ZH
RU
ES

water p

water p, Total:246 items.

In the international standard classification, water p involves: Air quality, Paint ingredients, Water quality, Kitchen equipment, Insulating materials, Aircraft and space vehicles in general, Internal combustion engines, Rails and railway components, Materials for aerospace construction, Analytical chemistry, Pesticides and other agrochemicals, Protective equipment, Terminology (principles and coordination), Information technology (IT) in general, Electrical and electronic testing, Rotating machinery, Telecommunication systems, Protection of and in buildings, Lamps and related equipment, Medical equipment, Construction materials, Clothes, Internal combustion engines for road vehicles, Electrical accessories, Items of art and handicrafts, Ground service and maintenance equipment, Semiconductor devices, Electrical engineering in general, Installations in buildings, Equipment for the chemical industry, Electrical equipment for working in special conditions, General methods of tests and analysis for food products, Aerospace fluid systems and components, Machine tools, Pipeline components and pipelines, Powder metallurgy, Television and radio broadcasting, Construction industry, Structures of buildings, Non-ferrous metals, Measurement of volume, mass, density, viscosity, Geology. Meteorology. Hydrology.

AENOR, water p

UNE 104306:2000 Synthetic materials. Determination of plasticizing content for PVC-P sheets used in waterproofing.
UNE 104423:1995 SYNTHETIC MATERIALS. APPLICATION. LINING SYSTEMS FOR WATER RESERVOIRS USED FOR IRRIGATION PURPOSES OR WATER STORAGE WITH WATERPROOFING GEOMEMBRANES MADE OUT OF POLYVINYL CHLORIDE (PVC-P) NOT RESISTANT TO BITUMEN.

RU-GOST R, water p

GOST 32596-2013 p,p'-Benzidine. Determination in water
GOST 7827-1974 Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications
GOST 16277-1993 Plates of separate fastening for railway P50, P65 and P75 rails. Specifications
GOST 27370-1987 Brush-holders for slip-rings group R type RA

US-FCR, water p

FCR FED H-08-4 VOL 3 SEC I 389-1988 DETAIL (P-104) WATER CLOSET
FCR FED H-08-4 VOL 3 SEC I 387-1988 DETAIL (P-111) WATER CLOSET
FCR COE ER 1-2-2-1991 WATER RESOURCES POLICIES AND AUTHORITIES SUBSTATIVE CONGRESSIONAL CONTACTS (RCS: CECW-P-21)

ESDU - Engineering Sciences Data Unit, water p

ESDU 83006 A-1985 Contribution of fin to sideforce@ yawing moment and rolling moment derivatives due to rate of roll@ (Y sub p) sub F@ (N sub p) sub F@ (L sub p) sub F@ in the presence of body@ wing and tailplane.

German Institute for Standardization, water p

DIN 38413-4:1986 German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of carbon disulfide (P 4)
DIN 38413-1:1982-03 German standard methods for the analysis of water, waste water and sludge; Individual components (Group P); Determination of hydrazine (P 1)
DIN 38413-2:1988 German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of vinyl chloride by headspace gas chromatography (P 2)
DIN 38413-5:1990 German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) by polarography (P 5)
DIN EN 60641-3-2 Bb.1:2010 Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 - Supplement 1: Comparison of the types
DIN EN 60641-3-2:2008 Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 (IEC 60641-3-2:2007); German version EN 60641-3-2:2008
DIN 38413-6:2007-02 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 6: Determination of acrylamide - Methode using high performance liquid chromatography with mass spectrometric detection (HPLC-MS/MS) (P 6)
DIN 38413-1:1982 German standard methods for the analysis of water, waste water and sludge; Individual components (Group P); Determination of hydrazine (P 1)
DIN 16937:1986 Plasticized polyvinyl chloride (PVC-P) waterproofing sheet compatible with bitumen; requirements
DIN 38413-6:2007 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 6: Determination of acrylamide - Methode using high performance liquid chromatography with mass spectrometric detection (HPLC-MS/MS) (P 6)
DIN 16938:1986 Plasticized polyvinyl chloride (PVC-P) waterproofing sheet incompatible with bitumen; requirements
DIN 1417-4:1970-08 Broaching tools; rectangular end pieces P (not for internal splines)
DIN EN 15803:2010-04 Conservation of cultural property - Test methods - Determination of water vapour permeability (<delta><(Index)p>); German version EN 15803:2009
DIN 1417-4:1970 Broaching tools; rectangular end pieces P (not for internal splines)
DIN 38413-8:2000 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 8: Determination of nitrilotriacetic acid (NTA), ethylenedinitrilotetraacetic acid (EDTA) and diethylenetrinitrilopentaacetic acid (DTPA) by
DIN EN 15803:2010 Conservation of cultural property - Test methods - Determination of water vapour permeability (<(Index)p>); German version EN 15803:2009

