ZH
RU
ES

voc content is the least

voc content is the least, Total:304 items.

In the international standard classification, voc content is the least involves: Paints and varnishes, Footwear, Fertilizers, IT terminal and other peripheral equipment, Office machines, Components for aerospace construction, Petroleum products in general, Fuels, Telecommunication terminal equipment, Non-ferrous metals, Graphic technology, Ceramics, Welding, brazing and soldering, Materials for aerospace construction, Tobacco, tobacco products and related equipment, Insulating materials, Insulating fluids, Spices and condiments. Food additives, Dentistry, Air quality, Plant and equipment for the food industry, Semiconducting materials, Organic chemicals, Iron and steel products, Quality, Coals, Construction materials, Textile fibres, Packaging and distribution of goods in general, Ferrous metals, Protection of and in buildings, Milk and milk products, Testing of metals, Farming and forestry, Analytical chemistry, Raw materials for rubber and plastics, Road vehicle systems, Radiation measurements, Microbiology, Products of the chemical industry, Road engineering, Soil quality. Pedology.

(U.S.) Ford Automotive Standards, voc content is the least

FORD WSB-M64J37-A-1995 PRIMER, WATERBASED, COMPLIANCE VOC, INTERIOR
FORD ESB-M64J27-A1-1993 PRIMER, WATERBORNE AUTODEPOSITION - BLACK, 100 C,"0" VOC
FORD WSB-M16J16-A-1996 PAINT, WATERBORNE, 2 COMPONENT, COMPLIANCE VOC, PLASTICS, EXTERIOR
FORD ESB-M64J27-B1-1993 PRIMER, WATERBORNE AUTODEPOSITION, BLACK, 160 C, LOW VOC Shown on ESB-M64J27-A1
FORD WSS-M33J10-A4-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET CLEARCOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A2, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD ESB-M33J3-A1-1996 ENAMEL, COMPLIANCE VOC, THERMOSET BASECOAT, BASECOAT/CLEARCOAT WET- ON-WET PROCESS - EXTERIOR
FORD WSS-M33J10-B2-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET BASECOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B4, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M33J10-A1-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET PRIMER, PROCESSED WITH WSS-M33J10-A2/WSS M33J10-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J10-B1-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET PRIMER, PROCESSED WITH WSS-M33J10-B2/WSS-M33J10-B4, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M33J7-B4-2006 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET BASECOAT, WET ON WET PROCESS WITH WSS-M33J7-B5 CLEARCOAT, ETCH & SCRATCH RESISTANT, EXTERIOR***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J10-B3-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET MIDCOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B2/WSS-M33J10-B4, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M33J10-B4-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET CLEARCOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B2, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M33J10-B5-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET TINTED CLEARCOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B2, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M33J10-A1
FORD ESB-M33J3-C2-1996 ENAMEL, COMPLIANCE VOC, THERMOSET TINTED CLEARCOAT, WET-ON-WET WITH ESB-M33J3-A1 AND ESB-M36J1-C1 (Shown on ESB-M33J3-A1)
FORD WSS-M33J12-A1-2014 ENAMEL, WATERBORNE, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET PRIMER, PROCESSED WITH WSS-M33J12-A2/WSS-M33J12-A4, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M33J3-A2-1996 ENAMEL, COMPLIANCE VOC, THERMOSET CLEARCOAT, BASECOAT/CLEARCOAT WET- ON-WET PROCESS - EXTERIOR (Shown on ESB-M33J3-A1)
FORD WSS-M4D854-A4-2012 POLYPROPYLENE (PP), 30% GLASS FIBER REINFORCED MOLDING COMPOUND, 50% MIN RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J3-F2-2002 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET TINTED CLEARCOAT, WET-ON-WET WITH TWO-COMPONENT URETHANE BASECOAT/CLEARCOAT SYSTEMS (Shown on WSS-M33J3-D1)
FORD WSS-M33J6-B1-1997 ENAMEL, COMPLIANCE VOC, MEDIUM SOLIDS, THERMOSET CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, EXTERIOR (Shown on WSS-M33J6-A1)
FORD WSS-M33J6-C1-1997 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, EXTERIOR (Shown on WSS-M33J6-A1)
FORD WSS-M33J10-A2-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET BASECOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M33J10-A3-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET MIDCOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A2/WSS-M33J10-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M33J10-A5-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET TINTED CLEARCOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A2, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M1H1138-A-2008 FABRIC, AURA PATTERN, WARP KNIT 25% MINIMUM POST INDUSTRIAL CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H1137-A-2008 FABRIC, PARK AVENUE PATTERN, WARP KNIT 25% MINIMUM POST INDUSTRIAL CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M99J330-A-2006 CATALYST, ACID (SOLUTION) - HIGH SOLIDS, LOW VOC THERMOSET BASECOAT/CLEARCOAT LOW BAKE REPAIR PROCESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M99J332-A-2006 CATALYST, ACID (SOLUTION) - HIGH SOLIDS, LOW VOC THERMOSET BASECOAT/CLEARCOAT, LOW BAKE REPAIR PROCESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M99J339-A-2006 CATALYST, ACID (SOLUTION) , HIGH SOLIDS, LOW VOC THERMOSET BASECOAT/CLEARCOAT, LOW BAKE REPAIR PROCESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D822-A4-2014 POLYAMIDE (PA) 6, HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED, MINIMUM 25% PCR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J6-B2-1997 ENAMEL, COMPLIANCE VOC, MEDIUM SOLIDS, THERMOSET TINTED CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, EXTERIOR (Shown on WSS-M33J6-A1)
FORD WSS-M33J6-C2-1997 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET TINTED CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, EXTERIOR (Shown on WSS-M33J6-A1)
FORD WSS-M33J7-A2-2002 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS WITH WSS-M33J7-A1, ETCH RESISTANT, EXTERIOR***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J7-A3-2002 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET TINTED CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, ETCH RESISTANT, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J7-B5-2006 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET CLEARCOAT, WET ON WET PROCESS WITH WSS-M33J7-B4 BASECOAT EXTERIOR***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D724-A4-2005 STYRENE/MALEIC ANHYDRIDE (SMA) COPOLYMER, RUBBER MODIFIED MOLDING COMPOUND, 20% GLASS FIBER REINFORCED BLEND WITH 10% MAXIMUM PMMA REGRIND AND 20% MAXIMUM RECLAIM AND/OR REGRIND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M99J351-A-2006 CATALYST, ACID(SOLUTION),HIGH SOLIDS, LOW VOC THERMOSET BASECOAT/CLEARCOAT ENAMEL, LOW BAKE REPAIR PROCESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H1016-A2-2008 FABRIC, SPECK S PATTERN, KNIT MIN 25% POST INDUSTRIAL CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J3-F4-2002 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET TINTED CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS WITH WSS-M33J3-D1, ETCH RESISTANT, EXTERIOR (Shown on WSS-M33J3-D1)
FORD WSS-M33J6-B3-1997 ENAMEL, COMPLIANCE VOC, MEDIUM SOLIDS, THEMOSET CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, ETCH RESISTANT, EXTERIOR (Shown on WSS-M33J6-A1)
FORD WSS-M33J7-B1-2002 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET BASECOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS WITH WSS-M33J7-B2, ETCH & SCRATCH RESISTANT, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J7-B2-2002 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS WITH WSS-M33J7-B1, ETCH & SCRATCH RESISTANT, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

