ZH
RU
ES

Aggregate Penetration Test

Aggregate Penetration Test, Total:500 items.

In the international standard classification, Aggregate Penetration Test involves: Non-destructive testing, Waxes, bituminous materials and other petroleum products, Road vehicle systems, Products of the textile industry, Construction materials, Earthworks. Excavations. Foundation construction. Underground works, Pipeline components and pipelines, Packaging and distribution of goods in general, Packaging materials and accessories, Road engineering, Protective equipment, Tyres, Refractories, Magnetic materials, Diagnostic, maintenance and test equipment, Protection against fire, Vocabularies, Testing of metals, Elements of buildings, Geology. Meteorology. Hydrology, Soil quality. Pedology, Rubber and plastics products, Wastes, Structures of buildings, Ceramics, Fibre optic communications, Insulating materials, Powder metallurgy, Sacks. Bags, Analytical chemistry, Civil engineering in general, Leather technology, Welding, brazing and soldering, Pharmaceutics, Hospital equipment, Fuels, Agricultural machines, implements and equipment, Environmental testing, Adhesives, Materials for the reinforcement of composites, Surface treatment and coating, Paints and varnishes, Reinforced plastics, Nuclear energy engineering, Iron and steel products, Footwear, Lubricants, industrial oils and related products, Protection of and in buildings, Paper products, Paper and board, Products of the chemical industry, Materials and components for railway engineering, Telecommunication systems, Components and accessories for telecommunications equipment, Solar energy engineering, Aerospace electric equipment and systems, Textile fibres, Water quality, Optics and optical measurements, Electrical and electronic testing.


British Standards Institution (BSI), Aggregate Penetration Test

  • BS EN ISO 3452-2:2000 Non-destructive testing - Penetrant testing - Testing of penetrant materials
  • BS EN ISO 3452-2:2006 Non-destructive testing - Penetrant testing - Testing of penetrant materials
  • BS EN ISO 3452-2:2013 Non-destructive testing. Penetrant testing. Testing of penetrant materials
  • BS EN ISO 3452-2:2021 Tracked Changes. Non-destructive testing. Penetrant testing. Testing of penetrant materials
  • BS ISO 18695:2007 Textiles - Determination of resistance to water penetration - Impact penetration test
  • BS EN ISO 3452-5:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures higher than 50 degrees C
  • BS EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures higher than 50 degrees C
  • BS EN ISO 3452-6:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures lower than 10 degrees C
  • BS EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures lower than 10 degrees C
  • BS EN ISO 12706:2010 Non-destructive testing. Penetrant testing. Vocabulary
  • BS EN ISO 12706:2009 Non-destructive testing - Penetrant testing - Vocabulary
  • BS EN ISO 3452-3:1999 Non-destructive testing - Penetrant testing - Reference test blocks
  • 19/30376317 DC BS EN ISO 3452-2. Non-destructive testing. Penetrant testing. Part 2. Testing of penetrant materials
  • BS EN ISO 22476-3:2005 Geotechnical investigation and testing - Field testing - Standard penetration test
  • BS EN ISO 22476-3+A1:2006 Geotechnical investigation and testing. Field testing. Standard penetration test
  • BS EN ISO 22476-3:2005+A1:2011 Geotechnical investigation and testing. Field testing. Standard penetration test
  • BS EN 13087-3:2000 Protective helmets. Test methods. Resistance to penetration
  • BS EN 13087-3:2000(2002) Protective helmets. Test methods. Resistance to penetration
  • BS EN ISO 23277:2010 Non-destructive testing of welds. Penetrant testing of welds. Acceptance levels
  • BS EN 12697-19:2012 Bituminous mixtures. Test methods for hot mix asphalt. Permeability of specimen
  • BS EN 12697-19:2004 Bituminous mixtures - Test methods for hot mix asphalt - Permeabilty of specimen
  • BS EN 1366-3:2004 Fire resistance tests for service installations - Penetration seals
  • BS EN 1366-3:2009 Fire resistance tests for service installations - Penetration seals
  • BS EN 13726-2:2002 Test methods for primary wound dressings - Moisture vapour transmission rate of permeable film dressings
  • BS EN ISO 22282-5:2012 Geotechnical investigation and testing. Geohydraulic testing. Infiltrometer tests
  • BS 4315-2:1970 Methods of test for resistance to air and water penetration - Permeable walling constructions (water penetration)
  • BS EN ISO 23277:2009 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels
  • BS ISO 16532-1:2009 Paper and board. Determination of grease resistance. Permeability test
  • BS ISO 16532-1:2008 Paper and board - Determination of grease resistance - Permeability test
  • BS EN 50289-4-2:2001 Communication cables - Specifications for test methods - Environmental test methods - Water penetration
  • BS EN 12390-8:2000 Testing hardened concrete - Depth of penetration of water under pressure
  • BS EN ISO 22476-1:2012 Geotechnical investigation and testing. Field testing. Electrical cone and piezocone penetration test

ZA-SANS, Aggregate Penetration Test

  • SANS 3452-2:2000 Non-destructive testing - Penetrant testing Part 2: Testing of penetrant materials
  • SANS 3452-2:2009 Non-destructive testing - Penetrant testing Part 2: Testing of penetrant materials
  • SANS 5101:2004 Water resistance of textile fabrics: drop penetration test
  • SANS 3452-3:1998 Non-destructive testing - Penetrant testing Part 3: Reference test blocks

