ZH
RU
ES

check

check, Total:418 items.

In the international standard classification, check involves: Graphic technology, Measurement of fluid flow, Acoustics and acoustic measurements, Measurement of time, velocity, acceleration, angular velocity, Linear and angular measurements, Measurement of force, weight and pressure, Cutting tools, Protection against electric shock, Installations in buildings, Geology. Meteorology. Hydrology, Hydraulic energy engineering, Vibrations, shock and vibration measurements, Plant and equipment for the food industry, Character sets and information coding, Valves, Products of the chemical industry, Burners. Boilers, Protection against excessive pressure, Construction equipment, Shafts and couplings, Electricity. Magnetism. Electrical and magnetic measurements, Fluid power systems, Equipment for petroleum and natural gas industries, Mechanical testing, Testing of metals, Thermodynamics and temperature measurements, Rotating machinery, Power stations in general, Mining equipment, Test conditions and procedures in general, Mining and quarrying, Non-destructive testing, Industrial trucks, Paper and board, Environmental protection, Power transmission and distribution networks, Measurement of volume, mass, density, viscosity, Transport, Terminology (principles and coordination), Information technology (IT) in general, Springs, FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE, Industrial automation systems, Tyres, Sports equipment and facilities, Internal combustion engines for road vehicles, Analytical chemistry, Data storage devices, Electrical accessories, Microprocessor systems, Bearings, Open systems interconnection (OSI), Shipbuilding and marine structures in general, Quality, Transformers. Reactors, Solar energy engineering, Audio, video and audiovisual engineering, Insulating materials, Capacitors, Electrical engineering in general, Flexible drives and transmissions, Interface and interconnection equipment, Integrated circuits. Microelectronics, Road vehicle systems, Semiconductor devices, Welding, brazing and soldering, Milk and milk products, Internal combustion engines, Fibre optic communications, Aerospace electric equipment and systems, Radiation measurements, Fluid storage devices, Insulating fluids, Ferrous metals, Metrology and measurement in general, Powder metallurgy, IT terminal and other peripheral equipment, Sensory analysis, Applications of information technology, Road vehicles in general, Pipeline components and pipelines.


German Institute for Standardization, check

  • DIN 16527-1:1993 Printing technology; control patch, control image, control mark; terms
  • DIN 70027:1992 Road vehicles; specifications for wheel alignment
  • DIN EN ISO 7500-2:2007 Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006); English version of DIN EN ISO 7500-2:2007-04
  • DIN 20182:1989 Knotted link chain hoisting clothes in pithead baths; unproofed, non-calibrated
  • DIN 10286:1976 Van Gulik cheese butyrometer; 0 to 40%, calibrated
  • DIN ISO 17657-4:2006 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system (ISO 17657-4:2005);English version of DIN ISO 17657-4:2006-02
  • DIN EN ISO 17657-4:2007 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system (ISO 17657-4:2005); English version of DIN EN ISO 17657-4:2007-09

British Standards Institution (BSI), check

  • BS ISO TR 7066-1:1997 Assessment of uncertainty in calibration and use of flow measurement devices - Linear calibration relationships
  • BS ISO 7278-4:1999 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Guide for operators of pipe provers
  • BS 7580-1:1992 Specification for the verification of sound level meters - Comprehensive procedure
  • BS ISO 22915-1:2009 Industrial trucks. Verification of stability. General
  • BS ISO 22915-1:2008 Industrial trucks - Verification of stability - General
  • BS ISO 10191:2010 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
  • BS ISO 1132-2:2002 Rolling bearings. Tolerances. Measuring and gauging principles and methods
  • BS EN ISO 17657-4:2006 Resistance welding - Welding current measurement for resistance welding - Calibration system
  • BS ISO 7278-1:1990 Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. General principles
  • BS EN 4057-407:2006 Aerospace series - Cable ties for harnesses - Test methods - Verification of application tool settings
  • BS EN 4057-407:2005 Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings
  • BS ISO 12917-1:2002 Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Manual methods
  • DD ENV 41208-2-1991 Information Systems Interconnection. Basic class virtual terminal. S-mode forms. Check list
  • BS ISO 12917-1:2017 Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanks. Manual methods
  • BS EN ISO 3738-2:2006 Hardmetals - Rockwell hardness test (scale A) - Preparation and calibration of standard test blocks
  • BS ISO/IEC 9798-4:1999 Information technology. Security techniques. Entity authentication. Mechanisms using a cryptographic check function
  • DD ENV 41208-3-1991 Information Systems Interconnection. Basic class virtual terminal. S-mode forms. Underlying layers check list
  • BS ISO 15560:1998 Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
  • BS ISO 15560:1999 Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
  • BS EN ISO 14577-2:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
  • BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
  • DD ENV 41213-3-1993 Information systems interconnection. Virtual terminal. Basic class. A-mode Telnet. Underlying layers check list
  • BS ISO 12917-2:2002 Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Internal electro-optical distance-ranging method

