ZH
RU
ES

denatured collagen

denatured collagen, Total:498 items.

In the international standard classification, denatured collagen involves: Adhesives, Extraction and processing of petroleum and natural gas, Pharmaceutics, Rubber, Test conditions and procedures in general, Products of the textile industry, Paper and board, Raw materials for rubber and plastics, Rubber and plastics products, Cinematography, Footwear, Analytical chemistry, Textile fibres, Construction materials, Animal feeding stuffs, Medical sciences and health care facilities in general, Metalliferous minerals, Earthworks. Excavations. Foundation construction. Underground works, Astronomy. Geodesy. Geography, Measurement of volume, mass, density, viscosity, Nuclear energy engineering, Biology. Botany. Zoology, Materials for aerospace construction, Radiation measurements, Vocabularies, Bearings, Mechanical testing, Wood-based panels, Photography, Non-metalliferous minerals, Farming and forestry, Laboratory medicine, Paints and varnishes, Reinforced plastics, Road engineering, Elements of buildings, Shipbuilding and marine structures in general, Structures of buildings, Medical equipment, Civil engineering in general, Environmental testing, Pipeline components and pipelines.

国家市场监督管理总局、中国国家标准化管理委员会, denatured collagen

GB/T 39294-2020 Determination of the discoloration performence for adhesive
GB/T 37564-2019 Test method of creep performance for dipped cords
GB/T 38482-2021 Determination of animal type Ⅰ collagen—Polyacrylamide gel electrophoresis

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, denatured collagen

GB/T 28910-2012 The measurement method of crude oil rheological properties
GB/T 528-1998 Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties
GB/T 7757-1993 Rubber,vulcanized or thermoplastic.Determination of compression stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties
GB/T 7757-2009 Rubber,vulcanized or thermoplastic—Determiantion of compression stress-strain properties
GB/T 7757-2009 Rubber,vulcanized or thermoplastic—Determiantion of compression stress-strain properties
GB/T 7757-2009"> Rubber,vulcanized or thermoplastic—Determiantion of compression stress-strain properties
GB 16380-1996 Diagnostic criteria and principles of management of occupational acute allergic alveolitis
GB 7808-1987 Diagnostic criteria and principles of management of occupational melanosis
GB/T 12828-1991 Rubber, raw and unvulcanized compounded--Determination of plasticity number and recovery number--Parallel plate method
GB/T 12828-2006 Rubber, raw and unvalcanized compounded Determination of plasticity number and recovery number Parallel plate method
GB/T 7759-1996 Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures
GB/T 42279-2022 Rubber,vulcanized or thermoplastic—Determination of tension set under constant elongation,and of tension set,elongation and creep under constant tensile load
GB/T 7750-1987 The method of creep properties of adhesive in shear by tension loading (metal to metal)
GB 7750-1987 Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)
GB/T 7759.2-2014 Rubber, vulcanized or thermoplastic.Determination of compression set.Part 2:At low temperatures
GB/T 7759.1-2015 Rubber, vulcanized or thermoplastic.Determination of compression set.Part 1:At ambient or elevated temperatures
GB/T 13937-1992 Rubber.Determination of dynamic properties of vulcanizates for classification purposes(by forced sinusoidal shear strain)
GB/T 16996-1997 Rubber, vulcanized--Assessment of changes in properties after exposure to natural weathering or artificial light
GB/T 15584-1995 Rubber, vulcanized--Determination of temperature rise and resistance to fatigue in flexometer testing--Part 1: Basic principles

Group Standards of the People's Republic of China, denatured collagen

T/CSBM 0024-2022 Sol-gel derived bioactive glass materials
T/CTES 1006-2017 Waterbased colorant for viscose dope dyeing
T/CSBM 0034-2023 Sol-gel derived borosilicate bioactive glasses raw materials
T/CACM 1257-2019 Clinical guidelines for diagnosis and treatment of ophthalmology in TCM Primary retinitis pigmentosa
T/CAB 0063-2020 Detection method of Type Ⅲ collagen promoting cell adhesion Spectrophotometry
T/CGDF 00039-2023 Standard operating procedure for subcutaneous immunotherapy with standardized house dust mite allergen extract

