ZH
RU
ES

specific stiffness material

specific stiffness material, Total:498 items.

In the international standard classification, specific stiffness material involves: Adhesives, Cellular materials, Materials for the reinforcement of composites, Pipeline components and pipelines, Plastics, Products of the chemical industry, Products of the textile industry, Protection against fire, Testing of metals, Measurement of volume, mass, density, viscosity, Footwear, Rubber, Rubber and plastics products, Fuels, Inorganic chemicals, Non-metalliferous minerals, Insulating materials, Shipbuilding and marine structures in general, Waxes, bituminous materials and other petroleum products, Wood, sawlogs and sawn timber, Wood-based panels, Construction materials, Road vehicle systems, Refractories, Elements of buildings, Linear and angular measurements, Solar energy engineering, Analytical chemistry, Cutting tools, Paints and varnishes, Machine tools, Woodworking equipment, Protection of and in buildings, Insulating fluids, Structures of buildings, Farming and forestry, Materials for aerospace construction, Optics and optical measurements, Colour coding, Accident and disaster control, Paint ingredients, Environmental protection, Non-destructive testing, Reinforced plastics, Ceramics, Farm buildings, structures and installations, Vibrations, shock and vibration measurements, Radiation protection, Welding, brazing and soldering.

International Organization for Standardization (ISO), specific stiffness material

ISO 4587:2003 Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 180:1982 Plastics — Determination of Izod impact strength of rigid materials
ISO 13966:1998 Thermoplastics pipes and fittings - Nominal ring stiffnesses
ISO 458-1:1985 Plastics; Determination of stiffness in torsion of flexible materials; Part 1 : General method
ISO 5600:2007 Rubber - Determination of adhesion to rigid materials using conical shaped parts
ISO 5600:1986 Rubber; Determination of adhesion to rigid materials using conical shaped parts
ISO 8840:1987 Refractory materials; Determination of bulk density of granular materials (grain density)
ISO 8840:2021 Refractory materials - Determination of bulk density of granular materials (grain density)
ISO 5600:2011 Rubber - Determination of adhesion to rigid materials using conical shaped parts
ISO 5600:2017 Rubber - Determination of adhesion to rigid materials using conical shaped parts
ISO 10113:2020 Metallic materials — Sheet and strip — Determination of plastic strain ratio
ISO 2796:1980 Cellular plastics — Test for dimensional stability of rigid materials
ISO 2976:1973 Abrasive belts; Selection of width/length combinations
ISO/R 458:1965 Plastics — Determination of stiffness in torsion as a function of temperature
ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness
ISO 13967:1998 Thermoplastics fittings - Determination of ring stiffness
ISO 15082:1999 Road vehicles - Tests for rigid plastic safety glazing materials
ISO/TR 2799:1978 Cellular plastics — Determination of the temperature at which fixed permanent deformation of rigid materials occurs under compressive load
ISO 2976:2005 Coated abrasives - Abrasive belts - Selection of width/length combinations
ISO/TS 12512:2017 Glass reinforced thermosetting plastic (GRP) pipes - Determination of initial specific ring stiffness using segment test species cut from a pipe
ISO 6999:1983 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of density; Pycnometric method
ISO 6106:1979 Abrasive products; Grain sizes of diamond or cubic boron nitride
ISO 15082:2016 Road vehicles - Tests for rigid plastic safety glazing materials
ISO 8130-2:1992 Coating powders; part 2: determination of density by gas comparison pyknometer (referee method)
ISO 8130-2:2021 Coating powders - Part 2: Determination of density by gas comparison pycnometer (referee method)
ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
ISO 5600:1979 Rubber — Determination of adhesion to rigid materials using conical shaped parts
ISO/CD 2440 Flexible and rigid cellular polymeric materials — Accelerated ageing tests
ISO 458-2:1985 Plastics; Determination of stiffness in torsion of flexible materials; Part 2 : Application to plasticized compounds of homopolymers and copolymers of vinyl chloride

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, specific stiffness material

GB/T 7124-2008 Adhesives.Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
GB/T 9647-2015 Determination of Ring Stiffness of Thermoplastic Pipes
GB/T 9647-2003 Thermoplastics pipes--Determination of ring stiffness
GB/T 41936.1-2022 Plastics—Determination of stiffness in torsion of flexible materials—Part 1: General method
GB/T 7761-2003 Rubber--Determination of adhesion to rigid materials using conical shaped parts
GB/T 10671-1989 Test method for specific optical density of smoke generated by solid materials
GB/T 10671-2023 Specific optical density test method for smoke production from solid materials
GB/T 10671-2008 Test method for specific optical density of smoke generated by solid materials
GB/T 7761-1987 Rubber--Determination of adhesion to rigid materials using conical shaped parts
GB/T 25968-2010 Test methods of solar transmittance and solar absorptance of materials by spectrophotometer
GB/T 4984-1985 Chemical analysis methods of zirconia-alumina refractories
GB/T 41936.2-2022 Plastics—Determination of stiffness in torsion of flexible materials—Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
GB/T 1713-1989 Determination of density of pigments--Pyknometer method
GB/T 1713-2008 Determination of density of pigments.Pyknometer method
GB/T 9287-1988 Comparison of ease of dispersion of pigments--Oscillatory shaking method
GB 9287-1988 Comparison of ease of dispersion of pigments－Oscillatory shaking method
GB/T 26930.3-2011 Carbonaceous materials for the production of primary aluminium.Pitch for electrodes.Part 3: Determination of density.Pyknometric method
GB/T 229-2007 Metallic materials- Charpy pendulum impact test method

SE-SIS, specific stiffness material

SIS SS 16 13 52-1986 Plastics - Determination of Izod impact strength of rigid materials
SIS SS 16 13 51-1986 Plastics - Determination of Charpy impact strength of rigid materials
SIS SS 16 95 24-1983 Cellular plastics - Compression test for rigid materials
SIS SS 3548-1987 Plastics pipes - Ring stiffness testing - Creep method
SIS SS 3519-1986 Plasties pipes - Ring stiffness testing - Relaxation method
SIS SS 02 52 65-1989 Acoustics — Determination of dynamic stiffness — Part 1: Materials used under floating floors in dwellings
SIS SS 3632-1990 Plastics pipes — Ring stiffness testing — Method with constant deflection speed

PL-PKN, specific stiffness material

PN O79119-1974 Packaging materials Determination of flexual rigidity
PN C89046-1992 Plastics. Determination of apparent density of rigid cellular materials
PN C89072-1963 Plas?ics Determinotion of shear strenght o? rigid cellular maierials
PN C89073-1963 Plastics. Determination of tear strength of non rigid cellular niaterials
PN C89071-1993 Cellular plastics. Compression test for rigid materials
PN C89076-1974 Plas?ics Determination of stiffness in ?orsion as a function o? temperatur?
PN C04208-1990 Raw-rubber and rubber compounds Dctcrmination ol' viscosity and rat? ol curc by thc Mooney viscometer
PN BN 6094-02-1965

YU-JUS, specific stiffness material

JUS G.S2.617-1988 Plastics. Determination of Izod impact strength of rigid materials
JUS G.S2.630-1991 Plastics. Determination of stiffness in torsion of flexible materials. General method
JUS G.S2.813-1990 Cellular plastics. Compression test for rigid materials
JUS Z.S0.010-1982 Safety colours and signs. Colorimetric andphotametric properties of materials
JUS G.S2.815-1990 Cellular plastics. Determination of water vapour transmission rate of rigid materials

CZ-CSN, specific stiffness material

CSN 64 5436-1974 Testing of cellular materials. Determination of shear strength of rigid cellular materials
CSN 77 0310-1978 Metliod of (lctorininin" tlie stiffno ot pa.'kaging malorials. H-O-M test.
CSN 64 5444-1974 Testing of cellular materials. Bending test for rigid cellular materials
CSN 80 0858-1974 Testing of stiffness and resiliance of textile fabrics
CSN 72 6113-1965 Refractory building materials. Refractory silicon-carbide products
CSN 72 6113-1985 Refractory building materials. Refractory silioon-carbido products
CSN 22 4686-1976 Diamond toroidal drills for drilling of hard non-metallic materials.
CSN ISO 9052-1:1993 Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings
CSN 72 5031-1973 Testing of fired ceramic materials. Determination of medium specific heat
CSN ISO 10113:1994 Metallic materials.Sheet and strips.Determination of plastic strain ratio
CSN 72 5019-1982 Testing of ceramic electrotechnlc materials. Methods of the modulus of rigidity
CSN 72 5032-1973 Testing of fired ceram,ic materials Determination of the specific thermal conductivity

European Committee for Standardization (CEN), specific stiffness material

EN ISO 9969:1995 Thermoplastic Pipes - Determination of Ring Stiffness (ISO 9969 : 1994)
EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness
EN ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)
EN 29052-1:1992 Acoustics - Determination of Dynamic Stiffness - Part 1: Materials Used Under Floating Floors in Dwellings
EN 1225:1996 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Creep Factor under Wet Conditions and Calculation of the Long-Term Specific Ring Stiffness
HD 352.3.3 S1-1985 Specification for insulating materials based on mica; part 3: specifications for individual materials; sheet 3: specifications for rigid mica materials for heating equipment

CEN - European Committee for Standardization, specific stiffness material

EN ISO 9969:2007 Thermoplastics pipes - Determination of ring stiffness

RU-GOST R, specific stiffness material

GOST 6943.11-1993 Textile glass. Woven fabrics. Method for determination of conventional flexural stiffness. Fixed angle flexometer method
GOST 6943.11-1979 Glass textile products. Methods of flexible rigidity
GOST 24684-1987 Materials for clothes. Norms of hardness
GOST 27356-1987 Synthetic materials for low soling. Method of determination of hardnees under static beuding
GOST 32183-2013 Semi-solid bituminous materials. Determination of density by pycnometer
GOST 31706-2011 Acoustical materials used floating floors in dwellings. Method for determination of dynamic stiffness
GOST 10550-1993 Textiles. Cloth. Methods for determination of resistance to blend
GOST R 50078-1992 Modified wood. Method for determination of rigidity of bushes
GOST 29319-1992 Paints and varnishes. Visual comparison of the colour of paints
GOST 43-1985 Automatic multispindle horizontal bar lathes. Standards of accuracy and rigidity
GOST 25338-1991 Woodworking equipment. Accuracy and rigidity test. General requirements
GOST 23250-1978 Building materials. Method of specific heat determination
GOST 18100-1980 Single-spindle bar turret automatics. Standards of accuracy and rigidity
GOST R 57183-2016 Timber structures. Test methods for determination of embedment strength and ratio foundation stiffness values for dowel type fasteners
GOST 26564.1-1985 Silicon carbide refractory materials and products. Methods for the determination of silicon carbide
GOST 26564.2-1985 Silicon carbide refractory materials and products. Methods for the determination of free carbon
GOST 26564.4-1985 Silicon carbide refractory materials and products. Method for the determination of free silicon
GOST 7228-1993 Woodworking equipment. Thicknessing machines. Basic parameters. Norms of accuracy and rigidity
GOST R ISO 10113-2014 Metallic materials. Sheet and strip. Determination of plastic strain ratio
GOST 7315-1992 Woodworkig machinery. Four-sided planers. Basic parameters. Norms of accuracy and rigidity
GOST 26564.3-1985 Silicon carbide refractory materials and products. Methods for the determination of silicon dioxide
GOST R 57969-2017 Polymer composites. Determination of specific heat capacity by differential scanning calorimetry with temperature modulation
GOST 20870-1975 Rigid cellular plastics. Method for the determination of water - vapour permeability
GOST R 52662-2006 Paint materials. Colorimetry. Part 2. Colour measurement
GOST 8425-1990 Woodworking machinery. Circular rip saws. Basic parameters. Norms of accuracy and rigidity
GOST R ISO 18437-4-2014 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 4. Dynamic stiffness method
GOST R ISO 21687-2014 Carbonaceous materials for the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
GOST 19266-1979 Paintwork materials. Methods of colour determination
GOST 26564.0-1985 Silicon carbide refractory materials and products. General requirements for methods of chemical analysis
GOST 34367.1-2017 Plastics. Acquisition and presentation of comparable single-point data for moulding materials

Danish Standards Foundation, specific stiffness material

DS/EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness
DS/EN 1228:1998 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
DS/EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness
DS/EN 29052-1:1993 Acoustics. Determination of dynamic stiffness. Part 1: Materials used under floating floors in dwellings
DS/EN 29 052-1:1993 Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings
DS/ISO 9052-1:1992 Acoustics. Determination of dynamic stiffness. Part 1: Materials used under floating floors in dwellings
DS/EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio
DS/EN ISO 10619-1:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
DS/EN 60893-3-2/A1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
DS/EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
DS/EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
DS/EN 60893-3-5/A1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
DS/EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
DS/EN 60893-3-6/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
DS/EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
DS/EN 60893-3-4/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
DS/EN 60893-3-1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets
DS/EN ISO 2440/A1:2010 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
DS/EN ISO 2440:2000 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
DS/EN ISO 10619-2:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
DS/ISO 10619-2:2021 Rubber and plastics hoses and tubing – Measurement of flexibility and stiffness – Part 2: Bending tests at sub-ambient temperatures
DS/EN ISO 2814:2006 Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour

Korean Agency for Technology and Standards (KATS), specific stiffness material

KS F 2868-2003(2018) Determination of dynamic stiffness of materials used under floating floors in dwellings
KS M ISO 458-1-2007(2022) Plastics－Determination of stiffness in torsion of flexible materials－Part 1：General method
KS M ISO 458-1-2007(2017) Plastics－Determination of stiffness in torsion of flexible materials－Part 1：General method
KS M ISO 458-1:2007 Plastics－Determination of stiffness in torsion of flexible materials－Part 1：General method
KS M ISO 4897-2002(2022) Cellular plastics－Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
KS M ISO 4897-2002(2017) Cellular plastics－Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
KS M ISO 9969-2016(2021) Thermoplastics pipes－Determination of ring stiffness
KS F 2198-2016 Determination of density and specific gravity of wood
KS F 2198-2022 Determination of density and specific gravity of wood
KS M 3061-1993 Testing method for stiffness of plastics by means of a cantilever beam
KS M ISO 1922-2013(2018) Rigid cellular plastics — Determination of shear strength
KS F 2198-2001 Determination of density and specific gravity of wood
KS R ISO 15082:2013 Road vehicles-Tests for rigid plastic safety glazing materials
KS R ISO 15082:2003 Road vehicles-Tests for rigid plastic safety glazing materials
KS R ISO 15082:2018 Road vehicles — Tests for rigid plastic safety glazing materials
KS R ISO 15082-2023 Testing of Rigid Plastic Safety Polishing Materials for Road Vehicles
KS C 2361-1998 RIGID MICA MATERIALS FOR ELECTRIC HEATING EQUIPMENT
KS C 2361-1980 RIGID MICA MATERIALS FOR ELECTRIC HEATING EQUIPMENT
KS M ISO 6999:2003 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of density-Pyknometric method
KS M 3061-2008(2013) Testing method for stiffness of plastics by means of a cantilever beam
KS D 8511-2003 Method of determining the plastic strain ratio for metallic sheet and strip
KS M ISO 4590:2018 Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells
KS M 3065-2003 TESTING MATHOD FOR DEFLECTION TEMPERATURE OF RIGID PLASTICS UNDER LOAD
KS M ISO 13966-2003(2018)
KS M 3065-1982 TESTING MATHOD FOR DEFLECTION TEMPERATURE OF RIGID PLASTICS UNDER LOAD
KS B ISO 148-2:2004 Metallic materials-Charpy pendulum impact test-Part 2:Verification of test machines
KS B ISO 148-2:2013 Metallic materials－Charpy pendulum impact test－Part 2：Verification of test machines
KS M ISO 10619-1:2019 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature
KS M ISO 10619-1:2014 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part1: Bending tests at ambient temperature
KS M 3016-2011 Testing method of the density and specific gravity for plastics
KS M 3817-2002 Methods for comparison of surface roughness of plastics
KS M 3817-1982 Methods for comparison of surface roughness of plastics
KS L 1201-2009 Testing method for specific gravity of fired whiteware materials
KS L 1201-1999 Testing method for specific gravity of fired whiteware materials
KS M ISO 2440:2002 Flexible and rigid cellular polymeric materials-Accelerated ageing tests
KS M ISO 2440:2017 Flexible and rigid cellular polymeric materials－Accelerated ageing tests
KS M 3863-1995(2001) CELLULAR PLASTICS-SPECIFICATION FOR RIGID CELLULAR MATERIALS USED IN THE THERMAL INSULATION OF BUILDINGS
KS M ISO 21687:2011 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
KS M ISO 21687:2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS M ISO 14828-2016(2021) Glass-reinforced thermosetting plastics (GRP) pipes－ Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor
KS M ISO 21687-2016(2021) Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS A 4508-1980(2000) TESTING METHOD OF SCATTERING-RATIO OF LOW-BACKSCATTERING MATERIALS
KS M ISO 458-2-2003(2018) Plastics－Determination of stiffness in torsion of flexible materials－Part 2：Application to plasticized compounds of homopolymers and copolymers of vinyl chloride