Japanese Industrial Standards Committee (JISC), check

  • JIS C 1515:1991 Sound calibrators
  • JIS C 60364-6-61:2006 Electrical installations of buildings -- Part 6-61: Verification -- Initial verification
  • JIS B 7738:2001 Verification of helical compression and extension springs testing machines
  • JIS D 3637:1996 Road vehicles -- Diesel fuel injection pump testing -- Calibrating injector
  • JIS C 5563:1996 Magnetic tape sound recording and reproducing systems Part 2: Calibration tapes
  • JIS X 0521-1:2005 Barcode verifier conformance specifications -- Part 1: Linear symbols
  • JIS B 1515-2:2006 Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods
  • JIS C 0364-6-61 AMD 2:2000 Electrical installations of buildings Part 6: Verification Chapter 61: Initial verification (Amendment 2)
  • JIS Q 17025:2000 General requirements for the competence of testing and calibration laboratories

Henan Provincial Standard of the People's Republic of China, check

Standard Association of Australia （SAA）, check

  • AS 2710:1984 Screw gauges - Verification
  • AS 4433.4:2001 Guide to the sampling of particulate materials - Checking for bias
  • AS 1816.2:2007 Metallic materials - Brinell hardness test - Verification and calibration of testing machines
  • AS/NZS 5911(Int):2005 General guidelines on the verification, validation and assurance of environmental and sustainability reports
  • AS/NZS ISO/IEC 9798.4:2008 Information technology - Security techniques - Entity authentication - Mechanisms using a cryptographic check function
  • AS 1815.2:2007 Metallic materials - Rockwell hardness test - Verification and calibration of testing machine (scales A, B, C, D, E, F, G, H, K, N, T)

U.S. Air Force, check

Professional Standard - Civil Aviation, check

  • MH 2003-2000 Flight inspection rule
  • MH/T 4032-2011 Technical requirement of civil aviation flight inspection. Radar
  • MH/T 4033-2011 Technical requirement of civil aviation flight inspection. ATC automation system

Professional Standard - Machinery, check

  • JB/T 599-2005 Pressure gauges tester
  • JB/T 9306-1999 Technical specification for transformer calibrator
  • JB/T 6293-1992 Specifications for hand-operated fuel injector calibrator
  • JB/T 6293-2006 Diesel engines.Testing of fuel injectors Hand-lever operated testing and setting apparatus
  • JB/T 9752.3-2004 Turbocharger - Balance quality requirements and check methods of rotors
  • JB/T 8957-1999 Method for verifying accuracy of tan delta measurements applicable to capacitors
  • JB/T 9752.3-2014 Turbochargers.Part 3: Balance quality requirements and check methods of rotors

Taiwan Provincial Standard of the People's Republic of China, check

Defense Logistics Agency, check

National Metrological Technical Specifications of the People's Republic of China, check

  • JJF 1472-2014 Calibration Specification for Process Calibrators
  • JJF(机械) 062-2009 Calibration specification of DJS timing calibrator
  • JJF 1284-2011 Calibration Specification of Calibrators for Electrical Meters
  • JJF 1995-2022 Calibration specification for electronic transformer calibrator
  • JJF 1923-2021 Calibration Specification for Verification Equipment of Electrical Measuring Devices
  • JJF 2027-2023 Calibration specification for merging unit calibrator for transformer
  • JJF(机械) 004-2008 Calibration specification for portable power transmitter calibrator
  • JJF(铁道) 701-2008 Comprehensive calibrator for test instrument of the train running and monitoring and recording equipment

