ZH
RU
ES

Shrinkage based on

Shrinkage based on, Total:381 items.

In the international standard classification, Shrinkage based on involves: Construction materials, Non-textile floor coverings, Ceramics, Plastics, Wood, sawlogs and sawn timber, Products of the textile industry, Fibre optic communications, Leather technology, Dentistry, Air quality, Analytical chemistry, Cinematography, Footwear, Non-metalliferous minerals, Waxes, bituminous materials and other petroleum products, Compressors and pneumatic machines, Aerospace electric equipment and systems, Textile fibres, Testing of metals, Mobile services, Radiocommunications, Building accessories, Refractories, Telecommunication systems, Rubber, Equipment for the metallurgical industry, Equipment for the chemical industry, Quality, Adhesives, Components and accessories for telecommunications equipment, Rubber and plastics products, Glass, Materials for the reinforcement of composites, Structures of buildings, Seals, glands, Interface and interconnection equipment, Raw materials for rubber and plastics, Insulating materials, Clothes, Internal combustion engines, Electrical accessories, Materials for aerospace construction, Products of the chemical industry.

British Standards Institution (BSI), Shrinkage based on

BS EN ISO 10545-1:1997 Ceramic tiles. Sampling and basis for acceptance
BS EN ISO 10545-1:2014 Ceramic tiles. Sampling and basis for acceptance
BS EN 12808-4:2009 Grouts for tiles - Part 4:Determination of shrinkage
BS EN 12808-4:2009(2011) Grouts for tiles - Part 4:Determination of shrinkage
BS EN 12617-2:2005 Products and systems for the protection and repair of concrete structures - Test methods - Shrinkage of crack injection products based on polymer binder: volumetric shrinkage
BS EN 12617-2:2004(2005) Products and systems for the protection and repair of concrete structures - Test methods - Shrinkage of crack injection products based on polymer binder: volumetric shrinkage
BS ISO 4216:2021 Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
BS EN ISO 3521:2000 Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage
BS EN 60684-3-271:2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1
BS EN 12617-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of shrinkage and expansion
BS EN 60684-3-211:2007 Flexible insulating sleeving - Specifications for individual types of sleeving - Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
PD IEC/TR 61000-1-4:2005 Electromagnetic compatibility (EMC). General. Historical rationale for the limitation of power-frequency conducted harmonic current emmissions from equipment, in the frequency range up to 2 kHz
BS EN 60684-3-205:2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1
BS EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage
20/30412517 DC BS ISO 4216. Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
BS EN ISO 294-4:2019 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage

AT-ON, Shrinkage based on

ONORM EN 163-1992 Ceramic tiles - Sampling and basis for acceptance

RO-ASRO, Shrinkage based on

STAS SR EN 163-1995 Ceramic tiles — Sampling and bases for acceptance
STAS 2833-1980 Tests of concretes. DETERMINAT ION OF AXIAL SHRINKAGE OF HARDENED CONCRETE

IN-BIS, Shrinkage based on

IS 13711-1993 Ceramic tiles. Sampling and basis for acceptance
IS 10077-1982
IS 2818 Pt.6-1977
IS 2720 Pt.20-1992
IS 2720 Pt.20-1966
IS 6441 Pt.2-1972

Danish Standards Foundation, Shrinkage based on

DS/EN 163:1992 Ceramic tiles. Sampling and basis for acceptance
DS/EN ISO 10545-1:1998 Ceramic tiles - Part 1: Sampling and basis for acceptance
DS/EN 13844:2003 Textiles - Monofilaments - Determination of thermal shrinkage
DS/EN 1842:1998 Plastics - Thermoset moulding compounds (SMC-BMC) - Determination of compression moulding shrinkage
DS/EN 680:1994 Determination of the drying shrinkage of autoclaved aerated concrete
DS/EN 12808-4/AC:2011 Grouts for tiles - Part 4: Determination of shrinkage
DS/EN 12808-4:2009 Grouts for tiles - Part 4: Determination of shrinkage
DS/EN 13872:2004 Method of test for smoothing and/or levelling compounds - Determination of shrinkage
DS/EN ISO 3521:1999 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage
DS/EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
DS/EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage

ES-AENOR, Shrinkage based on

INTA 14 02 52

Standard Association of Australia （SAA）, Shrinkage based on

AS ISO 10545.1:2020 Ceramic tiles, Method 1: Sampling and basis for acceptance
AS 4459.1:1999 Methods of sampling and testing ceramic tiles - Sampling and basis for acceptance