NO-SN, voc content is the least

NS 4098-1980 Duplicators - Minimum information to be included in specification sheets
NS 4578-1984 Office machines - Minimum information to be included in specification sheets - Part 2: Document copying 4232- machines

International Organization for Standardization (ISO), voc content is the least

ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)
ISO/TR 7553:1987 Fertilizers; Sampling; Minimum mass of increment to be taken to be representative of the total sampling unit
ISO/IEC 11159:1996 Information technology - Office equipment - Minimum information to be included in specification sheets - Copying machines
ISO 4232-3:1984 Office machines; Minimum information to be included in specification sheets; Part 3 : Postal franking machines
ISO/IEC 15404:2000 Information technology - Office machines - Minimum information to be included in specification sheets; facsimile equipment
ISO/DIS 11890-1:2023 Paints and varnishes — Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content — Part 1: Gravimetric method for VOC determination
ISO 4232-2:1980 Office machines; Minimum information to be included in specifications sheets; Part 2 : Document copying machines
ISO/TR 5601:2023 Paints and varnishes — Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content — Best practices for the selection of test methods
ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method
ISO/CD 11890-1:1979 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method
ISO 6932:2001 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
ISO 6932:1986 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
ISO 6932:2008 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
ISO 6932:2014 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
ISO 15154:2003/Amd 1:2012 Tobacco - Determination of the content of reducing carbohydrates - Continuous-flow analysis method; Amendment 1
ISO 28801:2011 Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
ISO 8891:1998 Dental casting alloys with noble metal content of at least 25 % but less than 75 %
ISO/IEC 11160-2:2013 Information technology.Office equipment.Minimum information to be included in specification sheets.Printers.Part 2: Class 3 and Class 4 printers
ISO/IEC 11160-2:1996 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 2: Class 3 and class 4 printers
ISO/IEC 11160-2:2021 Office equipment -- Minimum information to be included in specification sheets-- Part 2:Class 3 and Class 4 printers
ISO/IEC 11160-1:1996 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 1: Class 1 and class 2 printers
ISO 1388-3:1981 Ethanol for industrial use; Methods of test; Part 3 : Estimation of content of carbonyl compounds present in small amounts; Photometric method
ISO 1336:1980 Wrought coppers (having minimum copper contents of 97,5 %); Chemical composition and forms of wrought products
ISO 1337:1980 Wrought coppers (having minimum copper contents of 99,85 %); Chemical composition and forms of wrought products
ISO 1866:1975 Pelletized carbon black for use in the rubber industry delivered in bulk or in bins — Specification for maximum fines content
ISO 11890-2:2020 Paints and varnishes — Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content — Part 2: Gas-chromatographic method
ISO 20541:2008 Milk and milk products - Determination of nitrate content - Method by enzymatic reduction and molecular-absorption spectrometry after Griess reaction
ISO 20541:2008|IDF 197:2008 Determination of nitrate content in milk and milk products Enzymatic reduction method and Griess reaction molecular absorption spectrometry
ISO 21871:2006 Microbiology of food and animal feeding stuffs - Horizontal method for the determination of low numbers of presumptive Bacillus cereus - Most probable number technique and detection method
ISO 11890-2:2020/DAmd 1 Paints and varnishes — Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content — Part 2: Gas-chromatographic method — Amendment 1

Association Francaise de Normalisation, voc content is the least

NF T30-300*NF EN ISO 17895:2006 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)
NF EN ISO 17895:2006 Peintures et vernis - Détermination de la teneur en composés organiques volatils dans les peintures émulsions à faible teneur en COV (COV en emballage)
NF T30-407-1*NF EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1 : difference method
NF EN ISO 11890-1:2007 Peintures et vernis - Détermination de la teneur en composés organiques volatils (COV) - Partie 1 : méthode par différence
NF V37-038/A1*NF ISO 15154/A1:2012 Tobacco - Determination of the content of reducing carbohydrates - Continuous-flow analysis method.
FD H60-127*FD CR 13504:2000 Packaging - Material recovery - Criteria for a minimum content of recycled material
FD CR 13504:2000 Emballages - Valorisation matières - Critères pour une teneur minimale en matériaux recyclés
NF V04-291:1989 WHEY CHEESE. DETERMINATION OF NITRATE AND NITRITE CONTENTS. METHOD BY CADMIUM REDUCTION AND SPECTROMETRY.
NF EN ISO 21871:2006 Microbiologie des aliments - Méthode horizontale pour le dénombrement de Bacillus cereus présumés en petit nombre - Technique du nombre le plus probable et méthode de recherche
NF T30-407-2*NF EN ISO 11890-2:2020 Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2 : gas-chromatographic method
NF EN ISO 11890-2:2020 Peintures et vernis - Détermination de la teneur en composés organiques volatils (COV) et/ou composés organiques semi-volatils (COSV) - Partie 2 : méthode par chromatographie en phase gazeuse
NF V04-332*NF EN ISO 20541:2008 Milk and milk products - Determination of nitrate content - Method by enzymatic reduction and molecular-absorption spectrometry after Griess reaction
NF P98-857-5*NF EN 12274-5:2018 Slurry surfacing - Test method - Part 5 : determination of the minimum binder content and wearing resistance

Korean Agency for Technology and Standards (KATS), voc content is the least

KS M ISO 17895:2011 Paints and varnishes-Determination of the volatile organic compound content of low-VOC emulsion paints(in-can VOC)
KS M ISO 17895:2021 Paints and varnishes — Determination of the volatile organic compound content of low-VOC emulsion paints(in-can VOC)
KS M ISO 17895:2016 Paints and varnishes－Determination of the volatile organic compound content of low-VOC emulsion paints(in-can VOC)
KS X ISO/IEC 15404:2007 Information technology-Office machines-Minimum information to be included in specification sheets-Facsimile equipment
KS X ISO/IEC 15404:2013 Information technology－Office machines－Minimum information to be included in specification sheets－Facsimile equipment
KS M ISO 11890-1-2017(2022) Paints and varnishes－Determination of volatile organic compound(VOC) content－Part 1：Difference method
KS P ISO 8891:2003 Dental casting alloys with noble metal content of atleast 25 % but less than 75 %
KS P ISO 8891:2008 Dental casting alloys with noble metal content of atleast 25 % but less than 75 %
KS M ISO 1388-3:2002 Ethanol for industrial use－Methods of test－Part 3：Estimation of content of carbonyl compoundspresent in small amounts－Photometric method
KS M ISO 1388-3:2017 Ethanol for industrial use — Methods of test — Part 3: Estimation of content of carbonyl compounds present in small amounts — Photometric method
KS M ISO 11890-2-2014(2021) Paints and varnishes — Determination of volatile organic compound(VOC) content — Part 2: Gas-chromatographic method
KS D ISO 6932:2004 Cold-reduced carbon steel strip with a maximum carbon content of 0.25 %
KS D ISO 6932-2004(2019) Cold-reduced carbon steel strip with a maximum carbon content of 0.25 %
KS X ISO/IEC 11160-1:2007 Information technology-Office equipment-Minimum information to be included in specification sheets-Printers-Part 1:Class 1 and Class 2 printers
KS X ISO/IEC 11160-2:2007 Information technology-Office equipment-Minimum information to be included in specification sheets-Printers-Part 2:Class 3 and Class 4 printers
KS X ISO/IEC 11160-1:2013 Information technology－Office equipment－Minimum information to be included in specification sheets－Printers－Part 1：Class 1 and Class 2 printers
KS X ISO/IEC 11160-2:2013 Information technology－Office equipment－Minimum information to be included in specification sheets－Printers－Part 2：Class 3 and Class 4 printers
KS M ISO 1388-3-2017(2022) Ethanol for industrial use — Methods of test — Part 3: Estimation of content of carbonyl compounds present in small amounts — Photometric method
KS D ISO 4829-2:2020 Steels — Determination of total silicon contents —Reduced molybdosilicate spectrophotometric method —Part 2: Silicon contents between 0.01 % and 0.05 %

British Standards Institution (BSI), voc content is the least

BS EN ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)
BS 3900-A23:2000 Paints and varnishes. Determination of volatile organic compound (VOC) content. Difference method
BS EN 16117-1:2011 Copper and copper alloys. Determination of copper content. Electrolytic determination of copper in materials with copper content less than 99,85 %
BS EN ISO 11890-1:2008 Paints and varnishes. Determination of volatile organic compound (VOC) content. Difference method
BS EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1:Difference method (ISO 11890-1:2007)
BS EN ISO 11890-2:2013 Paints and varnishes. Determination of volatile organic compound (VOC) content. Gas-chromatographic method
BS ISO 15154:2003+A1:2012 Tobacco. Determination of the content of reducing carbohydrates. Continuous-flow analysis method
BS ISO/IEC 11160-2:2021 Tracked Changes. Office equipment. Minimum information to be included in specification sheets. Class 3 and Class 4 printers
BS ISO/IEC 11160-2:2013 Information technology. Office equipment. Minimum information to be included in specification sheets. Printers. Class 3 and Class 4 printers
BS ISO 6932:2014 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
BS EN ISO 8891:2000 Dental casting alloys with noble metal content of at least 25% but less than 75%
20/30393144 DC BS ISO/IEC 11160-2. Office equipment. Minimum information to be included in specification sheets. Part 2. Class 3 and Class 4 printers
BS 3908-13:1970 Methods for the sampling and analysis of lead and lead alloys - Antimony in lead and lead alloys (low contents) (photometric method)
BS ISO 28801:2011 Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
BS 6392-2:1983 Testing of ethanol for industrial use - Method for determination of carbonyl compounds content present in small amounts (photometric method)
PD ISO/TR 5601:2023 Paints and varnishes. Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content. Guidance for the selection of test methods
BS EN ISO 11890-2:2020 Paints and varnishes – Determination of volatile organic compounds (VOC) and / or semi volatile organic compounds (SVOC) content Part 2 : Gas - chromatographic method
BS EN ISO 20541:2008 Milk and milk products - Determination of nitrate content - Method by enzymatic reduction and molecular- absorption spectrometry after Griess reaction
19/30386806 DC BS EN ISO 11890-2. Paints and varnishes. Determination of volatile organic compound (VOC) and semi volatile organic compound (SVOC) content. Part 2. Gas-chromatographic method
BS EN 12274-5:2018 Tracked Changes. Slurry surfacing. Test method. Determination of the minimum binder content and wearing resistance
BS EN ISO 21871:2006 Microbiology of food and animal feeding stuffs - Horizontal method for the determination of low numbers of presumptive Bacillus cereus - Most probable number technique and detection method

KR-KS, voc content is the least

KS M ISO 17895-2016 Paints and varnishes－Determination of the volatile organic compound content of low-VOC emulsion paints(in-can VOC)
KS M ISO 17895-2021 Paints and varnishes — Determination of the volatile organic compound content of low-VOC emulsion paints(in-can VOC)
KS M ISO 11890-1-2017 Paints and varnishes－Determination of volatile organic compound(VOC) content－Part 1：Difference method
KS P ISO 8891-2003 Dental casting alloys with noble metal content of atleast 25 % but less than 75 %
KS M ISO 11890-2-2014 Paints and varnishes — Determination of volatile organic compound(VOC) content — Part 2: Gas-chromatographic method
KS D ISO 4829-2-2020 Steels — Determination of total silicon contents —Reduced molybdosilicate spectrophotometric method —Part 2: Silicon contents between 0.01 % and 0.05 %
KS M ISO 1388-3-2017 Ethanol for industrial use — Methods of test — Part 3: Estimation of content of carbonyl compounds present in small amounts — Photometric method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, voc content is the least

GB/T 23984-2009 Paints and varnishes.Determination of the volatile organic compound content of low-VOC emulsion paints(in-can VOC)
GB/T 32367-2015 Rubber shoes.Determination of the emission of volatile organic compounds from whole shoe
GB/T 23985-2009 Paints and varnishes.Determination of volatile organic compound(VOC) content.Difference method
GB/T 23986-2009 Paints and varnishes.Determination of volatile organic compound(VOC) content.Gas-chromatographic method
GB/T 19444-2004 Oxygen precipitation characterization of silicon wafers by measurement of interstitial oxygen reduction
GB/Z 21223.3-2023 Guidelines for statistical analysis of aging test data Part 3: Minimum number of specimens under different test conditions given test data

German Institute for Standardization, voc content is the least

DIN EN ISO 17895 Berichtigung 1:2007 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005); German version EN ISO 17895:2005, Corrigenda to DIN EN ISO 17895:2005-06
DIN EN ISO 17895:2005-06 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005); German version EN ISO 17895:2005 / Note: To be replaced by DIN EN ISO 17895 (2023-03) (in preparation).
DIN EN ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005); German version EN ISO 17895:2005
DIN EN ISO 17895 Berichtigung 1:2007-11 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005); German version EN ISO 17895:2005, Corrigenda to DIN EN ISO 17895:2005-06 / Note: To be replaced by DIN EN ISO 17895 ...
DIN EN ISO 11890-1:2007-09 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007); German version EN ISO 11890-1:2007
DIN EN ISO 11890-1:2023-09 Paints and varnishes - Determination of volatile organic compounds (VOC) and/or semi-volatile organic compounds (SVOC) content - Part 1: Gravimetric method for VOC determination (ISO/DIS 11890-1:2023); German and English version prEN ISO 11890-1:2023 /...
DIN 50505:1973 Chemical analysis for copper and copper alloys; photometric determination of manganese in copper alloys containing 6 % of manganese at maximum
DIN 50506:1973 Chemical analysis of copper and copper alloys; photometric determination of nickel in copper alloys containing 2,5 % of nickel at maximum
DIN 50504:1973 Chemical analysis of copper and copper alloys; photometric determination of iron in copper and copper alloys containing 0,4 % of iron at maximum
DIN EN ISO 11890-2:2020-12 Paints and varnishes - Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020); German version EN ISO 11890-2:2020
DIN EN ISO 21871:2006-04 Microbiology of food and animal feeding stuffs - Horizontal method for the determination of low numbers of presumptive Bacillus cereus - Most probable number technique and detection method (ISO 21871:2006); German version EN ISO 21871:2006
DIN 51603-7:2017-03 Liquid fuels - Fuel oils - Part 7: Fuel oil SA-LW with low Aluminium and low Silicon Content, Minimum Requirements
DIN EN ISO 21871:2006 Microbiology of food and animal feeding stuffs - Horizontal method for the determination of low numbers of presumptive Bacillus cereus - Most probable number technique and detection method (ISO 21871:2006); English version of DIN EN ISO 21871:2006-04
DIN EN 12274-5:2018 Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and wearing resistance

Japanese Industrial Standards Committee (JISC), voc content is the least

JIS B 9527:2004 Office equipment -- Minimum information to be included in specification sheets -- Printers
JIS T 6122:2022 Dental casting alloys with noble metal content of at least 25 % but less than 75 %
JIS K 5601-5-1:2006 Testing methods for paint components -- Part 5: Determination of volatile organic compound (VOC) content in paints -- Section 1: Gas-chromatographic method
JIS K 5601-5-2:2008 Testing methods for paint components -- Part 5: Determination of volatile organic compound (VOC) content in paints -- Section 2: Water-based paints (Multiple standard addition method)

Lithuanian Standards Office , voc content is the least

LST EN ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005)
LST EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
LST EN ISO 11890-2:2006 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2006)

AENOR, voc content is the least

UNE-EN ISO 17895:2006 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005)
UNE-EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
UNE-CR 13504:2001 Packaging - Material recovery - Criteria for a minimum content of recycled material
UNE-EN ISO 11890-2:2013 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013)
UNE 7295:1976 DETERMINATION OF CONTENT, MAXIMUM SIZE AND THICK AGGREGATE GRANULOMETRIC MODULUS IN FRESH CONCRETE.
UNE 55813:1984 SURFACE ACTIVE AGENTS. ETHANOL TO BE USED AS RAW-MATERIAL IN DETERGENT FORMULATIONS. ESTIMATION OF CONTENT OF CARBONYL COMPOUNDS PRESENT IN SMALL AMOUNTS. PHOTOMETRIC METHOD

U.S. Air Force, voc content is the least

AIR FORCE A-A-58056-1996 MECHANICAL STREET SWEEPER, MINIMUM 3 CUBIC YARD CAPACITY

European Committee for Standardization (CEN), voc content is the least

EN ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)
EN ISO/IEC 11159:1996 Information Technology - Office Equipment - Minimum Information to be Included in Specification Sheets - Copying Machines ISO/IEC 11159:1992
EN ISO/IEC 11159:1998 Information Technology - Office Equipment - Minimum Information to Be Included in Specification Sheets - Copying Machines ISO/IEC 11159:1996
EN ISO 8891:1995 Dental Casting Alloys with Noble Metal Content of 25% up to But Not Including 75% (ISO 8891: 1993)
EN ISO 8891:2000 Dental Casting Alloys with Noble Metal Content of at Least 25% but Less Than 75% ISO 8891:1998
EN ISO 21871:2006 Microbiology of food and animal feeding stuffs - Horizontal method for the determination of low numbers of presumptive Bacillus cereus - Most probable number technique and detection method (ISO 21871:2006)

ZA-SANS, voc content is the least

SANS 11890-2:2004 Paints and varnishes - Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method
SANS 11890-1:2004 Paints and varnishes - Determination of volatile organic compound (VOC) content Part 1: Difference method

未注明发布机构, voc content is the least

DIN EN ISO 11890-1:2002 Coating materials – Determination of the content of volatile organic compounds (VOC content) – Part 1: Differential method
JIS B 9527:2023 Information technology -- Office equipment -- Minimum information to be included in specification sheets for printers -- Part 2: Class 3 and Class 4 printers

Taiwan Provincial Standard of the People's Republic of China, voc content is the least

CNS 13369-1-1994 Office Machines - Minimum Information to be Included in Specification Sheets Part 1: Duplicators
CNS 13369.1-1994 Office Machines - Minimum Information to be Included in Specification Sheets Part 1: Duplicators
CNS 13369-3-1994 Office Machines - Minimum Information to be Included in Specification Sheets Part 3: Postal Franking Machines
CNS 13369-2-1994 Office Machines - Minimum Information to be Included in Specification Sheets Part 2: Document Copying Machines
CNS 13369.2-1994 Office Machines - Minimum Information to be Included in Specification Sheets Part 2: Document Copying Machines
CNS 13369.3-1994 Office Machines - Minimum Information to be Included in Specification Sheets Part 3: Postal Franking Machines
CNS 3656-1983 Method of Test for Optimum SO₃ in Portland Cement

TH-TISI, voc content is the least

TIS 2271-2006 Paints and varnishes.determination of the volatile organic compound content of low.voc emulsion paints (in.can voc)
TIS 2268.1-2006 Paints and varnishes.determination of volatile organic compound (voc) content.part 1: difference method
TIS 2268.2-2006 Paints and varnishes.determination of volatile organic compound (voc) content.part 2: gas-chromatographic method

RU-GOST R, voc content is the least

GOST R 52485-2005 Paint materials. Determination of volatile organic compound (VOC) content. Difference method
GOST 31991.1-2012 Paint materials. Determination of volatile organic compound (VOC) content. Difference method
GOST 22898-1978 Low-sulphur petroleum cokes. Specifications
GOST 31991.2-2012 Paint materials. Determination of volatile organic compound (VOC) content. Gas-chromatographic method
GOST R 52486-2010 Paint materials. Determination of volatile organic compound (VOC) content. Gas-chromatographic method
GOST R 52486-2005 Paint materials. Determination of volatile organic compound (VOC) content. Gas-chromatographic method
GOST 8858-1993 Brown coals, hard coals and anthracite. Methods for determination of moisture holding capacity
GOST R 50467-1993 Ethanol for industrial use. Methods of test. Estimation of content of carbonyl compounds present in small amounts. Photometric method
GOST ISO 8891-2011 Dental casting alloys with noble metal content of at least 25% but less than 75%. Technical requirements. Test methods
GOST R ISO 20541-2011 Milk and milk products. Determination of nitrate content. Method by enzymatic reduction and molecular-absorption spectrometry after. Griess reaction
GOST ISO/TR 14735-2015 Cosmetics. Analytical methods. Technical guidance document for minimizing and determining N-nitrosamines

American Society for Testing and Materials (ASTM), voc content is the least

ASTM D5087-02(2021) Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D6053-08 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
ASTM D5087-02(2014) Standard Test Method for Determining Amount of Volatile Organic Compound 40;VOC41; Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device 40;Abatement41;
ASTM D3960-01 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D3960-04 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D3960-02 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D3960-05(2018) Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM C563-17 Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement
ASTM D2817-91(2001) Standard Specification for Maximum Cashmere Coarse-Hair Content in Cashmere
ASTM D2817-91(1995) Standard Specification for Maximum Cashmere Coarse-Hair Content in Cashmere
ASTM D2817-18 Standard Specification for Maximum Cashmere Coarse-Hair Content in Cashmere
ASTM D2817-05 Standard Specification for Maximum Cashmere Coarse-Hair Content in Cashmere
ASTM D2817-05(2009) Standard Specification for Maximum Cashmere Coarse-Hair Content in Cashmere
ASTM C563-96 Standard Test Method for Optimum SO3 in Hydraulic Cement Using 24-h Compressive Strength
ASTM C563-16 Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
ASTM D6886-03 Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy
ASTM D6266-00a(2011) Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM E1249-10 Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources
ASTM A794-06 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
ASTM A794-97 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled
ASTM C563-15 Standard Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
ASTM C563-03 Standard Test Method for Optimum SO₃ in Hydraulic Cement Using 24-h Compressive Strength
ASTM A659/A659M-10 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
ASTM A659/A659M-12 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

CN-STDBOOK, voc content is the least

图书 A-4913 What to Know About Food Labeling - Dates and Net Amounts

ANSI - American National Standards Institute, voc content is the least

INCITS/ISO/IEC 11159:1997 Information technology - Office equipment - Minimum information to be included in specification sheets - Copying machines
INCITS/ISO/IEC 15404:2000 Information technology — Office machines — Minimum information to be included in specification sheets — Facsimile equipment
INCITS/ISO 4232-2:1980 Office machines - Minimum information to be included in specifications sheets - Part 2 : Document copying machines (Adopted by INCITS)
INCITS/ISO 4232-3:1984 Office machines - Minimum information to be included in specification sheets - Part 3 : Postal franking machines (Adopted by INCITS)
INCITS/ISO/IEC 11160-1:1996 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 1: Class 1 and Class 2 printers (Adopted by INCITS)
INCITS/ISO/IEC 11160-2:1996 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 2: Class 3 and Class 4 printers (Adopted by INCITS)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, voc content is the least

GB/T 34682-2017 Determination of volatile organic compound(VOC) content in reactive diluent containing coatings
GB/T 34675-2017 Determination of volatile organic compound(VOC) content in radiation curable coatings

American National Standards Institute （ANSI), voc content is the least

ANSI/INCITS/ISO 4232-3:1984 Office Machines - Minimum Information to be Included in Specification Sheets - Part 3: Postal Franking Machines
ANSI/INCITS/ISO/IEC 15404:2008 Information technology - Office machines - Minimum information to be included in specification sheets - Facsimile equipment
ANSI/INCITS/ISO/IEC 15404:2000 Information technology - Office machines - Minimum information to be included in specification sheets - Facsimile equipment
ANSI/INCITS/ISO 4232-2:1980 Office Machines - Minimum Information to be Included in Specifications Sheets - Part 2: Document Copying Machines
ANSI/ISO 4232-3:1984 Office machines - Minimum information to be included in specification sheets - Part 3 : Postal franking machines Adopted by INCITS
ANSI/ASTM D6053:2008 Test Method for Determination of Volatile Organic Compound (VOC) Content of Electric Insulating Varnishes
ANSI/ISO/IEC 11159:1996 Information technology - Office equipment - Minimum information to be included in specification sheets - Copying machines Adopted by INCITS; Corrected and Reprinted: 03/01/1997
ANSI/ISO/IEC 11160-1:1996 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 1: Class 1 and Class 2 printers Adopted by INCITS
ANSI/ISO/IEC 11160-2:1996 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 2: Class 3 and Class 4 printers Adopted by INCITS
ANSI/ISO 4232-2:1980 Office machines - Minimum information to be included in specifications sheets - Part 2 : Document copying machines Adopted by INCITS
ANSI/INCITS/ISO/IEC 11160-1:1996 Information Technology - Office Equipment - Minimum Information to be Included in Specification Sheets - Printers - Part 1: Class 1 and Class 2 Printers

BR-ABNT, voc content is the least

ABNT P-EB-353-1971

CZ-CSN, voc content is the least

CSN 46 7211-1964 Calves breeding by milk of reduced fat content
CSN 72 1074-1984 Determination of optimum and processing moisture of ceramic masses by means of Pfefferkorn apparatus
CSN 72 1565 Cast.11-1985 Testing of brick clays. Determination of the maximal comparative speed of faultless drying. Determination of critical moisture content

HU-MSZT, voc content is the least

United States Navy, voc content is the least

NAVY QPL-TT-P-2756-2-2003 POLYURETHANE COATING: SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUNDS (VOC) CONTENT
NAVY QPL-TT-P-2756-2010 Polyurethane Coating: Self-Priming Topcoat, Low Volatile Organic Compounds (VOC) Content

SSPC - The Society for Protective Coatings, voc content is the least

GUIDE 10-1994 Guide to Specifying Coatings Conforming to Volatile Organic Compound (VOC) Content Requirements

Danish Standards Foundation, voc content is the least

DS/EN ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints
DS/EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method
DS/EN ISO 11890-2:2013 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method
DS/EN 28 891:1992 Dental casting alloys with noble metal content of 25% up to but not including 75%
DS/EN ISO 8891:1995 Dental casting alloys with noble metal content of 25% up to but not including 75%
DS/CEN/CR 13504:2001 Packaging - Material recovery - Criteria for a minimum content of recycled material
DS/ISO/IEC 11160-1:1998 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 1: Class 1 and Class 2 printers
DS/ISO/IEC 11160-2:2013 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 2: Class 3 and Class 4 printers

Group Standards of the People's Republic of China, voc content is the least

T/HBTL 007-2020 Standard for the content limit of volatile organic compounds in low-VOC roofing waterproof coatings
T/HBTL 015-2020 Standard for the content limit of volatile organic compounds in low-VOC solvent-based adhesives

YU-JUS, voc content is the least

JUS H.B8.237-1988 Ethanol for industrial use.Estimation of content of carbonyl compounds present in small amounts.Photometric method
JUS Z.B0.001-1991 Safety precautions. Maximum allowable concentrations of toxic gases vapours and aerosols in working premises atmosphere

Society of Automotive Engineers (SAE), voc content is the least

SAE AMS5030J-2008 Steel, Welding Wire 0.06 Carbon, Maximum
SAE AMS5030H-2003 Steel, Welding Wire 0.06 Carbon, Maximum UNS K00606
SAE AMS5042L-2003 Steel, Sheet and Strip 0.15 Carbon, Maximum Forming Grade UNS G 10100
SAE AMS5062H-2009 Steel, Low Carbon, Bars, Forgings, Tubing, Sheet, Strip, and Plate, 0.25 Carbon, Maximum

ACI - American Concrete Institute, voc content is the least

ACI 329.1T-2018 Minimum Cementitious Materials Content in Specifications

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., voc content is the least

ASHRAE OR-10-052-2010 Methodology to Evaluate End Use Options to Reduce CO2 Emissions from Buildings

VN-TCVN, voc content is the least

TCVN 5685-1992 Fish sauce.Maximum lead content and method of determination

Indonesia Standards, voc content is the least

SNI 7385-2009 Mycotoxin maximum level content on food

Association of German Mechanical Engineers, voc content is the least

VDI 3892-2015 Emission control - Roasted-coffee-producing industry - Plants with a minimum daily output of at least 0,5 tonnes
VDI 3892-2003 Emission control - Coffee treatment and processing industry - Plants with a minimum daily output of at least 0,5 tonnes

Professional Standard - Electron, voc content is the least

SJ/T 10627-1995 Test methods for oxygen precipitation characterization of silicon wafers by measurement of interstitial oxygen reduction

PL-PKN, voc content is the least

PN C04129-1970 Petroleum products Determination ol contents of aromatic hydrocarbons under 2% in products with end point max 300°C
PN-EN ISO 11890-2-2020-12 E Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020)

NL-NEN, voc content is the least

NEN 2583-1991 Fertilizers - Determination of cadmium content (of at least 10 mg/kg) by atomic absorption spectrometry (flame technique)

AGMA - American Gear Manufacturers Association, voc content is the least

2000FTM2-2000 Calculation of Optimum Surface Carbon Content for Carburized Case Hardened Gears

The Society for Protective Coatings (SSPC), voc content is the least

SSPC GUIDE 10-1994 Guide to Specifying Coatings Conforming to Volatile Organic Compound (VOC) Content Requirements

未注明发布机构, voc content is the least

DIN EN ISO 11890-1:2002 Coating materials – Determination of the content of volatile organic compounds (VOC content) – Part 1: Differential method
JIS B 9527:2023 Information technology -- Office equipment -- Minimum information to be included in specification sheets for printers -- Part 2: Class 3 and Class 4 printers

BE-NBN, voc content is the least

NBN-EN 28891-1992 Dental casting alloys with noble metal content of 25 % up to but not including 75 % (ISO 8891:1990)
NBN-EN 24829-1-1992 Steel and cast iron. Determination of total silicon content. Reduced molybdosilicate spectrophotometric method. Part 1: Silicon content between 0,05 and 1 % (ISO 4829-1:1986)
NBN-EN 24829-2-1992 Steel and iron. Determinaiton of total silicon content. Reduced molybdosilicate spectrophotometric method. Part 2: Silicon contents between 0,01 and 0,05 % (ISO 4829-2:1988)

ES-AENOR, voc content is the least

American Gear Manufacturers Association, voc content is the least

AGMA 2000FTM2-2000 Calculation of Optimum Surface Carbon Content for Carburized Case Hardened Gears

ES-UNE, voc content is the least

UNE 146406:2018 Determination of content, maximum size and thick aggregate granulometric modulus in fresh concrete.
UNE-EN ISO 11890-2:2021 Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020)
UNE-EN 12274-5:2020 Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and wearing resistance

RO-ASRO, voc content is the least

STAS SR ISO 1337:1996 Wrought coppers (having minimum copper contents of 99,85 %). Chemical composition and forms of wrought products

Professional Standard - Agriculture, voc content is the least

NY 1500.56.4-2009 Maximum residue limits for pesticides.mancozeb.miscellaneous kinds of leguminous vegetable(include legume)

PT-IPQ, voc content is the least

NP 2097-1986

IT-UNI, voc content is the least

UNI 5767-1966

International Telecommunication Union (ITU), voc content is the least

ITU-R INFORME 888-2 SPANISH-1990 SHORT-TERM FORECASTING OF CRITICAL FREQUENCIES, OPERATIONAL MAXIMUM USABLE FREQUENCIES AND TOTAL ELECTRON CONTENT PREDICCIONES A CORTO PLAZO DE LAS FRECUENCIAS CR蚑ICAS, DE LAS FRECUENCIAS M罼IMAS UTILIZABLES DE EXPLOTACI覰 Y DEL CONTENIDO ELECTR覰ICO TO
ITU-R REPORT 888-2-1990 SHORT-TERM FORECASTING OF CRITICAL FREQUENCIES, OPERATIONAL MAXIMUM USABLE FREQUENCIES AND TOTAL ELECTRON CONTENT

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, voc content is the least

REPORT 888-2-1990 SHORT-TERM FORECASTING OF CRITICAL FREQUENCIES@ OPERATIONAL MAXIMUM USABLE FREQUENCIES AND TOTAL ELECTRON CONTENT

Standard Association of Australia （SAA）, voc content is the least

AS 1012.4.1:2014 Methods of testing concrete, Method 4.1: Determination of air content of freshly mixed concrete — Measuring reduction in concrete volume with increased air pressure
AS 1289.5.4.2:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Assignment of maximum dry density and optimum moisture content values
AS 1289.5.4.2:2007(R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Assignment of maximum dry density and optimum moisture content values

AT-ON, voc content is the least

OENORM EN ISO 11890-2:2020 Paints and varnishes - Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020)

CH-SNV, voc content is the least

SN EN ISO 11890-2:2020 Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020)