ZH
RU
ES

A better length gauge

A better length gauge, Total:184 items.

In the international standard classification, A better length gauge involves: Radiation measurements, Fibre optic communications, Vibration and shock with respect to human beings, Optics and optical measurements, Special measuring equipment for use in telecommunications, Metrology and measurement in general, Linear and angular measurements, Cinematography, Textile fibres, Plastics, Materials for the reinforcement of composites, Construction materials, Quality, Products of the textile industry, Bearings, Electricity. Magnetism. Electrical and magnetic measurements, Metalliferous minerals, Photography, Electrical wires and cables, Petroleum products in general, Radiation protection, Cereals, pulses and derived products, Paper and board, Fertilizers, Rubber, Fuels, Measurement of fluid flow, Graphical symbols, Cork and cork products, Nuclear energy engineering, Pulps, Thermodynamics and temperature measurements, Plant and equipment for the food industry, Railway rolling stock, Testing of metals, Glass, Tobacco, tobacco products and related equipment, Raw materials for rubber and plastics, Air quality, Alarm and warning systems, Sterilization and disinfection.

Korean Agency for Technology and Standards (KATS), A better length gauge

KS A IEC 61098-2003(2018)
KS K ISO 2646:2012 Wool-Measurement of the length of fibres processed on the worsted system, using a fibre diagram machine
KS B 8400-1-2010 Lasers and laser-related equipments-Test methods for laser interferometers for displacement measurement-Part 1:Test methods for the frequency stability of frequency-stabilized continuous wave lasers
KS B 8400-1-2015 Lasers and laser-related equipments — Test methods for laser interferometers for displacement measurement — Part 1: Test methods for the frequency stability of frequency-stabilized continuous wave lasers
KS K ISO 2062:2012 Textiles-Yarns from packages-Determination of single-end breaking force and elongation at break using constant rate of extension(CRE) tester

German Institute for Standardization, A better length gauge

DIN 7917:2023-11 Benches for dressing room sports venue - Requirements, testing / Note: Date of issue 2023-10-06*Intended as replacement for DIN 7917 (2020-10).
DIN EN 62129-2:2012-03 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011); German version EN 62129-2:2011
DIN 2271-2:1976 Pneumatic Length Measurement (Air Gauging); Design Features of Instruments Working in the High Pressure Range
DIN EN 62129-2:2012 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011); German version EN 62129-2:2011
DIN EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers (IEC 62129-1:2016); German version EN 62129-1:2016
DIN 2271:2016 Geometrical product specifications (GPS) - Pneumatic length measurement - Characteristics of instruments, requirements, testing
DIN 2271-3:2000 Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing
DIN EN 16087-2:2012 Soil improvers and growing media - Determination of the aerobic biological activity - Part 2: Self heating test for compost; German version EN 16087-2:2011
DIN 2250-1:1989 General-purpose GO ring gauges and setting ring gauges for pneumatic length measuring instruments from 1 mm up to 315 mm nominal diameter
DIN EN 16842-7:2017 Powered industrial trucks - Visibility - Test method for verification - Part 7: Variable reach and masted container trucks handling freight containers of 6 m length and longer; German and English version prEN 16842-7:2017
DIN VDE 0119-207-14:2005 State of the railway vehicles - Control and instrumentation technology - Part 207-14: Procedure for changing the software on approved vehicles
DIN EN 16842-7:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 7: Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length and longer

