ZH
RU
ES

polar column polar peak

polar column polar peak, Total:499 items.

In the international standard classification, polar column polar peak involves: Surface treatment and coating, Soil quality. Pedology, Civil engineering in general, Corrosion of metals, Galvanic cells and batteries, Lighting, Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Fluid storage devices, Earthworks. Excavations. Foundation construction. Underground works, Power transmission and distribution networks, Rotating machinery, Materials for aerospace construction, Aircraft and space vehicles in general, Medical equipment, Road vehicle systems, Rubber and plastics products, Lamps and related equipment, Electronic display devices, Integrated circuits. Microelectronics, Welding, brazing and soldering, Semiconductor devices, Components for electrical equipment, Electromagnetic compatibility (EMC), Edible oils and fats. Oilseeds, Testing of metals, Conducting materials, Cutting tools, Electronic tubes, Insulating fluids, Optoelectronics. Laser equipment, Production of metals, Sensory analysis, Non-ferrous metals, Quality, Vocabularies, CHEMICAL TECHNOLOGY, Coatings and related processes used in aerospace industry, Products of non-ferrous metals, Electrical engineering in general, Lubricants, industrial oils and related products, Analytical chemistry, Electrical accessories, Shipbuilding and marine structures in general, Protective equipment, Paints and varnishes, Petroleum products in general, Compressors and pneumatic machines, Non-metalliferous minerals, Air quality, Electricity. Magnetism. Electrical and magnetic measurements, Construction materials, Audio, video and audiovisual engineering, Wastes, Animal feeding stuffs, Switchgear and controlgear, Waxes, bituminous materials and other petroleum products, Mechanical testing, Railway rolling stock, Products of the chemical industry, Aerospace electric equipment and systems, Small craft, Vacuum technology, Radiation measurements, Physics. Chemistry, Wood-based panels, Fertilizers, Fuels, On-board equipment and instruments, Gas and steam turbines. Steam engines, Acoustics and acoustic measurements, Protection against fire.


ECIA - Electronic Components Industry Association, polar column polar peak

  • RS-348-1968 Magnetic Field Polarity@ Including Definitions and Determination of Polarity
  • 535ABAE-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode Silver Case@ Axial Lead@ Elastomeric Seal@ Polarized@ Nickel Positive@ Copper Negative Leads@ Insulated
  • TEP197-A-1997 Preparation of X-Radiation Characteristic Curves for Cathode Ray Tubes

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, polar column polar peak

HU-MSZT, polar column polar peak

Electronic Components, Assemblies and Materials Association, polar column polar peak

  • ECA RS-348-1968 Magnetic Field Polarity, Including Definitions and Determination of Polarity
  • ECA 348-1968 Magnetic Field Polarity, Including Definitions and Determination of Polarity

Japanese Industrial Standards Committee (JISC), polar column polar peak

  • JIS A 1205:1999 Test method for liquid limit and plastic limit of soils
  • JIS A 1205:2009 Test method for liquid limit and plastic limit of soils
  • JIS A 1206:1970 Method of test for plastic limit of soils
  • JIS C 7223:1978 Reliability assured voltage regulator diodes and voltage reference diodes
  • JIS H 8682-2:2013 Anodizing of aluminium and its alloys.Measurement of abrasion resistance of anodic oxidation coatings.Part 2: Abrasive jet abrasion resistance test
  • JIS C 7221:1978 Reliability assured small signal diodes
  • JIS H 8684:2013 Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • JIS T 0302:2000 Testing method for corrosion resistance of metallic biomaterials by anodic polarization measurement
  • JIS H 8682-1:2013 Anodizing of aluminium and its alloys.Measurement of abrasion resistance of anodic oxidation coatings .Part 1: Abrasive-wheel-wear abrasion resistance test
  • JIS H 8689:2013 Anodizing of aluminium and its alloys -- Check for continuity of thin anodic oxidation coatings -- Copper sulfate test
  • JIS C 7222:1978 Reliability assured low current rectifier diodes
  • JIS C 7224:1980 Reliability assured low current switching diodes
  • JIS C 7225:1982 Reliability assured rectifier diodes (medium and high current)
  • JIS H 0530:1993 Measurement methods of polarization resistance of copper alloy tubes for condenser
  • JIS H 8686:1994 Test methods for image clarity of anodic oxide coating on aluminium and aluminium alloys

Society of Automotive Engineers (SAE), polar column polar peak

Taiwan Provincial Standard of the People's Republic of China, polar column polar peak

  • CNS 13521-1995 Method of Test of Sacrificial Anodes Used for Cathodic Protection
  • CNS 13902-1997 Expression of the properties of cathode-ray oscilloscopes
  • CNS 13903-1997 Expression of the properties of storage cathode-ray oscilloscopes
  • CNS 12375-1988 Method of Test for Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
  • CNS 12260-1988 Method of Test for Oxidation Characterisrics of Extreme-Pressure Lubricating Oils
  • CNS 14185-1998 Method of test for toughness and tenacity of bituminous materials
  • CNS 8411-1982 Methods of Test for Abrasion Resistance of Anodic Oxidation Coatings on Aluminum and Aluminum Alloys
  • CNS 8410-1982 Methods of Test for Corrosion Resistance of Anodic Oxidation Coatings on Aluminum and Aluminum Alloys

Group Standards of the People's Republic of China, polar column polar peak

  • T/ZZB 1302-2019 Water-based binders on cathode / anode in lithium-ion batteries
  • T/EES 005-2023 Technical requirement of four poles homopolar hybrid magnetic bearings for electric machines
  • T/ZZB 1436-2019 Multipole magnetic rubber encoders
  • T/ZS 0310-2022 Extreme pressure lubricants for metalworking
  • T/ZZB 2263-2021 Non-polar DC relays for charging station
  • T/QGCML 030-2020 Conventional Electrical Standards for Diode Diffusion Sheets
  • T/YH 1013-2020 Requirements for the polarity test of satellite control subsystem
  • T/ZZB 0542-2018 Disposable high frequency active electrode surgical instrument (active electrode is intended to coagulate or cut )
  • T/JSQA 011-2020 ERNiCrFe-7G nickel-based welding wire for gas tungsten arc welding

NL-NEN, polar column polar peak

  • NEN 6347-1985 Vegetable and animal oils and fats - Determination of polar compounds content by column chromatography

Defense Logistics Agency, polar column polar peak

未注明发布机构, polar column polar peak

  • BS 7310:1990(2012) Specification for Ion - selective electrodes, reference electrodes, combination electrodes and ion - selective electrode meters for determination of ions in solution
  • SAE AMS2466C-2018 Hard Anodic Coating of Magnesium Alloys Alkaline Type, High Voltage
  • BS EN ISO 8420:2002(2008) Animal and vegetable fats and oils — Determination of content ofpolar compounds

Military Standards (MIL-STD), polar column polar peak

General Motors Corporation (GM), polar column polar peak

Korean Agency for Technology and Standards (KATS), polar column polar peak

The Aluminum Association, polar column polar peak

IECQ - IEC: Quality Assessment System for Electronic Components, polar column polar peak

  • QC 300201/GB 0002 ISSUE 1-1984 Fixed Tantalum Capacitors Solid Electrolyte Porous Anode Polar Cylindrical Metal Case Hermetic Seal Axial Terminations
  • QC 300301/ GB 0002-1989 Aluminium Electrolytic Capacitors with Non-Solid Electrolyte@ Cylindrical@ Polar Insulated Case@ Rigid Pin and Tag Solder Terminations
  • QC 300202/US 0005-1985 Specifications for Use in Electronic Equipment: Detail Specification: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode; Silver Case@ Axial Lead@ Elastomeric Seal@ Polarized@ Nickel Positive@ Copper Negative Leads Insulated

Professional Standard - Chemical Industry, polar column polar peak

  • HG/T 4592-2014 Electrode active coating of dimensionally stable anode electrolyzer use membrane method
  • HG/T 4541-2013 Water treatment chemicals.Determination of scale inhibition performance.Limited carbonate method

German Institute for Standardization, polar column polar peak

  • DIN 41077:1980 Two-pole plug for polarized secondary clocks; connecting dimensions
  • DIN 3990-5:1987-12 Calculation of load capacity of cylindrical gears; endurance limits and material qualities
  • DIN 18122-1:1997 Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit
  • DIN EN ISO 8251:2018-12 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018); German version EN ISO 8251:2018
  • DIN EN ISO 7599:2018-05 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018); German version EN ISO 7599:2018
  • DIN EN ISO 8251:2018 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
  • DIN EN ISO 7599:2018 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
  • DIN EN 61213:1994 Analogue audio recording on video tape; polarity of magnetization (IEC 61213:1993); German version EN 61213:1994
  • DIN EN ISO 2085:2018-12 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018); German version EN ISO 2085:2018
  • DIN EN ISO 8420 Berichtigung 1:2008-06 Animal and vegetable fats and oils - Determination of content of polar compounds (ISO 8420:2002); German version EN ISO 8420:2002, Corrigendum to DIN EN ISO 8420:2002-08; German version EN ISO 8420:2002/AC:2008
  • DIN EN ISO 6848:2015-12 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015); German version EN ISO 6848:2015
  • DIN EN ISO 8420:2002-08 Animal and vegetable fats and oils - Determination of content of polar compounds (ISO 8420:2002); German version EN ISO 8420:2002
  • DIN 4000-18:1988-12 Tabular layouts of article characteristics for semiconductor diodes
  • DIN 25482-3:1993 Limit of detection and limit of decision for nuclear radiation measurements; measurement by use of linear analog ratemeters
  • DIN EN ISO 2085:2018 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)