Professional Standard - Water Conservancy, check

  • SL 114-2014 Code for calibration of oedometers
  • SL 137-1995 Method for calibration of length measuring instrument
  • SL 144.5-2008 Calibration method of centrifuge
  • SL 410-2007 Calibrating code for dynamic perforation test(con-drop test) instrument
  • SL 411-2007 Calibrating code for mechanical sieve shaker
  • SL 127-2017 Volume cylinder calibration method
  • SL 115-2014 Permeameter Calibration Method
  • SL 112-1995 Calibration method of compaction instrument
  • SL 111-1995 Permeable board calibration method
  • SL 111-2017 Permeable board calibration method
  • SL 112-2017 Calibration method of compaction instrument
  • SL 110-2014 Code for calibration of annular sword
  • SL 110-1995 Calibration method of soil cutting ring knife
  • SL 413-2007 Calibration code for bitumen ductility meter
  • SL 144.1-2008 Calibration method of biology microscopes
  • SL 144.3-2008 Calibration method of biochemical incubator
  • SL 144.8-2008 Calibration method of microwave heating system
  • SL 144.11-2008 Calibration method of control-temperature furnace
  • SL 121-2012 Calibrating methods of rock direct shear testing instrument
  • SL 130-2017 Concrete mold test verification method
  • SL 597-2012 Calibration method of anchor cable dynamometer
  • SL 133-2014 Calibration methods for water permeability testing instrument of concrete
  • SL 412-2007 Calibrating code for bitumen penetrometers
  • SL 133-1995 Method for calibration of apparatus for concrete resisting permeability
  • SL 144.10-2008 Calibration method of solid-phase extractor (SPE)
  • SL 408-2007 Calibrating code for impermeablility testing instrument of geomembranes
  • SL 407-2007 Calibrating code for permeability testing instrument of geomembranes
  • SL 125-2017 Cement mortar test mode verification method
  • SL 114-1995 Calibration method of lever consolidation instrument
  • SL 119-1995 Calibrating methods of rock treaxial testing apparatus
  • SL 119-2012 Calibrating methods of rock triaxial testing apparatus
  • SL 122-1995 Calibrating Methods of Measurement Instrument of Rock
  • SL 131-1995 Method for calibration of apparatus for concrete slump test
  • SL 144.4-2008 Calibration method of electro-thermal incubator
  • SL 144.6-2008 Calibration method of constant temperature water-bath
  • SL 144.7-2008 Calibration method of electric air blowing dryer
  • SL 144.9-2008 Calibration method of accelerated solvent extractor (ASE)
  • SL 122-2012 Calibrating methods of measurement instrument of rock deformation
  • SL 131-2017 Concrete slump meter calibration method
  • SL 414-2007 Calibration code for bitumen softening meter
  • SL 124-2014 Calibration methods for testing instrument of hydration heat of cement
  • SL 118-2014 Code for calibration of strain-controlled triaxial apparatus
  • SL 121-1995 Calibrating methods of rock direct shear testing instrument
  • SL 116-2012 Calibrating methods for strain-controlled direct shear apparatus
  • SL 116-1995 Calibration method of strain-controlled direct shear instrument
  • SL 118-1995 Calibration method of strain-controlled triaxial instrument
  • SL 409-2007 Calibrating code for flow testing instrument prefabricated drains
  • SL 128-2017 Calibration method of mixer for concrete test
  • SL 129-2017 Vibrating table calibration method for concrete testing
  • SL 113-2014 Code for calibration of photoelectric fall cone liquid limit and plastic limit device
  • SL 120-1995 Calibrating methods of sonic parameter measuring apparatus
  • SL 123-1995 Method for calibration of cement mortar flow tester
  • SL 132-1995 Method for calibration of vapor-pressure type air entrainment meter
  • SL 404-2007 Calibrating code for burst testing instrument of geosynthetics
  • SL 405-2007 Calibrating code for normal permeability testing instrument of geotextiles
  • SL 120-2012 Calibrating method for rock acoustic parameter measuring apparatus
  • SL 137-2017 Calibration method of mortar and concrete length measuring instrument
  • SL 115-1995 Calibration method of variable water head (constant water head) permeameter
  • SL 113-1995 Calibration method of photoelectric liquid-plastic limit tester
  • SL 406-2007 Geotextile plane permeability meter calibration procedures
  • SL 134-2017 Calibration method of concrete rapid freeze-thaw test machine
  • SL 136-1995 Test method for adiabatic temperature rise tester
  • SL 144.2-2008 Calibration method of multi-parameter water quality sonde
  • SL 136-2017 Calibration method of concrete thermal parameter tester
  • SL 117-2014 Code for calibration of strain-controlled unconfined compression apparatus
  • SL 124-1995 Method for calibration of cement hydration heat (direct method) tester
  • SL 135-1995 Test method for dynamic elastic concrete modulus tester
  • SL/T 232-1999 Verification method of dynamic liquid discharge and flow velocity facilities
  • SL/T 233-1999 Verification method of common instrument in hydraulic and river model
  • SL 403-2007 Calibrating code for comprehensive testing apparatus of geosynthetis
  • SL 135-2017 Calibration method of concrete dynamic elastic modulus tester
  • SL 117-1995 Calibration method of strain-controlled unconfined compressometer
  • SL 233-2016 Calibration methods of commonly used instruments for hydraulic and river engineering model tests
  • SL 598-2012 Calibration method for metering system of periodic concrete mixing plant (station)
  • SL 132-2017 Calibration method of concrete mixture gas content tester (pneumatic type)
  • SL 144-1995 Check method of water environmental detecting instrument and experimental equipment
  • SL 144-1995（条文说明） Calibration (inspection) method of water environment testing instruments and test equipment

