ZH
RU
ES
Copper ion detection
Copper ion detection, Total:499 items.
In the international standard classification, Copper ion detection involves: Organic chemicals, Non-destructive testing, Electronic component assemblies, Non-metalliferous minerals, Paints and varnishes, Power stations in general, Products of non-ferrous metals, Non-ferrous metals, Products of the chemical industry, Vocabularies, Water quality, Protective equipment, Galvanic cells and batteries, Analytical chemistry, Sugar. Sugar products. Starch, Metalliferous minerals, Air quality, Testing of metals, Products of the textile industry, Construction materials, Ferrous metals, Soil quality. Pedology, Radiation protection, Pumps, Inorganic chemicals, Ferroalloys, Construction industry, Occupational safety. Industrial hygiene, Farming and forestry, Road engineering, Road vehicle systems, Coals, Tobacco, tobacco products and related equipment, Environmental protection, Electronic tubes, Optics and optical measurements, Fertilizers, Semiconductor devices, Pipeline components and pipelines, Fruits. Vegetables, Geology. Meteorology. Hydrology, Mining equipment, Electric road vehicles, Rubber, General methods of tests and analysis for food products, Paint ingredients, Meat, meat products and other animal produce, Protection against crime, Tea. Coffee. Cocoa, Wastes, Agricultural machines, implements and equipment, Motor cycles and mopeds, Burners. Boilers, Wind turbine systems and other alternative sources of energy, Animal feeding stuffs, Cereals, pulses and derived products, Laboratory medicine, Protection against electric shock, Semiconducting materials, Terminology (principles and coordination), Leather technology, Plastics, Astronomy. Geodesy. Geography, Fuels, Pulps, Paper and board, Iron and steel products, Welding, brazing and soldering, Sterilization and disinfection, Electrical wires and cables, Spices and condiments. Food additives.
HU-MSZT, Copper ion detection
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Copper ion detection
- GB/T 27581-2011 Electromagnetic interference shielding film.Electroless copper plating solution.Method of determining concentration of Ni and Cu
- GB/T 6824-2008 Determination for release rate of cupper-ion for antifouling paint on ship bottom
- GB/T 36146-2018 Rolled copper foil for lithium ion battery
- GB/T 6824-1986 Determination for leaching rate on raft of copper ion for antifouling paint on ship bottom
- GB 6824-1986 Determination for leaching rate on raft of cupper ion for antifouling paint on ship bottom
- GB/T 30128-2013 Textiles.Testing and evaluation for negative-ion concentration
- GB/T 42272-2022 The method for determining the chloride diffusion coefficient for cement mortar
- GB/T 11446.7-1997 Test method for trace chloride, nitrate, phosphate, sulfate in electronic grade water by ion-chromatography
- GB/T 20675-2006 General test method in salt industry Determination of copper ion (AAS)
- GB/T 17593-1998 Textiles--Test method of heavy metal ions--Atomic absorption spectrophotometry
- GB/T 42276-2022 Determination of fluorine ion and chloride ion in silicon nitride powder—Ion chromatography method
- GB/T 11446.7-2013 Test method for trace anion in electronic grade water by ion chromatography
- GB/T 29400-2012 Determination of microamount of inorganic anions in fertilizers by ion chromatography
- GB/T 5121.27-2008 Methods for chemical analysis of copper and copper alloys.Part 27:The inductively coupled plasma atomic emission spectromertric method
- GB/T 32794-2016 Pig iron contenting nickel.Determination of nickel, cobalt, chromium, copper, phosphorus content.Inductively coupled plasma atomic emission spectrometry
- GB/T 24585-2009 Ferronickel.Determination of phosphorus，
manganese，chromium，copper，cobalt and silicon contents.Inductively coupled plasma atomic emission spectrometric method
- GB/T 15251-1994 Rubber--Determination of free sulpher--Copper spiral method
- GB/T 23978-2009 Liquid dyes.Determination of chloride of chloride ion.Ion chromatography
- GB/T 32650-2016 Determining the content of trace elements in arenaceous quartz by inductively coupled plasma mass spectrometry (ICP-MS)
- GB/T 3884.5-2012 Methods for chemical analysis of copper concentrates.Part 5:Determination of fluoride content.Ion selective electrode method
- GB/T 24194-2009 Ferrosilicon.Determination of aluminium,clacium,managanese,chromium,titanium,copper,phosphorus and nickel content.Inductively coupled plasma atomic emission spectrometric method
- GB/T 30376-2013 Determination of iron,manganese,copper,zinc,calcium,magnesium, potassium, sodium, phosphorus, sulfur in tea.Inductively coupled plasma atomic emission spectrometry
- GB/T 31197-2014 Inorganic chemicals for industrial use.Determination of impurity anions.Ion chromatography method
- GB/T 32193-2015 Standard practice for testing flame ionization detectors used in gas or supercritical fluid chromatography
- GB/T 10267.6-1988 Method for analysis of calcium metal--The determination of iron,nickel,copper and manganese in calcium metal by atomic absorption spectrophotometry after extractive separation
- GB/T 3884.12-2010 Methods for chemical analysis of copper concentrates.Part 12:Determination of fluoride content and chloride content.Ion chromatography
- GB/T 24876-2010 Determination of seven anions in waste water from livestock and poultry farm-Ion chromatography
- GB/T 12604.8-2014 Non-destructive testing.Terminology.Terms used in neutron testing
- GB/T 12604.8-1995 Terminology for nondestructive testing--Neutron testing
- GB/T 24580-2009 Test method for measuring Boron contamination in heavily doped n-type silicon substrates by secondary ion mass spectrometry
- GB/T 24575-2009 Test method for measuring surface sodium, aluminum, potassium, and iron on silicon and epi substrates by secondary ion mass spectrometry
- GB/T 13173.3-1991 Determination of nonionic surface active agents in detergents.Ion exchange method
Professional Standard - Civil Aviation, Copper ion detection
Anhui Provincial Standard of the People's Republic of China, Copper ion detection
- DB34/T 2221-2014 Electronic Copper Foil for Li-ion Batteries
- DB34/T 2271-2014 Determination of cold miscellaneous copper copper, arsenic, lead, bismuth, antimony, zinc, nickel electrolytic-inductively coupled plasma atomic emission spectrometry
- DB34/T 2581-2015 Method for chemical analysis of copper arsenic filter cake Determination of rhenium content Inductively coupled plasma atomic emission spectrometry
- DB34/T 3805-2021 Methods of chemical analysis of copper anode slime - Determination of barium content - Alkali fusion-inductively coupled plasma atomic emission spectrometry
- DB34/T 2374-2015 Determination of Sulfate, Nitrate, Nitrite, Phosphate, Fluoride and Chloride in Coal Mine Water by Ion Chromatography
