ZH
RU
ES

gel test strips

gel test strips, Total:498 items.

In the international standard classification, gel test strips involves: Plastics, Spices and condiments. Food additives, Rubber, Document imaging applications, Photography, Cinematography, Construction industry, Construction materials, Protection of and in buildings, Medical equipment, Adhesives, Packaging materials and accessories, Products of the textile industry, Semiconductor devices, Pharmaceutics, Biology. Botany. Zoology, Raw materials for rubber and plastics, Insulating materials, Reinforced plastics, Pipeline components and pipelines, Cork and cork products, Semi-manufactures of timber, Wood-based panels, Non-textile floor coverings, Non-destructive testing, Water quality, Protection against fire, Rubber and plastics products, Radiation measurements, Paints and varnishes, Paint ingredients, Interior finishing, Extraction and processing of petroleum and natural gas, Corrosion of metals, Road engineering, Soil quality. Pedology, Graphic technology, Veterinary medicine, Office machines, Radiation protection, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Lubrication systems, Lubricants, industrial oils and related products, Structures of buildings, General methods of tests and analysis for food products, Pumps, Measurement of volume, mass, density, viscosity, Elements of buildings, Products of the chemical industry.

SE-SIS, gel test strips

SIS SS 3165-1988 Drafting film - Polyester based drafting film with mat surface - Testing
SIS 22 77 01-1962 Concrete roofing tiles. Quality and test requirements
SIS SS 13 72 09-1980 Concrete testing — Hardened concrete — Testing age
SIS SS 13 72 20-1984 Concrete testing — Hardened shotcrete — Compressive strength of shotcreted test specimens
SIS SS-ISO 6199:1991 Micrographics — Microfilming of docu- ments on 16 mm and 35 mm silver-gelatin type microfilm — Operating procedures
SIS SS 13 72 39-1983 Concrete testing — Hardened concrete — Core bending test
SIS SS 13 71 23-1983 Concrete testing - Fresh concrete - Consistency - Flow table test
SIS SS 13 72 38-1983 Concrete testing - Hardened concrete - Pull out test
SIS SS 13 71 17-1982 Concrete testing - Fresh concrete - Flow test
SIS SS 13 71 14-1978 Concrete testing — Fresh concrete — Setting and hardening
SIS SS 13 72 26-1982 Concrete testing — Hardened concrete — Test specimens for frost testing
SIS SS 13 11 10-1984 Concrete testing — Hardened concrete - Compression testing machines
SIS SS 13 11 10-1980 Concrete testing — Hardened concrete — Compression testing machines
SIS SS 13 72 36-1983 Concrete testing - Hardened concrete - Freeze-test with de-icing chemicals
SIS SS 13 71 27-1983 Concrete testing — Fresh concrete — Bleeding
SIS SS 13 71 10-1980 Concrete testing — Fresh concrete — Consistency
SIS SS 13 71 13-1978 Concrete testing — Fresh concrete — Density
SIS SS 13 71 12-1978 Concrete testing — Fresh concrete — Bleeding
SIS SS 13 71 20-1983 Concrete testing - Fresh concrete - Sampling
SIS SS 13 71 25-1983 Concrete testing - Fresh concrete - Density
SIS SS 13 72 17-1980 Concrete testing — Hardened concrete — Density
SIS SS 13 71 22-1983 Concrete testing - Fresh concrete - Consistency - Vebe test
SIS SS 13 75 21-1981 Mortars — Testing — Water retention
SIS SS 13 75 22-1981 Mortars — Testing — Adhesion
SIS SS 13 72 13-1978 Concrete testing — Hardened concrete — Strength in splitting
SIS SS 13 72 15-1978 Concrete testing — Hardened concrete — Shrinkage
SIS SS 13 71 28-1983 Concrete testing - Fresh concrete - Chloride content
SIS SS 13 72 37-1983 Concrete testing - Hardened concrete - Rebound number
SIS SS 13 72 16-1978 Concrete testing — Hardened concrete — Frost resistance
SIS SS 13 72 44-1988 Concrete testing - Hardened concrete - Frost resistance
SIS SS 13 72 35-1983 Concrete testing - Hardened concrete - Chloride content
SIS SS 13 72 41-1986 Concrete testing - Hardened concrete - Abrasion resistance
SIS SS 13 72 31-1983 Concrete testing - Hardened concrete - Tensile strength of test specimens
SIS SS 13 71 21-1983 Concrete testing - Fresh concrete - Consistency - Slump test
SIS SS 13 72 30-1983 Concrete testing - Hardened concrete - Compressive strength of est specimens
SIS SS 13 72 25-1982 Concrete testing — Hardened concrete — Frost resistance — Frost testing with salt solution
SIS SS 13 71 09-1987 Concrete testing - Fresh concrete - Classification of consistency
SIS SS 13 72 12-1978 Concrete testing — Hardened concrete — Flexural strength
SIS SS 13 72 42-1988 Concrete testing - Hardened concrete - Depth of carbonation
SIS SS 13 72 14-1978 Concrete testing — Harde ned concrete — Impermeability
SIS SS 13 71 09-1988 Concrete testing - Fresh concrete - Classification of consistency
SIS SS 13 72 80-1984 Concrete testing — Reinforced concrete — Position of reinforcement

CZ-CSN, gel test strips

CSN 64 0181-1986 Plastics. Methods of thickness determination of films and sheets
CSN 01 3826-1990 Micrographics. Test microforms
CSN 66 6415-1969 Safety film. Demand on safety and testing
CSN ISO 10602:1994 Photography-Processed silver-gelatin type black-and-white film-Specifications for stability
CSN 66 6408-1974 Speed of reversal films. Testing. Markmg on the packing
CSN 77 0852-1986 Packaging adhesives. Determination of the elasticity of film
CSN 66 6405-1972 Speed of black and white reversal films. Testing. Marking on the paoking.
CSN 64 0602-1976 Deturminatian of locking of plastic ilms
CSN 62 1183-1981 Synthetic rubber latices Determination of coagulum content
CSN 03 8131-1973 Condensation chambre test
CSN 64 0610-1977 Plastics testing. Determination of the dimensional stability of plastic films
CSN 73 1373-1981 Testing of concrete by hardness testing methods
CSN 72 3156-1985 Testing of concrete pipes
CSN 64 0757-1977 Plastics testing. Determination of flammability of plastics in the form of film
CSN 72 3151-1970 Testing of concrete and reinforced-concrete pipes
CSN 72 3155-1987 Testing of concrete and reinforced-concrete pipes