Professional Standard - Traffic, check

水利部, check

  • SL/T 111-2017 Permeable board calibration method
  • SL/T 127-2017 Capacity cylinder calibration method
  • SL/T 115-2014 Penetration meter calibration method
  • SL/T 112-2017 Compaction instrument calibration method
  • SL/T 114-2014 Consolidation instrument calibration method
  • SL/T 110-2014 Soil cutting ring knife calibration method
  • SL 509-2012 Grouting recorder calibration method
  • SL/T 130-2017 Concrete test mold verification method
  • SL/T 125-2017 Cement mortar test mold verification method
  • SL/T 133-2014 Calibration method of concrete impermeability meter
  • SL/T 131-2017 Calibration method of concrete slump meter
  • SL/T 118-2014 Calibration method of strain controlled triaxial instrument
  • SL/T 124-2014 Calibration method of cement hydration heat meter
  • SL/T 128-2017 Calibration method of mixer for concrete experiment
  • SL/T 129-2017 Calibration method of vibration table for concrete testing
  • SL/T 137-2017 Calibration method of mortar and concrete tensiometer
  • SL/T 113-2014 Calibration method of photoelectric liquid plastic limit measuring instrument
  • SL/T 134-2017 Calibration method of concrete rapid freeze-thaw testing machine
  • SL/T 756-2017 Calibration method of special instruments for geotechnical in-situ testing
  • SL 123-2012 Calibration method of cement mortar fluidity tester
  • SL/T 136-2017 Calibration method of concrete thermal parameter measuring instrument
  • SL/T 117-2014 Calibration method for strain-controlled unconfined compression instrument
  • SL 536-2011 Calibration method of X-ray diffraction stress measuring device
  • SL/T 135-2017 Calibration method of concrete dynamic elastic modulus measuring instrument
  • SL/T 233-2016 Commonly used instrument calibration methods for hydraulic and river engineering model tests
  • SL/T 132-2017 Calibration method of concrete mixture air content meter (air pressure type)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, check

  • GB/T 25918-2010 Portable calibration instrument for water meters
  • GB/T 7662-1987 Method of verification for vertical balancing machines
  • GB/T 30952-2014 Calibration method of water level gauge test equipment
  • GB/T 17710-1999 Data processing--Check character systems
  • GB/T 4201-1984 Method of verification for universal horizontal balancing machines
  • GB/T 17368-1998 Calibrating rule of using fuel injection pump test-bench
  • GB/T 17710-2008 Information technology.Security technique.Check character systems
  • GB/T 32291-2015 Offline inspection and evaluation of high and super-high pressure safety valves
  • GB/T 10628-2008 Gas analysis.Comparison methods for determining and checking the composition of calibration gas mixtures
  • GB/T 11259-1999 Standard practice for fabrication and control of steel reference blocks used in ultrasonic inspection
  • GB/T 12310-1990 Sensory analysis method--Paired comparison test

未注明发布机构, check

National Metrological Verification Regulations of the People's Republic of China, check

Association Francaise de Normalisation, check

  • NF V03-915:1987 Oilseeds. Check of the calibration of moisture meters.
  • NF E05-053:1987 SURFACE TEXTURE OF PRODUCTS. CALIBRATION SPECIMENS FOR STYLUS INSTRUMENTS. TYPES,CALIBRATION AND USE OF SPECIMENS.
  • NF X50-061:2000 General requirements for the competence of testing and calibration laboratories.