Association Francaise de Normalisation, Shrinkage based on

NF P61-534-1*NF EN ISO 10545-1:2014 Ceramic tiles - Part 1 : sampling and basis for acceptance
NF P61-534:1997 Ceramic tiles. Part 1 : sampling and basis for acceptance.
NF B51-006:1985 Wood. Determination of shrinkage.
NF P61-514:1991 Ceramic tiles. Sampling and basis for acceptance.
NF X15-210:1996 Laboratory installations. Collective protection means. Classification according to containment capacity.
NF EN ISO 17304:2014 Médecine bucco-dentaire - Rétraction de polymérisation : méthode de détermination de la rétraction à la polymérisation des matériaux de restauration à base de polymère
NF EN 13844:2003 Textiles - Monofilaments - Détermination du retrait à la chaleur
NF EN 1842:1997 Plastiques - Matières à mouler thermodurcissables (SMC-BMC) - Détermination du retrait au moulage par compression.
NF EN 680:2006 Détermination du retrait de séchage du béton cellulaire autoclavé
NF EN 479:2018 Plastiques - Profilés à base de poly(chlorure de vinyle) (PVC) - Détermination du retrait à chaud
NF P19-107:1994 Determination of the drying shrinkage of autoclaved aerated concrete.
NF P19-107*NF EN 680:2006 Determination of the drying shrinkage of autoclaved aerated concrete.
NF T51-501:1976 PLASTICS. POLYESTER AND EPOXY CASTING RESINS. DETERMINATION OF TOTAL VOLUME SHRINKAGE.
NF EN 13872:2004 Méthode d'essai pour les mortiers de lissage et/ou d'égalisation - Détermination du retrait
NF EN 12390-16:2019 Essais pour béton durci - Partie 16 : détermination du retrait du béton
NF EN ISO 3521:1999 Plastiques - Résines d'époxydes et de polyesters non saturés - Détermination du retrait global en volume.
NF C93-643-211*NF EN 60684-3-211:2009 Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 211 : heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
NF C93-643-201:1993 Spécification pour gaines isolantes souples - Troisième partie : spécifications particulières aux types particuliers de gaines - Feuille 201 : gaine souple thermorétractable en PVC réticule, pour usage général, avec rapport de rétrécissement ...
NF G07-131:1982 Textiles. Testing of fabrics and garnments containing wool. Determination of shrinkage due to felting during washing.
NF C93-643-209:1993 Specification for flexible insulating sleeving. Part 3 : specification requirements for individual types of sleeving. Sheet 209 : heat shrinkable sleeving, general purpose, flame retarded polyolefin shrink ratio 2:1.
NF T51-501*NF EN ISO 3521:1999 Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage.
NF P18-977-4*NF EN 12617-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Part 4 : determination of shrinkage and expansion.
NF C93-643-248*NF EN 60684-3-248:2014 Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 248 : general purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1
NF T51-294-4*NF EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage
NF EN ISO 294-4:2019 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 4 : détermination du retrait au moulage
NF EN 1367-4:2008 Essais pour déterminer les propriétés thermiques et l'altérabilité des granulats - Partie 4 : détermination du retrait au séchage
NF T51-294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.
NF P18-977-2*NF EN 12617-2:2005 Products and systems for the protection and repair of concrete structures - Test methods - Part 2 : shrinkage of crack injection product based on polymer binder : volumetric shrinkage.
NF E51-260/A1*NF ISO 1217/A1:2016 Displacement compressors - Acceptances tests - Amendment 1 : calculation of isentropic efficiency and relationship with specific energy
NF ISO 1217/A1:2016 Compresseurs volumétriques - Essais de réception - Amendement 1 : calcul de du rendement isenthropique et relation avec l'énergie spécifique

German Institute for Standardization, Shrinkage based on

DIN EN ISO 10545-1:2015-02 Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:2014); German version EN ISO 10545-1:2014
DIN 52251-5:1987 Indirect methods of determining the frost resistance of roofing tiles; determination of drying shrinkage and firing shrinkage
DIN 53866-4:1979 Testing of textiles; shrinkage of single and plied yarns, determination of shrinkage in steam
DIN 52251-5:1987-04 Indirect methods of determining the frost resistance of roofing tiles; determination of drying shrinkage and firing shrinkage
DIN 52184:1979 Testing of wood; determination of swelling and shrinkage
DIN 50131:1974-07 Testing of Metallic Materials; Determination of Shrinkage
DIN EN 13844:2003-04 Textiles - Monofilaments - Determination of thermal shrinkage; German version EN 13844:2002
DIN 50131:1974 Testing of Metallic Materials; Determination of Shrinkage
DIN EN 1842:1997-11 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage; German version EN 1842:1997
DIN EN 680:2006-03 Determination of the drying shrinkage of autoclaved aerated concrete; German version EN 680:2005
DIN EN 12390-16:2019 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
DIN EN 12390-16:2019-12 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete; German version EN 12390-16:2019
DIN EN 13872:2004-04 Method of test for smoothing and/or levelling compounds - Determination of shrinkage; German version EN 13872:2004
DIN EN ISO 3521:1999-10 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997); German version EN ISO 3521:1999
DIN EN ISO 3380:2003 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C (ISO 3380:2002); German version EN ISO 3380:2002
DIN EN 60684-3-211:2008 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 (IEC 60684-3-211:2007); German version EN 60684-3-211:2007
DIN 52450:1985 Testing of inorganic non-metallic building materials; determination of shrinkage and expansion on small specimens
DIN EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001); German version EN ISO 294-4:2003
DIN EN 1367-4:2008-06 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage; German version EN 1367-4:2008
DIN EN 12808-4:2009 Grouts for tiles - Part 4: Determination of shrinkage; English version of DIN EN 12808-4:2009-10
DIN EN ISO 294-4:2019-04 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018); German version EN ISO 294-4:2019