Professional Standard - Chemical Industry, gel test strips

HG/T 3328-1980 Railway concrete sleeper (board) rubber sheet (sheet)
HG/T 3558-1988 Method for Determination of Moisture Content of Film Base
HG/T 2914-1997 Method for ditermination of the antiadhesion property of photographic film and film base
HG/T 3559-1988 Method for determination of adhesion fastness of base layer of film sheet
HG/T 3009-1999 Photographic film and film base-determination of thickness by mechanical scanning
HG/T 2700-1995 Test method for tightness of rubber gaskets
HG/T 3861-2006 Determination of nitrocellulose cotton gelling number of thinners and retarders
HG/T 4243-2011 Dedermination of silver content in medical dry-siliver film
HG/T 3137-1998 Specifications of plasticity testing cuting machine for rubber
HG/T 3137-2011 Technical specifications for rubber plasticity test cutting machine
HG/T 3801-2005 Testing and measuring methods for twin-screw extruder of rubber
HG/T 2412.1-1992 Test method for rubber thread - Determination of meter value of rubber thread
HG/T 4744-2014 Determination of average molecular weight and molecular weight distribution of photographic gelatin by GFC
HG/T 3010-1999 Methods for Determining the Scratch Resistance of Processed Photographic Film

Society of Motion Picture and Television Engineers (SMPTE), gel test strips

SMPTE ST 183M-1996 Motion-Picture Film - Photographic Audio Level Test Films - Measurement of Photoelectric Output Factor
SMPTE 183M-1996 Motion-Picture Film - Photographic Audio Level Test Films - Measurement of Photoelectric Output Factor
SMPTE 146M-2001 Motion-Picture Film - 16- and 8-mm Reversal Color Camera Films - Determination of Speed
SMPTE RP 32-1995 Specifications for 8-mm Type S Test Film for Projectors and Printers
SMPTE ST 146M-2001 Motion-Picture Film - 16- and 8-mm Reversal Color Camera Films - Determination of Speed
SMPTE RP 18-1995 Specifications for Test Film for Subjective Checking of 16-mm Motion-Picture Audio Projectors
SMPTE RP 110-1992 Specification for an Alignment Test Film for Anamorphic Attachments to 35-mm Motion-Picture Projectors
SMPTE RP 82-1995 Specifications for 16-mm Projector Alignment and Screen Image Quality Test Film
SMPTE RP 91-2014 Specifications for 70-mm Projector Alignment and Screen Image Quality Test Film
SMPTE RP 216-2002 Specifications for 3-Perforation Test and Alignment Film for 35-mm Motion Pictures

Indonesia Standards, gel test strips

SNI 01-3735-1995 Specification and test method of gelatin

Professional Standard - Aviation, gel test strips

HB 6689-1992 Film for silicone rubber test
HB 7136-1995 Fluorosilicone rubber test film
HB 5429-1989 High acrylonitrile butadiene rubber and fluororubber test film
HB 5428-1989 Vulcanized rubber sheets for low acrylonitrile (NBR-L) and neoprene (CR) tests

Korean Agency for Technology and Standards (KATS), gel test strips

KS M 6402-2018 Testing methods of wet gel strength for compounded latex
KS B 5628-1991(2016) Test Transparencies for Overhead Projectors
KS B ISO 9339-2:2004 Optics and optical instruments-Contact lenses-Determination of thickness-Part 2:Hydrogel contact lenses
KS B ISO 9339-2:2014 Optics and optical instruments — Contact lenses — Determination of thickness — Part 2: Hydrogel contact lenses
KS C 6564-2002 Test methods of hot-film flow sensors
KS B 5628-1991(2021) Test Transparencies for Overhead Projectors
KS M 6402-2008 Testing methods of wet gel strength for compounded latex
KS M 6402-1988 Testing methods of wet gel strength for compounded latex
KS M ISO 706:2009 Rubber latex－Determination of coagulum content(sieve residue)
KS M ISO 34-2:2009 Rubber, vulcanized or thermoplastic-Determination of tear strength-Part 2:Small(Delft) test pieces
KS M ISO 34-2:2014 Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small(Delft) test pieces
KS M ISO 3810:2004 Floor tiles of agglomerated cork-Test methods
KS B 5639-1999 Cinematography－Photographic sound test films, 35mm and 16mm－Specifications
KS X 5908-2009(2020) Resolution test chart for microfilming-description and use in photographic documentary reproduction
KS B 5639-2003 Cinematography－Photographic sound test films, 35mm and 16mm－Specifications
KS A 4724-2006 Film badge for in－door environmental monitoring
KS A 4724-2006(2016) Film badge for in－door environmental monitoring
KS A ISO 4834-2003(2018) Cinematography - Magnetic sound test films excluding striped release prints - Basic technical characteristics
KS B ISO 11699-2:2001 Non-destructive testing－Industrial radiographic films－Part 2：Control of film processing by means of reference values
KS B ISO 11699-2-2001(2016) Non-destructive testing－Industrial radiographic films－Part 2：Control of film processing by means of reference values
KS B ISO 11699-2:2022 Non-destructive testing — Industrial radiographic films —Part 2: Control of film processing by means of reference values
KS B ISO 11699-2-2001(2021) Non-destructive testing－Industrial radiographic films－Part 2：Control of film processing by means of reference values
KS M ISO 706-2009(2019) Rubber latex－Determination of coagulum content(sieve residue)
KS B ISO 11699-1:2001 Non-destructive testing-Industrial radiographic films-Part 1:Classification of film systems for industrial radiography
KS X ISO 8126:2007 Micrographics-Duplicating film, silver, diazo and vesicular-Visual density-Specifications and measurement
KS X ISO 8126:2013 Micrographics－Duplicating film, silver, diazo and vesicular－Visual density－Specifications and measurement
KS B ISO 11699-1:2016 Non-destructive testing－Industrial radiographic films－Part 1：Classification of film systems for industrial radiography
KS A ISO 7832:2018 Cinematography — Photoelectric output factor of photographic-type audio-level test films — Measurement and calibration
KS F 2400-2008(2018) Test methods for Pre-applied sheet membrane which is self-bonding with concrete substrate
KS P 4402-2007 Test lens set
KS F 2411-2010(2015) Standard test method for washing analysis of fresh concrete
KS A 4724-2006(2021) Film badge for in－door environmental monitoring
KS B ISO 11699-1-2016(2021) Non-destructive testing－Industrial radiographic films－Part 1：Classification of film systems for industrial radiography
KS M ISO 4661-2:2009 Rubber, vulcanized-Preparation of samples and test pieces-Part 2:Chemical tests
KS X 5908-2009 Resolution test chart for microfilming-description and use in photographic documentary reproduction
KS C IEC 61223-2-1:2005 Evaluation and routine testing in medical imaging departments－Part 2－1：Constancy tests－Film processors
KS B 6309-2020 Testing methods for condensate pumps
KS B 6309-1985 Testing methods for condensate pumps
KS B ISO 11699-1:2022 Non-destructive testing — Industrial radiographic film —Part 1: Classification of film systems for industrial radiography
KS B 6309-2005 Testing methods for condensate pumps
KS M ISO 11344-2017(2022) Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
KS A ISO 18903-2002(2017) Imaging materials－Films and paper－Determination of dimensional change
KS F 2594-2009 Method of test for slump flow of fresh concrete