Group Standards of the People's Republic of China, check

  • T/SASE 006-2022 Calibration method of elevator speed limiter
  • T/NTAS 001-2017 Calibration procedure for elevator speed limiter
  • T/NTTX 001-2017 Calibration procedure for elevator speed limiter
  • T/GDASE 0018-2020 Safety Valve Periodical Check and Test
  • T/SSM 002-2019 On-site Calibrator for Alternating-current Electric Energy Meter
  • T/SASE 007-2023 Safety valve calibration and maintenance service specification
  • T/CSES 12-2020 Technical guidelines for validation of sediment quality criteria
  • T/CSES 49-2022 Technical guidelines for verification of water quality criteria for the protection of human health
  • T/ZJASE 012-2021 Machinery manufacturing industry green factory evaluation guidelines
  • T/SMA 0010-2020 SF6 Gas Density Relay Field Calibration Regulations
  • T/CIMA 0035-2023
  • T/GDC 78-2020 Standard equipment for online monitoring and verification of GIS localization
  • T/SIA 037.3-2023 Industrial Software Container Image Verification Interface Specification
  • T/NXZX 002-2023 Direct load safety valve online calibration procedures
  • T/CSES 14-2020 Technical guidelines for in-situ evaluation of aquatic ecological criteria
  • T/SMA 0042-2023 On-site verification specification for intelligent pressure oil level monitor
  • T/CEC 126-2016 Calibration method of sulfur hexafluoride gas decomposition product detector
  • T/CSES 68-2022 Technical guidelines for verification of water quality criteria for freshwater organism protection
  • T/CSEE /Z0037-2017 Technical Guidelines for Remote Calibration and Monitoring System of Electric Energy Metering Devices
  • T/CEC 410-2020 Technical Specifications for SF6/N2 Mixed Gas Density Relay Calibration Device
  • T/CEC 671-2022 On-site verification method of online monitoring device for dissolved gas in transformer oil
  • T/CEC 568-2021 SF6/N2 mixed gas mixture ratio detector calibration and on-site detection method
  • T/CEC 672-2022 Specifications for On-site Calibrator of Dissolved Gas Online Monitoring Device in Transformer Oil

Guizhou Provincial Standard of the People's Republic of China, check

Professional Standard-Ships, check

Anhui Provincial Standard of the People's Republic of China, check

Guangdong Provincial Standard of the People's Republic of China, check

American Society of Mechanical Engineers (ASME), check

  • ASME B89/TR-1990 Parametric calibration of coordinate measuring machines
  • ASME B89 TECH REPT-1990 Parametric Calibration of Coordinate Measuring Machines Errata March 2002
  • ASME V V 10.1-2012 An Illustration of the Concepts of Verification and Validation in Computational Solid Mechanics
  • ASME V V 10-2019 An Illustration of the Concepts of Verification and Validation in Computational Solid Mechanics

Professional Standard - Electron, check

International Organization for Standardization (ISO), check

  • ISO 7064:1983 Data processing; Check character systems
  • ISO/TR 7066-1:1997 Assessment of uncertainty in calibration and use of flow measurement devices - Part 1: Linear calibration relationships
  • ISO 11605:1995 Paper and board - Calibration of variable-area flowmeters
  • ISO/IEC 7064:2003 Information technology - Security techniques - Check character systems
  • ISO 10191:2010 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
  • ISO 10191:1993 Passenger car tyres; verifying tyre capabilities; laboratory test methods
  • ISO 9513:1989 Metallic materials; verification of extensometers used in uniaxial testing
  • ISO/IEC 9594-8:1998 Information technology - Open Systems Interconnection - The Directory: Authentification framework
  • ISO 7700-1:1984 Check of the calibration of moisture meters; Part 1 : Moisture meters for cereals
  • ISO 7700-2:1987 Check of the calibration of moisture meters; Part 2 : Moisture meters for oilseeds
  • ISO/IEC 9594-8:1998/Cor 1:2000 Information technology - Open Systems Interconnection - The Directory: Authentication framework; Technical Corrigendum 1
  • ISO 1155:1973 Title missing - Legacy paper document
  • ISO 17657-4:2005 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system
  • ISO 1155:1978 Information processing - Use of longitudinal parity to detect errors in information messages
  • ISO 10647:1996 Procedures for calibrating and determining the response of neutron-measuring devices used for radiation protection purposes
  • ISO 5308:1992 Solid fertilizers; method of checking the performance of mechanical devices for sampling of product moving in bulk
  • ISO 22915-11:2011 Industrial trucks - Verification of stability - Part 11: Industrial variable-reach trucks
  • ISO 5347-20:1997 Methods for the calibration of vibration and shock pick-ups - Part 20: Primary vibration calibration by the reciprocity method