RO-ASRO, Copper ion detection
German Institute for Standardization, Copper ion detection
- DIN 54402:1985 Testing of ion exchangers; determination of the total capacity of anion exchangers
- DIN 54410:1985 Testing of ion exchangers; determination of density
- DIN 38406-7:1991 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of copper by atomic absorption spectrometry (AAS) (E 7)
- DIN 38406-7:1991-09 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of copper by atomic absorption spectrometry (AAS) (E 7)
- DIN EN ISO 14911:1999 Water quality - Determination of dissolved Li<(hoch)+>, Na<(hoch)+>, NH<(Index)4><(hoch)+>, K<(hoch)+>, Mn<(hoch)2+>, Ca<(hoch)2+>, Mg<(hoch)2+>, Sr<(hoch)2+> and Ba<(hoch)2+> using ion chromatography - Method for water and waste water (ISO 14911:1998); G
- DIN CEN/TS 15605:2008 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry; German version CEN/TS 15605:2007
- DIN EN 15605:2010-12 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry; German version EN 15605:2010
- DIN 38406-16:1990 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of zinc, cadmium, lead, copper, thallium, nickel, cobalt by voltammetry (E 16)
- DIN 38405-1:1985-12 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1)
- DIN 38405-17:1981 German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Borate Ions (D 17)
- DIN 38405-5:1985-01 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of sulfate ions (D 5)
- DIN 38406-16:1990-03 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of zinc, cadmium, lead, copper, thallium, nickel, cobalt by voltammetry (E 16)
- DIN 54411:2004 Testing of ion exchangers - Recycling method for testing ion exchangers and polymer adsorption resins
- DIN 38405-1:1985 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1)
- DIN 38405-5:1985 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of sulfate ions (D 5)
- DIN 54403:2009 Testing of ion exchangers - Determination of the total capacity of cation exchangers
- DIN 54402:2009 Testing of ion exchangers - Determination of the total capacity of anion exchangers
- DIN 54403:2009-04 Testing of ion exchangers - Determination of the total capacity of cation exchangers
- DIN 54402:2009-04 Testing of ion exchangers - Determination of the total capacity of anion exchangers
- DIN 38405-9:1979 German standard methods for examination of water, waste water and sludge; anions (group D), determination of nitrate ion (D9)
- DIN EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry; German version EN 15605:2010
- DIN 54402:2001 Testing of ion exchangers - Determination of the total capacity of anion exchangers
- DIN 54403:2001 Testing of ion exchangers - Determination of the total capacity of cation exchangers
- DIN CEN/TR 16269:2011-12*DIN SPEC 33965:2011-12 Ambient air - Guide for the measurement of anions and cations in PM<(Index)2,5>; German version CEN/TR 16269:2011
- DIN EN 14977:2006-09 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test; German version EN 14977:2006
- DIN VDE V 0682-417:2013 Live working - Voltage detectors - Distance voltage detector
- DIN 53345-2:1978 Testing of fat liquors and greases for leather; methods of analysis, determination of ionity
- DIN 18723-6:1990 Field procedure for precision testing of surveying instruments; electro-optical distance measuring instruments for short ranges
- DIN 6801-1:2019-09 Procedures of dosimetry with probe-type detectors for proton and ion radiation - Part 1: Ionization chambers
Professional Standard - Geology, Copper ion detection
- DZ/T 0064.51-1993 Groundwater quality testing methods - Determination of chloride, fluoride, bromide, nitrate and sulfate by ion chromatography
- DZ/T 0064.22-1993 Groundwater quality inspection method Determination of copper, lead, zinc, cadmium, manganese, chromium, nickel, cobalt, vanadium, tin, beryllium and titanium by inductively coupled plasma atomic emission spectrometry
- DZ/T 0064.42-1993 Groundwater Quality Inspection Method Determination of Strontium and Barium by Inductively Coupled Plasma Atomic Emission Spectrometry
- DZ/T 0064.28-1993 Groundwater quality testing methods - Determination of potassium, sodium, lithium and ammonium by ion chromatography
- DZ/T 0064.54-1993 Groundwater Quality Examination Method Determination of Fluoride by Ion Selective Electrode
- DZ/T 0064.57-1993 Groundwater quality testing method Nessler's reagent colorimetric method for the determination of ammonium ions
- DZ/T 0064.21-1993 Groundwater quality inspection methods- Electrothermal atomization atomic absorption spectrometry for the determination of copper, lead, zinc, cadmium, cobalt and chromium
- DZ/T 0064.11-1993 Groundwater quality testing method Determination of arsenic by gas-liquid separation hydride atomic fluorescence method
- DZ/T 0064.80-1993 Determination of 39 elements such as lithium by plasma mass spectrometry
Association Francaise de Normalisation, Copper ion detection
- NF A08-702*NF EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
- NF T90-048*NF EN ISO 14911:1999 Water quality - Determination of dissolved Li+, Na+, NH 4+, K+, Mn 2+, Ca 2+, Mg 2+, Sr 2+ and Ba 2+ using ion chromatography - Method for water and waste water.
- NF EN 15605:2010 Cuivre et alliages de cuivre - Analyse par spectrométrie d'émission optique avec source à plasma induit par haute fréquence
- NF A06-701:1967 Chemical analysis of copper and copper alloys. Dissolving electrolytic determination of copper lead separation.
- NF EN ISO 10304-4:2022 Qualité de l'eau - Dosage des anions dissous par chromatographie des ions en phase liquide - Partie 4 : dosage des ions chlorate, chlorure et chlorite dans des eaux faiblement contaminées
- NF EN 1787:2022 Produits alimentaires - Détection par spectroscopie RPE d'aliments ionisés contenant de la cellulose
- FD X43-008*FD CEN/TR 16269:2011 Ambiant air - Guide for the measurement of anions and cations in PM2,5
- NF C48-228:1987 Intrusion detection - Shock detectors, runner and ball - Specific standard.
- NF C93-024/A2:1989 Electronic Components
Insulation displacing terminations
Test specification for wires with copper or copper alloy conductor
Detail requirements
- NF T90-014:1952 WATER TESTING. DETERMINATION OF CHLORINE IONS.
- NF EN 13708:2022 Produits alimentaires - Détection par spectroscopie RPE d'aliments ionisés contenant des sucres cristallisés
- NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
- FD CEN/TR 16269:2011 Air ambiant - Guide pour le mesurage des anions et des cations dans la fraction PM2,5
- NF EN 1786:1997 Produits alimentaires - Détection d'aliments ionisés contenant des os ou des arêtes - Méthode par spectroscopie RPE.
- NF T90-601:2011 Ion exchange resins - Test release.