Defense Logistics Agency, water p

DLA A-A-59560-2000 POST, BINDING, ELECTRICAL (INSULATED) [Superseded: DLA MIL-P-55149/1 D CANC NOTICE 1, DLA MIL-P-55149/1 D, DLA MIL-P-55149/1 C, DLA MIL-P-55149/1 B (1), DLA MIL-P-55149/1 B, DLA MIL-P-55149/1 A, DLA MIL-P-55149/1]
DLA A-A-59206 VALID NOTICE 1-2003 PROBE LIGHT KIT, INSPECTION [Superseded: DLA MIL-P-12001 D CANC NOTICE 1, DLA MIL-P-12001 D, DLA MIL-P-12001 C, DLA MIL-P-12001 B]
DLA A-A-59206-1998 PROBE LIGHT KIT, INSPECTION [Superseded: DLA MIL-P-12001 D CANC NOTICE 1, DLA MIL-P-12001 D, DLA MIL-P-12001 C, DLA MIL-P-12001 B]
DLA L-P-516 A REINST NOTICE 3-2001 PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST [Use In Lieu Of: DLA L-P-00516]

European Committee for Standardization (CEN), water p

EN 60641-3-2:2008 Pressboard and presspaper for electrical purposes — Part 3: Specifications for individual materials — Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1

CENELEC - European Committee for Electrotechnical Standardization, water p

EN 60641-3-2:1994 Specification for Pressboard and Presspaper for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Requirements for Presspaper@ Types P.2.1@ P.4.1@ P.4.2@ P.4.3@ P.6.1 and P.7.1

British Standards Institution (BSI), water p

BS EN 60641-3-2:2008 Pressboard and presspaper for electrical purposes - Specifications for individual materials - Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, and P.6.1
BIP 2082-2008 Electrician's Guide to the Building Regulations Part P - 2nd Edition
BS PD ISO/TS 21569-4:2016 Horizontal methods for molecular biomarker analysis. Methods of analysis for the detection of genetically modified organisms and derived products. Real-time PCR based screening methods for the detection of the P-nos and P-nos-np
BS EN 60079-2:2008 Explosive atmospheres. Equipment protection by pressurized enclosure "p"
BS EN 60079-2:2004 Electrical apparatus for explosive gas atmospheres - Pressurized enclosures "p"
BS M 61:1989 Specification for envelope dimensions of "P" clamps (loop clamps) for fluid systems

United States Navy, water p

NAVY A-A-50555-1996 PUMPING UNITS, SEWAGE, DUPLEX, CENTIRFUGAL, AUTOMATIC WET-PIT TYPE [Superseded: NAVY MIL-P-21251 E CANC NOTICE 1, NAVY MIL-P-21251 E, NAVY MIL-P-21251 D, NAVY MIL-P-21251 C (1), NAVY MIL-P-21251 C, NAVY MIL-P-21251 B, NAVY MIL-P-21251 A]
NAVY A-A-50570-1997 PAINT, WATER-BORNE, ACRYLIC OR MODIFIED ACRYLIC, SEMIGLOSS, FOR METAL SURFACES [Superseded: NAVY MIL-P-28578 B CANC NOTICE 1, NAVY MIL-P-28578 B, NAVY MIL-P-28578 A, NAVY MIL-P-28578]
NAVY WW-P-541 E (1)-1990 PLUMBING FIXTURES (GENERAL SPECIFICATION) [Use In Lieu Of: NAVY WW-P-00541 C]
NAVY A-A-59253-1998 PAILS, UTILITY, PLASTIC [Superseded: NAVY L-P-65 C CANC NOTICE 1, NAVY L-P-65 C, NAVY L-P-65 B INT AMD 2, NAVY L-P-65 B, NAVY L-P-0065 A (1), NAVY L-P-0065 A]
NAVY A-A-50562-1997 PUMP UNITS, CENTRIFUGAL, WATER, HORIZONTAL; GENERAL SERVICE AND BOILER-FEED: ELECTRIC-MOTOR- OR STEAM-TURBINE-DRIVEN [Superseded: NAVY MIL-P-17552 F CANC NOTICE 1, NAVY MIL-P-17552 F, NAVY MIL-P-17552 E, NAVY MIL-P-17552 D (1), NAVY MIL-P-17552 D,
NAVY A-A-50572-1997 PUMP UNIT, CENTRIFUGAL: PORTABLE, SELF-PRIMING, ENGINE-DRIVEN (DEWATERING; CONTRACTOR AND TRASH TYPE) [Superseded: NAVY MIL-P-17861 F CANC NOTICE 1, NAVY MIL-P-17861 F, NAVY MIL-P-17861 E, NAVY MIL-P-17861 D, NAVY MIL-P-17861 C, NAVY MIL-P-17861 B
NAVY MIL-C-20218 F VALID NOTICE 1-1991 CHROMIUM PLATING, ELECTRODEPOSITED, POROUS [Use In Lieu Of: NAVY MIL-P-0020218 B]
NAVY MIL-P-15280 J NOTICE 1-1998 PLASTIC MATERIAL, UNICELLULAR (SHEETS AND TUBES) [Use In Lieu Of: NAVY MIL-P-0015280 F]
NAVY A-A-59315/2-1998 POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS ALUMINUM-BRONZE, TYPE I, CLASS 2 [Superseded: NAVY MIL-P-85856/2 NOTICE 2, NAVY MIL-P-85856/2, NAVY MIL-P-85856/2 VALID NOTICE 1]
NAVY A-A-59315/3-1998 POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS ALUMINUM-BRONZE, TYPE I, CLASS 1 [Superseded: NAVY MIL-P-85856/3 NOTICE 2, NAVY MIL-P-85856/3, NAVY MIL-P-85856/3 VALID NOTICE 1]
NAVY A-A-59315/28-1998 POWDER MATERIAL FOR FLAME AND PLASMA SPRAYED COATINGS CARBON STEEL-MOLYBDENUM-ALUMINUM, TYPE I, CLASS 2 [Superseded: NAVY MIL-P-85856/28 NOTICE 2, NAVY MIL-P-85856/28, NAVY MIL-P-85856/28 VALID NOTICE 1]
NAVY A-A-59315/29-1998 POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS IRON-MOLYBDENUM-ALUMINUM, TYPE I, CLASS 2 [Superseded: NAVY MIL-P-85856/29 NOTICE 2, NAVY MIL-P-85856/29, NAVY MIL-P-85856/29 VALID NOTICE 1]
NAVY MIL-L-81561/6-1994 LIFE PRESERVER, INFLATABLE, YOKE, HEAT SEALED, TYPE LPU-32/P
NAVY MIL-L-81561/6 NOTICE 2-2008 LIFE PRESERVER, INFLATABLE, YOKE, HEAT SEALED, TYPE LPU-32/P
NAVY MIL-P-19380 J NOTICE 1-1995 PONTOONS, STEEL, SECTIONAL, P-SERIES: INCLUDING FITTINGS AND TOOLS (FOR COUPLING INTO FLOATING STRUCTURES), GENERAL SPECIFICATION FOR [Use In Lieu Of: NAVY MIL-P-0019380 G]
NAVY MIL-PRF-2863 C-2000 PACKING, PREFORMED, CONDENSER TUBE, NON-ASBESTOS [Use In Lieu Of: NAVY MIL-P-002863 A]
NAVY MIL-C-28742 A NOTICE 2-1996 CONTROL ENCLOSURE CY-6816/APX-72 FOR TRANSPONDER SET CONTROL C-6280( )(P)/APX
NAVY MIL-C-28742 A VALID NOTICE 1-1986 CONTROL ENCLOSURE CY-6816/APX-72 FOR TRANSPONDER SET CONTROL C-6280( )(P)/APX
NAVY MIL-C-28742 A-1974 CONTROL ENCLOSURE CY-6816/APX-72 FOR TRANSPONDER SET CONTROL C-6280( )(P)/APX

Professional Standard - Geology, water p

DZ/T 0064.71-2021 Groundwater quality analysis method part 71: α-666, β-666, γ-666, δ-666, hexachlorobenzene, P, P′-dideyi, P, P′- Determination of DDD, O,P'-DDT and P,P'-DDT by Gas Chromatography

Korean Agency for Technology and Standards (KATS), water p

KS C IEC 60641-3-2-2015(2020) Specification for pressboard and presspaper for electrical purposes－Part 3：Specifications for individual materials－Sheet 2：Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.
KS M 8469-2008 p-Hydrazinobenzenesulfonic acid hemihydrate
KS M 8518-2004 Sodium ptoluenesulfonchloramide trihydrate
KS P ISO 14969:2003 Quality systemss－Medical devices－Guidance on theapplication of KS P ISO 13485 and KS P ISO 13488
KS P ISO TR 24971:2021 Medical devices — Guidance on the application of KS P ISO 14971
KS C 0916-1995 Electrical apparatus for explosive gas atmospheres-Type of protection"P"
KS C 0916-1995(2000) ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES-TYPE OF PROTECTION "P"
KS W ISO 7315-2009(2014) Aerospace－“P”clamps(loop clamps)for fluid systems－Envelope dimensions
KS R ISO 8027:2005 Road vehicles-Air filter elements for passenger cars-Types P and R-Dimensions
KS R ISO 8027:2013 Road vehicles－Air filter elements for passenger cars－Types P and R－Dimensions
KS C IEC 60079-2:2019 Explosive atmospheres — Part 2: Equipment protection by pressurized enclosures “p”
KS R 3040-2009 Injection nozzle holder type P for road vehicles(with body and with fixing flats )

