensity

  • GJB 6238.8-2008 Test method fo effect for special serial bomb. Part 8: Infrared radiation intensity for target flare of aerial target bomb. Spectral analytics method

Danish Standards Foundation, Infrared Spectrum Peak Intensity

  • DS/EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • DS/EN 15058:2006 Stationary source emissions – Determination of the mass concentration of carbon monoxide (CO) – Reference method: Non-dispersive infrared spectrometry

AENOR, Infrared Spectrum Peak Intensity

  • UNE-EN 14626:2013 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • UNE-EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Infrared Spectrum Peak Intensity

  • GB/T 28893-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Methods used to determine peak intensities and information required when reporting results

NL-NEN, Infrared Spectrum Peak Intensity

  • NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry

CEN - European Committee for Standardization, Infrared Spectrum Peak Intensity

  • PD CEN/TS 17337:2019 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy

Professional Standard - Energy, Infrared Spectrum Peak Intensity

  • NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

国家能源局, Infrared Spectrum Peak Intensity

  • SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

PL-PKN, Infrared Spectrum Peak Intensity

  • PN Z04108-04-1988 Air purity protection Tests for oils Determination of li?uid phase of oil in work places by infrared absorption spectrophotometry
  • PN Z04018-02-1991 Air purity protection Tests for free crystalline silica content Determination of free crystalline silica in total dust in work places by infrared absorption spectrophotometry
  • PN Z04018-03-1991 Air purity protection Tests for free crystalline silica content Determination of free crystalline silicain respirable dust in work places by infrared absorption spectrophotomery

AT-ON, Infrared Spectrum Peak Intensity

  • ONR CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry (CEN/TS 17405:2020)

American Society for Testing and Materials (ASTM), Infrared Spectrum Peak Intensity

  • ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM D6122-21 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-20a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-20 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM F2778-09(2015) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
  • ASTM F2778-09(2020) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)

Association of German Mechanical Engineers, Infrared Spectrum Peak Intensity

  • VDI 3861 Blatt 1-1989 Measurement of fibrous particles; manual measurement of asbestos in flowing clean exhaust gas; determination of asbestos mass concentration by IR-spectroscopy




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved