ZH
RU
ES

Plastic digestion method

Plastic digestion method, Total:495 items.

In the international standard classification, Plastic digestion method involves: Plastics, Environmental protection, Raw materials for rubber and plastics, Geology. Meteorology. Hydrology, Wastes, Insulating materials, Analytical chemistry, Rubber and plastics products, Reinforced plastics, Water quality, Animal feeding stuffs, Products of the textile industry, Electricity. Magnetism. Electrical and magnetic measurements, Protection against fire, Insulating fluids, Road vehicles in general, Nuclear energy engineering, Pipeline components and pipelines, Fertilizers, Materials and articles in contact with foodstuffs, Valves, Motor cycles and mopeds, Equipment for the rubber and plastics industries, Chipless working equipment, Road vehicle systems, Pulps, Internal combustion engines for road vehicles, Packaging and distribution of goods in general, Fuels, Pesticides and other agrochemicals, Cases. Boxes. Crates, Construction materials, Equipment for the chemical industry, Packaging materials and accessories, Materials for the reinforcement of composites, Energy and heat transfer engineering in general, Non-ferrous metals, Welding, brazing and soldering, Farming and forestry, Rubber.

International Organization for Standardization (ISO), Plastic digestion method

ISO 13975:2019 Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production
ISO 13975:2012 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems - Method by measurement of biogas production
ISO 10210:2012 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
ISO/FDIS 5430 Plastics — Ecotoxicity testing scheme for soluble decomposition intermediates from biodegradable plastic materials and products used in the marine environment — Test methods and requirements
ISO 23832:2021 Plastics - Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
ISO 14853:2005 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
ISO 14853:2016 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
ISO 5430:2023 Plastics — Ecotoxicity testing scheme for soluble decomposition intermediates from biodegradable plastic materials and products used in the marine environment — Test methods and requirements
ISO 15985:2004 Plastics - Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
ISO 5148:2022 Plastics — Determination of specific aerobic biodegradation rate of solid plastic materials and disappearance time (DT50) under mesophilic laboratory test conditions
ISO 21475:2019 Plastics — Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation
ISO/DIS 6775:2023 Plastics — Plastics identification using Raman spectrometric methods
ISO/CD TS 23947-2.2 Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics
ISO 15985:2004/Cor 1:2007 Plastiques - ?valuation de la biodégradation anaérobie ultime et de la désintégration dans des conditions de digestion anaérobie à teneur élevée en solides - Méthode par analyse du biogaz libéré RECTIFICATIF TECHNIQUE 1
ISO 19679:2016 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide
ISO 14853:2005/cor 1:2009 Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production TECHNICAL CORRIGENDUM 1
ISO 15985:2014 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
ISO 23977-1:2020 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1: Method by analysis of evolved carbon dioxide
ISO 18830:2016 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer
ISO 23977-2:2020 Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater — Part 2: Method by measuring the oxygen demand in closed respirometer
ISO 8233:1988 Thermoplastics valves; torque; test method
ISO/DIS 8233 Thermoplastics valves — Torque — Test method
ISO/FDIS 8233:2023 Thermoplastics valves — Torque — Test method
ISO 18280:2005 Plastics - Epoxy resins - Test methods
ISO 18280:2010 Plastics - Epoxy resins - Test methods
ISO/TR 13883:1995 Plastics - Guide to the writing of test methods
ISO/R 1183:1970 Plastics — Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics
ISO 175:1999 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 20819-2:2023 Plastics — Wood-plastic recycled composites (WPRC) — Part 2: Test methods
ISO 8659:1989 Thermoplastics valves; fatigue strength; test method
ISO 8659:2020 Thermoplastics valves — Fatigue strength — Test method
ISO 23517:2021 Plastics - Soil biodegradable materials for mulch films for use in agriculture and horticulture - Requirements and test methods regarding biodegradation, ecotoxicity and control of constituents

Professional Standard - Commodity Inspection, Plastic digestion method

SN/T 3008-2011 Determination of cadmium content in plastics and plastics products for import and export. Wet decomposition method

Standard Association of Australia （SAA）, Plastic digestion method

AS 4828.4:2008 Degradability of plastics - Methods of test - Test method for heat aging of degradable plastics
AS 4828.1:2009
AS 4828.2:2008 Degradability of plastics - Methods of test - Determination of brittle point in plastic film using a tensile elongation test
AS/NZS 2433:1994 Plastics - Method for exposure to ultraviolet lamps
AS 1141.25.3:2003(R2013)
AS 1141.25.2:2003(R2013)

British Standards Institution (BSI), Plastic digestion method

BS ISO 13975:2012 Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems. Method by measurement of biogas production
BS EN ISO 10210:2017 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
BS EN ISO 11468:2000 Plastics - Preparation of PVC pastes for test purposes - Dissolver method
BS EN ISO 11468:1998 Plastics. Preparation of PVC pastes for test purposes. Dissolver method
BS ISO 13975:2019 Tracked Changes. Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems. Method by measurement of biogas production
BS EN 61234-1:1994 Method of test for hydrolytic stability of electrical insulating materials. Method of test for hydrolytic stability of electrical insulating materials. Plastic films
BS EN 1122:2001 Plastics - Determination of cadmium - Wet decomposition method
22/30427258 DC BS ISO 5430. Plastics. Marine ecotoxicity testing scheme for biodegradable plastic materials. Test methods and requirements
BS EN 14995:2006 Plastics - Evaluation of compostability - Test scheme and specifications
BS EN 14995:2007 Plastics. Evaluation of compostability. Test scheme and specifications
BS ISO 23832:2021 Plastics. Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
20/30393744 DC BS ISO 23832. Plastics. Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
BS EN ISO 14853:2017 Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system. Method by measurement of biogas production
BS ISO 5430:2023 Plastics. Ecotoxicity testing scheme for soluble decomposition intermediates from biodegradable plastic materials and products used in the marine environment. Test methods and requirements
BS ISO 5148:2022 Plastics. Determination of specific aerobic biodegradation rate of solid plastic materials and disappearance time (DT50) under mesophilic laboratory test conditions
BS ISO 15985:2004 Plastics - Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
BS EN ISO 23977-1:2021 Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater - Method by analysis of evolved carbon dioxide
BS EN ISO 15985:2017 Plastics. Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions. Method by analysis of released biogas
BS ISO 23977-2:2020 Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Method by measuring the oxygen demand in closed respirometer
BS ISO 14853:2005 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
BS ISO 14853:2016 Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system. Method by measurement of biogas production
21/30425879 DC BS ISO 5148. Plastics. Determination of specific aerobic biodegradation rate of solid plastic materials and disappearance time (DT50) under mesophilic laboratory test conditions
BS ISO 23977-1:2020 Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Method by analysis of evolved carbon dioxide
BS EN ISO 19679:2020 Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
BS ISO 20819-2:2023 Plastics. Wood-plastic recycled composites (WPRC) - Test methods
BS 2782-0:2011 Methods of testing plastic. Introduction
BS ISO 15985:2014 Plastics. Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions. Method by analysis of released biogas
BS EN ISO 23977-2:2021 Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater - Method by measuring the oxygen demand in closed respirometer
BS EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products
BS 2782-1 Methods 134A and 134B:1992 Methods of testing plastics - Thermal properties - Determination of the oxidation induction time of thermoplastics
BS 2782-3 Method 360C:1991 Methods of testing plastics - Mechanical properties - Determination of tear resistance of plastics film and sheeting by the initiation method
BS ISO 18830:2016 Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface. Method by measuring the oxygen demand in closed respirometer
BS ISO 19679:2016 Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
19/30399400 DC BS EN ISO 19679. Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
20/30399388 DC BS ISO 23977-1. Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1. Method by analysis of evolved carbon dioxide
BS EN 28233:1992 Thermoplastics valves. Torque. Test method
BS EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Density gradient column method
23/30437116 DC BS ISO 6775. Plastics. Plastics identification using Raman spectrometric methods
BS 2782-0:2004 Methods of testing - Plastics - Introduction
BS EN ISO 14852:2018 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide
BS EN ISO 14852:1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
BS 2782-3 Method 332A:1976 Methods of testing plastics - Mechanical properties - Stiffness of plastics film
BS DD CEN/TS 15945:2011 Packaging. Ease of opening. Criteria and test methods for evaluating consumer packaging
BS EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Gas pyknometer method
BS 2782-10 Method 1002:1977 Methods of testing plastics. Glass reinforced plastics. Determination of loss on ignition
BS EN ISO 18830:2017 Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface. Method by measuring the oxygen demand in closed respirometer
20/30399391 DC BS ISO 23977-2. Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 2. Method by measuring the oxygen demand in closed respirometer
BS EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
BS EN 15550:2017 Animal feeding stuffs: Methods of sampling and analysis. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS ISO 18280:2009 Plastics. Epoxy resins. Test methods
BS ISO 18280:2010 Plastics. Epoxy resins. Test methods
BS 2782-11 Method 1101A:1981 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Measurement of dimensions of pipes
BS 2782-10 Method 1003:1977 Methods of testing plastics. Glass reinforced plastics. Determination of tensile properties
BS EN ISO 1183-1:2019 Plastics. Methods for determining the density of non-cellular plastics. Immersion method, liquid pycnometer method and titration method
BS EN 28659:1992 Thermoplastics valves - Fatigue strength - Test method
BS EN ISO 8659:2020 Tracked Changes. Thermoplastics valves. Fatigue strength. Test method
BS 2782-8 Method 826A:1992 Methods of testing plastics - Other properties - Determination of adhesion of print on plastics sheet
BS EN ISO 14855-1:2012 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide. General method
BS ISO 23517:2021 Plastics. Soil biodegradable materials for mulch films for use in agriculture and horticulture. Requirements and test methods regarding biodegradation, ecotoxicity and control of constituents. Requirements and test methods regarding biodegradation, ecotox
BS 2782-3 Method 365A:1976 Methods of testing plastics - Mechanical properties - Determination of softness number of flexible plastics materials
BS 2782-11 Method 1112A:1989 Methods of testing plastics. Thermoplastics pipes, fittings and valves. Leaktightness of thermoplastics pipes and fittings for non-pressure applications

Japanese Industrial Standards Committee (JISC), Plastic digestion method

JIS K 6961:2014 Plastics.Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems .Method by measurement of biogas production
JIS K 6949:2015 Plastics -- Methods for the preparation of samples for biodegradation testing of plastic materials
JIS K 6950:1994 Plastics -- Testing method for aerobic biodegradability by activated sludge
JIS K 6960:2008 Plastics -- Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions -- Method by analysis of released biogas
JIS K 7228:1987 Method for measuring smoke density and concentration of gases evolved by incineration or decomposition of plastics
JIS K 6814:2008 Thermoplastics pipes -- Thermal reversion test method
JIS K 7195:1993 Testing method for heat sag of plastics
JIS K 7208:1995 Testing method for compressive properties of plastics
JIS K 7206:1991 Testing method for Vicat softening temperature of thermoplastics
JIS K 7147:2008 Plastics -- Epoxy resins -- Test methods
JIS K 7112:1980 Methods for determining the density and specific gravity of plastics
JIS K 7115:1986 Testing method for tensile creep of plastics
JIS K 7116:1987 Testing method for flexural creep of plastics
JIS K 7122:1987 Testing methods for heat of transitions of plastics
JIS K 7123:1987 Testing methods for specific heat capacity of plastics
JIS K 6911:1995 Testing methods for thermosetting plastics
JIS K 7202:1995 Method of rockwell hardness test for plastics
JIS K 7113:1995 Testing method for tensile properties of plastics
JIS A 1411:1968 Standard method of test for change in properties of plastics building materials resulting from out-door exposure
JIS K 7112:1999 Plastics -- Methods of determining the density and relative density of non-cellular plastics
JIS K 7383:2002 Plastics -- Preparation of PVC pastes for test purposes -- Dissolver method

Group Standards of the People's Republic of China, Plastic digestion method

T/SDAQI 050-2021 Ecologically degradable plastics Thermal oxygen degradation test method
T/SDAQI 049-2021 Ecologically degradable plastics Photooxidation test method
T/SDAQI 051-2021 Ecologically degradable plastics Biodegradation test method
T/CSRA 20-2022 Quantitative analysis method for degradable plastics in plastic composition test
T/GDPIA 53-2022 Analytical methods for components of starch-based biodegradable plastics
T/CSIQ 76002-2018 Plastic and plastic composite packages and packaging containers－Test method for water vapor transmission rate－Electrolytic detection sensor method
T/JTAIT 9-2021 Fingerprint method for rapid detection of biodegradable plastics and products
T/CSTM 00510-2021 Defoamer for paint and coating —Test method for defoaming and antifoaming performance
T/HBFPIA 015-2023 Determination of PBAT and PLA content in biodegradable plastics by mid-infrared spectroscopy

European Committee for Standardization (CEN), Plastic digestion method

EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
EN 14995:2006 Plastics - Evaluation of compostability - Test scheme and specifications
EN 1122:2001 Plastics - Determination of cadmium - Wet decomposition method
DD ENV 1122-1995 Determination of Cadmium in Plastics with the Method of the Wet Decomposition Superseded by ENV 1122:1995
EN ISO 15985:2017 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
EN ISO 23977-1:2021 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1: Method by analysis of evolved carbon dioxide (ISO 23977-1:2020)
FprCEN/TS 17768-2021 Organic and organo-mineral fertilizers - Digestion by aqua regia for subsequent determination of elements
EN ISO 11667:1999 Fibre Reinforced Plastics - Mouldings Compounds and Prepregs - Determination of Resin, Reinforcement-Fibre and Mineral-Filler Content - Dissolution Methods
EN ISO 23977-2:2021 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 2: Method by measuring the oxygen demand in closed respirometer (ISO 23977-2:2020)
EN 1186-4:2002 Materials and articles in contact with foodstuffs - Plastics - Part 4: Test methods for overall migration into olive oil by cell
EN 16942:2016 Fuels - Identification of vehicle compatibility - Graphical expression for consumer information
prEN ISO 23977-1:2021 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1: Method by analysis of evolved carbon dioxide (ISO 23977-1:2020)
EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
prEN ISO 23977-2:2021 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 2: Method by measuring the oxygen demand in closed respirometer (ISO 23977-2:2020)

Association Francaise de Normalisation, Plastic digestion method

NF T51-809*NF EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
NF EN ISO 10210:2017 Plastiques - Méthodes de préparation des échantillons pour les essais de biodégradation des matériaux plastiques
NF EN 1122:2001 Plastiques - Détermination du cadmium - Méthode de décomposition par voie humide
NF EN 61234-1:1994 Méthode d'essai pour la stabilité hydrolytique des matériaux isolants électriques - Partie 1 : films en matière plastique
NF T51-124*NF EN 14995:2007 Plastics - Evaluation of compostability - Test scheme and Specifications.
NF T51-150*NF EN 1122:2001 Plastics - Determination of cadmium - Wet decomposition method
NF T51-811*NF EN ISO 14853:2017 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
NF EN 17033:2018 Plastiques - Films de paillage biodégradables thermoplastiques pour utilisation en agriculture et horticulture - Exigences et méthodes d'essai
NF EN ISO 11667:1999 Plastiques renforcés de fibre - Préimprégnés et compositions de moulage - Détermination des taux de résine, de fibre de renfort et de charge minérale. Méthodes par dissolution.
NF T51-812*NF EN ISO 15985:2017 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
NF EN ISO 11468:1999 Plastiques - Préparation des pâtes PVC pour essai - Méthode utilisant un dispositif pour dissolution
NF EN ISO 14853:2017 Plastiques - Évaluation de la biodégradabilité anaérobie ultime des matériaux plastiques en milieu aqueux - Méthode par détermination de la production de biogaz
NF EN ISO 15985:2017 Plastiques - Évaluation de la biodégradation anaérobie ultime dans des conditions de digestion anaérobie à teneur élevée en solides - Méthode par analyse du biogaz libéré
NF EN 6037:2017 Série aérospatiale - Matières plastiques renforcées de fibres - Méthode d'essai - Détermination de la résistance au matage
NF T54-423*NF EN 17033:2018 Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods
AC T51-808:2012 Plastiques - Évaluation expérimentale de l'oxobiodégradabilité de matériaux polyoléfiniques sous forme de films - Méthodologie et exigences
NF EN ISO 19679:2020 Plastiques - Détermination de la biodégradation aérobie des matières plastiques non-flottantes dans une interface eau de mer/sédiments - Méthode par analyse du dioxyde de carbone libéré
NF T51-814*NF EN ISO 19679:2020 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide
NF T51-821-1*NF EN ISO 23977-1:2021 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1 : method by analysis of evolved carbon dioxide
NF T54-195:1997 PLASTICS. FILMS FOR AGRICULTURAL SOIL DISINFECTION. SPECIFICATION FOR METHYL BROMIDE BARRIER FILMS AND TEST METHODS.
NF T54-411*NF EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
XP U42-703*XP CEN/TS 17768:2022 Organic and organo-mineral fertilizers - Digestion by aqua regia for subsequent determination of elements
NF T51-821-2*NF EN ISO 23977-2:2021 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 2 : method by measuring the oxygen demand in closed respirometer
NF EN ISO 23977-2:2021 Plastiques - Détermination de la biodégradation aérobie des matières plastiques exposées à l'eau de mer - Partie 2 : méthode par mesure de la demande en oxygène dans un respiromètre fermé
NF EN ISO 23977-1:2021 Plastiques - Détermination de la biodégradation aérobie des matières plastiques exposées à l'eau de mer - Partie 1 : méthode par analyse du dioxyde de carbone dégagé
NF R21-504:1997 Motorcycles. Methods of measuring fuel consumption.
NF EN ISO 176:2005 Matières plastiques - Détermination des pertes en plastifiants - Méthodes au charbon actif
NF EN 1704:1997 Systèmes de canalisations en plastique - Robinets thermoplastiques - Méthode d'essai pour la vérification d'un robinet après des cycles thermiques sous flexion.
NF EN ISO 18830:2017 Plastiques - Détermination de la biodégradation aérobie des matières plastiques immergées à l'interface eau de mer/sédiments sableux - Méthode par mesurage de la demande en oxygène dans un respiromètre fermé
NF T54-119:1976 Plasticsplasticized PVC sheets. Conventional test method for high frequency welding.
NF T54-195:2000 Plastics - Films for agricultural soil desinfection - Specification for methyl bromide barrier films and test methods.
NF EN 16206:2012 Aliments des animaux - Dosage de l'arsenic par spectrométrie d'absorption atomique par génération d'hydrures (SAAGH) après digestion sous pression par micro-ondes (digestion à l'acide nitrique à 65 % et au peroxyde d'hydrogène à 30 %)
NF T51-162:1980 PLASTICS. METHOD OF EXPOSURE TO DAMP HEAT.
FD T57-001*FD ISO/TR 13883:1995 Plastics. Guide to the writing of test methods.
FD ISO/TR 13883:1995 Plastiques - Guide pour la rédaction des méthodes d'essai.
NF T54-084*NF EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method
NF V18-214*NF EN 15550:2017 Animal feeding stuffs : methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
NF EN ISO 1183-2:2019 Plastiques - Méthodes de détermination de la masse volumique des plastiques non alvéolaires - Partie 2 : méthode de la colonne à gradient de masse volumique
NF T51-813*NF EN ISO 18830:2017 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer
NF EN ISO 7822:1999 Plastiques renforcés de verre textile - Détermination de la teneur en vide - Méthodes par perte au feu, par désintégration mécanique et par comptage statistique.

German Institute for Standardization, Plastic digestion method

DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN EN 1122:2002 Plastics - Determination of cadmium - Wet decomposition method; German version EN 1122:2001
DIN EN 14995:2007 Plastics - Evaluation of compostability - Test scheme and specifications; English version of DIN EN 14995:2007-03
DIN EN ISO 15985:2018-02 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas (ISO 15985:2014); German version EN ISO 15985:2017
DIN EN ISO 14853:2018-02 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production (ISO 14853:2016); German version EN ISO 14853:2017
DIN EN 61234-1:1994 Method of test for the hydrolytic stability of electrical insulating materials - Part 1: Plastic films (IEC 61234-1:1994); German version EN 61234-1:1994
DIN EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN EN ISO 11667:1999-10 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999
DIN EN ISO 11468:1999-09 Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997); German version EN ISO 11468:1999
DIN EN 17033:2018 Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods
DIN EN 17033:2018-03 Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods; German version EN 17033:2018
DIN EN 1122:2002-02 Plastics - Determination of cadmium - Wet decomposition method; German version EN 1122:2001
DIN EN 61234-2:1998 Electrical insulating materials - Method of test for the hydrolytic stability - Part 2: Moulded thermosets (IEC 61234-1:1997); German version EN 61234-2:1998
DIN EN ISO 19679:2020-11 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020); German version EN ISO 19679:2020
DIN EN ISO 11468:1999 Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997); German version EN ISO 11468:1999
DIN EN ISO 15985:2018 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas (ISO 15985:2014)
DIN EN ISO 11667:1999 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999
DIN EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DIN EN ISO 23977-2:2022-01 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 2: Method by measuring the oxygen demand in closed respirometer (ISO 23977-2:2020); German version EN ISO 23977-2:2021
DIN EN ISO 23977-1:2022-01 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1: Method by analysis of evolved carbon dioxide (ISO 23977-1:2020); German version EN ISO 23977-1:2021
DIN EN ISO 8233:2023-02 Thermoplastics valves - Torque - Test method (ISO/DIS 8233:2023); German and English version prEN ISO 8233:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN 28233 (1991-06).
DIN EN 16159:2012-04 Animal feeding stuffs - Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide); German version EN 16159:2012
DIN EN ISO 14853:2018 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production (ISO 14853:2016); German version EN ISO 14853:2017
DIN EN ISO 19679:2018 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2016)
DIN EN 16206:2012-05 Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide); German version EN 16206:2012
DIN EN 28233:1991 Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990
DIN EN ISO 8659:2020-07 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020); German version EN ISO 8659:2020
DIN EN 15550:2017 Animal feeding stuffs - Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
DIN EN ISO 19679:2019 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO/DIS 19679:2019); German and English version prEN ISO 19679:2019
DIN EN ISO 18830:2018-02 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer (ISO 18830:2016); German version EN ISO 18830:2017

ES-UNE, Plastic digestion method

UNE-EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
UNE-EN ISO 15985:2018 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas (ISO 15985:2014)
UNE-EN ISO 14853:2018 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production (ISO 14853:2016)
UNE-EN 17033:2018 Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods
UNE-EN ISO 19679:2021 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)
UNE-EN ISO 23977-1:2022 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1: Method by analysis of evolved carbon dioxide (ISO 23977-1:2020)
UNE-EN ISO 23977-2:2022 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 2: Method by measuring the oxygen demand in closed respirometer (ISO 23977-2:2020)
UNE-EN ISO 8659:2021 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
UNE-EN ISO 14852:2022 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:2021)
UNE-EN ISO 18830:2018 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer (ISO 18830:2016)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Plastic digestion method

GB/T 17603-1998 Method for outdoor exposure testing of photodegradable plastics
GB/T 20875.1-2007 Method of test for the hydrolytic stability of electrical insulating materials Part 1: Plastic films
GB/T 2547-2008 Plastic resins-Sampling
GB/T 20875.2-2010 Electrical insulating materials.Methods of test for the hydrolytic stability.Part 2:Moulded thermosets
GB/T 31402-2015 Plastics.Measurement of antibacterial activity on plastics surfaces
GB/T 14485-1993 Standard methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball (falling ball)
GB/T 2913-1982 Test for whiteness of plastics
GB/T 2547-1981 Plastic resins--Sampling
GB 2913-1982 Test method for whiteness of plastics
GB/T 12545.1-2008 Measurement methods of fuel consumption for automobiles- Part 1:Measurement methods of fuel consumption for passenger cars
GB/T 1034-1998 Plastics--Determination of water absorption
GB/T 10903-1989 Check method of mixer for plastics
GB/T 7141-2008 Plastics.Methods of heat aging
GB/T 8333-2022 Plastic—Test method for flammability of rigid cellular plastic—Virtical burning method
GB/T 5471-1985 Preparation method for compression moulding of specimens of thermosetting moulding materials
GB/T 12545.1-2001 Passenger car-Fuel consumption test method
GB/T 3681-2000 Plastics-Test method of exposure to weathering
GB/T 9341-2000 Plastics--Determination of flexural properties
GB/T 9342-1988 Plastics--Determination of hardness by the ball indentation method
GB/T 9345-1988 Plastics--Determination of ash--General methods
GB/T 5478-1985 Test method for wear of plastics by rolling
GB/T 14483-1993 Test methods for deformation of plastics under load
GB/T 14484-1993 Test method for bearing strength of plastics
GB/T 15047-1994 Test method for stiftness proporties in forsion of plastics
GB/T 11546-1989 Plastics--Determination of tensile creep
GB/T 1041-1992 Plastics--Determination of compressive properties
GB/T 1040-1992 Plastics-Determination of tensile properties
GB/T 2409-1980 Plastics--Yellow index test method
GB/T 2411-1980 Plastics--Shore hardness test
GB/T 24128-2009 Method for testing resistance of plastics to mold
GB/T 24127-2009 Testing method for determining algal resistance of plastics
GB/T 41929-2022 Plastics—Epoxy resins—Test methods
GB/T 5478-2008 Plastics-Test method for wear by rolling
GB/T 8807-1988 Test method for specular gloss of plastics
GB/T 8806-1988 Method for dimension measuring of plastic pipes
GB 8807-1988 Plastic Specular Gloss Test Method
GB/T 30711-2014 Test method for thermogravimetry (TG) of friction materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Plastic digestion method

GB/T 17603-2017 Standard practice for outdoor exposure testing of photodegradable plastics

国家市场监督管理总局、中国国家标准化管理委员会, Plastic digestion method

GB/T 38787-2020 Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials
GB/T 38737-2020 Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production
GB/T 40612-2021 Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface—Method by analysis of evolved carbon dioxide

Professional Standard - Water Conservancy, Plastic digestion method

SL 144.8-2008 Calibration method of microwave heating system

American Society for Testing and Materials (ASTM), Plastic digestion method

ASTM D5511-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5988-18 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil
ASTM D5988-12 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil
ASTM D2843-10 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D5988-96 Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting
ASTM D2843-19 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D5492-17 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
ASTM D5511-02 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D2843-22 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D5492-10 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
ASTM D5988-03 Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting
ASTM D2843-99(2004)e1 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D2843-99 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D2843-99(2004) Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D7475-20 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
ASTM D5338-11 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures
ASTM D4005-92(2005) Standard Test Method for Plastic-Coated Fabrics8212;Completeness of Fusion of PVC Dispersion Coatings
ASTM D2843-16 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D5210-92 Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
ASTM D5338-98e1 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions
ASTM D5526-12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
ASTM D5526-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
ASTM E1279-89(2001) Standard Test Method for Biodegradation By a Shake-Flask Die-Away Method
ASTM D5511-94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5511-11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5511-12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5338-98(2003) Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions
ASTM D5526-94(2002) Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
ASTM D5526-94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
ASTM D5526-94(2011)e1 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
ASTM D4005-92(2015) Standard Test Method for Plastic-Coated Fabrics&x2014;Completeness of Fusion of PVC Dispersion Coatings
ASTM D7475-11 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
ASTM C1637-21 Standard Test Method for Determination of Impurities in Plutonium Materials—Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
ASTM D5210-92(2000) Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
ASTM D5210-92(2007) Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
ASTM D4005-92(2009) Standard Test Method for Plastic-Coated Fabrics8212;Completeness of Fusion of PVC Dispersion Coatings
ASTM D1692-68 Standard Method Of Test For Flammability Of Plastic Sheeting And Cellular Plastics
ASTM D1692-76e1 Standard Method Of Test For Flammability Of Plastic Sheeting And Cellular Plastics
ASTM D2122-98e1 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM D2122-22 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM D5271-93 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System
ASTM D5271-02 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System
ASTM D6691-17 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium
ASTM D4005-92(1997) Standard Test Method for Plastic-Coated Fabrics8212;Completeness of Fusion of PVC Dispersion Coatings
ASTM D4005-92(2001) Standard Test Method for Plastic-Coated Fabrics8212;Completeness of Fusion of PVC Dispersion Coatings

Lithuanian Standards Office , Plastic digestion method

LST EN 1122-2003 Plastics - Determination of cadmium - Wet decomposition method
LST EN 61234-2-2001 Electrical insulating materials. Methods of test for the hydrolytic stability. Part 2: Moulded thermosets (IEC 61234-2:1997)
LST EN ISO 11667:2000 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997)
LST EN ISO 11468:2000 Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997)
LST EN 61234-1-2001 Method of test for the hydrolytic stability of electrical insulating materials. Part 1: Plastic films (IEC 61234-1:1994)
LST EN 12061-2002 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
LST EN 15860-2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
LST EN 16159-2012 Animal feeding stuffs - Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)
LST EN 16206-2012 Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)

Danish Standards Foundation, Plastic digestion method

DS/EN 1122:2001 Plastics - Determination of cadmium - Wet decomposition method
DS/ISO 23832:2021 Plastics – Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
DS/EN ISO 11667:1999 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods
DS/EN ISO 11468:1999 Plastics - Preparation of PVC pastes for test purposes - Dissolver method
DS/EN 61234-1:1998 Method of test for the hydrolytic stability of electrical insulating materials - Part 1: Plastic films
DS/EN 61234-2:1998 Electrical insulating materials - Method of test for the hydrolytic stability - Part 2: Moulded thermosets
DS/ENV 1122:1995 Determination of cadmium in plastics with the method of the wet decomposition
DS/ISO 23977-1:2020 Plastics – Determination of the aerobic biodegradation of plastic materials exposed to seawater – Part 1: Method by analysis of evolved carbon dioxide
DS/EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
DS/EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DS/EN 28233:2003 Thermoplastics valves - Torque - Test method
DS/EN 16159:2012 Animal feeding stuffs - Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)
DS/EN 16206:2012 Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)
DS/EN 744:1996 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method

AENOR, Plastic digestion method

UNE-EN 1122:2001 Plastics - Determination of cadmium - Wet decomposition method.
UNE-EN ISO 11667:2000 FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCED-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS (ISO 11667:1997)
UNE 53206:2012 Plastics. Large plastic bags made with plastic films. Characteristics and test methods
UNE-EN ISO 11468:2000 PLASTICS - PREPARATION OF PVC PASTES FOR TEST PURPOSES - DISSOLVER METHOD (ISO 11468:1997)
UNE-EN 15860:2011 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
UNE-EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
UNE 53257-1:1988 PLASTICS. SHOPPING PLASTICS BAGS FOR ALIMENTARY USE. REQUIREMENTS AND TEST METHODS
UNE-EN 16159:2012 Animal feeding stuffs - Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)
UNE-EN 16206:2012 Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)

American National Standards Institute （ANSI), Plastic digestion method

ANSI/ASTM D5988:1997 Test Method for Determining the Aerobic Biodegradation of Soil of Plastic Materials or Residual Plastic Materials After Composing
ANSI/ASTM D2843:1999 Test Method for Density of Smoke from the Burning or Decomposition of Plastics (08.02)
ANSI/ASTM D5338:1998 Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions
ANSI/ASTM D6692:2001 Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materials in Seawater
ANSI/ASTM D5210:1992 Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewer Sludge (08.03)
ANSI/ASTM D5271:1992 Test Method for Accessing the Aerobic Biodegradation of Plastic Materials in an Activated Sludge Wastewater-Treatment-System (08.03)
ANSI/ASTM D6340:1998 Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an (A) Aqueous or (B) Compost Environment
ANSI/ASTM D638:2001 Test Method for Tensile Properties of Plastics (08.01)

Korean Agency for Technology and Standards (KATS), Plastic digestion method

KS T ISO 15985-2012(2022) Plastics-Determination of the ultimate anaerobic biodegradability and disintegration under high ― solids anaerobic ― digestion conditions ― Method by analysis released biogas
KS M 3210-2009 Plastics-Determination of cadmium-Wet decomposition method
KS M 3210-2014 Plastics－Determination of cadmium－Wet decomposition method
KS C IEC 61234-1-2002(2017) Method of test for the hydrolytic stability of electrical insulating materials－Part 1：Plastic films
KS C IEC 61234-1-2002(2022) Method of test for the hydrolytic stability of electrical insulating materials－Part 1：Plastic films
KS C IEC 61234-1:2002 Method of test for the hydrolytic stability of electrical insulating materials－Part 1：Plastic films
KS C IEC 61234-2:2002 Method of test for the hydrolytic stability of electrical insulating materials－Part 2：Moulded thermosets
KS T ISO 15985-2012(2017) Plastics-Determination of the ultimate anaerobic biodegradability and disintegration under high ― solids anaerobic ― digestion conditions ― Method by analysis released biogas
KS C IEC 61234-2-2002(2017) Method of test for the hydrolytic stability of electrical insulating materials－Part 2：Moulded thermosets
KS C IEC 61234-2-2002(2022) Method of test for the hydrolytic stability of electrical insulating materials－Part 2：Moulded thermosets
KS M 3047-1993 Method for Measuring Smoke Density and Concentration of Gases Evolved by Incineration or Decomposition of Plastics
KS T ISO 14853:2012 Plastics ― Determination of the ultimate anaerobic biodegradability in an aqueous system ― Method by measurement of biogas
KS C 2006-1998(2018)
KS M ISO 11667-2002(2017) Fibre－reinforced plastics－Moulding compounds and prepregs－Determination of resin, reinforced－fibre and mineral－filler content－Dissolution methods
KS M 3047-2008 Methods for the analysis of evolved gases concentration by burning of plastics
KS T ISO 14853-2012(2022) Plastics ― Determination of the ultimate anaerobic biodegradability in an aqueous system ― Method by measurement of biogas
KS R 1008-2006(2011) Fuel consumption test methods of automobiles
KS M 3073-2011 Testing methods for abrasion resistance of plastics by abrasive
KS M 3049-2011 Testing methods for specific heat capacity of plastics
KS M 3051-1990(2001) TESTING METHODS FOR HEAT OF TRANSITIONS OF PLASTICS
KS M 3015-2003(2018)
KS M 3061-2008 Testing method for stiffness of plastics by means of a cantilever beam
KS M 7138-2006 Testing method for ether solubility of pulpwood
KS T ISO 15985:2012 Plastics-Determination of the ultimate anaerobic biodegradability and disintegration under high ― solids anaerobic ― digestion conditions ― Method by analysis released biogas
KS R 1123-2004 Test methods of fuel tanks made of plastic material for passenger car
KS M 3006-2003 Determination of tensile properties of plastics
KS M 3015-2003 Testing methods for thermosetting plastics
KS M 3019-2008 Testing methods for shear strength of plastics by punch tool
KS M 3062-2004 Testing method for stiffness properties of plastics as a function of temperature by means of a torsion test
KS M 3022-2012 Testing method for tensile creep of plastics
KS M 3058-2012 General rules for testing fatigue of rigid plastics
KS M 3018-2002 Testing method of deformation for plastics under load
KS M 3816-1997 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF PLASTICS
KS M 3022-2008 Testing method for tensile creep of plastics
KS M 3037-1983(1998) METHOD ROCKWELL HARDNESS TEST FOR PLASTICS
KS M 3816-1982 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF PLASTICS
KS M 3018-1982 Testing method of deformation for plastics under load
KS M 3022-1976 Testing method for tensile creep of plastics
KS M 3019-1982 Testing methods for shear strength of plastics by punch tool
KS M 3037-1983 METHOD ROCKWELL HARDNESS TEST FOR PLASTICS
KS C 2007-2004 Testing methods for thermosetting plastic insulating materials
KS C 2007-2014 Testing methods for resistance of thermosetting plastic insulating materials
KS M ISO 11667-2002(2022) Fibre－reinforced plastics－Moulding compounds and prepregs－Determination of resin, reinforced－fibre and mineral－filler content－Dissolution methods
KS M ISO 1183-2006(2011) Plastics－Methods for determining the density and relative density of non-cellular plastics
KS M 3070-2011 Testing method for melt flow rate of thermoplastics
KS M 3070-1986 Testing method for melt flow rate of thermoplastics
KS M ISO 14855-1-2013(2018) Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting condition ― Method by analysis of evolved carbon dioxide ― Part 1: General method
KS M ISO 1183-2:2014 Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method

RO-ASRO, Plastic digestion method

STAS 12472-1986 PLASTICS POLYETHYLENE Method for stability determination at thermooxidative degradation
STAS SR ISO 1183:1994 Plastics - Methods for determining the density and relative density of non-cellular plastics

IT-UNI, Plastic digestion method

UNI 4818-P29-1977
UNI 6664-1970
UNI 10667-15-2021 Plastic raw-secondary materials - Part 15: Polyethylene terephthalate from post-consumer, industrial scraps and residues from mechanical recycling to be used for chemical recycling and depolymerisation - Requirements and test methods.

未注明发布机构, Plastic digestion method

BS EN ISO 14853:2017(2018) Plastics – Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system – Method by measurement of biogas production
BS ISO 4433-2:1997(1999)*BS 2782-11 Method 1161B:1998 Methods of testing plastics : Part 11 : Thermoplastics pipes, fittings and valves, as Method 1161B, for association with related test methods for plastics materials and plastics piping components .
BS EN ISO 15985:2017(2018) Plastics – Determination of the ultimate anaerobic biodegradation under high - solids anaerobic - digestion conditions – Method by analysis of released biogas
BS EN 17033:2018 Plastics — Biodegradable mulch films for use in agriculture and horticulture — Requirements and test methods
BS EN ISO 23977-2:2021(2022) Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater Part 2 : Method by measuring the oxygen demand in closed respirometer
BS EN ISO 23977-1:2021(2022) Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater Part 1 : Method by analysis of evolved carbon dioxide
BS EN 28233:1992(2000) Thermoplastics valves — Torque — Test method
BS 2782-10-Method 1002:1977(1999) Methods of testing Plastics — Part 10 : Glass reinforced plastics — Method 1002 : Determination of loss on ignition
BS EN ISO 18830:2017(2018) Plastics - Determination of aerobic biodegradation of non - floating plastic materials in a seawater / sandy sediment interface - Method by measuring the oxygen demand in closed respirometer

CEN - European Committee for Standardization, Plastic digestion method

EN ISO 14853:2017 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
EN 17033:2018 Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods
EN ISO 18830:2017 Plastics - Determination of aerobic biodegradation of nonfloating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer

International Electrotechnical Commission (IEC), Plastic digestion method

IEC 61234-1:1994 Method of test for the hydrolytic stability of electrical insulating materials; part 1: plastic films

RU-GOST R, Plastic digestion method

GOST 12020-2018 Plastics. Testing methods of plastics resistance to chemical substances
GOST 15088-2014 Plastics. Method for determination of Vicat softening temperature of thermoplastics
GOST 4651-2014 Plastics. Compression test method
GOST 4650-1980 Plastics. Methods for the determination of water absorption
GOST 15973-1982 Plastics. Methods for determination of ash
GOST 11012-2017 Plastics. Method of test for resistance to abrasion
GOST 11012-1969 Plastics. Method of test for resistance to abrasion
GOST 11736-1978 Plastics. Method for determination of water content
GOST 4648-2014 Plastics. Method of static bending test
GOST 4650-2014 Plastics. Methods for the determination of water absorption
GOST R 57222-2016 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials

Canadian Standards Association (CSA), Plastic digestion method

CSA Z218.0-93-1993 Test Method for Determining the Anaerobic Biodegradability of Plastic Materials General Instruction No 1 R(1999)

海关总署, Plastic digestion method

SN/T 5408-2022 How to identify recycled plastics and modified plastics

GM Daewoo, Plastic digestion method

GMKOREA EDS-T-7530-2011 Test Method of Plastic Tank
GMKOREA EDS-T-7542-2011
GMKOREA EDS-T-7528-2011
GMKOREA EDS-T-7525-2011 Test Method of Plastic Cam Cover

Professional Standard - Agriculture, Plastic digestion method

NY/T 1945-2010 Determination of selenium in feed.Microwave digestion.Atomic fluorescence spectrometry
GB/T 1633-1979 Test method for softening point (Vicat) of thermoplastics

European Committee for Electrotechnical Standardization（CENELEC）, Plastic digestion method

EN 61234-1:1994 Method of Test for Hydrolytic Stability of Electrical Insulating Materials Part 1: Plastic Films
EN 61234-2:1998 Electrical Insulating Materials Methods of Test for Hydrolytic Stability Part 2: Moulded Thermosets

Inner Mongolia Provincial Standard of the People's Republic of China, Plastic digestion method

DB15/T 1216-2017 Determination of lead and cadmium in feedstuff Microwave digestion-atomic absorption spectrometry

CZ-CSN, Plastic digestion method

CSN 64 0618-1975 Plastics testing. Method of test for fatigue of plastics
CSN 64 0112-1980 Plastics. Methods for determination f absorption in water
CSN 26 9314-1986 Plastic crates. Testing method of stack stability

CU-NC, Plastic digestion method

NC 30-43-1985 Plastics. Buttons Testing Methods
NC 30-36-1984 Plastics Determination of Transparent Plastic Materials Refraction Index. Testing Method
NC 30-63-1987 Plastics. Determination of Plasticizer Migration Testinq Method
NC 30-71-1988 Plastics Industry. Determination Blocking of Plastic Films Testing Method

SE-SIS, Plastic digestion method

SIS 20 03 07
SIS SS-EN 28 233-1991 Thermoplastic valves — Torque — Test method
SIS 20 03 04
SIS 20 03 12
SIS 20 03 11

Professional Standard - Nuclear Industry, Plastic digestion method

EJ/T 20162-2018 Dissolution method of plutonium material analysis sample

VN-TCVN, Plastic digestion method

TCVN 5715-1993 Rice.Method of determination for gelatinization temperature by alkali digestibility
TCVN 4504-1988 Plastics.Method for determination of density

SAE - SAE International, Plastic digestion method

SAE J1882-1994 METHOD FOR EVALUATING THE CLEAVAGE STRENGTH OF STRUCTURALLY BONDED FIBERGLASS REINFORCED PLASTIC (WEDGE TEST)
SAE J1882-1987 METHOD FOR EVALUATING THE CLEAVAGE STRENGTH OF STRUCTURALLY BONDED FIBERGLASS REINFORCED PLASTIC (WEDGE TEST)

Professional Standard - Petrochemical Industry, Plastic digestion method

SH/T 1541-2006 Test method for appearance of thermoplastic granules
SH/T 1541-1993 Appearance Test Method of Thermoplastic Granules

Professional Standard - Chemical Industry, Plastic digestion method

HG 29801-1991 Calculation method of energy consumption and saving of electrolytic caustic soda products
HG/T 3862-2006 Plastics. Test method of yellowness index
HG/T 2-163-1965 Plastic low temperature elongation test method

HU-MSZT, Plastic digestion method

NL-NEN, Plastic digestion method

NEN 3056-1967 Plastics Methods of test for foils

Taiwan Provincial Standard of the People's Republic of China, Plastic digestion method

CNS 12628-1989 Method of Test for Durometer Hardness of Plastics

American Gear Manufacturers Association, Plastic digestion method

AGMA 946-A21-2021 Test Methods for Plastic Gears

Professional Standard - Machinery, Plastic digestion method

JB/T 14535-2023 Injection moulds for plastics—Mould trials method

Professional Standard - Light Industry, Plastic digestion method

QB 800-1981 Unified method for the determination of solubility of spices

Canadian General Standards Board （CGSB), Plastic digestion method

CGSB 1-GP-71 METH 26.1-1980 Methodes D'Essai Des Peintures Et Pigments Pouvoir Solvant
CGSB 1-GP-71 METH 24.2-1980 Methodes D'Essai Des Peintures Et Pigments Teneur En Eau Methode De La Solubilite Du Toluene

The American Road & Transportation Builders Association, Plastic digestion method

AASHTO T 44-2003 Standard Method of Test for Solubility of Bituminous Materials

NZ-SNZ, Plastic digestion method

AS/NZS 3572.21:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 21: Method for the Determination of the Shear Strength of a Sandwich Panel
AS/NZS 3572.19:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 19: Method for the Determination of the Lap Shear Strength of Laminate
AS/NZS 3572.20:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 20: Method for the Determination of the Peel Strength of the Bond between Laminate Layers

CH-SNV, Plastic digestion method

SN EN ISO 19679:2020 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)

PL-PKN, Plastic digestion method

PN-EN ISO 19679-2020-12 E Plastics--Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface--Method by analysis of evolved carbon dioxide (ISO 19679:2020)
PN O79784-1987 Plastics packagee Closures Methodes of testing
PN C89087-1986 Plasties Determination of loss of plasticizers by the activated carbon method

AT-ON, Plastic digestion method

OENORM EN ISO 23977-1:2021 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1: Method by analysis of evolved carbon dioxide (ISO 23977-1:2020)
ONORM EN 28233-1991 Thermoplastics valves -Torque - Test method (ISO 8233:1988)
OENORM EN ISO 23977-2:2021 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 2: Method by measuring the oxygen demand in closed respirometer (ISO 23977-2:2020)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Plastic digestion method

PREN 6063-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Material Degradation Due to Chemical Products (Edition P1)

Indonesia Standards, Plastic digestion method

SNI 06-0427-1989 Plastic materials, Determination of bulk density

ES-AENOR, Plastic digestion method

UNE 53-235-1985

JSAE - Society of Automotive Engineers of Japan@ Inc., Plastic digestion method

JASO M312-1985 Testing Method of Plastics Parts for Automobiles

IN-BIS, Plastic digestion method

IS 2221-1962

工业和信息化部, Plastic digestion method

HG/T 3216-2018 Test method for heat deformation resistance of plastic tower packing

SG-SPRING SG, Plastic digestion method

SS 323-C1-2013 Methods of test for flexible plastic packaging materials.Part C1: Standard test method for tensile properties of thin plastic sheeting

Hunan Provincial Standard of the People's Republic of China, Plastic digestion method

DB43/T 401-2020 Energy consumption quota and calculation method per unit product of electrolytic manganese metal

Yunnan Provincial Standard of the People's Republic of China, Plastic digestion method

DB53/T 709-2015 Energy Consumption Quota and Calculation Method for Unit Product of Electrolytic Aluminum Enterprises

BE-NBN, Plastic digestion method

NBN T 40-102-1988 Plastics - Methods for determining the density and relative density of non-cellular plastics
NBN-EN 28659-1992 Thermoplastic valves - Fatigue strength - Test method

ZA-SANS, Plastic digestion method

SANS 6269:2005 Welding of thermoplastics - Test methods for welded joints

Hainan Provincial Standard of the People's Republic of China, Plastic digestion method

DB46/T 520-2020 Rapid NMR Spectroscopy Detection Method for Fully Biodegradable Plastic Products