Association Francaise de Normalisation, water p

NF C26-133-2:1994 Specification for pressboard and presspaper for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : requirements for presspaper, type P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1.
NF C26-131-3-2*NF EN 60641-3-2:2008 Pressboard and presspaper for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1.
NF EN 60641-3-2:2008 Carton comprimé et papier comprimé à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 2 : exigences pour papier comprimé, types P.2.1, P.4.1, P.4.2, P.4.3 et P.6.1
XP V03-022-4*XP ISO/TS 21569-4:2017 Horizontal methods for molecular biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 4 : real-time PCR based screening methods for the detection of the P-nos and P-nos-nptII DNA sequence
NF R16-325:1986 Road vehicles. Air filter elements for passenger cars. Types P and R. Dimensions.
NF U42-509*NF EN 15452:2008 Fertilizers - Determination of chelating agents - Determination of iron chelated by o,p- EDDHA by reversed phase HPLC

U.S. Military Regulations and Norms, water p

ARMY MIL-PRF-53051 B-1998 PUMPING ASSEMBLIES, WHEEL-MOUNTED, DIESEL ENGINE DRIVEN, BULK TRANSFER, FUEL AND POTABLE WATER PUMPING SERVICE [Superseded: ARMY MIL-P-52144 E CANC NOTICE 1, ARMY MIL-P-52144 E (3), ARMY MIL-P-52144 E (2), ARMY MIL-P-52144 E, ARMY MIL-P-52144 D (1)
ARMY MIL-P-43144 E NOTICE 1-1997 PORK CHOPS, DEHYDRATED, UNCOOKED [Use In Lieu Of: ARMY MIL-P-0043144 C (4)]
ARMY MIL-M-49240 A VALID NOTICE 2-2011 Multiplexer, TD-1235(P)/TTC
ARMY MIL-M-49240A (1)-1992 MULTIPLEXER, TD-1235(P)/TTC
ARMY MIL-M-49242 A VALID NOTICE 1-2011 Multiplexer, TD-1237(P)/G
ARMY MIL-P-501 P-1991 PIN, TENT, METAL [Use In Lieu Of: ARMY MIL-P-00501 H]
ARMY MIL-P-3984 J (3)-2000 PROPELLANTS FOR SMALL ARMS AMMUNITION [Use In Lieu Of: ARMY MIL-P-003984 H]
ARMY MIL-R-10932 N NOTICE 3-1997 REFRIGERATORS, PREFABRICATED, PANEL TYPE [Use In Lieu Of: ARMY MIL-R-0010932 P CANC NOTICE 1]

International Electrotechnical Commission (IEC), water p

IEC 60641-3-2:1992 Specification for pressboard and presspaper for electrical purposes; part 3: specifications for individual materials; sheet 2: requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1
IEC 60641-3-2:2007 Specification for pressboard and presspaper for electrical purposes – Part 3: Specifications for individual materials – Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 (Edition 2.0)
IEC 60641-3-2:2008 Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1
IEC GUIDE 115:2021 RLV
Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector

Danish Standards Foundation, water p

DS/EN 60641-3-2:2008 Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1
DS/EN 15803:2010 Conservation of cultural property - Test methods - Determination of water vapour permeability (Î´p)

HU-MSZT, water p

MSZ 9395/2-1979

PL-PKN, water p

PN BN 6023-01-1966
PN C04641-03-1989 Water and waste water Tests for aromatics bydrocarbons Determination of benzene, toluene, ethylbenzene, (m+p) — xylene, isopropylbenzene and o-xylene by gas chromatography
PN C04641-04-1989 Water and waste water Tests for aromatics hydrocarbons Determination of benzene, toluene, (m+p)-xy\ene, o-xylene, styrene by ?head space" gas chromatography
PN L01462-1992 Aerospace. "P" clamps (loop clamps) for fluid systems. Envelope dimensions

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, water p

ITU-R P.837-7 SPANISH-2017 Características de la precipitación para establecer modelos de propagación Serie P Propagación de

IN-BIS, water p

Lithuanian Standards Office , water p

LST EN 60641-3-2-2008 Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 (IEC 60641-3-2:2007)

ES-UNE, water p

UNE-EN 60641-3-2:2008 Specification for pressboard and presspaper for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 (Endorsed by AENOR in September of 2008.)
UNE 104423:1996 ERRATUM SYNTHETIC MATERIALS. APPLICATION. LINING SYSTEMS FOR WATER RESERVOIRS USED FOR IRRIGATION PURPOSES OR WATER STORAGE WITH WATERPROOFING GEOMEMBRANES MADE OUT OF POLYVINYL CHLORIDE (PVC-P) NOT RESISTANT TO BITUMEN.
UNE 104424:2015 Synthetic materials. Application. Waterproofing lining systems for tunnels and galleries made out of manufactured thermoplastic sheets of PVC-P

BR-ABNT, water p

ABNT PB-711-1980

American National Standards Institute （ANSI), water p

ANSI K62.291-1986 Common Name for the Pest Control Chemical (R)- 2-(4-((5- (Trifluoromethyl)-2-Pyridinyl)Oxy)Phenoxy) Propanoic Acid "Fluazifop-P"