Japanese Industrial Standards Committee (JISC), gel test strips

JIS K 7619:1988 Determination of the curl of photographic film
JIS Z 0237:2022 Testing methods of pressure-sensitive adhesive tapes and sheets
JIS Z 4918:2009 Illuminators for medical films
JIS Z 4335:1993 Film badge for in-door environmental monitoring
JIS G 0803:2021 Radiographic examination with film for the weld seam of welded steel tubes
JIS Z 4918:1995 Film illuminators for medical X-ray films

Group Standards of the People's Republic of China, gel test strips

T/CECS 10189-2022 Concrete Water Reducer Molecular Weight Test Gel Permeation Chromatography
T/CSTM 00193-2020 Aerogel thermal insulation sheets for Lithium-ion power battery
T/QGCML 346-2022 Test methods for airgel waterproofing membranes
T/CECS 1062-2022 Standard test method for bond performance between reinforcement sheets and concrete
T/CSTM 00204-2020 Test method for ultrasonic static gel strength of oil well cement slurry

Danish Standards Foundation, gel test strips

DS 423.40:2002 Testing of concrete - Hardened concrete - Production of fluorescence impregnated thin sections
DS/EN 666:1995 Resilient floor coverings - Determination of gelling
DS/EN ISO 11699-2:2012 Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values
DS/ISO 34:1980 Rubber, vulcanized. Determination of tear strength (trouser, angle and crescent test pieces)
DS 423.42:2002 Testing of concrete - Hardened concrete - Concrete composition
DS/EN 666:1994 Resilient floor coverings - Determination of gelling
DS/EN ISO 11699-1:2012 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography
DS/ISO 4661-1:1989 Rubber, vulcanized. Preparation of samples and test pieces. Part 1: Physical tests
DS/ISO 4661-2:1990 Rubber, vulcanized. Preparations of samples and test pieces. Part 2: Chemical tests
DS/EN 13880-12:2004 Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)
DS/EN 12350-10:2011 Testing fresh concrete - Part 10: Self-compacting concrete - L box test
DS/EN 12350-11:2011 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test
DS/EN 12350-12:2011 Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test
DS-håndbog 134.2.1:2013 Concrete testing - Part 2.1: Fresh concrete
DS-håndbog 134.2.2:2013 Concrete testing - Part 2.2: Hardened concrete

ES-AENOR, gel test strips

IN-BIS, gel test strips

BR-ABNT, gel test strips

ABNT P-MB-277-1964
ABNT NBR 15782-2020 Non-destructive testing - Industrial radiography - Film digitisation

Taiwan Provincial Standard of the People's Republic of China, gel test strips

CNS 11888-1987 Method of Test for Pressure Sensitive Adhesive Tapes and Sheets
CNS 12282-1988 Method of Test for Field Vane Shear Test in Cohesive Soil

PL-PKN, gel test strips

PN C04211-12-1989 Test methods of natural rubber latex Determination of coagulum content
PN N84456-1992 Photography. Slide projectors and filmstrip projectors. Illumination test
PN B10026-1970 Monolithic walls of mineral aggre- gate concrete . Principles of execution and testing
PN C99460-05-1986 Sampling ot photographic light scnsiiivc matcrials for testing (iuide sampling ot' films for art ot' printing (typography)
PN C99460-09-1986 Sampling of photographic light sensitive materials for testing Guide sampling of aerofilms
PN C89085-19-1987 Epoxy resins Methods of testing Determination of gel time after mixing with hardener
PN J04003-1964 Radiation protection. Measure- ment of ionizing radiation doses by means of personnel film badges
PN C04258-12-1991 Rubber test mixes Fluoroelastomers Test formu?a, preparation, vulcanisation and testing of properties

TR-TSE, gel test strips

TS 3152-1978 Rubber Latices - Determination Of Coagulum
TS 1861-1975 CINEMATOGRAPHY — MOTION — PICTURE SAFETY F?LM — DEFINITION, TESTING AND MARKING

American Society for Testing and Materials (ASTM), gel test strips

ASTM D8329-20 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
ASTM D8329-21 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
ASTM D3596-14 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
ASTM D3056-05(2010) Standard Test Method for Gel Time of Solventless Varnishes
ASTM D3056-14(2018) Standard Test Method for Gel Time of Solventless Varnishes
ASTM C505-19 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
ASTM D4217-91(1995)e1 Standard Test Method for Gel Time of Thermosetting Coating Powder
ASTM D4217-02 Standard Test Method for Gel Time of Thermosetting Coating Powder
ASTM D4217-07(2017) Standard Test Method for Gel Time of Thermosetting Coating Powder
ASTM D3183-10(2015) Standard Practice for Rubber&x2014;Preparation of Pieces for Test Purposes from Products
ASTM F1225-99 Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges
ASTM F1225-99(2003) Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges
ASTM D3616-95(2000) Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity
ASTM D3616-95(2019) Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity
ASTM E1815-96 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1815-96(2001) Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1815-18 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM C742-99 Standard Test Method for Degree of Set for Wood Sash Glazing Compound (Withdrawn 2002)
ASTM D3616-95(2014) Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity
ASTM D3616-95(2004)e1 Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity
ASTM D3616-95(2009) Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity
ASTM C443-19 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
ASTM C443-19a Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
ASTM C443-05a Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
ASTM C443-20 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
ASTM C505M-19 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
ASTM E1815-18(2023) Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM D3183-02 Standard Practice for Rubber8212;Preparation of Pieces for Test Purposes from Products
ASTM F907-85(1992)e1 Test Method for Measurement of Rotational Acceleration of a Wafer for Photoresist Spin Coating
ASTM F907-85E01R92 Test Method for Measurement of Rotational Acceleration of a Wafer for Photoresist Spin Coating
ASTM F3203-18 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing
ASTM F3203-16 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing
ASTM F3203-19 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing
ASTM F3203-19(2023) Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing
ASTM C1704/C1704M-09 Standard Test Method for Sampling and Testing Structural Cementitious Panels
ASTM C1704/C1704M-09a(2016) Standard Test Method for Sampling and Testing Structural Cementitious Panels
ASTM D3183-09 Standard Practice for Rubberx2014;Preparation of Pieces for Test Purposes from Products
ASTM D411-98 Standard Test Methods for Shellac Used for Electrical Insulation
ASTM D411-98(2003) Standard Test Methods for Shellac Used for Electrical Insulation
ASTM D3183-10 Standard Practice for Rubberx2014;Preparation of Pieces for Test Purposes from Products
ASTM F1520-94(2003) Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges
ASTM F1520-94(1999) Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges
ASTM F1520-94(2008) Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges
ASTM D3183-07 Standard Practice for Rubber8212;Preparation of Product Pieces for Test Purposes from Products
ASTM D3793-00 Standard Test Method for Low-Temperature Coalescence of Latex Paint Films
ASTM D411-08 Standard Test Methods for Shellac Used for Electrical Insulation
ASTM D7217-05 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7217-11 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D2765-01 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
ASTM D2765-95 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
ASTM D2765-16 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
ASTM D7997-21 Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations
ASTM D2765-11 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
ASTM F1225-99(2008) Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges
ASTM D3056-23 Standard Test Method for Gel Time of Solventless Varnishes
ASTM D2471-99 Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins
ASTM C1042-99 Standard Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear

RO-ASRO, gel test strips

STAS 4606-1980 NATURAL HEAVY WEIGHT AGGPEGATES FOR MORTARS AND CONCRETE W1TH MINERAL BINDING MATERIAL Testing methodo s
STAS 1811-1971 PLYWOOD Tcnsion test parallel Io plies
STAS 8798/11-1987 RUBBER LATEX Determination of coagulum content
SR EN 666-1996 Resilient floor coverings. Determination of gelling
STAS 1275-1988 Tests of concretes TESTS OF HARDENED CONCRETE Determination of mechanical strengthes
STAS 5585-1971 TESTS OF CONCRETE Dctermination of the modulus of compressibilily of concrete
STAS 5479-1988 Tesls of concrctcs TKSTS OF FHESH CONCHKTF Dcti'rmination of air content
STAS 1759-1988 Tests of concretes TESTS OF FRESH CONCRETE Determination of apparent density, consistance fine aggregates content and setting time
STAS 11557-1982 RUBBER Test recipe for testing rubber acrylonil rile-butadiene
STAS 2833-1980 Tests of concretes. DETERMINAT ION OF AXIAL SHRINKAGE OF HARDENED CONCRETE
STAS 5511-1989 Tests on concretes ADHESION DETERMINAT ION BETWEEN CONCRETE AND RE INFORCEMENT Method by pulling oul

Standard Association of Australia （SAA）, gel test strips

AS/NZS 4589:1999 Micrographics - Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm - Operating procedures
AS 1012.9:1999 Methods of testing concrete - Determination of the compressive strength of concrete specimens
AS 1012.6:1999 Methods of testing concrete - Method for the determination of bleeding of concrete

AT-ON, gel test strips

ONORM A 2106-1989 Projectors for 16 mm filmfor educational purposes;lest specifications

ET-QSAE, gel test strips

ES 537-2000

ZA-SANS, gel test strips

SANS 10141:2007 The processing, testing and storage of silver-gelatin microfilm for archival purposes
SANS 10034-2:2009 Rubber, vulcanized or thermoplastic - Determination of tear strength Part 2: Small (Delft) test pieces
SANS 11699-2:2005 Non-destructive testing - Industrial radiographic films Part 2: Control of film processing by means of reference values
SANS 11699-1:2005 Non-destructive testing - Industrial radiographic films Part 1: Classification of film systems for industrial radiography
SANS 4661-2:2003 Rubber, vulcanized - Preparation of samples and test pieces Part 2: Chemical tests
SANS 6251:2006 Concrete tests - Density of hardened concrete