Korean Agency for Technology and Standards (KATS), Aggregate Penetration Test

  • KS B ISO 3452-2:2007 Non-destructive testing－Penetrant testing－Part 2：Testing of penetrant materials
  • KS M 2252-2007(2022) Testing method for penetrating of bituminous materials
  • KS K ISO 18695:2019 Textiles — Determination of resistance to water penetration — Impact penetration test
  • KS T 1305-2016 Testing method for permeability of damp proof packing materials
  • KS K ISO 18695:2009 Textiles-Determination of resistance to water penetration-Impact penetration test
  • KS K ISO 18695:2014 Textiles — Determination of resistance to water penetration — Impact penetration test
  • KS T 1305-2022 Testing method for permeability of damp proof packing materials
  • KS D 0282-2005 Standard test method for water penetration into pipeline coatings
  • KS F 2494-2017 Standard test method of the laboratory permeability test for
  • KS F 2494-2017(2022) Standard test method of the laboratory permeability test for
  • KS M 2252-2007(2017) Testing method for penetrating of bituminous materials
  • KS F 2322-2015 Test methods for permeability of saturated soils
  • KS F 2322-1995 Test methods for permeability of saturated soils
  • KS M 6886-2016(2021) Testing method of water vapour permeability for leather
  • KS W 0914-2004 Liquid penetrant inspection for aerospace use
  • KS T 1314-2012(2022) Method of permeability test for moisture proof packaging container
  • KS T 1314-2012(2017) Method of permeability test for moisture proof packaging container
  • KS D ISO 4003:2001 Permeable sintered metal materials-Determination of bubble test pore size
  • KS D ISO 4003:2013 Permeable sintered metal materials-Determination of bubble test pore size
  • KS M 7075-2000 Testing method for oil absorptiveness of paper(castor oil method)
  • KS F 2394-2014 Standard test method for permeability of porous pavement
  • KS F 2333-2020 Standard test method for penetration resistance of fine-grained soils
  • KS K 0594-2021 Test method for water vapour permeability of textiles
  • KS B ISO 3452-3:2006 Non-destructive testing-Penetrant testing-Part 3:Reference test blocks
  • KS K ISO 6530-2016(2021) Protective clothing－Protection against liquid chemicals－Test method for resistance of materials to penetration by liquids
  • KS F 2610-2007 Measuring method of carbon dioxide permeability for building materials
  • KS M 5132-1995 Testing methods of bleeding for pigments
  • KS F 2502-2014 Standard test method for sieve analysis of fine and coarse aggregates
  • KS L 5106-2009 Testing method for fineness of portland cement by air permeability apparatus
  • KS M ISO 17230:2007 Leather－Physical and mechanical tests－Determination of water penetration pressure
  • KS F 2397-2005(2010) Standard test method for density of drained asphalt mixtures
  • KS K ISO 811:2021 Textiles — Determination of resistance to water penetration —Hydrostatic pressure test
  • KS F 2394-2019 Standard test method for permeability of porous pavement
  • KS D ISO 4003-2001(2011) Permeable sintered metal materials-Determination of bubble test pore size
  • KS M ISO 14268:2008 Leather-Physical and mchanical tests-Determination of water vapour permeability
  • KS M ISO 14268:2013 Leather ㅡ Physical and mechanical tests ㅡ Determination of water vapour permeability

International Organization for Standardization (ISO), Aggregate Penetration Test

  • ISO 3452-2:2006 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
  • ISO 3452-2:2000 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
  • ISO 3452-2:2013 Non-destructive testing.Penetrant testing.Part 2: Testing of penetrant materials
  • ISO 3452-2:2021 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
  • ISO 18695:2007 Textiles - Determination of resistance to water penetration - Impact penetration test
  • ISO 12706:2009 Non-destructive testing - Penetrant testing - Vocabulary
  • ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C
  • ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C
  • ISO 8272:1985 Doorsets; Air permeability test
  • ISO 17785-1:2016 Testing methods for pervious concrete - Part 1: Infiltration rate
  • ISO 6613:2023 Windows and doors — Air permeability — Test method
  • ISO 6613:1980 Windows and door height windows; Air permeability test
  • ISO 17892-11:2019 Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Permeability tests
  • ISO 22282-5:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests
  • ISO 17230:2006 Leather - Physical and mechanical tests - Determination of water penetration pressure

Japanese Industrial Standards Committee (JISC), Aggregate Penetration Test

  • JIS Z 2343-2:2001 Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials
  • JIS Z 2343-2:2009 Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials
  • JIS Z 2343-2:2017 Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials
  • JIS Z 0221:1976 Method of water permeability test for packing material
  • JIS A 1219:2013 Method for standard penetration test
  • JIS Z 2343-6:2012 Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 degree C
  • JIS Z 2343-5:2012 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degree C
  • JIS A 1218:1998 Test methods for permeability of saturated soils
  • JIS A 1218:2009 Test methods for permeability of saturated soils
  • JIS L 1099:2006 Testing methods for water vapour permeability of textiles
  • JIS L 1099:2012 Testing methods for water vapour permeability of textiles
  • JIS L 1099:1993 Testing methods for water vapour permeability of textiles
  • JIS L 1099:2021 Test methods for water vapour permeability of textiles
  • JIS Z 2343-3:2001 Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks
  • JIS Z 2343-3:2017 Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks
  • JIS Z 2343:1992 Method for liquid penetrant testing and classification of the indication
  • JIS Z 0220:1960 Testing method for exudation resistance of tarpaulin paper for wrappings
  • JIS Z 0222:1959 Method of permeability test for moisture proof packing case
  • JIS K 6404-15:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 15: Water vapor permeability

Association Francaise de Normalisation, Aggregate Penetration Test

  • NF A09-120-2:2007 Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials.
  • NF A09-120-2*NF EN ISO 3452-2:2021 Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials
  • NF A09-120-2:2014 Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials
  • NF A09-120-6*NF EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6 : penetrant testing at temperatures lower than 10 oC.
  • NF G07-055*NF ISO 18695:2008 Textiles - Determination of resistance to water penetration - Impact penetration test
  • NF A09-020-6*NF EN ISO 12706:2010 Non-destructive testing - Penetrant testing - Vocabulary
  • NF A09-120-5*NF EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5 : penetrant testing at temperatures higher than 50 oC.
  • NF X30-424:2013 Déchets - Détermination du coefficient de perméabilité d'un terrain par essai d'infiltration à charge constante en forage
  • NF X30-441:2008 Déchets - Détermination en laboratoire du coefficient de perméabilité à saturation d'un matériau - Essais de perméabilité au perméamètre à paroi rigide à gradient hydraulique constant/variable
  • NF P98-818-19*NF EN 12697-19:2020 Bituminous mixtures - Test methods - Part 19 : permeability of specimen
  • NF X30-442:2008 Déchets - Détermination au laboratoire du coefficient de perméabilité à saturation d'un matériau - Essais de perméabilité à l'oedomètre à charge hydraulique constante/variable
  • NF ISO 16532-1:2009 Papier et carton - Détermination de l'imperméabilité aux graisses - Partie 1 : essai de perméabilité
  • NF X30-465:2005 Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions).
  • NF T30-704:1983 Paints. Thick plastics coatings. Test for blister formation under water vapour diffusion.
  • NF X30-443:2014 Déchets - Détermination en laboratoire du coefficient de perméabilité à saturation d'un matériau - Perméamètre à paroi flexible à gradient hydraulique constant
  • NF G62-003:1982 Footwear. Method of test for the dynamic wayer proofness of soling leather.
  • NF S74-507:1993 Protective clothing. Protection against liquid chemicals. Test method : resistance of materials to permeation by liquids.
  • NF G52-016:1976 Determination of the permeability of leather to watervapour (static test).
  • NF EN 13726:2023 Méthodes d'essai pour pansements en contact avec la plaie - Absorption, perméabilité à la vapeur d'eau, imperméabilité à l'eau et extensibilité
  • NF P94-523-5*NF EN ISO 22282-5:2014 Geotechnical investigation and testing - Geohydraulic testing - Part 5 : Infiltrometer tests
  • NF S74-506:1993 Protective clothing. Protection against liquid chemicals. Test method : resistance of materials to penetration by liquids.
  • NF EN ISO 6530:2005 Vêtements de protection - Protection contre les produits chimiques liquides - Méthode d'essai pour la résistance des matériaux à la pénétration par des liquides
  • NF EN 13726-2:2002 Méthodes d'essai pour les pansements primaires en contact avec la plaie - Partie 2 : perméabilité à la vapeur d'eau des pansements comprenant un film perméable
  • NF A04-191-2*NF EN 1371-2:2015 Founding - Liquid penetrant testing - Part 2 : investment castings
  • NF S72-509-3/A1*NF EN 13087-3/A1:2002 Protective helmets - Test methods - Part 3 : resistance to penetration
  • NF G07-057*NF EN ISO 811:2018 Textiles - Determination of resistance to water penetration - Hydrostatic pressure test
  • NF EN ISO 811:2018 Textiles -Détermination de la résistance à la pénétration de l'eau - Essai sous pression hydrostatique
  • NF P84-705:2019 Géosynthétiques bentonitiques - Détermination à l'oedoperméamètre des caractéristiques de gonflement, flux, perméabilité des géosynthétiques bentonitiques (GSB) - Essais de caractérisation et essai de performance
  • NF P84-705:2008 Geosynthetic barriers - Determination of the swelling, flow and permeability characteristics of geosysnthetic clay liners (GCL) using an oedopermeameter - Characterisation test and performance test.
  • NF EN 12697-19:2020 Mélanges bitumineux - Méthodes d'essai - Partie 19 : perméabilité des éprouvettes

未注明发布机构, Aggregate Penetration Test

  • BS 1438:2004(2009) Aggregates — Single - sized aggregates for use as a medium in biological percolating filters
  • BS EN 933-11:2009(2010) Tests for geometrical properties of aggregates Part 11 : Classification test for the constituents of coarse recycled aggregate
  • BS EN 20811:1992*ISO 811)(2000 Textiles — Determination of resistance to water penetration — Hydrostatic pressure test

GM North America, Aggregate Penetration Test

U.S. Air Force, Aggregate Penetration Test

SAE - SAE International, Aggregate Penetration Test

Professional Standard - Aviation, Aggregate Penetration Test

  • HB 7681-2000 Materials for Penetration Testing
  • HB 5316-1993 Test method for permeability of anaerobic adhesives used in aviation

United States Navy, Aggregate Penetration Test

HU-MSZT, Aggregate Penetration Test

(U.S.) Ford Automotive Standards, Aggregate Penetration Test

The American Road & Transportation Builders Association, Aggregate Penetration Test

  • AASHTO T 49-2007 Standard Method of Test for Penetration of Bituminous Materials

KR-KS, Aggregate Penetration Test

  • KS K ISO 18695-2019 Textiles — Determination of resistance to water penetration — Impact penetration test
  • KS F 2607-2022 Standard test method for water vapour permeability for building materials
  • KS F 2610-2022 Standard test method for carbon dioxide permeability for building materials
  • KS K ISO 6530-2016 Protective clothing－Protection against liquid chemicals－Test method for resistance of materials to penetration by liquids
  • KS K ISO 811-2021 Textiles — Determination of resistance to water penetration —Hydrostatic pressure test
  • KS F 2581-2013(2023) Standard test method for determination of aggregates impacting value?Method of test for production control of aggregate

American Society for Testing and Materials (ASTM), Aggregate Penetration Test

  • ASTM C1701/C1701M-17a Standard Test Method for Infiltration Rate of In Place Pervious Concrete
  • ASTM C1701/C1701M-17 Standard Test Method for Infiltration Rate of In Place Pervious Concrete
  • ASTM D5/D5M-13 Standard Test Method for Penetration of Bituminous Materials
  • ASTM D5084-03 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM F1407-12 Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeationmdash;Permeation Cup Method
  • ASTM D7760-12 Standard Test Method for Measurement of Hydraulic Conductivity of Tire Derived Aggregates Using a Rigid Wall Permeameter
  • ASTM D5-65 Standard Method Of Test For Penetration Of Bituminous Materials
  • ASTM D5-73(1978) Standard Test Method for Penetration Of Bituminous Materials
  • ASTM D5-06e1 Standard Test Method for Penetration of Bituminous Materials
  • ASTM D5-06 Standard Test Method for Penetration of Bituminous Materials
  • ASTM C577-07 Standard Test Method for Permeability of Refractories
  • ASTM D5-97 Standard Test Method for Penetration of Bituminous Materials
  • ASTM C577-99 Standard Test Method for Permeability of Refractories
  • ASTM D5/D5M-19a Standard Test Method for Penetration of Bituminous Materials
  • ASTM D5/D5M-19 Standard Test Method for Penetration of Bituminous Materials
  • ASTM A342/A342M-99 Standard Test Methods for Permeability of Feebly Magnetic Materials
  • ASTM C577-07e1 Standard Test Method for Permeability of Refractories
  • ASTM D5-05 Standard Test Method for Penetration of Bituminous Materials
  • ASTM D5-05a Standard Test Method for Penetration of Bituminous Materials
  • ASTM C577-07e2 Standard Test Method for Permeability of Refractories
  • ASTM D5/D5M-20 Standard Test Method for Penetration of Bituminous Materials
  • ASTM C577-19 Standard Test Method for Permeability of Refractories
  • ASTM A342/A342M-21 Standard Test Methods for Permeability of Weakly Magnetic Materials
  • ASTM C577-07(2014) Standard Test Method for Permeability of Refractories
  • ASTM F1407-99a(2006) Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method
  • ASTM F1407-12(2017) Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method
  • ASTM E814-06 Standard Test Method for Fire Tests of Through-Penetration Fire Stops
  • ASTM C1701/C1701M-17a(2023) Standard Test Method for Infiltration Rate of In Place Pervious Concrete
  • ASTM E96-00e1 Standard Test Methods for Water Vapor Transmission of Materials
  • ASTM E96-00 Standard Test Methods for Water Vapor Transmission of Materials
  • ASTM E96/E96M-05 Standard Test Methods for Water Vapor Transmission of Materials
  • ASTM F903-99a Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
  • ASTM F1407-99a Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method
  • ASTM D3385-09 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
  • ASTM E96/E96M-13 Standard Test Methods for Water Vapor Transmission of Materials
  • ASTM E96/E96M-14 Standard Test Methods for Water Vapor Transmission of Materials
  • ASTM F1407-11 Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method
  • ASTM C1125-89(2004)e1 Standard Test Method for Penetration Index of Asbestos
  • ASTM D5084-00e1 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM D5084-00 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM E2945-14 Standard Test Method for Film Permeability Determination Using Static Permeability Cells
  • ASTM C1781/C1781M-21 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
  • ASTM F903-03 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
  • ASTM F903-03(2004) Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
  • ASTM D3385-94 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
  • ASTM C1781/C1781M-13 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
  • ASTM C1781/C1781M-14 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
  • ASTM C1781/C1781M-14a Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
  • ASTM C1781/C1781M-15 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
  • ASTM E514-06 Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E514-02 Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E514-90(1996)e1 Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E514-08 Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E514/E514M-20 Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E514/E514M-14 Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E165-09 Standard Practice for Liquid Penetrant Examination for General Industry
  • ASTM F1671-03 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
  • ASTM F119-82(2002) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
  • ASTM D4194-03 Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
  • ASTM D4194-03(2008) Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
  • ASTM F1929-12 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
  • ASTM E165-02 Standard Test Method for Liquid Penetrant Examination
  • ASTM E165-95 Standard Test Method for Liquid Penetrant Examination
  • ASTM F119-82(2008) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
  • ASTM F903-18 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
  • ASTM F903-17 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
  • ASTM F1671/F1671M-13 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
  • ASTM D5093-90(1997) Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
  • ASTM D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
  • ASTM D5093-15 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
  • ASTM F1927-07 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
  • ASTM D7100-04 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions that may Alter Hydraulic Conductivity
  • ASTM D1586-99 Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils
  • ASTM D3441-16 Standard Test Method for Mechanical Cone Penetration Testing of Soils
  • ASTM C1125-89(1999)e1 Standard Test Method for Penetration Index of Asbestos
  • ASTM C1125-89(2004) Standard Test Method for Penetration Index of Asbestos
  • ASTM E1417/E1417M-11 Standard Practice for Liquid Penetrant Testing
  • ASTM D243-97 Standard Test Method for Residue of Specified Penetration
  • ASTM C1125-89(2015) Standard Test Method for Penetration Index of Asbestos
  • ASTM D243-02 Standard Test Method for Residue of Specified Penetration
  • ASTM D243-08 Standard Test Method for Residue of Specified Penetration
  • ASTM C1125-89(2009) Standard Test Method for Penetration Index of Asbestos
  • ASTM E1417/E1417M-16 Standard Practice for Liquid Penetrant Testing
  • ASTM D6807-17 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 μS/cm
  • ASTM F1670/F1670M-08(2014)e1 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
  • ASTM F1927-98(2004) Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
  • ASTM F1927-98e1 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
  • ASTM D5452-00 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
  • ASTM D5117-09 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
  • ASTM D5093-02 Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
  • ASTM D5093-02(2008) Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
  • ASTM F903-10 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
  • ASTM E1417-05e1 Standard Practice for Liquid Penetrant Testing
  • ASTM E1417-05 Standard Practice for Liquid Penetrant Testing
  • ASTM E1417/E1417M-11e1 Standard Practice for Liquid Penetrant Testing
  • ASTM D217-21a Standard Test Methods for Cone Penetration of Lubricating Grease
  • ASTM D243/D243M-14 Standard Test Method for Residue of Specified Penetration
  • ASTM E1417/E1417M-13 Standard Practice for Liquid Penetrant Testing
  • ASTM C136/C136M-14 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
  • ASTM D3385-18 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
  • ASTM D780-95(1999) Standard Test Method for Printing Ink Permeation of Paper (Castor Oil Test)
  • ASTM D5117-03 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
  • ASTM E1418-98 Standard Test Method for Visible Penetrant Examination Using the Water-Washable Process
  • ASTM E1418-16 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
  • ASTM F1670-03 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
  • ASTM F1194-99 Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
  • ASTM F1670-98 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
  • ASTM F1194-99(2005) Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
  • ASTM D8132/D8132M-17 Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement
  • ASTM F119-82(2022) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
  • ASTM F119-82(2015) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
  • ASTM E514-05 Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E514-05a Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E514-05b Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E514-05c Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM D3816/D3816M-96(2001) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
  • ASTM D4525-90(1995)e1 Standard Test Method for Permeability of Rocks by Flowing Air
  • ASTM D4525-90(2001) Standard Test Method for Permeability of Rocks by Flowing Air
  • ASTM D3816/D3816M-96(2003) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
  • ASTM D3816/D3816M-96e1 Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
  • ASTM D3816/D3816M-96(2020) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
  • ASTM E2178-11 Standard Test Method for Air Permeance of Building Materials
  • ASTM D4525-13 Standard Test Method for Permeability of Rocks by Flowing Air
  • ASTM D4525-13e1 Standard Test Method for Permeability of Rocks by Flowing Air
  • ASTM D5084-10 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM C1781/C1781M-18e1 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
  • ASTM C1781/C1781M-18 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
  • ASTM A341/A341M-00(2005) Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
  • ASTM D780-95(2003) Standard Test Method for Printing Ink Permeation of Paper (Castor Oil Test)
  • ASTM C1091-03a(2018) Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
  • ASTM F2487-13(2017) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
  • ASTM F1670-07 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
  • ASTM F1306-16 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
  • ASTM F2053-00(2023) Standard Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials
  • ASTM D5117-17 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
  • ASTM D1586-11 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
  • ASTM C803-79 Standard Test Method for Penetration Resistance Of Hardened Concrete
  • ASTM D3816/D3816M-96(2007) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
  • ASTM C803/C803M-03 Standard Test Method for Penetration Resistance of Hardened Concrete
  • ASTM C803/C803M-03(2010) Standard Test Method for Penetration Resistance of Hardened Concrete
  • ASTM C803/C803M-97e1 Standard Test Method for Penetration Resistance of Hardened Concrete
  • ASTM D4194-95 Standard Test Methods for Operating Characteristics of Reverse Osmosis Devices
  • ASTM D5052-00 Standard Test Method for Permeability of Leather to Water Vapor
  • ASTM E1135-19 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
  • ASTM C803/C803M-18 Standard Test Method for Penetration Resistance of Hardened Concrete
  • ASTM D4525-13e2 Standard Test Method for Permeability of Rocks by Flowing Air
  • ASTM D5052-18(2023) Standard Test Method for Permeability of Leather to Water Vapor
  • ASTM D5052-18 Standard Test Method for Permeability of Leather to Water Vapor
  • ASTM D3816/D3816M-96(2012) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
  • ASTM E1135-12 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
  • ASTM C803/C803M-17 Standard Test Method for Penetration Resistance of Hardened Concrete
  • ASTM D3385-03 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
  • ASTM F2053-00(2017) Standard Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials
  • ASTM D7760-18 Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter
  • ASTM E1418-04 Standard Test Method for Visible Penetrant Examination Using the Water-Washable Process
  • ASTM D2684-10 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products

Professional Standard - Water Conservancy, Aggregate Penetration Test

GM Holden Ltd, Aggregate Penetration Test

CEN - European Committee for Standardization, Aggregate Penetration Test

  • EN ISO 3452-2:2006 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
  • PREN 12697-19-2018 Bituminous mixtures - Test methods - Part 19: Permeability of specimen
  • EN ISO 17892-11:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests
  • EN ISO 22282-5:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests

European Committee for Standardization (CEN), Aggregate Penetration Test

  • EN ISO 3452-2:2000 Non-Destructive Testing - Penetrant Testing - Part 2: Testing of Penetrant Materials ISO 3452-2: 2000
  • EN ISO 3452-2:2021 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2021)
  • EN ISO 3452-2:2013 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
  • EN ISO 12706:2009 Non-destructive testing - Penetrant testing - Vocabulary (ISO 12706:2009)
  • EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
  • EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008)
  • EN ISO 3452-4:1998 Non-Destructive Testing - Penetrant Testing - Part 4: Equipment ISO 3452-4:1998
  • EN 10228-2:2016 Non-destructive testing of steel forgings - Part 2: Penetrant testing
  • prEN 369-1992 Protective clothing; protection against liquid chemicals; test method: resistance of materials to permeation by liquids
  • prEN ISO 6530 rev Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids
  • prEN 933-11-2021 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate
  • CEN EN 13726-2-2002 Test Methods for Primary Wound Dressings - Part 2: Moisture Vapour Transmission Rate of Permeable Film Dressings

RU-GOST R, Aggregate Penetration Test

Society of Automotive Engineers (SAE), Aggregate Penetration Test

  • SAE J2996-2013 Small Diameter Fuel Line Permeation Test Procedure
  • SAE J426-1991 Liquid Penetrant Test Methods
  • SAE AS3071B-2012 Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection
  • SAE AS3071A-1995 ACCEPTANCE CRITERIA - MAGNETIC PARTICLE, FLUORESCENT PENETRANT, AND CONTRAST DYE PENETRANT INSPECTION
  • SAE AS3071-1971 ACCEPTANCE CRITERIA - MAGNETIC PARTICLE, FLUORESCENT PENETRANT, AND CONTRAST DYE PENETRANT INSPECTION
  • SAE J2665-2006 Test Procedure to Measure the Fuel Permeability of Materials by the Cup Weight Loss Method

PL-PKN, Aggregate Penetration Test

  • PN B06717-1992 Fillings for biological percolating filters with the mineral and artifical aggregates for treatment of sewage
  • PN O79170-1963 Packages. Watervapour permeability test
  • PN B06714-44-1986 Mineral aggregates Testings Determination kind of light weight aggregates
  • PN B06714-15-1991 Mineral aggregates Testing Sieve analysis

German Institute for Standardization, Aggregate Penetration Test

  • DIN EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C (ISO 3452-6:2008); English version of DIN EN ISO 3452-6:2009-04
  • DIN EN ISO 3452-2:2006 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2006); English version of DIN EN ISO 3452-2:2006-11
  • DIN EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C (ISO 3452-5:2008); English version of DIN EN ISO 3452-5:2009-04
  • DIN EN ISO 3452-2:2022-02 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2021); German version EN ISO 3452-2:2021
  • DIN EN 12697-19:2020 Bituminous mixtures - Test methods - Part 19: Permeability of specimen
  • DIN 19682-7:2015-08 Soil quality - Field tests - Part 7: Determination of infiltration rate by double ring infiltrometer
  • DIN EN 13726-2:2002-06 Test methods for primary wound dressings - Part 2: Moisture vapour transmission rate of permeable film dressings; German version EN 13726-2:2002 / Note: To be replaced by DIN EN 13726 (2021-02).
  • DIN ISO 4003:1990 Permeable sintered metal materials; determination of bubble test pore size; identical with ISO 4003:1977
  • DIN EN 10228-2:1998 Non-destructive testing of steel forgings - Part 2: Penetrant testing; German version EN 10228-2:1998
  • DIN EN ISO 3452-2:2014 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013); German version EN ISO 3452-2:2013
  • DIN EN 933-11:2021-04 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate; German and English version prEN 933-11:2021 / Note: Date of issue 2021-03-12*Intended as replacement for DIN EN 933-11 (201...
  • DIN EN 933-11:2021 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate; German and English version prEN 933-11:2021
  • DIN EN 933-11:2011-05 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate; German version EN 933-11:2009 + AC:2009 / Note: To be replaced by DIN EN 933-11 (2021-04).
  • DIN EN 20811:1992 Determination of resistance of textile fabrics to water penetration; hydrostatic pressure test (ISO 811:1981); german version EN 20811:1992
  • DIN EN 13087-3:2000 Protective helmets - Test methods - Part 3: Resistance to penetration; German version EN 13087-3:2000
  • DIN EN ISO 811:2018-08 Textiles - Determination of resistance to water penetration - Hydrostatic pressure test (ISO 811:2018); German version EN ISO 811:2018
  • DIN 51935:2019-07 Testing of carbonaceous materials - Determination of the coefficient of permeability by means of the vacuum-decay method with air as experimental gas - Solid materials

ES-UNE, Aggregate Penetration Test

  • UNE-EN ISO 3452-2:2022 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2021)
  • UNE-EN 933-11:2009/AC:2010 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate
  • UNE-EN 13726-2:2003 ERRATUM Test methods for primary wound dressings. Part 2: Moisture vapour transmission rate of permeable film dressings.

TH-TISI, Aggregate Penetration Test

  • TIS 1201-1993 Standard test method for penetration of bituminous materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Aggregate Penetration Test

  • GB/T 18851.2-2005 Non-destructive testing-Penetrant testing-Part 2:Testing of penetrant materials
  • GB/T 18851.2-2008 Non-destructive testing.Penetrant testing.Part 2:Testing of penetrant materials
  • GB/T 9357-2008 Instrument for soil test.Permeameter
  • GB/T 32373-2015(英文版) Test methods for reverse osmosis membranes
  • GB/T 1969-1996 Test method for permeability of porous ceramic
  • GB/T 18851-2002 Non-destructive testing--Penetrant testing Reference Test blocks
  • GB/T 5249-1985 Permeable sintered metal materials--Determination of bubble test pore size
  • GB/T 5249-2013 Permeable sintered metal materials.Determination of bubble test pore size
  • GB/T 15330-1994 Test method for water penetration rate of pressure-sensitive tapes
  • GB/T 2842-1981 Test method for lightweight aggregates
  • GB/T 15147-1994 The liquid penetrant examination for component parts of nuclear fuel assemblies
  • GB/T 23462-2009 Protective clothing.Test method for chemical protective materials to permeation by chemicals

BE-NBN, Aggregate Penetration Test

Standard Association of Australia （SAA）, Aggregate Penetration Test

  • AS 4420.4:1996 Windows - Methods of test - Air infiltration test
  • AS 4420.5:1996 Windows - Methods of test - Water penetration resistance test
  • AS 1774.7:2001 Refractories and refractory materials - Physical test methods - Permeability to gases
  • AS/NZS 1462.8:1998 Methods of test for plastics pipes and fittings Method 8: Method of test for infiltration
  • AS/NZS ISO 6530:2006 Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids

VN-TCVN, Aggregate Penetration Test

SE-SIS, Aggregate Penetration Test

FI-SFS, Aggregate Penetration Test

IT-UNI, Aggregate Penetration Test

Professional Standard - Machinery, Aggregate Penetration Test

  • JB/T 7523-1994 Technical requirements for materials used in penetrant testing

Military Standard of the People's Republic of China-General Armament Department, Aggregate Penetration Test

  • GJB 2709-1996 Test method for low temperature gas permeability coefficient of organic materials
  • GJB 465.2-1988 Test methods for vulcanized rubber resistance to anhydrous hydrazine Part 2: Penetration test

RO-ASRO, Aggregate Penetration Test

  • STAS 1913/6-1976 Foundation ground LABORATORY PERMEABILITY TEST
  • STAS SR EN 24003-1996 Permeable sintered metal materials. Determination of bubble test pore size
  • STAS 9569-1982 WOVEN FABRICS Determination of the resistance to water penetration (Hydrostatic pressure test)

CZ-CSN, Aggregate Penetration Test

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Aggregate Penetration Test

  • GB/T 33732-2017 Textiles—Determination of resistance to water penetration—Impact penetration test
  • GB/T 34437-2017 Test method of the oxygen permeability of the multilayer composite plastics pipe

American National Standards Institute （ANSI), Aggregate Penetration Test

Jiangsu Provincial Standard of the People's Republic of China, Aggregate Penetration Test

Indonesia Standards, Aggregate Penetration Test

  • SNI 04-3867-1995 Method for determination of permeability strength of insulating oils
  • SNI ASTM C803:2012 Metode uji ketahanan beton keras terhadap penetrasi
  • SNI ASTM C136:2012 Test methods for sieve analysis of fine and coarse aggregates
  • SNI ISO 811:2013 Textiles Fabrics - Determination of resistance water penetration - Hydrostatic pressure test

NZ-SNZ, Aggregate Penetration Test

  • NZS 4407.3.1:1991 Methods of testing road aggregates - Laboratory tests - Test 3.1 The water content of aggregate
  • NZS 4407.3.14:1991 Methods of sampling and testing road aggregates Test 3.14 The broken faces content of aggregate
  • NZS 4407.3.7.2:1991 Methods of sampling and testing road aggregates Test 3.7.2 Immersion in water method for coarse aggregate

Danish Standards Foundation, Aggregate Penetration Test

  • DS/ISO 4003:1994 Permeable sintered metal materials - Determination of bubble test pore size
  • DS/EN 13726-2:2002 Test methods for primary wound dressings - Part 2: Moisture vapour transmission rate of permeable film dressings
  • DS/EN 12697-19:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen
  • DS/EN 369:1994 Protective clothing - Protection against liquid chemicals - Test method: Resistance of materials to permeation by liquids
  • DS/EN ISO 6530:2005 Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids
  • DS/EN 933-11/AC:2010 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate
  • DS/EN 933-11:2009 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate
  • DS/ISO 811:1982 Textile fabrics. Determination of resistance to water penetration. Hydrostatic pressure test

ES-AENOR, Aggregate Penetration Test

Professional Standard - Petroleum, Aggregate Penetration Test

  • SY 0064-2000 Water permeability test method for pipeline anticorrosion
  • SY/T 0064-2000 Test method for water permeability of pipeline anti-corrosion coating

National Metrological Technical Specifications of the People's Republic of China, Aggregate Penetration Test

TR-TSE, Aggregate Penetration Test

  • TS 118-1964 STANDARD METHODS OF TEST FOR PENETRATION OF BITUMINOUS MATERIALS
  • TS 1079-1972 METHOD OP TEST FOR RESIDUE OF SPECTFIED PENETRATION FOR BITUMINOUS MATERIALS
  • TS 257-1978 METHOD OF TEST FOR RESISTANCE OF FABRICS TO PENETRATION BY WATER — HYDROSTAT1C HEAD TEST

Lithuanian Standards Office , Aggregate Penetration Test

  • LST EN 13726-2-2002 Test methods for primary wound dressings - Part 2: Moisture vapour transmission rate of permeable film dressings
  • LST EN 24003-2002 Permeable sintered metal materials - Determination of bubble test pore size (ISO 4003:1977)
  • LST EN 12697-19-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen
  • LST EN 933-11-2009 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate
  • LST EN 933-11-2009/AC-2010 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate
  • LST EN 20811-1997 Textiles - Determination of resistance to water penetration - Hydrostatic pressure test

YU-JUS, Aggregate Penetration Test

  • JUS C.A2.031-1978 Permeable sintered metal materiah - determination ofbubbk test pore si?e

ICEA - Insulated Cable Engineers Association Inc., Aggregate Penetration Test

  • T-31-610-1994 A LONGITUDINAL WATER PENETRATION RESISTANCE TEST FOR SEALED CONDUCTOR

国家市场监督管理总局、中国国家标准化管理委员会, Aggregate Penetration Test

  • GB/T 15330-2020 Test method for water penetration rate of pressure-sensitive tapes
  • GB/T 40938-2021 Leather—Physical and mechanical tests—Determination of water penetration pressure
  • GB/T 40260-2021 Test method for determining gas permeability of polymer membrane materials

Hebei Provincial Standard of the People's Republic of China, Aggregate Penetration Test