U.S. Air Force, water p

AIR FORCE MIL-H-87140 A NOTICE 1-1997 HELMET, FLYER'S HGU-36A/P
AIR FORCE MIL-H-87140 A-1987 HELMET, FLYER'S HGU-36A/P
AIR FORCE MIL-DTL-87174 A-1998 HELMET, FLYER'S HGU-55/P
AIR FORCE MIL-B-83277 A (1)-1978 BOOTS, FLYERS' FWU-8/P
AIR FORCE MIL-B-83277 A-1975 BOOTS, FLYERS' FWU-8/P
AIR FORCE MIL-C-83856 VALID NOTICE 2-2008 Computer, Attack Type CPU-73 A/P
AIR FORCE MIL-P-38184 C VALID NOTICE 1-1989 PARKA, EXTREME COLD WEATHER CWU-8/P
AIR FORCE MIL-P-38184 C-1975 PARKA, EXTREME COLD WEATHER CWU-8/P
AIR FORCE QPL-38271-10-1985 CONNECTOR, OXYGEN MASK TO REGULATOR CRU-60/P
AIR FORCE MIL-J-83382 C (1)-1985 JACKET, FLYER'S, MEN'S SUMMER, FIRE RESISTANT CWU-36/P
AIR FORCE MIL-J-83382 C-1981 JACKET, FLYER'S, MEN'S SUMMER, FIRE RESISTANT CWU-36/P
AIR FORCE QPL-38271-QPD-2010 Connector, Oxygen Mask to Regulator CRU-60/P
AIR FORCE MIL-T-83385 A (1)-1985 TROUSERS, FLYERS', EXTREME COLD WEATHER, CWU-18/P
AIR FORCE MIL-T-83385 A-1984 TROUSERS, FLYERS', EXTREME COLD WEATHER, CWU-18/P
AIR FORCE MIL-M-27529 B VALID NOTICE 1-1989 MITTENS, EXTREME COLD WEATHER SURVIVAL, SRU-10/P
AIR FORCE MIL-M-27529 B-1973 MITTENS, EXTREME COLD WEATHER SURVIVAL, SRU-10/P
AIR FORCE MS26514 REV C VALID NOTICE 5-2008 Computer, Air Navigation, Dead Reckoning Type MB-4A and, Type CPU-26A/P

Professional Standard - Aerospace, water p

QJ 595-1981 Gasket for P (Q60-104) socket

International Telecommunication Union (ITU), water p

ITU-T P.862.3-2007 Application guide for objective quality measurement based on Recommendations P.862, P.862.1 and P.862.2
ITU-T P.862.3 CORR 1-2011 Application guide for objective quality measurement based on Recommendations P.862, P.862.1 and P.862.2 Corrigendum 1 (Study Group 12)
ITU-T P.863.1-2014 Application guide for Recommendation ITU-T P.863
ITU-T P SUPP 27-2017 Application of ITU-T P.863 and ITU-T P.863.1 for speech processed by blind bandwidth extension approaches
ITU-T P.863.1-2013 (Pre-Published) Application Guide for Recommendation ITU-T P.863

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., water p

ASHRAE MN-00-15-1-2000 Thermal Performance of Residential Electric Water Heaters Using Alternative Blowing Agents (See Technical paper 4409@ p.337)

KR-KS, water p

KS P ISO 14969-2003 Quality systemss－Medical devices－Guidance on theapplication of KS P ISO 13485 and KS P ISO 13488
KS P ISO TR 24971-2021 Medical devices — Guidance on the application of KS P ISO 14971
KS C IEC 60079-2-2019 Explosive atmospheres — Part 2: Equipment protection by pressurized enclosures “p”

Group Standards of the People's Republic of China, water p

T/ICMTIA SM006-2021 300mm P/P-type silicon epitaxial wafer for integrated circuit line width 65nm-14nm logic process
T/CECS CECS-CBIMU 10-2017 Standard for P-BIM software function and informationexchange of water supply and drainage design
T/SZBX 057-2021 MBP-P-nuclear power (non asphalt based) polymer self-adhesive membrane waterproofing sheets
T/CASAS 003-2018 4H-SiC Epitaxial Wafers for p-IGBT Devices
T/ICMTIA SM0027-2022 300mm p-type silicon single crystal polished wafer for advanced memory technology

YU-JUS, water p

JUS H.B8.706-1980 Anafym of technical l,l,l-trichloro-2,2-di-(p-chlorophenyl)ethane; Determinotion of chloral hydrate content
JUS H.B5.028-1980 Technical 1,1 ,l-trichloro-2,2-di- (p-chlorophenyl)ethane; (Technical DDT)
JUS N.C6.134-1993 Coaxial cables for cable distribution systems and common antena systems RF 75-5-6 F/V ,RF 75-5-6 S/V,RF75-5-6 F/P,RF 75-5-6 S/P
JUS H.P8.088-1988 Testing of pesticides. DDT, technical. Determination of melting point of separatedfp-p'- DDT
JUS H.B8.701-1980 Anatysis of technical l,l,l-trichloro-2,2-di- (p-chlorophenyl)ethane. Determination of melting-point