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, gel test strips

GB/T 34794-2017 Guidelines for DNA gel purification kit
GB/T 33315-2016 Plastics—Phenolic resins—Determinaiton of the gel time

RU-GOST R, gel test strips

GOST 24923-1981 Latexes. Determination of coagulum content
GOST R 57779-2017 Plastics. Phenolic resins. Determination of gel time on a test plate
GOST 28643-1990 Rubber latex. Determination of coagulum content (sieve residue)
GOST 23016-1978 Rubber. Method for the determination of the tear resistance on test strips
GOST 25183.8-1982 Photographic gelatine. Method of determination of jelly hardness
GOST 11477-1965 Motion picture film. Determination of strinkage
GOST 10691.3-1984 Black-and-white motion picture films. Method for determination of speed numbers
GOST 22181-1991 Unsaturated polyester resins. Methods for determination of gel time
GOST R IEC 61223-2-1-2001 Evaluation and routine testing in medical imaging departments. Part 2-1. Constancy tests. Film processors
GOST R 50359-1992 Rubber, vulcanized. Determination of tear strength (throuser, angle and crescent test pieces)

Professional Standard - Petrochemical Industry, gel test strips

SH/T 1050-1991 Determination of gel content of synthetic raw rubber
SH/T 1050-2014 Determination of gel content of raw synthetic rubber
SH/T 1153-2011 Synthetic rubber latex.Determination of coagulum content(sieve residue)
SH/T 1153-1992(1998年确认) Synthetic rubber latex—Determination of congulum content(sieve residue)
SH/T 1153-1992 Synthetic rubber latex.Determination of congulum content (sieve residue)

Military Standard of the People's Republic of China-General Armament Department, gel test strips

GJB 1059.4-1990 Phenolic Resin Test Method for Ablative Materials Gel Time Test
GJB 1059.4A-2020 Test Methods for Phenolic Resins for Ablative Materials Part 4: Gel Time Test
GJB 647-1988 Method for determination of aerial photography film deformation rate

American National Standards Institute （ANSI), gel test strips

ANSI IT9.4-1988 Imaging Media (Film) - Lubrication on Films - Method for Determining
ANSI PH2.40-1985 Photography (Film) - Root Mean Square (rms) Granularity of Film (Images on One Side Only) - Method for Measuring
ANSI IT9.7-1989 Imaging Media - Determination of Brittleness of Photographic Film - Wedge Brittleness Test
ANSI/ASTM D3056:2005 Test Method for Gel Time of Solventless Varnishes
ANSI/ASTM D2471:1999 Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02)
ANSI IT9.8-1989 Imaging Media - Photographic Film - Determination of Folding Endurance
ANSI/ASTM D3596:2001 Practice for Determination of Gels (Fisheyes) in General-Purpose Poly(Vinyl Chloride) (PVC) Resins
ANSI/NAPM IT9.4-1992 Photography - Processed Films - Method for Determining Lubrication
ANSI/ISO 8776:1988 Imaging Media - Photographic Film - Determination of Folding Endurance

Institute of Electrical and Electronics Engineers (IEEE), gel test strips

SMPTE ST 183:1996 ST 183:1996 - SMPTE Standard - For Motion-Picture Film — Photographic Audio Level Test Films – Measurement of Photoelectric Output Factor
EG 13:2012 EG 13:2012 - SMPTE Engineering Guideline - Use of Audio Magnetic Test Films
SMPTE RP 20:2003 RP 20:2003 - SMPTE Recommended Practice - Specifications for 16-mm Registration Test Film
RP 20:2003 RP 20:2003 - SMPTE Recommended Practice - Specifications for 16-mm Registration Test Film
SMPTE RP 45:1972 RP 45:1972 - SMPTE Recommended Practice - Use and Care of Sound Test Films
SMPTE RP 19:2003 RP 19:2003 - SMPTE Recommended Practice - Specifications for 8-mm Type R Registration Test Film
RP 19:2003 RP 19:2003 - SMPTE Recommended Practice - Specifications for 8-mm Type R Registration Test Film
ST 146:2001 ST 146:2001 - SMPTE Standard - For Motion-Picture Film — 16- and 8-mm Reversal Color Camera Films — Determination of Speed

工业和信息化部, gel test strips

HG/T 3558-2019 Method for determination of moisture content of films and film bases

International Organization for Standardization (ISO), gel test strips

ISO 706:1975 Title missing - Legacy paper document
ISO 706:1976 Rubber latices — Determination of coagulum content
ISO 8507:1986 Agglomerated cork discs; Methods of test
ISO 10339:1997 Ophthalmic optics - Contact lenses - Determination of water content of hydrogel lenses
ISO 706:2004 Rubber latex - Determination of coagulum content (sieve residue)
ISO 706:1985 Rubber latex; Determination of coagulum content (sieve residue)
ISO 6077:1980 Photography — Determination of brittleness of photographic film — Wedge brittleness test
ISO 17278:2013 Rubber, raw natural.Determination of the gel content of technically specified rubber (TSR)
ISO 34-2:2007 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces
ISO 17278:2020 Rubber, raw natural — Determination of the gel content of technically specified rubber (TSR)
ISO 4330:1979 Photography — Determination of the curl of photographic film
ISO 34:1979 Rubber, vulcanized; Determination of tear strength (trouser, angle and crescent test pieces)
ISO 15040:1999 Composites - Prepregs - Determination of gel time
ISO 34-2:1996 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces
ISO 4661-2:1987 Rubber, vulcanized; Preparation of samples and test pieces; Part 2 : Chemical tests
ISO 4661-2:2018 Rubber, vulcanized - Preparation of samples and test pieces - Part 2: Chemical tests
ISO 6221:1991 Photography — Films and papers — Determination of dimensional change
ISO 18908:2000 Imaging materials - Photographic film - Determination of folding endurance

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, gel test strips

GB/T 15457-1995 Method for determining lubrication of photographic film and film base
GB/T 9858-1988 Method for determining the folding endurance of photographic film and film base
GB/T 9858-2009 Method for determining the folding endurance of photographic film and film base
GB/T 12683-1990 Method for determining the tensile properties of photographic film and film base
GB/T 12683-2009 Method for determining the tensile properties of photographic film and film base
GB/T 32788.1-2016 Test method for properties of prepreg.Part 1:Determination of gel time
GB/T 1755-1979 Methods of test for dilution ratio of thinners and anti-blushing agents
GB/T 12007.7-1989 Determination of gelation time of epoxide resins
GB 12007.7-1989 Determination of gel time of epoxy resin
GB/T 8291-2023 Determination of latex clot content (sieve residue)
GB/T 8291-1987 Natural rubber latex concentrate--Determination of coagulum content
GB/T 28601-2012 Rubber compounding ingredients.Silica,precipitated,hydrated.Determination of gelatin content
GB/T 6847-1995 Determination of the curl of photographic film and paper
GB/T 19348.2-2003 Non-destructive testing-Industrial radiographic films-Part 2:Control of film processing by means of reference values
GB/T 19348.1-2003 Non-destructive testing-Industrial radiographic films-Part 1:Classification of film systems for industrial radiography
GB/T 19348.1-2014 Non-destructive testing.Industrial radiographic film.Part 1:Classification of film systems for industrial radiography
GB/T 6849-1995 Photographic films and papers--Wedge test for brittleness
GB/T 30913-2014 Standard test method for classification of film systems for industrial radiography
GB/T 7193.6-1987 Unsaturated polyester resin--Determination of gel time at 25 Centigrade
GB/T 8291-2008 Natural rubber latex concentrate.Determination of coagulum content(sieve residue)
GB 9863-1988 Method for Determination of Sensitivity of Color Reversal Photographic Film
GB/T 9863-1988 Method for determining the speed of colour reversal camera films

Association Francaise de Normalisation, gel test strips

NF EN 666:1995 Revêtements de sol résilients - Détermination de la gélification
NF B57-058*NF ISO 8507:2002 Agglomerated cork discs -Test methods
NF T42-010*NF ISO 706:2005 Rubber latex - Determination of coagulum content (sieve residue)
NF T42-010:1997 Rubber latex. Determination of coagulum content (sieve residue).
NF A04-190-1*NF EN 12681-1:2017 Founding - Radiographic testing - Part 1 : Film techniques
NF ISO 706:2005 Latex de caoutchouc - Détermination de la teneur en coagulum (refus sur tamis)
NF B57-081:1977 Cork-agglomerated slabs for floorings.tests.
XP P18-468:2022 Béton - Essai pour béton frais - Ressuage
NF P62-119*NF EN 666:1995 Resilient floor coverings. Determination of gelling.
NF T46-033-2:2011 Rubber, vulcanized or thermoplastic - Determination of tear strenght - Part 2 : small (Delft) test pieces.
NF T46-033-2*NF ISO 34-2:2015 Rubber, vulcanized or thermoplastic - Determination of tear strenght - Part 2 : small (Delft) test pieces
NF B57-056:1977 Cork.compound agglomerated corf for insulation underlays for parquets intended to be glued.tests.
NF B57-040:1974 Expanded pure agglomerated cork. Determination of bulk density.
NF T57-617*NF ISO 15040:2001 Composites - Prepregs - Determination of gel time
NF B57-043:1974 Expanded pure agglomerated cork. Determination of moisture content.
NF EN 12970:2000 Composites - Préimprégnés - Détermination du temps de gélification
NF ISO 15040:2001 Composites - Préimprégnés - Détermination du temps de gélification
NF EN 14474:2005 Produits préfabriqués en béton - Béton utilisant des copeaux de bois comme granulat - Exigences et méthodes d'essai
XP P18-468-2016 Concrete - Testing fresh concrete - Bleeding
XP P18-543-2017 Concrete - Testing fresh concrete - Bleeding
NF EN ISO 11699-1:2012 Essais non destructifs - Film pour radiographie industrielle - Partie 1 : classification des systèmes de films pour radiographie industrielle
NF T57-616*NF ISO 15034:2001 Composites - Prepregs - Determination of resin flow
NF A09-217-1*NF EN ISO 11699-1:2012 Non-destructive testing - Industrial radiographic film - Part 1 : classification of film for industrial radiography.
NF EN ISO 11699-2:2018 Essais non destructifs - Films utilisés en radiographie industrielle - Partie 2 : contrôle du traitement des films au moyen de valeurs de référence
NF ISO 4708:2002 Aggloméré composé de liège - Joints pour industries mécaniques - Méthodes d'essai
NF B57-041:1974 Expanded pure agglomerated cork. Determination of the modulus of rupture by bending.
NF P18-431-11*NF EN 12350-11:2010 Testing fresh concrete - Part 11 : self-compacting concrete - Sieve segregation test
NF T77-104:1986 Basic silicones for industrial use. Pastes, greases and non fluid gels. Determination of cone penetration. Consistometry.
XP P18-463:2011 Concrete - Testing gas permeability on hardened concrete

British Standards Institution (BSI), gel test strips

BS EN ISO 11699-2:2018 Tracked Changes. Non-destructive testing. Industrial radiographic films. Control of film processing by means of reference values
BS ISO 15040:1999 Composites - Prepregs - Determination of gel time
BS ISO 706:2004 Rubber latex - Determination of coagulum content (sieve residue)
BS 5350-B5:1976 Methods of test for adhesives - Determination of gelation time
BS ISO 17278:2013 Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
BS EN 584-2:1997 Non-destructive testing. Industrial radiographic film. Control of film processing by means of reference values
BS ISO 17278:2020 Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
BS 2782-8 Method 835C:1980 Methods of testing plastics - Other properties - Determination of gelation time of polyester and epoxide resins using a gel timer
19/30388674 DC BS ISO 17278. Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
BS EN 1348:1999 Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
BS EN 584-1:2006 Non-destructive testing - Industrial radiographic film - Classification of film systems for industrial radiography
BS 3900-J3:1998 Methods of test for paints - Testing of coating powders - Determination of gel time of coating powders
BS 903-A3.2:1997 Physical testing of rubber - Determination of tear strength - Small (Delft) test pieces
BS 7725-2.1:1994 Evaluation and routine testing in medical imaging departments. Constancy tests. Method for film processors
BS 5550-2.12.1:1993 Cinematography - 16 mm film - Miscellaneous - Specification for test film for assessing the picture performance of 16 mm motion-picture projectors
BS EN ISO 11699-2:2011 Non-destructive testing. Industrial radiographic films. Control of film processing by means of reference values
BS ISO 1920-6:2019 Testing of concrete - Sampling, preparing and testing of concrete cores
BS 2782-8 Method 835A:1980 Methods of testing plastics - Other properties - Determination of gelation time of phenolic resins
BS 3890:1965 General recommendations for the testing, calibration and processing of radiation monitoring films
BS ISO 6025:2000 Cinematography. Analogue photographic sound test films, 35 mm and 16mm. Specifications
BS EN 12636:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete
BS EN 14693:2017 Tracked Changes. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the behaviour of bitumen sheets during application of mastic asphalt
BS EN ISO 14096-1:2020 Non-destructive testing. Qualification of radiographic film digitisation systems - Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
BS ISO 1920-4:2020 Testing of concrete - Strength of hardened concrete
BS 1881-131:1998 Testing concrete. Methods for testing cement in a reference concrete
BS ISO 4661-2:2018 Rubber, vulcanized. Preparation of samples and test pieces. Chemical tests
BS EN 14437:2004 Determination of the uplift resistance of clay or concrete tiles for roofing - Roof system test method
BS EN 989:1996 Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the 'push-out' test
BS ISO 18908:2000 Imaging materials - Photographic film - Determination of folding endurance
BS ISO 18910:2000 Imaging materials - Photographic film and paper - Determination of curl
BS EN 14488-6:2006 Testing sprayed concrete - Thickness of concrete on a substrate
BS ISO 11344:2004 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography

European Committee for Standardization (CEN), gel test strips

EN ISO 10339:1999 Ophthalmic Optics - Contact Lenses - Determination of Water Content of Hydrogel Lenses ISO 10339: 1997
EN 666:1994 Resilient floor coverings - Determination of gelling
EN 1348:2007 Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
EN 1323:2007 Adhesives for tiles - Concrete slabs for tests
EN ISO 11699-1:2011 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
EN 989:1995 Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the "push-out" test
prEN 989-1992 Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "push-out" test
EN 12636:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete
EN 584-1:1994 Non Destructive Testing - Industrial Radiographic Film - Part 1: Classification of Film Systems for Industrial Radiography
prEN 12681-1 rev Founding - Radiographic testing - Part 1: Film techniques
EN 584-2:1996 Non-Destructive Testing - Industrial Radiograhic Film - Part 2: Control of Film Processing by Means of Reference Values

ES-UNE, gel test strips

UNE-EN 12681-1:2018 Founding - Radiographic testing - Part 1: Film techniques
UNE-EN ISO 11699-2:2019 Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:2018)
UNE-EN 3863:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of flatness (Endorsed by AENOR in March of 2013.)

German Institute for Standardization, gel test strips

DIN EN 12681-1:2018-02 Founding - Radiographic testing - Part 1: Film techniques; German version EN 12681-1:2017
DIN 15566:1981 Film 35 mm; optical sound head for film 35 mm; requirements and general data for measuring
DIN 53548:1983 Testing of rubber; determination of the freezing behaviour of vulcanized rubbers by moduls-temperature measurement (Gehman test)
DIN ISO 706:2006 Rubber latex - Determination of coagulum content (sieve residue) (ISO 706:2004);English version of DIN ISO 706:2006-03
DIN EN 666:1995 Resilient floor coverings - Determination of gelling; German version EN 666:1994
DIN EN 666:1995-01 Resilient floor coverings - Determination of gelling; German version EN 666:1994
DIN 15566:1981-05 Film 35 mm; optical sound head for film 35 mm; requirements and general data for measuring
DIN 19051-20:1991-03 Test patterns for micrography; test exposures made to establish the conditions for microfilming of drawings
DIN 15578-1:1978 Length-measuring of perforated motion-picture films and magnetic tapers; values of conversion for motion-picture films
DIN EN ISO 11699-2:2018-12 Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:2018); German version EN ISO 11699-2:2018
DIN EN 989:1995 Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the "Push Out" test; German version EN 989:1995
DIN EN ISO 11699-1:2012-01 Non-destructive testing - Industrial radiographic films - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008); German version EN ISO 11699-1:2011
DIN EN 14474:2005-03 Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods; German version EN 14474:2004
DIN ISO 18910:2005 Imaging materials - Photographic film and paper - Determination of curl (ISO 18910:2000);English version of DIN ISO 18910:2005
DIN EN 12681-1:2018 Founding - Radiographic testing - Part 1: Film techniques
DIN 16726:2017-08 Plastic sheets - Testing
DIN EN 12350-10:2010-12 Testing fresh concrete - Part 10: Self-compacting concrete - L box test; German version EN 12350-10:2010
DIN EN 12350-12:2010-12 Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test; German version EN 12350-12:2010
DIN 15578-2:1978-07 Length-measuring of perforated motion-picture films and magnetic tapes; tabels of running times 1 to 60 s in relation to film length
DIN 19061:1996 Digital output on film 35 mm in aperture cards - Requirements and testing
DIN EN 12350-9:2010-12 Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test; German version EN 12350-9:2010

国家市场监督管理总局、中国国家标准化管理委员会, gel test strips

GB/T 37498-2019 Rubber,raw natural—Determination of the gel content of technically specified rubber (TSR)
GB/T 39421-2020 Methods for determining the static gel strength of cement formulations

Professional Standard - Building Materials, gel test strips

JC/T 774-2004 Test method for gel time of prepreg

VN-TCVN, gel test strips

TCVN 6317-2007 Rubber latex.Determination of coagulum content (sieve residue)
TCVN 7077-2002 Radiation protection.Personal photographic dosemeter

AENOR, gel test strips

UNE-ISO 706:2012 Rubber latex. Determination of coagulum content (sieve residue)
UNE-EN 666:1995 RESILIENT FLOOR COVERINGS. DETERMINATION OF GELLING.
UNE-EN 13880-12:2004 Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)
UNE-EN 12350-10:2011 Testing fresh concrete - Part 10: Self-compacting concrete - L box test
UNE-EN ISO 11699-2:2012 Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:1998)
UNE-EN 12350-11:2010 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test
UNE-EN 12350-12:2011 Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test

IT-UNI, gel test strips

BE-NBN, gel test strips

NBN-ISO 3810:1992 Floor tiles of agglomerated cork. Methods of test
NBN 748-03-1968
NBN 814-07-1970

PT-IPQ, gel test strips

ANSI - American National Standards Institute, gel test strips

IT9.7-1989 Imaging Media - Determination of Brittleness of Photographic Film - Wedge Brittleness Test (IS&T)
IT9.10-1991 DETERMINATION OF THE CURL OF PHOTOGRAPHIC FILM (IS&T)

Underwriters Laboratories (UL), gel test strips

UL 214-1997 Tests for flame-propagation of fabrics and films

CEN - European Committee for Standardization, gel test strips

EN 1348:1997 Adhesives for Tiles - Determination of Tensile Adhesion Strength for Cementitious Adhesives (Incorporates Amendment A1: 1998)
EN 1323:1996 Adhesives for Tiles - Concrete Slab for Test (Incorporates Amendment A1: 1998)
EN 584-1:2006 Non Destructive Testing - Industrial Radiographic Film - Part 1: Classification of Film Systems for Industrial Radiography
EN 12681-1:2017 Founding - Radiographic testing - Part 1: Film techniques

NO-SN, gel test strips

NS 3681-1986 Concrete testing - Hardened concrete - Core bending test
NS 3674-1987 Concrete testing - Hardened concrete - Tensile strength

SG-SPRING SG, gel test strips

SS 78 Pt.A17-1987 Testing Concrete Part A17 : Method For Determination Of Tensile Splitting Strength

KR-KS, gel test strips

KS B ISO 11699-2-2022 Non-destructive testing — Industrial radiographic films —Part 2: Control of film processing by means of reference values
KS A ISO 7832-2018 Cinematography — Photoelectric output factor of photographic-type audio-level test films — Measurement and calibration
KS B ISO 11699-1-2016 Non-destructive testing－Industrial radiographic films－Part 1：Classification of film systems for industrial radiography
KS B ISO 11699-1-2022 Non-destructive testing — Industrial radiographic film —Part 1: Classification of film systems for industrial radiography
KS A ISO 7832-2018(2023) Cinematography — Photoelectric output factor of photographic-type audio-level test films — Measurement and calibration

Professional Standard - Traffic, gel test strips

JT/T 758-2009 Apparatus of abrasion resistance for cement motar and concrete

National Metrological Verification Regulations of the People's Republic of China, gel test strips

JJG(交通) 097-2009 Apparatus of Abrasion Resistance for Cement Mortar and Concrete

Lithuanian Standards Office , gel test strips

LST EN 666-2002 Resilient floor coverings - Determination of gelling
LST EN 13880-12-2004 Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)
LST EN 12350-10-2010 Testing fresh concrete - Part 10: Self-compacting concrete - L box test
LST EN ISO 11699-2:2012 Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:1998)
LST EN 12350-12-2010 Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test
LST EN 12350-11-2010 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test

Hubei Provincial Standard of the People's Republic of China, gel test strips

DB42/T 795-2012 Latex agglutination detection method of avian influenza virus
DB42/T 792-2012 Detection method of latex agglutination antibody against porcine Japanese encephalitis

Professional Standard - Agriculture, gel test strips

GB 8291-1987 Determination of clot content of natural concentrated latex
NY/T 547-2002 Agar gel immunodiffusion for rabbit myxoma

HU-MSZT, gel test strips

MSZ KGST 803-1977

国家食品药品监督管理局, gel test strips

YY/T 1548-2017 Film dose measurement method for radiotherapy

Malaysia Standards, gel test strips

MS 281 Pt.6-1998

Guangdong Provincial Standard of the People's Republic of China, gel test strips

DB44/T 1274-2013 Determination of Gel Strength of Frozen Surimi by Texture Analyzer

Professional Standard - Pharmaceutical Packaging, gel test strips

YBB 0032-2004 Test method for penetration force of closures
YBB 0033-2004 Test method for fragmentation of closures

Association for Information and Image Management (AIIM), gel test strips

AIIM 7565-1993 Micrographics - Readers for transparent microforms - Measurement of characteristics

国家发展和改革委员会, gel test strips

HG/T 3801-2006 Detection method of rubber twin-screw extrusion tablet press

CL-INN, gel test strips

GM Europe, gel test strips

GME L-8C-4-2007 Condensate Expulsion Test

European Association of Aerospace Industries, gel test strips

AECMA PREN 6043-1995 Aerospace Series Thermosetting Resin Systems Test Method Determination of Gel Time and Viscosity Edition P1

IPC - Association Connecting Electronics Industries, gel test strips

IPC TM-650 2.4.1E-2004 Adhesion@ Tape Testing
IPC TM-650 2.4.1D-1997 Adhesion@ Tape Testing