NO-SN, specific stiffness material

NS 9503-1984 Plastics - Determination of Izod impact strength of rigid materials

Association Francaise de Normalisation, specific stiffness material

NF P92-501:1995 Safety against fire - Building materials - Reaction to fire tests - Radiation test used for rigid materials, or for materials on rigid substrates (flooring and finishes) of all thicknesses, and for flexible materials thicker that 5 mm.
NF EN 1228:1996 Systèmes de canalisations en plastique - Tubes en plastique thermodurcissable renforcé de verre (PRV) - Détermination de la rigidité annulaire spécifique initiale.
NF T51-102*NF ISO 458-1:1986 Plastics. Determination of stiffness in torsion of flexible materials. Part 1 : general method.
NF P75-302:1987 Isolants thermiques de bâtiment manufacturés - Détermination de l'absorption d'eau par gravité des isolants rigides et semi-rigides - Non hydrophilie.
NF R14-601:2000 Road vehicles - Tests for rigid plastic safety glazing materials.
NF T56-103:1979 Cellular materials based on rubber or plastics. Determination of tensile properties of rigid cellular materials.
NF T54-983*NF EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness
NF T56-104:1978 Ruber or plastics based cellular products. Determination of punching proof stress of rigid cellular materials.
NF E75-065*NF ISO 2976:2005 Coated abrasives - Abrasive belts - Selection of width/length combinations.
NF T20-170*NF ISO 6999:1986 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Determination of density. Pyknometric method.
NF T51-012:1957 Plastics. Determination of bulk factor of moulding materials.
NF EN 29052-1:1992 Acoustique - Détermination de la raideur dynamique - Partie 1 : matériaux utilisés sous les dalles flottantes dans les bâtiments d'habitation.
NF C26-183-2/A1*NF EN 60893-3-2/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins
NF P75-306:1987 Isolants thermiques de bâtiment manufacturés - Détermination conventionnelle du caractère de perméabilité à l'eau à 24 h des isolants rigides
NF EN 61212-2:2011 Matériaux isolants - Tubes et barres industriels, rigides, ronds, stratifiés, à base de résines thermodurcissables, à usages électriques - Partie 2 : méthodes d'essai
NF C26-183-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1 : specification for individual materials - Requirements for types of industrial rigid laminated sheets.
NF C26-183-2*NF EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins.
NF A03-658*NF EN ISO 10113:2020 Metallic materials - Sheet and strip - Determination of plastic strain ratio
NF ISO 458-1:1986 Plastiques - Détermination de la rigidité en torsion des plastiques souples - Partie 1: méthode générale
NF T47-203-1*NF EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1 : bending tests at ambient temperature
NF EN ISO 10619-1:2018 Tuyaux et tubes en caoutchouc et en plastique - Mesurage de la flexibilité et de la rigidité - Partie 1 : essais de courbure à température ambiante
NF C26-183-3*NF EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3 : specification for individual materials - Requirements for rigid laminated sheets based on melamine resins
NF P21-382*NF EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels.
F00-003:1987 Railway material in general. Density of materials.
NF T54-406:1996 Plastics. Single or multiple wall rigid sheets for horticultural greenhouses. Joint specifications and special characteristics. Assessment methods.
NF C26-183-6/A2*NF EN IEC 60893-3-6/A2:2018 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
NF T56-117*NF EN ISO 2440:2019 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
NF EN ISO 2440:2019 Matériaux polymères alvéolaires souples et rigides - Essais de vieillissement accéléré

KR-KS, specific stiffness material

KS F 2868-2003(2023) Determination of dynamic stiffness of materials used under floating floors in dwellings
KS B 0811-2003(2023)
KS M ISO 9969-2016 Thermoplastics pipes－Determination of ring stiffness
KS M ISO 6999-2003(2023)
KS R ISO 15082-2018 Road vehicles — Tests for rigid plastic safety glazing materials
KS M ISO 4590-2018 Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells
KS M ISO 10619-1-2019 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature
KS M ISO 14828-2016 Glass-reinforced thermosetting plastics (GRP) pipes－ Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor
KS M ISO 21687-2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS M ISO 2440-2022 Flexible and rigid cellular polymeric materials — Accelerated ageing tests

ZA-SANS, specific stiffness material

SANS 5901:1978 True relative density of refractory materials (Pycnometer method)

AENOR, specific stiffness material

UNE 23721:1990 REACTION TO FIRE TEST OF BUILDING MATERIALS. RADIATION TEST USED FOR RIGID MATERIALS, OR FOR MATERIALS ON RIGID SUBSTRATES (FLOORING AN FINISHES) OF ALL THICKNESSES, AND FOR FLEXIBLE MATERIALS THICKER THAN 5 MM.
UNE-EN 1228:1996 PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL SPECIFIC RING STIFFNESS.
UNE 61009:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE REFRACTORIES OF VERY HIGH CONTENT IN ALUMINA. REFRACTORIES OF CORUNDUM
UNE 64023:1970 MIXED FEEDS AND RAW MATERIALS. DETERMINATION OF IRON COLORIMETRIC METHOD.
UNE-EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)
UNE 64026:1970 MIXED FEEDS AND RAW MATERIALS. QUANTITATIVE DETERMINATION OF MANGANSE. COLORIMETRIC METHOD.
UNE-EN 60893-3-6:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
UNE-EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
UNE-EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
UNE-EN 60893-3-2:2004/A1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
UNE-EN 60893-3-4:2004/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
UNE-EN 29052-1:1994 ACOUSTICS. DETERMINATION OF DYNAMIC STIFFNESS. PART 1: MATERIALS USED UNDER FLOATING FLOORS IN DWELLINGS. (ISO 9052-1:1989).
UNE 22164:1994 DETERMINATION OF BET SPECIFIC SURFACE FOR SEPIOLITIC MATERIALS.

American Society for Testing and Materials (ASTM), specific stiffness material

ASTM D1480-21 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D2395-17 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM D2395-14 Standard Test Methods for Density and Specific Gravity 40;Relative Density41; of Wood and Wood-Based Materials
ASTM D2395-14e1 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM D70-03 Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM D70-97 Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM D1480-02e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-07 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM G171-03 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G171-03(2009)e1 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G171-03(2017) Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G171-03(2009)e2 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM D70-09e1 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM A833-17 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-19 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM D7499/D7499M-09(2023) Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
ASTM D1481-93(1997) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-91 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-02(2007) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D70-17 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM E662-13 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-12 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-21ae1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-14 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-15a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-13a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-13b Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-12a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D1480-93(1997) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM E662-03e2 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-03e1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-03 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-01 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-97 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-21 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-06e1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D6111-03 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement
ASTM D6575/D6575M-16 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
ASTM E972-96(2007) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
ASTM E972-96 Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
ASTM E972-96(2002) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
ASTM E972-96(2013) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
ASTM D6575/D6575M-22 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
ASTM D1481-17 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM C604-18 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D1622-08 Standard Test Method for Apparent Density of Rigid Cellular Plastics
ASTM D8329-20 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
ASTM D8329-21 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
ASTM D2395-93(1997)e1 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D2395-06 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D2395-07 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D2395-07a Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D2395-93(1997)e2 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D2395-02 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D2395-17(2022) Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM D2395-07ae1 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM C578-03b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-03a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-03 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM D6874-22 Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation
ASTM D6874-21 Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation
ASTM D6874-22a Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation
ASTM D6111-13 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
ASTM D6111-13a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
ASTM C604-18(2023) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM F904-16 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM C1594-11(2017) Standard Specification for Polyimide Rigid Cellular Thermal Insulation
ASTM D2304-23 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
ASTM D2304-18 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
ASTM C578-14a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM F904-98 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM F904-98(2003) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM D6874-20 Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation
ASTM D1622-20 Standard Test Method for Apparent Density of Rigid Cellular Plastics
ASTM E812-91(1997) Standard Test Method for Crack Strength of Slow-Bend Precracked Charpy Specimens of High-Strength Metallic Materials (Withdrawn 2005)
ASTM E494-20 Standard Practice for Measuring Ultrasonic Velocity in Materials by Comparative Pulse-Echo Method
ASTM D7710-14 Standard Test Method for Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials
ASTM C1126-98 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
ASTM C1126-00 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
ASTM C1029-15 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
ASTM C1126-10 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
ASTM E903-12 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
ASTM F904-98(2008) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials

Lithuanian Standards Office , specific stiffness material

LST EN 1228-2002 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
LST EN 29052-1-2002 Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings
LST EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2007)
LST EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)

