ZH
RU
ES

Three-point hardness test method

Three-point hardness test method, Total:500 items.

In the international standard classification, Three-point hardness test method involves: Road vehicle systems, Rubber and plastics products, Paper and board, Linear and angular measurements, Plastics, Earthworks. Excavations. Foundation construction. Underground works, Inorganic chemicals, Cellular materials, Testing of metals, Paper products, Construction materials, Wood, sawlogs and sawn timber, Ferrous metals, Jewellery, Products of the textile industry, Welding, brazing and soldering, Rubber, Surface treatment and coating, Electrical accessories, Organic chemicals, Reinforced plastics, Cutting tools, Non-ferrous metals, Glass, Lubricants, industrial oils and related products, Inks. Printing inks, Products of the chemical industry, Seals, glands, Ceramics, Paints and varnishes, Audio, video and audiovisual engineering, Fuels, Insulating materials, Protection against fire, Electronic display devices, Powder metallurgy, Soil quality. Pedology, Metalliferous minerals, Mining and quarrying, Pipeline components and pipelines, Furniture, Computer graphics, Mechanical testing, Tobacco, tobacco products and related equipment, Building accessories, Footwear, Iron and steel products, Geology. Meteorology. Hydrology, Road engineering, Characteristics and design of machines, apparatus, equipment, Textile fibres, Waxes, bituminous materials and other petroleum products, Petroleum, petroleum products and natural gas handling equipment, Equipment for processing of minerals, Leather technology, Non-destructive testing, Raw materials for rubber and plastics, Materials for the reinforcement of composites.

Society of Automotive Engineers (SAE), Three-point hardness test method

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
SAE J949-2003 Test Method for Determining Stiffness (Modulus of Bending) of Interior Trim Materials and Substrates

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three-point hardness test method

GB/T 33099-2016 Test methods of stiffness for dipped reinforcing material—Three-point bending

CU-NC, Three-point hardness test method

NC 04-63-1985 Materials Testing. Welded Joints Methods for Hardness Determination
NC 04-78-1987 Materials Testing. Determination of Superficially Hardened Layer Depth. Testing Methods
NC 41-46-1987 Leather. Determination of Starching Flexural Strength by Means of Bally Flexometer Testing Method
NC 43-31-1987 Natural and Artificial Wood Industry. Determination of Static Hardness. Testing Method
NC 40-105-1986 Textiles. Methods for Determining Color Hardness. Detection and Valuation of Photocromism Testing Method

British Standards Institution (BSI), Three-point hardness test method

BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS 3730-3:1982 Assessment of departures from roundness - Methods for determining departures from roundness using two- and three-point measurement
BS ISO 11093-6:2007 Paper and board - Testing of cores - Determination of bending strength by the three-point method
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS EN ISO 14271:2017 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
BS ISO 5628:2019 Tracked Changes. Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS 3900-E12.2:2000 Methods of test for paints - Determination of Knoop hardness by measurement of the indentation depth
BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS EN ISO 6507-1:2018 Tracked Changes. Metallic materials. Vickers hardness test. Test method
BS EN ISO 4545-1:2018 Tracked Changes. Metallic materials. Knoop hardness test. Test method
BS EN ISO 6508-1:2016 Tracked Changes. Metallic materials. Rockwell hardness test. Test method
BS IEC 62715-6-3:2020 Flexible display devices - Mechanical test methods. Impact and hardness tests
BS EN 14205:2003 Natural stone test methods - Determination of Knoop hardness
BS 3900-E12.1:2000 Methods of test for paints - Determination of Knoop hardness by measurement of the indentation length using a microscope
BS 2782-10 Method 1001:1977 Methods of testing plastics - Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
19/30396879 DC BS EN 15685. Building hardware. Requirements and test methods. Multipoint locks, latches and locking plates. Characteristics and test methods
BS EN 13892-6:2002 Methods of test for screed materials - Determination of surface hardness
22/30445364 DC BS EN ISO 4545-1. Metallic materials. Knoop hardness test - Part 1. Test method
BS 903-A26:1995 Physical testing of rubber - Method for determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS 3900-E19:1999 Methods of test for paints - Determination of film hardness by pencil test
19/30388218 DC BS EN 1534. Wood flooring. Determination of resistance to indentation (Brinell). Test method
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
PD CEN ISO/TR 21555:2020 Paints and varnishes. Overview of test methods on hardness and wear resistance of coatings
BS EN 1015-11:2019 Methods of test for mortar for masonry - Determination of flexural and compressive strength of hardened mortar
BS 7442 Sec.3.2:1991 Rubber or plastics covered rollers. Method of test. Determination of Shore hardness