TR-TSE, Shrinkage based on

TS 484-1967 TERMS RELATING TO MICROCOPIES AND THEIR BASES
TS 2374-1976 FELTING AND RELAXAT10N SHRINKAGE OF WOVEN AND KNITTED WOOL TEXTILES
TS 2351-1976 PLASTICS - THERMOSETTING MOULDING MATERIALS - DETERMINATION OF SHRINKAGE OF COMPRESSION MOULDED TEST SPECIMENS ?N THE FORM OF BARS

Korean Agency for Technology and Standards (KATS), Shrinkage based on

KS L 4004-1997 Testing method for drying and firing shrinkages of ceramic whiteware clays
KS F 2203-2004 Method of shrinkage test for wood
KS P ISO 17304:2017 Dentistry ─ Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
KS K 0423-2012 Test method for dimensional change of spun yarn
KS K 0418-2012 Test method for twist number and twist contraction of plied yarns
KS L 3303-2007 Testing method for reheat shrinkange of insulating fire bricks
KS L 3303-2017 Testing method for reheat shrinkange of insulating fire bricks
KS K 0418-1964 Test method for twist number and twist contraction of plied yarns
KS L 3307-2007 Test method for coefficient of linear expansion and shrinkage of insulating fire bricks during heating
KS L 3307-1964 Test method for coefficient of linear expansion and shrinkage of insulating fire bricks during heating
KS L 3307-1987 Test method for coefficient of linear expansion and shrinkage of insulating fire bricks during heating
KS L 4004-1997(2017) Testing method for drying and firing shrinkages of ceramic whiteware clays
KS L 4004-1982 Testing method for drying and firing shrinkages of ceramic whiteware clays
KS L 4004-1987 Testing method for drying and firing shrinkages of ceramic whiteware clays
KS K 0812-2001 TESTING METHOD FOR SHRINGKAGE IN LAUNDERING AND DIMENSIONAL RESTORABILITY OF KNIT FABRE(WASH WHEEL METHOD)
KS K 0812-1982 TESTING METHOD FOR SHRINGKAGE IN LAUNDERING AND DIMENSIONAL RESTORABILITY OF KNIT FABRE(WASH WHEEL METHOD)
KS L 4004-1997(2022) Testing method for drying and firing shrinkages of ceramic whiteware clays
KS K 0829-2001 Testing methods of thickness loss under dynamic loading for textile floor coverings
KS M ISO 3521:2010 Plastics－Unsaturated polyester and epoxy resins－Determination of overall volume shrinkage
KS M ISO 3521-2010(2020) Plastics－Unsaturated polyester and epoxy resins－Determination of overall volume shrinkage
KS M ISO 3380:2004 Leather－Physical and mechanical tests－Determination of shrinkage temperature up to 100℃
KS C IEC 60684-3-201:2004 Flexible insulating sleeving-Part 3:Specification for individual types of sleeving-Sheet 201:Heat-shrinkable sleeving, general, purpose, flexible, cross-linked PVC, shrink ratio 2:1
KS C IEC 60684-3-201:2014 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 201: Heat-shrinkable sleeving, general, purpose, flexible, cross-linked PVC, shrink ratio 2：1
KS C IEC 60684-3-201:2017 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 201: Heat-shrinkable sleeving, general, purpose, flexible, cross-linked PVC, shrink ratio 2：1
KS R ISO 14396:2006 Reciprocating internal combustion engines-Determination and method for the measurement of engine power-Additional requirements for exhaust emission tests in accordance with ISO 8178
KS C IEC 60684-3-229-2014(2019) Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, sh
KS C IEC 60684-3-211:2008 Flexible insulating sleeving-Part 3:Specifications for individual types of sleeving-Sheet 211:Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
KS M ISO 6836-2007(2017) Surface active agents－Mercerizing agents－Evaluation of the activity of wetting products for mercerization by determination of the shrinkage rate of cotton