Association Francaise de Normalisation, A better length gauge

NF EN ISO 22665:2013 Optique et instruments ophtalmiques - Appareil pour le mesurage de la longueur axiale de l'oeil
NF C93-846-1*NF EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1 : optical spectrum analyzers
NF E11-015:1991 Length measuring instruments. Standard reference measuring rods with spherical ends.
NF E11-099:2021 Length measuring instruments - Internal micrometers with 3 spindles - Specifications - Test methods
NF EN 50130-5:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
NF EN 302998-1:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
NF EN 62129-2:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
NF DTU 40.37:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
NF E11-200:1986 Length measuring instruments in use. Maintenance and downgrading. General rules.
NF EN ISO 2062:2010 Textiles - Fils sur enroulements - Détermination de la force de rupture et de l'allongement à la rupture des fils individuels à l'aide d'un appareil d'essai à vitesse constante d'allongement
NF EN 62129-1:2016 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 1 : analyseurs de spectre optique
NF E11-099:1993 Length measuring instruments. Internal micrometers with 3 spindles. Specifications. Test methods.
NF C93-846-13*NF EN IEC 62129-3:2019 Calibration of wavelength/optical frequency measurement instruments - Part 3 : optical frequency meters internally referenced to a frequency comb
NF E11-095:1993 Length measuring instruments. External micrometer reading in 0,01 mm and 0.001 mm. Specifications. Test methods.
NF E11-050:1990 Length measuring instruments. Mechanical dial gauges with radial retractable stem. Specifications and test methods.
NF E11-057:2011 Geometrical product specification (GPS) - Length measuring instruments - Reception and verification of mechanical dial gauges with radial retractable stem.
NF E11-018:1996 Geometrical product specification (gps). Length measuring instruments. Calibraiton specimens for thread measurement. Plugs and rings with groove.
NF H96-312-7*NF EN 16842-7:2018 Powered industrial trucks - Visibility - Test method and verification - Part 7 : variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length and longer
NF E11-057:2016 Geometrical product specification (GPS) - Length measuring instruments - Reception and verification of mechanical dial gauges with radial retractable stem

American National Standards Institute （ANSI), A better length gauge

BS EN IEC 61744:2023 Tracked Changes. Calibration of fibre optic chromatic dispersion test sets
ANSI/TAPPI T271 om-2012 Fiber length of pulp and paper by automated optical analyzer using polarized light

British Standards Institution (BSI), A better length gauge

BS EN ISO 8325:2023 Tracked Changes. Dentistry. Test methods for rotary instruments
BS EN ISO 8041-1:2017 Tracked Changes. Human response to vibration. Measuring instrumentation. General purpose vibration meters
BS ISO 16331-1:2017 Tracked Changes. Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters
BS ISO 5025:2017 Tracked Changes. Reinforcement products. Woven fabrics. Determination of width and length
BS 4044:1989 Methods for determination of fibre length by comb sorter diagram
BS ISO 1888:2022 Tracked Changes. Textile glass. Staple fibres or filaments. Determination of average diameter
BS EN ISO 29465:2022 Tracked Changes. Thermal insulating products for building applications. Determination of length and width
BS ISO 11843-7:2018 Tracked Changes. Capability of detection. Methodology based on stochastic properties of instrumental noise
BS ISO 3548-3:2023 Tracked Changes. Plain bearings. Thin-walled half bearings with or without flange. Determination of the peripheral length
BS EN ISO 13468-1:2019 Tracked Changes. Plastics. Determination of the total luminous transmittance of transparent materials. Single-beam instrument
BS EN 14624:2020 Tracked Changes. Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
BS EN 62586-1:2017 Tracked Changes. Power quality measurement in power supply systems. Power quality instruments (PQI)
BS PD ISO/TR 18231:2016 Iron ores. Wavelength dispersive X-ray fluorescence spectrometers. Determination of precision
BS EN ISO 1421:2016 Tracked Changes. Rubber- or plastics-coated fabrics. Determination of tensile strength and elongation at break
BS EN 60885-3:2015 Tracked Changes. Electrical test methods for electric cables. Test methods for partial discharge measurements on lengths of extruded power cables
BS EN ISO 2286-1:2016 Tracked Changes. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of length, width and net mass
BS EN 16087-1:2020 Tracked Changes. Soil improvers and growing media. Determination of the aerobic biological activity. Oxygen uptake rate (OUR)
BS PD IEC/TS 62129-3:2014 Calibration of wavelength/optical frequency measurement instruments. Optical frequency meters using optical frequency combs
BS EN IEC 62484:2021 Tracked Changes. Radiation protection instrumentation. Spectrometric radiation portal monitors (SRPMs) used for the detection and identification of illicit trafficking of radioactive material
BS 4317-21:1999 Methods of test for cereals and pulses - Determination of rheological properties of doughs using an extensograph
PD ISO/TR 3313:2018 Tracked Changes. Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
BS EN 15238:2022 Tracked Changes. Soil improvers and growing media. Determination of quantity for materials with particle size greater than 60 mm
BS ISO 11443:2021 Tracked Changes. Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
BS ISO 9370:2017 Tracked Changes. Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
BS EN IEC 62387:2022 Tracked Changes. Radiation protection instrumentation. Dosimetry systems with integrating passive detectors for individual, workplace and environmental monitoring of photon and beta radiation
BS EN ISO 10360-10:2021 Tracked Changes. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). Laser trackers
BS ISO 6721-10:2015 Tracked Changes. Plastics. Determination of dynamic mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer
BS EN ISO 20884:2011 Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry
BS ISO 17089-1:2019 Tracked Changes. Measurement of fluid flow in closed conduits. Ultrasonic meters for gas. Meters for custody transfer and allocation measurement
BS EN IEC 62244:2021 Tracked Changes. Radiation protection instrumentation. Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials
BS EN IEC 61265:2018 Tracked Changes. Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
BS EN 16416:2023 Tracked Changes. Geosynthetic clay barriers. Determination of water flux index. Flexible wall permeameter method at constant head
BS ISO 2386:2019 Tracked Changes. Packed cork. Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste. Determination of moisture content
BS EN ISO 4671:2022 Tracked Changes. Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
BS ISO 2285:2019 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
BS IEC/IEEE 62582-3:2013 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Elongation at break
BS EN 12830:2018 Tracked Changes. Temperature recorders for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
PD CEN/TR 12471:2022 Tracked Changes. Screening test for the presence of nickel in articles which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
BS IEC 60951-1:2022 Tracked Changes. Nuclear facilities. Instrumentation systems important to safety. Radiation monitoring for accident and post-accident conditions. General requirements
BS EN 13719:2016 Tracked Changes. Geosynthetics. Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
BS ISO 3616:2022 Tracked Changes. Textile glass. Chopped-strand and continuous-filament mats. Determination of average thickness, thickness under load and recovery after compression
BS EN ISO 14577-4:2016 Tracked Changes. Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN 1279-3:2018 Tracked Changes. Glass in building. Insulating glass units. Long term test method and requirements for gas leakage rate and for gas concentration tolerances
BS EN IEC 61300-3-7:2021 Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Wavelength dependence of attenuation and return loss of single mode components
BS ISO 15592-3:2022 Tracked Changes. Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determina...
BS EN ISO 7971-2:2019 Tracked Changes. Cereals. Determination of bulk density, called mass per hectolitre. Method of traceability for measuring instruments through reference to the international standard instrument
BS ISO 248-2:2019 Tracked Changes. Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
BS EN IEC 60332-3-10:2018 Tracked Changes. Tests on electric and optical fibre cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus
BS EN 45544-3:2015 Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Performance requirements for apparatus used for general gas detection
BS EN 60051-1:2017 Tracked Changes. Direct acting indicating analogue electrical measuring instruments and their accessories. Definitions and general requirements common to all parts
BS IEC 60951-3:2022 Tracked Changes. Nuclear facilities. Instrumentation systems important to safety. Radiation monitoring for accident and post-accident conditions. Equipment for continuous high range area gamma monitoring
BS EN IEC 61010-2-061:2021 Tracked Changes. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

Danish Standards Foundation, A better length gauge

DS/EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters

CENELEC - European Committee for Electrotechnical Standardization, A better length gauge

EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters

ES-UNE, A better length gauge

UNE-EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (Endorsed by AENOR in October of 2011.)
UNE-EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers (Endorsed by AENOR in July of 2016.)
UNE-EN IEC 62129-3:2019 Calibration of wavelength/optical frequency measurement instruments - Part 3:Optical frequency meters internally referenced to a frequency comb (Endorsed by Asociación Española de Normalización in September of 2019.)

