ZH
RU
ES

Experiments on dissolution

Experiments on dissolution, Total:92 items.

In the international standard classification, Experiments on dissolution involves: Products of the textile industry, Pulps, Water quality, Services, Glass, Farming and forestry, Inorganic chemicals, Insulating fluids, Plastics, Insulating materials, Transformers. Reactors, Kitchen equipment, Surface treatment and coating, Analytical chemistry, Environmental protection, Physics. Chemistry, Laboratory medicine, Materials and articles in contact with foodstuffs, Testing of metals, Metrology and measurement in general, Construction materials, Quality.

HU-MSZT, Experiments on dissolution

MSZ KGST 1190-1978

ES-AENOR, Experiments on dissolution

International Organization for Standardization (ISO), Experiments on dissolution

ISO 105-Z07:1995 Textiles - Tests for colour fastness - Part Z07: Determination of application solubility and solution stability of water-soluble dyes
ISO 23832:2021 Plastics - Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
ISO/TR 19867-3:2018 Clean cookstoves and clean cooking solutions - Harmonized laboratory test protocols - Part 3: Voluntary performance targets for cookstoves based on laboratory testing
ISO 23517:2021 Plastics - Soil biodegradable materials for mulch films for use in agriculture and horticulture - Requirements and test methods regarding biodegradation, ecotoxicity and control of constituents
ISO 22403:2020 Plastics — Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions — Test methods and requirements

Korean Agency for Technology and Standards (KATS), Experiments on dissolution

KS K ISO 105-Z07:2009 Textiles－Tests for colour fastness－Part Z07：Determination of application solubility and solution stability of water-soluble dyes

German Institute for Standardization, Experiments on dissolution

DIN EN ISO 105-Z07:1997 Textiles - Tests for colour fastness - Part Z07: Determination of application solubility and solution stability of water-soluble dyes (ISO 105-Z07:1995); German version EN ISO 105-Z07:1997
DIN 66054:1982 Comparative testing; Principles regarding procedure
DIN 51921:1998 Testing of carbon materials - Determination of content of matter insoluble in quinoline - Binding and impregnating materials
DIN EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007); German version EN 61181:2007
DIN EN 17181:2019 Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO-production
DIN CEN/TR 852:2011-03*DIN SPEC 91159:2011-03 Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values; German version CEN/TR 852:2010

API - American Petroleum Institute, Experiments on dissolution

API PUBL 4395-1985 Laboratory Study on Solubilities of Petroleum Hydrocarbons in Groundwater
API PUBL 4601-1994 Transport and Fate of Dissolved Methanol@ Methyl-Tertiary-Butyl- Ether@ and Monoaromatic Hydrocarbons in a Shallow Sand Aquifer Appendix H: Laboratory Biotransformation Studies

VE-FONDONORMA, Experiments on dissolution

British Standards Institution (BSI), Experiments on dissolution

BS EN ISO 5263-3:2004 Pulps — Laboratory wet disintegration Part 3: Disintegration of mechanical pulps at > 85 °C (ISO 5263-3:2004)
BS ISO 23517:2021 Plastics. Soil biodegradable materials for mulch films for use in agriculture and horticulture. Requirements and test methods regarding biodegradation, ecotoxicity and control of constituents. Requirements and test methods regarding biodegradation, ecotox
BS EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
BS EN 61181:2007+A1:2012 Mineral oil-filled electrical equipment. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
BS ISO 23832:2021 Plastics. Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
PD ISO/TS 5594:2022 Soil and water quality. Guidance document on designing an interlaboratory trial for validation of biotests
PD ISO/TR 19867-3:2018 Clean cookstoves and clean cooking solutions. Harmonized laboratory test protocols. Voluntary performance targets for cookstoves based on laboratory testing
20/30393744 DC BS ISO 23832. Plastics. Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
BS EN 61326-3-1:2017 Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial appli...
BS EN IEC 61326-3-2:2018 Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements. Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applica...
BS 3473-1:1991 Chemical resistance of glass used in the production of laboratory glassware. Method for determination of resistance of glass to attack by a boiling aqueous solution of mixed alkali

American Society for Testing and Materials (ASTM), Experiments on dissolution

ASTM D5256-05 Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
ASTM D5256-05(2009) Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
ASTM D5256-14 Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
ASTM C1662-10 Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
ASTM D5256-00 Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
ASTM C1662-07 Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
ASTM E2437-05 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials
ASTM E2438-05 Standard Practice for Implementing Standard Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials
ASTM D8253-20 Standard Test Method for Determination of the Asphaltene Solvency Properties of Bitumen, Crude Oil, Condensate and/or Related Products for the Purpose of Calculating Stability, Compatibility for Blend
ASTM D8253-21 Standard Test Method for Determination of the Asphaltene Solvency Properties of Bitumen, Crude Oil, Condensate and/or Related Products for the Purpose of Calculating Stability, Compatibility for Blend

European Committee for Standardization (CEN), Experiments on dissolution

EN ISO 105-Z07:1997 Textiles - Tests for Colour Fastness - Part Z07: Determination of Application Solubility and Solution Stability of Water-Soluble Dyes ISO 105-Z07: 1995
PD CEN/TR 852:2010 Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values
EN ISO 22403:2021 Plastics - Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions - Test methods and requirements (ISO 22403:2020)

Association Francaise de Normalisation, Experiments on dissolution

NF Q50-002-3*NF EN ISO 5263-3:2005 Pulps - Laboratory wet disintegration - Part 3 : disintegration of mechanical pulps at superior or equal 85 oC
NF EN ISO 5263-3:2023 Pâtes - Désintégration humide en laboratoire - Partie 3 : désintégration des pâtes mécaniques à une température supérieure ou égale à 85 oC
NF A84-440:1991 Equipment for gas welding and allied processes. Pressure reduction station for compressed dissolved and liquefied gas. Equipment. Setting up. Tests
NF C27-240/A1*NF EN 61181/A1:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
NF C27-240:1993 Impregnated insulating materials. Application of dissolved gas analysis (dga) to factory tests on electrical equipment.
NF C27-240*NF EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
NF T60-638*NF EN 17181:2019 Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production
NF EN 61326-3-1:2017 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 3-1 : exigences d'immunité pour les systèmes relatifs à la sécurité et pour les matériels destinés à réaliser des fonctions relatives à l...
NF T16-301*NF EN ISO 29701:2011 Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test.
FD CEN/TR 852:2011 Systèmes de canalisations plastiques pour le transport d'eau destinée à la consommation humaine - Évaluation de la migration - Guide d'interprétation des valeurs de migration déterminées en laboratoire
NF EN IEC 61326-3-2:2018 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM Partie 3-2 : exigences d'immunité pour les systèmes relatifs à la sécurité et pour les matériels destinés à réaliser des fonctions relatives à la ...

PT-IPQ, Experiments on dissolution

NP 1706-1980

Japanese Industrial Standards Committee (JISC), Experiments on dissolution

JIS P 8220-3:2020 Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at greater than 85 degree C

UY-UNIT, Experiments on dissolution

UNIT 629-1981

International Electrotechnical Commission (IEC), Experiments on dissolution

IEC 61181:1993 Impregnated insulating materials; application of dissolved gas analysis (DGA) to factory tests on electrical equipment
IEC 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Experiments on dissolution

ASHRAE 4526-2002 Laboratory and Field Testing of an Aerosol-Based Duct-Sealing Technology for Large Commercial Buildings

Conference of European Post Telecommunication (CEPT), Experiments on dissolution

CEPT YEARBOOK-1994 Information on Approval Authorities Certification Bodies and Testing Laboratories for Telecommunications Terminal Equipment
CEPT YEAR BOOK E-1992 Information on Certification, Approval and Testing Laboratories for Telecommunications Terminal Equipment

ESDU - Engineering Sciences Data Unit, Experiments on dissolution

SPA-M12-1-2010 Sept.09: Characterisation of petroleum fouling with respect to operational parameters: an experimental study

Danish Standards Foundation, Experiments on dissolution

DS/ISO 23832:2021 Plastics – Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
DS/EN 71-4:1990 Safety of toys. Part 4: Experimental sets for chemistry and related activities

European Committee for Electrotechnical Standardization（CENELEC）, Experiments on dissolution

EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (Incorporates Amendment A1: 2012)

CENELEC - European Committee for Electrotechnical Standardization, Experiments on dissolution

EN 61181:1993 Impregnated Insulating Materials - Application of Dissolved Gas Analysis (DGA) to Factory Tests on Electrical Equipment

ITE - Institute of Transportation Engineers, Experiments on dissolution

CD-040-2006 ITE 2006 Technical Conference and Exhibit Compendium of Technical Papers on CD-ROM-Transportation Solutions for the Real World

American Gear Manufacturers Association, Experiments on dissolution

AGMA 07FTM02-2007 Study of the Correlation Between Theoretical and Actual Gear Fatigue Test Data on a Polyamide

BE-NBN, Experiments on dissolution

NBN-EN 71-4-1991 Safety of toys - Part 4 : Experimental sets for chemistry and related activities
NBN-EN 28317-1993 Child-resistant packaging. Requirements and testing procedures for reclosable packages (ISO 8317: 1989)

Standard Association of Australia （SAA）, Experiments on dissolution

AS 2331.2.1:2001 Methods of test for metallic and related coatings - Tests for average coating mass per unit area or for thickness Dissolution methods - Strip and weigh and analytical

RU-GOST R, Experiments on dissolution

GOST 32370-2013 Testing of chemicals of environmental hazard. Simulation Tests to Assess the Biodegradability of Chemicals Discharged in Wastewater
GOST R ISO 29701-2015 Nanotechnologies. Nanomaterials for testing in assay systems in vitro. Method for determination of endotoxin using Limulus amebocyte lysate (LAL-test)
GOST 8.652-2016 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration of dissolving in water gasses (oxygen, hydrogen)

CEN - European Committee for Standardization, Experiments on dissolution

EN 17181:2019 Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production
PREN 17181-2017 Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production

Institute of Electrical and Electronics Engineers (IEEE), Experiments on dissolution

IEEE Std C57.130-2015 Guide for the Use of Dissolved Gas Analysis Applied to Factory Temperature Rise Tests for the Evaluation of Mineral Oil-Immersed Transformers and Reactors

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Experiments on dissolution

IEEE C57.130-2015 Guide for the Use of Dissolved Gas Analysis Applied to Factory Temperature Rise Tests for the Evaluation of Mineral Oil-Immersed Transformers and Reactors

WRC - Welding Research Council, Experiments on dissolution

BULLETIN 274-1982 INTERNATIONAL BENCHMARK PROJECT ON SIMPLIFIED METHODS FOR ELEVATED TEMPERATURE DESIGN AND ANALYSIS: PROBLEM II – THE SACLAY FLUCTUATING SODIUM LEVEL EXPERIMENT; COMPARISON OF ANALYTICAL AND EXPE

IT-UNI, Experiments on dissolution

UNI/TR 11331-2021 Environmental management systems - Information on the application of UNI EN ISO 14001 in Italy, based on the arised criticalities and practical experiences

IX-EU/EC, Experiments on dissolution

NO 378/2005-2005 COMMISSION REGULATION on detailed rules for the implementation of Regulation (EC) No 1831/2003 of the European Parliament and of the Council as regards the duties and tasks of the Community Reference Laboratory concerning applications for authorisations o
COM(2009) 424 FINAL-2009 Proposal for a COUNCIL DIRECTIVE amending Directive 2000/29/EC as regards the delegation of the tasks of laboratory testing

National Association of Corrosion Engineers (NACE), Experiments on dissolution

NACE TM0398-1998 Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Above 100 Degrees C (212 Degrees F)

IETF - Internet Engineering Task Force, Experiments on dissolution

RFC 7218-2014 Adding Acronyms to Simplify Conversations about DNS-Based Authentication of Named Entities (DANE)

Society of Automotive Engineers (SAE), Experiments on dissolution

SAE J2396-2023 Definitions and Experimental Measures Related to the Specification of Driver Visual Behavior Using Video-Based Techniques

CZ-CSN, Experiments on dissolution

CSN 27 7538-1989 Earth-moving machinery. Laborato- ry evaluations of roll-over and fal- ling-object protective structures. Specifications for the deflection-limi- ting volume

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Experiments on dissolution

GB/T 35657-2017 Guideline for verification and validation of chemical analysis method and internal quality control－Metal component analysis based on sample digestion

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Experiments on dissolution

GB/T 42764-2023 Test methods and requirements for the evaluation of the intrinsic aerobic biodegradability of plastic materials exposed to marine inoculum under laboratory mesothermal conditions