ZH
RU
ES

chemical standard deviation

chemical standard deviation, Total:301 items.

In the international standard classification, chemical standard deviation involves: Ferrous metals, Quality, Iron and steel products, Components for aerospace construction, Linear and angular measurements, Rubber and plastics products, Road engineering, Non-ferrous metals, Rubber, Tyres, Cutting tools, Optics and optical measurements, Testing of metals, Rotating machinery, Products of the textile industry, Paints and varnishes, Coals, Occupational safety. Industrial hygiene, Raw materials for rubber and plastics, Particle size analysis. Sieving, Vocabularies, Medical equipment, Test conditions and procedures in general, Shafts and couplings, Applications of information technology, Nuclear energy engineering, Wood, sawlogs and sawn timber, Products of non-ferrous metals, Lighting, Standardization. General rules, Analytical chemistry, Construction industry, Physics. Chemistry, Capacitors, Air quality, Organic chemicals, Education, Water quality, Construction materials, Fasteners for aerospace construction, Metrology and measurement in general, Protective equipment, Glass, Products of the chemical industry, Company organization and management, Pipeline components and pipelines, Coatings and related processes used in aerospace industry, Inorganic chemicals, Plastics.

Association Francaise de Normalisation, chemical standard deviation

NF T20-082:1976 Produits chimiques à usage industriel - Échantillonnage en vue de la détermination d'un titre moyen dans le cas ou l'écart-type de la dispersion de la grandeur mesurée est inconnu.
NF EN ISO 286-2:2010 Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 2 : tableaux des classes de tolérance normalisés et des écarts limites des alésages et des arbres
NF T20-081:1976 Produits chimiques à usage industriel - Échantillonnage en vue de la détermination d'un titre moyen dans le cas ou l'écart-type de la dispersion de la grandeur mesurée est connu.
CWA 15236:2005 Analysis of standardization requirements and standardization gaps for eProcurement in Europe
NF E02-100-2:1993 Iso system of limites and fits. Part 2 : tables of standard tolerance grades and limit deviations for holes and shafts.
NF P21-351:1995 Structural timber. Coniferous and poplar. Sizes, permissible deviations.
NF X06-025*NF ISO 39511:2018 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
NF L24-138*NF EN 3543:1997 Aerospace series. Screws, 100 degrees countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification : 1100 MPa (at ambient temperature) / 425 degrees Celsius
NF T01-002:1980 Chemical industry. Layout for a standard method of chemical analysis.
NF E02-100-2*NF EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts.
NF T01-005:1969 Chemical industries. Standard layout for methods of chemical analysis by gas chromatography.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, chemical standard deviation

GB/T 222-2006 Permissible tolerances for chemical composition of steel products
GB 1800-1979 Tolerance and fitting,generalities,standard tolerances and basic deviations
GB/T 25829-2010 Permissible variations for chemical composition of superalloy products
GB/T 17531-1998 Rubber and rubber products--Determination of accuracy and bias of chemical test methods
GB/T 222-1984 Method of sampling steel for determination of chemical composition and permissible variations for product analysis
GB/T 3620.2-2023 Allowable Deviation of Chemical Composition of Titanium and Titanium Alloy Processed Products
GB/T 3620.2-2007 Titanium and titanium alloys permissible variations of chemical composition for wrought product analysis
GB/T 3620.2-1994 Titanium and titanium alloys-permissible variations of chemical composition for wrought product analysis
GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 1800.3-1998 Limits and fits--Bases--Part 3: Numerical values tables of standard toleranes and fundamental deviations
GB/T 1800.2-2009 Geometrical Product Specifications (GPS) Limits and fits--Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 7917.2-1987 Standard methods of hygienic test for cosmetics--Arsenic
GB/T 7917.3-1987 Standard methods for hygienic test for cosmetics--Lead
GB 7917.2-1987 Standard test method for hygienic chemistry of cosmetics Arsenic
GB 7917.3-1987 Cosmetics hygienic chemical standard test method for lead
GB 7917.1-1987 Hygienic Chemical Standard Test Method for Cosmetics Mercury