RU-GOST R, Shrinkage based on

GOST 18616-1980 Plastics. Method of determination of shrinkage
GOST 26288-1984 Leather. Methods of test for shrinkage
GOST 23785.5-2001 Cord fabric. Method for determination of linear shrinkage
GOST 23785.5-1979 Cord fabric. Method for determination of the linear shrinkage
GOST 19609.20-1989 Concentrated kaolin. Method for determination of shrinkage
GOST 28447.5-1990 Textured yarns. Method for determination of linear shrinkage
GOST 28401-2001 Textile threads. Method for determination of linear shrinkage
GOST 28401-1989 Textile threads. Method for determination of linear shrinkage
GOST 13481-2001 Staple chemical fibre and chemical tow. Method for determination of linear shrinkage
GOST 13481-1976 Man-made fiber and tow. Method of determination of shrinkage
GOST 34206-2017 Plastics. Method for determination of shrinkage of thermosetting materials
GOST R 57593-2017 Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage
GOST R ISO 18067-2017 Textiles. Synthetic filament yarns. Determination of shrinkage in dry-hot air (after treatment)
GOST 12175-1990 Common test methods insulating and sheathing materials of electric cables. Methods for determining the density. Water absorption and shrinkage tests
GOST ISO 14396-2015 Reciprocating internal combustion engines. Determination and method for the measurement of engine power. Additional requirements for exhaust emission tests in accordance with ISO 8178

BR-ABNT, Shrinkage based on

ABNT NBR 13335-2020 Leather - Determination of shrinkage

PT-IPQ, Shrinkage based on

NP 58-1988 Essential oils Determination of refractive ?ndex
NP 58-1961
NP 121-1957

Taiwan Provincial Standard of the People's Republic of China, Shrinkage based on

CNS 8038-1983 Method of Test for Shrinkage Percentage of Woven Fabrics
CNS 14925-2005 Wood - Determination of volumetric shrinkage
CNS 459-2005 Wood - Determination of longitudinal, radial and tangential shrinkage
CNS 12474-1988 Method of Test for Shrinkage Percentage by Ironing of Woven and Knitted Fabrics

American National Standards Institute （ANSI), Shrinkage based on

ANSI/TIA-455-86-1983 Fiber Optic Cable Jacket Shrinkage
ANSI/TIA-455-86-A-2014 FOTP-86 Optical Fiber Cable Jacket Shrinkage
ANSI/TIA/EIA 732.404-2001 Cellular Digital Packet Data (CDPD) - Subnetwork Dependent Convergence Protocol
ANSI/ASTM E141:2010 Practice for Acceptance of Evidence Based on the Results of Probability Sampling
ANSI/SCTE 88-2012 Test Method for Polyethylene Jacket Longitudinal Shrinkage

KR-KS, Shrinkage based on

KS F 2203-2023 Test method for shrinkage of wood
KS P ISO 17304-2022 Dentistry Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer based restorative materials
KS P ISO 17304-2017 Dentistry ─ Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
KS C IEC 60684-3-218-2014 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 218: Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3：1
KS C IEC 60684-3-209-2017 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2：1
KS C IEC 60684-3-228-2017 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 228: Heat-shrinkable semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink
KS C IEC 60684-3-271-2017 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2：1

Lithuanian Standards Office , Shrinkage based on

LST EN ISO 10545-1:1997 Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:1995)
LST EN 13844-2003 Textiles - Monofilaments - Determination of thermal shrinkage
LST EN 12808-4-2009 Grouts for tiles - Part 4: Determination of shrinkage
LST EN 12808-4-2009/AC-2011 Grouts for tiles - Part 4: Determination of shrinkage
LST EN 1842-2002 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage
LST 1413.9-1997 Mortar. Testing methods. Determination of shrinkage. expansion deformation
LST EN 1367-4-2008 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
LST EN ISO 3521:2001 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997)

AENOR, Shrinkage based on

UNE-EN ISO 10545-1:2015 Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:2014)
UNE-EN ISO 17304:2014 Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013)
UNE-EN 13844:2003 Textiles - Monofilaments - Determination of thermal shrinkage.
UNE-EN 12808-4:2010 Grouts for tiles - Part 4: Determination of shrinkage
UNE-EN 1842:1998 PLASTICS. THERMOSET MOULDING COMPOUNDS (SMC - BMC). DETERMINATION OF COMPRESSION MOULDING SHRINKAGE
UNE-EN 13872:2004 Method of test for smoothing and/or levelling compounds - Determination of shrinkage
UNE-EN 1367-4:2009 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
UNE-EN ISO 3521:2000 PLASTICS - UNSATURATED POLYESTER AND EPOXY RESINS - DETERMINATION OF OVERALL VOLUME SHRINKAGE (ISO 3521:1997)

International Organization for Standardization (ISO), Shrinkage based on

ISO 4858:1982 Wood; Determination of volumetric shrinkage
ISO 4469:1981 Wood; Determination of radial and tangential shrinkage
ISO 2921:1975 Title missing - Legacy paper document
ISO 2921:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test)
ISO 2577:1984 Plastics; Thermosetting moulding materials; Determination of shrinkage
ISO 2577:2007 Plastics - Thermosetting moulding materials - Determination of shrinkage
ISO 738:1981 Coniferous sawn timber; Sizes; Permissible deviations and shrinkage
ISO 738:2015 Coniferous sawn timber - Sizes - Permissible deviations and shrinkage
ISO 2577:1975 Plastics — Thermosetting moulding materials — Determination of shrinkage of compression moulded test specimens in the form of bars
ISO 18066:2015 Textiles - Manmade filament yarns - Determination of shrinkage in boiling water
ISO 3521:1997 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage
ISO 3380:2002 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C
ISO 3380:2015 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C
ISO 294-4:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
ISO 4216:2021 Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method
ISO 14396:2002 Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178

