ZH
RU
ES

Measurement of domestic porosity

Measurement of domestic porosity, Total:80 items.

In the international standard classification, Measurement of domestic porosity involves: Plastics, Surface treatment and coating, Particle size analysis. Sieving, Cans. Tins. Tubes, Fertilizers, Construction materials, Powder metallurgy, Paints and varnishes, Nuclear energy engineering, Radiation measurements, Semiconductor devices, Reinforced plastics, Protection against fire, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Earthworks. Excavations. Foundation construction. Underground works, Testing of metals, Acoustics and acoustic measurements, Thermodynamics and temperature measurements, Measurement of time, velocity, acceleration, angular velocity, Medical equipment.

American National Standards Institute （ANSI), Measurement of domestic porosity

ANSI/ASTM D2873:1994 Test Method for Interior Porosity of Poly (Vinyl Chloride) (PVC) Resins by Mercury Intrusion Porosimetry (08.02)
ANSI/ASTM B741:1995 Test Method for Porosity in Gold Coatings on Metal Substrates by Paper Electrography

Korean Agency for Technology and Standards (KATS), Measurement of domestic porosity

KS D 8542-2015 Standard method for porosity measurement of thermal spray coatings
KS D 8542-2015(2020) Standard method for porosity measurement of thermal spray coatings

International Organization for Standardization (ISO), Measurement of domestic porosity

ISO 15901-1:2005/Cor 1:2007 Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry; Technical corrigendum 1
ISO 7822:1990 Textile glass reinforced plastics; determination of void content; loss on ignition, mechanical disintegration and statistical counting methods

Association Francaise de Normalisation, Measurement of domestic porosity

NF H34-063:2008 Packaging - Flexible aluminium tubes - Test method to determine the porosity of the internal coating.
NF EN 15384-2:2017 Emballage - Méthode d'essai pour déterminer la porosité du revêtement intérieur des tubes souples en aluminium - Partie 2 : méthode au sulfate de cuivre
XP T47-763-2:2012 End of life tyres (ELT) - Determination of density, porosity and void ratio of shredded tyres - Method(s) of measurement and test protocol(s) - Part 2 : method based on the measure of the compressibility (shredded tyres under stress)
NF H34-063-2*NF EN 15384-2:2017 Packaging - test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2 : copper sulphate test
NF H34-063-1*NF EN 15384-1:2017 Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1 : sodium chloride test
NF EN 15384-1:2017 Emballage - Méthode d'essai pour déterminer la porosité du revêtement intérieur des tubes souples en aluminium - Partie 1 : essai au chlorure de sodium
NF EN 2564:2018 Série aérospatiale - Stratifiés de fibres de carbone - Détermination de la teneur en fibres, en résine et du taux de porosité
XP T47-763-1:2012 End of life tyres (ELT) - Determination of density, porosity and void ratio of shredded tyres - Method(s) of measurement and test protocol(s) - Part 1 : method based on water pycnometry (shredded tyres in the abounded state)
NF A95-186-4*NF EN ISO 4499-4:2017 Hardmetals - Metallographic determination of microstructure - Part 4 : characterisation of porosity, carbon defects and eta-phase content
NF EN ISO 4499-4:2017 Métaux-durs - Détermination métallographique de la microstructure - Partie 4 : caractérisation de la porosité, des défauts carbone et de la teneur en phase êta

Danish Standards Foundation, Measurement of domestic porosity

DS/EN 15384:2008 Packaging - Flexible aluminium tubes - Test method to determine the porosity of the internal coating
DS/CEN/CR 14539:2002 Straight ammonium nitrate fertilizers - Comparative study on the determination of porosity (oil retention)
DS/CEN/TR 14539:2021 Straight ammonium nitrate fertilizers – Comparative study on the determination of porosity (oil retention)

Lithuanian Standards Office , Measurement of domestic porosity

LST EN 15384-2008 Packaging - Flexible aluminium tubes - Test method to determine the porosity of the internal coating

TR-TSE, Measurement of domestic porosity

TS 2244-1976 IRON ORE PELLETS METHODS FOR MEASURING THE APPARENT DENSITY AND POROSITY

European Committee for Standardization (CEN), Measurement of domestic porosity

PD CEN/TR 14539:2021 Straight ammonium nitrate fertilizers - Comparative study on the determination of porosity (oil retention)
EN 15384-2:2017 Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test
EN ISO 7822:1999 Textile Glass Reinforced Plastics - Determination of Void Content - Loss on Ignition, Mechanical Disintegration and Statistical Counting Methods
EN ISO 4499-4:2016 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity@ carbon defects and eta-phase content

AENOR, Measurement of domestic porosity

UNE-CR 14539:2003 Straight ammonium nitrate fertilizers - Comparative study on the determination of porosity (oil retention).
UNE-EN ISO 2738:2000 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS. PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF DENSITY, OIL CONTENT AND OPEN POROSITY (ISO 2738:1999)

British Standards Institution (BSI), Measurement of domestic porosity

BS EN ISO 10545-3:1997 Ceramic tiles. Determination of water absorption, apparent porosity, apparent relative density and bulk density
BS 1377-6:1990 Methods of test for soils for civil engineering purposes - Consolidation and permeability tests in hydraulic cells and with pore pressure measurement

Japanese Industrial Standards Committee (JISC), Measurement of domestic porosity

JIS Z 2501:2000 Sintered metal materials -- Determination of density, oil content, and open porosity

American Society for Testing and Materials (ASTM), Measurement of domestic porosity

ASTM D3793-06 Standard Test Method for Low-Temperature Coalescence of Latex Paint Films by Porosity Measurement
ASTM D8325-20 Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements
ASTM B963-08 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedesx2019; Principle
ASTM B963-11 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedesx2019; Principle

API - American Petroleum Institute, Measurement of domestic porosity

API REPORT 9-1979 A Model Study of Axially Loaded Pile Segments Including Pore Pressure Measurements

German Institute for Standardization, Measurement of domestic porosity

DIN EN 15384-2:2017-04 Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test; German version EN 15384-2:2017
DIN EN 15384-1:2017-04 Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test; German version EN 15384-1:2017
DIN EN ISO 7822:2000 Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990); German version EN ISO 7822:1999
DIN EN ISO 4499-4:2016-10 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content (ISO 4499-4:2016); German version EN ISO 4499-4:2016

CZ-CSN, Measurement of domestic porosity

CSN 72 5010 Za-1978

Institute of Electrical and Electronics Engineers (IEEE), Measurement of domestic porosity

IEEE/ANSI N42.31-2003 American National Standard for Measurement Procedures for Resolution and Efficiency of Wide-Bandgap Semiconductor Detectors of Ionizing Radiation
IEEE/ANSI C63.2-2016 American National Standard for Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz
ANSI C63.2-2016 American National Standard for Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz
ANSI/USEMCSC C63.2-2023 American National Standard for Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz

ES-UNE, Measurement of domestic porosity

UNE-EN ISO 4499-4:2016 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content (ISO 4499-4:2016)

RU-GOST R, Measurement of domestic porosity

GOST 8.552-2001 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring the radiant flux and irradiance in spectral range from 0.03 to 0.40 mcm
GOST 8.552-1986 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring radiant flux and irradiance in the wavelength range of 0,03-0,4 um
GOST R 8.727-2010 State system for ensuring the uniformity of measurements. State verification scheme for measuring instruments of sound pressure in water within frequency range from 1·10 -3 to 1·10 6 Hz
GOST 8.551-1986 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring electric power and power factor over the frequency range 40-20000 Hz
GOST 8.551-2013 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of electrical power and energy in the frequency range from 1 to 2500 Hz
GOST 8.641-2014 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of power of electromagnetic oscillations in coaxial and waveguide lines in the frequency range 0,03 to 37,5 GHz
GOST 8.037-1981 State system for ensuring the uniformity of measurements. State primary standard and state verifications schedule for noise power spectral density measuring instruments within the frequency range fro 1,0 up to 37,5 ghz
GOST IEC 61161-2014 State system for ensuring the traceability of measurements. Ultrasonic power in liquids. General requirements to measuring methods in the frequency range 0,5 to 25 MHz
GOST R 8.746-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the ratio error and phase displacement of a.c. power frequency voltage in the range from 0,1/V3 do 750/V3 kB
GOST R 8.765-2011 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the airborne sound pressure in frequency range from 2 Hz to 100 kHz
GOST 8.511-1984 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring specific heat conduction of solid frames in the range of temperatures from 4,2 to 90 K
GOST R 8.836-2013 State system for ensuring the uniformity of measurements. Measurement of radiance and radiant intensity in the wavelength range 120-400 nm. Procedure of measurements
GOST R 8.768-2011 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of relative permittivity and relative permeability at frequency range from 1 MHz to 18 GHz
GOST 8.650-2015 State system for ensuring the uniformity of measurements. State verification scheme for measuring and reproduction instruments of sound pressure in water within frequency range from 1·10 -3 to 1·10 6 Hz
GOST 8.275-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the laser output average power and laser pulse energy within the wavelength range from 0,3 to 12,0 m
GOST 8.275-2016 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring laser output average power and laser pulse energy within the wavelength range from 0,3 to 12,0 m
GOST 8.275-1991 State system for ensuring the uniformity of measurements. State verification schedule for means, measuring laser output average power and laser pulse energy within the wavelength range of 0,3 to 12,0 um
GOST 8.535-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring power of electromagnetic oscillations in waveguide within frequency range from 78,3 to 178,6
GOST 8.038-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring pressure in the air
GOST R 8.875-2014 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the phase shift angle between two electric signals in the range of frequencies from 0,1 MHz to 65 GHz
GOST R 8.813-2013 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the wave resistance, complex reflection and transmission coefficients in coaxial waveguides within the frequency range from 0,01 to 65 GHz
GOST 8.476-1982 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring linear accelerometers in the range of frequencies from 0.5 to 30Hz
GOST 8.102-1973 State system for ensuring the uniformity of measurements. The state standard and all-union verification schedule for instruments measuring power of electromagnetic oscillations in waveguides within frequency range from 37,5 up to 53,57 GHz
GOST R 8.863-2013 State system for ensuring the uniformity of measurements. Insruments for measurement power and irradiance in the wavelength range from 10 to 30 nm. Verification procedure
GOST R 8.711-2013 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of complex dielectric permittivity in range of frequencies from 1 to 178,4 GHz
GOST 8.189-1976 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring electric intensity within frequency range 30 - 1000 mhz
GOST R 8.851-2013 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the attenuation of electromagnetic oscillation within the frequency range from 0 to 178 GHz
GOST 8.098-1973 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring electric intensity within frequency range 0,15-30 mnz
GOST R IEC 61689-2013 State system for ensuring the uniformity of measurements. Ultrasonic medical physiotherapy equipment. General requirements to measurement methods of acoustic output in the frequency range 0,5 MHz to 5,0 MHz
GOST R 8.648-2015 State system for ensuring the Uniformity of measurements. State verification schedule for measuring instruments of alternate electrical voltage to 1000 V in the frequency range from 1·10-2 to 2·10-9 Hz
GOST 8.197-2013 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of the spectral radiance, spectral radiant power, spectral irradiance, spectral radiant intensity, power and radiant intensity in spectral range
GOST R 8.860-2013 State system for ensuring the uniformity of measurements. State verification schedule for noise spectral density means of measuring within the frequency range from 0,002 to 178,3 GHz
GOST 8.275-2013 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring laser output average power and laser pulse energy within the wavelength range from 0,3 to 12,0 mkm
GOST IEC 61689-2016 State system for ensuring the uniformity of measurements. Ultrasonic medical physiotherapy equipment. General requirements to measurement methods of acoustic output in the frequency range 0,5 MHz to 5,0 MHz

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Measurement of domestic porosity

PREN 3641-1992 Aerospace Series Test Methods Heat Resisting Alloys Compacted Material Procedure for Quantitative Determination of Thermally Induced Porosity (T.I.P.) (Edition P 1)