American National Standards Institute （ANSI), check

Professional Standard - Coal, check

CN-QIYE, check

国家市场监督管理总局、中国国家标准化管理委员会, check

API - American Petroleum Institute, check

IN-BIS, check

IETF - Internet Engineering Task Force, check

  • RFC 3961-2005 Encryption and Checksum Specifications for Kerberos 5
  • RFC 6935-2013 IPv6 and UDP Checksums for Tunneled Packets
  • RFC 4720-2006 Pseudowire Emulation Edge-to-Edge (PWE3) Frame Check Sequence Retention
  • RFC 5170-2008 Low Density Parity Check (LDPC) Staircase and Triangle Forward Error Correction (FEC) Schemes
  • RFC 6936-2013 Applicability Statement for the Use of IPv6 UDP Datagrams with Zero Checksums
  • RFC 6816-2012 Simple Low-Density Parity Check (LDPC) Staircase Forward Error Correction (FEC) Scheme for FECFRAME
  • RFC 6015-2010 RTP Payload Format for 1-D Interleaved Parity Forward Error Correction (FEC)

Inner Mongolia Provincial Standard of the People's Republic of China, check

Hebei Provincial Standard of the People's Republic of China, check

  • DB13/T 5177-2020 Specifications for online calibration of elevator speed limiter
  • DB13/T 1007-2009 In-use fuel injection pump test bench technical conditions and calibration
  • DB13/T 1442-2011 Inspection and Calibration Method of Crane Overspeed Protection Device

Hubei Provincial Standard of the People's Republic of China, check

  • DB42/T 1943-2022 Calibration specification for in-use elevator speed limiter
  • DB42/T 628-2010 Calibration specfication of multifunction calibrator for electric measuring instruments,transducters and AC sampling equipment
  • DB42/T 1381-2018 General technical requirements for calibrating device of high-voltage electric energy meter

Professional Standard - Electricity, check

  • DL/T 1258-2013 General technical requirement of instrument transformer error test sets
  • DL/T 1788-2017 Specification for on-site calibration of HVDC transformers
  • DL/T 1865-2018 Calibration procedures for trace total organic carbon analyzers
  • DL/T 2187-2020 General technical requirements for DC transformer calibrator
  • DL/T 259-2012 Calibration regulation for SF6 gas density monitor
  • DL/T 259-2023
  • DL/T 1394-2014 Technical requirement of electronic current and voltage transformer error test sets
  • DL/T 1825-2018 Static method for calibrating sulfur hexafluoride online humidity measuring device
  • DL/T 2185-2020 Technical conditions for power frequency voltage transformer on-site calibration complete set of equipment
  • DL/T 2186-2020 Technical conditions for power frequency current transformer on-site calibration complete set of equipment

Professional Standard - Geology, check

  • DZ 0023-1991 General technical requirements for inclinometer calibration bench

Jilin Provincial Standard of the People's Republic of China, check

  • DB22/T 3591-2023 Meteorological warning information file verification specifications

ZA-SANS, check

  • SANS 3453:1984 Non-destructive testing — Liquid penetrant inspection — Means of verification
  • SANS 10378:2005 General requirements for the competence of verification laboratories in terms of the Trade Metrology Act
  • SANS 6507-2:2006 Metallic materials - Vickers hardness test Part 2: Verification and calibration of testing machines
  • SANS 6506-3:2009 Metallic materials - Brinell hardness test Part 3: Calibration of reference blocks
  • SANS 10343:2003 Verification of non-automatic electronic self-indicating road vehicle mass measuring equipment for use by road traffic authorities

CH-SNV, check

American Society for Testing and Materials (ASTM), check

  • ASTM E2374-10 Standard Guide for Acoustic Emission System Performance Verification
  • ASTM E908-98(2012) Standard Practice for Calibrating Gaseous Reference Leaks
  • ASTM F1062-97(2003) Standard Test Method for Verification of Ski Binding Test Devices
  • ASTM F1062-97(2018) Standard Test Method for Verification of Ski Binding Test Devices
  • ASTM E2206-02 Standard Method for Force Calibration Of Thermomechnical Analyzers
  • ASTM F1062-97(2008) Standard Test Method for Verification of Ski Binding Test Devices
  • ASTM E824-94(2002) Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
  • ASTM E824-94 Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
  • ASTM E824-10(2018)e1 Transmission method for calibrating site pyradiometers from reference
  • ASTM D1389-97a Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
  • ASTM E824-10 Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
  • ASTM G207-11 Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
  • ASTM C1103-02 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

机械工业部, check

  • JB 6293-1992 Technical specifications of hand-operated oil injector calibrator
  • JB/T 7913-1995 Preparation and verification methods of steel comparison test blocks for ultrasonic testing

European Committee for Standardization (CEN), check

  • DD ENV 12 647-1997 Bar Coding - Test Specifications for Bar Code Verifiers
  • EN ISO 6508-3:1999 Metallic Materials - Rockwell Hardness Test - Part 3: Calibration of Reference Blocks (Scales A, B, C, D, E, F, G, H, K, N, T) ISO 6508-3: 1999
  • EN ISO 17657-4:2007 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system
  • EN 4057-407:2005 Aerospace series - Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings
  • PD CEN/TR 10345:2013 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
  • DD ENV 41208-2-1990 Information systems interconnection; basic class virtual terminal, S-mode forms; part 2: check list
  • EN ISO 6506-3:2014 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks
  • EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks
  • prEN 29302-1991 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness
  • prEN 2002-3-1978 Test methods for metallic materials; part 3: load calibration of tensile testing machines; aerospace series
  • DD ENV 41208-3-1990 Information systems interconnection; basic class virtual terminal, S-mode forms; part 3: underlying layers check list
  • EN 2591-207:1996 Aerospace series - Elements of electrical and optical connection - Test methods - Part 207: Voltage proof test

Korean Agency for Technology and Standards (KATS), check

  • KS X ISO/IEC 7064:2014 Information technology — Security techniques — Check character systems
  • KS X ISO/IEC 7064:2004 Information technology-Security techniques-Check character systems
  • KS M ISO 10191:2012 Passenger car tyres－Verifying tyre capabilities－Laboratory test methods
  • KS M ISO 10454:2007 Truck and bus tyres－Verifying tyre capabilities－Laboratory test methods
  • KS B ISO 17657-4:2005 Resistance welding－Welding current measurement for resistance welding－Part 4：Calibration system
  • KS X 3001-2008(2018) Information technology－Character structure on the transmission circuits and horizontal parity method
  • KS B ISO 7500-2:2004 Metallic materials-Verification of static uniaxial testing machines-Part 2:Tension creep testing machines-Verification of the applied load
  • KS B ISO 7500-2:2013 Metallic materials－Verification of static uniaxial testing machines－Part 2：Tension creep testing machines－Verification of the applied load
  • KS X ISO/IEC 1155-2007(2012) Information processing－Use of longitudinal parity to detect errors in information messages
  • KS B ISO TR 7066-1:2004 Assessment of uncertainty in calibration and use of flow measurement devices-Part 1:Linear calibration relationships
  • KS B ISO TR 7066-1:2015 Assessment of uncertainty in calibration and use of flow measurement devices－Part 1：Linear calibration relationships

Sichuan Provincial Standard of the People's Republic of China, check

  • DB51/T 2343-2017 Technical specifications for online calibration of spring-loaded safety valves

Liaoning Provincial Standard of the People's Republic of China, check

  • DB21/T 2104-2013 Calibration procedure for metal wire repeated bending test machine

Institute of Electrical and Electronics Engineers (IEEE), check

  • IEEE 1667-2006 Protocol for authentication in host attachments of transient storage devices
  • IEEE 1890-2018 IEEE Standard for Error Correction Coding of Flash Memory Using Low-Density Parity Check Codes
  • IEEE Std 1890-2018 IEEE Standard for Error Correction Coding of Flash Memory Using Low-Density Parity Check Codes

RU-GOST R, check

  • GOST 26626-1985 Control-cash and ticket-cash machines. General technical requirements

Shanxi Provincial Standard of the People's Republic of China, check

  • DB14/T 2134-2020 Operating Procedures for Elevator Speed Governor Action Speed Calibration

RO-ASRO, check

  • STAS 7802/2-1979 CALIBRATING BLOCKS FOR VERIFYING AND REGULATING OF FLAW DETECTORS Calibrating blocks type Al
  • STAS 7802/3-1979 CALIBRATING BLOCKS FOR VERIFYING AND REGULATING OF FLAW DETECTORS Calibrating blocks type A2
  • STAS 7802/4-1979 CALIBRATING BLOCKS FOR VERIF YIND AND REGULATING OF FLAW DETECTORS Calibrating blocks type A3
  • STAS 7802/5-1979 CALIBRAT IN G BLOCKS FOR GHECK1NG AND REGULATING OF FLAW DETECTORS Calibrating blocks type A4

SE-SIS, check

Professional Standard - Petroleum, check

  • SY/T 6406-1999 Maintenance and inspection for magnetic single - shot & multi - shot survey instruments
  • SY/T 5693-1995 Technical Regulations for Maintenance and Calibration of Carbon-Oxygen Ratio Spectrum Logging Tool

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, check

  • GB/T 33112-2016 Verification method of instruments devoted to geotechnical engineering prototype monitoring
  • GB/T 34363-2017 Non-destructive testing—Test method for fabricating and checking aluminum alloy ultrasonic standard reference blocks

Professional Standard - Energy, check

  • DL/T 2458-2021 General technical requirements for DC transformer transient calibrator

Yunnan Provincial Standard of the People's Republic of China, check

  • DB53/T 575-2014 Classification and assessment of the capability of safety valve calibration institutions

Military Standard of the People's Republic of China-General Armament Department, check

  • GJB 7296-2011 Parameters and algorithm of low density parity check code for military application
  • GJB 9350-2018 Technical requirements for low-density parity check coding for relay satellite systems

Underwriters Laboratories (UL), check

  • UL 2799-2012 Environmental Claim Validation Procedure for Zero Waste to Landfill

International Telecommunication Union (ITU), check

  • ITU-T X.509 CORR 4-2007 (Pre-Published) Information Technology - Open Systems Interconnection - The Directory: Authentication Framework - Data Networks and Open System Communications Directory Technical Corrigendum 4
  • ITU-T X.509 CORR 1-2007 Information technology ?Open Systems Interconnection ?The Directory: Public-key and attribute certificate frameworks Technical Corrigendum 1 Study Group 17

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, check

  • JEDEC JESD82-27-2007 Definition of the SSTUB32869 Registered Applications Buffer with Parity for DDR2 RDIMM
  • JEDEC JESD82-26-2007 Definition of the SSTUB32868 Registered Buffer with Parity for 2R x 4 DDR2 RDIMM Applications
  • JEDEC JESD82-23-2007 Definition of the SSTUA32S869 and SSTUA32D869 DDR2 RDIMM Applications Registered Buffer with Parity for
  • JEDEC JESD82-12A-2007 Definition of the SSTU32S869 and SSTU32D869 Registered Buffer with Parity for DDR2 RDIMM Applications
  • JEDEC JESD82-9B-2007 Definition of the SSTU32865 Registered Buffer with Parity for 2R ?4 DDR2 RDIMM Applications
  • JEDEC JESD82-14A-2006 Definition of the SSTUB32868 1.8 V Configurable Registered Buffer with Parity for DDR2 RDIMM Applications
  • JEDEC JESD82-24-2007 Definition of the SSTUB32865 for DDR2 RDIMM Applications 28-bit 1:2 Registered Buffer with Parity

Fujian Provincial Standard of the People's Republic of China, check

  • DB35/T 1688-2017 Safety technical specification for on-line calibration of safety valves for flammable and explosive media

CEN - European Committee for Standardization, check

  • EN ISO 6508-3:2005 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A@ B@ C@ D@ E@ F@ G@ H@ K@ N@ T)

Beijing Provincial Standard of the People's Republic of China, check

  • DB11/T 1468.2-2017 Specifications for Intelligent Metering Facilities for Agricultural Mechanized Wells Part 2: Field Calibration

European Association of Aerospace Industries, check

  • AECMA PREN 3745-501-1998 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 501: Optical Fibre Proof Test Edition P 1

工业和信息化部, check

  • YB/T 4997-2022 Rules for the use of calibration and quality control charts in spectrochemical analysis

Society of Motion Picture and Television Engineers (SMPTE), check

  • SMPTE RP 165-1994 Error Detection Checkwords and Status Flags for Use in Bit-Serial Digital Interfaces for Television

ETSI - European Telecommunications Standards Institute, check

  • TS 102 846-2010 User Group; Quality of ICT Services; Requirements for Bodies Providing Conformity Assessment of Checking-up on Metering and Billing Processes (V1.1.1)

  external calibration, checksum, check iso, Calibration tool, check, Calibration system, Instrument Calibration, Calibration system, Calibration + System, Calibration method, flight check, Device Calibration, Device Calibration, Entity check, calibration gas, Calibration procedures, Instrument Calibration, Self-check, Calibration factor, Data validation.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved