ZH
RU
ES

Plastic thermal conductivity test

Plastic thermal conductivity test, Total:431 items.

In the international standard classification, Plastic thermal conductivity test involves: Plastics, Reinforced plastics, Refractories, Protection of and in buildings, Pipeline components and pipelines, Rubber and plastics products, Conducting materials, Raw materials for rubber and plastics, Farming and forestry, Rubber, Welding, brazing and soldering, Insulating fluids, Construction materials, Heat recovery. Thermal insulation, Metrology and measurement in general, Glass, Surface treatment and coating, Electronic components in general, External sewage systems, Valves, Cellular materials, Ceramics, Electrical and electronic testing, Adhesives, Semiconducting materials, Electrical wires and cables, Linear and angular measurements, Soil quality. Pedology, Heat pumps, Earthworks. Excavations. Foundation construction. Underground works, Elements of buildings, Thermodynamics and temperature measurements, Inorganic chemicals, Mining and quarrying, Materials for aerospace construction, Insulating materials, Semiconductor devices, Protection against fire, Products of the chemical industry.

CZ-CSN, Plastic thermal conductivity test

CSN 64 0526-1995 Testing of plastics. Determination of Thermal Conductivity
CSN 64 0528-1993 Plastics. Determination of coefficient of linear thermal expansion of plastics
CSN 72 7014-1994 Determination of Steady State Thermal Conductivity of Materials. Evaluating of Tests
CSN 72 6040-1985 Refractory materials and produts. Determination of thermal conductivity by hot wire method.
CSN 72 7306-1995 Determination of Thermal Conductivity of building materials and products
CSN 72 7010-1988 Determination of thermal conductivity coefficient for materials in stabilized thermal state. Common provisions
CSN 72 7013-1994 Determination of Steady State Thermal Conductivity of Materials. Methode of Globe
CSN 72 7011-1994 Determination of Steady State Thermal Conductivity of Materials. Methode of cylinder
CSN 70 0511-1976 Glass. Testing methods. Determination of the mean linear therroal coefficients of glass, glassceramics and cermets.
CSN 34 6312-1985 Testing of ceramic electrotechnic materials. Determination of the mean coefficient of the specific linear thermal expansion
CSN 72 5030-1973 Testing of fired ceramic materials. Definition of the specific linear thermal expansion and mean coefficient

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Plastic thermal conductivity test

GB/T 3399-1982 Test method for thermal conductivity of plastics by means of the guarded hot plate
GB/T 3139-2005 Fiber-reinforced plastics composites-Determination of thermal conductivity
GB/T 42919.1-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 1: General rules
GB/T 42919.4-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 4: Laser flash method
GB/T 42919.3-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 3: Temperature wave analysis
GB/T 32064-2015 Test method for thermal conductivity and thermal diffusivity of building materials with transient plane heat source
GB/T 5990-2006 Refractory materials. Determination of thermal conductivity. Hot-wire method
GB/T 42919.6-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 6: Comparative method based on temperature modulation technique
GB/T 17106-1997 Refractory materials--Determination of thermal conductivity--Hot-wire method (parallel)
GB/T 8722-2008 Method for the determination of thermal conductivity of graphite materials at median temperature
GB/T 32981-2016 Method for determination of equivalent thermal conductivity of wall materials
GB/T 8722-1988 Method for the determination of thermal conductivity of graphite materials at median temperature
GB/T 10297-2015 Test method for thermal conductivity of nonmetal solid materials.Hot-wire method
GB/T 10297-1998 Test method for thermal conductivity of nonmetal solid materials by hot-wire method
GB/T 7962.13-1987 Colourless optical glass test methods--Coefficient of thermal conductivity
GB 7962.13-1987 Colorless optical glass test method thermal conductivity test method
GB/T 11297.8-2015 Test method for pyroelectric coefficient of pyroelectric materials
GB/T 11297.8-1989 Test method for pyroelectric coefficient of pyroelectric materials
GB/T 36133-2018 Refractory materials.Determination of thermal conductivity (Platinum resistance thermometer method)
GB/T 20671.10-2006 Classification system and test methods for nonmetallic gasket materials-Part10:Standard practice for evaluating thermal conductivity of gasket materials
GB/T 3389.8-1986 Test methods for the properties of piezoelectric ceramics--Test for the pyroelectric coefficient
GB/T 37255-2018 Test method for pyroelectric coefficient of materials under DC bias field

International Organization for Standardization (ISO), Plastic thermal conductivity test

ISO/DIS 22007-4:2023 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Light flash method
ISO 9967:1994 Thermoplastics pipes; determination of creep ratio
ISO 9080:2003 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 9080:2012 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 4897:1985 Cellular plastics; Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
ISO 7684:1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions
ISO 17628:2015 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger
ISO 8513:2016 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the initial longitudinal tensile strength
ISO 13257:2018 Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling
ISO 8521:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the apparent initial circumferential tensile strength
ISO/PRF 8513:2023 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
ISO 8513:2023 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
ISO 11359-2:1999 Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 11359-2:2021 Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 8513:2014 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the apparent initial longitudinal tensile strength
ISO/DIS 8513 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
ISO/TR 22007-5:2011 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
ISO 8584-1:1990 Thermoplastics pipes for industrial applications under pressure; determination of the chemical resistance factor and of the basic stress; part 1: polyolefin pipes
ISO/TR 8584-2:1993 Thermoplastics pipes for industrial applications under pressure; determination of the chemical resistance factor and of the basic stress; part 2: pipes made of halogenated polymers

CEN - European Committee for Standardization, Plastic thermal conductivity test

EN ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
CEN ISO/TR 22007-5:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
PREN 15015-2014 Plastics piping systems - Hot and cold water piping components - Requirements and test/assessment methods for pipes and fittings

European Committee for Standardization (CEN), Plastic thermal conductivity test

EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)
EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2008)
EN ISO 22007-2:2022 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022)
EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
prEN ISO 22007-4 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO/DIS 22007-4:2023)
prEN ISO 22007-2:2021 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO/DIS 22007-2:2021)
EN ISO/TR 22007-5:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
prEN 743-1992 Plastics piping and ducting systems; thermoplastics pipes; determination of the longitudinal reversion
EN ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015)
prEN 638-1992 Plastics piping and ducting systems; thermoplastics pipes; determination of short-term tensile properties
EN 744:1995 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
prEN 744-1992 Plastics piping and ducting systems; thermoplastics pipes; test method for resistance to external blows by the round-the-clock-method
prEN 763-1992 Plastics piping and ducting systems; injection-moulded thermoplastics fittings; test method for visually assessing effects of heating
EN 1411:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
prEN 728-1992 Plastics piping and ducting systems; polyolefin pipes and fittings; determination of oxidation induction time
prEN 802-1992 Plastics piping and ducting systems; injection-moulded thermoplastics fittings for pressure piping systems; test methods for maximum deformation by crushing
EN 1705:1996 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
EN 727:1994 Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)
EN 1704:1997 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
EN 12119:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling
EN 761:1994 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions
PD CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity
EN 6032:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures
EN ISO 17628:2015 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger (ISO 17628:2015)
EN 1225:1996 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Creep Factor under Wet Conditions and Calculation of the Long-Term Specific Ring Stiffness
PD CEN/TR 15729:2010 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles
EN 1449:1996 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Components - Test Methods to Prove the Design of Cemented Socket-and-Spigot Joints
EN 1450:1996 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Components - Test Methods to Prove the Design of Bolted Flange Joints
EN 1862:1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment
EN 1450:1998/PRA1:1998 AMD prA1 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Components - Test Methods to Prove the Design of Bolted Flange Joints
EN 14617-11:2005 Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient
EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
EN 1448:1996 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Components - Test Methods to Prove the Design of Rigid Locked Socket-and-Spigot Joints Elastomeric Seals

Association Francaise de Normalisation, Plastic thermal conductivity test

NF EN ISO 22007-1:2017 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 1 : principes généraux
NF EN ISO 11357-8:2021 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 8 : détermination de la conductivité thermique
NF T54-021:1994 Plastics piping and ducting systems. Thermoplastics pipes. Determination of the longitudinal reversion.
NF EN 761:1994 Systèmes de canalisations plastiques - Tubes plastiques thermodurcissables renforcés de verre (PRV) - Détermination du coefficient de fluage en condition sèche.
NF X10-021:1972 Matériaux faiblement conducteurs - Détermination de la conductivité thermique - Méthode de la plaque chaude gardée avec échantillons symétriques
NF T54-036:1994 Plastics piping and ducting systems. Injection-moulded thermoplastics fitting. Test method for visually assessing effects of heating.
NF B40-316:1989 Refractory materials. Determination of thermal conductivity. Part 2 : hot-wire method (parallel).
NF T54-900*NF EN ISO 9080:2012 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
NF EN ISO 17628:2018 Reconnaissance et essais géotechniques - Essais géothermiques - Détermination de la conductivité thermique des sols et des roches dans les sondes géothermiques
NF T54-097:1995 Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the-clock method.
NF EN ISO 580:2005 Systèmes de canalisations et de gaines en plastiques - Raccords thermoplastiques moulés par injection - Méthodes d'essai pour estimer visuellement les effets de la chaleur
NF T54-045*NF EN 802:1994 Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing.
NF EN ISO 19892:2018 Systèmes de canalisations en plastiques - Tubes en matières thermoplastiques et raccords pour l'eau chaude et froide - Méthode d'essai de la résistance des assemblages aux cycles de pression
NF T76-320*NF EN ISO 15908:2003 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
NF ISO 16957:2018 Détermination de la conductivité thermique apparente des matériaux de construction poreux et mouillés par une méthode périodique
NF EN 1705:1997 Systèmes de canalisations en plastique - Robinets en thermoplastiques - Méthode d'essai pour la vérification d'un robinet après un choc externe.
NF T54-425:2009 Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods.
NF EN 12119:1997 Systèmes de canalisations en plastiques - Robinets en polyéthylène (PE) - Méthode d'essai de résistance aux cycles thermiques.
NF T54-078:1992 Plastics. Polyethylene (pe) for plastics piping systems. Determination of the limiting stress intensity factor. Test method.
XP CEN/TS 1159-4:2005 Céramiques techniques avancées - Composites céramiques, propriétés thermophysiques - Partie 4 : détermination de la conductivité thermique
NF EN ISO 8894-1:2010 Matériaux réfractaires - Détermination de la conductivité thermique - Partie 1 : Méthodes du fil chaud ("croisillon" et "thermomètre à résistance")
NF B10-639*NF EN 14581:2005 Natural stone test method - Determination of linear thermal expansion coefficient
NF EN 993-15:2005 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 15 : détermination de la conductivité thermique par la méthode du fil chaud (parallèle)
FD CEN/TR 15729:2011 Systèmes de canalisations en plastique - Plastiques thermodurcissables renforcés par du verre (PRV) à base de résine de polyester non saturé (UP) - Rapport sur la détermination de l'abrasion moyenne après un nombre défini de cycles d'essai
NF EN 802:1994 Systèmes de canalisations et de gaines en plastiques - Raccords thermoplastiques moulés par injection pour canalisations avec pression - Méthode d'essai de déformation maximale par écrasement.
NF EN 62047-11:2014 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 11 : méthode d'essai pour les coefficients de dilatation thermique linéaire des matériaux autonomes pour systèmes microélectromécaniques
NF T57-229:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment.
NF T57-212*NF EN 761:1994 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor dry conditions.
FD T57-233*FD CEN/TR 15729:2011 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles
NF T57-217:1996 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness.
NF B10-602-11*NF EN 14617-11:2005 Agglomerated stone - Test methods - Part 11 : determination of linear thermal expansion coefficient.
NF C26-251:1980 Méthodes d'essai des matières isolantes - Méthode de mesure des coefficients de frottement des films et feuilles de matière plastique utilisés comme isolants électriques.
NF T56-118:1980 Rigid cellular products with rubber or plastic base. Shearing test. Determination of apparent shearing coefficient.

Korean Agency for Technology and Standards (KATS), Plastic thermal conductivity test

KS M 3060-1993 Testing method for coefficient of linear thermal expansion of plastics
KS L 3306-2007 Testing method for thermal conductivity of firebricks by hot wire
KS M 3040-2011 Test method for coefficient of cubical thermal expansion of plastics
KS M 3040-1981 Test method for coefficient of cubical thermal expansion of plastics
KS M ISO 23559:2014 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS M ISO 23559:2019 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS L 9016-2010 Test methods for thermal transmission properties of thermal insulations
KS M 6773-2009 Testing method for volume resistivity of electrically conductive rubber and plastic materials
KS M ISO 13968:2008 Plastics piping and ducting systems-Thermoplastics pipes-Determination of ring flexibility
KS M ISO 13968:2015 Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
KS M 3706-2008(2013) Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
KS M 3040-2016(2021) Test method for coefficient of cubical thermal expansion of plastics
KS M ISO 2505-2014(2019) Thermoplastics pipes — Longitudinal reversion — Test method and parameters
KS M ISO 2505:2014 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
KS M 3706-2008 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
KS M 3009-2001 Testing methods for coefficients of friction of plastic film
KS M 3009-1986 Testing methods for coefficients of friction of plastic film
KS M ISO TR 9080:2015 Thermoplastics pipes for the transport of fluids--Methods of extrapolation of hydrostatic stress rupture data to determine the long--term hydrostatics strength of thermoplastics pipe materials
KS M ISO TR 9080:2003 Thermoplastics pipes for the transport of fluids-Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatics strength of thermoplastics pipe materials
KS M 3040-2016 Test method for coefficient of cubical thermal expansion of plastics
KS L 3515-2004(2009) Testing method for the rate of linear change of high alumina and fire clay plastic refractories
KS L ISO 8894-2-2016(2021) Refractory materials-Determination of thermal conductivity-Part2:Hot-wire methods(parallel)
KS L 1604-2002 Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS M 3053-1990(2001) TESTING METHOD FOR STATIC AND KINETIC COEFFICIENTS OF FRICTION OF PLASTIC FILMS AND SHEETS
KS M ISO 4897-2002(2022) Cellular plastics－Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
KS M ISO 4897-2002(2017) Cellular plastics－Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
KS M 3053-2002 TESTING METHOD FOR STATIC AND KINETIC COEFFICIENTS OF FRICTION OF PLASTIC FILMS AND SHEETS
KS M ISO 8521:2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial circumferential tensile strength
KS M ISO 10466:2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test method to prove the resistance to initial ring deflection
KS M ISO 11359-2:2002 Plastics－Thermomechanical analysis(TMA)－Part 2：Determination of coefficient of linear thermal expansion and glass transition temperature
KS M ISO 11359-2-2002(2017) Plastics－Thermomechanical analysis(TMA)－Part 2：Determination of coefficient of linear thermal expansion and glass transition temperature
KS M ISO 11359-2-2002(2022) Plastics－Thermomechanical analysis(TMA)－Part 2：Determination of coefficient of linear thermal expansion and glass transition temperature
KS L ISO 8894-1-2016(2021) Refractory materials-Determination of thermal coductivity-Part 1:Hot-wire methods(cross-array and resistance thermometer
KS C IEC 60648-2014(2019) Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation
KS M ISO 8513-2017(2022) Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial longitudinal tensile strength
KS M ISO 12987-2010(2020) Carbonaceous material for the production of aluminium－Anodes,cathodes blocks, sidewall blocks and baked ramming pastes－Determination of the thermal conductivity using a comparative method

RO-ASRO, Plastic thermal conductivity test

STAS SR ISO 3915:1981 Plastics. Measurement of resistivity of conductive plastics
SR EN 638-1996 Plastics piping and ducting systems - Thermoplastics pipes-Determination of tensile properties
SR EN 763-1996 Plastics piping and ducting systems - injection-moulded thermoplastics fittings - Test method for visually assessing effects of heating
STAS SR EN 803-1996 Plastics pipirig systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure pipirig - Test method for resistence to a short-term internai pressure without end thrust

Danish Standards Foundation, Plastic thermal conductivity test

DS/EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
DS/EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
DS/EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method
DS/EN ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
DS/EN 744:1996 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
DS/EN 14982+A1:2011 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
DS/EN ISO 9080:2013 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
DS/EN 761:1995 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions
DS/EN 993-15:2005 Methods of test for dense shaped refractory products - Determination of thermal conductivity by the hot-wire (parallel) method
DS/EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer)
DS/CEN/TR 15729:2011 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles
DS/EN 62047-11:2013 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems

RU-GOST R, Plastic thermal conductivity test

GOST 34374.2-2017 Plastics. Determination of thermal conductivity and thermal diffusivity. Part 2. Transient plane heat source (hot disc) method
GOST 15173-1970 Plastics. Method for determination of mean coefficient of linear thermal expansion
GOST R 54254-2010 Carbon materials. Test method for thermal conductivity at room temperature
GOST 32618.2-2014 Plastics. Thermomechanical analysis (TMA). Part 2. Determination of coefficient of linear thermal expansion and glass transition temperature
GOST R 56466-2015 Space systems. Materials test methods. Method of determining the linear thermal expansion coefficient composites at high temperatures

British Standards Institution (BSI), Plastic thermal conductivity test

BS EN ISO 22007-2:2022 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient plane heat source (hot disc) method
BS EN ISO 9967:1995 Thermoplastics pipes - Determination of creep ratio
20/30394870 DC BS EN ISO 11357-8. Plastics. Differential scanning calorimetry. Part 8. Determination of thermal conductivity
BS EN 743:1995 Plastics piping and ducting systems - Thermoplastics pipes - Determination of the longitudinal reversion
BS ISO 23794:2023 Tracked Changes. Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance
BS EN 1411:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
BS EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Hot-wire methods (cross-array and resistance thermometer)
BS ISO 18555:2016 Metallic and other inorganic coatings. Determination of thermal conductivity of thermal barrier coatings
21/30429632 DC BS EN ISO 2505. Thermoplastics pipes. Longitudinal reversion. Test method and parameters
BS EN 761:1995 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under dry conditions
BS EN 1705:1997 Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow
BS EN 744:1996 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
BS ISO 24449:2021 Metallic and other inorganic coatings. Determination of thermal conductivity of thermal barrier coatings at elevated temperature
BS EN ISO 15908:2003 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
BS EN ISO 15908:2002 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
BS 2782-11 Method 1121C:1997 Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series
BS EN ISO 19892:2018 Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
BS ISO 16957:2016 Measurement of apparent thermal conductivity of wet porous building materials by a periodic method
BS EN ISO 17628:2015 Geotechnical investigation and testing. Geothermal testing. Determination of thermal conductivity of soil and rock using a borehole heat exchanger
BS 874-3.2:1990 Methods for determining thermal insulating properties - Tests for thermal transmittance and conductance - Calibrated hot-box method
BS EN ISO 19893:2018 Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling
BS ISO 11359-2:1999 Plastics - Thermomechanical analysis (TMA) - Determination of coefficient of linear thermal expansion and glass transition temperature
PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Results of interlaboratory testing of poly(methyl methacrylate) samples
BS 2782 Pt.8 Method 824A:1984 Methods of testing plastics. Other properties. Determination of coefficients of friction of plastics film
BS EN 14617-11:2005 Agglomerated stone - Test methods - Determination of linear thermal expansion coefficient
BS EN 1226:1996 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method to prove the resistance to initial ring deflection
BS ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
BS EN 1862:1998 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment
BS EN 14581:2005 Natural stone test methods - Determination of linear thermal expansion coefficient
BS EN 14581:2004(2005) Natural stone test methods - Determination of linear thermal expansion coefficient
BS PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Results of interlaboratory testing of poly(methyl methacrylate) samples
BS EN ISO 22007-2:2015 Plastics. Determination of thermal conductivity and thermal diffusivity. Transient plane heat source (hot disc) method
BS 874-3.1:1987 Methods for determining thermal insulating properties - Tests for thermal transmittance and conductance - Guarded hot-box method
BS 2782-6 Method 621C:1983 Methods of testing plastics - Dimensional properties - Determination of the bulk factor of moulding materials
BS EN 1704:1997 Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending
BS ISO 11359-2:2021 Tracked Changes. Plastics. Thermomechanical analysis (TMA). Determination of coefficient of linear thermal expansion and glass transition temperature
BS ISO 8513:2014 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the apparent initial longitudinal tensile strength
BS ISO 8513:2023 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the initial longitudinal tensile strength
18/30372182 DC BS EN IEC 61189-2-801. Test methods for electrical materials, printed board and other interconnection structures and assemblies. Part 2-801. Thermal conductivity test for base materials
BS 1902-5.5:1991 Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal conductivity (panel/calorimeter method) (method 1902-505)
BS 1902 Sec.5.5:1991 Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (panel/calorimeter method) (method 1902-505)
21/30427384 DC BS ISO 11359-2. Plastics. Thermomechanical analysis (TMA). Part 2. Determination of coefficient of linear thermal expansion and glass transition temperature
BS ISO 8513:2016 Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the initial longitudinal tensile strength
BS EN IEC 60749-20:2020 Semiconductor devices. Mechanical and climatic test methods - Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat
BS PD CEN/TR 15729:2010 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) — Report on the determination of mean abrasion after a defined number of test cycles

AT-ON, Plastic thermal conductivity test

ONORM C 9515-1982 Testing of plastics; Determination of the Melt-Flow-Index of tbermoplastics
ONORM M 7861 Teil.2-1987 Testing of welded joints in thermoplastics; tensile lest, short Urne welding coefficient
OENORM EN ISO 22007-2:2021 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO/DIS 22007-2:2021)
ONORM M 7861 Teil.3-1987 Testing of welded joints in thermoplastics; impact tensile test, short time welding coefficient
ONORM B 6015-2-2000 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the specific thermal conductivity in building materials
ONORM B 6015 Teil.5-1990 Determination of thermal conductivity by the guarded hot plate apparatus; determination of the nominal value of the thermal conductivity for insulation materials
ONORM B 6015-6-1992 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the nominal value of the thermal conductivity for mineralic building materials
ONORM B 6015 Teil.1-1989 Determination of the thermal conductivity by tbe guarded hot plate apparatus; test procedure and evaluation of results
ONORM B 6015 Teil.3-1991 Determination of thermal conductivity by the guarded hot plate apparatus — Use of values of laminated materials on bmlding application

German Institute for Standardization, Plastic thermal conductivity test

DIN EN ISO 22007-6:2015-05 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014); German version EN ISO 22007-6:2015
DIN 53752:1980 Testing of plastics; determination of the coefficient of linear thermal expansion
DIN EN ISO 22007-4:2017-11 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017); German version EN ISO 22007-4:2017
DIN EN ISO 22007-2:2022-09 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022); German version EN ISO 22007-2:2022
DIN EN ISO 22007-3:2012-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012
DIN EN ISO 11357-8:2021-05 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021); German version EN ISO 11357-8:2021
DIN EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2008); German version EN ISO 22007-2:2012
DIN EN ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015); German version EN ISO 22007-2:2015
DIN EN ISO 2505:2005-08 Thermoplastics pipes - Longitudinal reversion - Test methods and parameters (ISO 2505:2005); German version EN ISO 2505:2005 / Note: To be replaced by DIN EN ISO 2505 (2021-07).
DIN EN ISO 22007-1:2018 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017); German version EN ISO 22007-1:2017
DIN EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009); German version EN ISO 22007-1:2012
DIN EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2008); German version EN ISO 22007-4:2012
DIN EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017); German version EN ISO 22007-4:2017
DIN 50003:2023-08 Adhesive bondings in electronic applications - Determination of thermal conductivity of materials for heat dissipation / Note: Date of issue 2023-06-30
DIN EN ISO 2505:2021-07 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO/DIS 2505:2021); German and English version prEN ISO 2505:2021 / Note: Date of issue 2021-06-04*Intended as replacement for DIN EN ISO 2505 (2005-08).
DIN EN 761:1994-08 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions; German version EN 761:1994 / Note: To be replaced by DIN EN ISO 10468 (2022-08).
DIN EN 1705:1997-01 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow; German version EN 1705:1996
DIN EN ISO 19892:2018-12 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011); German version EN ISO 19892:2018
DIN EN ISO 13263:2018-01 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010); German version EN ISO 13263:2017
DIN EN ISO 17628:2015-12 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger (ISO 17628:2015); German version EN ISO 17628:2015
DIN 52612-2:1984 Tesing of thermal insulating materials; determination of thermal conductivity by means of the guarded hot plate apparatus; conversion of the measured values for building applications
DIN EN 1704:1997-03 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997
DIN EN ISO 19893:2018-12 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011); German version EN ISO 19893:2018
DIN EN 761:1994 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions; German version EN 761:1994
DIN EN 1979:1999 Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam; German version EN 1979:1999
DIN EN ISO 13254:2018 Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
DIN EN ISO 13056:2018-12 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011); German version EN ISO 13056:2018
DIN CEN/TS 1159-4:2004-10 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity; German version CEN/TS 1159-4:2004
DIN 51909:1998 Testing of carbon materials - Determination of coefficient of linear thermal expansion - Solid materials
DIN EN 14581:2005 Natural stone test methods - Determination of linear thermal expansion coefficient; German version EN 14581:2004
DIN EN ISO 13264:2018-01 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010); German version EN ISO 13264:2017
DIN EN 993-15:2005-07 Methods of test for dense shaped refractory products - Part 15: Determination of thermal conductivity by the hot-wire (parallel) method; German version EN 993-15:2005
DIN CEN/TR 15729:2010-11*DIN SPEC 1188:2010-11 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles; German version CEN/TR 15729:2010
DIN EN ISO 13257:2019 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
DIN EN ISO 13257:2018 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2010)
DIN CEN ISO/TR 22007-5:2014-11*DIN SPEC 53367:2014-11 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011); German version CEN ISO/TR 22007-5:2014
DIN EN ISO 9080:2013 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012); German and English version EN ISO 9080:2012
DIN EN 1704:1997 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997
DIN EN ISO 15908:2003 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesive (ISO 15908:2002); German version EN ISO 15908:2002
DIN EN 62047-11:2014-04 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems (IEC 62047-11:2013); German version EN 62047-11:2013
DIN EN ISO 13264:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
DIN EN 12256:1998 Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings; German version EN 12256:1998
DIN EN ISO 13255:2018-01 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010); German version EN ISO 13255:2017
DIN EN ISO 8894-1:2010-10 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010); German version EN ISO 8894-1:2010
DIN EN 14617-11:2005 Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient; German version EN 14617-11:2005
DIN EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
DIN EN ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)

ES-UNE, Plastic thermal conductivity test

UNE-EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014)
UNE-EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
UNE-EN ISO 19892:2019 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
UNE-EN ISO 13263:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
UNE-EN ISO 19893:2019 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
UNE-EN ISO 13056:2019 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
UNE-EN ISO 13264:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
UNE-EN 62047-11:2013 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems (Endorsed by AENOR in November of 2013.)
UNE-EN ISO 13255:2018 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)

AENOR, Plastic thermal conductivity test

UNE-EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
UNE-EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
UNE 53126:2014 Plastics. Determination of coefficient of linear thermal expansion
UNE-EN 744:1996 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
UNE-EN ISO 2505:2006 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
UNE-EN 917:1997 PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHODS FOR RESISTANCE TO INTERNAL PRESSURE AND LEAKTIGHTNESS.
UNE-EN 14982:2007+A1:2011 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
UNE-EN 761:1995 PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE CREEP FACTOR UNDER DRY CONDITIONS.
UNE-EN 1705:1998 PLASTIC PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHOD FOR THE INTEGRITY OF A VALVE AFTER AN EXTERNAL BLOW.
UNE-EN 1704:1997 PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHOD FOR THE INTEGRITY OF A VALVE AFTER TEMPERATURE CYCLING UNDER BENDING.
UNE-EN 993-15:2005 Methods of test for dense shaped refractory products - Determination of thermal conductivity by the hot-wire (parallel) method
UNE-EN 12119:1997 PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) VALVES. TEST METHOD FOR RESISTANCE TO THERMAL CYCLING.
UNE-EN 12294:2000 PLASTICS PIPING SYSTEMS. SYSTEMS FOR HOT AND COLD WATER. TEST METHOD FOR LEAKTIGHTNESS UNDER VACUUM
UNE 21376:1986 METHOD OF TEST FOR COEFFICIENTS OF FRICTION OF PLASTIC FILM AND SHEETING FOR USE AS ELECTRICAL INSULATION.
UNE-CEN/TR 15729:2014 IN Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles
UNE-EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
UNE 26493-2:2001 Road vehicles. Thermoplastics tubing for air braking systems. Part 2: Mounting on vehicle and test methods.
UNE-EN 1229:1996 PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES AND FITTINGS. TEST METHODS TO PROVE THE LEAKTIGHTNESS OF THE WALL UNDER SHORT-TERM INTERNAL PRESSURE.

Lithuanian Standards Office , Plastic thermal conductivity test

LST EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2008)
LST EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
LST EN 744-2001 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
LST EN ISO 2505:2005 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
LST EN 14982-2006+A1-2010 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
LST EN 761+AC-2002 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions
LST EN 993-15-2005 Methods of test for dense shaped refractory products - Determination of thermal conductivity by the hot-wire (parallel) method
LST EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)

KR-KS, Plastic thermal conductivity test

KS M ISO 23559-2019 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS M ISO 8513-2017 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial longitudinal tensile strength
KS M ISO 8521-2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial circumferential tensile strength
KS M ISO 10466-2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test method to prove the resistance to initial ring deflection

IT-UNI, Plastic thermal conductivity test

国家市场监督管理总局、中国国家标准化管理委员会, Plastic thermal conductivity test

GB/T 8722-2019 Test method for thermal conductivity of carbon materials
GB/T 5990-2021 Refractory materials—Determination of thermal conductivity, specific heat capacity and thermal diffusivity(hot-wire method)
GB/T 37796-2019 Insulation refractories—Determination of thermal conductivity（calorimeter）
GB/T 36800.2-2018 Plastics—Thermomechanical analysis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

未注明发布机构, Plastic thermal conductivity test

DIN EN ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
BS EN 761:1995(1999) Plastics piping systems — Glass - reinforced thermosetting plastics (GRP) pipes — Determination of the creep factor under dry conditions
BS 1902-5.5:1991(2009) Methods of testing Refractory materials — Part 5 : Refractory and thermal properties — Section 5.5 Determination of thermal conductivity (panel / calorimeter method) (method 1902 - 505)
DIN EN ISO 19629:2022 High-performance ceramics – Thermophysical properties of ceramic composite materials – Determination of one-dimensional thermal conductivity using flash methods
BS EN 1225:1996 Plastics piping systems - Glass - reinforced thermosetting plastics ( GRP ) pipes - Determination of the creep factor under wet conditions and calculation of the long - term specific ring stiffness

Japanese Industrial Standards Committee (JISC), Plastic thermal conductivity test

JIS A 1412:1994 Test methods for thermal transmission properties of thermal insulations
JIS K 7197:1991 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
JIS K 6269:1998 Testing method of flammability using the oxygen index method for rubber, vulcanized or thermoplastic
JIS K 6269 AMD 1:2011 Testing method of flammability using the oxygen index method for rubber, vulcanized or thermoplastic (Amendment 1)
JIS K 7197 AMD 1:2012 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis (Amendment 1)

BE-NBN, Plastic thermal conductivity test

NBN EN 743-1994 Plastics piping and ducting systems - Thermoplastics pipes - Determination of the longitudinal reversion
NBN EN 761-1994 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under dry conditions

PT-IPQ, Plastic thermal conductivity test

NP 2120-1986
NP EN 917-2000 Plastics piping systems Thermoplastics valves Test methods for resistance to internal pressure and leaktightness
NP EN 1862-2002 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes Determination of the relative flexural creep factor following exposure to a chemical environment
NP 116-1962
NP EN 1449-2000 Plastics piping systems Glass-reinforced thermosetting plastics(GRP)components Test methods to prove the design of cemented socket-and-spigot joints
NP EN 1448-2000 Plastics piping systems Glass-reinforced thermosetting plastics(GRP)components Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals
NP EN 1450/A1-2000 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) components Test methods to prove the design of bolted flange joints
NP EN 1229-2001 Plastics piping systems Glass-reinforced thermosetting plastics(GRP) pipes and fittings Test methods to prove the leaktightness of the wall under short-term internal pressure

Jiangsu Provincial Standard of the People's Republic of China, Plastic thermal conductivity test

DB32/T 3596-2019 Determination of thermal diffusivity and thermal conductivity of graphene materials by flash method

American Society for Testing and Materials (ASTM), Plastic thermal conductivity test

ASTM D864-52(1978) Method of Test for Coefficient of Cubical Thermal Expansion of Plastics
ASTM D5930-17 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM D696-98 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30176C and 30176C With a Vitreous Silica Dilatometer
ASTM D6341-13 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between ndash;30 and 140deg;F (ndash;34.4 and 60deg;C)
ASTM D5930-09 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM C1667-15 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
ASTM D6341-14 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between ndash;30 and 140deg;F 40;ndash;34.4 and 60deg;C41;
ASTM E1952-01 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-06 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-98 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM D6341-21 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)
ASTM D6341-10 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140&176F (-34.4 and 60&176C)
ASTM D6341-14a Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F &40;–34.4 and 60°C&41;
ASTM D6341-16 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between &x2013;30 and 140&xb0;F (&x2013;34.4 and 60&xb0;C)
ASTM D696-16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between &x2212;30&xb0;C and 30&xb0;C with a Vitreous Silica Dilatometer
ASTM D1494-97(2001)e1 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
ASTM D1494-97(2001) Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
ASTM D6341-98 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140176F (-34.4 and 60176C)
ASTM D6341-98(2005) Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140176F (-34.4 and 60176C)
ASTM D6095-06 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D6095-12 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D6095-12(2018) Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D6095-12(2023) Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D5927-17 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
ASTM D1894-08 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
ASTM E1623-11 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E1623-03a Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E1623-03 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM D696-08e1 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
ASTM E1623-22 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)

TR-TSE, Plastic thermal conductivity test

TS 389-1966 DETERMINATION OF THERMAL CONDUCTIVf?Y BY THE TUBE METHOD
TS 388-1977 Determination of Thermal Coadnctivity By a Plate Testing Apparatus

Association of German Mechanical Engineers, Plastic thermal conductivity test

DVS 2201-1 Beiblatt 3-2004 Testing of semi-finished products made of thermoplastics - Basics - Indications - Linear thermal expansion coefficients
DVS 2201-1 Beiblatt 3-2003 Testing of semifinished products made of thermoplastics - Basics - Indications; Linear thermal expansion coefficients
DVS 2216-1 Beiblatt 1-2004
DVS 2216-1 Beiblatt 1-2005 DVS test specimens with an energy director for the ultrasonic welding of thermoplastics and testing conditions
DVS 2203-1 Beiblatt 2-2005
DVS 2203-1 Beiblatt 2-2003
DVS 2203-1 Beiblatt 2-2014
DVS 2203-1 Beiblatt 1-2009
DVS 2203-1 Beiblatt 1-2005
DVS 2203-1 Beiblatt 1-2010 Testing of welded joints between panels and pipes made of thermoplastics - Requirements in the tensile test - Short-time tensile welding factor fz
DVS 2203-1 Beiblatt 1-2006 Testing of welded joints between panels and pipes made of thermoplastics - Requirements in the tensile test - Short-time tensile welding factor fz
DVS 2203-1 Beiblatt 2-2006 Testing of welded joints between panels and pipes made of thermoplastics - Requirements in the tensile creep test (Tensile creep welding factor fs)
DVS 2210-1 Beiblatt 2-2004 Industrial piping made of thermoplastics - Design and execution - Above-ground pipe systems - Recommendations for the internal pressure and leak tests
DVS 2203-1 Beiblatt 2-2009

Taiwan Provincial Standard of the People's Republic of China, Plastic thermal conductivity test

CNS 7333-1981 Method of Determination for Thermal Conductivity of Heat Insulating Materials by Means of the Guarded Hot Plate
CNS 7332-1981 Method of Determination for Thermal Conductivity of Heat Insulating Materials by Means of Comparison with a Standard Plate of Known Conductivity
CNS 7230-1981 Room Temperature Resistivity Measurements on Thermoelectric Materials
CNS 7629-1981 Method of Test for Change of Resistance with Temperature of Metallic Materials for Electrical Heating

IN-BIS, Plastic thermal conductivity test

Professional Standard - Aviation, Plastic thermal conductivity test

HB 5367.9-1986 Test method for thermal conductivity of carbon graphite sealing materials

HU-MSZT, Plastic thermal conductivity test

MSZ 11683-1970

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Plastic thermal conductivity test

ASHRAE MN-00-2-2-2000 Measurement of Thermal Conductivity for Three Borehole Fill Materials Used for GSHP

Sichuan Provincial Standard of the People's Republic of China, Plastic thermal conductivity test

DB51/T 2434-2017 Transient Measurement of Material Thermal Conductivity and Thermal Diffusivity—Pulse Method

NL-NEN, Plastic thermal conductivity test

NEN 2444-1991 Determination of the heat resistance and/or the heat transfer co?ffici?nt for building and insulation materials

API - American Petroleum Institute, Plastic thermal conductivity test

API PUBL 935-1999 Thermal Conductivity Measurement Study of Refractory Castables (First Edition)

CU-NC, Plastic thermal conductivity test

NC 30-68-1988 Plastics Industry. Determination of Coefficients of Static and Dynamic Friction of Plastic Films. Testing Methods

Professional Standard - Ferrous Metallurgy, Plastic thermal conductivity test

YB/T 4130-2005 Refractory materials Determination of thermal conductivity (calorimeter)

American National Standards Institute （ANSI), Plastic thermal conductivity test

ANSI/ASTM D5930:2001 Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ANSI/ASTM D6095:2012 Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ANSI/ASTM D6341:1998 Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes between -30o and 140oF (-34.4o and 60oC)
ANSI/ASTM E1623:2011 TEST METHOD FOR DETERMINATION OF FIRE AND THERMAL PARAMETERS OF MATERIALS, PRODUCTS, AND SYSTEMS USING AN INTERMEDIATE SCALE CALORIMETER (ICAL)
ANSI/ASTM E1623:2009 Test Method For Determination Of Fire And Thermal Parameters Of Materials, Products, And Systems Using An Intermediate Scale Calorimeter Ical

SE-SIS, Plastic thermal conductivity test

SIS SS IEC 648:1983 Methodof test for coefficients offriction of plastic film and sheeting for use as electrical insulation

GOSTR, Plastic thermal conductivity test

GOST R 57967-2017 Composites. Determination of thermal conductivity by stationary one-dimensional heat flow heater with a guard
GOST R 57783-2017 Fiberglass-reinforced thermosetting plastic pipes. Determination of creep factor under dry condition
GOST R 58023-2017 Composite nanomaterials. Thermoplastic polymers modified by nanosilicates. Parameters and test methods

工业和信息化部, Plastic thermal conductivity test

JC/T 2399-2017 Test method for pyroelectric coefficient of materials under bias electric field

YU-JUS, Plastic thermal conductivity test

JUS N.A5.140-1990 Testing of insuiating materials for electrical purposes. Method of test for coefficients ofstatic and ki- nematic friction of plastic films and sheeting
JUS U.A2.020-1983 Testing of buildings materials. Determination of heat conductance coefficient. Ileat plate method

Standard Association of Australia （SAA）, Plastic thermal conductivity test

AS/NZS 1660.2.3:1998 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials
AS/NZS 1462.29:2019 Methods of test for plastic pipes and fittings, Method 29: Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

International Electrotechnical Commission (IEC), Plastic thermal conductivity test

IEC TR 60648:1979 Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation

FI-SFS, Plastic thermal conductivity test

SFS-ISO 4897:1987 This standard is approved in English

US-FCR, Plastic thermal conductivity test

FCR COE CRD-C 125-63-1963 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST FOR COEFFICIENT OF LINEAR THERMAL EXPANSION OF COARSE AGGREGATE (STRAIN-GAGE METHOD)

European Committee for Electrotechnical Standardization（CENELEC）, Plastic thermal conductivity test

EN 62047-11:2013 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems

CH-SNV, Plastic thermal conductivity test

SN EN ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Plastic thermal conductivity test

PREN 6039-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of the Exothermic Reaction During Curing of Prepreg Material (Edition P1)