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, water p

PREN 6081-2001 Aerospace Series Rivet Universal Head Inch Based Series (Edition P 1;:2005 Edition P 2)
PREN 6081-2005 Aerospace Series Rivet@ Universal Head@ close tolerance Inch series (Edition P 2;:2001 Edition P 1)
PREN 4113-1998 "Aerospace Series Clamps@ Loop (""P"" Type) in Corrosion Resisting Steel@ Passivated with Rubber Cushioning Dimensions@ Masses (Edition P 1)"
PREN 3883-2001 Aerospace Series Heat Resisting Alloy NI-WH2301 Filler Metal for Welding (Edition P 2; Supersedes Edition P 1: December 1994;)
PREN 3884-2001 Aerospace Series Heat Resisting Alloy NI-WH2601 Filler Metal for Welding (Edition P 2; Supersedes Edition P 1: December 1994;)
PREN 3887-2001 Aerospace Series Heat Resisting Alloy CO-WH4101 Filler Metal for Welding (Edition P 2; Supersedes Edition P 1: January 1995;)
PREN 3882-2001 Aerospace Series Heat Resisting Alloy NI-WH1801 Filler Metal for Welding (Edition P 2; Supersedes Edition P 1: December 1994)
PREN 3888-2001 Aerospace Series Heat Resisting Alloy CO-WH1402 Filler Metal for Welding (Edition P 2; Supersedes Edition P 1: January 1995;)
PREN 3953-2001 Aerospace Series Silver Base Alloy AG-B12401 Filler Metal for Brazing Wire (Edition P 2; Supersedes Edition P 1: January 1994)
PREN 4341-2001 Aerospace Series Aluminium Alloy AL-W46431 Filler Metal for Welding Wire and Rod (Edition P 2; Supersedes Edition P 1: March 1997;)
PREN 3719-1999 Aerospace Series Aluminium or Aluminium Alloy Conductors for Electrical Cables Product Standard (Edition P 2; Supersedes Edition P 1: June 1997)
PREN 3612-1990 Aerospace Series Undercuts for Splines (Issue P 1)
PREN 4259-2000 Aerospace Series Metallic Materials Definition of General Terms (Edition P 1)
PREN 9110-2000 Aerospace Series Quality Systems Model for Quality Assurance Applicable to Maintenance Organizations (Edition P 1; Supersedes PREN 9000-2@ Edition P 2)
PREN 4337-2001 Aerospace Series Heat Resisting Alloy NI-WH8901 (NiCr16Ti3Mn2) Filler Metal for Welding Wire and Rod (Edition P 2; Supersedes Edition P 1: March 1997;)
PREN 4339-2001 Aerospace Series Heat Resisting Alloy CO-WH4001 (CoCr29W9) Filler Metal for Welding Wire and Rod (Edition P 2; Supersedes Edition P 1: March 1997;)
PREN 4326-2001 Aerospace Series Heat Resisting Alloy CO-WH4102 (CoCr28W20Ni5V1) Filler Metal for Welding Wire And Rod (Edition P 2; Supersedes Edition P 1: March 1997;)
PREN 3926-2001 Aerospace Series Nickel Base Alloy NI-B40001 Filler Metal for Brazing Borided Foil (Edition P 2; Supersedes Edition P 1: January 1994;)
PREN 9120-2000 Aerospace Series Quality Systems Model for Quality Assurance Applicable to Stockist Distributors (Edition P 1; Supersedes PREN 9000-3@ Edition P 2)
PREN 3155-017-2000 Aerospace Series Electrical Contacts Used in Elements of Connection Part 017: Contacts@ Electrical@ Relay Base@ Female@ Type A@ Crimp@ Class P Product Standard (Edition P 1)
PREN 3155-017-2018 Aerospace series Electrical contacts used in elements of connection Part 017: Contacts@ electrical@ relay base@ female@ type A@ crimp@ class P Product standard (Edition P 2)
PREN 3886-2001 Aerospace Series Heat Resisting Alloy NI-WH1303 Filler Metal for Welding (Edition P 2; Supersedes Edition P 1: January 1995; Replaced by EN 3886)
PREN 6118-2007 Aerospace series Process specification Aluminium base protection for fasteners (Edition P 1)
PREN 3155-069-2006 Aerospace series Electrical contacts used in elements of connection Part 069: Contacts@ electrical@ coaxial@ size 16@ female@ type D@ solder@ class P Product standard (Edition P 1)
PREN 4503-2001 Aerospace Series Non-Metallic Materials Textiles Test Method Determination of Water Soluble Chloride and Sulfate of Aqueous Extracts (Edition P 1)
PREN 3958-2001 Aerospace Series Silver Base Alloy AG-B14001 Filler Metal for Brazing Rolled Foil (Edition P 3; Supersedes Edition P 2: May 1995; Replaced by EN 3958)
PREN 3952-2001 Aerospace Series Silver Base Alloy AG-B10001 Filler Metal for Brazing Wire (Edition P 2; Supersedes Edition P 1: January 1994; Replaced by EN 3952)
PREN 4338-2001 Aerospace Series Heat Resisting Alloy NI-WH3902 (NiCr25Mo10C) Filler Metal for Welding Wire and Rod (Edition P 2; Supersedes Edition P 1: March 1997; Replaced by EN 4338)
PREN 3927-2001 Aerospace Series Nickel Base Alloy NI-B40001 Filler Metal for Brazing Powder or Paste (Edition P 2; Supersedes Edition P 1: January 1994;)
PREN 3943-2001 Aerospace Series Nickel Base Alloy NI-B41204 Filler Metal for Brazing Powder or Paste (Edition P 2; Supersedes Edition P 1: January 1994;)
PREN 3923-2001 Aerospace Series Nickel Base Alloy NI-B41203 Filler Metal for Brazing Powder or Paste (Edition P 2; Supersedes Edition P 1: January 1994;)
PREN 3945-2001 Aerospace Series Nickel Base Alloy NI-B48801 Filler Metal for Brazing Powder or Paste (Edition P 3; Supersedes Edition P 2: May 1995;)
PREN 4327-2001 Aerospace Series Heat Resisting Alloy CO-WH1401 (CoCr26Ni11W8) Filler Metal for Welding Wire and Rod (Edition P 2; Supersedes Edition P 1: March 1997; Replaced by EN 4327)
PREN 4113-2008 "Aerospace series Clamps@ loop (""P"" type) in corrosion resisting steel@ passivated@ with rubber cushioning – Dimensions@ masses (Edition P 2;Incorporates CORR: 1-31-2009)"
PREN 4697-2014 Aerospace series General and installation requirements for passenger seat fittings (Edition P 2)
PREN 4268-2010 Aerospace series Metallic materials Heat treatment facilities General requirements (Edition P 1)
PREN 3964-2001 Aerospace Series Copper CU-BU9001 Filler Metal for Brazing Wire (Edition P 2)
PREN 3964-1994 Aerospace Series Copper CU-BU9001 Filler Metal for Brazing Wire (Edition P 1)
PREN 4473-2009 Aerospace series Aluminium pigmented coatings for fasteners Technical specification (Edition P 2)
PREN 4817-2011 Aerospace series Passive UHF RFID tags intended for aircraft use (Edition P 1)
PREN 4507-2001 Aerospace Series Non-Metallic Materials Textiles Test Method Determination of Water Extractable Matterm (Edition P 1)
PREN 3844-2-2018 Aerospace series Flammability of non-metallic materials Part 2: Small burner test@ horizontal Determination of the horizontal flame propagation (Edition P 2)
PREN 3844-2-1995 Aerospace Series Flammability of Non Metallic Materials Part 2 : Small Burner Test@ Horizontal Determination of the Horizontal Flame Propagation (Edition P 1)

NL-NEN, water p

NEN 7008-1972 P? pipes for soil and waste purposes

Professional Standard - Light Industry, water p

QB/T 2049.7-2013 Glass bulb dimensions for lamps.P series shapes

Society of Automotive Engineers (SAE), water p

SAE AS46700-2-1988 AS46700-709 'P' Section Rubber Seal (General Purpose)

Japanese Industrial Standards Committee (JISC), water p

JIS D 3632:1982 Injection nozzle holder type p for road vehicles (with body and with fixing flats)
JIS C 0932:1993 Electrical apparatus for explosive gas atmospheres -- Type of protection "p"
JIS K 0557:1998 Water used for industrial water and wastewater analysis
JIS K 0312:1999 Method for determination of tetra- through octa-chlorodibenzo-p-dioxins, tetra- through octa-chlorodibenzofurans and coplanar polychlorobiphenyls in industrial water and waste water

Professional Standard - Aviation, water p

HB 7544-1997 55° tapered pipe thread tap Rc11/2 Rc2 P=2.309
HB 7306-1996 Machine and hand taps for processing 300M steel d=12~39mm P=1~2mm
HB 7304-1996 Machine and hand taps for processing 300M steel d=3~6mm P=0.5~1mm
HB 7305-1996 Machine and hand taps for processing 300M steel d=7~10mm P=1~1.5mm
HB 6665-1992 Enveloping Dimensions of P-Clamps for Fluid Line Installation
HB 7543-1997 55° taper pipe thread tap Rc1/16~Rc11/4 P=0.907~2.309
HB 3682-1986 45-12 Type screw rolling wheel used for regular screw thread d＝2~39mm P＝0.35~2mm
HB 3681-1986 54-12 Type screw rolling wheel used for regular screw thread d＝2~45mm P＝0.35~2mm
HB 3683-1986 45-8 Type screw rolling wheel used for regular screw thread d＝2~33mm P＝0.35~2mm
HB 7540-1997 Type 54 thread rolling wheel for 55° tapered pipe thread R1/16~R2 P=0.907~2.309
HB 7311-1996 Interference thread machine and hand taps HB 6545-91AG, BG thread d=33mm~39mm p=1.5mm
HB 7312-1996 Interference thread machine and hand taps HB 6545-91AG, BG thread d=42~45mm p=1.5mm
HB 7315-1996 Interference thread machine and hand taps HB 6545-91CG, DG thread d=33~39mm p=1.5mm
HB 7316-1996 Interference thread machine and hand taps HB 6545-91CG, DG thread d=42~45mm p=1.5mm
HB 7541-1997 55° Taper Pipe Thread Roller Type 45 R1/16~R3/4 P=0.907~1.814
HB 7308-1996 Interference thread machine and hand taps HB 6545-91AG, BG thread d=3~4mm p=0.5~0.7mm
HB 7309-1996 Interference thread machine and hand taps HB 6545-91AG, BG thread d=5~10mm p=0.8~1.5mm
HB 7310-1996 Interference thread machine and hand taps HB 6545-91AG, BG thread d=12~30 p=1.25~1.5mm
HB 7313-1996 Interference thread machine and hand taps HB 6545-91CG, DG thread d=5~10mm p=0.8~1.5mm
HB 3684-1986 Thread rolling shaft for rolling ordinary thread rolling wheel d=2~45mm P=0.35~2mm

IETF - Internet Engineering Task Force, water p

RFC 7582-2015 Multicast Virtual Private Network (MVPN): Using Bidirectional P-Tunnels

American Society of Mechanical Engineers (ASME), water p

ASME N-594-2001 Repairs to P-4 and P-5A Materials for Pumps and Valves without Postweld Heat Treatment Section III, Division 1

RO-ASRO, water p

STAS 1317-1983
STAS 177-1989 Petroleum prodncts LIQUID FUEL TYPE P AND TYPE M FOR NONIDUSTRIAL PURPOSE

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, water p

SERIES P SUPP 27-2017 Application of ITU-T P.863 and ITU-T P.863.1 for speech processed by blind bandwidth extension approaches (Study Group 12)

Professional Standard - Chemical Industry, water p

HG/T 3139.9-2001 Vertical reducer for tank series P belt-driving reducer

API - American Petroleum Institute, water p

API PUBL 4660-1997 Production Tank Emissions Model (E&P Tank Version 1.0) (Disk Available)

European Telecommunications Standards Institute (ETSI), water p

ETSI EN 300 631-1-1997 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS); Part 1: Antennas for Point-to-Point (P-P) Radio Links in the 1 GHz to 3 GHz Band (V1.1.1)

Military Standards (MIL-STD), water p

DOD P-L-790 (1)-1957 LUBRICANT, SILICATE CEMENT, DENTAL [Use In Lieu Of: DOD P-L-00790 A]

International Organization for Standardization (ISO), water p

ISO 7315:1985 Aerospace — "P" clamps (loop clamps) for fluid tubing installations — Dimensions
ISO 8027:1984 Road vehicles; Air filter elements for passenger cars; Types P and R; Dimensions
ISO/TS 21569-4:2016 Horizontal methods for molecular biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 4: Real-time PCR based screening methods for the detection of the P-nos and P-nos-nptII DNA sequences

Professional Standard - Agriculture, water p

2422药典二部-2010 APPENDIX XIX P GUIDING PRINCIPLES FOR APPLICATION OF MICROBIAL LIMIT TEST

General Motors do Brasil, water p

GMSA EMS.TI.0207-2011 Powder coating Tinta p贸 Do Not use on New Programs; No Replacement

(U.S.) Ford Automotive Standards, water p

FORD ESF-M2C143-A-2004 LUBRICATING OIL, HIGH TEMPERATURE, P/M IMPREGNATING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2C143-A-2009 LUBRICATING OIL, HIGH TEMPERATURE, P/M IMPREGNATING ***TO BE USED WITH FORD WSS-M99P1111-A***

American Society for Testing and Materials (ASTM), water p

ASTM A839/A839M-96 Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
ASTM B823-09 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
ASTM B783-10 Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts

NO-SN, water p

NS 3420-P-2008 Specification texts for building,construction and installations Part P:Metal works

European Association of Aerospace Industries, water p

AECMA PREN 2565-1993 Aerospace Series Preparation of Carbon Fibre Reinforced Resin Panels for Test Purposes Edition P 2

Aerospace, Security and Defence Industries Association of Europe (ASD), water p

ASD-STAN PREN 4697-2014 Aerospace series General and installation requirements for passenger seat fittings (Edition P 2)
ASD-STAN PREN 4268-2010 Aerospace series Metallic materials Heat treatment facilities General requirements (Edition P 1)

Standard Association of Australia （SAA）, water p

AS 3565.1:2004 Meters for water supply - Cold water meters

国家市场监督管理总局、中国国家标准化管理委员会, water p

GB/T 39481-2020 Utilization of desalinated seawater—Water quality guidelines for industrial uses