CZ-CSN, Three-point hardness test method

CSN 50 0398-1977 Paperboard testing.Determination of speci- fic stiffness of paper- board by three points beam test
CSN 99 4442-1989 Indenters for hardness testing machines Methods of verification
CSN 22 4020-1981 Testing of the hardness by sand blasting method
CSN 73 1373-1981 Testing of concrete by hardness testing methods
CSN 50 0358-1988 Paper and paperboard testing. Paper and paperboard stiffness determi- nation byatensometric two points method
CSN 05 1313-1978 Weldahiliiy defini?ion and assessing. Wldrd joiiit hardness lest.
CSN 50 0356-1961 Paper testing methods —Stiifness of páper
CSN 05 1134-1987 Vickers hardncss test of welded joints of bars for concrete rcinforcement
CSN 25 0270-1985 Rockwell hardness testing machines, scales N and I. Technical requirements. Methods of verification.
CSN 25 8149-1988 Thermometers for testing of petroleum products. Determination of flash point. Pensky Martens closed cup method

Korean Agency for Technology and Standards (KATS), Three-point hardness test method

KS B ISO 4292:2014 Methods for the assessment of departure from roundness — Measurement by two-and three-point methods
KS B ISO 4292:2004 Methods for the assessment of departure from roundness-Measurement by two-and three-point methods
KS F 2325-2002 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2325-1982 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS B 0807-2009 Method of shore hardness test
KS F 2212-2004 Method of hardness test for wood
KS F 2212-1999 Method of hardness test for wood
KS F 2212-1985 Method of hardness test for wood
KS K 0538-2017 Test method for stiffness of fabrics：Heart loop test
KS K 0538-1982 Test method for stiffness of fabrics：Heart loop test
KS M ISO 11093-6:2006 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS B 0800-2001 Test methods for Vickers hardness at elevated temperatures
KS B 0826-2001 Destructive tests on welds in metallic materials-Hardness testing-Part 1:Hardness test on arc welded joints
KS M 6784-1994 Hardness testing methods for vulcanized rubber
KS M 6784-1999 Hardness testing methods for vulcanized rubber
KS B 0826-1985 Destructive tests on welds in metallic materials-Hardness testing-Part 1:Hardness test on arc welded joints
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS F 2325-2002(2017) Testing method for flexural strength of soil－cement using simple beam with third point loading
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M 3712-2002 TESTING METHOD FOR APPARENT INTERLAMINAR SHEAR STRENGTH OF CARBON FIBER REINFORCED PLASTICS BY THREE POINT LOADING METHOD
KS M 3712-1992(1997) TESTING METHOD FOR APPARENT INTERLAMINAR SHEAR STRENGTH OF CARBON FIBER REINFORCED PLASTICS BY THREE POINT LOADING METHOD
KS F 2325-2002(2022) Testing method for flexural strength of soil－cement using simple beam with third point loading
KS B 0805-2000 Metallic materials - Test method of brinell hardness
KS B 0806-2000 Metallic materials - Test method of rockwell hardness
KS B 0805-1983 Metallic materials - Test method of brinell hardness
KS F 2408-1995 Method of test for flexural strength of concrete(Using simple beam with third-point loading)
KS B 0811-2003 Metallic materials－Vickers hardness test－Part 1：Test method
KS L 1208-2005 TESTING METHOD FOR KNOOP INDENTATION HARDNESS OF CERAMIC WHITEWARES
KS B 0800-2001(2016) Test methods for Vickers hardness at elevated temperatures
KS B 0811-1983 Metallic materials－Vickers hardness test－Part 1：Test method
KS B 0893-2006 Testing method of maximum hardness in weld heat-affected zone
KS B 0893-2016 Testing method of maximum hardness in weld heat-affected zone
KS M 3043-1990(2001) TESTING METHODS FOR DUROMETER HARDNESS OF PLASTICS
KS M 3043-1985 TESTING METHODS FOR DUROMETER HARDNESS OF PLASTICS
KS B 0893-1985 Testing method of maximum hardness in weld heat-affected zone
KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS D ISO 4518:2012 Metallic coatings-Measurement of coating thickness-Profilometric method
KS M 3387-2004 Testing method for Barcol hardness of glass fiber reinforced plastics
KS M 6784-2014 Hardness testing methods for rubber, vulcanized or thermoplastic
KS L 5112-2022 Test method for fineness of hydraulic cement by the 45 mm sieve
KS L ISO 9385-2010(2020) Testing method for knoop indentation hardness of glass and glass-ceramics
KS L 2102-2000 Testing method for knoop indentation hardness of glass and glass-ceramics
KS L 2102-1980 Testing method for knoop indentation hardness of glass and glass-ceramics
KS B 4919-1995(2010) Self-centering manually-operated chucks for machine tools-acceptance test specifications(geometrical tests)
KS M 2256-2007(2017) Testing method for solubility of bituminous materials in trichloroethane
KS D 0269-2020 Potentiostatic polarization test method for determination of critical pitting temperature for stainless steels
KS C IEC 60695-2-13:2017 Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignition temperature(GWIT) test method for materials
KS F 2478-2013(2018) Test method measuring changes in height of cylindrical specimens from hydraulic-cement mortar
KS L 5112-2017 Standard testing method for fineness of hydraulic cement by the 45 m sieve

AT-ON, Three-point hardness test method

ONORM ISO 4292:1988 Methodsfor the assessment ofdeparture from roundness; measurement by two- and three-point methods
ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)

International Organization for Standardization (ISO), Three-point hardness test method

ISO 4292:1985 Methods for the assessment of departure from roundness; Measurement by two- and three-point methods
ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
ISO 11093-6:2005 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method
ISO 11093-6:1996 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending

American National Standards Institute （ANSI), Three-point hardness test method

ANSI/ASTM D6777:2002 Test Method for Relative Rigidity of Poly(Vinyl Chloride) (PVC) Siding
ANSI/ASTM E92:1982 Test Method for Vickers Hardness of Metallic Materials
ANSI/ASTM E10:2001 Test Method for Brinell Hardness of Metallic Materials
ANSI/ASTM D3447:2000 Test Method for Purity of Trichlorotrifluoroethane
ANSI/ASTM D3444:2000 Test Method for Total Acid Number of Tricholorotriflourethane
ANSI/ASTM E103:1984 Method for Rapid Indentation Hardness Testing of Metallic Materials
ANSI/ASTM E1842:1996 Test Method for Macro-Rockwell Hardness Testing of Metallic Materials
ANSI/ASTM C886:2010 Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ANSI/ASTM E646:2000 Test Method for Tensile Strain-Hardening Exponents (N-Values) of Metallic Sheet Materials

Japanese Industrial Standards Committee (JISC), Three-point hardness test method

JIS K 7215:1986 Testing methods for durometer hardness of plastics
JIS H 0511:1990 Testing methods for brinell hardness of titanium sponge
JIS Z 3139:2009 Methods of macro testing and Vickers hardness testing for section of resistance spot, projection and seam welds
JIS K 7078:1991 Testing method for apparent interlaminar shear strength of carbon fiber reinforced plastics by three point loading method
JIS B 7440:1987 Test code for accuracy of coordinate measuring machines
JIS K 7106:1995 Testing method for stiffness of plastics by means of a cantilever beam
JIS K 7233:1986 Testing methods for viscosity of epoxide resins and hardeners
JIS R 1623:1995 Testing method for vickers hardness of fine ceramics at elevated temperatures
JIS K 7060:1995 Testing method for barcol hardness of glass fiber reinforced plastics
JIS K 7207:1995 Testing method for deflection temperature of rigid plastics under load
JIS K 7211:1976 General rules for testing impact strength of rigid plastics by the falling weight method

SE-SIS, Three-point hardness test method

SIS SS-ISO 4292:1991 Methods for the assessment of departure from roundness — Measurement by two- and three-point methods
SIS SS 13 72 50-1984 Concrete testing - Hardened concrete - Compressive strength rom rebound number

German Institute for Standardization, Three-point hardness test method

DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 51902:2009 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN ISO 14271:2018-01 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017); German version EN ISO 14271:2017
DIN EN ISO 3738-1:2010-08 Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982); German version EN ISO 3738-1:2010
DIN EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
DIN 50159-1:2022-06 Metallic materials - Hardness testing with the UCI method - Part 1: Test method
DIN 51917:2002-12 Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
DIN EN ISO 16859-1:2016-02 Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015); German version EN ISO 16859-1:2015
DIN EN ISO 4545-1:2019-09 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2017); German version EN ISO 4545-1:2018 / Note: To be replaced by DIN EN ISO 4545-1 (2022-08).
DIN ISO 11093-6:2005 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN EN ISO 9015-2:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016); German version EN ISO 9015-2:2016
DIN EN ISO 9015-2:2011 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2003); German version EN ISO 9015-2:2011
DIN 50159-1:2022 Metallic materials - Hardness testing with the UCI method - Part 1: Test method
DIN 53121:2014 Testing of paper and board - Determination of the bending stiffness by the beam method
DIN 53121:2008 Testing of paper and board - Determination of the bending stiffness by the beam method
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN EN ISO 6506-1:2015 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
DIN EN ISO 6507-1:2022-08 Metallic materials - Vickers hardness test - Part 1: Test method (ISO/DIS 6507-1:2022); German and English version prEN ISO 6507-1:2022 / Note: Date of issue 2022-07-15*Intended as replacement for DIN EN ISO 6507-1 (2018-07).
DIN EN ISO 4545-1:2022-08 Metallic materials - Knoop hardness test - Part 1: Test method (ISO/DIS 4545-1:2022); German and English version prEN ISO 4545-1:2022 / Note: Date of issue 2022-07-08*Intended as replacement for DIN EN ISO 4545-1 (2019-09).
DIN EN 13892-6:2003 Methods of test for screed materials - Part 6: Determination of surface hardness; German version EN 13892-6:2002
DIN EN 13523-4:2014-10 Coil coated metals - Test methods - Part 4: Pencil hardness; German version EN 13523-4:2014
DIN CEN ISO/TR 21555:2022-01 Paints and varnishes - Overview of test methods on hardness and wear resistance of coatings (ISO/TR 21555:2019); German version CEN ISO/TR 21555:2020
DIN 51944:2009 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 50159-2:2022-06 Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices

Danish Standards Foundation, Three-point hardness test method

DS/ISO 4292:1990 Methods for the assessment of departure from roundness - Measurement by two- and three-point methods
DS/EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
DS/EN ISO 14271/AC:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
DS/EN 14205:2004 Natural stone test methods - Determination of Knoop hardness
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

American Society for Testing and Materials (ASTM), Three-point hardness test method

ASTM F1957-99 Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM F1957-99(2017) Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM B294-92(1997) Standard Test Method for Hardness Testing of Cemented Carbides
ASTM B294-92(2001) Standard Test Method for Hardness Testing of Cemented Carbides
ASTM B294-92(2006) Standard Test Method for Hardness Testing of Cemented Carbides
ASTM B294-92(2006)e1 Standard Test Method for Hardness Testing of Cemented Carbides
ASTM C1505-01 Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM C1505-01(2007) Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM B294-17 Standard Test Method for Hardness Testing of Cemented Carbides
ASTM C78-00 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78-94 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D2240-05(2010) Standard Test Method for Rubber Property8212;Durometer Hardness
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D2134-19 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM E110-14 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM F1957-99(2004) Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM F1957-99(2011) Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM D1635-00(2006) Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D1635-00 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D1635/D1635M-12 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D3828-98 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D3828-97 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D3828-16a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM B277-95(2001) Standard Test Method for Hardness of Electrical Contact Materials
ASTM B277-95 Standard Test Method for Hardness of Electrical Contact Materials
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2134-93 Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM B647-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM E110-14(2023) Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM B647-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM C886-98(2015) Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E92-82(2003)e2 Standard Test Method for Vickers Hardness of Metallic Materials
ASTM D1635/D1635M-19 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM C661-98 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C661-06 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C661-06(2011) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM A833-17 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM C661-15(2022) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM A833-19 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM B647-10(2016) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM D3363-05 Standard Test Method for Film Hardness by Pencil Test
ASTM D3363-05(2011) Standard Test Method for Film Hardness by Pencil Test
ASTM D3363-22 Standard Test Method for Film Hardness by Pencil Test
ASTM C1245/C1245M-03 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test)
ASTM D3363-05(2011)e1 Standard Test Method for Film Hardness by Pencil Test
ASTM D3363-00 Standard Test Method for Film Hardness by Pencil Test
ASTM D3363-20 Standard Test Method for Film Hardness by Pencil Test
ASTM D3802-23 Standard Test Method for Ball-Pan Hardness of Activated Carbon
ASTM E110-82(2002) Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM D2134-93(2001) Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM E110-82(1997)e2 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM D2134-93(2012) Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM C1245-93 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures Point Load Test
ASTM D668-99 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
ASTM D668-99(2004) Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
ASTM D1929-19 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-20 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM C78/C78M-18 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-21 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM B647-84(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D6828-02(2007) Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
ASTM D6828-02 Standard Test Method for Stiffness of Fabric by the Blade/Slot Procedure
ASTM D5873-13 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM C1505-15(2022) Standard Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading
ASTM D1622-98 Standard Test Method for Apparent Density of Rigid Cellular Plastics
ASTM F2433-05(2013) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
ASTM C1895-20 Standard Test Method for Determination of Mohs Scratch Hardness
ASTM E10-23 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E3125-17 Standard Test Method for Evaluating the Point-to-Point Distance Measurement Performance of Spherical Coordinate 3D Imaging Systems in the Medium Range
ASTM D1015-99 Standard Test Method for Freezing Points of High-Purity Hydrocarbons
ASTM B556-90(2007) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
ASTM B556-90(1997) Standard Guide for Measurement of Thin Chromium Coatings by the Spot Test
ASTM B556-90(2002) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
ASTM E110-10 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM B648-10(2015)e1 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM C661-15 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C78/C78M-15a Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15b Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E384-08 Standard Test Method for Microindentation Hardness of Materials
ASTM C1505-15 Standard Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading
ASTM D5873-05 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM D5873-00(2005)e1 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM F2433-05 Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
ASTM C900-06 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM C900-99 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM C900-01 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM C900-12 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM C900-15 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D4366-16(2021) Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM D4366-95 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2187-20 Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E2187-20a Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E2187-02b Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E2187-02 Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E2187-02a Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM D1929-11 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM E2187-16 Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E2187-04 Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM D1929-13 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-13a Standard Test Method for Determining Ignition Temperature of Plastics
ASTM E103-84(1996) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E103-84(2002) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM D3828-02 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D5386-05 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D5873-00 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM D6828-02(2011) Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
ASTM D5873-14 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D3363-05(2011)e2 Standard Test Method for Film Hardness by Pencil Test
ASTM C1895-19 Standard Test Method for Determination of Mohs Scratch Hardness of Ceramic Tile
ASTM C730-98(2013) Standard Test Method for Knoop Indentation Hardness of Glass
ASTM B934-15 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D2583-07 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-06 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D6828-02(2015) Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
ASTM E1842-96 Standard Test Method for Macro-Rockwell Hardness Testing of Metallic Materials (Withdrawn 2002)
ASTM A309-94a(1999) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM A309-01 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM A309-01(2007) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM D4230-02e1 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D4230-02(2007) Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D4230-02(2012) Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM B934-04a Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
ASTM B934-04 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
ASTM D7735-11e1 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
ASTM E18-07 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM F1151-88(1998) Standard Test Method for Determining Variations in Hardness of Film Ribbon Pancakes
ASTM D1865/D1865M-09(2023) Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
ASTM G171-03(2009)e1 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G171-03(2017) Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM D1016-99(2004)e1 Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D1016-05e1 Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D1016-05 Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D1016-99 Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D1016-05(2010) Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D1929-16 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1016-05(2015) Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D3828-07 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3828-07a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D5311-92(2004) Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
ASTM D2821-09 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM D2821-00 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM D2821-00(2005) Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM D2821-00(2005)e1 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM D2821-19 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM D4366-14 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM A1038-10a Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM A1038-13 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM A309-01(2012) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM B934-10 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
ASTM A1038-19 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM G150-13 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
ASTM D3828-12 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D4366-16 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM C1090/C1090M-23 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
ASTM D2134-93(2007) Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker

Professional Standard - Machinery, Three-point hardness test method

JB/T 5996-1992 Roundness measurement Assessment of accuracy of three-point measuring method and the measurement instrument used
JB/T 7758.6-2008 Test method for shore handness of flexible graphite sheets
JB/T 6624-1993 Test Method for Shore Hardness of Flexible Graphite Sheet

PL-PKN, Three-point hardness test method

PN C82055-02-1991 Test methods of pressed carbon products Determination of flexural strength by three-point method
PN B13150-1970 Glass Methodi of te?t Determination of micro-hardneis
PN M53802-1960 Thermometets for Te??lng Flash - Point by th? Marcus*on Me?hod
PN M59117-1986 Bonded abrasive tools Press in of bali method of hardness tes
PN C04551-01-1991 Water and waste water Tests for calcium ; Determination of calcium (calcium hardess) by EDTA method
PN M53801-1960 Thermomefers for Testing Flash-Poin? by the Abal- Pen$ky Me?hod
PN BN 7439-07-1965 Reproduction photography Test methods The testing of sharpness of screen dot
PN F06100-11-1988 Furniture Testing methods for the properties of lacquered and decorative laminated surfaces Determination of hardness
PN A86919-1960 Eatable vegetable fats. Testing methods. Deter- mination of the tempe- rature of softening point and of fuli clarification
PN Z04047 Arkusz 01-1974 Air purity pro?ec?ion Tests for Irichloroathylene De?ermina?ion ot trichloroe?hylen* In work station by colorlmetric me?hod

TR-TSE, Three-point hardness test method

TS 3284-1979 Flexnral Strength Of Concrete (Using Simple Beam With Third-Point Loading)

Taiwan Provincial Standard of the People's Republic of China, Three-point hardness test method

CNS 1233-1984 Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-point Loading)

Indonesia Standards, Three-point hardness test method

SNI 07-1861-1990 Test method for hardenability of steels
SNI 19-0405-1989 Brinell hardness test methods
SNI 08-0314-1989 Test method for stiffness of fabrics
SNI 19-0409-1989 Vickers hardness test methods
SNI 07-3696-1995 Method of taper hardness test in weld heat effected zone
SNI 07-3657-1995 Steel - Determination of total or effective thickness of hard surface layer
SNI 19-0720-1989 Rockwell N hardness test methods
SNI 19-0721-1989 Rockwell T hardness test methods
SNI 03-1751-1990 Weak parts, organic substance, sand hardness, crushed stoned hardness, Determination
SNI 07-3695-1995 Test methods of maximum hardness in weld heat effected zone
SNI 07-3697-1995 Hardess test method welding metal deposit
SNI 03-1756-1990 Sand for mixture and concrete, Determination of hardness
SNI 09-1256-1989 Brake lining for motor vehicles, Test method for gogan hardness
SNI 13-4709-1998 Hardness testing of ore minerals by micro Vickers methods
SNI 13-6660-2002 Determination for shear strength of rock by using of multistage triaxial test method
SNI 05-0719-1989 Micro Vickers hardness test method load from 0,0098 t0 49 N
SNI 06-0468-1989 Measurement method of hard dry layer thickness of paint, lacquer, varnishes and the likes by diamicrometer

Group Standards of the People's Republic of China, Three-point hardness test method

T/SZS 4018-2020 Hardness test method of precious metal jewelry Vickers hardness test method
T/XAI 9-2021 The test method for solder resist hardness of COF

AENOR, Three-point hardness test method

UNE-ISO 11093-6:2017 Paper and board. Testing of cores. Part 6: Determination of bending strength by the three-point method
UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.

Association Francaise de Normalisation, Three-point hardness test method

XP Q35-006*XP ISO 11093-6:1997 Paper and board. Testing of cores. Part 6 : determination of bending strength by the three-point method.
NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
NF A89-568:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds.
NF A89-568*NF EN ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
NF EN ISO 3738-1:2010 Métaux-durs - Essai de dureté Rockwell (échelle A) - Partie 1 : méthode d'essai
NF EN ISO 14271:2017 Soudage par résistance - Essais de dureté Vickers (force réduite et microdureté) sur soudures par résistance par points, par bossages et à la molette
NF T46-027:1976 Rubbers. Determination of crystallization effects by hardness test.
NF EN 12697-26/IN1:2022 Mélanges bitumineux - Méthodes d'essai - Partie 26 : Rigidité
NF EN 12697-26+A1:2022 Mélanges bitumineux - Méthodes d'essai - Partie 26 : rigidité
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF T46-052-2:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2 : IRHD pocket meter method.
NF EN 13892-6:2003 Méthodes d'essai des matériaux pour chapes - Partie 6 : détermination de la dureté de la surface
NF P14-204-6*NF EN 13892-6:2003 Methods of test for screed materials - Part 6 : determination of surface hardness
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé

European Committee for Standardization (CEN), Three-point hardness test method

EN ISO 9015-2:2011 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
EN 10003-1:1994 Metallic Materials - Brinell Hardness Test - Part 1: Test Method
EN 14205:2003 Natural stone test methods - Determination of Knoop hardness
EN ISO 4545-1:2023 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2023)
EN 13523-4:2014 Coil coated metals - Test methods - Part 4: Pencil hardness
CEN EN 13523-4-2001 Coil Coated Metals - Test Methods - Part 4: Pencil Hardness
EN 13892-6:2002 Methods of test for screed materials - Part 6: Determination of surface hardness
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

KR-KS, Three-point hardness test method

KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS B ISO 4292-2014 Methods for the assessment of departure from roundness — Measurement by two-and three-point methods
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS C IEC 60695-2-13-2017 Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignition temperature(GWIT) test method for materials
KS F 2478-2013(2023) Test method measuring changes in height of cylindrical specimens from hydraulic-cement mortar

ES-UNE, Three-point hardness test method

UNE-EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
UNE-EN ISO 6507-1:2018 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018)
UNE-EN ISO 4545-1:2018 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2017)
UNE-EN ISO 6508-1:2017 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
UNE-EN ISO 16859-1:2016 Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015)

Professional Standard - Light Industry, Three-point hardness test method

QB/T 3822-1999 Hardness testing method of the metal deposits for the light industrial products.Microscopic hardness tester method
QB/T 3818-1999 Thickness testing method of the metal deposits for the light industrial products.Spot test

工业和信息化部, Three-point hardness test method

JB/T 13752-2020 Shore hardness test method for brushes and contacts of micromotors
YS/T 1368-2020 Testing method for interface hardness of titanium-steel explosive composite plates
QB/T 5429-2019 Multi-point shoe (boot) temperature conduction performance testing method

IN-BIS, Three-point hardness test method

Professional Standard - Ferrous Metallurgy, Three-point hardness test method

YB/T 4285-2012 Standard test method for indentation hardness of metallic materials by portable hardness testers

AIA/NAS - Aerospace Industries Association of America Inc., Three-point hardness test method

NASM1312-6-1997 Fastener Test Methods; Method 6 Hardness
NASM1312-6-2013 FASTENER TEST METHODS@ METHOD 6@ HARDNESS (Rev 1)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three-point hardness test method

GB/T 9104.5-1988 The test methods for industrial stearic acids--Determination of titer
GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method
GB/T 7962.21-1987 Colourless optical glass test methods--Knoop hardness
GB/T 1730-1993 Determination of hardness of the paint films. Pendulum damping test
GB/T 7962.19-1987 Colourless optical glass test methods--Relative lapping hardness
GB/T 3948-1983 Test method of three primary colors chromaticity coordinates for TV
GB/T 43007-2023 Mattress hardness grade distribution testing and evaluation method
GB/T 7962.18-2010 Test methods of colourless optical glass.Part 18:Knoop hardness
GB/T 31378-2015 Test method for surface hardness of flat panel display (FPD) polarizing film
GB/T 4610-1984 Test for flammability of plastics--Ignition temperature test
GB/T 14634.5-2002 Test methods of rare earth three-band phosphors for fluorescent lamps-Determination of density
GB/T 7690.4-2001 Reinforcement--Test method for yarns Part 4: Determination of stiffness

Professional Standard - Agriculture, Three-point hardness test method

GB 9104.5-1988 Determination of Freezing Point by Industrial Stearic Acid Test Method
GB 6032-1985 Determination of international hardness of vulcanized rubber (30 ~ 85IRHD) micro test method

HU-MSZT, Three-point hardness test method

MSZ 19833-1981

VE-FONDONORMA, Three-point hardness test method

NORVEN 55-43-1962

RU-GOST R, Three-point hardness test method

GOST R 52587-2006 Abrasive tools. Designations and hardness test methods
GOST 9012-1959 Metals. Method of Brinell hardness measurement
GOST 27034-1986 Sintered hard metals. Method of compression and yield strength determination
GOST R 54586-2011 Paint materials. Method for determination of paint film hardness by pencil test
GOST R ISO 6507-1-2007 Metals and alloys. Vickers hardness test. Part 1. Test method
GOST R IEC 62715-6-3-2021 Flexible display devices. Part 6-3. Mechanical test methods. Impact and hardness tests

未注明发布机构, Three-point hardness test method

AS/NZS 1462.22:1997
BS 3730-3:1982(1999) Assessment of departures from roundness — Part 3 : Methods for determining departures from roundness using two - and three - point measurement
BS 903-A26:1995(2001) Physical testing of rubber — Part A26 : Method for determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS 1881-5:1970(1999) Methods of Testing concrete — Part 5 : Methods of testing hardened concrete for other than strength
BS 4578:1970(1999) Specification for Methods of test for hardness of, and for air flow through, infants’ pillows
DIN EN 14205:2004 Test method for natural stone – determination of hardness according to Knoop
BS 1881-114:1983(1998) Testing concrete — Part 114 : Methods for determination of density of hardened concrete
BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

RO-ASRO, Three-point hardness test method

STAS 493-1988 Tests of metals ROCKWELL HARDNESS TEST A.C and D scales
STAS 12181-1984 Tests of Metals HARI NESS TESTING NETHCD UNDER TEH WELDING SEAM
STAS 9806-1974 Tests of metals METHOD FOR DETERMINING THE DEPTH OF CARBURIZED LAYER BY MEASURING THE HARDNESS
STAS 8728/2-1970 POLYVINYL ACETATE AQUEOUS DISPERSIONS Methods of test Determination of wihte point temperature

Professional Standard - Tobacco, Three-point hardness test method

YC/T 28.6-1996 Test of cigarettes physical characteristics--Part 6:Hardmess--Point extrusion method

Standard Association of Australia （SAA）, Three-point hardness test method

AS 1683.15.2:1990 Methods of test for elastomers - Durometer hardness
AS/NZS 3572.22:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of hardness by means of a Barcol impressor
AS 2498.4:1993 Methods of testing rigid cellular plastics - Determination of cross-breaking strength
AS 2001.2.9:1977 Methods of test for textiles - Physical tests - Determination of stiffness of cloth
AS/NZS 1580.405.1:1996 Paints and related materials - Methods of test - Determination of pencil hardness of paint film
AS 4133.4.1:1993/Amdt 1:1994
AS/NZS 1301.455s:1993 Methods of test for pulp and paper - Colour measurement with a diff/0 degrees geometry tristimulus reflectometer
AS 4133.4.1:2007 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of point load strength index

Lithuanian Standards Office , Three-point hardness test method

LST EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2011)
LST EN 14205-2004 Natural stone test methods - Determination of Knoop hardness
LST EN ISO 14271:2011/AC:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds - Technical Corrigendum 1 (ISO 14271:2011/Cor.1:2012)

Aerospace Industries Association, Three-point hardness test method

AIA NASM1312-6-1997 Fastener Test Methods; Method 6 Hardness FSC 53GP

国家市场监督管理总局、中国国家标准化管理委员会, Three-point hardness test method

GB/T 39082-2020 Test method of vickers hardness testing for resistance spot,projection and seam welds

The American Road & Transportation Builders Association, Three-point hardness test method

AASHTO T 80-2008 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
AASHTO T 97-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
AASHTO T 192-1999 Standard Method of Test for Fineness of Hydraulic Cement by the 45-muem (No. 325) Sieve

Malaysia Standards, Three-point hardness test method

MS 1509-2000 Method of test for film hardness of an organic coating by pencil test
MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

Professional Standard - Non-ferrous Metal, Three-point hardness test method

YS/T 63.14-2006 Carbonaceous materials used in the production of aluminium-Part 14:Determination of bending/shear strength by a three-point method
YS/T 63.14-2023 Carbonaceous materials used for the production of aluminium — Part 14:Determination of bending/shears strength — Three point method

Professional Standard - Aerospace, Three-point hardness test method

QJ 482-1990 Test method for microhardness of metal coatings

Aerospace Industries Association/ANSI Aerospace Standards, Three-point hardness test method

AIA/NAS NASM1312-6-2013 FASTENER TEST METHODS, METHOD 6, HARDNESS (Rev 1)
AIA/NAS NASM1312-6-1997 Fastener Test Methods; Method 6 Hardness

AR-IRAM, Three-point hardness test method

IRAM 123-1959

YU-JUS, Three-point hardness test method

JUS C.A4.065-1987 Mechanical testing of metals. Hardness conversions for steels

BELST, Three-point hardness test method

STB 1872-2008 Heels for shoes. Rates hardness end test methods

中国轻工总会, Three-point hardness test method

ZBY 75016-1989 Test method for stiffness of garments using fusible interlinings

AASHTO - American Association of State Highway and Transportation Officials, Three-point hardness test method

T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 80-2005 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials (ASTM Designation: E 18-03)
T 80-2003 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials (ASTM Designation: E 18-02)
T 70-1986 Standard Method of Test for Brinell Hardness of Metallic Materials (R 1993)
T 80-2000 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials (Twentieth Edition; ASTM E18-98)
T 309M/T 309-2006 Standard Method of Test for Temperature of Freshly Mixed Hydraulic- Cement Concrete
T 97-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
T 97-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

IT-UNI, Three-point hardness test method

UNI 4278-1959

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Three-point hardness test method

GJB 3196.6A-2005 Test methods of cartridge.Part 6:Hardness measurement of accessory

European Association of Aerospace Industries, Three-point hardness test method

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1

GM Daewoo, Three-point hardness test method

GMKOREA EDS-T-7678-2011

Canadian General Standards Board （CGSB), Three-point hardness test method

CGSB 148.1 NO.14-93-CAN/CGSB-1993 Methodes D'Essai Des Geotextiles Et Des Geomembranes Rigidite Des Geotextiles

US-FCR, Three-point hardness test method

FCR FED FHC 1-1963 FINENESS OF HYDRAULIC CEMENT BY NOS. 100 AND 200 SIEVES, METHOD OF TEST FOR

Professional Standard - Grain, Three-point hardness test method

LS/T 3704-2007 Technical requirements and test method for wheat hardness index tester

Professional Standard - Textile, Three-point hardness test method

FZ/T 50009.1-1998 Testing method for linear density of three-dimensional crimp polyester staple fibres.Measure at length of single fibres
FZ/T 50009.2-1998 Testing method for average length of three-dimensional crimp polyester staple fibres.Measure at length of single fibres

国家能源局, Three-point hardness test method

SY/T 4113.6-2019 Test methods for performance of pipeline anti-corrosion coatings Part 6: Indentation hardness test

Military Standard of the People's Republic of China-General Armament Department, Three-point hardness test method

GJB 7956-2012 Measurement method for strength and distribution of submarine echo highlight

SG-SPRING SG, Three-point hardness test method

SS 78 Pt.A14-1987 Testing Concrete Part A14: Methods For Determination Of Density Of Hardened Concrete

VN-TCVN, Three-point hardness test method

TCVN 6608-2010 Standard tests method for flash point by small scale closed cup tester

SAE - SAE International, Three-point hardness test method

SAE J949-1981 Test Method for Determining Stiffness (Modulus of Bending) of Fiberboards@ Standard (August 1981)