GM North America, denatured collagen

GM GM9028P-1988 Adhesion-Creep Characteristics of Adhesives on Sponge Rubber

Korean Agency for Technology and Standards (KATS), denatured collagen

KS M 6785-1994 Testing methods of stress-strain properties at low deformation for vulcanized rubber
KS M 6785-2017 Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS M 6785-2017(2022) Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS M 6785-1999 Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS M ISO 37-2007(2017) Rubber, vulcanized or thermoplastic－Determination of tensile stress－strain properties
KS M ISO 7743-2016(2021) Rubber, vulcanized or thermoplastic－Determination of compression stress-strain properties
KS M ISO 7743:2022 Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
KS M 6791-2014 Permanent set testing methods for rubber, vulcanized or thermoplastic
KS M ISO 22768:2021 Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry(DSC)
KS B ISO 7146-2007(2012) Plain bearings－Terms, characteristics and causes of damage and changes in appearance
KS M 6772-2014 Determination of tension set at high temperatures for vulcanized or thermoplastic rubber
KS M ISO 7743:2011 Rubber, vulcanized or thermoplastic-Determination of compression stress-strain properties
KS M ISO 7743:2016 Rubber, vulcanized or thermoplastic－Determination of compression stress-strain properties
KS M ISO 37:2007 Rubber, vulcanized or thermoplastic－Determination of tensile stress－strain properties
KS M ISO 1431-1:2009 Rubber, vulcanized or thermoplastic-Resistance to ozone cracking- Part 1:Static and dynamic strain testing
KS M ISO 1431-2:2004 Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Part 2：Dynamic strain test
KS M ISO 1431-1:2014 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
KS A ISO 3042:2018 Cinematography — Labelling of containers for raw-stock motion-picture films and magnetic films — Minimum information specifications
KS A ISO/ASTM 51275-2005(2020) Practice for use of a radiochromic film dosimetry system
KS B ISO 7146:2007 Plain bearings-Terms, characteristics and causes of damage and changes in appearance
KS M ISO 815-2:2021 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures
KS M ISO 815-2:2015 Rubber, vulcanized or thermoplastic-Determination of compression set-Part 2:At low temperatures
KS M ISO 8013:2011 Rubber, vulcanized-Determination of creep in compression or shear
KS M 6785-2009 Testing methods of stress-strain properties at low deformation for vulcanized rubber
KS M ISO 2285-2014(2019) Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
KS M ISO 815-2:2010 Rubber, vulcanized or thermoplastic-Determination of compression set-Part 2:At low temperatures
KS M ISO 815-1:2021 Rubber, vulcanized or thermoplastic —Determination of compression set —Part 1: At ambient or elevated temperatures
KS M ISO 1431-1-2014(2019) Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
KS V ISO 19030-1:2018 Ships and marine technology — Measurement of changes in hull and propeller performance — Part 1: General principles
KS M ISO 815-1:2010 Rubber, vulcanized or thermoplastic-Determination of compression set-Part 1:At ambient or elevated temperatures
KS M ISO 815-1:2015 Rubber, vulcanized or thermoplastic-Determination of compression set-Part 1:At ambient or elevated temperatures
KS M ISO 4666-1:2010 Rubber, vulcanized-Determination of temperature rise and resistance to fatigue in flexometer testing-Part 1:Basic principle
KS M ISO 4666-1-2015(2021) Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 1：Basic principle
KS M ISO 4666-1:2015 Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 1：Basic principle

American Society for Testing and Materials (ASTM), denatured collagen

ASTM D4853-97 Standard Guide for Reducing Test Variability
ASTM D4853-97(2002) Standard Guide for Reducing Test Variability
ASTM C639-01 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-95 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-15(2020) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM D6204-04 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-99 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-01 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-05 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-15 Standard Test Method for Rubber&x2014;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D395-03 Standard Test Methods for Rubber Property8212;Compression Set
ASTM D395-03(2008) Standard Test Methods for Rubber Property8212;Compression Set
ASTM C1749-17 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
ASTM C1749-17a Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
ASTM D2507-93 Standard Terminology of Rheological Properties of Gelled Rocket Propellants
ASTM D4553-90(1995) Standard Test Method for Determining In Situ Creep Characteristics of Rock
ASTM D4553-18 Standard Test Method for Determining In Situ Creep Characteristics of Rock
ASTM D7271-06(2012) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM D395-01 Standard Test Methods for Rubber Property-Compression Set
ASTM D395-98 Standard Test Methods for Rubber Property-Compression Set
ASTM D395-02 Standard Test Methods for Rubber Property8212;Compression Set
ASTM D395-14 Standard Test Methods for Rubber Propertymdash;Compression Set
ASTM D395-16 Standard Test Methods for Rubber Property&x2014;Compression Set
ASTM C1874-19 Standard Test Method for Measuring the Rheological Properties of Cementitious Materials Using a Coaxial Rotational Rheometer
ASTM C1874-20 Standard Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer
ASTM D395-16e1 Standard Test Methods for Rubber Property—Compression Set
ASTM D8491-22 Standard Test Method for Recovered Carbon Black—Rheological Non-Linearity of a Rubber Compound by Fourier Transform Rheology
ASTM D6204-07 Standard Test Method for Rubber-Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-12 Standard Test Method for Rubbermdash;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D8491-23 Standard Test Method for Recovered Carbon Black—Rheological Non-Linearity of a Rubber Compound by Fourier Transform Rheology
ASTM D1229-03 Standard Test Method for Rubber Property8212;Compression Set at Low Temperatures
ASTM E251-92(2014) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM E251-92(2009) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM D1229-03(2015) Standard Test Method for Rubber Property&x2014;Compression Set at Low Temperatures
ASTM D5668-99 Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter
ASTM D5668-99(2003) Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter
ASTM D5668-08 Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter
ASTM D5668-09(2014) Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter
ASTM D6204-19a Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-19 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D1229-87(1997)e1 Standard Test Method for Rubber Property-Compression Set at Low Temperatures
ASTM D1460-86(2001) Standard Test Method for Rubber Property8212;Change in Length During Liquid Immersion
ASTM D1460-86(1997)e1 Standard Test Method for Rubber Property8212;Change in Length During Liquid Immersion
ASTM D1460-86(2005) Standard Test Method for Rubber Property8212;Change in Length During Liquid Immersion
ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D1229-03(2019) Standard Test Method for Rubber Property—Compression Set at Low Temperatures
ASTM D5667-95(2005) Standard Test Method for Rubber From Synthetic Sources-Total and Water Soluble Ash
ASTM F3089-14 Standard Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions
ASTM D6049-03(2022) Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM C1197-20e1 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
ASTM C1197-20 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
ASTM D1460-86(2020) Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
ASTM D5099-08(2022) Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
ASTM D1460-86(2014) Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
ASTM D5099-08 Standard Test Methods for Rubberx2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM D6601-15 Standard Test Method for Rubber Properties&x2014;Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM D7271-06 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM D3959-91(1997) Standard Test Method for Rubber- and Plastic-Coated Fabrics8212;Discoloration Sensitivity to Tobacco Smoke
ASTM D1460-86(2010) Standard Test Method for Rubber Property8212;Change in Length During Liquid Immersion
ASTM D5099-08(2013) Standard Test Methods for Rubbermdash;Measurement of Processing Properties Using Capillary Rheometry
ASTM D5099-08(2017) Standard Test Methods for Rubber&x2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM D5667-95(2015) Standard Test Method for Rubber From Synthetic Sources&x2014;Total and Water Soluble Ash
ASTM D4027-98(2004) Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D4027-98 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D4394-84(1998) Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Rigid Plate Loading Method
ASTM D4854-95(2001) Standard Guide for Estimating the Magnitude of Variability from Expected Sources in Sampling Plans
ASTM D4395-17 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
ASTM D4394-17 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method
ASTM D6601-12 Standard Test Method for Rubber Propertiesmdash;Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM D4395-84(1998) Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Flexible Plate Loading Method
ASTM F2212-02 Standard Guide for Characterization of Type I Collagen as a Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
ASTM F2212-02(2007)e1 Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
ASTM F2212-09 Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
ASTM D2293-96 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D2293-96(2002) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D2294-96(2002) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D2294-96 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D2293-96(2008) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D2294-96(2008) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D4027-98(2011) Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D2556-11 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
ASTM D8015-15(2019) Standard Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments
ASTM D3959-91(2001) Standard Test Method for Rubber- and Plastic-Coated Fabrics—Discoloration Sensitivity to Tobacco Smoke
ASTM D395-18 Standard Test Method for Rubber- and Plastic-Coated Fabrics—Discoloration Sensitivity to Tobacco Smoke
ASTM D2556-14 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
ASTM D395-15 Standard Test Methods for Rubber Property&x2014;Compression Set
ASTM D8015-15 Standard Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments
ASTM D6499-00 Standard Test Method for the Immunological Measurement of Antigenic Protein in Natural Rubber and its Products
ASTM D6499-03 Standard Test Method for the Immunological Measurement of Antigenic Protein in Natural Rubber and its Products
ASTM D6601-02 Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM D6601-19 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM D2556-93a(2005) Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
ASTM D2556-93a(1997) Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
ASTM D2294-96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D8011-16 Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol
ASTM D6601-00 Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer

IT-UNI, denatured collagen

UNI 7701-1977
UNI 7703-1977
UNI 7719-1978
UNI 4901-1962
UNI 2033-1942
UNI 5874-1966
UNI 5255-1963
UNI 7695-1977
UNI 7276-1974
UNI 4902-1962
UNI 4904-1962
UNI 5615-1965
UNI 5256-1963
UNI 5614-1965
UNI 6077-1967
UNI 6076-1967
UNI 4903-1962
UNI 7379-1974
UNI 5875-1966
UNI 7718-1977
UNI 6481-1969
UNI 7878-1978 Elastomers. Tests on latices. Quantitative determination of free butadiene in latex containing butadiene copolymers.

German Institute for Standardization, denatured collagen

DIN 78082-1:1991 Raw materials for the rubber industry; styrene-butadiene rubber; typical characteristics
DIN 53545:2016-12 Testing of rubber - Determination of low-temperature behaviour of elastomers - Principles and test methods
DIN 53545:1990 Determination of low-temperature behaviour of elastomers; principles and test methods
DIN 740-2:1986-08 Power transmission engineering; flexible shaft couplings; parameters and design principles
DIN 53517:1987 Testing of rubber and elastomers; determination of compression set after constant strain
DIN 25403-1:1991 Criticality safety in processing and handling of fissile materials; principles
DIN 54458:2013 Structural adhesives - Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillation rheometry
DIN 78081-1:1991 Raw materials for use in the rubber industry; carbon black; typical characteristics
DIN 53529-1:1983 Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); general working principles
DIN 53529-1:1983-03 Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); general working principles
DIN ISO 2285:2022-11 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2019)
DIN EN ISO 9047:2003 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001); German version EN ISO 9047:2003
DIN 15552-1:1989 Magnetic film 17,5 mm and 35 mm; raw stock, material, outfit
DIN 58924:2022 Haemostaseology - Reference method for the determination of the collagen binding acitvity of the VWF; Text in German and English
DIN 58924:2021 Haemostaseology - Reference method for the determination of the collagen binding acitvity of the VWF; Text in German and English
DIN SPEC 91143-2:2012-09 Modern rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
DIN 58924:2009 Haemostaseology - Reference method for the determination of the collagen binding acitvity of the VWF; Text in German and English
DIN 15655-1:1989 Magnetic film perforated along one edge; raw stock, material, outfit
DIN 58924:2022-05 Haemostaseology - Reference method for the determination of the collagen binding acitvity of the VWF; Text in German and English
DIN ISO 2285:2013 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2013)
DIN ISO 7743:2006 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties (ISO 7743:2004) English version of DIN ISO 7743:2006-11
DIN ISO 7743:2016 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties (ISO 7743:2011)
DIN EN 13880-4:2003 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance; Change in penetration value; German version EN 13880-4:2003
DIN 15586-3:1985 Testing of mechanical properties of radiation sensitive film materials; determination of the dimensional change of photographic films and papers
DIN EN 15977:2011-05 Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation; German version EN 15977:2011
DIN ISO 3384-1:2015 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013)
DIN ISO 815:2000 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993)
DIN ISO 1431-1:2017 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing (ISO 1431-1:2012)
DIN EN 26891:1991 Timber structures; joints made with mechanical fasteners; general principles for the determination of strength and deformation characteristics (ISO 6891:1983); german version EN 26891:1991
DIN EN 26891:1991-07 Timber structures; joints made with mechanical fasteners; general principles for the determination of strength and deformation characteristics (ISO 6891:1983); german version EN 26891:1991
DIN 16839:2010 Thermoplastics materials for fittings - Polysulfone (PSU) - General quality requirements and testing; Text in German and English

Association Francaise de Normalisation, denatured collagen

NF Q15-005:1976 Paper and board. Characteristics of backing paper for coating.
NF T46-062*NF ISO 7743:2018 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
NF T46-002*NF ISO 37:2018 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
NF T46-062:2012 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties.
NF Q15-008:1976 Paper and board. Characteristics of body paper for gummed paper and adhesive kraftpaper.
NF T43-120:2012 Rubber - Determination of magnesium content of field and concentrated natural rubber latex by titration.
NF ISO 6502-3:2023 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide de rhéomètres - Partie 3 : rhéomètre sans rotor
NF ISO 6502-2:2018 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide de rhéomètres- Partie 2 : rhéomètre à disque oscillant
NF T46-002:2012 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties.
NF ISO 37:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination des caractéristiques de contrainte-déformation en traction
NF T46-011-2*NF ISO 815-2:2020 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2 : at low temperatures
NF T46-026-3*NF ISO 4664-3:2021 Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 3 : glass transition temperature (Tg)
NF ISO 4664-3:2021 Caoutchouc vulcanisé ou thermoplastique - Détermination des propriétés dynamiques - Partie 3 : température de transition vitreuse (Tg)
NF ISO 7743:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination des propriétés de contrainte/déformation en compression
NF T43-100*NF ISO 20163:2019 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
NF T46-009*NF ISO 2285:2019 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
NF ISO 2930:2017 Caoutchouc naturel brut - Détermination de l'indice de rétention de plasticité (PRI)
NF EN ISO 10590:2005 Construction immobilière - Mastics - Détermination des propriétés de déformation des mastics sous traction maintenue après immersion dans l'eau
NF ISO 6502-1:2018 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide du rhéomètres - Partie 1 : introduction
NF T46-011-2:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2 : at low temperatures.
NF T46-011-2:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2 : at low temperatures
NF T46-009:2013 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
NF T46-011-1:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1 : at ambient or elevated temperatures.
NF T46-011-1:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1 : at ambient or elevated temperatures
NF T46-011-1*NF ISO 815-1:2020 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1 : at ambient or elevated temperatures
NF ISO 2285:2019 Caoutchouc vulcanisé ou thermoplastique - Détermination de la déformation rémanente sous allongement constant et de la déformation rémanente, de l'allongement et du fluage sous charge constante de traction
NF ISO 20163:2019 Caoutchouc vulcanisé ou thermoplastique - Détermination de la déformation rémanente sous allongement constant et de la déformation rémanente, de l'allongement et du fluage sous charge constante de traction
NF P98-880-4*NF EN 13880-4:2003 Hot applied joint sealants - Part 4 : test method for the determination of heat resistance - Change in penetration value
NF ISO 815-2:2020 Caoutchouc vulcanisé ou thermoplastique - Détermination de la déformation rémanente après compression - Partie 2 : à basses températures
NF T46-019-1*NF ISO 1431-1:2012 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: static and dynamic strain testing
NF EN 61947-2:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 2 : projecteurs à résolution variable
NF G37-139*NF EN 15977:2011 Rubber or plastic-coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation.
NF EN 26891:1991 Structures en bois - Assemblages réalisés avec des éléments mécaniques de fixation - Principes généraux pour la détermination des caractéristiques de résistance et de déformation.
NF P21-310*NF EN 26891:1991 Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics.
NF T46-045-1*NF ISO 4666-1:2010 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 1 : basic principles
NF EN 15977:2011 Supports textiles revêtus de caoutchouc ou de plastique - Propriétés mécaniques - Détermination de l'allongement sous charge et de la déformation résiduelle

VN-TCVN, denatured collagen

TCVN 4509-2006 Rubber, vulcanized or thermoplastic.Determination of tensile stress-strain properties
TCVN 5320-2-2016 Rubber,vulcanized or thermoplastic - Determination of compression set .Part 2: At low temperatures
TCVN 5320-1-2016 Rubber,vulcanized or thermoplastic - Determination of compression set .Part 1:At ambient or elevated temperatures
TCVN 5320-2-2008 Rubber, vulcanized or thermoplastic.Determination of compression set.Part 2: At low temperatures
TCVN 5320-1-2008 Rubber, vulcanized or thermoplastic.Determination of compression set.Part 1: At ambient or elevated temperatures

TH-TISI, denatured collagen

TIS 1847-1999 Rubber vulcanized or thermoplastic.determination of tensile stress.strain properties

International Organization for Standardization (ISO), denatured collagen

ISO 7743:2008 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
ISO/DIS 37:2023 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 7743:2004 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
ISO 7743:1989 Rubber, vulcanized or thermoplastic; determination of compression stress-strain properties
ISO 22768:2017 Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry (DSC)
ISO 37:1977 Rubber, vulcanized; Determination of tensile stress-strain properties
ISO 4695:2007 Iron ores for blast furnace feedstocks - Determination of the reducibility by the rate of reduction index
ISO 4695:2015 Iron ores for blast furnace feedstocks - Determination of the reducibility by the rate of reduction index
ISO 4695:2021 Iron ores for blast furnace feedstocks - Determination of the reducibility by the rate of reduction index
ISO 37:1976 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 37:2011 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 37:2005 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 37:2017 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 37:1994 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 7743:2011 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
ISO 7743:2017 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
ISO/DIS 1431-1:1982 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
ISO 7215:2007 Iron ores for blast furnace feedstocks - Determination of the reducibility by the final degree of reduction index
ISO 7215:2015 Iron ores for blast furnace feedstocks - Determination of the reducibility by the final degree of reduction index
ISO 37:2005/Cor 1:2008 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties; Technical Corrigendum 1
ISO 4664:1978 Rubber — Determination of dynamic properties of vulcanizates for classification purposes (by forced sinusoidal shear strain)
ISO 8013:2006 Rubber, vulcanized - Determination of creep in compression or shear
ISO 8013:1988 Rubber, vulcanized; determination of creep in compression or shear
ISO 8013:2012 Rubber, vulcanized - Determination of creep in compression or shear
ISO 2285:2019 Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
ISO 7743:1989/Cor 1:1990 Rubber, vulcanized or thermoplastic; determination of compression stress-strain properties; technical corrigendum 1
ISO 815-2:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures
ISO 815-2:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures
ISO 1431-1:2022 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
ISO 6221:1980 Photography — Photographic films and papers — Determination of the dimensional change characteristics
ISO 1431-2:1982 Rubber, vulcanized; Resistance to ozone cracking; Part 2 : Dynamic strain test
ISO 4074-7:1986 Rubber condoms; Part 7 : Determination of resistance to deterioration during storage
ISO 2285:2007 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
ISO 2285:2013 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
ISO 4664:1987 Rubber; Determination of dynamic properties of vulcanizates for classification purposes (by forced sinusoidal shear strain)
ISO 815-1:2019 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
ISO 3384-1:2011 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature
ISO 1431-2:1994 Rubber, vulcanized or thermoplastic; resistance to ozone cracking; part 2: dynamic strain test
ISO 1431-1:1989 Rubber, vulcanized or thermoplastic; resistance to ozone cracking; part 1: static strain test
ISO 6891:1983 Timber structures; Joints made with mechanical fasteners; General principles for the determination of strength and deformation characteristics
ISO 1431-1:2012 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
ISO 1431-1:1980/Amd 1:1982 Rubber vulcanized — Resistance to ozone cracking — Part 1: Static strain test — Amendment 1
ISO 4665-1:1985 Rubber, vulcanized; Resistance to weathering; Part 1 : Assessment of changes in properties after exposure to natural weathering or artificial light
ISO 4664-3:2021 Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 3: Glass transition temperature (Tg)
ISO 2285:2001 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
ISO 1431-1:2004 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
ISO 815:1991 Rubber, vulcanized or thermoplastic; determination of compression set at ambient, elevated or low temperatures
ISO 19030-1:2016 Ships and marine technology - Measurement of changes in hull and propeller performance - Part 1: General principles
ISO 815-1:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
ISO 815-1:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
ISO/CD 4931-1 Buildings and civil engineering works — Principles, framework and guidance for resilience design — Part 1: Adaptation to climate change
ISO/DIS 4931-1:2023 Buildings and civil engineering works — Principles, framework and guidance for resilience design — Part 1: Adaptation to climate change
ISO 3384-1:2011/Amd 1:2013 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature - Amendment 1: Revised calibration schedule
ISO 4666-1:2010 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 1: Basic principles
ISO 1431-1:2004/Amd 1:2009 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing; Amendment 1

ZA-SANS, denatured collagen

SANS 7743:2003 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
SANS 10037:2009 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
SANS 11431-1:2003 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking Part 1: Static strain test
SANS 10037:2003 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
SANS 10815-2:2009 Rubber, vulcanized or thermoplastic - Determination of compression set Part 2: At low temperatures
SANS 7146:2005 Plain bearings - Terms, characteristics and causes of damage and changes in appearance
SANS 10815:2003 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures
SANS 10815-1:2009 Rubber, vulcanized or thermoplastic - Determination of compression set Part 1: At ambient or elevated temperatures
SANS 6891:1983 Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics

Japanese Industrial Standards Committee (JISC), denatured collagen

JIS K 6251:2017 Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
JIS K 7556:1985 Dimensions of cores for motion-picture raw stock and magnetic sound recording films
JIS K 6254:2003 Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties at low deformation
JIS K 6254:1993 Testing methods of stress-strain properties at low deformation for vulcanized rubber
JIS K 6254:2010 Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties
JIS K 6254:2016 Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties
JIS K 6273:2006 Rubber, vulcanized or thermoplastic -- Determination of tension set, elongation and creep
JIS K 6273:2018 Rubber, vulcanized or thermoplastic -- Determination of tension set, elongation and creep
JIS K 6251:2004 Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
JIS K 6251:2010 Rubber, vulcanized or thermoplastics -- Determination of tensile stress-strain properties
JIS B 1583:1999 Plain bearing -- Terms, characteristics and causes of damage and changes in appearance
JIS K 6270:2001 Rubber, vulcanized or thermoplastics -- Determination of tension fatigue -- Constant strain method
JIS K 6270:2018 Rubber, vulcanized or thermoplastics -- Determination of tension fatigue (Constant strain method)
JIS K 7620:1994 Photography -- Films and papers -- Determination of dimensional change
JIS K 6259-1:2015 Rubber, vulcanized or thermoplastic -- Determination of ozone resistance -- Part 1: Static and dynamic strain testing

RU-GOST R, denatured collagen

GOST ISO 37-2013 Rubber or thermoplastic. Determination of tensile stress-strain properties
GOST ISO 7743-2013 Rubberorthermoplastic. Determination of compression stress-strain properties
GOST 28075-1989 Vegetable fodder. Method for the determination of crude protein splitting
GOST 12580-1978 Latex films. Method of the determination of elastic and tensile stress-strain properties
GOST 10952-1975 Rubber. Methods for determination of fatigue life under variable sign flexure with rotation
GOST 270-1975 Rubber. Method of the determination elastic and tensile stress-strain properties
GOST 18068-1972 Laminated glued wood. Method of determining linear dimension changes in accordance with relative humidity
GOST 25796.5-1983 Raw clay in the production of clay powders for drilling muds. Method of determination of beneficiation index
GOST R 57750-2017 Polymer composites. Test method for creep properties of adhesives in shear
GOST 20418-1975 Rubber. Methods for the determination of heat generation compression set and fatigue life for repeated compression
GOST R ISO 815-2-2017 Vulcanized rubber and thermoplasts. Determination of compression set. Part 2. Test at low temperatures
GOST 9.029-1974 Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing of resistance to ageing under static deformation of compression
GOST 9.713-1986 Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of predicting the change of properties buring heat ageing

GOSTR, denatured collagen

GOST ISO 37-2020 Rubber and thermoelastoplasts. Determination of tensile stress-strain properties
GOST R ISO 1431-1-2019 Rubber and thermoplastic elastomers. Resistance to ozone cracking. Part 1. Static and dynamic tensile strain testing

KR-KS, denatured collagen

KS M ISO 7743-2022 Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
KS M ISO 7743-2016 Rubber, vulcanized or thermoplastic－Determination of compression stress-strain properties
KS M ISO 22768-2021 Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry(DSC)
KS M ISO 37-2022 Rubber, vulcanized or thermoplastic Determination of tensile stress strain properties
KS M ISO 1431-2-2004 Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Part 2：Dynamic strain test
KS A ISO 3042-2018 Cinematography — Labelling of containers for raw-stock motion-picture films and magnetic films — Minimum information specifications
KS M ISO 815-2-2021 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures
KS A ISO 3042-2018(2023) Cinematography — Labelling of containers for raw-stock motion-picture films and magnetic films — Minimum information specifications
KS M ISO 815-1-2021 Rubber, vulcanized or thermoplastic —Determination of compression set —Part 1: At ambient or elevated temperatures
KS V ISO 19030-1-2018 Ships and marine technology — Measurement of changes in hull and propeller performance — Part 1: General principles

SE-SIS, denatured collagen

SIS SS 16 22 04-1986 Rubber and thermoplastic elastomer - Determination of compression set
SIS SS 16 22 09-1986 Rubber and thermoplastic elastomer - Determination of tension set
SIS SS 16 22 10-1986 Rubber and thermoplastic elastomer - Resistance to ozone cracking - Static strain test
SIS SS-ISO 7743:1992 Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties

Professional Standard - Chemical Industry, denatured collagen

HG/T 4300-2012 Rubber.Measurement of rheological properties.Piston type capillary rheometer methods
HG/T 4806-2015 Rubber shoes.Test methods for outsoles.Compression set
HG/T 2815-1996 Adhesives for footwear heat resistance test method creep method

CZ-CSN, denatured collagen

CSN ON 44 1372-1968
CSN 11 3330-1988 Pumps with protective rubber coa-tings. Basic data
CSN ISO 815:1994 Rubber,vulcanized or thermoplastic;determination of compression set at ambient,elevated or low temperatures
CSN 64 0151-1975 Determination of esistanco to colour hange upon exposure to ight of a xenon lamp of lastic and vulcanized ubber
CSN 49 0181-1986 Plywood. Method of identifying linnar ilimension changes in rclation tu relative air humidity
CSN 91 7824-1980 Testing of floor coverings. Determination of permanent deformation of floor coverings of plastics and rubber

RO-ASRO, denatured collagen

STAS 7911-1989 ELASTOMERS Sampling of raw rubber in bales
STAS 7946/3-1976 RAW NATURAL RUBBER Plasticity retention index
STAS SR ISO 7743+A1:1995 Vulcanized or thermoplastic-rubber Determination of compression stress-strain properties
STAS 8942/3-1984 Foundation ground DETERMINATION OF LINEAR MODULUS OF DEFORMATION BY IN SITU TESTS WITH PLATE
STAS SR ISO 6891:1995 Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics
SR ISO 4665-1:1985 Vulcanized rubber. Resistence to weathering Part 1: Assessment of changes in properties after exposure to natural weathering or artificial light

Taiwan Provincial Standard of the People's Republic of China, denatured collagen

CNS 3560-2007 Method of test for compression set of vulcanized or thermoplastic rubber at ambient, elevated or low temperatures
CNS 3554-2007 Method of test for tension set of rubber, vulcanized or thermoplastic
CNS 10018-2008 Resistance to ozone cracking of rubber,vulcanized or thermoplatic (Methods of test for static and dynamic strain)
CNS 3554-1999 Method of test for tension set of rubber"," vulcanized or thermoplastic

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., denatured collagen

ASHRAE 4066-1997 Energy Performance Analysis of Prototype Electrochromic Windows

Professional Standard - Textile, denatured collagen

FZ/T 51016-2019 Water-based color paste for viscose fiber dope coloring

API - American Petroleum Institute, denatured collagen

API PUBL 26-60011-1975 MUTAGENIC EVALUATION OF RUBBER SOLVENT CHF-32-263
API PUBL 26-60044-1978 MUTAGENICITY EVALUATION OF RAW SHALE (Final Report)
API PUBL 26-60016-1975 MUTAGENIC EVALUATION OF FILTERED RUBBER SOLVENT (CHF-32-263)

PL-PKN, denatured collagen

PN C04291-1965 Rubber. De?ermination= of mechanical properties under compressive or shear s?rains by the Yerzley oscylograph
PN C04234-1956
PN D04251-1988 Plywood Determination of linear diamensions changes after conditioning humid air
PN C04287-1966 Rubber Testing of ?he plastici?y by compre- ssion ?o ?he cons?an? deformation method by plastometer ?ype Continental

British Standards Institution (BSI), denatured collagen

BS ISO 1431-1:2012 Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing
BS ISO 1431-1+A1:2004 Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing
BS ISO 7743:2011 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS ISO 37:2011 Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
BS ISO 815-2:2014 Rubber, vulcanized or thermoplastic. Determination of compression set. At low temperatures
BS ISO 815-2:2009 Rubber, vulcanized or thermoplastic. Determination of compression set. At low temperatures
BS ISO 815-2:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - At low temperatures
BS ISO 4664-3:2021 Rubber, vulcanized or thermoplastic. Determination of dynamic properties. Glass transition temperature (Tg)
BS ISO 815-1:2014 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
BS ISO 815-1:2009 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
BS ISO 815-1:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - At ambient and elevated temperatures
BS 2782-7 Method 740B:1996 Methods of testing plastics. Rheological properties. Polymer dispersions and synthetic rubber latices. Freeze-thaw cycle stability test
BS ISO 2285:2013 Rubber, vulcanized or thermoplastic. Determination of tension set underconstant elongation, and of tension set, elongation and creep underconstant tensile load
BS ISO 7743:2017 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS ISO 37:2017 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
BS EN 13880-4:2003 Hot applied joint sealants - Test method for the determination of heat resistance - Change in penetration value
BS ISO 2930:2017 Tracked Changes. Rubber, raw natural. Determination of plasticity retention index (PRI)
BS ISO 815-2:2019 Rubber, vulcanized or thermoplastic. Determination of compression set - At low temperatures
BS ISO 19030-1:2016 Ships and marine technology. Measurement of changes in hull and propeller performance. General principles
BS ISO 4666-1:2010 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Basic principles
BS EN 15977:2011 Rubber or plastic coated fabrics. Mechanical properties. Determination of the elongation under load and the residual deformation
BS EN 26891:1991 Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics
19/30388641 DC BS ISO 4664-3. Rubber, vulcanized or thermoplastic. Determination of dynamic properties. Part 3. Glass transition temperature (Tg)
BS ISO 815-1:2019 Rubber, vulcanized or thermoplastic. Determination of compression set - At ambient or elevated temperatures
BS ISO 1431-1:2022 Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing
BS ISO 2285:2019 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
18/30374435 DC BS ISO 815-2. Rubber, vulcanized or thermoplastic. Determination of compression set. Part 2. At low temperatures

Indonesia Standards, denatured collagen

SNI 06-4894-1998 Resistance to ozon cracking of vulcanized rubber and thermoplastic rubber (static strain test)
SNI ISO 815-2:2014 Rubber, vulcanized or thermoplastic – Determination of compression set – Part 2: At low temperatures
SNI ISO 37:2010 Rubber vulcanized or thermoplastic - Determination of tensile-strain properties
SNI ISO 1431-1:2012 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing

YU-JUS, denatured collagen

JUS G.S2.138-1985 Rubber, vulcanized. Resistance to ozone cracking. Static strain test
JUS G.S2.127-1985 Rubber, vulcanized. Determination of tensile stress-strain properties
JUS G.S2.658-1988 Plastics and rubber. Determination of changes in colour and variations in properties after exposure to daylight, natural weathering or artificial light

TR-TSE, denatured collagen

TS 1967-1979 RUBBER, VULCANIZED — DETERMINATION OF TENSILE STRESS — STRAIN PROPERTIES

Danish Standards Foundation, denatured collagen

DS/ISO 37:1979 Rubber, vulcanized. Determination of tensile stress-strain properties
DS/ISO 1431-1:1989 Rubber, vulcanized. Resistance to ozone cracking. Part 1: Static strain test
DS/ISO 4665/1:1986 Rubber, vulcanized. Resistance to weathering. Part 1: Assessment of changes in properties after exposure to natural weathering or artificial light
DS/EN 15977:2011 Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation
DS/EN 13880-4:2003 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value
DS/ISO 6891:1993 Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics
DS/EN 26891:1993 Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics

BE-NBN, denatured collagen

NBN-EN 71/3-1989 Safety of toys- Part 3 : Migration of certain elements
NBN T 31-040-1988 Rubber - Determination of dynamic properties of vulcanizates for classification purposes(by forced sinusoidal shear strain)
NBN-ISO 1431-1:1990 Rubber, vulcanized or thermoplastic - Résistance to ozone cracking - Part 1 : Static strain test
NBN-ISO 6891:1992 Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics
NBN-ISO 815:1994 Rubber, vulcanized or thermoplastic. Determination of compression set at ambient, elevated or low temperatures

PT-IPQ, denatured collagen

NP ISO 37:2001 Rubber,vulcanized or thermoplastic Determination of tensile stress-strain properties
NP ISO 2285:1999 Rubber, vulcanized or thermoplastic Determination of tension set at normal and high temperatures

(U.S.) Ford Automotive Standards, denatured collagen

FORD FLTM BU 153-01-2005 RHEOLOGICAL TESTING FOR DETERMINING THE VISCOSITY OF ADHESIVES AND SEALERS
FORD FLTM BI 163-01-2004 RHEOLOGICAL TESTING FOR DETERMINING THE REACTIVITY PROFILE OF HEM FLANGE ADHESIVES
FORD ESF-M99G153-A-2012 ENCAPSULANT - SILICONE DIELECTRIC GEL, THIXOTROPIC ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4G356-A2-2001 SEALANT, THIXOTROPIC TWO COMPONENT SILICONE RUBBER, DISPENSED FOAM (IN PLACE) GASKET

AENOR, denatured collagen

UNE-ISO 37:2013 Rubber, vulcanised or thermoplastic. Determination of tensile stress-strain properties
UNE-ISO 815-2:2011 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures
UNE-ISO 815-1:2011 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures
UNE 104281-1-1:1986 PURE AND MODIFIED BITUMINOUS MATERIALS. BITUMINOUS RAW MATERIALS AND MASTICS. TESTING METHODS. SAMPLING
UNE-ISO 2285:2009 Rubber, vulcanised or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
UNE-EN 15977:2011 Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation
UNE 104281-1-7:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS RAW MATERIALS AND MASTICS. TESTING METHODS. ASH CONTENT
UNE-EN 26891:1992 TIMBER STRUCTURES. JOINTS MADE WITH MECHANICAL FASTENERS. GENERAL PRINCIPLES FOR THE DETERMINATION OF STRENGTH AND DEFORMATION CHARACTERISTICS. (ISO 6891:1983)

The American Road & Transportation Builders Association, denatured collagen

AASHTO T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)

AT-ON, denatured collagen

ONORM B 3453-1953
ONORM EN 26891-1991 Timber structures - Joints made with mechanical fasteners General principles for the determination ofstrength and deformation characteristics (ISO 6891:1983)
ONORM EN 26922-1993 Timber structures - Joints made with mechanical fasteners General principles for the determination ofstrength and deformation characteristics (ISO 6891:1983)

Standard Association of Australia （SAA）, denatured collagen

AS 1683.25:2001 Methods of test for rubber - Determination of the resistance of vulcanized or thermoplastic rubbers to ozone cracking - Dynamic strain test
AS 1683.24:2001 Methods of test for rubber - Determination of the resistance of vulcanized or thermoplastic rubbers to ozone cracking - Static strain test
AS 1683.9:1992 Methods of test for elastomers - Rubber, vulcanized or thermoplastic - Determination of tension set at normal and high temperatures

ES-UNE, denatured collagen

UNE-ISO 7743:2016 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
UNE-ISO 2285:2019 Rubber, vulcanised or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
UNE-ISO 1431-1:2017 Rubber, vulcanised or thermoplastic. Resistance to ozone cracking. Part 1: Static and dynamic strain testing

Professional Standard - Petroleum, denatured collagen

SY/T 6282-1997 Analytical approach of fluid physical property for heavy-oil reservoirs-Measurements of porous flow rheological characterization for crude oil

Society of Automotive Engineers (SAE), denatured collagen

SAE AMS3307E-2021 Elastomer: Rubber, Silicone (VMQ) Non-Oil-Resistant Low Compression Set 65 - 75 Shore A Hardness
SAE AMS3307C-1991 Rubber, Silicone (VMQ) Low Compression Set, Non-Oil-Resistant, 65-75
SAE AMS-R-83248A-2005 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant
SAE AMS-R-83248-1999 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant
SAE AMS3373/1-1981 COMPOUND, SILICONE RUBBER, INSULATING AND SEALING Oil and Reversion Resistant, Low Viscosity, Room Temperature Cure
SAE AMS3373/2-1981 COMPOUND, SILICONE RUBBER, INSULATING AND SEALING Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure
SAE AMS-R-83248/1A-2015 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant (O-Rings, Class 1, 75 Hardness)
SAE AMS3357H-2021 Elastomer: Silicone Rubber (VMQ) Aircraft Piston Engine Oil Resistant Compression Set Resistant 65 - 75 Type A Hardness

European Committee for Standardization (CEN), denatured collagen

EN ISO 9047:1997 (WITHDRAWN) Building Construction - Sealants - Determination of Adhesion/Cohesion Properties at Variable Temperatures ISO 9047: 1989
EN 27389:1990 Building construction; jointing products; determination of elastic recovery (ISO 7389:1987)
EN ISO 9047:2003/AC:2009 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001/Cor 1:2009)
EN 26891:1991 Timber Structures - Joints Made with Mechanical Fasteners - General Principles for the Determination of Strength and Deformation Characteristics
EN 15977:2011 Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation

PK-PSQCA, denatured collagen

PS 353-1981 METHOD FOR DETERMINATION OF TENSILE TRESS-STRAIN PROPERTIES OF RUBBER (FIRST REVISION)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, denatured collagen

GB/T 33095.1-2016 Rubber, unvulcanized—Measurement of rheological properties using rotorless shear rheometer— Part 1: Frequency sweep
GB/T 35495-2017 Determination of changes in cohesion for elastic sealants after dynamic artificial weathering
GB/T 1687.1-2016 Rubber, vulcanized—Determination of temperature rise and resistance to fatigue in flexometer testing—Part 1: Basic principles

Professional Standard - Nuclear Industry, denatured collagen

EJ/T 20047-2014 Activity concentration monitoring for alpha radioactive aerosol in the workplace.The decay method

Professional Standard - Aviation, denatured collagen

HB 6686-1992 Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)
HB 6685-1992 Test Method for Compression Shear Creep Properties of Adhesives (Metal to Metal)

国家质量监督检验检疫总局, denatured collagen

SN/T 4799-2017 Detection method for animal tuberculosis pathogens Denaturing high performance liquid chromatography

IN-BIS, denatured collagen

IS 3400 Pt.1-1977

ESDU - Engineering Sciences Data Unit, denatured collagen

SPB-M2-1-2007 Interfacial and rheological properties of asphaltenes studied by atomic force microscopy.
SPB-M6-1-2010 Apr.08: Interfacial and Rheological Properties of Asphaltenes Investigated using AFM
SPB-M14-1-2010 Sept.10: Interactions and rheological properties of Asphaltenes studied by Atomic Force Microscopy
ESDU 79016-1979 INELASTIC SHEAR STRESSES AND STRAINS IN THE ADHESIVES BONDING LAP JOINTS LOADED IN TENSION OR SHEAR

ES-AENOR, denatured collagen

UNE 53-558 Pt.2-1991 Rubber. Vulcanized or thermoplastic. Resistance to ozone cracking. Part 2: Dynamic strain test
UNE 53-623 Pt.6-1989

United States Navy, denatured collagen

NAVY MIL-DTL-22050 E-2004 GASKET AND PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM, AND AIR AT MODERATELY HIGH TEMPERATURES

Instrument Society of America (ISA), denatured collagen

ISA 37.5-1982 Specifications and Tests for Strain Gage Linear Accelerator Transducers

SAE - SAE International, denatured collagen

SAE AMS-R-83248/2A-2015 Rubber@ Fluorocarbon Elastomer@ High Temperature@ Fluid and Compression Set Resistant (O-Rings@ Class 2@ 90 Hardness)

Lithuanian Standards Office , denatured collagen

LST EN 15977-2011 Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation
LST EN 13880-4-2004 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value
LST EN 26891-2000 Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983)