ZH
RU
ES
tablet hardness
tablet hardness, Total:174 items.
In the international standard classification, tablet hardness involves: Pharmaceutics, Road vehicle systems, Rubber, Products of the chemical industry, Testing of metals, Construction materials, Microprocessor systems, Adhesives, Woodworking equipment, Plastics, Cellular materials, Linear and angular measurements, Analytical chemistry, Cutting tools, Paper products, Machine tool systems, Materials for aerospace construction, Photography, Ground service and maintenance equipment, Rubber and plastics products.
Professional Standard - Machinery, tablet hardness
工业和信息化部, tablet hardness
- JB/T 20104-2022 Tablet Hardness Tester
- HG/T 5254-2017 Determination of stiffening effect of textile dyeing and finishing auxiliaries and finishing agents
Society of Automotive Engineers (SAE), tablet hardness
SAE - SAE International, tablet hardness
HU-MSZT, tablet hardness
United States Navy, tablet hardness
- NAVY ZZ-R-710 A-1967 RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS
- NAVY ZZ-G-710 B-1993 GASKET MATERIAL, RUBBER 35 DUROMETER HARDNESS
- NAVY MIL-I-24330 NOTICE 1-1998 INSULATION SHEET, ELECTRICAL, LIGNO-CELLULOSIC, HIGH DENSITY, HARDBOARD
- NAVY MIL-I-24330 (1)-1968 INSULATION SHEET, ELECTRICAL, LIGNO-CELLULOSIC, HIGH DENSITY, HARDBOARD
- NAVY MIL-I-24330-1968 INSULATION SHEET, ELECTRICAL, LIGNO-CELLULOSIC, HIGH DENSITY, HARDBOARD
- NAVY MIL-PRF-1149 D-1998 GASKET MATERIALS, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS
CU-NC, tablet hardness
- NC 26-02-1966 Hardness determination for circular shaped medicinal tablets
(U.S.) Ford Automotive Standards, tablet hardness
British Standards Institution (BSI), tablet hardness
- BS EN 12829:2011 Surface active agents. Preparation of water with known calcium and magnesium hardness
- BS ISO 48-4:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
- BS 4193-18:1999 Hardmetal insert tooling - Specification for dimensions of boring bars for indexable inserts
- BS ISO 19979:2018 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
- BS ISO 18951-2:2022 Imaging materials. Scratch resistance of photographic prints - Sclerometer test method
- BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
KR-KS, tablet hardness
ES-AENOR, tablet hardness
CZ-CSN, tablet hardness
- CSN 72 2348-1983 Testing of caulking compounds for building purposes. Indentation hardness of elastomeric sealants by means of durometer by Shore a
Institute of Interconnecting and Packaging Electronic Circuits (IPC), tablet hardness
Association Francaise de Normalisation, tablet hardness
- NF T76-125:1986 Adhesives. Conventional determination of setting strength.
- NF T73-407:1997 Surface active agents. Preparation of water with known calcium hardness.
- NF T46-028:1976 Vulcanized rubbers of low hardness (10 to 35 irhd). Determination of hardness.
- NF T46-029:1976 Vulcanized rubbers of high hardness (85 to 100 irhd). Determination of hardness.
- NF T76-200*NF EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
- NF T73-407*NF EN 12829:2011 Surface active agents - Preparation of water with known calcium and magnesium hardness.
- NF E66-307:1995 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole. Dimensions.
- NF E66-305:1969 Carbide tips for turning tools.
- NF EN 12829:2011 Agents de surface - Préparation d'une eau de dureté calcique et magnésienne déterminée
- NF T46-003-4*NF ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4 : indentation hardness by durometer method (Shore hardness)
- NF P18-821:2013 Produits spéciaux destinés aux constructions en béton hydraulique - Produits de calage à base de liants hydrauliques - Caractères normalisés garantis
- NF EN ISO 2039-2:1999 Plastiques - Détermination de la dureté - Partie 2 : dureté Rockwell.
- NF E66-319:1986 Indexable inserts for cutting tools. Hardmetal inserts with wiper edges, without fixing hole. Dimensions.
American Society for Testing and Materials (ASTM), tablet hardness
- ASTM E140-12B(2019)e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
- ASTM C661-15(2022) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
- ASTM E140-97e2 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM E140-12b Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
- ASTM E140-05 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM E140-05e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM E140-97e3 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM E140-02e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM E140-02 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM F1957-99 Standard Test Method for Composite Foam Hardness-Durometer Hardness
- ASTM F1957-99(2017) Standard Test Method for Composite Foam Hardness-Durometer Hardness
- ASTM B294-92(1997) Standard Test Method for Hardness Testing of Cemented Carbides
- ASTM B294-92(2001) Standard Test Method for Hardness Testing of Cemented Carbides
- ASTM B294-92(2006) Standard Test Method for Hardness Testing of Cemented Carbides
- ASTM B294-92(2006)e1 Standard Test Method for Hardness Testing of Cemented Carbides
Defense Logistics Agency, tablet hardness
BE-NBN, tablet hardness
- NBN T 63-119-1980 Surface active agents - Preparation of water with known calcium hardness
- NBN-ISO 2174:1994 Surface active agents - Preparation of water with known calcium hardness
International Organization for Standardization (ISO), tablet hardness
- ISO 2174:1979 Surface active agents — Preparation of water with known calcium hardness
- ISO 2174:1972 Title missing - Legacy paper document
- ISO 2174:1990 Surface active agents; preparation of water with known calcium hardness
- ISO 1400:1975 Vulcanized rubbers of high hardness (85 to 100 IRHD); Determination of hardness
- ISO 13445:2003 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
- ISO 1818:1975 Vulcanized rubbers of low hardness (10 to 35 IRHD); Determination of hardness
- ISO 48:1979 Vulcanized rubbers; Determination of hardness (Hardness between 30 and 85 IRHD)
- ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
Korean Agency for Technology and Standards (KATS), tablet hardness
- KS M ISO 2174:2022 Surface active agents — Preparation of water with known calcium hardness
- KS R 1072-2008(2018) Method of hardness test for brake linings,pads and clutch facings of automobiles
- KS R 1072-1988 Method of hardness test for brake linings,pads and clutch facings of automobiles
- KS M ISO 2174-2006(2021) Surface active agents－Preparation of water with known calcium hardness
- KS M ISO 2174-2006(2016) Surface active agents－Preparation of water with known calcium hardness
- KS M ISO 2174:2006 Surface active agents－Preparation of water with known calcium hardness
- KS R 1072-2008 Method of hardness test for brake linings,pads and clutch facings of automobiles
- KS M ISO 13445:2012 Adhesives－Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
- KS B ISO 4547:2003 Metallic materials－Hardness test－Calibration of standardized blocks to be used for Knoop hardness testing machines
- KS M ISO 2039-2:2008 Plastics－Determination of hardness－Part 2：Rockwell hardness
- KS M ISO 2039-2-2008(2018) Plastics－Determination of hardness－Part 2：Rockwell hardness
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, tablet hardness
- GB/T 6367-1997 Surface active agents--Preparation of water with known calcium hardness
- GB/T 6367-2012 Surface active agents.Preparation of water with known calcium hardness
- GB/T 1698-2003 Ebonite--Determination of hardness by means of a durometer
German Institute for Standardization, tablet hardness
- DIN 96114:2023-03 Medical instruments - Scissors for preparations type Mayo without carbide inserts
- DIN EN 12829:2011-07 Surface active agents - Preparation of water with known calcium and magnesium hardness; German version EN 12829:2011
- DIN 13112-1:2017-11 Medical instruments - Part 1: Scissors for preparations without carbide inserts
- DIN EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003) English version of DIN EN ISO 13445:2006-09
- DIN 8048:1956 Side Milling Cutters with Exchangeable Blades; Carbide-tipped
- DIN EN ISO 2039-2:2000 Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987); German version EN ISO 2039-2:1999
- DIN 8043:1979 Core drills with carbide tips
- DIN 8043:2007 Core drills with carbide tips
- DIN 8090:1981 Stub reamers with hard metal tips
- DIN 8054:1979 Shell reamers with carbide tips
Danish Standards Foundation, tablet hardness
- DS/INSTA 173:1989 Building sealants. Determination of hardness
- DS/EN 12829:2011 Surface active agents - Preparation of water with known calcium and magnesium hardness
- DS/ISO 1400:1979 Vulcanized rubbers of high hardness (85 to 100 IRHD). Determination of hardness
- DS/ISO 1818:1979 Vulcanized rubber of low hardness (10 to 35 IRHD). Determination of hardness
- DS/ISO 48:1989 Vulcanized rubbers. Determination of hardness (Hardness between 30 and 85 IRHD)
- DS/EN ISO 2039-2:1999 Plastics - Determination of hardness - Part 2: Rockwell hardness
Lithuanian Standards Office , tablet hardness
- LST EN 12829-2011 Surface active agents - Preparation of water with known calcium and magnesium hardness
AENOR, tablet hardness
- UNE-EN 12829:2011 Surface active agents - Preparation of water with known calcium and magnesium hardness
ET-QSAE, tablet hardness
Japanese Industrial Standards Committee (JISC), tablet hardness
Professional Standard - Light Industry, tablet hardness
- QB/T 1325-1991 Preparation of water of known calcium hardness for detergent testing
YU-JUS, tablet hardness
- JUS G.S2.525-1984 Plastics. Determination of indentation hardness by means of a durometer (Shore hardness)
- JUS G.S2.125-1986 Rubber. Determination of Indentation hardness of a durometer (hardness Shore A and D)
- JUS B.D8.064-1983 Ceramic tiles. Determination of hardness (by Mohs)
- JUS C.A4.040-1986 Mechanical testing of metals. Hardness test. Vickers test (HV 0,2 to less than HV 5)
- JUS G.S2.527-1984 Plastics. Determination of hardness by the ball indentation method. Rockwell hardness
- JUS K.D2.051-1990 Side miliing cutters with carbide tips
FI-SFS, tablet hardness
机械电子工业部, tablet hardness
- JB 5731-1991 Woodworking Carbide Circular Saw Blade Sharpening Machine Precision
RU-GOST R, tablet hardness
The Aluminum Association, tablet hardness
- AA TP-2-1990 Standard Test Procedure for Measuring the Dissolution of Aluminum Hardeners
Indonesia Standards, tablet hardness
ZA-SANS, tablet hardness
- SANS 5870:1976 Hardness of vulcanized rubbers of hardness 30-95 IRH degrees
- SANS 5870:2008 Hardness of vulcanized rubbers of hardness 30-95 IRH degrees
Taiwan Provincial Standard of the People's Republic of China, tablet hardness
- CNS 13065-1992 Methods of Test for Viscosity of Epoxy Resins and Hardeners
Professional Standard - Aerospace, tablet hardness
- QJ 1360-1988 Method for Determination of Hardness of Composite Solid Propellants
- QJ 1360-1988修改单1-1996 Method for Determination of Hardness of Composite Solid Propellants
- QJ 398-1978 Countersink drill with carbide insert angle (D=30~60, ψ=60°, 90°)
European Committee for Standardization (CEN), tablet hardness
- EN 12829:2011 Surface active agents - Preparation of water with known calcium and magnesium hardness
- EN ISO 2039-2:1999 Plastics - Determination of Hardness - Part 2: Rockwell Hardness
IN-BIS, tablet hardness
Professional Standard - Chemical Industry, tablet hardness
- HG/T 3846-2008 Ebonite.Determination of hardness by means of a durometer
- HG/T 2413.2-1992 Determination of Apparent Hardness of Cots by Shore Hardness Tester
American National Standards Institute （ANSI), tablet hardness
Professional Standard - Agriculture, tablet hardness
RO-ASRO, tablet hardness
Professional Standard - Aviation, tablet hardness
- HB 3333-1980 Floating boring cutter with embedded carbide blade D＝65~80mm
- HB 3332-1980 Floating boring cutter with embedded carbide blade D＝30~60mm
- HB 3405-1982 Guide block with embedded carbide blade
TR-TSE, tablet hardness
- TS 2875-1977 Vulcanized Rubbers of Low Hardness (10 To 35IRHD) Determination of Hardness
- TS 2876-1977 Vulcanized Rubbers Of High Hardness (85 To 100 IRHD) Determination Of Hardness
Hebei Provincial Standard of the People's Republic of China, tablet hardness
- DB13/T 5591-2022 Rockwell hardness test method for forged (rolled) steel ball hardness
SE-SIS, tablet hardness
- SIS SS 2670-1988 Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole - Rhombic inserts with 55" included angle - Dimensions of inserts with 7" normal clearance
- SIS SS 2669-1988 Indexable hardmetal (carbide) Inserts with rounded corners, with partly cylindrical fixing hole - Rhombic inserts with 80° included angle - Dimensions of inserts with 7" normal clearance
AR-IRAM, tablet hardness
Professional Standard - Pharmaceutical Packaging, tablet hardness
- YBB 0023-2005 PVC/LDPE Composite sheet for Solid Pharmaceutical Packaging