American Society for Testing and Materials (ASTM), polar column polar peak

  • ASTM D4318-00 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM D4318-10e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM D4318-05 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM D6558-00a(2005) Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D6558-00(2010) Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM E1697-95(1999) Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes
  • ASTM E1697-05(2020) Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes
  • ASTM D6558-00a(2010) Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D4127-06 Standard Terminology Used with Ion-Selective Electrodes
  • ASTM D4127-12 Standard Terminology Used with Ion-Selective Electrodes
  • ASTM D6559-00a(2005) Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D6559-00a(2010) Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM E81-96(2007) Standard Test Method for Preparing Quantitative Pole Figures
  • ASTM E81-96(2011) Standard Test Method for Preparing Quantitative Pole Figures
  • ASTM D6559-00A(2016)e1 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D6558-22 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D6559-22 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D6558-00A(2015)e1 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D4318-17 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM D4318-17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM B136-84(1998) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
  • ASTM D6745-22 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM B136-84(2018) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
  • ASTM E857-05e1 Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
  • ASTM E857-05 Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
  • ASTM E857-87(1997) Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
  • ASTM E857-05(2012) Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
  • ASTM D6745-06(2011) Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM D6745-01 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM D2893-03 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
  • ASTM D6745-06 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM D2893-04(2009) Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
  • ASTM D6745-11 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM D6745-11(2015) Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM D2893-19 Standard Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
  • ASTM D2596-97(2002)e1 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
  • ASTM D2596-97(2008) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
  • ASTM D2596-97 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
  • ASTM D2783-03(2009) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
  • ASTM E1232-07(2019) Standard Test Method for Temperature Limit of Flammability of Chemicals

SE-SIS, polar column polar peak

  • SIS SS 02 71 21-1990 Geotechnical tests — Plastic limit
  • SIS SS-ISO 6581:1985 Anodizing of aluminium and its alloys - Determination of the fastness to ultra-violet light of coloured anodic oxide coatings

RO-ASRO, polar column polar peak

  • STAS 1913/4-1986 Foundation ground DETERMINATION OF PLASTIC LIMITS
  • STAS 11200/5-1978 Graphical symbols GRAPHICAL SYMBOL FOR PLUS; POSITIVE POLARITY
  • STAS 11200/6-1978 Graphical symbols GRAPHICAL SYMBOL FOR MINUS ; NEGATIVE POLARITY
  • STAS 1916-1964
  • STAS 10316-1975 DIESEL ENGINE FUELS Determination of the limit point of filtrability
  • STAS 11286-1989 SCALES AND SIZES FOR PLOTTING FREQUENCY CHARACTERISTICS AND POLAR DIAGRAMS
  • STAS 12123/3-1983 Semiconductor devices VOLTAGE REFERENCE DIODES AND VOLTAGE REGULATOR DIODES Measuring methodes for electrical characteristics
  • STAS 11102-1978 CARBONACEOUS MASS FOR CONTINUOUS ELECTRODES Plasticity determination
  • STAS 11200/461-1981 Graphical symbols GRAPHICAL SYMBOL FOR MIG/MAG-WELDING
  • STAS 12123/2-1983 Semiconductor devices LOW POWER SIGNAL DIODES, INCLUDING SWITCHING DIODES Measuring methods for electrical characteristics
  • STAS 11200/464-1981 Graphical symbols GRAPHICAL SYMBOL FOR MIG/MAG-TORCH

Standard Association of Australia （SAA）, polar column polar peak

YU-JUS, polar column polar peak

  • JUS A.A4.302-1990 Tabular layouts ofarticle characteristics for semiconductor diodes
  • JUS C.T7.241-1977 Atiodic oxidation of ahtminium and aluminium alloys. Assessment of resistance of anodic coatings to cracking by deformation
  • JUS N.R1.101-1977 Electronic tubes. Measurements of the eletricalproperties. Measurement ofelectrode current
  • JUS N.R1.171-1988 TV colaur cathode ray tubes, type 30AX. Mechanical characteristics

United States Navy, polar column polar peak

Professional Standard - Medicine, polar column polar peak

GM North America, polar column polar peak

国家市场监督管理总局、中国国家标准化管理委员会, polar column polar peak

  • GB/T 38348-2019 Multipole magnetic rubber encoders
  • GB/T 13083-2018 Determination of fluorine in feeds—Ion selective electrode method
  • GB/T 24488-2021 Test method for electrochemical properties of magnesium alloys sacrificial anode
  • GB/T 38621-2020 Transient thermal test method for light emitting diode modules

American National Standards Institute （ANSI), polar column polar peak

  • ANSI/AHRI 1210-2011 Performance Rating of Variable Speed Drives
  • ANSI/AHRI 520-2004 Performance Rating of Positive Displacement Condensing Units (formerly ANSI/ARI 520-2004)
  • ANSI/UL 61965-2009 Standard for Safety for Mechanical Safety for Cathode Ray Tubes
  • ANSI/AWS C5.5/C5.5M:2003 Recommended Practices for Gas-Tungsten-Arc Welding
  • ANSI/UL 1691-2013 Standard for Safety for Single Pole Locking-Type Separable Connectors
  • ANSI/ASA S1.22-2021 AMERICAN NATIONAL STANDARD Scales and sizes for plotting frequency characteristics and polar diagrams (a nationally adopted international standard)
  • ANSI/UL 8752-2013 Standard for Safety for Organic Light Emitting Diode (OLED) Panels

AENOR, polar column polar peak

  • UNE 103104:1993 TEST FOR PLASTIC LIMIT OF A SOIL.
  • UNE 51014:1979 MEASUREMENT OF THE PROPERTIES OF EXTREME PRESSURE OF LUBRICATING PRODUCTS
  • UNE-EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011)
  • UNE 21353-1:1979 EXPRESSION OF THE PROPERTIES OF CATHODE-RAY OSCILLOSCOPES. GENERAL.
  • UNE-EN ISO 2085:2011 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2010)
  • UNE 38024:1993 ANODIZING OF ALUMINIUM AND ITS ALLOYS. ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDE COATINGS USING ARTIFICIAL LIGHT.
  • UNE 51126:1987 STANDARD METHOD FOR MEASUREMENT OF EXTREME-PRESSURE PROPERTIES OF LUBRICATING GREASE (FOUR-BALL METHOD)

British Standards Institution (BSI), polar column polar peak

  • BS EN 62639:2012 Fluorescent induction lamps. Performance specification
  • BS EN ISO 8251:2011 Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
  • BS EN ISO 7599:2018 Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on aluminium
  • BS EN 12373-15:2001 Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • BS 3504:1962 Specification for magnesium-activated nickel for cathodes of electronic tubes and valves
  • BS EN 1263-2:2002 Safety nets - Safety requirements for the positioning limits
  • BS EN ISO 3211:2010 Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • BS EN 12373-16:2001 Aluminium and aluminium alloys. Anodizing. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
  • BS EN ISO 8251:2018 Tracked Changes. Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
  • BS EN 61000-3-3:1995 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection
  • BS EN ISO 2085:2010 Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
  • BS EN 61213:1994 Analogue audio recording on video tape. Polarity of magnetization
  • BS PD IEC/TS 62861:2017 Guidelines for principal component reliability testing for LED light sources and LED luminaires
  • BS EN ISO 9692-3:2001 Welding and allied processes. Joint preparation. Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
  • BS EN 12384:1999 Copper and copper alloys - Determination of spring bending limit on strip
  • BS EN 12384:1999(2000) Copper and copper alloys - Determination of spring bending limit on strip
  • BS EN 55017:2011 Methods of measurement of the suppression characteristics of passive EMC filtering devices
  • BS ISO 22426:2020 Assessment of the effectiveness of cathodic protection based on coupon measurements
  • BS EN ISO 19009:2015 Small craft. Electric navigation lights. Performance of LED lights
  • BS EN ISO 3211:2018 Tracked Changes. Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • BS ISO 12987:2005 Carbonaceous materials for the production of aluminium - Anodes, cathodes blocks, sidewall blocks and baked ramming pastes - Determination of the thermal conductivity using a comparative method
  • BS PD IEC TS 62607-8-2:2021 Nanomanufacturing. Key control characteristics. Nano-enabled metal-oxide interfacial devices. Test method for the polarization properties by thermally stimulated depolarization current
  • BS EN ISO 8420:2002 Animal and vegetable fats and oils. Determination of content of polar compounds

Association of German Mechanical Engineers, polar column polar peak

CZ-CSN, polar column polar peak

  • CSN 36 4175-1965 Alkaline mercury cells and batteries
  • CSN 03 8151-1961 The determination for sealing of anodically coated aluminium
  • CSN 42 0345-1987 Metal testing. Testing of proportional limit of tensile strength
  • CSN 01 0222-1978 Applied statistics. Significance tests for extreme values
  • CSN ISO 3211:1993 Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxide coatings to cracking by deformation
  • CSN 05 5160-1975 Elektrodes for welding-on layera of special properties. Technical delivery code
  • CSN ISO 8420:1994 Animal and vegetables fats and oils.Determination of polar compounds content
  • CSN ISO 6581:1993 Anodizing of aluminium and its alloys. Determinatíon of the fastness to ultra-violet light of coloured anodk oxide coatings
  • CSN 75 7505-1998 Water quality - Determination of non-polar extractable matters by IR spectrometric method

U.S. Air Force, polar column polar peak

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, polar column polar peak

  • GB/T 26186-2010 Cold cathode fluorescent lamps service.Performance requirements
  • GB/T 3074.3-2008 Method for the determination of the oxidation resistance of graphite electrodes
  • GB/T 5295-2012 The spectral response characteristic series of photocathodes
  • GB/T 3074.3-1982 Method for determination of the oxidation resistance of graphite electrodes
  • GB/T 3074.2-2008 Method for the determination of the elastic modulus of graphite electrodes
  • GB 5295-1985 The spectral response characteristic series of photocathodes
  • GB/T 3074.2-1982 Method for determination of the elastic modulus of graphite electrodes
  • GB/T 5295-1985 The spectral response characteristic series of photocathodes
  • GB/T 3789.2-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of current of anode and grid
  • GB/T 17848-1999 Test methods for electrochemical properties of sacrificial anodes
  • GB/T 12583-1998 Standard test method for measurement of extreme-pressure properties of lubricating fluids (four-ball method)
  • GB/T 22706-2008 Self-ballasted cold cathode fluorescent lamps.Service-preformance requirements
  • GB/T 7790-1996 Test method for the resistance of cathodic disbondment of anticorrosive paint
  • GB/T 41760-2022 Test method for spontaneous polarization of tourmaline
  • GB/T 12967.5-1991 Anodizing of aluminium and aluminium alloys--Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • GB/T 12967.4-1991 Anodizing of aluminium and aluminium alloys--Determination of the fastness to ultraviolet light of coloured anodic oxidation coatings
  • GB/T 8754-2006 Anodizing of aluminium and its alloys. Insulation check.by measurement of breakdown potential
  • GB/T 8752-2006 Anodizing of aluminium and its alloys. Check of continuity of thin anodic oxide coating. Copper sulphate test
  • GB/T 8752-1988 Anodizing of aluminium and aluminium alloys--Check of continuity of thin anodic oxide coatings--Copper sulphate test
  • GB/T 15555.12-1995 Solid waste--Glass electrade test--Method of corrosivity
  • GB/T 11144-2007 Standard test method for measurement of extreme-pressure prosperties of lubricating fluids (Timken method)
  • GB/T 28178-2011 Landfill disposal for very low level radioactive waste
  • GB/T 20505-2006 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • GB/T 12967.1-1991 Anodizing of aluminium and aluminium alloys--Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
  • GB/T 13083-2002 Determination of fluorine in feed--Ion selective electrode method
  • GB/T 24210-2009 Test method for the elastis modulus of whole graphite electrodes.Velocity of sound
  • GB/T 32264-2015 Method of performance testing for gas chromatography-single quadrupole mass pectrometry
  • GB/T 24488-2009 Test method for electrochemical properties of magnesium alloys sacrificial anode
  • GB/T 26105-2010 Test of rust preventive oil for rust preventing ability.Electrochemical measurement with wire beam electrode
  • GB/T 32954-2016 Determination of fluoride content for fertilizers.Ion selective electrode method
  • GB/T 11144-1989 Lubricating fluids--Measurement of extreme pressure properties--Timken method
  • GB/T 21091-2007 Self-ballasted electrodeless fluorescent lampos for general lighting services.Parformance requirements

International Electrotechnical Commission (IEC), polar column polar peak

  • IEC 63182-5:2021 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: Cylinder-cores
  • IEC 61213:1993 Analogue audio recording on video tape; polarity of magnetization
  • IEC PAS 62816-2:2013 External electrode fluorescent lamps - Part 2: Performance specifications
  • IEC PAS 62815-2:2013 Cold cathode fluorescent lamps - Part 2: Performance specifications
  • IEC 34A/1596/PAS:2012 Cold Cathode Fluorescent Lamps - Part 2: Performance Specifications
  • IEC 34A/1598/PAS:2012 External Electrode Fluorescent Lamps - Part 2: Performance Specifications
  • IEC TS 62861:2017 Guidelines for principal component reliability testing for LED light sources and LED luminaires
  • IEC 63286:2022 Flexible organic light emitting diode (OLED) panels for general lighting - Performance requirements
  • IEC TS 62607-4-1:2014 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method
  • IEC 60263:2020 Scales and sizes for plotting frequency characteristics and polar diagrams

CEN - European Committee for Standardization, polar column polar peak

  • EN ISO 8251:2018 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
  • EN ISO 3211:2018 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation

International Organization for Standardization (ISO), polar column polar peak

  • ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
  • ISO 8251:2018 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
  • ISO 7599:2018 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium
  • ISO 3211:1977 Anodizing of aluminium and its alloys; Assessment of resistance of anodic oxide coatings to cracking by deformation
  • ISO 2135:1976 Anodizing of aluminium and its alloys — Accelerated test of lightfastness of coloured anodic oxide coatings
  • ISO 3211:2010 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • ISO 2085:2018 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
  • ISO 3211:2018 Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • ISO 2085:1976 Anodizing of aluminium and its alloys; Check of continuity of thin anodic oxide coatings; Copper sulphate test
  • ISO 2085:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
  • ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • ISO 8420:2002 Animal and vegetable fats and oils - Determination of content of polar compounds
  • ISO 8420:1990 Animal and vegetable fats and oils; determination of polar compounds content
  • ISO 2135:2010 Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
  • ISO 2135:2017 Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
  • ISO 11929-4:2022 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Gui
  • ISO/CD 1467 General purpose push-pull single-pole circuit-breakers for aircraft — Performance requirements
  • ISO/CD 1509 General purpose push-pull three-pole circuit-breakers for aircraft — Performance requirements
  • ISO/DIS 1467:2023 General purpose push-pull single-pole circuit-breakers for aircraft — Performance requirements

European Committee for Standardization (CEN), polar column polar peak

  • EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011)
  • EN ISO 3211:2010 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2010)
  • EN 12373-15:2000 Aluminium and Aluminium Alloys - Anodizing - Part 15: Assessment of Resistance of Anodic Oxidation Coatings to Cracking by Deformation
  • EN ISO 2085:2018 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
  • EN ISO 2085:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2010)
  • EN ISO 8420:1995 Animal and Vegetable Fats and Oils - Determination of Polar Compounds Content (ISO 8420 : 1990)
  • EN 12373-16:2001 Aluminium and Aluminium Alloys - Anodizing - Part 16: Check for Continuity of Thin Anodic Oxidation Coatings - Copper Sulfate Test
  • EN 12384:1999 Copper and copper alloys - Determination of spring bending limit on strip

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, polar column polar peak

  • JEDEC JESD211-2009 Zener and Voltage Regulator Diode Rating Verification and Characterization Testing
  • JEDEC JESD286-B-2000 Standard for Measuring Forward Switching Characteristics of Semiconductor Diodes

Association Francaise de Normalisation, polar column polar peak

  • NF EN ISO 8251:2018 Anodisation de l'aluminium et de ses alliages - Détermination de la résistance à l'abrasion des couches d'oxyde anodiques
  • NF A91-491:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings.
  • NF A91-491*NF EN ISO 8251:2018 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
  • NF A91-450*NF EN ISO 7599:2018 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium
  • NF EN ISO 2085:2018 Anodisation de l'aluminium et de ses alliages - Contrôle de la continuité des couches anodiques minces - Essai au sulfate de cuivre
  • NF P94-051:1993 Soil : inverstigation and testing. Determination of Atterberg's limits. Liquid limit test using cassagrande apparatus. Plastic limit test on rolled thread.
  • NF A91-479*NF EN ISO 2085:2018 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
  • NF C64-101:1976 A.C.high-voltage switchgear and control gear. Three-pole circuit-breakers. Characteristics.
  • NF C97-195*NF EN 61213:1994 Analogue audio recording on video tape. Polarity of magnetization.
  • NF A81-011*NF EN ISO 6848:2015 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification
  • NF EN 61213:1994 Enregistrement audio-analogique sur bande vidéo - Polarité de magnétisation.
  • NF A91-479:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test.
  • NF F19-809-3:1997 Railway rolling stock. "Extreme pressure" oils for mechanical transmissions of motive power units. Part 3 : high thermal stability oil. Endurance test method on fixed post machine.
  • NF T60-248*NF EN ISO 8420:2002 Animal and vegetable fats and oils - Determination of content of polar compounds
  • NF T60-248:1995 Animal and vegetable fats and oils. Determination of polar compounds content.
  • NF M07-099:2000 Émulsions eau dans gazole - Détermination de la température limite de filtrabilité
  • NF C97-663*NF EN IEC 60263:2020 Scales and sizes for plotting frequency characteristics and polar diagrams

Institute of Electrical and Electronics Engineers (IEEE), polar column polar peak

  • IEEE Std C63.12-1999 Recommended Practice for Electromagnetic Compatibility Limits
  • IEEE Std C63.12-1987 Recommended practice for electromagnetic compatibility limits
  • SMPTE RP 134:1994 RP 134:1994 - SMPTE Recommended Practice - Polarity for Analog Audio Magnetic Recording and Reproduction

TR-TSE, polar column polar peak

  • TS 953-1972 MECHANICAL PROPERTY LIMITS FOR ALUMINIUM ALLOY FOROINGS
  • TS 2677-1977 ANODIZING OF ALUMINIUM AND ITS ALLOYS - ASSESSMENT OF RESISTANCE OF ANODIC COATINGS TO CRACKING BY DEFORMATION
  • TS 952-1972 MECHANICAL PROPERTY LIMITS FOR RIVET STOCK OF ALUMINIUM AND ALUMINIUM ALLOYS
  • TS 923-1972 MECHANICAL. PROPERTY LIMITS FOR ROLLED PRODUCTS OF ALUMIN?UM AND AL.UMINT?M AJJjOYS
  • TS 996-1972 MECHANICAL PROPERTY LIMITS FOR EXTRUDED PRODUCTS OF ALUMINIUM AND ALUMINIUM ALLOYS

Professional Standard - Light Industry, polar column polar peak

Society of Motion Picture and Television Engineers (SMPTE), polar column polar peak

Underwriters Laboratories (UL), polar column polar peak

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., polar column polar peak

Canadian Standards Association (CSA), polar column polar peak

ES-UNE, polar column polar peak

  • UNE-EN 61965:2003 Mechanical safety of cathode ray tubes (Endorsed by AENOR in May of 2004.)
  • UNE-EN ISO 8251:2019 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
  • UNE-EN ISO 7599:2018 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
  • UNE-EN ISO 2085:2019 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
  • UNE-EN 61213:1993 ANALOGUE AUDIO RECORDING ON VIDEO TAPE. POLARITY OF MAGNETIZATION. (Endorsed by AENOR in December of 1995.)
  • UNE-EN ISO 6848:2015 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)
  • UNE-EN ISO 8420:2002/AC:2008 Animal and vegetable fats and oils - Determination of content of polar compounds (ISO 8420:2002/Cor 1:2004)

RU-GOST R, polar column polar peak

  • GOST 11612.3-1975 Photomultipliers. Measuring method of non-uniformity of light anode sensitivity over the photocatode area
  • GOST 32502-2013 Lubricating fluids. Detrmination extreme-pressure properties on four ball mashine
  • GOST 32501-2013 Lubricating greases. Determination of extreme-pressure properties on four-ball mashine
  • GOST 310.4-1981 Cements. Methods of tests of bending and compression strengths
  • GOST 26169-1984 Radioelectronic equipment electromagnetic compatibility. High-power bipolar high-frequency linear transistors intermodulation component coefficient standards
  • GOST R 50006-1992 Lasers and solid-state laser heads. Method of measurement of polarization characteristics
  • GOST R ISO 8420-2013 Animal and vegetable fats and oils. Determination of content of polar compounds
  • GOST 9622-1987 Laminated glued wood. Methods for determination of ultimate strenght and modulus of elasticity in tension
  • GOST R 56230-2014 LED modules for general lighting. Performance requirements
  • GOST 22254-1992 Diesel fuels. Cold filter method for determination of lowest filtering temperature
  • GOST 9623-1987 Laminated glued wood. Method for determination of ultimate strength and modulus of elasticity in compression

Danish Standards Foundation, polar column polar peak

  • DS/EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
  • DS/EN ISO 2085:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
  • DS/EN ISO 6848:2005 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification
  • DS/EN ISO 8420/AC:2008 Animal and vegetable fats and oils - Determination of content of polar compounds
  • DS/EN ISO 8420:2002 Animal and vegetable fats and oils - Determination of content of polar compounds
  • DS/ISO 2085:1988 Anodizing of aluminium and its alloys. Check of continuity of thin anodic oxide coatings. Copper sulphate test
  • DS/ISO 4400:1989 Fluid power systems and components. Three-pin electrical plug connector. Characteristics and requirements

Professional Standard - Non-ferrous Metal, polar column polar peak

  • YS/T 411-1998 The measuring method of CO2 reaction of anode carbon,anode paste for aluminium electrolysis
  • YS/T 965-2014 Determinator for the reactivity to carbon dioxide of prebaked anodes used in the production of aluminium

BR-ABNT, polar column polar peak

U.S. Military Regulations and Norms, polar column polar peak

PL-PKN, polar column polar peak

  • PN T06516-1990 ?on — selective elektrodes General re?uirements and tests
  • PN C04573 ArkusZ02-1974 Water and waste water Tests for organie solvents extrac- table matters Determination of impolar and polar of petroleum extractable organie matters by gravimetric method

Natural Gas Processor's Association (NGPA), polar column polar peak

  • GPA RR-3-1971 Enthalpy and Entropy of Non-Polar Liquids at Low Temperatures

North Atlantic Treaty Organization Standards Agency, polar column polar peak

Professional Standard - Petrochemical Industry, polar column polar peak

  • SH/T 0123-1993 Determination of oxidation performance of extreme pressure lubricating oil
  • SH/T 0202-1992 Determination of extreme pressure performance of grease (four-ball machine method)
  • SH/T 0784-2006 Standard test method for determining extreme pressure properties of lubricating grease using a high-frequency, linear-oscillation (SRV) test machine
  • SH/T 0187-1992 Determination method of extreme pressure performance of lubricating oil (Falex method)

中国石油化工总公司, polar column polar peak

  • SH/T 0123-1992 Determination of oxidation properties of extreme pressure lubricating oils

PT-IPQ, polar column polar peak

  • E 302-1974
  • NP EN 12373-15-2001 Aluminium and aluminium alloys Anodizing Part 15:Assessment of resistance of anodic oxidation coatings to cracking by deformation

KR-KS, polar column polar peak

  • KS D ISO 3211-2012 Anodizing of aluminium and its alloys－Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • KS B ISO 6848-2016 Arc welding and cutting－Nonconsumable tungsten electrodes－Classification
  • KS M 1077-2008(2023) Determination of lead and cadmium in anode active substance for lithium cell

Professional Standard - Machinery, polar column polar peak

  • JB/T 10875-2008 Measuring methods for optical properties of LEDs
  • JB/T 9185-1999 Welding procedure specification for gas tungsten arc welding
  • JB/T 10528-2005 Anti-rust properties test of rust preventive oil.Electrochemical measurement with wire beam electrode

IN-BIS, polar column polar peak

SAE - SAE International, polar column polar peak

  • SAE AMS2685C-1989 Welding@ Tungsten Arc@ Inert Gas (GTAW Method)
  • SAE AMS2685F-2017 Welding@ Tungsten Arc@ Inert Gas (GTAW Method)
  • SAE AMS2466-1997 Hard Anodic Coating of Magnesium Alloys Alkaline Type@ High Voltage
  • SAE J3021-2014 Recommended Practice for Determining Material Properties of Li-Battery Cathode Active Materials
  • SAE J3021-2021 Recommended Practice for Determining Material Properties of Li-Battery Cathode Active Materials

Lithuanian Standards Office , polar column polar peak

  • LST EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011)
  • LST EN 61965-2004 Mechanical safety of cathode ray tubes (IEC 61965:2003)
  • LST EN 61213-2001 Analogue audio recording on video tape. Polarity of magnetization (IEC 61213:1993)
  • LST EN ISO 2085:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2010)

IT-UNI, polar column polar peak

ZA-SANS, polar column polar peak

  • SANS 5852:2008 Plastic limit and plasticity index of fines in aggregates for base-courses
  • SANS 8420:2003 Animal and vegetable fats and oils - Determination of content of polar compounds

ESDU - Engineering Sciences Data Unit, polar column polar peak

  • ESDU 82030 F-1986 Fire hazard properties: flash points@ flammability limits and autoignition temperatures.

BE-NBN, polar column polar peak

CU-NC, polar column polar peak

  • NC 66-29-1984 Electronics. Bipolar Transistors Measurement Methods

Electronic Components, Assemblies and Materials Association, polar column polar peak

GB-REG, polar column polar peak

AASHTO - American Association of State Highway and Transportation Officials, polar column polar peak

  • T 373M/T 373-2017 Standard Method of Test for Comparative Qualitative Corrosion Characterization of Steel Bars Used for Concrete Reinforcement (Linear Polarization Resistance and Potentiodynamic Polarization Tests)
  • T 90-2014 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
  • T 90-2015 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
  • T90-1994 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
  • T 90-2000 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils

(U.S.) Telecommunications Industries Association , polar column polar peak

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, polar column polar peak

  • REPORT M.2175-2010 Simultaneous dual linear polarization transmission technique using digital cross-polarization cancellation for MSS systems
  • REPORT 919-2-1990 Performance of a Low-Altitude@ Polar-Orbiting Satellite EPIRB System (Question 90/8)

International Telecommunication Union (ITU), polar column polar peak

  • ITU-R S.1844-2009 Cross-polarization reference gain pattern for linearly polarized very small aperture terminals (VSAT) for frequencies in the range 2 to 31 GHz
  • ITU-R S.1844 FRENCH-2009 Cross-polarization reference gain pattern for linearly polarized very small aperture terminals (VSAT) for frequencies in the range 2 to 31 GHz

(U.S.) Ford Automotive Standards, polar column polar peak

The American Road & Transportation Builders Association, polar column polar peak

  • AASHTO T 90-2014 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
  • AASHTO T 90-2015 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
  • AASHTO T 90-2016 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils

PH-BPS, polar column polar peak

  • PNS ISO 6848:2021 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification

FI-SFS, polar column polar peak

CH-SNV, polar column polar peak

Professional Standard - Energy, polar column polar peak

  • NB/SH/T 0882-2014 Standard test method for determining extreme pressure properties of lubricating oils using SRV test machine

Professional Standard - Ferrous Metallurgy, polar column polar peak

  • YB/T 5212-1993 Test method for the elastis modulus of whole graphite electrodes -Velocity of sound

GOSTR, polar column polar peak

  • GOST ISO 6848-2020 Arc welding and cutting. Nonconsumable tungsten electrodes. Classification

US-FCR, polar column polar peak

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., polar column polar peak

  • IEEE 503-1978 STANDARD FOR MEASUREMENT AND CHARACTERIZATION OF DIODE-TYPE CAMERA TUBES

European Committee for Electrotechnical Standardization（CENELEC）, polar column polar peak

  • EN IEC 63286:2022 Flexible organic light emitting diode (OLED) panels for general lighting - Performance requirements
  • EN 61213:1994 Analogue Audio Recording on Video Tape - Polarity of Magnetization
  • EN IEC 60263:2020 Scales and sizes for plotting frequency characteristics and polar diagrams

IEC - International Electrotechnical Commission, polar column polar peak

  • PAS 62816-2-2013 External electrode fluorescent lamps – Part 2: Performance specifications (Edition 1.0)
  • PAS 62815-2-2013 Cold cathode fluorescent lamps – Part 2: Performance specifications (Edition 1.0)

TIA - Telecommunications Industry Association, polar column polar peak

  • TSB125-2001 Guidelines for Maintaining Optical Fiber Polarity Through Reverse-Pair Positioning

Aeronautical Radio Inc., polar column polar peak

工业和信息化部, polar column polar peak

  • SJ/T 11792-2022 Test method for conductivity of lithium-ion battery electrode materials

Professional Standard - Electron, polar column polar peak

  • SJ/Z 9184-1995 Specifications for determination of bipolar aluminum electrolytic capacitors used for VCR
  • SJ/T 11403-2009 Laser diode modules used for telecommunication.Reliability assessment

ANS - American Nuclear Society, polar column polar peak

  • 2.3-1983 STANDARD FOR ESTIMATING TORNADO AND EXTREME WIND CHARACTERISTICS AT NUCLEAR POWER SITES

WRC - Welding Research Council, polar column polar peak

  • BULLETIN 21-1955 COATING MOISTURE INVESTIGATIONS OF AUSTENITIC ELECTRODES OF THE MODIFIED 18-8 TYPE

  Polar column, Polar column, Polar and non-polar columns, polar peak, polar peak, Polar column Non-polar column, Polar column Polar column, Polarity column polarity, Polar vs. Nonpolar Columns, Non-polar column Polar column, polar column polar peak, Chromatography polar and non-polar columns, Column polarity, Non-polar and polar columns, Polar Polar Column, Polar column peak, polar peak+, Column polarity, Polar and non-polar columns, polar column.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved