ZH
RU
ES
sampling system
sampling system, Total:60 items.
In the international standard classification, sampling system involves: Air quality, Internal combustion engines for road vehicles, Nuclear energy engineering, Coals, Fuels, Installations in buildings, Quality, Equipment for petroleum and natural gas industries, Petroleum, petroleum products and natural gas handling equipment.
Standard Association of Australia （SAA）, sampling system
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, sampling system
- GB/T 2007.5-1987 General rules for the sampling and sample preparation of minerals in bulk--Experimental method for checking the bias of sampling
Society of Automotive Engineers (SAE), sampling system
- SAE J1094-2011 Constant Volume Sampler System for Exhaust Emissions measurement
- SAE J1094-1992 Constant Volume Sampler System for Exhaust Emissions Measurement, Information Report June 1992
TR-TSE, sampling system
- TS 2829-1977 IRON ORES - EXPERIMENTAL METHODS FOR CHECKING THE BIAS OP SAMPLING
Professional Standard - Energy, sampling system
- NB/T 20178-2012 Design criteria of nuclear sampling system of pressurized water reactor nuclear power plant
- NB/T 20266-2014 Specification for design of condensate polishing, chemical reagents injection and secondary sampling system for PWR nuclear power plants
GOSTR, sampling system
- GOST ISO 21398-2016 Hard coal and coke. Guidance to the inspection of mechanical sampling systems
International Organization for Standardization (ISO), sampling system
- ISO 21398:2019 Hard coal and coke — Guidance to the inspection of mechanical sampling systems
- ISO 21398:2007 Hard coal and coke - Guidance to the inspection of mechanical sampling systems
- ISO 18414:2006 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
- ISO 28593:2017 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
- ISO/TR 8550-1:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 1: Acceptance sampling
- ISO/TR 8550-3:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 3: Sampling by variables
- ISO/TR 8550-2:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 2: Sampling by attributes
British Standards Institution (BSI), sampling system
- BS ISO 21398:2019 Hard coal and coke. Guidance to the inspection of mechanical sampling systems
- BS ISO 21398:2007 Hard coal and coke - Guidance to the inspection of mechanical sampling systems
- BS ISO 21247:2005 Combined accept-zero sampling systems and process control procedures for product acceptance
- BS ISO 28594:2017 Tracked Changes. Combined accept-zero sampling systems and process control procedures for product acceptance
- BS EN 12838:2000 Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems
- BS ISO 28593:2017 Acceptance sampling procedures by attributes. Accept-zero sampling system based on credit principle for controlling outgoing quality
- BS 6000-2:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Guide to sampling by attributes
- BS 6000-3:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Guide to sampling by variables
- BS 6000-1:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots - General guide to acceptance sampling
American Society for Testing and Materials (ASTM), sampling system
- ASTM D4702-03a Standard Guide for Quality Management of Mechanical Coal Sampling Systems
- ASTM D4702-04 Standard Guide for Quality Management of Mechanical Coal Sampling Systems
- ASTM D4702-06 Standard Practice for Quality Management of Mechanical Coal Sampling Systems
- ASTM D6518-02 Standard Practice for Bias Testing a Mechanical Coal Sampling System
- ASTM D6518-03 Standard Practice for Bias Testing a Mechanical Coal Sampling System
- ASTM D6518-02a Standard Practice for Bias Testing a Mechanical Coal Sampling System
- ASTM D6518-01 Standard Practice for Bias Testing a Mechanical Coal Sampling System
- ASTM D6518-00 Standard Practice for Bias Testing a Mechanical Coal Sampling System
- ASTM D6518-06e1 Standard Practice for Bias Testing a Mechanical Coal Sampling System
- ASTM D6518-06 Standard Practice for Bias Testing a Mechanical Coal Sampling System
- ASTM D4702-07 Standard Practice for Quality Management of Mechanical Coal Sampling Systems
- ASTM D4702-03 Standard Guide for Inspecting Crosscut, Sweep-Arm, and Auger Mechanical Coal-Sampling Systems for Conformance with Current ASTM Standards
- ASTM D4702-97(2003) Standard Guide for Inspecting Crosscut, Sweep-Arm, and Auger Mechanical Coal-Sampling Systems for Conformance with Current ASTM Standards
ZA-SANS, sampling system
- SANS 21398:2007 Hard coal and coke - Guidance to the inspection of mechanical sampling systems
Association Francaise de Normalisation, sampling system
- NF M51-008*NF EN 12838:2000 Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems.
- NF X06-120*NF ISO 28594:2017 Combined accept-zero sampling systems and process control procedures for product acceptance
- NF EN 12838:2000 Installations et équipements relatifs au gaz naturel liquéfié - Essais d'aptitude à l'emploi des systèmes d'échantillonnage du GNL
- XP X43-047-1*XP CEN/TS 16115-1:2011 Ambient air quality - Measurement of bioaerosols - Part 1 : determination of moulds using filter sampling systems and culture-based analyses
Danish Standards Foundation, sampling system
- DS/ISO 21247:2005 Combined accept-zero sampling systems and process control procedures for product acceptance
- DS/EN 12838:2000 Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems
- DS/CEN/TS 16115-1:2011 Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses
Lithuanian Standards Office , sampling system
- LST EN 12838-2001 Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems
American National Standards Institute （ANSI), sampling system
- ANSI/ISO 21247:2007 Combined accept-zero sampling systems and process control procedures for product acceptance
AENOR, sampling system
- UNE-EN 12838:2001 Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems.
- UNE-CEN/TS 16115-1:2013 Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses
German Institute for Standardization, sampling system
- DIN EN 12838:2000-07 Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems; German version EN 12838:2000
- DIN ISO 18414:2012 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality (ISO 18414:2006); Text in German and English
Korean Agency for Technology and Standards (KATS), sampling system
- KS A ISO 18414:2008 Acceptance sampling procedures by attributes-Accept-zero sampling system based on credit principle for controlling outgoing quality
- KS A ISO 18414:2015 Acceptance sampling procedures by attributes－Accept-zero sampling system based on credit principle for controlling outgoing quality
- KS Q ISO 8550-1-2012(2017) Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 1：Acceptance sampling
- KS Q ISO 8550-1-2012(2022) Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 1：Acceptance sampling
- KS Q ISO 8550-2:2012 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots-Part 2:Sampling by attributes
- KS Q ISO 8550-1:2012 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 1：Acceptance sampling
- KS Q ISO 8550-3:2012 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 3：Sampling by variables
US-CFR-file, sampling system
- CFR 40-1065.145-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.145:Gaseous and PM probes, transfer lines, and sampling system components.