ZH
RU
ES
Air Quality Analysis Equipment
Air Quality Analysis Equipment, Total:300 items.
In the international standard classification, Air Quality Analysis Equipment involves: Air quality, Electricity. Magnetism. Electrical and magnetic measurements, Aerospace electric equipment and systems, Equipment for the chemical industry, Installations in buildings, Geology. Meteorology. Hydrology, Analytical chemistry, Company organization and management, Water quality, Construction industry, Environmental protection, Equipment for petroleum and natural gas industries, Alarm and warning systems, Agricultural machines, implements and equipment, Electrical equipment for working in special conditions, Electrical engineering in general, Medical equipment, Electrical and electronic testing, ELECTRICAL ENGINEERING, Power transmission and distribution networks, Radiocommunications, On-board equipment and instruments, Electronic components in general, Measurement of volume, mass, density, viscosity, Ventilators. Fans. Air-conditioners, Acoustics and acoustic measurements, Heat pumps, Refrigerating technology, IT terminal and other peripheral equipment, Office machines, Metrology and measurement in general, Semiconducting materials, Electromechanical components for electronic and telecommunications equipment, Protective equipment, Linear and angular measurements, Occupational safety. Industrial hygiene.
SE-SIS, Air Quality Analysis Equipment
- SIS SS IEC 528:1984 Electronic measuring equipment - Expression ofperformance of air quality infra-red analyzers
- SIS SS 02 84 13-1980 Workplace atmosphere - Content of lower aldehydes and ketones in air — Volumetric method
- SIS SS IEC 746:1984 Electronic measuring equipment - Expression of performance of electrochemical analyzers
- SIS SS 02 84 21-1990 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Hydrogen peroxide — barium perchlorateIThorin-method
- SIS SS 02 84 25-1991 Air quality — Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Performance characteristics and calibration of automated measuring systems
- SIS SS 02 84 26-1991 Air quality — Stationary source emissions — Determination of concentration and mass flow rate of particulate material in gas-carrying ducts — Manual gravimetric metod
Association Francaise de Normalisation, Air Quality Analysis Equipment
- NF X43-014:2017 Air quality - Ambient air - Determination of total atmospheric deposition - Sampling - Preparation of samples prior analysis
- NF X43-014:2003 Air quality - Ambient air - Determination of total atmospheric deposition - Sampling - Preparation of samples prior analysis.
- NF X43-025:1988 Air quality. Ambient air. Determination of polycyclic aromatic hydrocarbons. High pressure liquid chromatography and gaz chromatography determination.
- NF X20-211:1983 Gas analysis. Preparation of calibration gas mixtures. Mass dynamic method.
- NF X43-023:1991 Air quality. Ambient atmosphere. Measurement of the concentration of particulate matter suspended in the ambient air. Gravimetric method.
- FD X43-404:2022 Air quality - Air of domestic living accomodations and of public premises - Airbone sampling and analysis of the allergens in the indoor environment
- XP X43-059:2007 Ambient air - Determination of crop protection substances (pesticides) in ambient air - Preparation of the collection media - Analysis by chromatographic methods
- NF X43-404:1993 Air quality - Air of domestic living accomodations and of public premises - Airbone sampling and analysis of the allergens of the internal environment
- XP X 43-053-1997 AIR QUALITY. AMBIENT AIR. INSTRUCTION HANDBOOK FOR THE CALIBRATION OF ATMOSPHERIC POLLUANT ANALYZERS AND SAMPLERS. SAMPLING. MEASURING STATION AND GAS FLOW RATES.
- NF X43-215:2018 Qualité de l'air - Air des lieux de travail - Prélèvement et analyse des aérosols semi-volatils - Exigences et méthodes d'essai
- NF X43-252:1991 Air quality. Workplace air. Sampling and analysis of gaseous organic pollutants on charcoal. Pumping sampling.
- NF X43-258:1991 Air quality. Workplace air. Sampling and analysis of gaseous organic pollutants on silicon gel. Sampling by pumping.
- NF X20-205-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7 : thermal mass-flow controllers.
- NF X43-066-2*NF ISO 22262-2:2014 Air quality - Bulk materials - Part 2 : quantitative determination of asbestos by gravimetric and microscopical methods
- FD X43-191:2017 Qualité de l'air - Emissions diffuses issues des installations de stockage de déchets non dangereux (ISDND)
- NF EN ISO 6145-7:2018 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 7 : régulateurs thermiques de débit massique
- NF EN 14662-4:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 4 : échantillonnage par diffusion suivi d'une désorption thermique et d'une chromatographie en phase gazeuse
- NF EN 14662-3:2015 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 3 : prélèvement par pompage automatique avec analyse chromatographique en phase gazeuse sur site
- NF S66-834*NF EN ISO/IEC 80079-34:2011 Explosive atmospheres - Part 34 : application of quality systems for equipment manufacture
- XP X43-047-1*XP CEN/TS 16115-1:2011 Ambient air quality - Measurement of bioaerosols - Part 1 : determination of moulds using filter sampling systems and culture-based analyses
- XP CEN/TS 16115-1:2011 Qualité de l'air ambiant - Mesurage de bioaérosols - Partie 1 : dosage des moisissures à l'aide de systèmes de prélèvement sur filtres et d'analyses de cultures
- NF T90-554:2007 Water quality - On-line sensors/analysing equipment for low turbidity measurement - Specifications and performance tests
- FD X43-121:2021 Atmosphères ambiantes - Capteurs pour la qualité de l'air - Concepts relatifs à l'utilisation de dispositifs de type "capteur"/"système-capteur"
- NF X43-272-1*NF ISO 16200-1:2001 Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 1 : pumped sampling method.
- NF ISO 16200-1:2001 Qualité de l'air des lieux de travail - Échantillonnage et analyse des composés organiques volatils par désorption au solvant/chromatographie en phase gazeuse - Partie 1 : méthode d'échantillonnage par pompage
- NF S93-305-2*NF EN ISO 23500-2:2019 Preparation and quality management of fluids for haemodialysis and related therapies - Part 2 : water treatment equipment for haemodialysis applications and related therapies
- NF EN ISO 23500-2:2019 Préparation et management de la qualité des liquides d'hémodialyse et de thérapies annexes - Partie 2 : équipement de traitement de l'eau pour des applications en hémodialyse et aux thérapies apparentées
- NF Z85-842-1:2008 Electromagnetic compatibility and Radio spectrum Matters (ERM) - VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment - Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment - Part 1 : physical l
- NF X44-014-2*NF EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2 : aerosol production, measuring equipment and particle-counting statistics
- NF C23-560-2:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 2 : performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air.
- NF C23-560-3:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 3 : performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air.
- NF EN 15859:2010 Qualité de l'air - Certification des analyseurs automatiques pour la surveillance des systèmes de réduction des poussières à l'émission des sources fixes - Spécifications de performance et modes opératoires d'essai
- NF X43-354*NF EN 15859:2010 Air quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures.
- NF EN IEC 60522-1:2021 Appareils électromedicaux - Rayonnements X de diagnostic - Partie 1 : détermination de la filtration de qualité équivalente et de la filtration permanente
- NF C42-736/A1:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes.
German Institute for Standardization, Air Quality Analysis Equipment
- DIN EN 15267-1:2021-12 Air quality - Assessment of air quality monitoring equipment - Part 1: General principles of certification; German and English version prEN 15267-1:2021 / Note: Date of issue 2021-10-29*Intended as replacement for DIN EN 15267-1 (2009-07).
- DIN 29571-3:1990 Aerospace; electrical equipment; analysis of load and power source capacity
- DIN ISO 4219:1990 Air quality; determination of gaseous sulfur compounds in ambient air; sampling equipment; identical with ISO 4219:1979
- DIN EN 15267-2:2021-12 Air quality - Assessment of air quality monitoring equipment - Part 2: Initial assessment of the manufacturer's quality management system and post certification surveillance for the manufacturing process; German and English version prEN 15267-2:2021 /...
- DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907
- DIN EN ISO 15839:2007 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003); English version of DIN EN ISO 15839:2007-02
- DIN EN 15267-4:2022-08 Air quality - Assessment of air quality monitoring equipment - Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources; German and English version prEN 152...
- DIN EN 15267-3:2022-08 Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources; German and English version prEN 1...
- DIN EN 15267-1:2023-09 Air quality - Assessment of air quality monitoring equipment - Part 1: General principles of certification; German version EN 15267-1:2023 / Note: Applies in conjunction with DIN EN ISO/IEC 17065 (2013-01).
- DIN EN 15267-2:2023-09 Air quality - Assessment of air quality monitoring equipment - Part 2: Initial assessment of the manufacturer\'s quality management system and post certification surveillance for the manufacturing process; German version EN 15267-2:2023 / Note: Applies...
- DIN EN ISO 6145-7:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
- DIN CEN ISO/TS 21805:2019-07*DIN SPEC 14039:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
- DIN EN ISO 6145-7:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
- DIN CEN/TS 16115-1:2011-07*DIN SPEC 91221:2011-07 Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses; German version CEN/TS 16115-1:2011
- DIN EN ISO 23500-2:2019-11 Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies (ISO 23500-2:2019); German version EN ISO 23500-2:2019 / Note: To be replaced ...
- DIN EN ISO 23500-2:2022-12 Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies (ISO/DIS 23500-2:2022); German and English version prEN ISO 23500-2:2022 / Not...
- DIN 33893-2:1997 Dust emission of technical equipment - Evaluation of the emission of airborne hazardous substances - Part 2: Pollutant concentration parameter; stationary operated wood working machines
- DIN EN ISO 29463-2:2019-05 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011); German version EN ISO 29463-2:2018
- DIN EN 15859:2010-08 Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures; German version EN 15859:2010
- DIN CEN/TS 16115-1:2011 Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses; German version CEN/TS 16115-1:2011
- DIN EN ISO 23500-2:2019 Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies (ISO 23500-2:2019)
- DIN EN ISO 29463-2:2019 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011)
- DIN EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011); German and English version prEN ISO 29463-2:2018
- DIN EN ISO 21904-4:2020 Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: Determination of the minimum air volume flow rate of capture devices (ISO 21904-4:2020)
- DIN EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009); German version EN ISO 6145-7:2010
- DIN EN IEC 60522-1:2022-05 Medical electrical equipment - Diagnostic X-rays - Part 1: Determination of quality equivalent filtration and permanent filtration (IEC 60522-1:2020); German version EN IEC 60522-1:2021
Professional Standard - Machinery, Air Quality Analysis Equipment
- JB/T 53141-1998 Product quality classification of large and medium-sized air separation equipment
- JB/T 50057-1999 Product Quality Grading of Switching Butterfly Valves for Air Separation Equipment
- JB/T 7260-1994 Brazed seam radiography and quality grading for air separation equipment
- JB/T 53147-1997 Small air separation plant product quality classification (internal use)
- JB/T 7260-2023 Air separation plants—Radiographic and quality classification to brazed seams
- JB/T 53021-1999 Vacuum coating equipment product quality classification
- JB/T 53143-1999 Product quality classification of centrifugal cryogenic liquid pumps for air separation equipment
- JB/T 53157-1999 Natural gas separation equipment product quality classification
- JB/T 53155-1999 Quality classification of cryogenic globe valves and throttle valves for air separation equipment
- JB/T 50129-1999 Guidelines for product quality classification inspection of gas-insulated metal-enclosed switchgear above 72.5kV
- JB/T 50128-1999 3.6 ~ 40.5kV AC high voltage switchgear used vacuum interrupter product quality inspection guidelines (internal use)
British Standards Institution (BSI), Air Quality Analysis Equipment
- BS EN 15267-1:2023 Air quality. Assessment of air quality monitoring equipment. General principles of certification
- 21/30441601 DC BS EN 15267-1. Air quality. Assessment of air quality monitoring equipment - Part 1. General principles of certification
- BS 5849:1980 Method of expression of performance of air quality infra-red analysers
- BS EN 15267-2:2023 Air quality. Assessment of air quality monitoring equipment. Initial assessment of the manufacturer's quality management system and post certification surveillance for the manufacturing process
- BS ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Thermal mass-flow controllers
- 21/30441604 DC BS EN 15267-2. Air quality. Assessment of air quality monitoring equipment - Part 2. Initial assessment of the manufacturer’s quality management system and post certification surveillance for the manufacturing process
- BS EN ISO 6145-7:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Thermal mass-flow controllers
- 22/30454087 DC BS EN 15267-4. Air quality. Assessment of air quality monitoring equipment. - Part 4. Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources
- BS ISO 22262-2:2014 Air quality. Bulk materials. Quantitative determination of asbestos by gravimetric and microscopical methods
- PD IEC/TR 62396-7:2017 Process management for avionics. Atmospheric radiation effects. Management of single event effects (SEE) analysis process in avionics design
- BS EN ISO 6145-7:2018 Tracked Changes. Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Thermal mass-flow controllers
- 22/30454084 DC BS EN 15267-3. Air quality. Assessment of air quality monitoring equipment. - Part 3. Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
- BS DD CEN/TS 16115-1:2011 Ambient air quality. Measurement of bioaerosols. Determination of moulds using filter sampling systems and culture-based analyses
- DD CEN/TS 16115-1:2011 Ambient air quality. Measurement of bioaerosols - Determination of moulds using filter sampling systems and culture-based analyses
- BS ISO 17736:2010 Workplace air quality. Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
- BS ISO 16200-1:2001 Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Pumped sampling method
- BS ISO 16200-2:2000 Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Diffusive sampling method
- BS ISO 17736:2011 Workplace air quality. Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
- 22/30451002 DC BS EN 14662-1. Ambient air quality. Standard method for measurement of benzene concentrations. - Part 1. Pumped sampling followed by thermal desorption and gas chromatography
- BS ISO 16200-2:2004 Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Diffusive sampling method
- PD IEC TS 63383:2022 Cybersecurity aspects of devices used for power metering and monitoring, power quality monitoring, data collection and analysis
- BS EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air. Aerosol production, measuring equipment and particle-counting statistics
- BS ISO 16200-1:2004 Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Pumped sampling method
- PD IEC TR 62396-8:2020 Process management for avionics. Atmospheric radiation effects. Proton, electron, pion, muon, alpha-ray fluxes and single event effects in avionics electronic equipment. Awareness guidelines
- 22/30449648 DC BS EN ISO 23500-2. Preparation and quality management of fluids for haemodialysis and related therapies - Part 2. Water treatment equipment for haemodialysis applications and related therapies
- BS EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
- BS EN 61010-2-081:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
- BS EN IEC 60522-1:2021 Medical electrical equipment. Diagnostic X-rays. Determination of quality equivalent filtration and permanent filtration
European Committee for Standardization (CEN), Air Quality Analysis Equipment
- EN 15267-1:2023 Air quality - Assessment of air quality monitoring equipment - Part 1: General principles of certification
- EN 15267-2:2023 Air quality - Assessment of air quality monitoring equipment - Part 2: Initial assessment of the manufacturer’s quality management system and post certification surveillance for the manufacturing process
- EN ISO 15839:2006 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests
- PD CEN/TS 16868:2015 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for allergy networks - Volumetric Hirst method
- EN ISO 6145-7:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
- PD CEN/TS 16115-1:2011 Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses
- EN ISO/IEC 80079-34:2020 Explosive atmospheres - Part 34: Application of quality management systems for Ex Product manufacture (ISO/IEC 80079-34:2018)
- EN ISO/IEC 80079-34:2011 Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture
- EN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
- EN 1822-2:1998 High Efficiency Air Filters (HEPA and ULPA) - Part 2: Aerosol Production, Measuring Equipment, Particle Counting Statistics
- prEN ISO 23500-2 Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies (ISO/DIS 23500-2:2022)
- EN ISO 13385-1:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
- EN ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics
Professional Standard - Electron, Air Quality Analysis Equipment
- SJ/Z 9126-1987 Presentation for performances of air quality infra-red analyzers
IN-BIS, Air Quality Analysis Equipment
API - American Petroleum Institute, Air Quality Analysis Equipment
- API PUBL 4332-1980 Analysis of the Impact of Air Quality Modeling of Siting Limitations for Natural Gas Desulfurization facilities
未注明发布机构, Air Quality Analysis Equipment
- BS 5849:1980(1999)*IEC 528:1975 Method of Expression of performance of air quality infra - red analysers [ IEC title : Expression of performance of air quality infra - red analyzers ]
-
- BS ISO 16200-2:2000(2004) Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption / gas chromatography — Part 2 : Diffusive sampling method
- BS ISO 16200-1:2001(2004) Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption / gas chromatography — Part 1 : Pumped sampling method
- DIN EN 1822-2:1998 High efficiency particulate air filters (HEPA and ULPA) — Part 2: Aerosol production, measuring equipment, particle counting statistics
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Air Quality Analysis Equipment
未注明发布机构, Air Quality Analysis Equipment
- BS 5849:1980(1999)*IEC 528:1975 Method of Expression of performance of air quality infra - red analysers [ IEC title : Expression of performance of air quality infra - red analyzers ]
-
- BS ISO 16200-2:2000(2004) Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption / gas chromatography — Part 2 : Diffusive sampling method
- BS ISO 16200-1:2001(2004) Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption / gas chromatography — Part 1 : Pumped sampling method
- DIN EN 1822-2:1998 High efficiency particulate air filters (HEPA and ULPA) — Part 2: Aerosol production, measuring equipment, particle counting statistics
VN-TCVN, Air Quality Analysis Equipment
- TCVN 5968-1995 Air quality.Determination of gaseous sulphur compounds in ambient air.Sampling equipment
Korean Agency for Technology and Standards (KATS), Air Quality Analysis Equipment
- KS I 2005-2005(2010) Air quality－Determination of gaseous sulphur compounds in ambient air(Sampling equipment)
- KS I ISO 4219:2022 Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment
- KS I ISO 6145-7-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
- KS I ISO 6145-7:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 7:Thermal mass-flow controllers
- KS I ISO 6145-7:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
- KS I ISO 16200-2:2006 Workplace air quality－Sampling and analysis of volatile organiccompounds by solvent desorption/gas chromatography－Part 2：Diffusive sampling method
- KS I ISO 17736:2020 Workplace air quality — Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
- KS I ISO 16200-2-2006(2017) Workplace air quality－Sampling and analysis of volatile organiccompounds by solvent desorption/gas chromatography－Part 2：Diffusive sampling method
- KS B ISO 29463-2:2021 High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics
- KS C IEC 63086-1:2021 Household and similar electrical air cleaning appliances —methods for measuring the performance —Part 1: General requirements
- KS I ISO 16200-2:2021 Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography —Part 2: Diffusive sampling method
- KS I ISO 16200-1:2019 Workplace air quality ― Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography ―Part 1: Pumped sampling method
KR-KS, Air Quality Analysis Equipment
- KS I ISO 4219-2017 Air quality－Determination of gaseous sulphur compounds in ambient air－Sampling equipment
- KS I ISO 4219-2022 Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment
- KS I ISO 17736-2020 Workplace air quality — Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
- KS B ISO 29463-2-2021 High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics
- KS C IEC 63086-1-2021 Household and similar electrical air cleaning appliances —methods for measuring the performance —Part 1: General requirements
- KS I ISO 16200-2-2021 Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography —Part 2: Diffusive sampling method
- KS I ISO 16200-1-2019 Workplace air quality ― Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography ―Part 1: Pumped sampling method
American National Standards Institute （ANSI), Air Quality Analysis Equipment
Association of German Mechanical Engineers, Air Quality Analysis Equipment
- VDI 6022 Blatt 6-2013 Ventilation and indoor-air quality - Air humidification on decentralised devices - Planning, construction, operation, maintenance
- VDI 6022 Blatt 6 Berichtigung-2016 Ventilation and indoor-air quality - Air humidification on decentralised devices - Planning, construction, operation, maintenance - Corrigendum concerning standard VDI VDI 6022 Blatt 6:2013-12
NO-SN, Air Quality Analysis Equipment
- NS 4850-1980 Air quality - Determination of gaseous sulphur compounds in ambient air - Sampling equipment
AENOR, Air Quality Analysis Equipment
- UNE 77202:1991 AIR QUALITY. DETERMINATION OF GASEOUS SULPHUR COMPOUNDS IN AMBIENT AIR. SAMPLING EQUIPMENT.
- UNE-EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
- UNE-CEN/TS 16115-1:2013 Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses
- UNE-EN 15859:2010 Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures
- UNE-EN 1822-2:2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
- UNE-EN 61010-2-081:2003 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
International Electrotechnical Commission (IEC), Air Quality Analysis Equipment
- IEC 60528:1975 Expression of performance of air quality infra-red analyzers
- IEC TR 62396-7:2017 Process management for avionics - Atmospheric radiation effects - Part 7: Management of single event effects (SEE) analysis process in avionics design
- IEC TS 63383:2022 Cybersecurity aspects of devices used for power metering and monitoring, power quality monitoring, data collection and analysis
- IEC TR 62396-8:2020 Process management for avionics - Atmospheric radiation effects - Part 8: Proton, electron, pion, muon, alpha-ray fluxes and single event effects in avionics electronic equipment - Awareness guideline
- IEC 61779-2:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
- IEC 61779-3:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
- IEC 60522-1:2020 Medical electrical equipment - Diagnostic X-rays - Part 1: Determination of quality equivalent filtration and permanent filtration
- QC 001002-4 AMD 1-2004 IEC Quality assessment system for Electronic Components (IECQ) - Rules of procedure - Part 4: Avionics assessment program requirements
- IEC 61010-2-081:2001 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
- IEC 61010-2-081:2001/AMD1:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and o
- IEC 61010-2-081:2001+AMD1:2003 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and o
- IEC 61010-2-081:2019 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and ot
International Organization for Standardization (ISO), Air Quality Analysis Equipment
- ISO 17736:2010 Workplace air quality - Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
- ISO 7395:1984 Gas analysis — Preparation of calibration gas mixtures — Mass dynamic method
- ISO 6145-7:2018 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers
- ISO 6145-7:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
- ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
- ISO 22262-2:2014 Air quality - Bulk materials - Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
- ISO 16200-2:2000 Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 2: Diffusive sampling method
- ISO 29463-2:2011 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics
- ISO/DIS 23500-2 Preparation and quality management of fluids for haemodialysis and related therapies — Part 2: Water treatment equipment for haemodialysis applications and related therapies
- ISO 23500-2:2019 Preparation and quality management of fluids for haemodialysis and related therapies — Part 2: Water treatment equipment for haemodialysis applications and related therapies
- ISO 16900-8:2015 Respiratory protective devices - Methods of test and test equipment - Part 8: Measurement of RPD air flow rates of assisted filtering RPD
- ISO 16200-1:2001 Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 1: Pumped sampling method
Standard Association of Australia （SAA）, Air Quality Analysis Equipment
- AS/NZS 3580.18:2017 Methods for sampling and analysis of ambient air, Method 18: Measurement of road tunnel air quality
- AS/NZS 3580.1.1:2016 Methods for sampling and analysis of ambient air, Part 1.1: Guide to siting air monitoring equipment
- AS/NZS 3580.14:2014
- AS 3580.19:2020 Methods for sampling and analysis of ambient air, Method 19: Ambient air quality data validation and reporting
- AS/NZS 3580.10.2:2013
- AS/NZS 3580.9.9:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) low volume sampler - Gravimetric method
- AS/NZS 3580.9.10:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM (sub)2.5(/sub) low volume sampler - Gravimetric method
- AS 3580.9.8:2001 Methods for sampling and analysis of ambient air Method 9.8: Determination of suspended particulate matter--PM continuous direct mass method using a tapered element oscillating microbalance analyser
- AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
Indonesia Standards, Air Quality Analysis Equipment
- SNI 19-7119.3-2005 Ambient atmospheres - Part 3: Test methods of total suspended particle by gravimetry using high volume air sampler (HVAS) equipment
HU-MSZT, Air Quality Analysis Equipment
CZ-CSN, Air Quality Analysis Equipment
- CSN 12 0018-1981 Methods of measurement of noise from air terminal devices for air distribution
- CSN ISO 7395:1993 Gas analysis. Preparation of calibration gas mixtures. Masss dynamic method
RU-GOST R, Air Quality Analysis Equipment
- GOST R ISO 17736-2013 Workplace air quality. Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
- GOST R 52137-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 2. Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
- GOST R 52138-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 3. Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
- GOST R ISO 16200-1-2007 Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Part 1. Pumped sampling method
- GOST R ISO 16200-2-2007 Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Part 2. Diffusive sampling method
- GOST R ISO 12884-2007 Ambient air. Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
- GOST R ISO/IEC 80079-34-2013 Explosive atmospheres. Part 34. Application of quality systems for equipment manufacture
- GOST R EN 1822-2-2012 High efficiency air filters (EPA, HEPA and ULPA). Part 2. Aerosol production, measuring equipment, particle counting statistics
- GOST R 8.791-2013 State system for ensuring the uniformity of measurements. Radioisotope and piezobalance analyzers for mass concentration of aerosol particles in air of the working zone. The method of verification
PL-PKN, Air Quality Analysis Equipment
- PN R04013-1988 Agrochemical plant analyse Determination of air dry and dry mass
- PN Z02014-05-1992 Respiratory protective e?uipment used in air environment Antidust half masks and filters Quality inspection
PT-IPQ, Air Quality Analysis Equipment
Professional Standard - Petroleum, Air Quality Analysis Equipment
- SY/T 5283-1991 Quality Classification of Pneumatic Components Used in Petroleum Drilling Equipment
- SY 4201.2-2007 Code for quality acceptance of oil and gas construction engineering.Equipment installation engineering.Part 2:Tower device
- SY 4201.4-2007 Code for quality acceptance of oil and gas construction engineering.Equipment installation engineering.Part 4:Boiler device
- SY 4201.1-2007 Code for quality accptance of oil and gas construction engineering Equipment installation engineering Part 1: Mechanism and pump device
- SY 4201.3-2007 Code for quality acceptance of oil and gas construction engineering.Equipment installation engineering.Part 3:Container equipments
- SY 4201.4-2016 Code for quality acceptance of oil and gas construction engineering.Equipment installation engineering.Part 4: Furance
- SY 4201.2-2016 Code for quality acceptance of oil and gas construction engineering.Equipment installation engineering.Part 2: Column
- SY 4201.1-2016 Code for quality acceptance of oil and gas construction engineering.Equipment installation engineering.Part 1: Mechanism and pump
- SY 4201.3-2016 Code for quality acceptance of oil and gas construction engineering.Equipment installation engineering.Part 3:Container
能源部, Air Quality Analysis Equipment
- SY 5283-1991 Quality classification of pneumatic components for oil drilling and production equipment
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Air Quality Analysis Equipment
- ASHRAE HI-02-19-3-2002 CFD Analysis on Rising Stream Around a Human Body and Its Effect on Inhalation Air Quality
- ASHRAE BN-97-2-3-1997 Application and Installation Quality Analysis of Residential Heat Pump Equipment in Alabama
- ASHRAE 4635-2003 A Methodology for Analyzing the Association Between Student Parformance and Indoor Air Quality
Group Standards of the People's Republic of China, Air Quality Analysis Equipment
- T/CECS 1191-2022 Air quality zoning and control design standards for civil buildings
- T/ZGM 008-2022 Assessment requirements for quality grading and forerunner - Three-compartment Bipolar membrane electrodialyzers
Japanese Industrial Standards Committee (JISC), Air Quality Analysis Equipment
- JIS A 1481-4:2016 Air quality -- Bulk materials -- Part 4: Quantitative determination of asbestos by gravimetric and microscopical methods
- JIS B 9927-2:2022 High-efficiency filters (EPA, HEPA and ULPA) and filter media for removing particles in air -- Part 2: Aerosol production, measuring equipment and particle-counting statistics
- JIS C 5401-3-001:2005 Connectors for electronic equipment -- Part 3-001: Rectangular connectors with assessed quality -- Blank detail specification
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Air Quality Analysis Equipment
- GB/T 5275.7-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 7:Thermal mass-flow controllers
- GB 50677-2011 Code for construction and acceptance of oxygen plant equipment installation engineering
- GB/T 8971-1988 Analysis of Benzo(α)Dyrene in Airborne particulates matters by acctylated paper chromatography fluorescence spectrophotometric method
- GB/T 18443.4-2010 Performance test methods for vacuum insulation and cryogenic equipment - Part 4: Measurement of leakage and outgassing rates
- GB/T 42125.14-2023 Safety requirements for electrical equipment for measurement, control and laboratory use—Part 14:Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other pu
- GB 4793.9-2013 Safety requirements for electrical equipment for measurement, control and laboratory use.Part 9:Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
ES-UNE, Air Quality Analysis Equipment
- UNE-EN ISO 6145-7:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
- UNE 199152-1:2016 Road traffic management equipment. Data quality. Data analysis. Part 1: Interurban Traffic data
- UNE-EN ISO 23500-2:2019 Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies (ISO 23500-2:2019)
- ISO/FDIS 23500-2:2023 Preparation and quality management of fluids for haemodialysis and related therapies — Part 2: Water treatment equipment for haemodialysis applications and related therapies
- UNE-EN ISO 29463-2:2019 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011)
- UNE-EN IEC 60522-1:2021 Medical electrical equipment - Diagnostic X-rays - Part 1: Determination of quality equivalent filtration and permanent filtration (Endorsed by Asociación Española de Normalización in April of 2021.)
Danish Standards Foundation, Air Quality Analysis Equipment
- DS/EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
- DS/CEN/TS 16115-1:2011 Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses
- DS/EN 61010-2-081:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic analytical equipment for analysis and other purposes
- DS/ISO 10302-2:2011 Acoustics - Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices - Part 2: Structure-borne vibration measurements
- DS/EN 15859:2010 Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures
- DS/EN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
- DS/EN IEC 60522-1:2021 Medical electrical equipment – Diagnostic X-rays – Part 1: Determination of quality equivalent filtration and permanent filtration
SG-SPRING SG, Air Quality Analysis Equipment
- SS 254 Pt.3B-1981 SPECIFICATION FOR Electrical Apparatus for Explosive Gas Atmospheres Part3B : Spark Test Apparatus for Intrinsically-safe Circuits
- SS 254 Pt.3A-1981 SPECIFICATION FOR Electrical Apparatus for Explosive Gas Atmospheres Part 3A : Construction and Test of Intrinsically-safe and Associated Apparatus
CEN - European Committee for Standardization, Air Quality Analysis Equipment
- EN ISO 6145-7:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers
- EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production@ measuring equipment and particle-counting statistics