Japanese Industrial Standards Committee (JISC), Shrinkage based on

JIS L 1042:1992 Testing methods for shrinkage percentage of woven fabrics
JIS Z 2103:1957 Method of test for shrinkage in volume of wood
JIS R 2617:1985 Testing method for thermal expansion and shrinkage of insulating fire bricks
JIS R 2613:1985 Testing method for reheat shrinkage of insulating fire bricks
JIS L 1057:1992 Testing methods for shrinkage percentage by ironing of woven and knitted fabrics
JIS R 2208:1976 Test method for permanent linear change of refractory brick on reheating
JIS B 8004:2005 Reciprocating internal combustion engines -- Determination and method for the measurement of engine power -- Additional requirements for exhaust emission tests in accordance with ISO 8178

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Shrinkage based on

GB/T 15059-1994 Method for determining the water expansion and shrinkage of photographic film base
GB/T 6505-2001 Test method for thermal shrinkage of synthetic filament yarns
GB/T 14235.4-1993 Testing method for linear contraction of pattern materials in investment casting
GB/T 6505-2008 Testing method for thermal shrinkage of man-made filament yarns
GB/T 15585-1995 Determination of shrinkage for injection moulding thermoplastics
GB/T 43015-2023 Test method for dry heat shrinkage of synthetic short fibers
GB/T 13465.5-2009 Test method of contraction of the impermeable graphite phenolic aldehyde agglomerant
GB/T 6505-2017 Man-made fiber.Test method for thermal shrinkage of filament yarns (after treatment)
GB/T 24148.9-2014 Plastics.Unsaturated polyester resins (UP-R).Part 9:Determination of overall volume shrinkage
GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage

Society of Automotive Engineers (SAE), Shrinkage based on

SAE AMS3636-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3637-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3638-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3582-1969 PLASTIC TUBING, ELECTRICAL INSULATION Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3623E-2011 Elastomeric Tubing, Electrical Insulation, Irradiated Polychloroprene, Flexible, Heat-Shrinkable, 1.750 to 1 Shrink Ratio
SAE AMS3636B-1967 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3636D-1973 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3637A-1966 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3583-1969 PLASTIC TUBING, ELECTRICAL INSULATION Crosslinked Polyvinyl Chloride, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3636C-1971 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3636A-1966 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3638C-1971 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639A-1966 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3638A-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3638B-1967 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639B-1967 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3636G-1995 TUBING, PLASTIC, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3632B-1967 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3632A-1966 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639F-1993 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio
SAE AMS3588A-1980 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Very Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3632E-1995 TUBING, PLASTIC, ELECTRICAL INSULATION Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639G-2012 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation, Clear, Semi-Rigid, Heat-Shrinkable, 2 to 1 Shrink Ratio
SAE AMS3632-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyvinylidene Fluoride, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3637C-1975 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3636F-1984 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3636E-1982 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3587-1969 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Very Flexible, Heat Shrinkable (Low Recovery Temperature) 2 to 1 Shrink Ratio
SAE AMS3587B-1982 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Very Flexible, Heat-Shrinkable (Low Recovery Temperature) 2 to 1 Shrink Ratio
SAE AMS3588-1969 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Very Flexible Heat Shrinkable (Low Recovery Temperature) 2 to 1 Shrink Ratio
SAE AMS3639E-1988 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639C-1975 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639D-1982 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3638D-1981 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3587A-1978 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Very Flexible Heat Shrinkable (Low Recovery Temperature) 2 to 1 Shrink Ratio
SAE AMS3588E-2011 Plastic Tubing, Electrical Insulation, Irradiated Polyolefin, Clear, Very Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE ARINC817-2006 AVIONICS DIGITAL VIDEO BUS LOW DATA RATE - UNCOMPRESSED
SAE AMS3588B-1982 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Very Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3588C-1989 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Very Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3588D-1993 Plastic Tubing, Electrical Insulation Irradiated Polyolefin, Clear, Very Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3587E-2011 Plastic Tubing, Electrical Insulation, Irradiated Polyolefin, Pigmented, Very Flexible, Heat Shrinkable Low Recovery Temperature 2 to 1 Shrink Ratio
SAE AMS7258B-2017 Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel Resistant, Low Shrinkage 65 - 75
SAE AMS4945E-2011 Titanium Alloy Tubing, Seamless, Hydraulic 3Al 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved
SAE AMS3683A-1993 Tubing, Irradiated Modified Fluoropolymer Plastic, Electrical Insulation Flame Resistant, Flexible, Heat-Shrinkable, 2 to 1 Shrink Ratio

ZA-SANS, Shrinkage based on

SANS 5653:1972 Determination of heat shrinkage of elastomeric material
SANS 5853:2008 Linear shrinkage of fines in aggregates for base-courses
SANS 3380:2010 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C

Professional Standard - Energy, Shrinkage based on

NB/SH/T 0588-2013 Standard test method for determining the volume contraction of petroleum waxes
NB/SH/T 6016-2020 Determination method of shrinkage rate of special wax wire for precision casting

TIA - Telecommunications Industry Association, Shrinkage based on

455-86-1983 FOTP-86 Fiber Optic Cable Jacket Shrinkage

Professional Standard - Petrochemical Industry, Shrinkage based on

SH/T 0588-1994 Determination of Volume Shrinkage of Petroleum Wax

(U.S.) Telecommunications Industries Association , Shrinkage based on

TIA-455-86-A-2014 FOTP-86 Optical Fiber Cable Jacket Shrinkage

Professional Standard - Chemical Industry, Shrinkage based on

HG/T 2999-1979(1997) Method for determination of shrinkage of cloth after painting
HG/T 2625-1994 Determination of Linear Shrinkage of Epoxy Casting Resin
HG/T 2380-1992 Test method for shrinkage of graphite phenolic adhesive

Group Standards of the People's Republic of China, Shrinkage based on

T/CSCA 110048-2020 "Shanghai Brand" certification criteria for semi-hermetic screw compressor

YU-JUS, Shrinkage based on

JUS B.C8.029-1979 Cements. Dry shrinkage of cement mortars
JUS G.S2.608-1980 Plastics. Thermosetting moulding materials. Determination of shrinkage of compression moulded test specimens in the form of bars

Professional Standard - Machinery, Shrinkage based on

JB/T 6542-1993 Determination of thermosetting moulding plastics shrinkage ratio

American Society for Testing and Materials (ASTM), Shrinkage based on

ASTM D2259-02(2016)e1 Standard Test Method for Shrinkage of Yarns
ASTM D4974-04 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D4974-04(2011) Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM E141-91(1997) Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
ASTM D7983-17(2022) Standard Test Method for Shrinkage of Carpet Backing Fabrics
ASTM D2102-02(2007) Standard Test Method for Shrinkage of Textile Fibers (Bundle Test)
ASTM D2102-02(2018) Standard Test Method for Shrinkage of Textile Fibers (Bundle Test)
ASTM F36-15(2021) Standard Test Method for Compressibility and Recovery of Gasket Materials
ASTM E141-91(2003)e1 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
ASTM C596-01 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
ASTM C596-96e1 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
ASTM C426-06 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
ASTM C1241-00(2009) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM D955-89(1996) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
ASTM D955-00 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
ASTM C326-03 Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
ASTM D2732-08 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
ASTM D955-08 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
ASTM C326-09 Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
ASTM C1241-00 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C1241-14 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM D955-08(2014) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
ASTM D2732-03 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
ASTM D2732-96 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
ASTM D6289-03 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
ASTM D2453-03 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM C356-03 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
ASTM D2453-15 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM C356-87(1997) Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
ASTM C356-17 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat

International Telecommunication Union (ITU), Shrinkage based on

ITU-T SERIES P SUPP 20-1993 Examples of Measurements of Handset Receive-Frequency Responses: Dependence on Earcap Leakage Losses - Telephone Transmission Quality - Objective Electro-Acoustical Measurements Supplement 20
ITU-T P SUPP 20-1993 Examples of measurements of handset receive-frequency responses: Dependence on earcap leakage losses
ITU-R BT.1618 SPANISH-2003 Data structure for DV-based audio, data and compressed video at data rates of 25 and 50 Mbit/s Estructura de datos para las se馻les de audio, de datos y de v韉eo comprimidas en formato DV a velocidades de 25 y 50 Mbit/s
ITU-R BT.1620 SPANISH-2003 Data structure for DV-based audio, data and compressed video at a data rate of 100 Mbit/s Estructura de datos para audio, datos y v韉eo comprimido basados en formato DV a una velocidad de transmisi髇 de datos de 100 Mbit/s
ITU-R BT.1620-1 SPANISH-2010 Data structure for DV-based audio, data and compressed video at a data rate of 100 Mbit/s
ITU-R BT.1620-1-2010 Data structure for DV-based audio, data and compressed video at a data rate of 100 Mbit/s
ITU-R BT.1618-1-2011 Data structure for DV-based audio, data and compressed video at data rates of 25 and 50 Mbit/s
ITU-R BT.1618-1 FRENCH-2011 Data structure for DV-based audio, data and compressed video at data rates of 25 and 50 Mbit/s
ITU-R BT.1620-1 FRENCH-2010 Data structure for DV-based audio, data and compressed video at a data rate of 100 Mbit/s
ITU-R BT.1620-2003 Data structure for DV-based audio, data and compressed video at a data rate of 100 Mbit/s Question ITU-R 12/6
ITU-R SM.1267-1997 Collection and Publication of Monitoring Data to Assist Frequency Assignment for Geostationary Satellite Systems
ITU-R SM.1267 FRENCH-1997 COLLECTION AND PUBLICATION OF MONITORING DATA TO ASSIST FREQUENCY ASSIGNMENT FOR GEOSTATIONARY SATELLITE SYSTEMS
ITU-R SM.1267 SPANISH-1997 COLLECTION AND PUBLICATION OF MONITORING DATA TO ASSIST FREQUENCY ASSIGNMENT FOR GEOSTATIONARY SATELLITE SYSTEMS

Professional Standard - Light Industry, Shrinkage based on

QB/T 1548-2015 Test method for linear shrinkage of ceramic body slurry
QB/T 1548-1992 Method for determination of linear shrinkage of ceramic billet slime

SE-SIS, Shrinkage based on

SIS SS 13 72 15-1978 Concrete testing — Hardened concrete — Shrinkage

Professional Standard - Military and Civilian Products, Shrinkage based on

WJ 750-1994 Test method for shrinkage of glue for optical instruments

SAE - SAE International, Shrinkage based on

SAE AMS3623C-1988 ELASTOMERIC TUBING@ ELECTRICAL INSULATION IRRADIATED POLYCHLOROPRENE@ FLEXIBLE@ HEAT-SHRINKABLE 1.750 TO 1 SHRINK RATIO
SAE AMS3637D-1980 Plastic Tubing@ Electrical Insulation Iradiated Polyolefin@ Clear@ Flexible@ Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3582B-2017 Plastic Tubing@ Electrical Insulation Crosslinked Polyvinyl Chloride@ Flexible Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3637E-1988 PLASTIC TUBING@ ELECTRICAL INSULATION Irradiated Polyolefin@ Clear@ Flexible@ Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3583D-1995 PLASTIC TUBING@ ELECTRICAL INSULATION CROSSLINDED POLYVINYL CHLORIDE@ SEMI-RIGID HEAT SHRINKABLE 2 TO 1 SHRINK RATIO
SAE AMS3638E-1988 PLASTIC TUBING@ ELECTRICAL INSULATION Irradiated Polyolefin@ Pigmented@ Semi-Rigid@ Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3625D-2016 Elastomeric Tubing@ Electrical Insulation Crosslinked Silicone@ Pigmented@ Flexible@ Heat-Shrinkable 1.750 to 1 Shrink Ratio (Stabilzed Type)
SAE AMS3591C-1995 POLYETHYLENE TEREPHTHALATE PLASTIC TUBING@ ELECTRICAL INSULATION - THERMALLY WELDED@ HEAT SHRINKABLE 1.6 TO 1 SHRINK RATIO
SAE AMS3683B-2017 Tubing@ Irradiated Modified Fluoropolymer Plastic@ Electrical Insulation Flame Resistant@ Flexible@ Heat-Shrinkable@ 2 to 1 Shrink Ratio

FI-SFS, Shrinkage based on

SFS-ISO 2577 E:1986 This standard is approved in English

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Shrinkage based on

GJB 5873-2006 Determination of the linear shrinkage rate of molded vulcanizate

Professional Standard - Textile, Shrinkage based on

FZ/T 50004-2011 Testing method for shrinkage in hot airof polyester staple fibers
FZ/T 50004-1991 Test method for dry heat shrinkage of polyester staple fiber
FZ 50004-1991 Test method for dry heat shrinkage of polyester staple fiber
FZ/T 50050-2020 Test method for dry heat shrinkage of synthetic fiber industrial filament
FZ/T 50023-2014 Testing method for different shrinkage of polyester partially oriented/drawn bi-shrinkage filament yarns

Professional Standard - Aviation, Shrinkage based on

HB 5350.1-1986 Method for determination of linear shrinkage of investment casting mold material
HB 5353.2-1986 Method for determination of firing shrinkage of investment casting ceramic cores
HB 5350.1-2004 Test method for properties of investment casting pattern materials-Part 1:Determination of linear shrinkage
HB 5353.2-2004 Test method for properties of investment casting ceramic core-Part 2:Determination of sintered shrinkage

Military Standard of the People's Republic of China-General Armament Department, Shrinkage based on

GJB 8614-2015 Determination of linear shrinkage of molded vulcanized rubber

CH-SNV, Shrinkage based on

NL-NEN, Shrinkage based on

NEN-EN 747-1-1993 Furniture. Bunk bed for domestic use. Part 1: Safety requirements
NEN-EN 680-1994 Determination of the drying shrinkage of autoclaved aerated concrete

国家市场监督管理总局、中国国家标准化管理委员会, Shrinkage based on

GB/T 39818-2021 Plastics—Thermosetting moulding materials—Determination of shrinkage
GB/T 38711-2020 Test method for reheating shrinkage of ultrathin glass—Laser method
GB/T 37991-2019 Measuring method for ultra-thin glass reheating line shrinkage—Dilatometer method

ES-UNE, Shrinkage based on

UNE-EN 12808-4:2010/AC:2011 Grouts for tiles - Part 4: Determination of shrinkage
UNE-EN 12390-16:2020 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
UNE-EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)

GM Daewoo, Shrinkage based on

GMKOREA EDS-T-7798-2011

Professional Standard - Agriculture, Shrinkage based on

1489药典化学药和生物制品卷-2010 Chapter 23 Obstetrics and Gynecology Drugs Section 1 Uterotonic Drugs and Ethacridine Lactate

Professional Standard - Commodity Inspection, Shrinkage based on

SN/T 0470-1995 Determination method for shrinkage in boiling water forimport and export polyester textured yarn

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Shrinkage based on

GB/T 31334.4-2016 Test methods for dipped canvas—Part 4:Hot air thermal shrinkage

GOSTR, Shrinkage based on

GOST R 57785-2017 Polymer composites. Prepregs and premixes. Determination of compression moulding shrinkage

Professional Standard - Ferrous Metallurgy, Shrinkage based on

YB/T 910-2000 Method for the detedrmination of the baked linear shrinkage (or linear expansion) ratio of self-baking carbon block

工业和信息化部, Shrinkage based on

YB/T 910-2017 Method for determination of linear shrinkage (or linear expansion) rate of roasting of self-baked carbon blocks

未注明发布机构, Shrinkage based on

BS 2782-6-method 643A:1976(1999) Methods of testing Plastics — Part 6 : Dimensional properties — Method 643A : Shrinkage on heating of film intended for shrink wrapping applications
BS EN ISO 3521:2000(2004) Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage
BS EN 1367-4:2008(2009) Tests for thermal and weathering properties of aggregates Part 4 : Determination of drying shrinkage

US-CFR-file, Shrinkage based on

CFR 26-54.4980H-4-2014 Internal revenue. Part54:Pension excise taxes. Section54.4980H–4:Assessable payments under section 4980h(a).
CFR 26-54.4980H-5-2014 Internal revenue. Part54:Pension excise taxes. Section54.4980H–5:Assessable payments under section 4980h(b).
CFR 42-423.752-2014 Public Health. Part423:Voluntary medicare prescription drug benefit. Section423.752:Basis for imposing intermediate sanctions and civil money penalties.

Malaysia Standards, Shrinkage based on

MS 1501-2000 Method of test for measuring shrinkage from mould dimensions of moulded plastics

CEN - European Committee for Standardization, Shrinkage based on

PREN 12390-16-2018 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
EN ISO 3380:2015 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100° C
EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage

Indonesia Standards, Shrinkage based on

SNI ASTM C326:2010 Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays

European Committee for Electrotechnical Standardization（CENELEC）, Shrinkage based on

EN 60684-3-211:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
EN 60684-3-248:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1

CENELEC - European Committee for Electrotechnical Standardization, Shrinkage based on

EN 60684-3-211:2002 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 211: Heat-shrinkable sleeving@ semi-rigid polyolefin@ shrink ratio 2:1
EN 60684-3-211:1994 Flexible Insulating Sleeving Part 3. Specification Requirements for Individual Types of Sleeving Sheet 211. Heat-Shrinkable Sleeving@ General Purpose@ Semi-Rigid Polyolefin@ Shrink Ratio 2:1
EN 60684-3-214:2005 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 214: Heat-shrinkable@ polyolefin sleeving@ not flame retarded@ shrink ratio 3:1 - Thick and medium wall

International Electrotechnical Commission (IEC), Shrinkage based on

IEC 60684-3-211:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
IEC 60684-3-205:2011 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1
IEC 60684-3-211:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
IEC 60684-3-201:1991 Specification for flexible insulating sleeving; part 3: specification requirements for individual types of sleeving; sheet 201: heat shrinkable sleeving, general purpose, flexible, cross-linked PVC, shrink ratio 2:1
IEC 60684-3-248:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1

BE-NBN, Shrinkage based on

NBN-EN 480-3-1991 Admixtures for concrete, mortar and grout - Test methods - Part 3 : Determination of shrinkage and expansion
NBN-EN 2591-B9-1994

European Committee for Standardization (CEN), Shrinkage based on

EN ISO 3521:1999 Plastics - Unsaturated Polyester and Epoxy Resins - Determination of Overall Volume Shrinkage ISO 3521: 1997
EN ISO 3380:2002 Leather Physical and mechanical tests Determination of shrinkage temperature up to 100 degrees C ISO 3380: 2002
EN ISO 294-4:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 4: Determination of Moulding Shrinkage ISO 294-4:1997
EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
EN 12617-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Shrinkage based on

SERIES P SUPP 20-1993 Examples of Measurements of Handset Receive-Frequency Responses: Dependence on Earcap Leakage Losses - Telephone Transmission Quality - Objective Electro-Acoustical Measurements (Supplement 20)

CZ-CSN, Shrinkage based on

CSN 44 1785-1986 Iron ores, agglomerates and pellets. Methods of determination of gas permeability and layer shrinkage during reduction

SG-SPRING SG, Shrinkage based on

SS 323 Pt.F2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part F2 : Determination Of Unrestrained Linear Thermal Shrinkage