Japanese Industrial Standards Committee (JISC), chemical standard deviation

JIS Z 9042:1962 Significance test of difference between the population mean and the standard (standard deviation known, one-sided)
JIS Z 9043:1962 Significance test of difference between the population mean and the standard (standard deviation known, two-sided)
JIS Z 9044:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, one-sided)
JIS Z 9045:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, two-sided)
JIS Z 9046:1965 Significance test of difference between the two population means (standard deviations known, one-sided)
JIS Z 9047:1979 Significance test of difference between the two population means (standard deviations known, two-sided)
JIS Z 9048:1979 Significance test of difference between the two population means (standard deviations unknown, one-sided)
JIS Z 9049:1965 Significance test of difference between the two population means (standard deviations unknown, two-sided)
JIS Z 9052:1963 Interval estimation of the difference between two population means (standard deviations known)
JIS Z 9053:1963 Interval estimation of the difference between two population means (standard deviations unknown)
JIS Z 9050:1963 Interval estimation of the population mean (standard deviation known)
JIS Z 9051:1963 Interval estimation of the population mean (standard deviation unknown)
JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
JIS Z 9010:1979 Sequential sampling inspection plans for percent defectives having desired operating characteristics by variables (standard deviation known)
JIS Z 9010:1999 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
JIS B 0401-2 ERRATUM 1:2002 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts (Erratum 1)
JIS K 0501:1974 General rule for chemical standard materials
JIS B 0401-2:2016 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
JIS Z 9003:1979 Single sampling inspection plans having desired operation characteristics by variables (standard deviation known)

Professional Standard - Agriculture, chemical standard deviation

GB/T 1800-1979 General Tolerance and Fit Standard Tolerance and Basic Deviation
GB/T 1.4-1988 Standardization Work Guidelines Chemical Analysis Method Standard Compilation Provisions

American Society for Testing and Materials (ASTM), chemical standard deviation

ASTM F801-96 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F801-96(2002) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F801-16 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F801-21 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D4695-03(2015) Standard Guide for General Pavement Deflection Measurements
ASTM D4695-03(2020) Standard Guide for General Pavement Deflection Measurements
ASTM F801-96(2008) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F2469-10 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F2469-05 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F733-09(2014) Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F2469-15 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D2906-97 Standard Practice for Statements on Precision and Bias for Textiles
ASTM D2906-97(2002) Standard Practice for Statements on Precision and Bias for Textiles
ASTM F733-90(2003) Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F733-90(1997)e1 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F733-09 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F733-19 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D3134-97(2003) Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3134-97 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3134-97(2008)e1 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3134-15 Standard Practice for Establishing Color and Gloss Tolerances
ASTM F2469-20 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D6518-02 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D6518-03 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D6518-02a Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D3670-91(2001) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D6518-06e1 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D6518-06 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D4821-14 Standard Guide for Carbon Blackmdash;Validation of Test Method Precision and Bias
ASTM D4821-05 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-99 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-01a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D3670-91(2022) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D4821-15 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-16 Standard Guide for Carbon Black&x2014;Validation of Test Method Precision and Bias
ASTM D3670-91(2014) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM E2578-07(2018) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2022) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM D3670-91(1996)e1 Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D3670-91(2007) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D4821-06 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-07 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-04 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-01 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-03 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-03a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-19 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-20 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-07e1 Standard Guide for Carbon BlackValidation of Test Method Precision and Bias
ASTM D6617-00 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM E2578-07 Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM D6617-05 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-08 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D6617-17 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-21 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM E177-90a(1996) Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-04 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-06 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-04e1 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-19 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-20 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E177-10 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM C1215-92(1997) Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM C1215-18 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM D7915-18 Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set
ASTM D7915-22 Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set
ASTM E177-13 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM B754-17 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
ASTM E2168-06 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
ASTM E2168-01 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
ASTM B754-10 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
ASTM B754-22 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
ASTM D6617-13 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM E537-20 Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry
ASTM D6941-04 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
ASTM D6941-19 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
ASTM E537-07 Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
ASTM E537-02 Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
ASTM E537-12 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry
ASTM D7911-19 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
ASTM D7911-14 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
ASTM D2777-03 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
ASTM C670-03 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C670-10 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM D2777-21 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM C670-13 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C670-15 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM D7729-12 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
ASTM F1301-17 Standard Practice for Labeling Chemical Protective Clothing
ASTM F1301-90(2011)e1 Standard Practice for Labeling Chemical Protective Clothing
ASTM F1301-18 Standard Practice for Labeling Chemical Protective Clothing
ASTM C1422/C1422M-10 Standard Specification for Chemically Strengthened Flat Glass
ASTM C670-96 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM D2777-06 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D2777-08e1 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM C287-98(2003) Standard Specification for Chemical-Resistant Sulfur Mortar
ASTM C1422-99 Standard Specification for Chemically Strengthened Flat Glass
ASTM C287-98 Standard Specification for Chemical-Resistant Sulfur Mortar
ASTM C1422-99(2005) Standard Specification for Chemically Strengthened Flat Glass
ASTM C1422/C1422M-20 Standard Specification for Chemically Strengthened Flat Glass
ASTM C1422/C1422M-20a Standard Specification for Chemically Strengthened Flat Glass
ASTM D7729-12(2018)e1 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
ASTM E1102-91(1996)e1 Standard Terminology Relating to Agricultural Chemical Application
ASTM C279-17 Standard Specification for Chemical-Resistant Masonry Units
ASTM C791-04 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
ASTM C791-11 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
ASTM D3681-23 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
ASTM D2777-13 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM C761-18 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
ASTM C287-98(2008)e1 Standard Specification for Chemical-Resistant Sulfur Mortar
ASTM E534-08 Standard Test Methods for Chemical Analysis of Sodium Chloride
ASTM C287-98(2012) Standard Specification for Chemical-Resistant Sulfur Mortar
ASTM E534-18 Standard Test Methods for Chemical Analysis of Sodium Chloride
ASTM E534-13 Standard Test Methods for Chemical Analysis of Sodium Chloride
ASTM E200-16 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
ASTM D5575-99(2003) Standard Specification for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
ASTM D5575-99 Standard Specification for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers

German Institute for Standardization, chemical standard deviation

DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN EN ISO 286-2:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013

Korean Agency for Technology and Standards (KATS), chemical standard deviation

KS A 3254-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3254-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3255-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3255-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3252-1968(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS A 3253-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, TWO-SIDED)
KS B 0507-1975(2011) Roughness Comparison Specimens
KS A 3262-1969(2001) INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS Q 0001-2010 Single sampling inspection plans by variables having desired operating characteristics(known standard deviation)
KS Q 0001-2013 Single sampling inspection plans by variables and attributes
KS A 3263-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEIVATIONS UNKNOWN)
KS A 3259-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
KS A 3260-1969(2001) INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATION KNOWN)
KS A 3258-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN, ONE-SIDED)
KS A 3256-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS KNOWN, ONE-SIDED)
KS A 3257-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS KNOWN, TWO-SIDED)
KS Q 1001-2005(2011) Single sampling inspection plums having desired operationcharacteristics by variables(Standard deviation known)
KS B ISO 286-2:2009 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2014 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2015 Geometrical product specifications(GPS) — ISO code system fortolerances on linear sizes — Part 2: Tables of standard toleranceclasses and limit deviations for holes and shafts
KS B ISO 286-2:2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
KS M 0121-2009 General rule for chemical standard materials
KS M 0121-1989 General rule for chemical standard materials
KS M ISO 78-2:2011 Chemistry-Layouts for standards-Part 2:Method of chemical analysis
KS M ISO 78-2:2016 Chemistry－Layouts for standards－Part 2：Method of chemical analysis
KS M ISO 78-2-2016(2021) Chemistry－Layouts for standards－Part 2：Method of chemical analysis
KS M 0121-2009(2019) General rule for chemical standard materials

IN-BIS, chemical standard deviation

IS 6601-1972

International Organization for Standardization (ISO), chemical standard deviation

ISO/TR 9474:1993 Rubber and rubber products; determination of accuracy and bias of chemical test methods
ISO 8366:1987 Coated abrasive products; Dimensional tolerances on non-standard conversions
ISO 286-2:1988 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts
ISO 286-2:1988/Cor 1:2006 ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts; Technical Corrigendum 1
ISO 78-2:1999 Chemistry - Layouts for standards - Part 2: Methods of chemical analysis
ISO/R 78:1969 Guide on the form for standards for chemical products and for methods of chemical analysis
ISO 78-2:1982 Layouts for standards; Part 2 : Standard for chemical analysis
ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

IT-UNI, chemical standard deviation

Society of Automotive Engineers (SAE), chemical standard deviation

SAE AS4833-1995 Aircraft New Tire Standard - Bias and Radial
SAE J409-1995 Product Analysis Permissible Variations from Specified chemical analysis of a Heat or Cast of Steel
SAE J409-2021 Product Analysis - Permissible Variations from Specified Chemical Analysis of a Heat or Cast of Steel

Military Standard of the People's Republic of China-General Armament Department, chemical standard deviation

GJB 8604-2015 Allowable deviations in chemical composition of finished high-temperature alloys for aerospace applications

NL-NEN, chemical standard deviation

NEN 2890-1990 Derivation of target sizes from modular sizes of building elements
NEN-ISO 286-2:1989 ISO-passingstelsel. Deel 2: Tabellen met standaardtolerantiekwaliteiten en grensmaatafwijkingen voor gaten en assen

Professional Standard - Machinery, chemical standard deviation

JB/T 8995.1-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines.General standard tolerances and fundamental deviations

GOSTR, chemical standard deviation

GOST 7329-1991 Chemical laboratory and electrovacuum glassware. Polarizable and optical method of path-length difference measuring
GOST ISO 1328-1-2017 Cylindrical gears. ISO system. Flank tolerance classification. Part 1. Definitions and allowable values of deviations relevant to flanks of gear teeth

Standard Association of Australia （SAA）, chemical standard deviation

AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

VN-TCVN, chemical standard deviation

TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts
TCVN 6900-2-2001 Chemistry.Layouts for standards.Part 2: Methods of mechical analysis

AT-ON, chemical standard deviation

ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts
ONORM EN 20286-2-1993 ISO System of limits and fits - Part 2: Tables of Standard tolerance grades and limit deviations for holes and shafts (ISO 286-2:1988)

SAE - SAE International, chemical standard deviation

SAE J409-1990 Product Analysis - Permissible Variations from Specified Chemical Analysis of a Heat or Cast of Steel
SAE J409-1984 Product Analysis - Permissible Variations from Specified Chemical Analysis of a Heat or Cast of Steel
SAE AS7108A-1998 NADCAP Audit Criteria for Chemical Processing
SAE AS7108C-2009 NADCAP Audit Criteria for Chemical Processing

CZ-CSN, chemical standard deviation

American National Standards Institute （ANSI), chemical standard deviation

ANSI/ASTM/ISO 4135:2009 Anaesthetic and Respiratory Equipment - Vocabulary with Deviations by ASTM International
ANSI/ASTM D6617:2021 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ANSI/ASTM/ISO 5360:2009 Anesthetic Vaporizes - Agent-Specific Filling Systems with Deviations by ASTM International
ANSI Z80.20-2004 Ophthalmics: Contact Lenses - Standard Terminology, Tolerances, Measurements and Physicochemical Properties
ANSI Z80.20-2010 Contact Lenses - Standard Terminology, Tolerances Measurements and Physiochemical Properties
ANSI/ASTM D6617:2013 Practice For Laboratory Bias Detection Using Single Test Result from Standard Material
ANSI/ASTM D4968:2000 Guide to Using the Flow Chart for Annual Review of Standards Including the Model Precision and Bias Statement for Plastics (08.03)
ANSI/UL 810-2012 Standard for Capacitors
ANSI/UL 810A-2012 Standard for Electrochemical Capacitors
ANSI/ASTM/ISO 11195:2009 Gas Mixers for Medical Use - Stand-alone Gas Mixers with Deviations by ASTM international

GB-REG, chemical standard deviation

REG NASA-LLIS-1758--2006 Lessons Learned ?Communicate Departures From Standard Operating Conditions (Video Lesson)

Danish Standards Foundation, chemical standard deviation

DS/EN 20286-2:1993 ISO system of limits and fits. Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
DS/ISO 8423:1992 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
DS/ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
DS/EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/EN ISO 286-2/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/ISO 78-2:2004 Chemistry - Layouts for standards - Part 2: Methods of chemical analysis
DS/EN 3543:1997 Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425°C

CU-NC, chemical standard deviation

NC 90-16-02-1989 Standards System for Metrological Assurance. Wow,Flutter and Drift Meters. Methods and Means of Verification

ZA-SANS, chemical standard deviation

SANS 286-2:1988 ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

未注明发布机构, chemical standard deviation

BS EN 20286-2:1993(2002) ISO system of limits and fits — Part 2 : Tables of standard tolerance grades and limit deviations for holes and shafts
BS EN ISO 286-2:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts
BS ISO 78-2:1999(2000) Chemistry — Layout for standards — Part 2 : Methods of chemical analysis

PT-IPQ, chemical standard deviation

NP 104-2-1988 Chemistry Layouts for standards Part 2: Standard for chemical analysis
NP 104-1957

ANSI - American National Standards Institute, chemical standard deviation

Z80.20-2016 For Ophthalmics Contact Lenses – Standard Terminology@ Tolerances@ Measurements and Physicochemical Properties (VC)
Z80.20-2010 For Ophthalmics Contact Lenses – Standard Terminology@ Tolerances@ Measurements and Physicochemical Properties (VC)
Z80.20-1998 Ophthalmics-Contact Lenses-Standard Terminology@ Tolerances@ Measurements and Physicochemical Properties (VC)

European Committee for Standardization (CEN), chemical standard deviation

CWA 15236-2005 Analysis of standardization requirements and standardization gaps for eProcurement in Europe
EN 20286-2:1993 ISO System of Limits and Fits - Part 2: Tables of Standard Tolerance Grades and Limit Deviations for Holes and Shafts ISO 286-2 : 1988
EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

British Standards Institution (BSI), chemical standard deviation

BS EN ISO 286-2:1990 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
BS ISO 78-2:1999 Chemistry - Layout for standards - Methods of chemical analysis
BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS 5702-1:2001 Guide to statistical process control (SPC) charts for variables - Charts for mean, median, range and standard deviation
BS ISO 39511:2018 Tracked Changes. Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)

BE-NBN, chemical standard deviation

NBN T 01-102-1984 Layouts for standards - Standard for chemical analysis

RU-GOST R, chemical standard deviation

GOST R 50779.53-1998 Statistical methods. Acceptance sampling by variables for normal distribution. Part 1. Known standard deviation
GOST R ISO 8423-2011 Statistical methods. Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)

KR-KS, chemical standard deviation

KS B ISO 286-2-2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
KS M ISO 78-2-2016 Chemistry－Layouts for standards－Part 2：Method of chemical analysis

国家市场监督管理总局、中国国家标准化管理委员会, chemical standard deviation

GB/T 1800.2-2020 Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

RO-ASRO, chemical standard deviation

STAS 9490-1987 Acoustics NORMALIZED FREQUENCIES FOR ACOUSTICAL MEASUREMENTS

Professional Standard - Education, chemical standard deviation

JY/T 0620-2019 Junior high school chemistry teaching equipment configuration standard

Lithuanian Standards Office , chemical standard deviation

LST ISO 78-2:2001 Chemistry. Layouts for standards. Part 2: Methods of chemical analysis
LST EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
LST EN 3543-2001 Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425°C

AENOR, chemical standard deviation

UNE-ISO 78-2:2014 Chemistry -- Layouts for standards -- Part 2: Methods of chemical analysis
UNE-EN ISO 286-2:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

(U.S.) Parachute Industry Association, chemical standard deviation

PIA-TS-114-1992 Student Equipment Standardization Guidelines

HU-MSZT, chemical standard deviation

CN-STDBOOK, chemical standard deviation

图书 3-8713 Academic Guide to Drawing Standards Series

Group Standards of the People's Republic of China, chemical standard deviation

T/NBEA 002-2019 Acid Standards for Aluminum Chemical Polishing
T/CCPS 0001-2023 Yi-ology Cultural Proficiency Test Standard

Shanghai Provincial Standard of the People's Republic of China, chemical standard deviation

DB31/T 137-3-1994 Chlorine Standard Solution for Clinical Chemistry
DB31/T 137-4-1994 Calcium Standard Solution for Clinical Chemistry
DB31/T 137-5-1994 Phosphorus standard solution for clinical chemistry

ES-UNE, chemical standard deviation

UNE-EN ISO 286-2:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)

YU-JUS, chemical standard deviation

JUS H.G0.001-1987 Reagents. Preparation, standard iza ti on and storage of standard volumetric solutions for chemical analysis

PL-PKN, chemical standard deviation

PN BN 7312-02-1964 Standard paper sulphi?e chemical pulp unbleached

中华人民共和国国家卫生和计划生育委员会, chemical standard deviation

GB/T 7917.1-1987 Standard methods of hygienic test for cosmetics--Mercury