- EN ISO 23500-2:2019 Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies
RO-ASRO, Air Quality Analysis Equipment
- STAS 8842-1979 Automation means and devices AIR FOR SUPPLYING PNEUMATIC AUTOMATION MEANS General technical requirements for quality
- STAS 12720/4-1989 Equipment for hydrogeological drilling BIT COLLARS FOR COUNTER FLUSH DRILLING BY ABSORPTION OR AIRLIFT Dimensions
- STAS 12011/2-1989 DRIED SAFETY DEVICES FOR FUEL GASES, OXYGEN AND COMPRESSED AIR FOR WELDING AND CUTTING EQUIPMENT AND RELATED PROCESSES General technical requirements tor quality
- STAS 12619/21-1990 Fixde capacitors for use in elecrtintc eqtilpmrnl POLYESTER DIELECTRIC PIXPtJ CAPACITORS Blank detail specification for quality ?wsesment level E
- STAS 12553/21-1988 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT FIXED LOW-POWER NON- W IRE WO UND RESISTORS Blank detail specification for quality assessment level E
Professional Standard - Agriculture, Air Quality Analysis Equipment
- DBJ440100/T 74-2010 Determination of Carbonyl Compounds in Air Quality DNPH Derivatization High Performance Liquid Chromatography
Lithuanian Standards Office , Air Quality Analysis Equipment
- LST EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
- LST EN 15859-2010 Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures
- LST EN 1822-2-2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
Society of Automotive Engineers (SAE), Air Quality Analysis Equipment
- SAE AS6923-2021 Portable Measuring Devices/Systems for Maintenance Troubleshooting of Aircraft Cabin and Flight Deck Air Quality Issues
Military Standard of the People's Republic of China-General Armament Department, Air Quality Analysis Equipment
- GJB 763.5A-2020 Ship Noise Limits and Measurement Methods Part 5: Ship Equipment Air Noise Measurement
中华人民共和国环境保护部, Air Quality Analysis Equipment
- GB 8971-1988 Air quality-Determination of benzo(a) pyrene in flying dust-Acetylated paper chromatography fluorescence spectrophotometric method
Guizhou Provincial Standard of the People's Republic of China, Air Quality Analysis Equipment
- DB52/T 1669.4-2022 Gas cylinder quality and safety traceability system Part 4: Filling reading and writing control equipment
CENELEC - European Committee for Electrotechnical Standardization, Air Quality Analysis Equipment
- EN 61779-3:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 3: Performance Requirements for Group I Apparatus Indicating a Volume Fraction Up to 100% Methane in Air
国家药监局, Air Quality Analysis Equipment
- YY/T 0793.1-2022 Preparation and quality management of fluids for hemodialysis and related treatments Part 1: Water treatment equipment for hemodialysis and related treatments
Professional Standard - Electricity, Air Quality Analysis Equipment
- DL/T 5161.13-2002 Specification for construction quality checkout and evaluation of electric equipment installation Part 13:Power converter equipment
- DL/T 5161.13-2018 Specification for construction quality checkout and evaluation of electric equipment installation Part 13:Power converter equipment
Acoustical Society of America (ASA), Air Quality Analysis Equipment
- ASA S12.11 PART 1-2003(R2008) Acoustics ?Measurement of noise and vibration of small air-moving devices, Part 1: Airborne noise emission [Superseded: ASA S12.11]
国家能源局, Air Quality Analysis Equipment
- SY 4201.4-2106 Specifications for Construction Quality Acceptance of Oil and Gas Construction Projects Equipment Installation Project Part 4: Furnaces
- SY/T 4201.2-2019 Specifications for Construction Quality Acceptance of Oil and Gas Construction Projects Equipment Installation Projects Part 2: Towers
- SY/T 4201.4-2019 Specifications for Construction Quality Acceptance of Oil and Gas Construction Projects Equipment Installation Project Part 4: Furnaces
- SY/T 4201.1-2019 Specifications for Construction Quality Acceptance of Oil and Gas Construction Projects Equipment Installation Project Part 1: Machines and Pumps
- SY 4201.3-2013 Specifications for Construction Quality Acceptance of Oil and Gas Construction Projects Equipment Installation Projects Part 3: Containers
- SY/T 4201.3-2019 Specifications for Construction Quality Acceptance of Oil and Gas Construction Projects Equipment Installation Projects Part 3: Containers
International Telecommunication Union (ITU), Air Quality Analysis Equipment
American Society for Testing and Materials (ASTM), Air Quality Analysis Equipment
- ASTM F2113-01e1 Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications
- ASTM F2113-01(2011) Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications
European Committee for Electrotechnical Standardization（CENELEC）, Air Quality Analysis Equipment
- EN IEC 60522-1:2021 Medical electrical equipment - Diagnostic X-rays - Part 1: Determination of quality equivalent filtration and permanent filtration
- EN 61010-2-081:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes Safety requirements for electrical equipme
- EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
ZA-SANS, Air Quality Analysis Equipment
- SANS 61010-2-081:2005 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes