ZH
RU
ES
Cover seam strength
Cover seam strength, Total:212 items.
In the international standard classification, Cover seam strength involves: Non-textile floor coverings, Footwear, Products of the textile industry, Sacks. Bags, Mechanical testing, Leather technology, Sports equipment and facilities, Structures of buildings, Pipeline components and pipelines, Birth control. Mechanical contraceptives, Plastics, Medical equipment, Construction materials, Reinforced plastics, Electronic components in general, Wood-based panels, Adhesives, Electronic component assemblies, Materials for the reinforcement of composites, Road engineering, Waxes, bituminous materials and other petroleum products, Components for aerospace construction, Rubber, Elements of buildings, Materials for aerospace construction, Paper and board, Paper products, Burners. Boilers, Cutting tools.
European Committee for Standardization (CEN), Cover seam strength
- EN 684:1995 Resilient floor coverings - Determination of seam strength
- prEN 684-1992 Resilient floorcoverings; determination of seam strength
- EN 13572:2001 Footwear - Test Methods for Uppers, Lining and Insocks - Seam Strength
- EN 12228:2013 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
- EN 12228:2002 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
- prEN 846-2-1992 Methods of tests for ancillary components for masonry; part 2: determination of bond strength of bed joint reinforcement in mortar joints
- EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
- EN 846-2:2000 Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
- PD CEN/TS 12697-51:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test
- CEN/TS 12697-51:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test
- EN 12697-46:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests
- EN 13408:2002 Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength
国家市场监督管理总局、中国国家标准化管理委员会, Cover seam strength
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Cover seam strength
Korean Agency for Technology and Standards (KATS), Cover seam strength
- KS K 0745-2002 Test method for seam strength of sewn geotextiles
- KS K 0347-2012 Test method for bursting strength and elongation of seams of knit or woven stretch fabrics
- KS T 1308-2000 Testing method of sew-up strength for 1arge-sized paper bag
- KS T 1308-2015 Testing method of sew-up strength for 1arge-sized paper bag
- KS T 1308-2021 Testing method of sew-up strength for large-sized paper bag
- KS A 1016-1995 Testing method of sew-up strength for large-sized paper bag
- KS M ISO 17697:2019 Footwear — Test methods for uppers, lining and insocks — Seam strength
- KS K ISO 10321:2011 Geosynthetics－Tensile test for joints/seams by wide-width strip method
- KS K ISO 10321:2016 Geosynthetics－Tensile test for joints/seams by wide-width strip method
- KS F 2386-2013(2018) Standard test method for adhesive strength between pavement layers
- KS C IEC 62137-1-1:2009 Surface mounting technology－Environmental and endurance test methods for surface mount solder joint－Part 1－1：Pull strength test
- KS C IEC 62137-1-2:2009 Surface mounting technology－Environmental and endurance test methods for surface mount solder joint－Part 1-2: Shear strength test
TR-TSE, Cover seam strength
- TS 1619-1974 SEAM BREAKING STRENGTH OF WOVEN TEXTILE FABRICS
Taiwan Provincial Standard of the People's Republic of China, Cover seam strength
- CNS 10634-1983 Method of Test for Seam Shrength of Large-Sized Paper Bag
PL-PKN, Cover seam strength
- PN P22132-1965 Shoe upper chrome leathers Determination of stitch strength
Japanese Industrial Standards Committee (JISC), Cover seam strength
- JIS Z 0215:1996 Testing method of stitch strength for sewn kraft paper sacks
- JIS C 62137-1-1:2010 Surface mounting technology -- Environmental and endurance test methods for surface mount solder joint -- Part 1-1: Pull strength test
- JIS C 62137-1-2:2010 Surface mounting technology -- Environmental and endurance test methods for surface mount solder joint -- Part 1-2: Shear strength test
- JIS K 7019:1999 Fiber-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus and minus 45 degree SIGN tension test method
Indonesia Standards, Cover seam strength
- SNI 08-4648-1998 Test method for seam strength of knitted fabrics by bursting strength tester (diaphragm method )
- SNI ISO 17697:2011 Footwear - Test methods for uppers, lining and insocks - Seam strength
- SNI 08-6329-2000 Test methods for adhesive strength of backing of textile floor covering
ZA-SANS, Cover seam strength
- SANS 6132:1989 Wet stitch tear strength of leather welting
- SANS 6118:1988 Spigot holding strength of ladies' plastics moulded heel top-pieces
- SANS 5633:1968 Determination of wet stitch tear strength (leather, leatherboard, fibreboard)
Association Francaise de Normalisation, Cover seam strength
- NF EN 12773:2000 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance du point de couture
- NF G62-105*NF EN ISO 17697:2016 Footwear - Test methods for uppers, lining and insocks - Seam strength
- NF G52-005:2007 Leather - Physical and mechanical tests - Measurement of stitch tear resistance.
- NF P90-134*NF EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
- NF EN 12317-1:1999 Feuilles souples d'étanchéité - Partie 1 : feuilles d'étanchéité de toiture bitimineuses - Détermination de la résistance au cisaillement des joints
- NF P90-122*NF EN 12228:2013 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
- NF EN 15307:2015 Colles pour cuir et matériaux de la chaussure - Collages tige-semelle - Exigences minimales en matière de résistance
- NF C93-704-1-1*NF EN 62137-1-1:2014 Surface-mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1 : pull strength test
- NF C93-704-1-2*NF EN 62137-1-2:2014 Surface-mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2 : shear strength test
- NF P98-818-46:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: low temperature cracking and properties by uniaxial tension tests
- NF P19-124*NF EN 1741:1998 Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lighweight aggregate concrete with open structure.
American Society for Testing and Materials (ASTM), Cover seam strength
- ASTM D4884/D4884M-22 Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
- ASTM D4884/D4884M-14 Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
- ASTM D4884/D4884M-14a Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
- ASTM D4884-96(2003) Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
- ASTM D4884-96 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
- ASTM D4884-09 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
- ASTM D4884-12 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
- ASTM D4786-00 Standard Test Method for Stitch Tear Strength, Single Hole
- ASTM D4786-00(2016) Standard Test Method for Stitch Tear Strength, Single Hole
- ASTM D4786-00(2020) Standard Test Method for Stitch Tear Strength, Single Hole
- ASTM D4786-00(2005) Standard Test Method for Stitch Tear Strength, Single Hole
- ASTM D4786-00(2010) Standard Test Method for Stitch Tear Strength, Single Hole
- ASTM D4884-09e1 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
- ASTM D4884-13 Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
- ASTM D4705-00(2010) Standard Test Method for Stitch Tear Strength of Leather, Double Hole
- ASTM D6644-01(2021) Standard Test Method for Tension Strength of Sew-Through Flange Buttons
- ASTM D4705-18(2023) Standard Test Method for Stitch Tear Strength of Leather, Double Hole
- ASTM D4705-12 Standard Test Method for Stitch Tear Strength of Leather, Double Hole
- ASTM D4705-13 Standard Test Method for Stitch Tear Strength of Leather, Double Hole
- ASTM A714-99(2003) Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
- ASTM A714-99 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
- ASTM D6644-01 Standard Test Method for Tension Strength of Sew-Through Flange Buttons
- ASTM A618-74 Standard Specification for Hot-Formed Welded And Seamless High-Strength Low-Alloy Structural Tubing
- ASTM D4705-00(2005) Standard Test Method for Stitch Tear Strength of Leather, Double Hole
- ASTM A618/A618M-21 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM A714-99(2009)e1 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
- ASTM F1921-98 Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
- ASTM F1921-98(2004) Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
- ASTM A618-01 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM A618-99 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM A618/A618M-04 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM A618/A618M-04(2010) Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM A618/A618M-04(2015) Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM D5045-14 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
- ASTM D7291/D7291M-22 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
- ASTM A847/A847M-05 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
- ASTM A847/A847M-12 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
- ASTM A847/A847M-11 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
- ASTM A847/A847M-14 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
- ASTM D4796-17 Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
- ASTM B891-98e1 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins
- ASTM B891/B891M-19 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer
- ASTM A847/A847M-21 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
YU-JUS, Cover seam strength
RO-ASRO, Cover seam strength
- STAS 7002-1964
- STAS 2161-1987 PANKT, Ddmniiuilion of slicarin^ slri'iiL?th ol j?lue joinl
- STAS 11002-1977 PLYWOOD AND OTHER VERNEERED WOODEN PRODUCTS Determination of gluing tensile strength perpendicularly on plale surface
KR-KS, Cover seam strength
Danish Standards Foundation, Cover seam strength
- DS/EN 13572:2002 Footwear - Test methods for uppers, lining and insocks - Seam strength
- DS/EN 12228:2013 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
- DS/EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
- DS/EN 15307:2007 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
- DS/EN 12317-2:2010 Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
- DS/EN 1739:2007 Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
Lithuanian Standards Office , Cover seam strength
- LST EN 13572-2002 Footwear - Test methods for uppers, lining and insocks - Seam strength
- LST EN 12228-2003 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
- LST EN 13864-2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
- LST EN 15307-2007 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
- LST EN 12317-2-2010 Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
- LST EN 1739-2007 Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
RU-GOST R, Cover seam strength
- GOST R ISO 17697-2014 Footwear. Test methods for uppers, lining and insocks. Seam strength
- GOST R 57264-2016 Fittings for horizontal joints of masonry. Method for adhesive strength determining
- GOST 23351-1978 Textile terry cloth and piece goods. Method for determination of fixhere strength of loop threads
- GOST R 57745-2017 Polymer composites. Determination of plane shear strength of laminates by short-beam method
- GOST R 56655-2015 Polymer composites. Method for determination of in-plane shear strength of pultruded glass-reinforced plastic rods
- GOST R 56809-2015 Polymer composites. Method for determination of compressive strength parallel to the plane of sandwich constructions
- GOST R 56786-2015 Polymer composites. Method for determination of shear strength in the plane of the reinforcement
- GOST ISO 36-2013 Rubber or thermoplastic. Determination of adhesion to textile fabrics
- GOST 18944-1973 Spherical end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions
German Institute for Standardization, Cover seam strength
- DIN EN ISO 17697:2016-10 Footwear - Test methods for uppers, lining and insocks - Seam strength (ISO 17697:2016); German version EN ISO 17697:2016
- DIN EN 12228:2013-12 Surfaces for sports areas - Determination of joint strength of synthetic surfaces; German version EN 12228:2013
- DIN EN 13864:2004-09 Surfaces for sports areas - Determination of tensile strength of synthetic yarns; German version EN 13864:2004
- DIN EN 12228:2002 Surfaces for sports areas - Determination of joint strength of synthetic surfaces; German version EN 12228:2002
- DIN EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns; German version EN 13864:2004
- DIN EN ISO 14130:1998 Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997
- DIN EN 846-2:2000 Methods of tests for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints; German version EN 846-2:2000
- DIN 50002-2:2021-08 Adhesive bondings in electronic applications - Bonding strength at surfaces - Part 2: Shear test
- DIN 50002-1:2020-03 Adhesive bondings in electronic applications - Bonding strength on surfaces - Part 1: Tensile test
- DIN 50002-2:2021 Adhesive bondings in electronic applications - Bonding strength at surfaces - Part 2: Shear test
- DIN 52376:2016-07 Testing of plywood - Determination of compression strength parallel to the surfaces
- DIN EN 15307:2015-04 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements; German version EN 15307:2014
- DIN EN 62137-1-1:2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test (IEC 62137-1-1:2007); German version EN 62137-1-1:2007
- DIN 52376:1978 Testing of plywood; determination of compression strength parallel to the surfaces
- DIN 52376:2016 Testing of plywood - Determination of compression strength parallel to the surfaces
- DIN 52461:2015 Testing of sealing compounds in building construction - Rain strength of just applied sprayable jointing products
- DIN 52461:2000 Testing of sealing compounds in building construction - Rain strength of just applied sprayable jointing products
- DIN EN 62137-1-2:2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test (IEC 62137-1-2:2007); German version EN 62137-1-2:2007
- DIN SPEC 52022:2014 Bitumen and bituminous binders - Determination of fixation strength of polymer modified binders for surface treatments
- DIN V 52022:2005 Bitumen and bituminous binders - Determination of fixation strength of polymer modified binders for surface treatments
- DIN CEN/TS 12697-51:2017-10*DIN SPEC 18099:2017-10 Bituminous mixtures - Test methods - Part 51: Surface shear strength test; German version CEN/TS 12697-51:2017
- DIN EN 12228:2013 Surfaces for sports areas - Determination of joint strength of synthetic surfaces; German version EN 12228:2013
- DIN 53255:1964 Testing of wood adhesives and glued wood joints; shear and delamination tests for determining the failing strength of plywood bonds (plywood and coreboard)
- DIN 18555-9:1999 Testing of mortars containing mineral binders - Part 9: Hardened mortars; determination of the mortar compressive strength in the bed joint
- DIN EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ˝ 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997
ES-UNE, Cover seam strength
- UNE-EN ISO 17697:2016 Footwear - Test methods for uppers, lining and insocks - Seam strength (ISO 17697:2016)
AENOR, Cover seam strength
- UNE-EN 12228:2014 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
- UNE-EN 13864:2006 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
- UNE-EN 15307:2015 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
- UNE-EN 12317-2:2011 Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
- UNE-EN 1739:2008 Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
Professional Standard - Light Industry, Cover seam strength
- QB/T 4872-2015 Test method of artificial leather and synthetic leather.Test method of seam strength
ESDU - Engineering Sciences Data Unit, Cover seam strength
- ESDU 92017-1992 Fatigue strength of cruciform and other fillet welded joints in aluminium alloys.
International Organization for Standardization (ISO), Cover seam strength
- ISO 12579:2007 Timber structures - Glued laminated timber - Method of test for shear strength of glue lines
- ISO/DTS 23148 Additional lubricants for male synthetic condoms — Effect on condom strength
- ISO/CD 19350:2023 Recycled carbon fibre — Determination of tensile strength distribution and interfacial shear strength of single filament embedded in matrix polymer
- ISO/FDIS 7972 Adhesives — Absorption of water into an adhesive layer using an open-faced specimen and determination of shear strength by secondary bonding
IN-BIS, Cover seam strength
Society of Automotive Engineers (SAE), Cover seam strength
- SAE AS954A-1980 REVERSIBLE RATCHET HANDLES AND SOCKETS FLEXIBLE SOCKETS, BOX WRENCHES, TORQUE ADAPTERS, 12-POINT, HIGH STRENGTH, THIN WALL
- SAE MA4535-2004 Wrenches, Box and Open End Combination Twelve Point, High Strength, Thin Wall, Metric
- SAE AS22759/182A-2019 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, NICKEL-COATED HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLTS ROHS
- SAE AS22759/181A-2019 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLTS ROHS
- SAE AS22759/189A-2019 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER-COATED HIGH STRNGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLTS ROHS
- SAE AS22759/190A-2019 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL-COATED HIGH STRNGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLTS ROHS
WRC - Welding Research Council, Cover seam strength
- BULLETIN 213-1976 WELDABILITY OF NIOBIUM CONTAINING HIGH STRENGTH LOW ALLOY STEEL; A REVIEW OF THE STRUCTURE AND PROPERTIES OF WELDS IN COLUMBIUM OR VANADIUM CONTAINING HIGH STRENGTH LOW ALLOY STEELS
GM Europe, Cover seam strength
- GME GMI 60347-2012 Bond Strength of Dielectrically Produced Welding Seams of Assembly Components in Body Interior Equipment (English/German; This standard may be applied only for current projects incl. 4403 (“Junior”). It is Superceded for all future projects and replaced b
工业和信息化部, Cover seam strength
- QB/T 4874-2015 Artificial Leather Test Methods for Synthetic Leather Determination of Fatigue Strength of Seams
American National Standards Institute （ANSI), Cover seam strength
British Standards Institution (BSI), Cover seam strength
- BS 3531-23.1:1991 Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness
- BS EN 12228:2003 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
- BS EN 12228:2002 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
- BS EN 12228:2013 Surfaces for sports areas. Determination of joint strength of synthetic surfaces
- BS EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
- BS EN 62137-1-1:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Pull strength test
- BS EN 62137-1-2:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Shear strength test
- PD ISO/TR 18124:2006 Plastics piping systems. Multilayer M (metal) pipes. Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
- BS 4L 56:1986 Specification for tube of aluminium-21/4% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness)
- BS 2TA 12:1974 Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
- BS 2TA 13:1974 Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
- 2TA 12-1974 Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
- BS 3TA 28:2009+A1:2015 Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm)
- BS 3TA 13:2009 Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
- BS 3TA 28:2009 Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm)
- BS 3TA 12:2009 Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
CZ-CSN, Cover seam strength
IPC - Association Connecting Electronics Industries, Cover seam strength
Standard Association of Australia （SAA）, Cover seam strength
- AS/NZS 4266.6(Int):2001 Reconstituted wood-based panels - Methods of test - Tensile strength perpendicular to the plane of the panel (Internal bond strength)
- AS/NZS 4266.6:2004 Reconstituted wood-based panels - Methods of test - Tensile strength perpendicular to the plane of the panel (internal bond strength)
- AS 4693.3:2004 Surfaces for sports areas - Methods of test - Determination of joint strength of synthetic surfaces
未注明发布机构, Cover seam strength
- BS 5131-5.13:1980(1999) Methods of test for Footwear and footwear materials — Part 5 : Testing of complete footwear — Section 5.13 Measurement of the strength of stitched seams in upper and lining materials CEDIREER) REP TY HS PERNAL :
- SAE AS22759/182A-2015 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, NICKEL-COATED HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLTS ROHS
- SAE AS22759/189A-2015 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER-COATED HIGH STRNGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLTS ROHS
SAE - SAE International, Cover seam strength
- SAE MA4535A-2013 Wrenches@ Box and Open End Combination Twelve Point@ High Strength@ Thin Wall@ Metric
- SAE AS22759/190-2010 WIRE@ ELECTRICAL@ POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED@ SMOOTH SURFACE@ NORMAL WEIGHT@ NICKELCOATED HIGH STRNGTH OR ULTRA HIGH STRENGTH COPPER ALLOY@ 260 DEGREE C@ 600 VOLTS
- SAE AS22759/181A-2015 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLTS ROHS
- SAE AS22759/190A-2015 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL-COATED HIGH STRNGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLTS ROHS
API - American Petroleum Institute, Cover seam strength
- API STD 5AX-1968 SPECIFICATION FOR HIGH-STRENGTH CASING AND TUBING (Seventh Edition; Incorporating Supplement: April 1969)
- API BULL 5C4-1972 BULLETIN ON ROUND THREAD CASING JOINT STRENGTH WITH COMBINED INTERNAL PRESSURE AND BENDING FIRST EDITION
- API SPEC 5AC-1987 SPECIFICATION FOR RESTRICTED YIELD STRENGTH CASING AND TUBING (COMBINED WITH SPEC 5A@ 5AX@ AND 5AQ INTO SPEC 5CT-88)
- API SPEC 5AX-1982 SPECIFICATION for HIGH-STRENGTH CASING@ TUBING@ AND DRILL PIPE (Twelfth Edition; Incorporates Supplement 1: April 1983)
- API SPEC 5AX-1987 SPECIFICATION FOR HIGH- STRENGTH CASING@ TUBING@ AND DRILL PIPE (COMBINED WITH SPEC 5A INTO SPEC 5D-88 AND COMBINED WITH SPEC 5A@ 5AC@ AND 5AQ INTO SPEC 5CT-88)
HU-MSZT, Cover seam strength
IT-UNI, Cover seam strength
GOSTR, Cover seam strength
- GOST R 57864-2017 Polymer composites. Test method for determination of through-thickness flatwise tensile strength and elastic modulus
European Committee for Electrotechnical Standardization（CENELEC）, Cover seam strength
- EN 62137-1-1:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test
- EN 62137-1-2:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test
International Electrotechnical Commission (IEC), Cover seam strength
- IEC 62137-1-2:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test
- IEC 62137-1-1:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test
Professional Standard - Aviation, Cover seam strength
- HB 779-1973 1-8 grades of precision with carbide sleeve measuring head double-headed smooth plug gauge D>30-80mm
National Aeronautics and Space Administration (NASA), Cover seam strength
- NASA NACA-TN-1553-1948 Compressive strength of 24S-T aluminum-alloy flat panels with longitudinal formed hat-section stiffeners having four ratios of stiffener thickness to skin thickness