CZ-CSN, A better length gauge

CSN 80 0204-1976 Determination of cotton fíbre length by rneans of meehanical instrumenta

Conference of European Post Telecommunication (CEPT), A better length gauge

CEPT/ERC/REC 01-09 E-1999 Relating to "Model Cross Border Agreement on Radio Monitoring" to Assist a Better Co-Operation on Spectrum Monitoring (Vienna 1999)

European Committee for Electrotechnical Standardization（CENELEC）, A better length gauge

EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
EN IEC 62129-3:2019 Calibration of wavelength/optical frequency measurement instruments - Part 3:Optical frequency meters internally referenced to a frequency comb

Lithuanian Standards Office , A better length gauge

LST EN 62129-2-2011 Calibration of wavelength/optical frequency measurement instruments -- Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011)
LST EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012)

RU-GOST R, A better length gauge

GOST 8910-1975 Measuring instruments of film length. Assumed perforation. Gear ratios
GOST R EN ISO 14596-2008 Petroleum products. Determination of sulfur content by method of wavelength-dispersive X-ray fluorescence spectrometry
GOST ISO 5530-2-2014 Wheat flour. Physical characteristics of doughs. Part 2. Determination of rheological properties using an extensograph
GOST R 8.841-2013 State system for ensuring the uniformity of measurement. Instruments for measurement of exposure and irradiance in the wavelength range 1 to 10 nm. Verification procedure
GOST R 8.863-2013 State system for ensuring the uniformity of measurements. Insruments for measurement power and irradiance in the wavelength range from 10 to 30 nm. Verification procedure
GOST 8.585-2013 State system for ensuring the uniformity of measurements. State verification chain for measuring instruments of length and signal propagation time in optical fiber, average power, attenuation and wavelength of optic radiation for fiber-optical communicati
GOST 8.585-2005 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of signal length and time of propagation in fibre, average power, attenuation and wavelength for system of fibre-optic transmission and of data

ZA-SANS, A better length gauge

SANS 4044:2007 Methods for determination of fibre length by comb sorter diagram

American Society for Testing and Materials (ASTM), A better length gauge

ASTM E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM D4964-96(2008)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM E2244-05 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2244-11 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2244-11(2018) Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E388-04(2015) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
ASTM E2244-02 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D828-22 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM E2244-11e1 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D1052-09(2019) Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM C490-04 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490-00a Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-11 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-11e1 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490-07 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-09 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-10 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-17 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM E1982-98(2007) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
ASTM F50-21 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM F50-12(2015) Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles

VE-FONDONORMA, A better length gauge

NORVEN 55-4-1960

International Organization for Standardization (ISO), A better length gauge

ISO 2646:1974 Wool - Measurement of the Length of Fibres Processed on the Worsted System, Using a Fibre Diagram Machine First Edition
ISO 14851:2019 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer
ISO 527-1:1993/Amd 1:2005 Plastics - Determination of tensile properties - Part 1: General principles; Amendment 1: Details of extensometer
ISO 5530-2:1988 Wheat flour; physical characteristics of doughs part 2: determination of rheological properties using an extensograph
ISO 2062:2009 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester

未注明发布机构, A better length gauge

BS EN ISO 22232-1:2020 Tracked Changes. Non-destructive testing. Characterization and verification of ultrasonic test equipment. Instruments
BS EN IEC 62129-3:2019 Calibration of wavelength / optical frequency measurement instruments Part 3 : Optical frequency meters internally referenced to a frequency comb
BS EN 1811:2023 Tracked Changes. Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin

Canadian General Standards Board （CGSB), A better length gauge

CGSB 88.21-M90-CAN/CGSB-1990 Graduations Et Marques Des Instruments De Mesure Lineaire Pour La Construction, L'Arpentage Et D'Autres Applications Particulieres
CGSB 9.0 NO. 4-92-CAN/CGSB-1992 Methodes D'Essai Des Pates Et Du Papier Comportement A La Traction Des Papiers Et Cartons (A L'Aide D'Un Appareil A Vitesse Constante D'Allongement)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, A better length gauge

GB/Z 42358-2023 Determination of Accuracy of Wavelength Dispersive X-ray Fluorescence Spectrometer for Iron Ore

Institute of Electrical and Electronics Engineers (IEEE), A better length gauge

IEEE Unapproved Draft Std P1431-2004/Cor1_D3, Apr IEEE Draft Standard for Corrigenda to Specification Format Guide and Test Procedure for Coriolis Vibratory Gyros (Corrigenda to IEEE Std 1431-2004)
IEEE P62582-3/FDIS, September 2012 Standard for Nuclear Power Plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 3: Elongation at break
IEEE/IEC 62582-3-2012 IEC/IEEE International Standard - Nuclear Power Plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 3: Elongation at break
IEEE/IEC P62582-3_D1, April 2011 IEEE/IEC Draft Standard for Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 3: Elongation at break
IEC/IEEE 62582-3:2011:2012 IIEC/IEEE International Standard - Nuclear Power Plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 3: Elongation at break

NZ-SNZ, A better length gauge

SAA/SNZ HB 86.2-1998 Guide to the Selection, Care, Calibration and Checking of Measuring Instruments in Industry Part 2: Simple Length and Angle Measuring Instruments

AENOR, A better length gauge

UNE 40208:1976 WOOL-MEASUREMENT OF THE LENGTH OF FIBRES PROCESSED ON THE WORSTED SYSTEM, USING A FIBRE DIAGRAM MACHINE
UNE-EN ISO 105-A05:1998 TEXTILES. TESTS FOR COLOUR FASTNESS. PART A05: INSTRUMENTAL ASSESSMENT OF CHANGE IN COLOUR FOR DETERMINATION OF GREY SCALE RATING (ISO 105-A05:1996, INCLUDING TECHNICAL CORRIGENDUM 1:1997).

ETSI - European Telecommunications Standards Institute, A better length gauge

TR 103 121-2013 Speech and multimedia Transmission Quality (STQ); Adaptation of the ETSI QoS Model to better consider results from field testing (V1.1.1; Includes Diskette)

TR-TSE, A better length gauge

TS 246-1965 METHOD OF DETERM1NING THE TENSILE STRENGTH, ELONGATION AND COUNT-STRENGTH PRODUCT OF YARN SKENS, BY THE CONSTANT SPEED DYNAMOMETER

IN-BIS, A better length gauge

GM Holden Ltd, A better length gauge

HOLDEN HN 0290-2012 Test for Elongation and Stretch Set of Automotive Fabrics Do Not Use on New Programs, No Replacement. Limited for current use

Japanese Industrial Standards Committee (JISC), A better length gauge

JIS A 1129-2:2010 Methods of measurement for length change of mortar and concrete -- Part 2: Method with contact-type strain gauge
JIS A 1129-1:2010 Methods of measurement for length change of mortar and concrete -- Part 1: Method with comparator
JIS A 1129-2:2001 Methods of test for length change of mortar and concrete Part 2: Method with contact-type strain gauge

The American Road & Transportation Builders Association, A better length gauge

AASHTO M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO R 70-2016 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

AASHTO - American Association of State Highway and Transportation Officials, A better length gauge

M 210-2009 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2006 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M210-1992 Standard Specification for Apparatus for Use in Measurement of Length Change of Hardened Cement Paste@ Mortar@ and Concrete (ASTM C490-89)
R 70M/R 70-2018 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
R 70-2016 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M210-1995 Standard Specification for Apparatus for Use in Measurement of Length Change of Hardened Cement Paste@ Mortar@ and Concrete (Eighteenth Edition; ASTM C490-93a)
M 210-2003 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete (ASTM Designation C 490-00a)
M 210-2002 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete (HM-22; Part IA; ASTM Designation C 490-00)

IEC - International Electrotechnical Commission, A better length gauge

TS 62129-3-2014 Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs (Edition 1.0)

International Electrotechnical Commission (IEC), A better length gauge

IEC 86/461/DTS:2013 IEC/TS 62129-3, Ed. 1: Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs
IEC 62129-3:2019 Calibration of wavelength/optical frequency measurement instruments - Part 3:Optical frequency meters internally referenced to a frequency comb
IEC/IEEE 62582-3-2012 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 3: Elongation at break
IEC TS 62129-3:2014 IEC/TS 62129-3, Ed. 1: Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs

International Telecommunication Union (ITU), A better length gauge

ITU-R SF.1843-2007 Methodology for determining the power level for high altitude platform stations ground terminals to facilitate sharing with space station receivers in the bands 47.2-47.5 GHz and 47.9-48.2 GHz

CEN - European Committee for Standardization, A better length gauge

EN 16842-7:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 7: Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length and longer

ISA - International Society of Automation, A better length gauge

ISA TR20.00.01-2001 Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations; Updated with 27 new specification forms in 2004-2006 (Reprinted 2006)
ISA TR20.00.01-2006 Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations; Updated with 27 new specification forms in 2004-2006 (ALSO INCLUDES ISA 20.00.03:2001)