GM North America, Copper ion detection
Professional Standard - Electricity, Copper ion detection
- DL/T 1202-2013 Analytical methods for copper and iron in steam and water in fossil fuel power plants.Stripping voltammetry polarography
- DL/T 954-2005 Analysis of water and steam in fossil fuel power plant Determination of fluoride, acetate, formate, chloride, nitrite, nitrate, phosphate and sulfate by ion chromatography
- DL/T 301-2011 Analytical method of steam and water in power plant. Determination of trace cations by ion chromatography
- DL/T 2056-2019 Ion exchange resin and limestone powder particle size detection method laser diffraction method
Professional Standard - Electron, Copper ion detection
- SJ/T 11483-2014 Electrodeposited copper foil for lithium ion battery
- SJ/T 31068-1994 Requirements of readiness and methods of inspection and assessment for ion implantation machines
Hubei Provincial Standard of the People's Republic of China, Copper ion detection
- DB42/T 1092-2015 Electrolytic Copper Foil for Li-ion Batteries
- DB42/T 1622-2021 Determination of total amount of lead, chromium, copper, nickel and zinc in soil by inductively coupled plasma emission spectrometry
Guangdong Provincial Standard of the People's Republic of China, Copper ion detection
- DB44/T 837-2010 Electrolytic Copper Foil for Li-ion Batteries
- DB4403/T 20-2019 Detection method of electric vehicle on-board lithium-ion power battery system
- DB44/T 417-2007 Determination of bromate in drinking water using ion chromatography
PL-PKN, Copper ion detection
- PN C04860-12-1991 Ion exchange resins. Testing methods. Determination of the operating exchange capacity of cation exchange resins in hydrogen ion exchange
- PN C04860-01-1990 ?on exchange resin Testing methods Introduction
- PN C04860-02-1990 ?on exchange resins Testing methods Sampling
- PN C04860-11-1991 Ion exchange resins. Testing methods. Determination of the total strongly basic and weakly basic anion exchage resins
- PN C04860-10-1991 Ion exchange resins. Testing methods. Determination of the total strong acidic and weak acidic exchange capacitias of cationites
- PN C04860-05-1991 ?on exchange resins Testing methods Determination of granulometric composition (mesh analysis)
- PN C04860-04-1990 ?on exchange resins Testing methods Column for determination of exchange ' capacities under dynamie conditions
- PN-EN 17246-2019-12 P Fertilizers--Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD)
Group Standards of the People's Republic of China, Copper ion detection
- T/CES 174-2022 Test specification for lithium ion battery storage compartment
- T/MBJX 0004-2020 State of Charge Detection Method for Lithium-ion Power Batteries
- T/SPSTS 012-2019 Current collector of micro-porous copper foil for lithium-ion battery
- T/CSTM 00248-2020 Current collector of micro-porous copper foil for lithium-ion battery
- T/CTES 1004-2017 Filling-Testing and evaluation for negative-ion concentration
- T/CBMCA 031-2022 On-site detection method of negative ion functional building materials
- T/WSJD 20-2021 Specifications for quality control and testing of proton/carbon ion beam radiotherapy devices
- T/CMES 08008-2020 Determination of molybdenum, iron, phosphorus, copper, silicon, tin, antimony by inductively coupled plasma atomic emission spectrometry
- T/CECS 10206-2022 Determination of Chloride Ion and Sulfate Ion in Concrete by Ion Chromatography
- T/JGE 0056-2023 Jiangxi Green Ecology-Electrodeposited copper foil for lithium ion battery
- T/GDCKCJH 068-2022 Performance requirements and test methods for electrostatic eliminator of ion fan
- T/GERS 0001-2020 Test method of critical control points in the production of lithium-ion traction battery
- T/CES 172-2022 Test specification for battery management system of electrochemical energy storage station
- T/LFX 005-2023 Rapid detection method of chloride ion in inorganic fertilizer
- T/QAS 064-2021 Determination of copper, lead, zinc and arsenic in brines by inductively coupled plasma emission spectrometry
- T/CAQI 202-2021 Air ion detector
- T/GDBIA 06-2023 Specification for safety testing of ternary cathode materials for lithium-ion batteries
- T/CI 035-2022 Calibration method of magnification of X-ray detection equipment for lithium ion battery
- T/NAIA 0111-2022 Determination of lead, cadmium, copper and nickel in high-salt food by inductively coupled plasma mass spectrometry (ICP-MS)
- T/ATCRR 06-2019 Echelon used lithium ion battery—Test method
- T/NXCL 026-2023 Method for determination of beryllium bronze β phase
- T/CIET 125-2023 Technical requirements for high performance extremely thin electrolytic copper foil for lithium ion batteries
- T/CIET 222-2023 Technical requirements for high-performance ultra-thin electrolytic copper foil for lithium-ion batteries
- T/SEIA 001-2020 General technical requirements and test method of electric bicycles-cell or battery
- T/CPCIF 0249-2023 Determination of N-methyldiethanolamine in industrial circulating water—Ion chromatography
- T/CEC 461-2021 Operating procedures for performance testing of lithium-ion batteries used in electrochemical energy storage power stations
- T/GZTPA 0010-2021 Gas Chromatography Hydrogen Flame Ionization Method for Detection of Soluble Sugar in Guizhou Tea
- T/NAIA 099-2021 Determination of Inorganic Anion and Cation Content in Facility Soil by Ion Chromatography
- T/CNIA 0119-2021 Determination of trace anions in high-purity nitric acid for the electronics industry by ion chromatography
- T/FDSA 003-2019 Test method of the process challenge device（PCD）during low-temperature plasma of hydrogen peroxide
- T/CAS 318-2018 Halogen content detection for polymers of wire and cable- Oxygen bomb-ion chromatography
- T/CAS 406-2020 Evaluation of Air Odor in Cars: Coupling Analysis Method of Sensory and Photoion Detector
- T/CNIA 0117-2021 Determination of trace anion content in high-purity hydrofluoric acid for electronics industry Ion chromatography
YU-JUS, Copper ion detection
- JUS N.A0.391-1987 Detection and measurement of ionizing radiation by electric means. Terms and definitions.
- JUS H.P8.044-1984 Tasting of pesticides. Copper oxychloride, technical. Dttermination of free chloride content
- JUS H.B8.724-1981 Copper sulphate. Determination of free water
- JUS H.Z1.152-1987 Testing of industrial vvaters. Determination of non-ione surfactants
- JUS H.Z1.142-1984 Testing of industrial waters. Detarmination of fluoride by ion selective etectrode
- JUS H.Z1.145-1987 Testing of industrial vvaters. Detsrmination content of sodium by ion selective electrode
- JUS C.A4.217-1994 Copper and copper alloys - Testing of seamless round tubes from copper and copper alloys by eddy flow
- JUS H.Z1.149-1987 Testing of industrial vvaters. Determination of anionic surfactants. Spectrophotometric method
- JUS H.P8.041-1984 Testing of pesticides. Copper oxychlande. techmcal. Determination of copper content. Volumetric method
National Metrological Verification Regulations of the People's Republic of China, Copper ion detection
Qinghai Provincial Standard of the People's Republic of China, Copper ion detection
Korean Agency for Technology and Standards (KATS), Copper ion detection
- KS I ISO 14911:2009 Water quality-Determination of dissolved Li+, Na+,NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography-Method for water and waste water
- KS D ISO 13898-3:2010 Steel and iron-Determination of nickel, copper and cobalt contents-Inductively coupled plasma atomic emission spectrometric method-Part 3:Determination of copper content
- KS D ISO 13898-3-2010(2020) Steel and iron－Determination of nickel, copper and cobalt contents－Inductively coupled plasma atomic emission spectrometric method－Part 3：Determination of copper content
- KS D 0214-2021 Eddy current testing for copper and copper-alloy pipes and tubes
- KS D 0214-1991 Eddy current testing for copper and copper-alloy pipes and tubes
- KS D 0214-1986 Eddy current testing for copper and copper-alloy pipes and tubes
- KS M 0180-2009(2019) Standard test method for halogen(F, Cl, Br) and sulfur content by oxidative pyrohydrolytic combustion followed by ion chromatography detection (Combustion ion chromatography－CIC)
- KS I ISO 25140-2012(2017) Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
- KS D ISO 13898-4:2010 Steel and iron－Determination of nickel, copper and cobalt contents－Inductively coupled plasma atomic emission spectrometric method－Part 4：Determination of cobalt content
- KS D ISO 13898-2:2010 Steel and iron－Determination of nickel, copper and cobalt contents－Inductively coupled plasma atomic emission spectrometric method－Part 2：Determination of nickel content
- KS D ISO 13898-2-2010(2020) Steel and iron－Determination of nickel, copper and cobalt contents－Inductively coupled plasma atomic emission spectrometric method－Part 2：Determination of nickel content
- KS D ISO 13898-4-2010(2020) Steel and iron－Determination of nickel, copper and cobalt contents－Inductively coupled plasma atomic emission spectrometric method－Part 4：Determination of cobalt content
- KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
- KS B 0912-2001 Welding-Acceptance inspection of electron beam welding machines-Part 5:Measurement of run-out accuracy
- KS M 0180-2009 Standard test method for halogen(F, Cl, Br) and sulfur content by oxidative pyrohydrolytic combustion followed by ion chromatography detection (Combustion ion chromatography－CIC)
International Organization for Standardization (ISO), Copper ion detection
- ISO 14911:1998 Water quality - Determination of dissolved Li<(hoch)+>, Na<(hoch)+>, NH<(Index)4><(hoch)+>, K<(hoch)+>, Mn<(hoch)2+>, Ca<(hoch)2+>, Mg<(hoch)2+>, Sr<(hoch)2+> and Ba<(hoch)2+> using ion chromatography - Method for water and waste water
- ISO/CD 13548 Copper, lead and zinc sulfide concentrates — Determination of fluorine content by sodium hydroxide fusion and fluoride ion selective electrode detection
- ISO 24465:2023 Surface chemical analysis — Determination of the minimum detectability of surface plasmon resonance device
- ISO 19976-2:2019 Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method
- ISO/CD 17650:1972 Low-alloyed steel — Determination of Mn, P, Cr, Ni, Mo, Co, Cu, V, Ti, As and Sn — Inductively coupled plasma atomic emission spectrometric method
- ISO/DIS 17650:2023 Low-alloyed steel — Determination of Mn, P, Cr, Ni, Mo, Co, Cu, V, Ti, As and Sn — Inductively coupled plasma atomic emission spectrometric method
- ISO/PRF 3483 Copper and zinc sulfide concentrates — Determination of thallium — Acid digestion and inductively coupled plasma — Mass spectrometry
- ISO 3483:2023 Copper and zinc sulfide concentrates — Determination of thallium — Acid digestion and inductively coupled plasma-mass spectrometry
RU-GOST R, Copper ion detection
- GOST R 57060-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method
- GOST 34247-2017 Copper concentrate. Measurement of copper and impurities weight fraction by an inductively coupled plasma atomic emission spectrometry method
- GOST R 57061-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma mass spectrometry method
- GOST R ISO 13898-3-2007 Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 3. Determination of copper content
- GOST 34248-2017 Copper and polymetallic ores. Measurement of copper and impurities weight fraction by an inductively coupled plasma atomic emission spectrometry method
- GOST 15615-1979 Ion exchange rezins. Method for determination of chlorine ions content
- GOST 33914-2016 Juice products. Determination of anions by ion chromatography
- GOST R 55339-2012 Juice products. Determination of anions by ion exchange chromatography method
- GOST 34744-2021 Drinking water. Determination of bromide and iodide ions by capillary electrophoresis method
- GOST R ISO 13898-1-2006 Steel and iron. Inductively coupled plasma atomic emission spectrometric method for determination of nickel, copper and cobalt contents. Part 1. General requirements
- GOST R ISO 13898-2-2006 Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 2. Determination of nickel content
- GOST R ISO 13898-4-2007 Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 4. Determination of cobalt content
- GOST R 54921-2012 Zink concentrates. Atomic emission spectroscopy with inductively coupled plasma. Determination of copper, lead, cadmium, iron, aluminum, cobalt, antimony, manganese, arsenic and indium
- GOST 33975-2016 Juice products. Determination of cations (potassium, sodium, calcium and magnesium) by ion chromatography method
- GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection
- GOST 20422-1989 Pulp, paper and board. Methods for determination of chloride-ions and sulphate-ions fraction of total mass
- GOST 33206-2014 Copper and complex ores, and products of their processing. Atomic emission spectrometry with inductively coupled plasma method for weight fraction measurement of copper, zinc, lead, bismuth, cadmium, arsenic, antimony
- GOST R 54352-2011 Food common salt. Determination of a mass fraction of magnesium-ion and calcium-ion by complexonometric method
American Society for Testing and Materials (ASTM), Copper ion detection
- ASTM D8234-19 Standard Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection
- ASTM D5217-91(2004) Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
- ASTM E1140-95(2000) Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography
- ASTM E427-95(2000) Standard Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode)
- ASTM D5217-91(1998) Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
- ASTM D5217-91(2009) Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
- ASTM E1511-93(2017) Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
- ASTM E1511-93(2010) Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
- ASTM D5217-17 Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
- ASTM D3049-89(2003) Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
- ASTM D7994-17 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatograp
- ASTM D5794-95(2002) Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
- ASTM D5794-95 Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
- ASTM D5794-95(2008) Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
- ASTM D5794-95(2014) Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
- ASTM D4548-91(1996) Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
- ASTM D4548-11(2019) Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
Japanese Industrial Standards Committee (JISC), Copper ion detection
- JIS K 0556:1995 Testing methods for determination of anions in highly purified water
Guangxi Provincial Standard of the People's Republic of China, Copper ion detection
- DB45/T 1152-2015 Ion Chromatography Method for Detection of Sulfite Ion and Phosphate Ion Content in Intermediate Products of Sugar Production Process
Taiwan Provincial Standard of the People's Republic of China, Copper ion detection
- CNS 8044-1981 Method for Determination of Copper in Ores (Cupric Ammonia Absorptiometric Method)
- CNS 7439-1981 Method of Test for Ammonium Ion in Water
- CNS 5860-1980 Method of Test for Hydroxide Ion in Water and Wastewater
- CNS 6232-1980 Method of Test for Nitrate Ion in Water
- CNS 5858-1981 Methods of Test for Chloride Ion in Waste Water
- CNS 6228-1980 Method of Test for Bromide in Water(Colorimetric Method)
- CNS 6230-1980 Method of Test for Iodide in Water(Colorimetric Method)
- CNS 12906-1991 Methods of Test for Copper in Nickel Materials for Electron Tubes
- CNS 8600-1982 Method of Test for Sulfide Ion in Industrial Waste Water
- CNS 8599-1982 Method of Test for Sulfite Ion in Industrial Waste Water
- CNS 5590-1980 Method of Test for Chloride in Trichlorotrifluoroethane
- CNS 13171-1993 Method of Test for Fertilizers-Determination of Copper Content
- CNS 8602-1982 Method of Test for Sulfate Ion in Industrial Waste Water - Turbidity Method
- CNS 5862-1984 Method of Test for Sulfate Ion in Water and Wastewater (Gravimetric Method)
- CNS 8419-1982 Method of Test for Cyanide in Industrial Waste Water Mercury Thiocyanate Method
Association of German Mechanical Engineers, Copper ion detection
- VDI 2452 Blatt 2-1975 Gaseous air pollution measurement; determination of fluoric ion concentration; preseparation and electrometric detection
- VDI 2466 Blatt 2-2008 Gaseous emission measurement - Measurement of methane - Automatic method - Flame ionisation detector (FID)
- VDI 3860 Blatt 3-2011 Measurement of landfill gas - Measurement of surface emissions using the flame ionisation detector (FID)
国家质量监督检验检疫总局, Copper ion detection
- SN/T 4377-2015 Determination of impurity elements in copper and copper alloy scraps by inductively coupled plasma atomic emission spectrometry
- SN/T 4682-2016 Determination of cobalt, iron, nickel, manganese and copper content in cobalt concentrate by inductively coupled plasma atomic emission spectrometry
- SN/T 4757-2017 Determination of silicon, aluminum, manganese, phosphorus, copper, nickel, chromium and titanium in exported ferrovanadium by inductively coupled plasma atomic emission spectrometry
- SN/T 4815-2017 Determination of fluoride ions in imported and exported food animals by ion chromatography
- SN/T 4852-2017 Evaluation Guide for Solid Phase Extraction Columns for Food Testing Polymer Ion Exchange Columns
SE-SIS, Copper ion detection
- SIS SS 11 43 06-1984 Non-destructive testing - Eddy current testing - Copper and copper alloys - Tubes
- SIS SS IEC 692:1984 Nuclear instrumentation — Density meters utilizing ionizing radiation — Definitions and test methods
European Committee for Standardization (CEN), Copper ion detection
- EN ISO 14911:1999 Water Quality - Determination of Dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ Using Ion Chromatography - Method for Water and Waste Water ISO 14911:1998
- EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
- PD CEN/TR 16269:2011 Ambient air - Guide for the measurement of anions and cations in PM2@5
- EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
Military Standard of the People's Republic of China-General Armament Department, Copper ion detection
- GJB 9788-2020 Specification for alarms for poison detection using ion migration method
国家粮食和物资储备局, Copper ion detection
- LS/T 6136-2019 Grain and Oil Detection Rapid Extraction-Inductively Coupled Plasma Mass Spectrometry for Determination of Manganese, Copper, Zinc, Rubidium, Strontium, Cadmium and Lead in Rice
Danish Standards Foundation, Copper ion detection
- DS/EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
- DS/EN 1971-1:2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- DS/CEN/TR 16269:2011 Ambient air - Guide for the measurement of anions and cations in PM2,5
- DS/EN 1971-2:2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
- DS/EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
- DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
Lithuanian Standards Office , Copper ion detection
- LST EN 15605-2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
- LST EN 1971-1-2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- LST EN 1971-2-2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
- LST EN 14977-2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
AENOR, Copper ion detection
- UNE-EN 15605:2011 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
- UNE-EN 1971-1:2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- UNE-CEN/TR 16269:2013 IN Ambient air - Guide for the measurement of anions and cations in PM2,5
- UNE 7351:1975 DETERMINATION OF COPPER ALLOYS AND COPPER CONTENT BY ATOMIC ABSORPTION METHOD.
- UNE-EN 1971-2:2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
- UNE 7350:1976 DETERMINATION OF COPPER ALLOYS AND COPPER LEAD CONTENT BY ATOMIC ABSORPTION METHOD.
- UNE-EN 14977:2007 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
British Standards Institution (BSI), Copper ion detection
- BS EN 15605:2010 Copper and copper alloys.Inductively coupled plasma optical emission spectrometry
- 20/30372090 DC BS ISO 23156. Ferronickels. Determination of phosphorus, manganese, chromium, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method
- BS EN 1971-2:2019 Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Test with an internal probe on the inner surface
- BS ISO 24465:2023 Surface chemical analysis. Determination of the minimum detectability of surface plasmon resonance device
- BS ISO 19976-2:2019 Copper, lead and zinc sulfide concentrates. Determination of cadmium - Acid digestion and inductively coupled plasma atomic emission spectrometric method
- BS PD CEN/TS 16826-2:2015 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for snap frozen tissue. Isolated proteins
- BS EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5% ammonia test
- BS 7310:1990 Specification for ion-selective electrodes, reference electrodes, combination electrodes and ion-selective electrode meters for determination of ions in solution
- BS EN 17246:2019 Fertilizers. Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD)
- PD CEN/TS 17811:2022 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for urine and other body fluids. Isolated cell free DNA
- BS EN ISO 20184-1:2018 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for frozen tissue - Isolated RNA
- BS ISO 13547-2:2014 Copper, lead, zinc and nickel sulfide concentrates. Determination of arsenic. Acid digestion and inductively coupled plasma atomic emission spectrometric method
- BS PD CEN/TS 16827-1:2015 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for FFPE tissue. Isolated RNA
- BS PD CEN/TS 16826-1:2015 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for snap frozen tissue. Isolated RNA
- BS EN 16943:2017 Foodstuffs. Determination of calcium, copper, iron, magnesium, manganese, phosphorus, potassium, sodium, sulfur and zinc by ICP-OES
- BS ISO 3483:2023 Copper and zinc sulfide concentrates. Determination of thallium. Acid digestion and inductively coupled plasma-mass spectrometry
Professional Standard - Agriculture, Copper ion detection
- JJG(教委) 020-1996 Verification Regulations for Ion Chromatography
- SN/T 5056-2018 Determination of fluoride ion, nitrite ion, nitrate ion, phosphate ion and sulfate ion in sodium chloride by ion chromatography
- SN/T 5052-2018 Ion chromatography for the determination of fluoride, chloride, sulfate and nitrate ions in water-soluble carbonates
- NY/T 1121.17-2006 Soil Testing.Part 17:Method for determination of soil chloride iron content
- NY/T 1121.18-2006 Soil Testing.Part 18:Method for determination of soil sulfate content
- JJG(教委) 015-1996 Verification Regulations for Inductively Coupled Plasma Atomic Emission Spectrometer
- NY/T 1121.5-2006 Soil Testing.Part 5:Method for determination of soil cation exchange capacity in calcareous soil
- SN/T 5051-2018 Determination of Fluoride, Chloride, Sulfate and Nitrate in Water-Soluble Phosphates by Ion Chromatography
- NY/T 2277-2012 Determination of organic acids and anions in fruits and vegetables.Ion chromatography
- SN/T 5580-2023 Determination of Gold Content in Copper Concentrate Enrichment and Separation of Foam-based Granular Activated Carbon-Inductively Coupled Plasma Emission Spectrometry
- JAP-045 Copper terephthalate detection method
- NY/T 4363-2023 Determination of copper, zinc, arsenic, chromium, cadmium, lead and mercury in livestock and poultry solid manure by inductively coupled plasma mass spectrometry
Professional Standard - Construction Industry, Copper ion detection
- JGJ/T 322-2013 Technical specification for test of chloride ion content in concrete
Shandong Provincial Standard of the People's Republic of China, Copper ion detection
- DB37/T 4201-2020 Rapid Screening and Detection Method for Chloride Ion Content in Cement
- DB37/T 3968-2020 Determination of lead, cadmium, chromium, arsenic, copper and zinc in aquaculture wastewater by inductively coupled plasma mass spectrometry
- DB37/T 3937-2020 Determination of lead, cadmium, chromium, nickel, copper, zinc, arsenic and mercury in organic fertilizers by inductively coupled plasma mass spectrometry
- DB37/T 4078-2020 Continuous monitoring of volatile organic compounds in ambient air by gas chromatography-hydrogen flame ionization detector/mass spectrometry detector
- DB37/T 3977-2020 Determination of lead, cadmium, chromium, nickel, copper, zinc, arsenic and mercury in manure of livestock and poultry by inductively coupled plasma mass spectrometry
Professional Standard - Commodity Inspection, Copper ion detection
- SN/T 0736.14-2011 Test method of import and export fertilizers.part 14:Determination of trace inorganic anions by ion chromatography method
- SN/T 4310-2015 Determination of chloride,nitrate and sulphate in phosphoric acid for import and export.Ion chromatography
- SN/T 2501-2010 Determination of gold in copper concentrates for import by anion exchange-flame atomic absorption spectrometry
- SN/T 2259-2009 Determination of chemical components in high purity copper cathode.Inductively coupled plasma atomic emission spectrometry
- SN/T 2918-2011 Determination of sulfite in food for export.Ion chromatography method
- SN/T 3367-2012 Determination of titanium,aluminum,silicon,phosphor,copper and manganese content in ferrotitanium.Inductively coupled plasma atomic emission spectrometry
- SN/T 3516-2013 Determination of lead iron cadmium copper tin antimony in high-purity zinc.Inductively coupled plasma mass spectrometry
- SN/T 2047-2008 Determination of impurities in copper concentrates for import.Inductively coupled plasma atomic emission spectrometry
- SN/T 3510-2013 Determination of arsenic、cadmium、copper、nickel、lead、zinc in lead ore for import and export.Inductively coupled plasma atomic emission spectrometric method
- SN/T 3007-2011 Determination of arsenic,lead,copper,iron,selenium,bismuth content in metal antimony. Inductively coupled plasma atomic emission spectrometry
- SN/T 2056-2008 Determination of lead,arsenic,cadmium,copper,iron content in tea for import and export.Inductively coupled plasma atomic emission spectrometric method
- SN/T 1796-2006 Determination of arsenic,chromium,copper in wood and wood-based products for import and export.Inductively coupled plasma atomic emission spectrometry
- SN/T 3469.2-2013 Determination of flurine in import copper matte or sintered copper material by ion.Selective electrode
- SN/T 2264-2009 Determination of Cu,Fe,Mg,Mn,Si,Ti,V,Zn and Zr in aluminun alloys.Inductively coupled plasma atomic emission spectrometry
- SN/T 2262-2009 Determination of aluminum,arsenic,calcium,copper,magnesium,manganese,phosphorus,lead,zincum in iron ores.Inductively coupled plasma atomic emission spectrometry
- SN/T 3365-2012 Determination of lead,iron,titanium,copper,manganese,zinc,chromium,aluminium content in quartz sand.Inductively couple plasma atomic emission spectrometric method
- SN/T 2945-2011 Determination of lead,cadmium,chromium,copper,manganese and zinc in rubber and rubber products.Inductively coupled plasma atomic emission spectrometric method
- SN/T 3695.1-2014 Determination of mirex in electrical and electronic products.Part 1:Gas chromatography-flame ionization detector method
- SN/T 2049-2008 Determination of copper,nickel,lead,manganese,cadmium,titanium in food grade of phosphoric acid for import and export.Inductively coupled plasma atomic emission spectrometric method
- SN/T 3343-2012 Determination of manganese,phosphorus,silicon,chromium,nickel,copper,molybdenum,and titanium in Stainless steel.Inductively coupled plasma atomic emission spectrometry
- SN/T 2638.2-2010 Determination of iron,aluminum,magnesium,calcium,titanium, phosphorus,nickel,copper,zinc in manganese ores for import and export.Inductively coupled plasma atomic emission spectrometric method
- SN/T 3594-2013 Aluminum waste.Determination of ferrum,copper,calcium, magnesium,manganese,zinc,titanium,chromium, nickel,vanadium and cadmium.Inductively coupled plasma atomic emission spectrometry
- SN/T 3595-2013 Zinc waste.Determination of ferrum, aluminum, calcium, magnesium, manganese,copper, titanium,chromium,nickel,vanadium and cadmium.Inductively coupled plasma atomic emission spectrometry
- SN/T 2686-2010 Determination of beryllium,chromium,nickel,copper,antimony,cobalt,barium,cadmium,zinc and bismuth in used mechanical and electrical products.Inductively coupled plasma-atomic emission spectrometry
- SN/T 3911-2014 Determination of water soluble fluorine in building sands.Ion chromatography
Jilin Provincial Standard of the People's Republic of China, Copper ion detection
- DB22/T 1531-2011 Determination of copper, lead and cadmium in ginseng by inductively coupled plasma mass spectrometry
- DB22/T 1689-2012 Determination of copper, iron, manganese, zinc, boron, molybdenum in fertilizers by inductively coupled plasma spectrometry
- DB22/T 1992-2013 Determination of mercury, cadmium, arsenic, lead, copper, zinc, selenium in farmland irrigation water by inductively coupled plasma mass spectrometry
American National Standards Institute （ANSI), Copper ion detection
Professional Standard - Public Safety Standards, Copper ion detection
- GA/T 1918-2021 Forensic Science Nitrite Ion Test Chemistry and Ion Chromatography
- GA/T 1421-2017 Detection of Common Inorganic Ions in Forensic Science Explosion Residues by Ion Chromatography
- GA/T 1628-2019 Glyphosate Detection in Forensic Science Biological Samples by Ion Chromatography-Mass Spectrometry
Professional Standard - Non-ferrous Metal, Copper ion detection
- YS/T 586-2006 Method for chemical analysis of copper and copper alloys. The inductively copuled plasma atomic emission spectromertic method
- YS/T 952-2014 Methods for chemical analysis of multi-metallic ores.Determination of copper and molybdenum contents.Inductively coupled plasma-atomic emission spectrometry
- YS/T 668-2008 The sampling method of physical and chemical testing for copper and copper alloys
- YS/T 990.5-2014 Methods for chemical analysis of copper matte.Part 5:Determination of fluorine content.Ion-selective electrode method
- YS/T 1073-2015 Chemical analysis methods of palladium-carbon.Determination of plumbum,cuprum and iron contents.Inductively coupled plasma-atomic emission spectrometry
- YS/T 478-2005 The method for electrical conductivity measurement of copper and copper alloys by use of eddy current
- YS/T 1047.7-2015 Methods for chemical analysis of copper magnetite.Part 7: Determination of copper,manganese,aluminium,calcium, magnestium,titanium and phosphorus contents.Inductively coupled plasma atomic emission spectrometric method
卫生健康委员会, Copper ion detection
- WS 816-2023 Quality control and testing standards for medical proton and heavy ion radiotherapy equipment
Shanxi Provincial Standard of the People's Republic of China, Copper ion detection
- DB14/T 915-2014 Determination of Copper and Zinc in Soil by Inductively Coupled Plasma Emission Spectrometry
工业和信息化部, Copper ion detection
- YS/T 1115.13-2016 Methods for chemical analysis of copper ores and tailings Part 13: Determination of fluorine content Ion-selective electrode method and ion chromatography
- YB/T 4739-2019 Determination of chromium, iron, phosphorus, aluminum, titanium, copper, manganese and calcium content by inductively coupled plasma atomic emission spectrometry
- YS/T 668-2020 Sampling methods for physical and chemical testing of copper and copper alloys
- YS/T 1562.1-2022 Methods for chemical analysis of tungsten-copper alloys Part 1: Determination of copper content by iodometry and inductively coupled plasma atomic emission spectrometry
- YS/T 1380-2020 Chemical analysis methods for rhodium compounds Determination of chloride ion and nitrate ion content Ion chromatography
- YS/T 1346-2020 Chemical Analysis Methods for Copper-Arsenic Filter Cake Determination of Rhenium Content by Inductively Coupled Plasma Atomic Emission Spectrometry
- YS/T 1314.5-2019 Methods for chemical analysis of silver slag from copper smelting Part 5: Determination of copper, antimony, bismuth, selenium, tellurium and tin contents by inductively coupled plasma atomic emission spectrometry
- YS/T 1103-2016 Ultrasonic (transverse wave) detection method for copper and copper alloy pipes
- HG/T 6117-2022 Determination of copper, nickel, lead, zinc and cadmium content in high-salt wastewater by inductively coupled plasma optical emission spectrometry
- YS/T 1115.12-2016 Methods for chemical analysis of copper ores and tailings - Part 12: Determination of amounts of copper, lead, zinc, nickel, cobalt, cadmium, magnesium and manganese by inductively coupled plasma atomic emission spectrometry
- YB/T 4908.2-2021 Determination of silicon, iron, phosphorus, boron, chromium, nickel, tungsten, copper, manganese and molybdenum content in vanadium-aluminum alloys by inductively coupled plasma atomic emission spectrometry
- HG/T 5747-2020 Determination of nickel, manganese, copper and zinc content in water treatment agent by inductively coupled plasma optical emission spectrometry (ICP-OES) method
Hebei Provincial Standard of the People's Republic of China, Copper ion detection
- DB13/T 2855-2018 Determination of molybdenum iron silicon, phosphorus and copper content by inductively coupled plasma atomic emission spectrometry
Liaoning Provincial Standard of the People's Republic of China, Copper ion detection
- DB21/T 3178-2019 Technical specification for non-destructive testing of chloride ion permeability resistance of highway engineering concrete (PERMIT ion migration method)
Professional Standard - Machinery, Copper ion detection
- JB/T 9361-1999 Test method for flame ionization detector of gas chromatography
- JB/T 9095-2008 Conventional nondestructive testing for forging and weldment of centrifuge and separator
国家能源局, Copper ion detection
- NB/T 33024-2016 Testing specifications for power lithium-ion batteries for electric vehicles
Professional Standard - Coal, Copper ion detection
- MT/T 202-2008 Determination of calcium ion and magnesium ion in coalmine water
- MT/T 252-2000 Determination method of potassium ion and sodium ion in coal mine water
- MT/T 203-1995 Determination method of calcium ion and magnesium ion in coal mine water
- MT 252-1991 Determination method of potassium ion and sodium ion in coal mine water
国家安全生产监督管理总局, Copper ion detection
- MT/T 202-2007 Determination of calcium ions and magnesium ions in coal mine water
Professional Standard - Tobacco, Copper ion detection
- YC/T 275-2008 Determination of citrate,phosphate and acetate in cigarette paper-Ion chromatography method
- YC/T 248-2008 Tobacco and tobacco products.Determination of inorganic anion.Ion chromatographic method
Yunnan Provincial Standard of the People's Republic of China, Copper ion detection
- DB53/T 422-2012 Determination of Phosphorus, Manganese, Titanium, Chromium, Copper, Vanadium in Ferrophosphorus - Inductively Coupled Plasma Atomic Emission Spectrometry
- DB53/T 510-2013 Determination of copper, zinc, arsenic, lead, cadmium, chromium, nickel in tobacco seed coating agent by inductively coupled plasma mass spectrometry
- DB53/T 424-2012 Determination of lead, cadmium, arsenic, copper and chromium in Yunyan extract by inductively coupled plasma mass spectrometry
ZA-SANS, Copper ion detection
- SANS 163-2:1995 Water quality - Determination of dissolved anions by liquid chromatography of ions Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
- SANS 163-1:1992 Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions Part 1: Method for water with low contamination
Professional Standard - Environmental Protection, Copper ion detection
- HJ/T 84-2001 Water quality.Determination of inorganic anions.Ion chromatography method
Professional Standard - Water Conservancy, Copper ion detection
- SL 86-1994 Determination of inorganic anions in water (Ion chromatography method)
国家市场监督管理总局、中国国家标准化管理委员会, Copper ion detection
- GB/T 37385-2019 Test method for chloride content of silicon—Ion chromatography method
- GB/T 5687.12-2020 Ferrochromium—Determination of phosphorus, aluminum, titanium, copper, manganese, calcium content—Inductively coupled plasma atomic emission spectrometric method
- GB/T 40395-2021 Determination of ammonium in methanol for industrial use—Ion chromatography
- GB/T 8704.10-2020 Ferrovanadium—Determination of silicon, manganese, phosphorus, aluminum, copper, chromium, nickel and titanium contents— Inductively coupled plasma atomic emission spectrometric method
Sichuan Provincial Standard of the People's Republic of China, Copper ion detection
- DB51/T 2004-2015 Ion Chromatography for Detection of Sulfate in High Purity Sodium Hydroxide
CEN - European Committee for Standardization, Copper ion detection
- PREN 1971-1-2019 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- PREN 1971-2-2019 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
Professional Standard - Ferrous Metallurgy, Copper ion detection
- YB/T 4394-2014 Molybdenum oxide.Determination of cooper, phosphorus, tin and antimony content.Inductively coupled plasma atomic emission spectrometry
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Copper ion detection
- GB/T 4702.6-2016 Chromium metal—Determination of iron, aluminium, silicon and copper content—Inductively coupled plasma atomic emission spectrometry method
- GB/T 34764-2017 Determination of copper,iron,zinc,manganese,boron and molybdenum content in fertilizers—Inductively coupled plasma optical emission spectroscopy
- GB/T 35664-2017 Determination of ammonium in the wet precipitation—Ion chromatography
- GB/T 35876-2018 Inspection of grain and oils—Determination of sodium,mgnesium, kalium, calcium, chromium, manganese, iron, copper, zinc, arsenic, selenium, cadmium and plumbum in cereals and derived products—Iductively cupled pasma-mss sectrometric method
- GB/T 35925-2018 Determination of impurity fluorine ion in water soluble chemicals—Ion chromatography method
- GB/T 36084-2018 Nanotechnology—Determination of copper, manganese and chromium ions in aqueous solution—Ultraviolet-visible spectrophotometry
- GB/T 33584.1-2017 Seawater quality requirements and analysis method for seawater cooling system—Part 1:Determination of calcium and magnesium
- GB/T 35665-2017 Determination of formate and acetate in the wet precipitation—Ion chromatography
海关总署, Copper ion detection
- SN/T 5306-2021 Determination of lead, arsenic, mercury, antimony and copper in naphtha by inductively coupled plasma mass spectrometry
Henan Provincial Standard of the People's Republic of China, Copper ion detection
- DB41/T 778-2013 Determination of Chloride Ion Content in Chemical Fertilizers by Ion Chromatography
National Metrological Technical Specifications of the People's Republic of China, Copper ion detection
- JJF 1172-2007 Calibration Specification for Volatile Organic Compounds Photo Ionization Detectors
Ningxia Provincial Standard of the People's Republic of China, Copper ion detection
- DB64/T 1733-2020 Soil Sulfate Ion Determination by Cation Exchange Resin Method
- DB64/T 1494-2017 Determination of Lead, Copper and Iron in Wine and Fruit Wine by Inductively Coupled Plasma Emission Spectrometry
Jiangsu Provincial Standard of the People's Republic of China, Copper ion detection
- DB32/T 4057-2021 Determination of 18 elements such as copper and cadmium in poultry meat by inductively coupled plasma mass spectrometry
Hunan Provincial Standard of the People's Republic of China, Copper ion detection
- DB43/T 1220-2016 Determination of copper, zinc, lead, cadmium, chromium, mercury and arsenic in soil by inductively coupled plasma-mass spectrometry
- DB43/T 2550-2023 Technical specifications for ohmic internal resistance detection of lithium-ion battery boxes for power energy storage
- DB43/T 2552-2023 Technical specification for polarization resistance detection of lithium-ion battery boxes for power energy storage
- DB43/T 2551-2023 Technical specification for polarized capacitance detection of lithium-ion battery boxes for power energy storage
- DB43/T 2553-2023 Technical specification for constant current charging time detection of lithium-ion battery clusters for power energy storage
Fujian Provincial Standard of the People's Republic of China, Copper ion detection
- DB35/T 1142-2011 Determination of Arsenic, Lead, Copper, Zinc, Cadmium, Chromium, Nickel in Soil by Inductively Coupled Plasma Mass Spectrometry
Professional Standard - Building Materials, Copper ion detection
- JC/T 1086-2008 The method for determining the chloride diffusion coefficient for cement
Professional Standard-Ships, Copper ion detection
- CB 20042-2012 Methods for Iron alloy of copper.Determination of micro zirconium content.Inductively coupled plasma-atomic emission spectromertric method
Standard Association of Australia （SAA）, Copper ion detection
- AS 3506:1987 Waters - Determination of filtrable synthetic anionic surfactants - Copper-ethylenediamine flame atomic absorption spectrometric method
United States Navy, Copper ion detection
Professional Standard - Aviation, Copper ion detection
- HB 20094.2-2012 Test method for determination of wear metals in operating liquid for aviation.Part 2: Inductively coupled plasma automic emission spectrometry (ICP-AES)
- HB 7054-1994 Quality inspection of ion-plated aluminum layer of titanium alloy fasteners
CZ-CSN, Copper ion detection
UNKNOWN, Copper ion detection
- GB 20077663-T-604 Flame ionization detector test method for gas chromatography/supercritical fluid chromatography
Jiangxi Provincial Standard of the People's Republic of China, Copper ion detection
- DB36/T 1633-2022 Determination of copper, lead, zinc, chromium, nickel content in soil by inductively coupled plasma emission spectrometry
Tianjin Provincial Standard of the People's Republic of China, Copper ion detection
- DB12/T 845-2018 Determination of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc in feed by inductively coupled plasma mass spectrometry
国家林业和草原局, Copper ion detection
- LY/T 3129-2019 Determination of total copper, zinc, iron and manganese content in forest soil by inductively coupled plasma optical emission spectrometry
American Society of Mechanical Engineers (ASME), Copper ion detection
- ASME SEC V B SE-243-2001 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes ASTM E243-97
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Copper ion detection
Society of Automotive Engineers (SAE), Copper ion detection
Inner Mongolia Provincial Standard of the People's Republic of China, Copper ion detection
- DB15/T 2603-2022 Determination of potassium, sodium, calcium, magnesium, copper, iron, manganese and zinc in pasture grass by inductively coupled plasma optical emission spectrometry
GOSTR, Copper ion detection
- GOST 33206-2020 Copper and complex ores, and products of their processing. Atomic emission spectrometry with inductively coupled plasma method of measurement of copper, zinc, lead, bismuth, cadmium, arsenic, antimony weight fraction
TR-TSE, Copper ion detection
- TS 2741-1977 DETECTION OF COPPER CORROSION FROM PETROLEUM PRODUCTS BY THE COPPER STRIP TARNISH TEST
Professional Standard - Chemical Industry, Copper ion detection
- HG/T 6107～6110-2022 Determination methods of sodium ions, chloride ion content, chemical oxygen demand (COD) and calcium and magnesium ions in waste sulfuric acid (2022)
US-CFR-file, Copper ion detection
- CFR 40-1065.260-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.260:Flame-ionization detector.
KR-KS, Copper ion detection
- KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
商务部, Copper ion detection
- SB/T 10922-2012 Determination of chromium, copper, total arsenic, cadmium, total mercury and lead in meat and meat products by inductively coupled plasma mass spectrometry