工业和信息化部, Aggregate Penetration Test

  • YB/T 5290-2017 Test method for molten iron permeability of blast furnace carbon blocks

能源部, Aggregate Penetration Test

  • SY 0064-1992 Test method for water permeability of pipeline anti-corrosion layer

UY-UNIT, Aggregate Penetration Test

Professional Standard - Aerospace, Aggregate Penetration Test

  • QJ 2194-1991 Test method for gas permeability coefficient of organic materials

GB-REG, Aggregate Penetration Test

AASHTO - American Association of State Highway and Transportation Officials, Aggregate Penetration Test

  • T 206-2003 Standard Method of Test for Penetration Test and Split-Barrel Sampling of Soils
  • T 206-2009 Standard Method of Test for Penetration Test and Split-Barrel Sampling of Soils
  • T 259-2002 Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration

GM Daewoo, Aggregate Penetration Test

  • GMKOREA EDS-T-7655-2012 Test Method for Determining Water Vapour Permeability of Upholstery Trim Materials ??? ????? ??? ???? Version 3; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14140 [Re

Professional Standard - Railway, Aggregate Penetration Test

CU-NC, Aggregate Penetration Test

  • NC 54-296-1984 Construction Materials and Products. Soila Statlo Penatration Testing Method
  • NC 54-141-1986 Construction Materials and Products. Soils. Permeability Determination in Laboratory

IN-BIS, Aggregate Penetration Test

AENOR, Aggregate Penetration Test

  • UNE-EN 12697-19:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen
  • UNE-EN 933-11:2009 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate
  • UNE-EN 13726-2:2002 Test methods for primary wound dressings. Part 2: Moisture vapour transmission rate of permeable film dressings.

AT-ON, Aggregate Penetration Test

  • ONORM EN 369-1993 Protective clothing - Protection against liquid chemicals -Test method: Resistance of materials to permeation by liquids
  • OENORM EN 933-11-2021 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate
  • ONORM EN 368-1993 Protective clothing for use against liquid chemicals -Test method: Resistance of materials to penetration by liquids

Insulated Cable Engineers Association （ICEA), Aggregate Penetration Test

  • ICEA T-31-610-1994 Conducting a Longitudinal Water Penetration Resistance Test for Sealed Conductor

国家能源局, Aggregate Penetration Test

  • NB/T 35117-2018 Procedures for oscillating penetration testing of boreholes in hydropower projects

Group Standards of the People's Republic of China, Aggregate Penetration Test

  • T/SHBA 002-2023 Method for skin penetration test in vitro for cosmetics products

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Aggregate Penetration Test

  • GJB 5854-2006 Inspection, liquid penetrant and magnetic particle, soundness requirements for materials,parts and weldments

International Electrotechnical Commission (IEC), Aggregate Penetration Test

  • IEC 62788-6-2:2020 Measurement procedures for materials used in photovoltaic modules - Part 6-2: General tests - Moisture permeation testing of polymeric materials

European Association of Aerospace Industries, Aggregate Penetration Test

  • AECMA PREN 2002-16-1989 Aerospace Series Test Methods for Metallic Materials Part 16: Method for Penetrant Flow Detection
  • AECMA PREN 2002-16-2000 Aerospace Series Metallic Materials Test Methods Part 16: Non-Destructive Testing Penetrant Testing Edition P 1
  • AECMA PREN 2002-16-1999 Aerospace Series Metallic Materials Test Methods Non-Destructive Testing Part 16: Penetrant Testing Edition P1

Professional Standard - Textile, Aggregate Penetration Test

  • FZ/T 01124-2014 Textiles.Test method for resistance of fabric to penetration by acids or alkalis solution
  • FZ/T 01038-1994 Test method for water resistance of textiles and rain permeability

PK-PSQCA, Aggregate Penetration Test

  • PS 144-1961 DETERMINATION OF RESISTANCE OF FABRICS TO PENETRATION BY WATER (HYDROSTATIC HEAD TEST)

Taiwan Provincial Standard of the People's Republic of China, Aggregate Penetration Test

  • CNS 13349-1994 Method of Test for Grease Resistance of Paper and Paperboard (Palm Oil Method)
  • CNS 12087-1987 Method of Test for Fiber Optic Devices (FOPT-55 Fluid Penetration Test for Filled Fiber Optic Cable)

(U.S.) Telecommunications Industries Association , Aggregate Penetration Test

  • TIA-455-82B-1992 FOTP 82-B Fluid Penetration Test for Fluid-Blocked Fiber Optic Cable (ANSI APPROVAL WITHDRAWN JUNE 2003)

BR-ABNT, Aggregate Penetration Test

  • ABNT NBR 14025-2008 Nonwoven - Determination of resistance to water penetration - Hydrostatic pressure test

Guangdong Provincial Standard of the People's Republic of China, Aggregate Penetration Test

PH-BPS, Aggregate Penetration Test

  • PNS ISO 17892-11:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests

Aerospace, Security and Defence Industries Association of Europe (ASD), Aggregate Penetration Test

  • ASD-STAN PREN 2002-16-2000 Aerospace Series Metallic Materials Test Methods Part 16: Non-Destructive Testing Penetrant Testing (Edition P 1)

  Penetration Test Protocol, Standard Penetration Test, penetration test, Dye Penetration Test, Penetration Field Test, Permeability test, penetration test, Fine Aggregate Test, Standard Penetration Test, dye penetrant test, Permeability test, Field Penetration Test, Pavement Penetration Test, Material Penetration Test, Cell Penetration Assay, Coarse Aggregate Test Method, Clay Penetration Test, Aggregate Penetration Test, Solvent Penetration Test, Penetration resistance test.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved