ZH
RU
ES

bending and shearing loads,

bending and shearing loads,, Total:283 items.

In the international standard classification, bending and shearing loads, involves: Fibre optic communications, Sports equipment and facilities, Materials for the reinforcement of composites, Paper and board, Adhesives, Construction materials, Elements of buildings, Iron and steel products, Surface treatment and coating, Semi-manufactures of timber, Plastics, Mining and quarrying, Road engineering, Pipeline components and pipelines, Fasteners for aerospace construction, Fasteners, Gears, Structures of buildings, Reinforced plastics, Rubber, Road vehicle systems, Springs, Wood technology processes, Products of the textile industry, Wood-based panels.

American National Standards Institute （ANSI), bending and shearing loads,

ANSI/TIA-455-33-B-2005 FOTP33 - Optical Fiber Cable Tensile Loading and Bending
ANSI/TIA-455-33B-2005 FOTP-33 - Optical Fiber Cable Tensile Loading and Bending

International Organization for Standardization (ISO), bending and shearing loads,

ISO 7797:1985 Cross-country skis; Determination of breaking load and deflection at break with quasistatic load
ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 6336-3:2019 Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
ISO 75-2:2004 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
ISO 75-2:1993 Plastics; determination of temperature of deflection under load; part 2: plastics and ebonite
ISO 75-2:2013 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite

Korean Agency for Technology and Standards (KATS), bending and shearing loads,

KS G ISO 7797:2004 Cross-country skis－Determination of breakingload and deflection at break with quasistatic load
KS M 7123-1993 Testing Method for Stiffness of Paper by Bending Load
KS M 7123-2003 TESTING METHOD FOR STIFFNESS OF PAPER BY BENDING LOAD
KS M ISO 6238-2013(2018) Adhesives — Wood-to-wood adhesive bonds-Determination of shear strength by compression loading

GM Europe, bending and shearing loads,

GME L-9B-3-2007

American Gear Manufacturers Association, bending and shearing loads,

AGMA 97FTM7-1997 Bending Load on Internal Gears of Planetary Gear Sets

AGMA - American Gear Manufacturers Association, bending and shearing loads,

97FTM7-1997 Bending Load on Internal Gears of Planetary Gear Sets
2000FTM10-2000 Bending Fatigue Investigation under Variable Load Conditions on Case Carburized Gears
930-A05-2005 Calculated Bending Load Capacity of Powder Metallurgy (P/M) External Spur Gears

TIA - Telecommunications Industry Association, bending and shearing loads,

EIA-455-33A-1988 FOTP-33 Fiber Optic Cable Tensile Loading and Bending Test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, bending and shearing loads,

GB/T 31295-2014 The core to wind turbine blade.Determination of dimensional stability at elevated temperatures with flexural load and with compressive load

ESDU - Engineering Sciences Data Unit, bending and shearing loads,

ESDU 13008-2010 Fatigue strength of low-carbon steel stud threads under axial and combined axial and bending loading
ESDU 90016 B-2011 Natural frequencies of isotropic and orthotropic rectangular plates under static in-plane loading (including shear loading)
ESDU 90016 B-1993 Natural frequencies of isotropic and orthotropic rectangular plates under static in-plane loading (including shear loading).
ESDU 78023 A-2013 Fatigue strength of transverse fillet welded joints and attachments in steels under bending loading
STRUCT 01.06.02-1956 Form factors for flanged sections under combined bending and axial load.
STRUCT 01.06.01-1956 Form factors for circular sections under combined bending and axial load.
ESDU 18003-2019 Form factors for flanged sections under combined bending and axial load
ESDU 67024 C-1994 Buckling loads in shear of flat sandwich panels. (Isotropic face plates and orthotropic cores of zero flexural stiffness@ all edges simply-supported.)
ESDU 68030 B-1994 Buckling loads in shear of flat sandwich panels. (Isotropic face plates and orthotropic cores of zero flexural stiffness@ all edges clamped.)
ESDU 78023 A-1982 Fatigue strength of transverse welded joints and attachments in steels under bending loading.
ESDU 67026 C-1994 Buckling loads in shear of flat sandwich panels. (Isotropic face plates and corrugated cores@ all edges simply-supported.)
ESDU 68032 B-1994 Buckling loads in shear of flat sandwich panels. (Isotropic face plates and corrugated cores@ all edges clamped.)
ESDU 77027-1977 Fatigue of wrought and cast Ti-6Al-4V titanium alloy. (In bending and under axial loading.)
ESDU 85004-1985 Fatigue strength of steel stud threads under axial and combined axial and bending loading.
ESDU 79016 B-1998 Inelastic shear stresses and strains in the adhesives bonding lap joints loaded in tension or shear.
ESDU 83040 D-2013 Method for the rapid estimation of spanwise loading of wings with camber and twist in subsonic attached flow
ESDU 77033-1977 Fatigue of wrought and cast annealed Ti-5Al-2.5Sn titanium alloy. (In bending and under axial loading.)
ESDU 96036 A-1997 Design of laminated plates subjected to in-plane loads and bending moments.
STRUCT 01.06.03-1956 Form factors for angle@ tee and channel sections under combined bending and axial load.
ESDU 72019 B-1994 Buckling of flat isotropic plates under uniaxial and biaxial loading.
STRUCT 03.06.03 A-1983 Shear forces in circular frame due to concentrated loads and couples.
STRUCT 03.06.13-1952 Flexible circular frames supported by a shell. Shear forces in a frame due to tangential loads.
ESDU 95010 B-1997 COMPUTER PROGRAM FOR ESTIMATION OF SPANWISE LOADING OF WINGS WITH CAMBER AND TWIST IN SUBSONIC ATTACHED FLOW
ESDU 85007 C-1994 Contact phenomena. III: calculation of individual stress components in concentrated elastic contacts under combined normal and tangential loading.
ESDU 94007-1994 Elastic buckling of cylindrically curved laminated fibre reinforced composite panels with all edges simply-supported under biaxial loading.
ESDU 83040 C-1995 Method for the rapid estimation of spanwise loading of wings with camber and twist in subsonic attached flow.
STRUCT 03.06.16-1962 Flexible circular frames supporting a shell. Shear flow from shell to frame due to concentrated loads and couples.
ESDU 72017 A-1990 Stress response of flat or singly-curved sandwich panels with cores of zero flexural stiffness subjected to random acoustic loading.
TM 71-1990 A Rayleigh-Ritz method of analysis for vibration of orthotropic plates under static in-plane loading (including shear)
ESDU 74016-1974 The fatigue strength at high endurance of notched low alloy steel specimens (in bending and under axial loading@ zero mean stress).
ESDU 74016-2013 The fatigue strength at high endurance of notched low alloy steel specimens (in bending and under axial loading@ zero mean stress)
ESDU 90026 B-1994 Inelastic bending moments@ end loads@ stresses and strains for beam sections of general polygonal shape.
STRUCT 03.06.14-1952 Flexible circular frames supported by a shell. Shear forces in a frame due to concentrated radial loads.
ESDU 67025 C-1994 Buckling loads under combined longitudinal and transverse direct stress of flat sandwich panels. (Isotropic face plates and orthotropic cores of zero flexural stiffness@ all edges simply-supported.)

British Standards Institution (BSI), bending and shearing loads,

BS EN 15416-3:2007+A1:2010 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
BS EN 15416-3:2007 Adhesives for load bearing timber structures - Test methods - Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
BS EN 15416-3:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
21/30403937 DC BS EN 12372. Natural stone test methods. Determination of flexural strength under concentrated load
BS ISO 6238:2018 Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by compressive loading
BS EN 12372:2022 Tracked Changes. Natural stone test methods. Determination of flexural strength under concentrated load
BS EN ISO 75-2:2013 Plastics. Determination of temperature of deflection under load. Plastics and ebonite
BS ISO 6237:2017 Tracked Changes. Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by tensile loading
BS EN 17618:2021 Adhesives. Wood-to-wood adhesive bonds for non-structural applications. Determination of shear strength by compressive loading
BS EN 15416-2:2007 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 2: Static load test of multiple bondline specimens in compression shear
20/30425667 DC BS EN 17618. Adhesives. Wood-to-wood adhesive bonds for non-structural applications. Determination of shear strength by compressive loading
BS EN ISO 75-2:2004 Plastics - Determination of temperature of deflection under load - Plastics and ebonite
BS EN 302-8:2023 Tracked Changes. Adhesives for load-bearing timber structures. Test methods. Static load test of multiple bond line specimens in compression shear
BS 5080-2:1986 Structural fixings in concrete and masonry - Method for determination of resistance to loading in shear

Society of Automotive Engineers (SAE), bending and shearing loads,

SAE AIR1593-2013 Clamp Loads and Bending Stresses in Aircraft Tubing Installations
SAE AIR1593A-2020 Clamp Loads and Bending Stresses in Aircraft Tubing Installations

American Society for Testing and Materials (ASTM), bending and shearing loads,

ASTM C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120-06 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-06 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C203-05a Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C203-05 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C203-05a(2012) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C120/C120M-12 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM D905-98 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM C120-05 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
ASTM D905-08 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D905-08(2021) Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D3163-01(2023) Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM E2126-05 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
ASTM D905-03 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D3163-01 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D3163-96 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D3163-01(2008) Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D3164M-98 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading (Metric)
ASTM D3163-01(2014) Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D6463-99 Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM E2126-01 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings
ASTM E2126-02a Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings
ASTM E2126-02 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings
ASTM D6463/D6463M-06 Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D905-08e1 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D6463/D6463M-06(2012) Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D6463/D6463M-06(2020) Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D3166-99(2012) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D2919-01(2023) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D3166-99(2020) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D905-08(2013) Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM C1609/C1609M-19 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C120/C120M-15 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM D2293-96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D2295-96(2002) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D2295-96(2008) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D3528-96(2016) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D5656-10 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D8510/D8510M-23 Standard Test Method for Local Buckling and Crippling under Axial Compressive Loading
ASTM D5656-04 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D5656-04e1 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM E855-90(1995) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E855-21 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM D2294-96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D4680-98(2011) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D4680-98(2017) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM F2255-05 Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
ASTM E2126-09 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM F2255-05(2010) Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
ASTM D7966/D7966M-16(2023) Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM F2255-05(2015) Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
ASTM D3165-07(2023) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D2295-96(2016) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D7966/D7966M-16 Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM F2255-03 Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
ASTM D2339-98(2017) Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D906-98(2017) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM D4680-98(2023) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D3165-00 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D1002-10(2019) Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D3410/D3410M-03(2008) Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D3410/D3410M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D5656-95(2000) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM C947-03(2023) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D7998-19 Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
ASTM D7998-15 Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading

Association Francaise de Normalisation, bending and shearing loads,

NF P34-503:1995 Plaques profilées en tôles d'acier revêtues ou non et panneaux - Essais de flexion sous charges linéaires et/ou sous charges concentrées.
P08-353:1987 Roofs made of components. Bending test under concentrated load.
NF B10-621*NF EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
NF P98-535:1991 ROAD TRAFFIC SIGNS. SD2 TYPE TRAFFIC SIGNS. BENDING TEST UNDER A UNIFORMILY DISTRIBUTED LOAD.
NF EN ISO 899-2:2003 Plastiques - Détermination du comportement au fluage - Partie 2 : fluage en flexion par mise en charge en trois points
XP P38-504:2000 Plaques profilées éclairantes en matière plastique pour couverture en simple paroi - Essais de flexion statique sous charge répartie
NF P38-504:1984 GLASS FIBRE REINFROCED CORRUGATED OR RIBBED POLYESTER SHEETS. STATIC DEFLECTION TESTS UNDER DISTRIBUTED LOAD.
NF T51-103-2/A1*NF EN ISO 899-2/A1:2015 Plastics - Determination of creep behaviour - Part 2 : flexural creep by three-point loading - Amendment 1
NF EN ISO 899-2/A1:2015 Plastiques - Détermination du comportement au fluage - Partie 2 : fluage en flexion par mise en charge en trois points - Amendement 1
NF T76-094*NF EN 17618:2021 Adhesives - Wood-to-wood adhesive bonds for non- structural applications - Determination of shear strength by compressive loading
NF EN 61300-2-3:1997 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesure - Partie 2-3 : essais. Charge statique de cisaillement.
NF T51-005-2*NF EN ISO 75-2:2013 Plastics - Determination of temperature of deflection under load - Part 2 : plastics and ebonite
NF EN 846-7:2013 Méthodes d'essai des composants accessoires de maçonnerie - Partie 7 : détermination de la charge admissible au cisaillement et des caractéristiques effort-déformation des attaches résistant au cisaillement et des attaches de glissement (essai d...
NF P98-200-1:1991 Road testing. Measurement of a rolling load deflection. Part 1 : definitions, measurements, specific values.
NF T76-336-2:2008 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 2 : static load test of multiple bondline specimens in compression shear.
NF T76-152-8*NF EN 302-8:2017 Adhesives for load-bearing timber structures - Test methods - Part 8 : static load test of multiple bond line specimens in compression shear

AT-ON, bending and shearing loads,

ONORM S 4078-1984 Cross country skis; determination of breaking load and deflection at break under quasistatic load
OENORM EN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load
OENORM EN 17618-2020 Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading

Danish Standards Foundation, bending and shearing loads,

DS/EN 15340:2007 Thermal spraying - Determination of shear load resistance of thermally sprayed coatings
DS/EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
DS/EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
DS/EN 846-7:2012 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
DS/EN 846-3:2002 Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement
DS/ENV 658-4:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 4: Determination of shear strength by compression loading of notched specimens

Lithuanian Standards Office , bending and shearing loads,

LST EN 15340-2007 Thermal spraying - Determination of shear load resistance of thermally sprayed coatings
LST EN 1533-2010 Wood flooring - Determination of bending strength under static load - Test methods
LST EN 12372-2007 Natural stone test methods - Determination of flexural strength under concentrated load
LST EN 846-7-2012 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
LST ISO 6238:2003 Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by compressive loading (idt ISO 6238:2001)
LST ISO 6237:2006 Adhesives - Wood-to-wood adhesive bonds. Determination of shear strength by tensile loading (idt ISO 6237:2003)
LST EN 846-3-2000 Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement

AENOR, bending and shearing loads,

UNE-EN 15340:2008 Thermal spraying - Determination of shear load resistance of thermally sprayed coatings
UNE-EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
UNE-EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
UNE-EN 846-7:2015 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
UNE-EN 61300-2-3:1998 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-3: TESTS. STATIC SHEAR LOAD.
UNE-EN ISO 899-2:2003/A1:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)
UNE-EN 846-3:2001 Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement.
UNE-EN 302-8:2017 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear

German Institute for Standardization, bending and shearing loads,

DIN EN 15340:2007-06 Thermal spraying - Determination of shear load resistance of thermally sprayed coatings; German version EN 15340:2007
DIN 53424:1978 Testing of Rigid Cellular Materials; Determination of Dimensional Stability at Elevated Temperatures with Flexural Load and with Compressive Load
DIN EN 1533:2010-12 Wood flooring - Determination of bending strength under static load - Test methods; German version EN 1533:2010
DIN ISO 7797:1986 Cross country skis; determination of breaking load and deflection at break with quasistatic load; identical with ISO 7797, edition 1985
DIN EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
DIN EN 12372:2022-05 Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:2022
DIN EN 15416-3:2008 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear; German version EN 15416-3:2007
DIN 16841:2012 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
DIN 65736-3:1984 Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt material 1.7220.5
DIN 29735-4:1984 Aerospace; rivet calculation values, static load, for blind rivets with countersunk head, single shear
DIN 29734-4:1984 Aerospace; rivet calculation values, static load, for blind rivets with flat head, single shear
DIN 65736-1:1984 Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt materials 1.1174.7 and 1.4544.9
DIN 65736-5:1984 Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt materials 1.4944.4 and 1.7734.5
DIN 65736-7:1984 Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt material 1.6604.6
DIN EN 15416-3:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear; German version EN 15416-3:2017
DIN EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods; German version EN 1533:2010
DIN EN 15416-3:2010 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear; German version EN 15416-3:2007+A1:2010
DIN 29733-1:1984 Aerospace; rivet calculation values, static load, for close tolerance rivets of steel, with countersunk head, single shear
DIN SPEC 16457:2019-12 Short fiber reinforced thermoplastics - Tension-compression-shear test with tube specimens under cyclic loading
DIN 29732-1:1984 Aerospace; rivet calculation values, static load, for close tolerance rivets of steel with universal head, single shear
DIN 29733-3:1984 Aerospace; rivet calculation values, static load, for close tolerance bolts of titanium alloy, with countersunk head, single shear
DIN 29732-3:1984 Aerospace; rivet calculation-values, static load, for close tolerance bolts of titanium alloy, with protruding head, single shear
DIN EN 17618:2020 Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading; German and English version prEN 17618:2020
DIN EN 17618:2022-01 Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading; German version EN 17618:2021
DIN 29734-6:1989 Aerospace; rivet design values static load, for blind rivets according to NAS 1398D with protruding head, single shear
DIN 29734-8:1989 Aerospace; rivet design values static load, for blind rivets according to MS 20600AD with protruding head, single shear
DIN 29735-8:1989 Aerospace; rivet design values static load, for blind rivets according to MS 20601AD with countersunk head, single shear
DIN 29735-6:1989 Aerospace; rivet design values static load, for blind rivets according to NAS 1399D with countersunk head, single shear
DIN EN 15416-2:2008 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 2: Static load test of multiple bondline specimens in compression shear; English version of DIN EN 15416-2:2008-03
DIN 2413:2020-04 Seamless steel tubes for oil- and water-hydraulic systems - Calculation rules for pipes and elbows for dynamic loads
DIN 29731-5:1989 Aerospace; rivet design values static load, for countersunk rivet joints, single shear; rivet material 2.4360
DIN 29730-1:1989 Aerospace; rivet design values, static load, for universal head rivet joints, single shear; rivet materials 3.1124 and 3.1324
DIN 29730-2:1989 Aerospace; rivet design values, static load, for universal head rivet joints, double shear; rivet materials 3.1124 and 3.1324
DIN 29730-3:1989 Aerospace; rivet design values, static load, for universal head rivet joints, single shear; rivet material 3.3354
DIN 29730-5:1989 Aerospace; rivet values static load, for universal head rivet joints, single shear; rivet material 2.4360
DIN 29730-6:1989 Aerospace; rivet calculation values static load, for universal head rivet joints, double shear; rivet material 2.4360
DIN 29730-4:1989 Aerospace; rivet design values, static load, for universal head rivet joints, double shear; rivet material 3.3354
DIN 29731-51:1989 Aerospace; rivet design values static load, for countersunk rivet joints, single shear, dimpled; rivet materials 3.1124 and 3.1324
DIN 29731-52:1989 Aerospace; rivet design values static load, for countersunk rivet joints, double shear, dimpled; rivet materials 3.1124 and 3.1324
DIN 29731-6:1989 Aerospace; rivet design values static load, for countersunk rivet joints, single shear, dimpled; rivet material 2.4360
DIN EN 302-8:2017 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear; German version EN 302-8:2017
DIN EN 846-7:2012 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections); German version EN 846-7:2012
DIN 54813:1994 Testing of plastics; testing of joints of textile glass reinforced polyester resins; determination of the breaking load by the bending shear test
DIN 65495-301:1989 Aerospace; rivet design values, static load, for flush heat rivet joints, double shear; rivet material 3.1124, metric series
DIN 2413:2020 Seamless steel tubes for oil- and water-hydraulic systems - Calculation rules for pipes and elbows for dynamic loads
DIN 65495-402:1990 Aerospace; rivet design values, static load, for flush head rivet joints, double shear, dimpled, rivet material 3.1324, metric series
DIN EN 302-8:2022 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear; German and English version prEN 302-8:2022
DIN 2413:2011 Seamless steel tubes for oil- and water-hydraulic systems - Calculation rules for pipes and elbows for dynamic loads
DIN 65495-105:1989 Aerospace; rivet design values, static load, flush head rivet joints, single shear; rivet material 2.4360, metric series
DIN 65495-302:1989 Aerospace; rivet design values, static load, for flush heat rivet joints, double shear; rivet material 3.1324, metric series
DIN EN 17618:2022 Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading; German version EN 17618:2021
DIN 65494-102:1989 Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.1324, metric series
DIN 65494-103:1989 Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.3354, metric series
DIN 65494-305:1989 Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 2.4360, metric series
DIN 65494-302:1989 Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.1324, metric series
DIN 65494-303:1989 Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.3354, metric series
DIN 65495-102:1989 Aerospace; rivet design values, static load, for flush head rivet joints, single shear; rivet material 3.1324, metric series
DIN 65494-105:1989 Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 2.4360, metric series
DIN 65494-101:1989 Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.1124, metric series
DIN 65495-101:1989 Aerospace; rivet design values, static load, for flush head rivet joints, single shear; rivet material 3.1124, metric series
DIN 65494-301:1989 Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.1124, metric series
DIN 65495-201:1990 Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 3.1124, metric series
DIN 65495-202:1990 Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 3.1324, metric series
DIN 65495-205:1990 Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 2.4360, metric series
DIN 65495-401:1990 Aerospace; rivet design values, static load, for flush head rivet joints, double shear, dimpled, rivet material 3.1124, metric series

CZ-CSN, bending and shearing loads,

CSN ISO 7797:1993 Cross-country skis. Determination of breaking load and deflection at break with quasistatic load
CSN 34 6318-1987 Testing of ceramic elektrotechnic materials.Test of long time loading in the flexure

FI-SFS, bending and shearing loads,

SFS 3229-1976

ACI - American Concrete Institute, bending and shearing loads,

ACI 342R-2016 Report on Flexural Live Load Distribution Methods for Evaluating Exisiting Bridges
ACI SP-236-2006 Deformation Capacity and Shear Strength of Reinforced Concrete Members Uncer Cyclic Loading

WRC - Welding Research Council, bending and shearing loads,

BULLETIN 450-2000 NPS 4 CLASS 150 BOLTED FLANGED JOINTS SUBJECTED TO PRESSURE AND EXTERNAL BENDING LOADS
BULLETIN 179-1972 STRESS INDICES AND FLEXIBILITY FACTIORS FOR MOMENT LOADINGS ON ELBOWS AND CURVED PIPE

American Welding Society (AWS), bending and shearing loads,

WRC 450:2000 NPS 4 Class 150 Bolted Flanged Joints Subjected To Pressure And External Bending Loads
WRC 179:1972 Stress Indices and Flexibility Factors for Moment Loadings on Elbows and Curved Pipe

European Committee for Standardization (CEN), bending and shearing loads,

FprEN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load
EN 15416-3:2007 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear (Incorporates Amendment A1: 2010)
EN 15416-3:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
EN 15416-2:2007 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 2: Static load test of multiple bondline specimens in compression shear
FprEN 17618-2021 Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading
EN ISO 75-2:1996 Plastics - Determination of Temperature of Deflection under Load - Part 2: Plastics and Ebonite (ISO 75-2 : 1993)
EN ISO 75-2:2013 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
EN 302-8:2017 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear
prEN 846-9-1992 Methods of tests for ancillary components for masonry; part 9: determination of flexural resistance, shear load resistance and stiffness of lintels

ES-UNE, bending and shearing loads,

UNE-EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
UNE-EN 17618:2022 Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading

NL-NEN, bending and shearing loads,

NEN 3057-1970 Plastics. Determlnation of temperature of deflectlon under load and deflection temperature range

NZ-SNZ, bending and shearing loads,

AS/NZS 1635.10.1:1995 Methods of Test for Pressure-Sensitive Adhesive Tape Method 10.1: Resistance to Shear Loading at Elevated Temperatures

National Aeronautics and Space Administration (NASA), bending and shearing loads,

NASA NACA-TN-951-1945 Tests on thin-walled celluloid cylinders to determine the interaction curves under combined bending, torsion, and compression or tension loads
NASA-TP-2215-1964 Buckling loads of stiffened panels subjected to combined longitudinal compression and shear: Results obtained with PASCO, EAL, and STAGS computer programs

The American Road & Transportation Builders Association, bending and shearing loads,

AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

AASHTO - American Association of State Highway and Transportation Officials, bending and shearing loads,

T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

Group Standards of the People's Republic of China, bending and shearing loads,

T/CSAE 155-2020 U-shaped constant bending load test method for hydrogen induced delayed fracture sensitivity of ultra high strength automobile steel plate

CENELEC - European Committee for Electrotechnical Standardization, bending and shearing loads,

EN 61300-2-3:1997 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-3: Tests - Static Shear Load

ZA-SANS, bending and shearing loads,

SANS 10183-4-5:2009 Adhesives for wood Part 4-5: Test methods - Static load test of multiple bondline specimens in compression shear

CEN - European Committee for Standardization, bending and shearing loads,

EN 15416-3:2017/PRA1:2018 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear

IN-BIS, bending and shearing loads,

IS 6441 Pt.8-1973

未注明发布机构, bending and shearing loads,

BS 5080-2:1986(2008) Methods of test for Structural fixings in concrete and masonry — Part 2 : Method for determination of resistance to loading in shear

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, bending and shearing loads,

GB/T 32076.8-2017 High-strength structural bolting assemblies for preloading—Part 8: Torshear type bolt with cup head,and nut assemblies