British Standards Institution (BSI), specific stiffness material

BS EN 1228:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial specific ring stiffness
BS 2782-1 Method 153A:1991 Methods of testing plastics. Thermal properties. Determination of stiffness in torsion of flexible materials (general method)
BS EN 29052-1:1992 Acoustics. Method for the determination of dynamic stiffness.. Materials used under floating floors in dwellings
BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
BS EN ISO 13967:2010 Thermoplastics fittings. Determination of ring stiffness
BS EN ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness
BS 2782-1 Method 153B:1991 Methods of testing plastics. Thermal properties. Determination of stiffness in torsion of flexible materials (method for vinyl chloride compounds)
BS ISO 2976:2005 Coated abrasives - Abrasive belts - Selection of width/length combinations
BS EN ISO 10113:2020 Metallic materials. Sheet and strip. Determination of plastic strain ratio
BS 5378-2:1980 Safety signs and colours - Specification for colorimetric and photometric properties of materials
BS EN ISO 179:1997 Plastics. Determination of Charpy impact strength
BS EN ISO 10619-1:2018 Tracked Changes. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at ambient temperature
BS EN ISO 8130-2:2010 Coating powders. Determination of density by gas comparison pyknometer (referee method)
PD ISO/TS 12512:2017 Glass reinforced thermosetting plastic (GRP) pipes. Determination of initial specific ring stiffness using segment test species cut from a pipe
BS ISO 15082:2016 Road vehicles. Tests for rigid plastic safety glazing materials
BS EN ISO 2440:2019 Flexible and rigid cellular polymeric materials. Accelerated ageing tests
BS PD IEC/TR 60893-4:2014 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values
BS EN ISO 10619-2:2021 Tracked Changes. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures
BS EN ISO 9969:2016 Tracked Changes. Thermoplastics pipes. Determination of ring stiffness
BS ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
BS EN ISO 2814:2006 Paints and varnishes. Comparison of contrast ratio (hiding power) of paints of the same type and colour
BS EN ISO 8130-2:2021 Tracked Changes. Coating powders. Determination of density by gas comparison pyknometer (referee method)
BS EN ISO 2811-1:2016 Paints and varnishes. Determination of density. Pycnometer method

German Institute for Standardization, specific stiffness material

DIN EN 1228:1996-08 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996
DIN 51913:2001 Testing of carbon materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN EN ISO 9054:2000-01 Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990); German version EN ISO 9054:1999
DIN 51907:2013-12 Testing of carbonaceous materials - Determination of density with liquid pycnometer - Binding and impregnating materials
DIN 51907:2013 Testing of carbonaceous materials - Determination of density with liquid pycnometer - Binding and impregnating materials
DIN EN ISO 9969:2016-06 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016); German version EN ISO 9969:2016
DIN EN ISO 13967:2010-04 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009); German version EN ISO 13967:2009
DIN 29972:1988-01 Aerospace; rigid cellular materials; sheet; technical specification
DIN ISO 2976:2005 Coated abrasives - Abrasive belts - Selection of width/length combinations (ISO 2976:2005)
DIN EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009); German version EN ISO 13967:2009
DIN EN 29052-1:1992-08 Acoustics; determination of dynamic stiffness; part 1: materials used under floating floors in dwellings; german version EN 29052-1:1991
DIN EN ISO 10113:2014 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2006); German version EN ISO 10113:2014
DIN EN ISO 10113:2021-06 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2020, Corrected version 2020-11); German version EN ISO 10113:2020
DIN EN 12697-26/A1:2022 Bituminous mixtures - Test methods - Part 26: Stiffness; German and English version EN 12697-26:2018/prA1:2022
DIN EN 12697-26:2020 Bituminous mixtures - Test methods - Part 26: Stiffness
DIN 51913:2013-05 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN 51907:1997 Testing of carbon materials - Determination of density with liquid pycnometer - Binding and impregnating materials
DIN 51907:2012 Testing of carbonaceous materials - Determination of density with liquid pycnometer - Binding and impregnating materials
DIN EN ISO 10619-1:2018-05 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017); German version EN ISO 10619-1:2018
DIN EN ISO 9967:2016-07 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016); German version EN ISO 9967:2016
DIN EN ISO 2440:2020-03 Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2019); German version EN ISO 2440:2019
DIN 51911:2020-12 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN EN ISO 10113:2017 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO/DIS 10113:2017); German and English version prEN ISO 10113:2017

FI-SFS, specific stiffness material

SFS-ISO 458/1 E:1986 Plastics. Determination of stiffness in torsion of flexible materials. Part 1: General method
SFS-ISO 4897:1987 This standard is approved in English
SFS 251-1977

RO-ASRO, specific stiffness material

STAS SR 13237-1994 Building physics. Heat engineering. Determination of volume percentage of open and closed cells of rigid materials.
STAS 9594-1974 PLASTICS Determination of stiffness in torsion as a function of temperature
STAS 9209-1973 Rigid cellular plastics DETERMINATION OF APARENT DENSITY
STAS 9281/2-1991 Carborundic refractory materials. Total carbon content determination

SAE - SAE International, specific stiffness material

SAE AMS3583D-1995 PLASTIC TUBING@ ELECTRICAL INSULATION CROSSLINDED POLYVINYL CHLORIDE@ SEMI-RIGID HEAT SHRINKABLE 2 TO 1 SHRINK RATIO
SAE AMS3638E-1988 PLASTIC TUBING@ ELECTRICAL INSULATION Irradiated Polyolefin@ Pigmented@ Semi-Rigid@ Heat-Shrinkable 2 to 1 Shrink Ratio

Professional Standard - Ferrous Metallurgy, specific stiffness material

YB/T 102-2007 Fused alumina for refractories
YB/T 917-1997 Carbonaceous materials.Determination of vanadium content.Colorimetric method

Japanese Industrial Standards Committee (JISC), specific stiffness material

JIS C 2253:1992 Rigid mica materials for punching
JIS C 2251:1992 Rigid mica materials for heat molding
JIS C 2252:1992 Rigid mica materials for commutator separators
JIS C 2254:2004 Rigid mica materials for electric heating equipment
JIS C 2254:2011 Rigid mica materials for electric heating equipment
JIS C 2254:1992 Rigid mica materials for electric heating equipment
JIS K 7112:1980 Methods for determining the density and specific gravity of plastics
JIS K 7104:1976 Methods for comparison of surface roughness of plastics
JIS Z 2254:2021 Metallic materials -- Sheet and strip -- Determination of plastic strain ratio

Group Standards of the People's Republic of China, specific stiffness material

T/CECS 10247-2022
T/CASME 792-2023 Diamond machining tools for special ceramic materials
T/OTOP 1011-2022 Footwear – Testing method of proportion of materials for uppers

ESDU - Engineering Sciences Data Unit, specific stiffness material

ESDU 89013 A-1991 Transverse (through-the-thickness) shear stiffnesses of fibre reinforced composite laminated plates.
ESDU 89013 B-2009 Transverse (through-the-thickness) shear stiffnesses of fibre reinforced composite laminated plates

(U.S.) Ford Automotive Standards, specific stiffness material

FORD FLTM EU BN 052-02-2001 STIFFNESS TEST FOR FIBRE PADDINGS
FORD FLTM EU BN 052-2-2001 STIFFNESS TEST FOR FIBRE PADDINGS
FORD ESF-M99G152-A-2000 CARBON BRUSH MATERIAL (2000-2500 MICRO OHM X CM SPECIFIC RESISTANCE)

Society of Automotive Engineers (SAE), specific stiffness material

SAE AMS3583B-1991 PLASTIC TUBING, ELECTRICAL INSULATION Crosslinked Polyvinyl Chloride, Semi-Rigid Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3583C-1992 PLASTIC TUBING, ELECTRICAL INSULATION Crosslinked Polyvinyl Chloride, Semi-Rigid Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3583A-1979 PLASTIC TUBING, ELECTRICAL INSULATION Crosslinked Polyvinyl Chloride, Semi-Rigid Heat Shrinkable 2 to 1 Shrink Ratio
SAE J380-2009 Specific Gravity of Friction Material
SAE AMS3632E-1995 TUBING, PLASTIC, ELECTRICAL INSULATION Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
SAE AMS3632D-1984 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3632C-1975 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE J380-2002 (R) Specific Gravity of Friction Material
SAE AMS-LP-391A-2011 Plastic Sheets, Rods and Tubing, Rigid Cast, Methacrylate (Multiapplicaton)
SAE AMS-L-P-391A-2011 Plastic Sheets, Rods and Tubing, Rigid Cast, Methacrylate (Multiapplication)
SAE AMS3638-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639E-1988 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639C-1975 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639D-1982 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3583-1969 PLASTIC TUBING, ELECTRICAL INSULATION Crosslinked Polyvinyl Chloride, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3638D-1981 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE AMS3638C-1971 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639A-1966 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3638A-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3638B-1967 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3639B-1967 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3632B-1967 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3632A-1966 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio

Standard Association of Australia （SAA）, specific stiffness material

AS/NZS 4257.9:1995 Plastic roof and wall cladding materials - Methods of test - Determination of transverse bending stiffness
AS/NZS 4063:1992 Timber - Stress-graded - In-grade strength and stiffness evaluation
AS 1580.202.3:2005 Paints and related materials - Methods of test - Determination of specific gravity of liquids by hydrometer

IN-BIS, specific stiffness material

American National Standards Institute （ANSI), specific stiffness material

ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ANSI/ASTM D2304:2010 TEST METHOD FOR THERMAL ENDURANCE OF RIGID ELECTRICAL INSULATING MATERIALS

GOSTR, specific stiffness material

GOST R 57844-2017 Composites. Determination of density by volumetric displacement - skeleton density by gas pycnometry
GOST R 56661-2019 Polymer composites. Method for determination of ？sandwich？ core materials Poisson's Ratio
GOST 33795-2016 Wood raw material, forest products, semi-produced materials and wood products. Admissible specific activity of radionuclides, samping and methods of measuring the specific activity of radionuclides

Taiwan Provincial Standard of the People's Republic of China, specific stiffness material

CNS 14818-2004 Method of test for density of smoke generated by solid materials -Specificoptical method of vertical type
CNS 13333-1994 Method of Test for the Density and Specific Gravity of Plastics
CNS 4448-1992 Method of Test for Stiffness in Torsion of Plastics as a Function of Temperature
CNS 2893-1969 Method of Test for Specific Gravity of Fired Fine Ceramic and Porcelain Material
CNS 14310-1999 Method of determining the plastic strain ratio for metallic sheet and strip

ES-AENOR, specific stiffness material

Military Standard of the People's Republic of China-General Armament Department, specific stiffness material

GJB 9908-2020 Specification for diamond/copper composite products
GJB 331-1987 Test method for specific heat capacity of solid materials 60-370K

IT-UNI, specific stiffness material

UNI 5615-1965
UNI 4285-1959
UNI 7277-1974
EC 1-2021 UNI EN ISO 10113:2021 Metallic materials - Sheet and strip - Determination of plastic strain ratio
UNI EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures

ES-UNE, specific stiffness material

UNE-EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
UNE-EN ISO 10113:2020 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2020, Corrected version 2020-11)
UNE-EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
UNE-EN 60893-3-1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets (Endorsed by AENOR in November of 2012.)
UNE-EN ISO 2440:2020 Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2019)
UNE-EN ISO 10619-2:2022 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)

Malaysia Standards, specific stiffness material

MS 980-1985

IPC - Association Connecting Electronics Industries, specific stiffness material

IPC TM-650 2.5.6B-1986 Dielectric Breakdown of Rigid Printed Wiring Material

PT-IPQ, specific stiffness material

NP 3359-1988 Plastics Evaluation of fire response of rigid cellular plastics using a small comer configuration

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, specific stiffness material

GB/T 35426.1-2017 Acoustics—Determination of dynamic stiffness—Part 1: Materials used under floating floors in dwellings

CH-SNV, specific stiffness material

SNV 40807 a-1959

US-FCR, specific stiffness material

FCR AF ETL 97-5-1997 PROPORTIONING CONCRETE MIXTURES WITH GRADED AGGREGATES FOR RIGID AIRFIELD PAVEMENTS

(U.S.) Parachute Industry Association, specific stiffness material

PIA-TEST METHOD-5202B-2013 STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD
PIA-TEST METHOD-5202B-2009 STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD

NL-NEN, specific stiffness material

NEN 5183-1990 Quarry stone and similar stony materials Determination of thickness and length ratio

BE-NBN, specific stiffness material

NBN T 03-484-1985 Carbonaceous materials for the production of aluminium - Pitch for electrodes-Determination of density-Pyknometric method

TH-TISI, specific stiffness material

TIS 2178-2012 Metallic materials.sheet and strip.determination of plastic strain ratio

United States Navy, specific stiffness material

NAVY MIL-HDBK-826-1991 DRYDOCKING TIMBERS AND BLOCKS, STRENGTH PROPERTIES OF

Professional Standard - Environmental Protection, specific stiffness material

HJ 456-2009 Technical requirement for environmental labding products.Rigid waterproof materials

工业和信息化部, specific stiffness material

JB/T 5205-2018 Superabrasive products diamond grinding tools for stone processing

Defense Logistics Agency, specific stiffness material

DLA L-P-535 E NOTICE 4-2012 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID

未注明发布机构, specific stiffness material

BS EN 1225:1996 Plastics piping systems - Glass - reinforced thermosetting plastics ( GRP ) pipes - Determination of the creep factor under wet conditions and calculation of the long - term specific ring stiffness
GJB 330A-2000 Test method for specific heat capacity of solid materials 60~2773K
JIS Z 2242:2023 Method for Charpy pendulum impact test of metallic materials

BR-ABNT, specific stiffness material

ABNT P-MB-520-1970
ABNT NBR 5992-2016 Fuel ethanol - Determination of the density and alcoholic content by hydrometer

TR-TSE, specific stiffness material

TS 1087-1972 METHOD OF TEST FOR SPBCIFIC GRAVTTY OF BnUMINOUS MATERIALS
TS 681-1969 PLASTICS DETERMINATION OF THE PERCENTAGE OF EXTRACTABLE MATERIALS ?N POLYAMIDES

AGMA - American Gear Manufacturers Association, specific stiffness material

92FTM6-1992 Comparison of Carburized Gear Materials in Pitting

Professional Standard - Aerospace, specific stiffness material

QJ 968-1986 Test method for low temperature specific heat capacity of solid materials
QJ 1521-1988 Test method for deep low temperature specific heat capacity of solid materials

国家市场监督管理总局、中国国家标准化管理委员会, specific stiffness material

GB/T 40071-2021 Nanotechnologies—Measurement of the number of layers of graphene-related two-dimensional (2D) materials—Optical contrast method
GB/T 229-2020 Metallic materials—Charpy pendulum impact test method

Professional Standard - Non-ferrous Metal, specific stiffness material

YS/T 63.8-2023 Carbonaceous materials used for the production of aluminium — Part 8:Determination of truth density — Pyknometric method
YS/T 63.9-2006 Carbonaceous materials used in the production of aluminium. Part 9:Determination of truth density by helium pyknometry method
YS/T 63.9-2012 Carbonaceous materials used in the production of aluminium.Part 9:Determination of truth density by helium pyknometry method

Canadian General Standards Board （CGSB), specific stiffness material

CGSB 1-GP-71 METH 14.7-1982 Methodes D'Essai Des Peintures Et Pigments Pouvoir Couvrant Methode Du Rapport De Contraste

International Electrotechnical Commission (IEC), specific stiffness material

IEC 60893-3-3:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins

US-AAMA, specific stiffness material

AAMA 311-2013 Voluntary Specification for Rigid Thermoplastic Cellulosic Composite Fenestration Exterior Profiles

AT-ON, specific stiffness material

ONORM EN 10045 Tell.1-1991 Metallic materials — Charpy impact test — Test method

American Gear Manufacturers Association, specific stiffness material

AGMA 92FTM6-1992 Comparison of Carburized Gear Materials in Pitting

未注明发布机构, specific stiffness material

BS EN 1225:1996 Plastics piping systems - Glass - reinforced thermosetting plastics ( GRP ) pipes - Determination of the creep factor under wet conditions and calculation of the long - term specific ring stiffness
GJB 330A-2000 Test method for specific heat capacity of solid materials 60~2773K
JIS Z 2242:2023 Method for Charpy pendulum impact test of metallic materials

Association of German Mechanical Engineers, specific stiffness material

DVS 0702-2 Beiblatt 1-1993

AIA/NAS - Aerospace Industries Association of America Inc., specific stiffness material

NAS244-1947 Cap - Rigid Tube or Hose Fitting Synthetic (Rev 2)